FreeBSD Manual Pages
SRC.CONF(5) File Formats Manual SRC.CONF(5) NAME src.conf -- source build options DESCRIPTION The src.conf file contains variables that control what components will be generated during the build process of the FreeBSD source tree; see build(7). The src.conf file uses the standard makefile syntax. However, src.conf should not specify any dependencies to make(1). Instead, src.conf is to set make(1) variables that control the aspects of how the system builds. The default location of src.conf is /etc/src.conf, though an alterna- tive location can be specified in the make(1) variable SRCCONF. Over- riding the location of src.conf may be necessary if the system-wide settings are not suitable for a particular build. For instance, set- ting SRCCONF to /dev/null effectively resets all build controls to their defaults. The only purpose of src.conf is to control the compilation of the FreeBSD source code, which is usually located in /usr/src. As a rule, the system administrator creates src.conf when the values of certain control variables need to be changed from their defaults. In addition, control variables can be specified for a particular build via the -D option of make(1) or in its environment; see environ(7). The environment of make(1) for the build can be controlled via the SRC_ENV_CONF variable, which defaults to /etc/src-env.conf. Some exam- ples that may only be set in this file are WITH_DIRDEPS_BUILD, and WITH_META_MODE, and MAKEOBJDIRPREFIX as they are environment-only vari- ables. The values of variables are ignored regardless of their setting; even if they would be set to "FALSE" or "NO". The presence of an option causes it to be honored by make(1). This list provides a name and short description for variables that can be used for source builds. WITHOUT_ACCT Do not build process accounting tools such as accton(8) and sa(8). WITHOUT_ACPI Do not build acpiconf(8), acpidump(8) and related programs. WITHOUT_APM Do not build apm(8), apmd(8) and related programs. WITH_ASAN Build the base system with Address Sanitizer (ASan) to detect memory corruption bugs such as buffer overflows or use-after- free. Requires that Clang be used as the base system compiler and that the runtime support library is available. When set, it enforces these options: WITH_LLVM_BINUTILS WITH_LLVM_CXXFILT WITHOUT_ASSERT_DEBUG Compile programs and libraries without the assert(3) checks. WITHOUT_AT Do not build at(1) and related utilities. WITHOUT_AUDIT Do not build audit support into system programs. WITHOUT_AUTHPF Do not build authpf(8). WITHOUT_AUTOFS Do not build autofs(5) related programs, libraries, and kernel modules. WITHOUT_AUTO_OBJ Disable automatic creation of objdirs. This is enabled by de- fault if the wanted OBJDIR is writable by the current user. This must be set in the environment, make command line, or /etc/src-env.conf, not /etc/src.conf. WITH_BEARSSL Build the BearSSL library. BearSSL is a tiny SSL library suitable for embedded environ- ments. For details see https://www.BearSSL.org/ This library is currently only used to perform signature veri- fication and related operations for Verified Exec and loader(8). When set, these options are also in effect: WITH_LOADER_EFI_SECUREBOOT (unless WITHOUT_LOADER_EFI_SECUREBOOT is set explicitly) WITH_LOADER_VERIEXEC (unless WITHOUT_LOADER_VERIEXEC is set ex- plicitly) WITH_LOADER_VERIEXEC_VECTX (unless WITHOUT_LOADER_VERIEXEC_VECTX is set explicitly) WITH_VERIEXEC (unless WITHOUT_VERIEXEC is set explicitly) WITHOUT_BHYVE Do not build or install bhyve(8), associated utilities, and ex- amples. This option only affects amd64/amd64. WITH_BHYVE_SNAPSHOT Include support for save and restore (snapshots) in bhyve(8) and bhyvectl(8). This option only affects amd64/amd64. WITH_BIND_NOW Build all binaries with the DF_BIND_NOW flag set to indicate that the run-time loader should perform all relocation process- ing at process startup rather than on demand. The combination of the BIND_NOW and RELRO options provide "full" Relocation Read-Only (RELRO) support. With full RELRO the entire GOT is made read-only after performing relocation at startup, avoiding GOT overwrite attacks. WITHOUT_BLACKLIST Set this if you do not want to build blacklistd(8) and blacklistctl(8). When set, these options are also in effect: WITHOUT_BLACKLIST_SUPPORT (unless WITH_BLACKLIST_SUPPORT is set explicitly) WITHOUT_BLACKLIST_SUPPORT Build some programs without libblacklist(3) support, like fingerd(8), ftpd(8), and sshd(8). WITHOUT_BLUETOOTH Do not build Bluetooth related kernel modules, programs and li- braries. WITHOUT_BOOT Do not build the boot blocks and loader. WITHOUT_BOOTPARAMD Do not build or install bootparamd(8). WITHOUT_BOOTPD Do not build or install bootpd(8). WITHOUT_BSDINSTALL Do not build bsdinstall(8), sade(8), and related programs. WITHOUT_BSD_CPIO Do not build the BSD licensed version of cpio based on libarchive(3). WITHOUT_BSNMP Do not build or install bsnmpd(1) and related libraries and data