Apropos tw - FreeBSD 15.1-RELEASE and Ports.quarterly Manual Pages

home | help

ALTQ(4): alternate queuing of network packets
ALTQ(9): kernel interfaces for manipulating output queues on network interfaces
OF_device_from_xref(9), OF_xref_from_device(9), OF_device_register_xref OF_device_unregister_xref(9): manage mappings between xrefs and devices
OF_node_from_xref(9), OF_xref_from_node(9): convert between kernel phandle and effective phandle
Q_QADDQ(3), Q_QDIVQ(3), Q_QMULQ(3), Q_QSUBQ(3), Q_NORMPREC(3), Q_QMAXQ(3), Q_QMINQ(3), Q_QCLONEQ(3), Q_CPYVALQ(3): fixed-point math functions which operate on two Q numbers
VNET(9): network subsystem virtualization infrastructure
VOP_COPY_FILE_RANGE(9): copy a byte range within a file or from one file to another in a single file system or between multiple file systems
a64l(3), l64a(3), l64a_r(3): convert between a long integer and a base-64 ASCII string
acl_cmp(3): compare between two ACLs
amdsmn(4): device driver for AMD processor System Management Network
ath(4): Atheros IEEE 802.11 wireless network driver
au_bsm_to_domain(3), au_domain_to_bsm(3): convert between BSM and local protocol domains
au_bsm_to_errno(3), au_errno_to_bsm(3), au_strerror(3): convert between BSM and local error numbers
au_bsm_to_fcntl_cmd(3), au_fcntl_cmd_to_bsm(3): convert between BSM and local fcntl(2) command values
au_bsm_to_socket_type(3), au_socket_type_to_bsm(3): convert between BSM and local socket types
au_preselect(3), getauditflagsbin(3), getauditflagschar(3): convert between string and numeric values of audit masks
bhnd(4): Broadcom Home Networking Division interconnect bus
bhnd_chipc(4): Broadcom Home Networking Division ChipCommon Driver
bhnd_pmu(4): Broadcom Home Networking Division PMU Driver
bhndb(4): Broadcom Home Networking Division interconnect bridge driver
bhndb_pci(4): Broadcom Home Networking Division PCI host bridge driver
bsdiff(1): generate a patch between two binary files
btowc(3), wctob(3): convert between wide and single-byte characters
bwi(4): Broadcom BCM43xx IEEE 802.11b/g wireless network driver
bwn(4): Broadcom BCM43xx SoftMAC IEEE 802.11 wireless network driver
cap_bind(3), cap_connect(3), cap_getaddrinfo(3), cap_gethostbyaddr(3), cap_gethostbyname(3), cap_gethostbyname2(3), cap_getnameinfo(3), cap_net_free(3), cap_net_limit(3), cap_net_limit_addr2name(3), cap_net_limit_addr2name_family(3), cap_net_limit_bind(3), cap_net_limit_connect(3), cap_net_limit_init(3), cap_net_limit_name2addr(3), cap_net_limit_name2addr_family(3): library for networking in capability mode
cap_getaddrinfo(3), cap_getnameinfo(3), cap_gethostbyname(3), cap_gethostbyname2(3), cap_gethostbyaddr(3), cap_dns_type_limit(3), cap_dns_family_limit(3): library for getting network host entry in capability mode
cap_getprotobyname(3): library for getting network proto entry in capability mode
capsicum(4), Capsicum(4): lightweight OS capability and sandbox framework
ckdist(1): check software distributions
cmp(1): compare two files
comm(1): select or reject lines common to two files
curs_getcchar(3), %getcchar(3), %setcchar(3): convert between a wide-character string and a curses complex character
curs_printw(3), %printw(3), %wprintw(3), %mvprintw(3), %mvwprintw(3), %vwprintw(3), %vw_printw(3): write formatted output to a curses window
curs_util(3), %delay_output(3), %filter(3), %flushinp(3), %getwin(3), %key_name(3), %keyname(3), %nofilter(3), %putwin(3), %unctrl(3), %use_env(3), %use_tioctl(3), %wunctrl(3): miscellaneous curses utility routines
dhclient-script(8): DHCP client network configuration script
disc(4): software discard network interface
diskless(8): booting a system over the network with PXE
drbr(9), drbr_free(9), drbr_enqueue(9), drbr_dequeue(9), drbr_dequeue_cond(9), drbr_flush(9), drbr_empty(9), drbr_inuse(9): network driver interface to buf_ring
edsc(4): Ethernet discard network interface
elf32_xlatetof(3), elf32_xlatetom(3), elf64_xlatetof(3), elf64_xlatetom(3), gelf_xlatetof(3), gelf_xlatetom(3): translate data between files and memory
ena(4): AWS EC2 Elastic Network Adapter (ENA) driver
fflagstostr(3), strtofflags(3): convert between file flag bits and their string names
fgetc(3), getc(3), getc_unlocked(3), getchar(3), getchar_unlocked(3), getw(3): get next character or word from input stream
fgetwc(3), getwc(3), getwchar(3): get next wide character from input stream
fgetwln(3): get a line of wide characters from a stream
fgetws(3): get a line of wide characters from a stream
form_field(3): make and break connections between fields and forms
fputc(3), fputc_unlocked(3), putc(3), putc_unlocked(3), putchar(3), putchar_unlocked(3), putw(3): output a character or word to a stream
fputwc(3), putwc(3), putwchar(3): output a wide character to a stream
fputws(3): output a line of wide characters to a stream
ftw(3), nftw(3): traverse (walk) a file tree
ftwd(4): Fintek F81803 watchdog timer
getcwd(3), getwd(3): get working directory pathname
gethostbyname(3), gethostbyname2(3), gethostbyaddr(3), gethostent(3), sethostent(3), endhostent(3), herror(3), hstrerror(3), gethostbyname_r(3), gethostbyname2_r(3), gethostbyaddr_r(3): get network host entry
getlocalbase(3): return the path to the local software directory
getnetconfig(3), setnetconfig(3), endnetconfig(3), getnetconfigent(3), freenetconfigent(3), nc_perror(3), nc_sperror(3): get network configuration database entry
getnetent(3), getnetbyaddr(3), getnetbyname(3), setnetent(3), endnetent(3): get network entry
ggatec(8): GEOM Gate network client and control utility
ggated(8): GEOM Gate network daemon
graid(8): control utility for software RAID devices
gre(4): encapsulating network device
hostapd(8): authenticator for IEEE 802.11 networks
htonl(3), htons(3), ntohl(3), ntohs(3): convert values between host and network byte order
hv_netvsc(4): Hyper-V Network Virtual Service Consumer
ieee80211(9), IEEE80211(9): 802.11 network layer
ieee80211_amrr(9): 802.11 network driver transmit rate control support
ieee80211_input(9): software 802.11 stack input functions
ieee80211_node(9): software 802.11 stack node management functions
ieee80211_output(9): software 802.11 stack output functions
ieee80211_vap(9), net80211_vap(9): 802.11 network layer virtual radio support
if_bridge(4): network bridge device
if_nametoindex(3), if_indextoname(3), if_nameindex(3), if_freenameindex(3): provide mappings between interface names and indexes
if_t(9), ifnet(9), ifaddr(9), ifqueue(9), if_data(9): kernel interfaces for manipulating network interfaces
ifconfig(8): configure network interface parameters
iflib(4): Network Interface Driver Framework
iflib(9): Network Interface Driver Framework
ifmib(4): Management Information Base for network interfaces
inet_aton(3), inet_addr(3), inet_network(3), inet_ntoa(3), inet_ntoa_r(3), inet_ntop(3), inet_pton(3), inet_makeaddr(3), inet_lnaof(3), inet_netof(3): Internet address manipulation routines
inet_net_ntop(3), inet_net_pton(3): Internet network number manipulation routines
ip6(4): Internet Protocol version 6 (IPv6) network layer
ipnat(4): Network Address Translation kernel interface
isgreater(3), isgreaterequal(3), isless(3), islessequal(3), islessgreater(3), isunordered(3): compare two floating-point numbers
iswalnum_l(3), iswalpha_l(3), iswcntrl_l(3), iswctype_l(3), iswdigit_l(3), iswgraph_l(3), iswlower_l(3), iswprint_l(3), iswpunct_l(3), iswspace_l(3), iswupper_l(3), iswxdigit_l(3), towlower_l(3), towupper_l(3), wctype_l(3), iswblank_l(3), iswhexnumber_l(3), iswideogram_l(3), iswnumber_l(3), iswphonogram_l(3), iswrune_l(3), iswspecial_l(3), nextwctype_l(3), towctrans_l(3), wctrans_l(3): wide character classification utilities
itwd(4): device driver for ITE Super I/O chips watchdog timer
iwi(4): Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 network driver
iwlwifi(4): Intel IEEE 802.11a/b/g/n/ac/ax/be wireless network driver
iwlwififw(4): Firmware for Intel iwlwifi wireless network driver
iwm(4): Intel IEEE 802.11ac wireless network driver
iwn(4): Intel IEEE 802.11n wireless network driver
iwx(4): Intel WiFi 6 IEEE 802.11ax wireless network driver
kcmp(2): compare two kernel objects
kyua(1): Testing framework for infrastructure software
libalias(3): packet aliasing library for masquerading and network address translation
lo(4): software loopback network interface
mac_portacl(4): network port access control policy
mailwrapper(8): invoke appropriate MTA software based on configuration file
malo(4): Marvell Libertas IEEE 802.11b/g wireless network driver
me(4): encapsulating network device
miibus(4): IEEE 802.3 Media Independent Interface network bus
mlx4en(4): Mellanox ConnectX-3 10GbE/40GbE network adapter driver
mlx4ib(4): Mellanox ConnectX-3 10GbE/40GbE network adapter driver
mlx5ib(4): Mellanox ConnectX-4 and ConnectX-4 LX based 100Gb, 50Gb, 40Gb, 25Gb and 10Gb network adapter driver
mlx5io(4): IOCTL interface to manage Connect-X 4/5/6 Mellanox network adapters
mlx5tool(8): Utility for managing Connect-X 4/5/6 Mellanox network adapters
mtw(4): MediaTek MT7601U USB IEEE 802.11n wireless network driver
mwl(4): Marvell 88W8363 IEEE 802.11n wireless network driver
natd(8): Network Address Translation daemon
netconfig(5): network configuration data base
netgdb(4): protocol for debugging the kernel with GDB over the network
netgraph(4): graph based kernel networking subsystem
netgroup(5): defines network groups
netid(5): YP network credential file
netisr(9): Kernel network dispatch service
netlink(4), Netlink(4): Kernel network configuration protocol
netstat(1): show network status and statistics
networking(4): introduction to networking facilities
networking(7), wifi(7): quickstart guide to connecting to a network
networks(5): network name data base
nextwctype(3): iterate through character classes
ng_ipfw(4): interface between netgraph and IP firewall
ntp.conf(5): Network Time Protocol (NTP) daemon configuration file format
ntp_adjtime(2), ntp_gettime(2): Network Time Protocol daemon (ntpd) interface system calls
oce(4): Device driver for Emulex OneConnect 10Gb network adapters
otus(4): Atheros AR9170 USB IEEE 802.11a/b/g/n wireless network driver
own(9), own_send_command(9), own_command_wait(9), own_self_command(9), own_acquire_bus(9), own crc(9), own_release_bus(9), OWN_ACQUIRE_BUS(9), OWN_CRC(9), OWN_RELEASE_BUS(9), OWN_SEND_COMMAND(9): Dallas Semiconductor 1-Wire Network and Transport Interface
pcap_lookupnet(3): find the IPv4 network number and netmask for a device
ping(8): send ICMP or ICMPv6 ECHO_REQUEST packets to network hosts
pmc.cmn-600(3): Library for accessing the Arm CoreLink CMN-600 Coherent Mesh Network Controller performance counter events
pmc.soft(3): measurements using software based events
pthread_multi_np(3), pthread_single_np(3): switch between multi- and single-threaded scheduling modes
ral(4): Ralink Technology IEEE 802.11a/g/n wireless network driver
routed(8), rdisc(8): network RIP and router discovery routing daemon
rsu(4): Realtek RTL8188SU/RTL8192SU USB IEEE 802.11b/g/n wireless network driver
rtnetlink(4), RTNetlink(4): Network configuration-specific Netlink family
rtw88(4): Realtek IEEE 802.11n/ac wireless network driver
rtw89(4): Realtek IEEE 802.11ax wireless network driver
rtwn(4): Realtek IEEE 802.11n/ac wireless network driver
rtwn_pci(4): Realtek wireless rtwn network driver PCI/PCIe support
rtwn_usb(4): Realtek wireless rtwn network driver USB support
rtwnfw(4): Firmware Module for Realtek Wireless driver
rum(4): Ralink Technology USB IEEE 802.11a/b/g wireless network driver
run(4): Ralink Technology USB IEEE 802.11a/g/n wireless network driver
rusers(1): who is logged in to machines on local network
set_menu_items(3), menu_items(3), item_count(3): make and break connections between items and menus
set_menu_spacing(3), menu_spacing(3): set and get spacing between menu items