files. WITHOUT_BZIP2 Do not build contributed bzip2 software as a part of the base system. The option has no effect yet. When set, these options are also in effect: WITHOUT_BZIP2_SUPPORT (unless WITH_BZIP2_SUPPORT is set explic- itly) WITHOUT_BZIP2_SUPPORT Build some programs without optional bzip2 support. WITHOUT_CALENDAR Do not build calendar(1). WITHOUT_CAPSICUM This option has no effect. WITHOUT_CAROOT Do not add the trusted certificates from the Mozilla NSS bundle to base. WITHOUT_CASPER This option has no effect. WITH_CCACHE_BUILD Use ccache(1) for the build. No configuration is required ex- cept to install the devel/ccache package. When using with distcc(1), set CCACHE_PREFIX=/usr/local/bin/distcc. The de- fault cache directory of $HOME/.ccache will be used, which can be overridden by setting CCACHE_DIR. The CCACHE_COMPILERCHECK option defaults to content when using the in-tree bootstrap compiler, and mtime when using an external compiler. The CCACHE_CPP2 option is used for Clang but not GCC. Sharing a cache between multiple work directories requires us- ing a layout similar to /some/prefix/src /some/prefix/obj and an environment such as: CCACHE_BASEDIR='${SRCTOP:H}' MAKEOBJDIRPREFIX='${SRCTOP:H}/obj' See ccache(1) for more configuration options. WITHOUT_CCD Do not build geom_ccd(4) and related utilities. WITHOUT_CDDL Do not build code licensed under Sun's CDDL. When set, it en- forces these options: WITHOUT_CTF WITHOUT_DTRACE WITHOUT_LOADER_ZFS WITHOUT_ZFS WITHOUT_CLANG Do not build the Clang C/C++ compiler during the regular phase of the build. When set, it enforces these options: WITHOUT_CLANG_EXTRAS WITHOUT_CLANG_FORMAT WITHOUT_CLANG_FULL WITHOUT_LLVM_COV When set, these options are also in effect: WITHOUT_LLVM_TARGET_AARCH64 (unless WITH_LLVM_TARGET_AARCH64 is set explicitly) WITHOUT_LLVM_TARGET_ALL (unless WITH_LLVM_TARGET_ALL is set ex- plicitly) WITHOUT_LLVM_TARGET_ARM (unless WITH_LLVM_TARGET_ARM is set ex- plicitly) WITHOUT_LLVM_TARGET_POWERPC (unless WITH_LLVM_TARGET_POWERPC is set explicitly) WITHOUT_LLVM_TARGET_RISCV (unless WITH_LLVM_TARGET_RISCV is set explicitly) WITHOUT_CLANG_BOOTSTRAP Do not build the Clang C/C++ compiler during the bootstrap phase of the build. To be able to build the system, either gcc or clang bootstrap must be enabled unless an alternate compiler is provided via XCC. WITH_CLANG_EXTRAS Build additional clang and llvm tools, such as bugpoint and clang-format. WITH_CLANG_FORMAT Build clang-format. WITHOUT_CLANG_FULL Avoid building the ARCMigrate, Rewriter and StaticAnalyzer com- ponents of the Clang C/C++ compiler. WITHOUT_CLEAN Do not clean before building world and/or kernel. WITHOUT_CPP Do not build cpp(1). WITHOUT_CROSS_COMPILER Do not build any cross compiler in the cross-tools stage of buildworld. When compiling a different version of FreeBSD than what is installed on the system, provide an alternate compiler with XCC to ensure success. When compiling with an identical version of FreeBSD to the host, this option may be safely used. This option may also be safe when the host version of FreeBSD is close to the sources being built, but all bets are off if there have been any changes to the toolchain between the ver- sions. When set, it enforces these options: WITHOUT_CLANG_BOOTSTRAP WITHOUT_ELFTOOLCHAIN_BOOTSTRAP WITHOUT_LLD_BOOTSTRAP WITHOUT_CRYPT Do not build any crypto code. When set, it enforces these op- tions: WITHOUT_DMAGENT WITHOUT_KERBEROS WITHOUT_KERBEROS_SUPPORT WITHOUT_LDNS WITHOUT_LDNS_UTILS WITHOUT_LOADER_ZFS WITHOUT_OPENSSH WITHOUT_OPENSSL WITHOUT_OPENSSL_KTLS WITHOUT_PKGBOOTSTRAP WITHOUT_UNBOUND WITHOUT_ZFS When set, these options are also in effect: WITHOUT_GSSAPI (unless WITH_GSSAPI is set explicitly) WITH_CTF Compile with CTF (Compact C Type Format) data. CTF data encap- sulates a reduced form of debugging information similar to DWARF and the venerable stabs and is required for DTrace. WITHOUT_CUSE Do not build CUSE-related programs and libraries. WITHOUT_CXGBETOOL Do not build cxgbetool(8) This is a default setting on arm/armv7, powerpc/powerpc and riscv/riscv64. WITH_CXGBETOOL Build cxgbetool(8) This is a default setting on amd64/amd64, arm64/aarch64, i386/i386, powerpc/powerpc64 and powerpc/powerpc64le. WITHOUT_DEBUG_FILES Avoid building or installing standalone debug files for each executable binary and shared library. WITH_DETECT_TZ_CHANGES Make the time handling code detect changes to the timezone files. WITHOUT_DIALOG Do not build dialog(1), dialog(3), dpv(1), and dpv(3). When set, it enforces these options: WITHOUT_BSDINSTALL WITHOUT_DICT Do not build the Webster dictionary files. WITH_DIRDEPS_BUILD This is an alternate build system. For details see https://www.crufty.net/sjg/docs/freebsd-meta-mode.htm. Build commands can be seen from the top-level with: make show-valid-targets The build is driven by dirdeps.mk using DIRDEPS stored in Make- file.depend files found in each directory. The build can be started from anywhere, and behaves the same. The initial