setfib(1): execute a utility with an altered default network view
sigaction(2): software signal facilities
signal(3): simplified software signal facilities
sigvec(2): software signal facilities
snmp_wlan(3): wireless networking module for bsnmpd(1)
sntp(8): standard Simple Network Time Protocol client program
swi_add(9), swi_remove(9), swi_sched(9): register and schedule software interrupt handlers
sysdecode_abi_to_freebsd_errno(3), sysdecode_freebsd_to_abi_errno(3): translate error numbers between process ABIs
tap(4), vmnet(4): Ethernet tunnel software network interface
tcgetwinsize(3), tcsetwinsize(3): get, set the size of a terminal window
tcpdump(1): dump traffic on a network
ti(4): Alteon Networks Tigon I and Tigon II Gigabit Ethernet driver
traceroute(8): print the route packets take to network host
traceroute6(8): print the route IPv6 packets will take to a network node
tsearch(3), tfind(3), tdelete(3), twalk(3): manipulate binary search trees
tun(4): tunnel software network interface
tws(4): 3ware 9750 SATA+SAS 6Gb/s RAID controller card driver
uath(4): Atheros USB IEEE 802.11a/b/g wireless network driver
udplite(4): Lightweight User Datagram Protocol
ungetwc(3): un-get wide character from input stream
upgt(4): Conexant/Intersil PrismGT SoftMAC USB IEEE 802.11b/g wireless network driver
ural(4): Ralink RT2500USB IEEE 802.11a/b/g wireless network driver
urtw(4): Realtek RTL8187B/L USB IEEE 802.11b/g wireless network driver
valectl(8): manage VALE network switches provided by netmap
vge(4): VIA Networking Technologies Velocity Gigabit Ethernet adapter driver
vlan(4): IEEE 802.1Q VLAN network interface
wake(8): send Wake on LAN frames to hosts on a local Ethernet network
watchdog(4): hardware and software watchdog
watchdog(9): software and hardware watchdog facility
wdatwd(4): device driver for the ACPI WDAT based watchdog interrupt timer
whois(1): Internet domain name and network number directory service
wlanstat(8): query 802.11 wireless network statistics
wpa_supplicant(8): WPA/802.11i Supplicant for wireless network devices
wpi(4): Intel PRO/Wireless 3945ABG IEEE 802.11a/b/g network driver
zfs-diff(8): show difference between ZFS snapshots
zyd(4): ZyDAS ZD1211/ZD1211B USB IEEE 802.11b/g wireless network driver
BIO_s_datagram(3), BIO_new_dgram(3), BIO_ctrl_dgram_connect(3), BIO_ctrl_set_connected(3), BIO_dgram_recv_timedout(3), BIO_dgram_send_timedout(3), BIO_dgram_get_peer(3), BIO_dgram_set_peer(3), BIO_dgram_detect_peer_addr(3), BIO_dgram_get_mtu_overhead(3): Network BIO with datagram semantics
OPENSSL_Applink(3): glue between OpenSSL BIO and Win32 compiler run-time
OPENSSL_strcasecmp(3), OPENSSL_strncasecmp(3): compare two strings ignoring case
SSL_get_rpoll_descriptor(3), SSL_get_wpoll_descriptor(3), SSL_net_read_desired(3), SSL_net_write_desired(3): obtain information which can be used to determine when network I/O can be performed
SSL_handle_events(3): advance asynchronous state machine and perform network I/O
SSL_inject_net_dgram(3): inject a datagram as though received from the network
"glEvalCoord1d(3), glEvalCoord1f(3), glEvalCoord2d(3), glEvalCoord2f(3), glEvalCoord1dv(3), glEvalCoord1fv(3), glEvalCoord2dv(3), glEvalCoord2fv(3): evaluate enabled one- and two-dimensional maps delim $$
"glEvalMesh1(3), glEvalMesh2(3): compute a one- or two-dimensional grid of points or lines
"glMap2d(3), glMap2f(3): define a two-dimensional evaluator
"glMapGrid1d(3), glMapGrid1f(3), glMapGrid2d(3), glMapGrid2f(3): define a one- or two-dimensional mesh
AG_Net(3): agar network interface
AllPlanes(3), BlackPixel(3), WhitePixel(3), ConnectionNumber(3), DefaultColormap(3), DefaultDepth(3), XListDepths(3), DefaultGC(3), DefaultRootWindow(3), DefaultScreenOfDisplay(3), DefaultScreen(3), DefaultVisual(3), DisplayCells(3), DisplayPlanes(3), DisplayString(3), XMaxRequestSize(3), XExtendedMaxRequestSize(3), LastKnownRequestProcessed(3), NextRequest(3), ProtocolVersion(3), ProtocolRevision(3), QLength(3), RootWindow(3), ScreenCount(3), ScreenOfDisplay(3), ServerVendor(3), VendorRelease(3): Display macros and functions
BIO_s_datagram(3ossl), BIO_new_dgram(3ossl), BIO_ctrl_dgram_connect(3ossl), BIO_ctrl_set_connected(3ossl), BIO_dgram_recv_timedout(3ossl), BIO_dgram_send_timedout(3ossl), BIO_dgram_get_peer(3ossl), BIO_dgram_set_peer(3ossl), BIO_dgram_detect_peer_addr(3ossl), BIO_dgram_get_mtu_overhead(3ossl): Network BIO with datagram semantics
Bigarray.Array2(3o): Two-dimensional arrays
BlackPixelOfScreen(3), WhitePixelOfScreen(3), CellsOfScreen(3), DefaultColormapOfScreen(3), DefaultDepthOfScreen(3), DefaultGCOfScreen(3), DefaultVisualOfScreen(3), DoesBackingStore(3), DoesSaveUnders(3), DisplayOfScreen(3), XScreenNumberOfScreen(3), EventMaskOfScreen(3), HeightOfScreen(3), HeightMMOfScreen(3), MaxCmapsOfScreen(3), MinCmapsOfScreen(3), PlanesOfScreen(3), RootWindowOfScreen(3), WidthOfScreen(3), WidthMMOfScreen(3): screen information functions and macros
CDKchdir(3), CDKchdir CDKgetDirectoryContents CDKopenFile CDKreadFile alignxy char2Chtype char2DisplayType checkForLink chtype2String deleteCursesWindow enableCursesMarkup eraseCursesWindow getListIndex getString justifyString mode2Filetype moveCursesWindow popupDialog popupLabel popupLabelAttrib selectFile setWidgetDimension stripWhiteSpace viewFile viewInfo cdk_util(3): Cdk utility functions
COMMIT_PREPARED(7): commit a transaction that was earlier prepared for two-phase commit
COPY(7): copy data between a file and a table
CURLMOPT_NETWORK_CHANGED(3): signal network changed
CURLOPT_CONV_FROM_NETWORK_FUNCTION(3): convert data from network to host encoding
CURLOPT_CONV_TO_NETWORK_FUNCTION(3): convert data to network from host encoding
Condition(3o): Condition variables to synchronize between threads
Diffing_with_keys(3o): When diffing lists where each element has a distinct key, we can refine the diffing patch by introducing two composite edit moves: swaps and moves
DisplayOfCCC(3), VisualOfCCC(3), ScreenNumberOfCCC(3), ScreenWhitePointOfCCC(3), ClientWhitePointOfCCC(3): Color Conversion Context macros
EVP_PKCS82PKEY(3), EVP_PKEY2PKCS8(3): convert between EVP_PKEY and PKCS#8 PrivateKeyInfo
Ephemeron.K2(3o): Ephemerons with two keys
FcCharSetEqual(3): Compare two charsets
FcMatrixEqual(3): Compare two matrices
FcPatternGetWithBinding(3): Return a value with binding from a pattern
FcStrPlus(3): concatenate two strings
FcValueEqual(3): Test two values for equality
FeelWindowBox(1x): defines placement policy for certain type of windows, based on desk, window attributes, window size, etc. Useful for xinerama configurations, where windows should not be placed in between screens
GENLIB_LOSIGMERGE(3): merge two logical signals
GENLIB_WIRE2(3): place two physical segments in the current figure
HPL_ladd(3): Adds two long positive integers
HPL_max(3): Combine (max) two buffers
HPL_min(3): Combine (min) two buffers
HPL_sum(3): Combine (sum) two buffers
IV_FD_PUMP_INIT(3), iv_fd_pump_init(3), iv_fd_pump_destroy(3), iv_fd_pump_pump(3), iv_fd_pump_is_done(3): pump data between file descriptors
ImageMagick(1): a free software suite for the creation, modification and display of bitmap images
MPI_Aint_diff(3): Returns the difference between addr1 and addr2
MPI_Comm_compare(3): Compares two communicators
MPI_Comm_join(3): Create a communicator by joining two processes connected by a socket
MPI_Group_compare(3): Compares two groups
MPI_Group_difference(3): Makes a group from the difference of two groups
MPI_Group_intersection(3): Produces a group as the intersection of two existing groups
MPI_Group_union(3): Produces a group by combining two groups
MPI_Intercomm_create(3): Creates an intercommuncator from two intracommunicators
MPI_Open_port(3): Establish an address that can be used to establish connections between groups of MPI processes
Mapper(1): orienteering map drawing software
MeasureChar.tk86(3), Tk_MeasureChars(3), Tk_TextWidth(3), Tk_DrawChars(3), Tk_UnderlineChars(3): routines to measure and display simple single-line strings
ModuleFrn.conf(5): Configuration file for the SvxLink server Free Radio Network (FRN) module
Munin::Node::Session(3): Stores the state for the session between a node and a master
OPENSSL_Applink(3ossl): glue between OpenSSL BIO and Win32 compiler run-time
OPENSSL_strcasecmp(3ossl), OPENSSL_strncasecmp(3ossl): compare two strings ignoring case
PREPARE_TRANSACTION(7): prepare the current transaction for two-phase commit
PTAInterpolate(1): Interpolate intermediate images between stereo photos
PTtiffdump(1): Compare two TIFF images
ROLLBACK_PREPARED(7): cancel a transaction that was earlier prepared for two-phase commit
SMIME_crlf_copy(3): buffered copy between BIOs
SP_disconnect(3): destroy connection between app and daemon
SP_join(3): create connection between app and daemon
SP_leave(3): create connection between app and daemon
SSL_copy_session_id(3): copy session details between SSL objects
SSL_get_rpoll_descriptor(3ossl), SSL_get_wpoll_descriptor(3ossl), SSL_net_read_desired(3ossl), SSL_net_write_desired(3ossl): obtain information which can be used to determine when network I/O can be performed
SSL_handle_events(3ossl): advance asynchronous state machine and perform network I/O
SSL_inject_net_dgram(3ossl): inject a datagram as though received from the network
SoapySDRServer(1): provide access to local SoapySDR devices over network
Sympa::DataSource::LDAP2(3Sympa): Data source based on LDAP with two-level search operations
Tcl_GetBignumFromObj.tcl86(3), Tcl_NewIntObj(3), Tcl_NewLongObj(3), Tcl_NewWideIntObj(3), Tcl_SetIntObj(3), Tcl_SetLongObj(3), Tcl_SetWideIntObj(3), Tcl_GetIntFromObj(3), Tcl_GetLongFromObj(3), Tcl_GetWideIntFromObj(3), Tcl_NewBignumObj(3), Tcl_SetBignumObj(3), Tcl_GetBignumFromObj(3), Tcl_TakeBignumFromObj(3): manipulate Tcl values as integers
Tcl_GetBignumFromObj.tcl90(3), Tcl_NewIntObj(3), Tcl_NewLongObj(3), Tcl_NewWideIntObj(3), Tcl_NewWideUIntObj(3), Tcl_SetIntObj(3), Tcl_SetLongObj(3), Tcl_SetWideIntObj(3), Tcl_SetWideUIntObj(3), Tcl_GetIntFromObj(3), Tcl_GetIntForIndex(3), Tcl_GetLongFromObj(3), Tcl_GetSizeIntFromObj(3), Tcl_GetWideIntFromObj(3), Tcl_GetWideUIntFromObj(3), Tcl_NewBignumObj(3), Tcl_SetBignumObj(3), Tcl_GetBignumFromObj(3), Tcl_TakeBignumFromObj(3): manipulate Tcl values as integers
Thread(3o): Lightweight threads for Posix 1003.1c and Win32
Tk_AttachHWND.tk86(3), Tk_GetHWND(3), Tk_AttachHWND(3): manage interactions between the Windows handle and an X window
Tk_ChangeWindowAttributes.tk86(3), Tk_ConfigureWindow(3), Tk_MoveWindow(3), Tk_ResizeWindow(3), Tk_MoveResizeWindow(3), Tk_SetWindowBorderWidth(3), Tk_ChangeWindowAttributes(3), Tk_SetWindowBackground(3), Tk_SetWindowBackgroundPixmap(3), Tk_SetWindowBorder(3), Tk_SetWindowBorderPixmap(3), Tk_SetWindowColormap(3), Tk_DefineCursor(3), Tk_UndefineCursor(3): change window configuration or attributes
Tk_GetAnchor.tk86(3), Tk_GetAnchorFromObj(3), Tk_GetAnchor(3), Tk_NameOfAnchor(3): translate between strings and anchor positions
Tk_GetCapStyle.tk86(3), Tk_GetCapStyle(3), Tk_NameOfCapStyle(3): translate between strings and cap styles
Tk_GetJoinStyle.tk86(3), Tk_GetJoinStyle(3), Tk_NameOfJoinStyle(3): translate between strings and join styles
Tk_GetJustify.tk86(3), Tk_GetJustifyFromObj(3), Tk_GetJustify(3), Tk_NameOfJustify(3): translate between strings and justification styles
Tk_GetMMFromObj.tk86(3), Tk_GetPixelsFromObj(3), Tk_GetPixels(3), Tk_GetMMFromObj(3), Tk_GetScreenMM(3): translate between strings and screen units
Tk_GetRelief.tk86(3), Tk_GetReliefFromObj(3), Tk_GetRelief(3), Tk_NameOfRelief(3): translate between strings and relief values
Tk_Name.tk86(3), Tk_Name(3), Tk_PathName(3), Tk_NameToWindow(3): convert between names and window tokens
Tk_SetWindowVisual.tk86(3), Tk_SetWindowVisual(3): change visual characteristics of window
X(7): a portable, network-transparent window system