instance of make(1) recursively reads DIRDEPS from Makefile.depend, computing a graph of tree dependencies from the current origin. Setting NO_DIRDEPS skips checking dirdep dependencies and will only build in the current and child di- rectories. NO_DIRDEPS_BELOW skips building any dirdeps and only build the current directory. This also utilizes the WITH_META_MODE logic for incremental builds. The build hides commands executed unless NO_SILENT is defined. Note that there is currently no mass install feature for this. This build is designed for producing packages, that can then be installed on a target system. The implementation in FreeBSD is incomplete. Completion would require leaf directories for building each kernel and package so that their dependencies can be tracked. When set, it en- forces these options: WITH_INSTALL_AS_USER When set, these options are also in effect: WITH_META_ERROR_TARGET (unless WITHOUT_META_ERROR_TARGET is set explicitly) WITH_META_MODE (unless WITHOUT_META_MODE is set explicitly) WITH_STAGING (unless WITHOUT_STAGING is set explicitly) WITH_STAGING_MAN (unless WITHOUT_STAGING_MAN is set explicitly) WITH_STAGING_PROG (unless WITHOUT_STAGING_PROG is set explic- itly) WITH_SYSROOT (unless WITHOUT_SYSROOT is set explicitly) This must be set in the environment, make command line, or /etc/src-env.conf, not /etc/src.conf. WITH_DIRDEPS_CACHE Cache result of dirdeps.mk which can save significant time for subsequent builds. Depends on WITH_DIRDEPS_BUILD. This must be set in the environment, make command line, or /etc/src-env.conf, not /etc/src.conf. WITH_DISK_IMAGE_TOOLS_BOOTSTRAP Build etdump(1), makefs(8) and mkimg(1) as bootstrap tools. WITHOUT_DMAGENT Do not build dma Mail Transport Agent. WITHOUT_DOCCOMPRESS Do not install compressed system documentation. Only the un- compressed version will be installed. WITHOUT_DTRACE Do not build DTrace framework kernel modules, libraries, and user commands. When set, it enforces these options: WITHOUT_CTF WITH_DTRACE_ASAN Compile userspace DTrace code (libdtrace, dtrace(1), lock- stat(1), plockstat(1)) with address and undefined behavior san- itizers. Requires that Clang be used as the base system com- piler and that the runtime support library is available. WITH_DTRACE_TESTS Build and install the DTrace test suite in /usr/tests/cddl/usr.sbin/dtrace. This test suite is considered experimental on architectures other than amd64/amd64 and run- ning it may cause system instability. WITHOUT_DYNAMICROOT Set this if you do not want to link /bin and /sbin dynamically. WITHOUT_EE Do not build and install edit(1), ee(1), and related programs. WITHOUT_EFI Set not to build efivar(3) and efivar(8). This is a default setting on i386/i386, powerpc/powerpc, pow- erpc/powerpc64, powerpc/powerpc64le and riscv/riscv64. WITH_EFI Build efivar(3) and efivar(8). This is a default setting on amd64/amd64, arm/armv7 and arm64/aarch64. WITHOUT_ELFTOOLCHAIN_BOOTSTRAP Do not build ELF Tool Chain tools (addr2line, nm, size, strings and strip) as part of the bootstrap process. An alternate bootstrap tool chain must be provided. WITHOUT_EXAMPLES Avoid installing examples to /usr/share/examples/. WITH_EXPERIMENTAL Include experimental features in the build. WITH_EXTRA_TCP_STACKS Build extra TCP stack modules. WITHOUT_FDT Do not build Flattened Device Tree support as part of the base system. This includes the device tree compiler (dtc) and libfdt support library. This is a default setting on amd64/amd64 and i386/i386. WITH_FDT Build Flattened Device Tree support as part of the base system. This includes the device tree compiler (dtc) and libfdt support library. This is a default setting on arm/armv7, arm64/aarch64, pow- erpc/powerpc, powerpc/powerpc64, powerpc/powerpc64le and riscv/riscv64. WITHOUT_FILE Do not build file(1) and related programs. WITHOUT_FINGER Do not build or install finger(1) and fingerd(8). WITHOUT_FLOPPY Do not build or install programs for operating floppy disk dri- ver. WITHOUT_FORMAT_EXTENSIONS Do not enable -fformat-extensions when compiling the kernel. Also disables all format checking. WITHOUT_FORTH Build bootloaders without Forth support. WITHOUT_FP_LIBC Build libc without floating-point support. WITHOUT_FREEBSD_UPDATE Do not build freebsd-update(8). WITHOUT_FTP Do not build or install ftp(1) and ftpd(8). WITHOUT_GAMES Do not build games. WITHOUT_GH_BC Install the traditional FreeBSD bc(1) and dc(1) programs in- stead of the enhanced versions. WITHOUT_GNU_DIFF Do not build GNU diff3(1). WITHOUT_GOOGLETEST Neither build nor install library "libgmock", library "libgtest", and dependent tests. WITHOUT_GPIO Do not build gpioctl(8) as part of the base system. WITHOUT_GSSAPI Do not build libgssapi. WITHOUT_HAST Do not build hastd(8) and related utilities. WITH_HESIOD Build Hesiod support. WITHOUT_HTML Do not build HTML docs. WITHOUT_HYPERV Do not build or install HyperV utilities. This is a default setting on arm/armv7, powerpc/powerpc, pow- erpc/powerpc64, powerpc/powerpc64le