XAllocSizeHints(3), XSetWMNormalHints(3), XGetWMNormalHints(3), XSetWMSizeHints(3), XGetWMSizeHints(3), XSizeHints(3): allocate size hints structure and set or read a window's WM_NORMAL_HINTS property
XAllocWMHints(3), XSetWMHints(3), XGetWMHints(3), XWMHints(3): allocate window manager hints structure and set or read a window's WM_HINTS property
XChangeWindowAttributes(3), XSetWindowBackground(3), XSetWindowBackgroundPixmap(3), XSetWindowBorder(3), XSetWindowBorderPixmap(3), XSetWindowColormap(3): change window attributes
XConfigureWindow(3), XMoveWindow(3), XResizeWindow(3), XMoveResizeWindow(3), XSetWindowBorderWidth(3), XWindowChanges(3): configure windows and window changes structure
XCreateWindow(3), XCreateSimpleWindow(3), XSetWindowAttributes(3): create windows and window attributes structure
XGetWindowAttributes(3), XGetGeometry(3), XWindowAttributes(3): get current window attribute or geometry and current window attributes structure
XGetWindowProperty(3), XListProperties(3), XChangeProperty(3), XRotateWindowProperties(3), XDeleteProperty(3): obtain and change window properties
XIntersectRegion(3), XUnionRegion(3), XUnionRectWithRegion(3), XSubtractRegion(3), XXorRegion(3), XOffsetRegion(3), XShrinkRegion(3): region arithmetic
XReparentWindow(3): reparent windows
XSetWMClientMachine(3), XGetWMClientMachine(3): set or read a window's WM_CLIENT_MACHINE property
XSetWMColormapWindows(3), XGetWMColormapWindows(3): set or read a window's WM_COLORMAP_WINDOWS property
XSetWMIconName(3), XGetWMIconName(3), XSetIconName(3), XGetIconName(3): set or read a window's WM_ICON_NAME property
XSetWMName(3), XGetWMName(3), XStoreName(3), XFetchName(3): set or read a window's WM_NAME property
XSetWMProperties(3), XmbSetWMProperties(3), Xutf8SetWMProperties(3): set standard window properties
XSetWMProtocols(3), XGetWMProtocols(3): set or read a window's WM_PROTOCOLS property
XTextWidth(3), XTextWidth16(3): compute text width
XcmsSetWhitePoint(3), XcmsSetWhiteAdjustProc(3): modifying CCC attributes
XkbKeyActionEntry(3): Returns a pointer to the key action corresponding to group grp and shift level lvl from the two-dimensional table of key actions associated with the key corresponding to keycode
XkbKeyActionsPtr(3): Returns a pointer to the two-dimensional array of key actions associated with the key corresponding to keycode
XkbKeySymEntry(3): Returns the keysym corresponding to shift level shift and group grp from the two-dimensional array of keysyms for the key corresponding to keycode
XkbKeySymsPtr(3): Returns the pointer to the two-dimensional array of keysyms for the key corresponding to keycode
XmSetWMProtocolHooks(3): A VendorShell convenience interface that allows preactions and postactions to be executed when a protocol message is received from the window manager "XmSetWMProtocolHooks" "VendorShell functions" "XmSetWMProtocolHooks" "protocols"
XmStringBaseline(3): A compound string function that returns the number of pixels between the top of the character box and the baseline of the first line of text "XmStringBaseline" "compound string functions" "XmStringBaseline"
XmStringCompare(3): A compound string function that compares two strings "XmStringCompare" "compound string functions" "XmStringCompare"
XmTargetsAreCompatible(3): A function that tests whether the target types match between a drop site and source object "XmTargetsAreCompatible" "Drag and Drop functions" "XmTargetsAreCompatible"
XmTextFieldInsertWcs(3): A TextField function that inserts a wide character string into a TextField widget "XmTextFieldInsertWcs" "TextField functions" "XmTextFieldInsertWcs"
XmTextInsertWcs(3): A Text function that inserts a wide character string into a Text widget "XmTextInsertWcs" "Text functions" "XmTextInsertWcs"
XmbufQueryExtension(3), XmbufGetVersion(3), XmbufCreateBuffers(3), XmbufDestroyBuffers(3), XmbufDisplayBuffers(3), XmbufGetWindowAttributes(3), XmbufChangeWindowAttributes(3), XmbufGetBufferAttributes(3), XmbufChangeBufferAttributes(3), XmbufGetScreenInfo(3), XmbufCreateStereoWindow(3): X multibuffering functions
XmtAssertWidgetClass(3), XmtAssertWidgetClass()(3): verify the type of a widget
XmtCheckPrintfFormat(3), XmtCheckPrintfFormat()(3): verify that two strings have the same printf() substitutions
XmtDialogGetDialogValues(3), XmtDialogGetDialogValues()(3), XmtDialogSetDialogValues()(3): transfer values between the fields of a data structure and the widgets of a dialog box
XmtErrorMsg(3), XmtErrorMsg()(3), XmtWarningMsg()(3): print an error message and exit or print a warning message and return
XmtFocusShell(3), XmtFocusShell()(3), XmtMoveShellToPointer()(3), XmtWarpToShell()(3), XmtSetFocusToShell()(3): change keyboard focus to a shell widget
XmtHSLToRGB(3), XmtHSLToRGB()(3), XmtRGBToHSL()(3): convert between the HSL and RGB color spaces
XmtLayoutSpace(3): an XmtLayout gadget that places space between other items in the layout
XmtMenuGetMenuItem(3), XmtMenuGetMenuItem()(3), XmtMenuItemGetSubmenu()(3), XmtMenuItemGetWidget()(3), XmtMenuItemSetSensitivity()(3), XmtMenuItemGetState()(3), XmtMenuItemSetState()(3): look up items in an XmtMenu widget by name, and manipulate them
XmtRegisterMotifWidgets(3), XmtRegisterMotifWidgets()(3), XmtRegisterXmtWidgets()(3): register the standard Motif and Xmt widget constructors for use with the automatic widget creation facilities
XmtWaitUntilMapped(3), XmtWaitUntilMapped()(3): process events until a dialog becomes mapped
XmtWorkingBox(3): a widget for ``please wait'' dialogs
XmtWorkingBoxHandleEvents(3), XmtWorkingBoxHandleEvents()(3), XmtWorkingBoxSetScaleValue()(3): check the push button and update the slider value in an XmtWorkingBox widget
XtAppError(3), XtAppSetErrorHandler(3), XtAppSetWarningHandler(3), XtAppWarning(3): low-level error handlers
XtAppErrorMsg(3), XtAppSetErrorMsgHandler(3), XtAppSetWarningMsgHandler(3), XtAppWarningMsg(3): high-level error handlers
XtCreateApplicationContext(3), XtDestroyApplicationContext(3), XtWidgetToApplicationContext(3), XtToolkitInitialize(3): create, destroy, and obtain an application context
XtDisplay(3), XtDisplayOfObject(3), XtScreen(3), XtScreenOfObject(3), XtWindow(3), XtWindowOfObject(3): obtain window information about a widget
XtError(3), XtSetErrorHandler(3), XtSetWarningHandler(3), XtWarning(3): low-level error handlers
XtErrorMsg(3), XtSetErrorMsgHandler(3), XtWarningMsg(3), XtSetWarningMsgHandler(3): high-level error handlers
XtNameToWidget(3), XtWindowToWidget(3): translating strings to widgets or widgets to windows
XtSetWMColormapWindows(3): Set the value of the WM_COLORMAP_WINDOWS property
af(1): Amberfish text retrieval software
affconvert(1): convert files between RAW and AFF formats
afpcmd(1): Transfer files over the networking using the Apple Filing Protocol (AFP)
aireplay-ng(8): inject packets into a wireless network to generate traffic
align(1): compute the global alignment of two protein or DNA sequences align0 - compute the global alignment of two protein or DNA sequences without penalizing for end-gaps
amanda-auth(7): Communication/Authentication methods between Amanda server and client
amanda-auth-ssl(7): SSL Communication/Authentication methods between Amanda server and client
amanda-client.conf(5): Client configuration file for Amanda, the Advanced Maryland Automatic Network Disk Archiver
amanda-compatibility(7): Compatibility between Amanda versions
amanda.conf(5): Main configuration file for Amanda, the Advanced Maryland Automatic Network Disk Archiver
amsynth(1): a two oscillator subtractive software synthesizer
ansilove_artworx(3): Process and render Artworx content
appjail-network(1): Create, remove or manage virtual networks for jails
applyBinBdd(3): applies an operator to two BDD
applybddnode(3): applies an operator on two bdd nodes. man1/alc_origin.1
applybddnodeterm(3): applies an operator on two bdd nodes. man1/alc_origin.1
appscript(1): Simple, lightweight and effective tool for creating SFX files
apriboot(1): rewrite disc boot sector, converting between Apricot and PCDOS
aprsc(8): An APRS-IS network server
ares_inet_ntop(3): convert a network format address to presentation format
ares_set_local_dev(3): Bind to a specific network device when creating sockets
aseqnet(1): ALSA sequencer connectors over network
asn2asn(1): convert NCBI data between text and binary ASN.1
astroid(1): graphical threads-with-tags style, lightweight and fast, e-mail client for Notmuch
astwarp(1), Warp(1): warp (transform) input dataset
au_domain(3), au_bsm_to_domain(3), au_domain_to_bsm(3): convert between BSM and local protocol domains
au_errno(3), au_bsm_to_errno(3), au_errno_to_bsm(3), au_strerror(3): convert between BSM and local error numbers
au_fcntl_cmd(3), au_bsm_to_fcntl_cmd(3), au_fcntl_cmd_to_bsm(3): convert between BSM and local fcntl(2) command values
au_mask(3), au_preselect(3), getauditflagsbin(3), getauditflagschar(3): convert between string and numeric values of audit masks
au_socket_type(3), au_bsm_to_socket_type(3), au_socket_type_to_bsm(3): convert between BSM and local socket types
audemo(1): Network Audio System record and play demo audemo#(1) "" "audemo(1)"
auinfo(1): show information about a Network Audio System server
aupanel(1): allows user adjustment of Network Audio System device attributes aupanel#(1) "" "aupanel(1)"
auplay(1): play a sound file to a Network Audio System server
aurecord(1): record a sound file from a Network Audio System server
auscope(1): Network Audio System Protocol Filter auscope#(1) "" "auscope(1)"
auth2elem(3): element in an hash table with two keys
auto_execok.tcl86(n), auto_execok(n), auto_import(n), auto_load(n), auto_mkindex(n), auto_qualify(n), auto_reset(n), parray(n), tcl_findLibrary(n), tcl_endOfWord(n), tcl_nonwordchars(n), tcl_startOfNextWord(n), tcl_startOfPreviousWord(n), tcl_wordBreakAfter(n), tcl_wordBreakBefore(n), tcl_wordchars(n): standard library of Tcl procedures
auto_execok.tcl90(n), auto_execok(n), auto_import(n), auto_load(n), auto_mkindex(n), auto_qualify(n), auto_reset(n), foreachLine(n), parray(n), readFile(n), tcl_findLibrary(n), tcl_endOfWord(n), tcl_nonwordchars(n), tcl_startOfNextWord(n), tcl_startOfPreviousWord(n), tcl_wordBreakAfter(n), tcl_wordBreakBefore(n), tcl_wordchars(n), writeFile(n): Standard library of Tcl procedures
avahi-autoipd(8): IPv4LL network address configuration daemon
babeld(8): ad-hoc network routing daemon
backend-spec(7): interface between jw and its backends
bacula(8), Bacula(8): The Network Backup Solution
bastille-network(8), bastille network(8): Add or remove interface(s) from jail(s)
bastille-setup(8), bastille setup(8): Auto-configure network, firewall, storage and more
bgpd(8): a BGPv4, BGPv4+, BGPv4- routing engine for use with Quagga routing software
binkd(8): transfer files between two Fidonet systems over TCP/IP
bitlbee(8), BitlBee(8): IRC gateway to IM chat networks
bitmap(n): Images that display two colors
bittwist(1): -- pcap based ethernet packet generator
bittwiste(1): -- pcap capture file editor
bitwise(1): Terminal based bit manipulator in ncurses
bl_bed_check_order(3), bl_bed_check_order()(3): Compare positions of two bed records
bl_fastq_name_cmp(3), bl_fastq_name_cmp()(3): Compare read names of two FASTQ objects
bl_overlap_print(3), bl_overlap_print()(3): Print overlap summary for two features
bl_overlap_set_all(3), bl_overlap_set_all()(3): Set overlap fields for two features
blind-compress(1): Compress a video for network transmission
blitz(1): Securely transfer files between two workstations through NAT/Firewall
blkcalc(1): Converts between unallocated disk unit numbers and regular disk unit numbers
bond_target(3), bond_target (3): Setup a state transfer pipe between two targets
borg-diff(1): Diff contents of two archives
btop(1): Resource monitor that shows usage and stats for processor, memory, disks, network, and processes