and riscv/riscv64. WITH_HYPERV Build or install HyperV utilities. This is a default setting on amd64/amd64, arm64/aarch64 and i386/i386. WITHOUT_ICONV Do not build iconv as part of libc. WITHOUT_INCLUDES Do not install header files. This option used to be spelled NO_INCS. The option does not work for build targets. WITHOUT_INET Do not build programs and libraries related to IPv4 networking. When set, it enforces these options: WITHOUT_INET_SUPPORT WITHOUT_INET6 Do not build programs and libraries related to IPv6 networking. When set, it enforces these options: WITHOUT_INET6_SUPPORT WITHOUT_INET6_SUPPORT Build libraries, programs, and kernel modules without IPv6 sup- port. WITHOUT_INETD Do not build inetd(8). WITHOUT_INET_SUPPORT Build libraries, programs, and kernel modules without IPv4 sup- port. WITH_INIT_ALL_PATTERN Build the base system or kernel with stack variables initial- ized to (compiler defined) debugging patterns on function en- try. This option requires the clang compiler. WITH_INIT_ALL_ZERO Build the base system or kernel with stack variables initial- ized to zero on function entry. This option requires that the clang compiler be used. WITHOUT_INSTALLLIB Set this to not install optional libraries. For example, when creating a nanobsd(8) image. The option does not work for build targets. WITH_INSTALL_AS_USER Make install targets succeed for non-root users by installing files with owner and group attributes set to that of the user running the make(1) command. The user still must set the DESTDIR variable to point to a directory where the user has write permissions. WITHOUT_IPFILTER Do not build IP Filter package. WITHOUT_IPFW Do not build IPFW tools. WITHOUT_IPSEC_SUPPORT Do not build the kernel with ipsec(4) support. This option is needed for ipsec(4) and tcpmd5(4). WITHOUT_ISCSI Do not build iscsid(8) and related utilities. WITHOUT_JAIL Do not build tools for the support of jails; e.g., jail(8). WITHOUT_KDUMP Do not build kdump(1) and truss(1). WITHOUT_KERBEROS Set this to not build Kerberos 5 (KTH Heimdal). When set, these options are also in effect: WITHOUT_GSSAPI (unless WITH_GSSAPI is set explicitly) WITHOUT_KERBEROS_SUPPORT (unless WITH_KERBEROS_SUPPORT is set explicitly) WITHOUT_KERBEROS_SUPPORT Build some programs without Kerberos support, like ssh(1), telnet(1), and sshd(8). WITH_KERNEL_RETPOLINE Enable the "retpoline" mitigation for CVE-2017-5715 in the ker- nel build. WITHOUT_KERNEL_SYMBOLS Do not install standalone kernel debug symbol files. This op- tion has no effect at build time. WITHOUT_KVM Do not build the libkvm library as a part of the base system. The option has no effect yet. When set, these options are also in effect: WITHOUT_KVM_SUPPORT (unless WITH_KVM_SUPPORT is set explicitly) WITHOUT_KVM_SUPPORT Build some programs without optional libkvm support. WITHOUT_LDNS Setting this variable will prevent the LDNS library from being built. When set, it enforces these options: WITHOUT_LDNS_UTILS WITHOUT_UNBOUND WITHOUT_LDNS_UTILS Setting this variable will prevent building the LDNS utilities drill(1) and host(1). WITHOUT_LEGACY_CONSOLE Do not build programs that support a legacy PC console; e.g., kbdcontrol(1) and vidcontrol(1). WITHOUT_LIB32 On 64-bit platforms, do not build 32-bit library set and a ld-elf32.so.1 runtime linker. This is a default setting on arm/armv7, i386/i386, powerpc/pow- erpc, powerpc/powerpc64le and riscv/riscv64. WITH_LIB32 On 64-bit platforms, build the 32-bit library set and a ld-elf32.so.1 runtime linker. This is a default setting on amd64/amd64, arm64/aarch64 and powerpc/powerpc64. WITHOUT_LLD Do not build LLVM's lld linker. WITHOUT_LLDB Do not build the LLDB debugger. This is a default setting on arm/armv7 and riscv/riscv64. WITH_LLDB Build the LLDB debugger. This is a default setting on amd64/amd64, arm64/aarch64, i386/i386, powerpc/powerpc, powerpc/powerpc64 and powerpc/pow- erpc64le. WITHOUT_LLD_BOOTSTRAP Do not build the LLD linker during the bootstrap phase of the build. To be able to build the system an alternate linker must be provided via XLD. WITHOUT_LLD_IS_LD Do not install a /usr/bin/ld symlink to ld.lld. The system will not have a usable tool chain unless a linker is provided some other way. WITH_LLVM_ASSERTIONS Enable debugging assertions in LLVM. WITH_LLVM_BINUTILS Install LLVM's binutils (without an llvm- prefix), instead of ELF Tool Chain's tools. This includes addr2line(1), ar(1), nm(1), objcopy(1), ranlib(1), readelf(1), size(1), and strip(1). Regardless of this setting, LLVM tools are used for c++filt(1) and objdump(1). strings(1) is always provided by ELF Tool Chain. WITHOUT_LLVM_COV Do not build the llvm-cov(1) tool. WITHOUT_LLVM_CXXFILT Install ELF Tool Chain's cxxfilt as c++filt, instead of LLVM's llvm-cxxfilt. WITHOUT_LLVM_TARGET_AARCH64 Do not build LLVM target support for AArch64. The LLVM_TARGET_ALL option should be used rather than this in most cases. WITHOUT_LLVM_TARGET_ALL Only build the required LLVM target support. This option is