bwm-ng(1): Bandwidth Monitor NG (Next Generation), a live bandwidth monitor for network and disk io
bwping(8): and bwping6 are tools to measure bandwidth and response times between two hosts using Internet Control Message Protocol (ICMP) echo request/echo reply mechanism
caja-autorun-software(1): Autorun Software in Caja
callpass(1): generate Pass-code associated with your callsign for authentication via xastir to APRS(tm) network
cargo-fetch(1): [em] Fetch dependencies of a package from the network
cdfdiff(1): compares two classic netCDF files in parallel
cert2spc(1): Transform multiple X.509 certificates to a Software Publisher Certificate
certwatch(1): Watch X509 certificates expiration dates
cg_diff(1): (deprecated) diffs two Cachegrind output files
chilli(8): A Software Access Controller for Captive Portal and WPA
cif-diff(1): A tool to compare two mmCIF files
ck_bitmap_union(3): generates union of two bitmaps
ck_pr_and(3), ck_pr_and_ptr(3), ck_pr_and_char(3), ck_pr_and_uint(3), ck_pr_and_int(3), ck_pr_and_64(3), ck_pr_and_32(3), ck_pr_and_16(3), ck_pr_and_8(3): atomic bitwise-and operations
ck_pr_or(3), ck_pr_or_ptr(3), ck_pr_or_char(3), ck_pr_or_uint(3), ck_pr_or_int(3), ck_pr_or_64(3), ck_pr_or_32(3), ck_pr_or_16(3), ck_pr_or_8(3): atomic bitwise-or operations
ck_pr_xor(3), ck_pr_xor_ptr(3), ck_pr_xor_char(3), ck_pr_xor_uint(3), ck_pr_xor_int(3), ck_pr_xor_64(3), ck_pr_xor_32(3), ck_pr_xor_16(3), ck_pr_xor_8(3): atomic bitwise-xor operations
clawsker(1), Clawsker(1): A Claws Mail Tweaker
clipit(1), ClipIt(1): Lightweight GTK+ Clipboard Manager
codechanges(1): computes the amount of code changes between two code trees or single files
combine(1): combine sets of lines from two files using boolean operations
combinediff(1): create a cumulative unified patch from two incremental patches
compare(1): fast binary comparison of two files
compare(1): mathematically and visually annotate the difference between an image and its reconstruction
compare(1): two versions
concatname(3): concatenate two names with user separator man1/alc_origin.1
cons(1), Cons(1): A Software Construction System
convert(1): convert between image formats as well as resize an image, blur, crop, despeckle, dither, draw on, flip, join, re-sample, and much more
convertbddmuxabl(3): converts two bdd nodes to an abl multiplexor expression. man1/alc_origin.1
convickt(1): convert INTERCAL files between formats
courierpassd(8): change passwords from across the network using the Courier authentication library
crashme(1): test operating environment software robustness
create_bmp_for_stripline_coupler(1): bitmap generator for coupler with thin striplines between two infinitely wide groundplanes (part of atlc)
create_bmp_for_symmetrical_stripline(1): bitmap generator for thin conductor between two infinite groundplanes (part of atlc)
crtsv(1): mutual converter between TSV and QDBM Curia database
crush(1): A terminal-first AI assistant for software development
cstrc(l), cstrd(l): convert between ANSI C-strings and strings
ctwill(1), ctwill-proofsort(1), ctwill-refsort(1), ctwill-twinx(1): translate CWEB to TeX with mini-indexes
ctwm(1): Claudes Tab Window Manager for the X Window System
cual(6), Cual(6): Cuyo Animation Language Cual is the main language used to describe the animations in cuyo. Strictly speaking it's the stuff between the << >> brackets in the level description files (xxx.ld). On the other hand this man page aims at being a complete description of how to write levels for cuyo. But it's still under construction. See the file "example.ld" to get an idea of how the rest of the level description works. There's also a bit of example Cual code in "example.ld". And of course, all the existing levels are examples. Note that Cual is probably still very buggy. So if strange things happen and you're sure it's not your fault, tell me (cuyo@karimmi.de)
cubetwist(6): A series of nested cubes rotate and slide recursively
cueconvert(1): convert files between CUE and TOC formats
curl_easy_perform(3): perform a blocking network transfer
curl_strequal(3): compare two strings ignoring case
curl_strnequal(3): compare two strings ignoring case
curs_getcchar(3x), %getcchar(3x), %setcchar(3x): convert between a wide-character string and a curses complex character
curs_printw(3x), %printw(3x), %wprintw(3x), %mvprintw(3x), %mvwprintw(3x), %vwprintw(3x), %vw_printw(3x): write formatted output to a curses window
curs_util(3x), %delay_output(3x), %filter(3x), %flushinp(3x), %getwin(3x), %key_name(3x), %keyname(3x), %nofilter(3x), %putwin(3x), %unctrl(3x), %use_env(3x), %use_tioctl(3x), %wunctrl(3x): miscellaneous curses utility routines
cut-diff(1): show difference between 2 files with color
cutmp3(1): a fast and leightweight mp3 editor
cvechecker(1): Attempt to identify possible vulnerable software on the system
cverules(1): Generate version matching rules for installed software on a Linux / Unix distribution
cvsdelta(1): Manage and summarize the differences between a CVS project and local files
cvsup(1): network distribution package for CVS repositories
cvsupd(8): network distribution server for CVS repositories
cvtsudoers(1): convert between sudoers file formats
cwm(1): a lightweight and efficient window manager for X11
cwstudio(1): lightweight and portable CW signals generator with Curses UI
darkstat(8): network statistics gatherer
datacopy(1): move table data between two servers
dateconv(1): Convert DATE/TIMEs between calendrical systems
datezone(1): Convert DATE/TIMEs between timezones
dbclient(1): lightweight SSH client
dbmail-lmtpd(8): The LMTP daemon receive messages from an MTA supporting the Lightweight Mail Transport Protocol, as specified in RFC 2033
dcmpsrcv(1): Network receive for presentation state viewer
dcmpssnd(1): Network send for presentation state viewer