preferred to specific target support options. When set, these options are also in effect: WITHOUT_LLVM_TARGET_AARCH64 (unless WITH_LLVM_TARGET_AARCH64 is set explicitly) WITHOUT_LLVM_TARGET_ARM (unless WITH_LLVM_TARGET_ARM is set ex- plicitly) WITHOUT_LLVM_TARGET_POWERPC (unless WITH_LLVM_TARGET_POWERPC is set explicitly) WITHOUT_LLVM_TARGET_RISCV (unless WITH_LLVM_TARGET_RISCV is set explicitly) WITHOUT_LLVM_TARGET_ARM Do not build LLVM target support for ARM. The LLVM_TARGET_ALL option should be used rather than this in most cases. WITH_LLVM_TARGET_BPF Build LLVM target support for BPF. The LLVM_TARGET_ALL option should be used rather than this in most cases. WITH_LLVM_TARGET_MIPS Build LLVM target support for MIPS. The LLVM_TARGET_ALL option should be used rather than this in most cases. WITHOUT_LLVM_TARGET_POWERPC Do not build LLVM target support for PowerPC. The LLVM_TARGET_ALL option should be used rather than this in most cases. WITHOUT_LLVM_TARGET_RISCV Do not build LLVM target support for RISC-V. The LLVM_TARGET_ALL option should be used rather than this in most cases. WITHOUT_LLVM_TARGET_X86 Do not build LLVM target support for X86. The LLVM_TARGET_ALL option should be used rather than this in most cases. WITH_LOADER_EFI_SECUREBOOT Enable building loader(8) with support for verification based on certificates obtained from UEFI. WITHOUT_LOADER_GELI Disable inclusion of GELI crypto support in the boot chain bi- naries. This is a default setting on powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpc64le. WITH_LOADER_GELI Build GELI bootloader support. This is a default setting on amd64/amd64, arm/armv7, arm64/aarch64, i386/i386 and riscv/riscv64. WITHOUT_LOADER_KBOOT Do not build kboot, a linuxboot environment loader This is a default setting on arm/armv7, i386/i386, powerpc/pow- erpc, powerpc/powerpc64le and riscv/riscv64. WITH_LOADER_KBOOT Build kboot, a linuxboot environment loader This is a default setting on amd64/amd64, arm64/aarch64 and powerpc/powerpc64. WITHOUT_LOADER_LUA Do not build LUA bindings for the boot loader. This is a default setting on powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpc64le. WITH_LOADER_LUA Build LUA bindings for the boot loader. This is a default setting on amd64/amd64, arm/armv7, arm64/aarch64, i386/i386 and riscv/riscv64. WITHOUT_LOADER_OFW Disable building of openfirmware bootloader components. This is a default setting on amd64/amd64, arm/armv7, arm64/aarch64, i386/i386 and riscv/riscv64. WITH_LOADER_OFW Build openfirmware bootloader components. This is a default setting on powerpc/powerpc, powerpc/powerpc64 and powerpc/powerpc64le. WITHOUT_LOADER_UBOOT Disable building of ubldr. This is a default setting on amd64/amd64, arm64/aarch64, i386/i386, powerpc/powerpc64le and riscv/riscv64. WITH_LOADER_UBOOT Build ubldr. This is a default setting on arm/armv7, powerpc/powerpc and powerpc/powerpc64. WITH_LOADER_VERBOSE Build with extra verbose debugging in the loader. May explode already nearly too large loader over the limit. Use with care. WITH_LOADER_VERIEXEC Enable building loader(8) with support for verification similar to Verified Exec. Depends on WITH_BEARSSL. When set, these options are also in effect: WITH_LOADER_EFI_SECUREBOOT (unless WITHOUT_LOADER_EFI_SECUREBOOT is set explicitly) WITH_LOADER_VERIEXEC_VECTX (unless WITHOUT_LOADER_VERIEXEC_VECTX is set explicitly) WITH_LOADER_VERIEXEC_PASS_MANIFEST Enable building loader(8) with support to pass a verified mani- fest to the kernel. The kernel has to be built with a module to parse the manifest. Depends on WITH_LOADER_VERIEXEC. WITH_LOADER_VERIEXEC_VECTX Enable building loader(8) with support for hashing and verify- ing kernel and modules as a side effect of loading. Depends on WITH_LOADER_VERIEXEC. WITHOUT_LOADER_ZFS Do not build ZFS file system boot loader support. WITHOUT_LOCALES Do not build localization files; see locale(1). WITHOUT_LOCATE Do not build locate(1) and related programs. WITHOUT_LPR Do not build lpr(1) and related programs. WITHOUT_LS_COLORS Build ls(1) without support for colors to distinguish file types. WITHOUT_MACHDEP_OPTIMIZATIONS Prefer machine-independent non-assembler code in libc and libm. WITHOUT_MAIL Do not build any mail support (MUA or MTA). When set, it en- forces these options: WITHOUT_DMAGENT WITHOUT_MAILWRAPPER WITHOUT_SENDMAIL WITHOUT_MAILWRAPPER Do not build the mailwrapper(8) MTA selector. WITHOUT_MAKE Do not install make(1) and related support files. WITHOUT_MAKE_CHECK_USE_SANDBOX Do not execute "make check" in limited sandbox mode. This op- tion should be paired with WITH_INSTALL_AS_USER if executed as an unprivileged user. See tests(7) for more details. WITH_MALLOC_PRODUCTION Disable assertions and statistics gathering in malloc(3). It also defaults the A and J runtime options to off. WITHOUT_MAN Do not build manual pages. When set, these options are also in effect: WITHOUT_MAN_UTILS (unless WITH_MAN_UTILS is set explicitly) WITHOUT_MANCOMPRESS Do not install compressed man pages. Only the uncompressed versions will be installed. WITH_MANSPLITPKG Split man pages into their own packages during make package. WITHOUT_MAN_UTILS Do not build utilities for manual pages, apropos(1), makewhatis(1), man(1), whatis(1), manctl(8), and related sup- port files. WITH_META_ERROR_TARGET Enable the META_MODE .ERROR target. This target will copy the meta file of a failed target to ERROR_LOGDIR (default is `${SRCTOP:H}/error') to help with failure analysis. Depends on WITH_META_MODE. This default when WITH_DIRDEPS_BUILD is set. This must be set in the environment, make command line, or /etc/src-env.conf, not /etc/src.conf. WITH_META_MODE Create make(1) meta files when building, which can provide a reliable incremental build when using filemon(4). The meta file is created in OBJDIR as target.meta. These meta files track the command that was executed, its output, and the cur- rent directory. The filemon(4) module is required unless NO_FILEMON is defined. When the module is loaded, any files used by the commands executed are tracked as dependencies for the target in its meta file. The target is considered out-of- date and rebuilt if any of these conditions are true compared to the last build: o The command to execute changes. o The current working directory changes. o The target's meta file is missing. o The target's meta file is missing filemon data when filemon is loaded and a previous run did not have it loaded. o [requires filemon(4)] Files read, executed or linked to are newer than the target. o [requires filemon(4)] Files read, written, executed or linked are missing. The meta files can also be useful for debugging. The build hides commands that are executed unless NO_SILENT is defined. Errors cause make(1) to show some of its environment for further debugging. The build operates as it normally would otherwise. This option originally invoked a different build system but that was re- named to WITH_DIRDEPS_BUILD. This must be set in the environment, make command line, or /etc/src-env.conf, not /etc/src.conf. WITHOUT_MLX5TOOL Do not build mlx5tool(8) This is a default setting on arm/armv7, powerpc/powerpc and riscv/riscv64. WITH_MLX5TOOL Build mlx5tool(8) This is a default setting on amd64/amd64, arm64/aarch64, i386/i386, powerpc/powerpc64 and powerpc/powerpc64le. WITHOUT_NETCAT Do not build nc(1) utility. WITHOUT_NETGRAPH Do not build applications to support netgraph(4). When set, it enforces these options: WITHOUT_BLUETOOTH When set, these options are also in effect: WITHOUT_NETGRAPH_SUPPORT (unless WITH_NETGRAPH_SUPPORT is set explicitly) WITHOUT_NETGRAPH_SUPPORT Build libraries, programs, and kernel modules without netgraph support. WITHOUT_NETLINK Do not build genl(1) utility. WITHOUT_NETLINK_SUPPORT Make libraries and programs use rtsock and sysctl(3) interfaces instead of snl(3). WITHOUT_NIS Do not build NIS(8) support and related programs. If set, you might need to adopt your nsswitch.conf(5) and remove `nis' en- tries. WITHOUT_NLS Do not build NLS catalogs. When set, it enforces these op- tions: WITHOUT_NLS_CATALOGS WITHOUT_NLS_CATALOGS Do not build NLS catalog support for csh(1). WITHOUT_NS_CACHING Disable name caching in the nsswitch subsystem. The generic caching daemon, nscd(8), will not be built either if this op- tion is set. WITHOUT_NTP Do not build ntpd(8) and related programs. WITHOUT_NVME Do not build nvme related tools and kernel modules. This is a default setting on arm/armv7, powerpc/powerpc and riscv/riscv64. WITH_NVME Build nvme related tools and kernel modules. This is a default setting on amd64/amd64, arm64/aarch64, i386/i386, powerpc/powerpc64 and powerpc/powerpc64le. WITHOUT_OFED Do not build the "OpenFabrics Enterprise Distribution" Infini- Band software stack, including kernel modules and userspace li- braries. This is a default setting on arm/armv7. When set, it enforces these options: WITHOUT_OFED_EXTRA WITH_OFED Build the "OpenFabrics Enterprise Distribution" InfiniBand software stack, including kernel modules and userspace li- braries. This is a default setting on amd64/amd64, arm64/aarch64, i386/i386, powerpc/powerpc, powerpc/powerpc64, powerpc/pow- erpc64le and riscv/riscv64. WITH_OFED_EXTRA Build the non-essential components of the "OpenFabrics Enterprise Distribution" Infiniband software stack, mostly ex- amples. WITH_OPENLDAP Enable building LDAP support for kerberos using an openldap client from ports. WITHOUT_OPENMP Do not build LLVM's OpenMP runtime. This is a default setting on arm/armv7 and powerpc/powerpc. WITH_OPENMP Build LLVM's OpenMP runtime. This is a default setting on amd64/amd64, arm64/aarch64, i386/i386, powerpc/powerpc64, powerpc/powerpc64le and riscv/riscv64. WITHOUT_OPENSSH Do not build OpenSSH. WITHOUT_OPENSSL Do not build OpenSSL. When set, it enforces these options: WITHOUT_DMAGENT WITHOUT_KERBEROS WITHOUT_KERBEROS_SUPPORT WITHOUT_LDNS WITHOUT_LDNS_UTILS WITHOUT_LOADER_ZFS WITHOUT_OPENSSH WITHOUT_OPENSSL_KTLS WITHOUT_PKGBOOTSTRAP WITHOUT_UNBOUND WITHOUT_ZFS When set, these options are also in effect: WITHOUT_GSSAPI (unless WITH_GSSAPI is set explicitly) WITHOUT_OPENSSL_KTLS Do not include kernel TLS support in OpenSSL. This is a default setting on arm/armv7, i386/i386, powerpc/pow- erpc and riscv/riscv64. WITH_OPENSSL_KTLS Include kernel TLS support in OpenSSL. This is a default setting on amd64/amd64, arm64/aarch64, pow- erpc/powerpc64 and powerpc/powerpc64le. WITHOUT_PAM Do not build PAM library and modules. This option is depre- cated and does nothing. When set, these options are also in effect: WITHOUT_PAM_SUPPORT (unless WITH_PAM_SUPPORT is set explicitly) WITHOUT_PAM_SUPPORT Build some programs without PAM support, particularly ftpd(8) and ppp(8). WITHOUT_PF Do not build PF firewall package. When set, it enforces these options: WITHOUT_AUTHPF WITHOUT_PIE Do not build dynamically linked binaries as Position-Indepen- dent Executable (PIE). This is a default setting on arm/armv7, i386/i386 and pow- erpc/powerpc. WITH_PIE Build dynamically linked binaries as Position-Independent Exe- cutable (PIE). This is a default setting on amd64/amd64, arm64/aarch64, pow- erpc/powerpc64, powerpc/powerpc64le and riscv/riscv64. WITHOUT_PKGBOOTSTRAP Do not build pkg(7) bootstrap tool. WITHOUT_PMC Do not build pmccontrol(8) and related programs. WITHOUT_PPP Do not build ppp(8) and related programs. WITH_PROFILE Build profiled libraries for use with gprof(8). This option is deprecated and may not be present in a future version of FreeBSD. WITHOUT_PTHREADS_ASSERTIONS Disable debugging assertions in pthreads library. WITHOUT_QUOTAS Do not build quota(1) and related programs. WITHOUT_RADIUS_SUPPORT Do not build radius support into various applications, like pam_radius(8) and ppp(8). WITH_RATELIMIT Build the system with rate limit support. This makes SO_MAX_PACING_RATE effective in getsockopt(2), and txrlimit support in ifconfig(8), by proxy. WITHOUT_RBOOTD Do not build or install rbootd(8). WITHOUT_RELRO Do not apply the Relocation Read-Only (RELRO) vulnerability mitigation. See also the BIND_NOW option. WITH_REPRODUCIBLE_BUILD Exclude build metadata (such as the build time, user, or host) from the kernel, boot loaders, and uname output, so that builds produce bit-for-bit identical output. WITHOUT_RESCUE Do not build rescue(8). WITH_RETPOLINE Build the base system with the retpoline speculative execution vulnerability mitigation for CVE-2017-5715. WITHOUT_ROUTED Do not build routed(8) utility. WITH_RPCBIND_WARMSTART_SUPPORT Build rpcbind(8) with warmstart support. WITHOUT_SCTP_SUPPORT Disable support in the kernel for the sctp(4) Stream Control Transmission Protocol loadable kernel module. WITHOUT_SENDMAIL Do not build sendmail(8) and related programs. WITHOUT_SERVICESDB Do not install /var/db/services.db. WITHOUT_SETUID_LOGIN Set this to disable the installation of login(1) as a set-user- ID root program. WITHOUT_SHAREDOCS Do not build the 4.4BSD legacy docs. WITH_SORT_THREADS Enable threads in sort(1). WITHOUT_SOURCELESS Do not build kernel modules that include sourceless code (ei- ther microcode or native code for host CPU). When set, it en- forces these options: WITHOUT_SOURCELESS_HOST WITHOUT_SOURCELESS_UCODE WITHOUT_SOURCELESS_HOST Do not build kernel modules that include sourceless native code for host CPU. WITHOUT_SOURCELESS_UCODE Do not build kernel modules that include sourceless microcode. WITHOUT_SPLIT_KERNEL_DEBUG Do not build standalone kernel debug files. Debug data (if en- abled by the kernel configuration file) will be included in the kernel and modules. When set, it enforces these options: WITHOUT_KERNEL_SYMBOLS WITHOUT_SSP Do not build world with propolice stack smashing protection. WITH_STAGING Enable staging of files to a stage tree. This can be best thought of as auto-install to DESTDIR with some extra meta data to ensure dependencies can be tracked. Depends on WITH_DIRDEPS_BUILD. When set, these options are also in ef- fect: WITH_STAGING_MAN (unless WITHOUT_STAGING_MAN is set explicitly) WITH_STAGING_PROG (unless WITHOUT_STAGING_PROG is set explic- itly) This must be set in the environment, make command line, or /etc/src-env.conf, not /etc/src.conf. WITH_STAGING_MAN Enable staging of man pages to stage tree. WITH_STAGING_PROG Enable staging of PROGs to stage tree. WITH_STALE_STAGED Check staged files are not stale. WITHOUT_STATS Neither build nor install library "libstats" and dependent bi- naries. WITHOUT_SYSCONS Do not build syscons(4) support files such as keyboard maps, fonts, and screen output maps. WITH_SYSROOT Enable use of sysroot during build. Depends on WITH_DIRDEPS_BUILD. This must be set in the environment, make command line, or /etc/src-env.conf, not /etc/src.conf. WITHOUT_SYSTEM_COMPILER Do not opportunistically skip building a cross-compiler during the bootstrap phase of the build. Normally, if the currently installed compiler matches the planned bootstrap compiler type and revision, then it will not be built. This does not prevent a compiler from being built for installation though, only for building one for the build itself. The WITHOUT_CLANG option controls that. WITHOUT_SYSTEM_LINKER Do not opportunistically skip building a cross-linker during the bootstrap phase of the build. Normally, if the currently installed linker matches the planned bootstrap linker type and revision, then it will not be built. This does not prevent a linker from being built for installation though, only for building one for the build itself. The WITHOUT_LLD option con- trols that. This option is only relevant when WITH_LLD_BOOTSTRAP is set. WITHOUT_TALK Do not build or install talk(1) and talkd(8). WITHOUT_TCP_WRAPPERS Do not build or install tcpd(8), and related utilities. WITHOUT_TCSH Do not build and install /bin/csh (which is tcsh(1)). WITHOUT_TELNET Do not build telnet(1) and related programs. WITHOUT_TESTS Do not build nor install the FreeBSD Test Suite in /usr/tests/. See tests(7) for more details. This also disables the build of all test-related dependencies, including ATF. When set, it en- forces these options: WITHOUT_DTRACE_TESTS When set, these options are also in effect: WITHOUT_GOOGLETEST (unless WITH_GOOGLETEST is set explicitly) WITHOUT_TESTS_SUPPORT (unless WITH_TESTS_SUPPORT is set explic- itly) WITHOUT_TESTS_SUPPORT Disable the build of all test-related dependencies, including ATF. When set, it enforces these options: WITHOUT_GOOGLETEST WITHOUT_TEXTPROC Do not build programs used for text processing. WITHOUT_TFTP Do not build or install tftp(1) and tftpd(8). WITHOUT_TOOLCHAIN Do not install programs used for program development, compil- ers, debuggers etc. When set, it enforces these options: WITHOUT_CLANG WITHOUT_CLANG_EXTRAS WITHOUT_CLANG_FORMAT WITHOUT_CLANG_FULL WITHOUT_LLD WITHOUT_LLDB WITHOUT_LLVM_COV WITH_UBSAN Build the base system with Undefined Behavior Sanitizer (UBSan) to detect various kinds of undefined behavior at runtime. Re- quires that Clang be used as the base system compiler and that the runtime support library is available WITHOUT_UNBOUND Do not build unbound(8) and related programs. WITHOUT_UNIFIED_OBJDIR Use the historical object directory format for build(7) tar- gets. For native-builds and builds done directly in sub-direc- tories the format of ${MAKEOBJDIRPREFIX}/${.CURDIR} is used, while for cross-builds ${MAKEOBJDIRPREFIX}/${TARGET}.${TARGET_ARCH}/${.CURDIR} is used. This option is transitional and will be removed in a future version of FreeBSD, at which time WITH_UNIFIED_OBJDIR will be enabled permanently. This must be set in the environment, make command line, or /etc/src-env.conf, not /etc/src.conf. WITHOUT_USB Do not build USB-related programs and libraries. WITHOUT_USB_GADGET_EXAMPLES Do not build USB gadget kernel modules. WITHOUT_UTMPX Do not build user accounting tools such as last(1), users(1), who(1), ac(8), lastlogin(8) and utx(8). WITH_VERIEXEC Enable building veriexec(8) which loads the contents of veri- fied manifests into the kernel for use by mac_veriexec(4) Depends on WITH_BEARSSL. WITHOUT_VI Do not build and install vi, view, ex and related programs. WITHOUT_VT Do not build vt(4) support files (fonts and keymaps). WITHOUT_WARNS Set this to not add warning flags to the compiler invocations. Useful as a temporary workaround when code enters the tree which triggers warnings in environments that differ from the original developer. WITHOUT_WERROR Set this to not treat compiler warnings as errors. Useful as a temporary workaround when working on fixing compiler warnings. When set, warnings are still printed in the build log but do not fail the build. WITHOUT_WIRELESS Do not build programs used for 802.11 wireless networks; espe- cially wpa_supplicant(8) and hostapd(8). When set, these op- tions are also in effect: WITHOUT_WIRELESS_SUPPORT (unless WITH_WIRELESS_SUPPORT is set explicitly) WITHOUT_WIRELESS_SUPPORT Build libraries, programs, and kernel modules without 802.11 wireless support. WITHOUT_WPA_SUPPLICANT_EAPOL Build wpa_supplicant(8) without support for the IEEE 802.1X protocol and without support for EAP-PEAP, EAP-TLS, EAP-LEAP, and EAP-TTLS protocols (usable only via 802.1X). WITHOUT_ZFS Do not build the ZFS file system kernel module, libraries such as libbe(3), and user commands such as zpool(8) or zfs(8). Also disable ZFS support in utilities and libraries which im- plement ZFS-specific functionality. WITHOUT_ZONEINFO Do not build the timezone database. When set, it enforces these options: WITHOUT_ZONEINFO_LEAPSECONDS_SUPPORT WITH_ZONEINFO_LEAPSECONDS_SUPPORT Build leapsecond information in to the timezone database. FILES /etc/src.conf /etc/src-env.conf /usr/share/mk/bsd.own.mk SEE ALSO make(1), make.conf(5), build(7), ports(7) HISTORY The src.conf file appeared in FreeBSD 7.0. AUTHORS This manual page was autogenerated by tools/build/options/makeman. FreeBSD 13.2 September 4, 2023 SRC.CONF(5)
NAME | DESCRIPTION | FILES | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=src.conf&manpath=FreeBSD+14.0-RELEASE+and+Ports>