ddpt(8): copies data between files and storage devices. Support for devices that understand the SCSI command set
define_feedtarget(3), define_feedtarget (3): Create a direct copy association between two frameservers
dfa_determinize(1): Determinize NFA grammar network
dfa_minimize(1): Minimize a DFA grammar network
dhclient-script(8): DHCP client network configuration script
dhcp_probe(8): locate DCHP and BootP servers on a directly-attached network
dhcpcd-curses(8): a curses frontend for network configuration
dhcpcd-gtk(8): a GTK+ frontend for network configuration
diff(1): compare two files
diff(3m): compute a shortest edit script (SES) given two sequences
dirconvert(1): Convert color strings between LSCOLORS and LS_COLORS format
dirmngr(8): GnuPG's network access daemon
dirvish(8): Disk based virtual image network backup system
distance(3): compute the distance between two pieces of data
django-admin(1): Utility script for the Django web framework django-admin is Django(aqs command-line utility for administrative tasks. This document outlines all it can do. In addition, manage.py is automatically created in each Django project. It does the same thing as django-admin but also sets the DJANGO_SETTINGS_MODULE %<#:envvar-DJANGO_SETTINGS_MODULE> environment variable so that it points to your project(aqs settings.py file. The django-admin script should be on your system path if you installed Django via pip. If it(aqs not in your path, ensure you have your virtual environment activated. Generally, when working on a single Django project, it(aqs easier to use manage.py than django-admin. If you need to switch between multiple Django settings files, use django-admin with DJANGO_SETTINGS_MODULE %<#:envvar-DJANGO_SETTINGS_MODULE> or the --settings command line option. The command-line examples throughout this document use django-admin to be consistent, but any example can use manage.py or python -m django just as well
dnet(3): dumb networking library
dnet(8): dumb networking library test program
dnscap(1): DNS network traffic capture utility
dnsjit.core.object(3): Base object that is passed between receiver and receivee
dnsjit.filter.timing(3): Filter to pass objects to the next receiver based on timing between packets
dnsmasq(8): A lightweight DHCP and caching DNS server
dnstop(8): displays various tables of DNS traffic on your network
dot(1): filter for drawing directed graphs neato - filter for drawing undirected graphs twopi - filter for radial layouts of graphs circo - filter for circular layout of graphs fdp - filter for drawing undirected graphs sfdp - filter for drawing large undirected graphs patchwork - filter for squarified tree maps osage - filter for array-based layouts
doublecmd(1): Twin-panel (commander-style) file manager
doveadm-sync(1): Dovecot(aqs two-way mailbox synchronization utility doveadm-backup - Dovecot(aqs one-way mailbox synchronization utility
dptsv(1): mutual converter between TSV and QDBM Depot database
dragon-drop(1): lightweight DnD source/target
driftnet(1): capture images from network traffic and display them in an X window; optionally, capture audio streams and play them
dropbear(8): lightweight SSH server
dropbearconvert(1): convert between Dropbear and OpenSSH private key formats
dualcoax(1): determine impedance of a coaxial structure with two concentric dielectrics
dumpcap(1): Dump network traffic
dunst(1): a customizable and lightweight notification-daemon
echat(1), eChat(1): network conversations
echinus(1): a lightweight window manager for X11
epm(1): create software packages
eq(3), ecq(3): string equality test. countchar, countchar2, countstr count characters and strings within the string. replace, replace_detach, limittextwidth miscellaneous text functions
espeak-ng(1): A multi-lingual software speech synthesizer
estwaver(1): command line interface of web crawler
etherape(1): graphical network traffic browser
etruscanvenus(6): Draws a 3d immersion of a Klein bottle that smoothly deforms between the Etruscan Venus surface, the Roman surface, the Boy surface surface, and the Ida surface
etwdump(1): Provide an interface to read Event Tracing for Windows (ETW)
euler2d(6): two dimensional incompressible inviscid fluid flow
expect_kibitz(1), kibitz(1): allow two people to interact with one shell
explain_getaddrinfo_or_die(3): network address translation and report errors require_index { "explain_getaddrinfo_or_die(3)"
explain_getw(3): explain getw(3) errors require_index { }
explain_getw_or_die(3): input a word (int) and report errors require_index { "input a word (int) and report errors" }
explain_putw(3): explain putw(3) errors require_index { }
explain_putw_or_die(3): output a word (int) and report errors require_index { "output a word (int) and report errors" }
explain_strcoll_or_die(3): compare strings using current locale and report errors require_index { "compare two strings using the current locale and report errors" }
exquat(3): A comparison between Euler angles and quaternions. Allegro game programming library
exrmultiview(1): convert between single/multi-view exr images
fade_from(3): Gradually fades the palette between two others. Allegro game programming library
fade_from_range(3): Gradually fades a part of the palette between two others. Allegro game programming library
fade_interpolate(3): Calculates a new palette interpolated between two others. Allegro game programming library
far2l(1): Two-panel file manager, with built-in terminal and other usefulness'es
fasta(1): scan a protein or DNA sequence library for similar sequences tfasta - compare a protein sequence to a DNA sequence library, translating the DNA sequence library `on-the-fly'. lfasta - compare two protein or DNA sequences for local similarity and show the local sequence alignments plfasta - compare two sequences for local similarity and plot the local sequence alignments
fasta36(1): scan a protein or DNA sequence library for similar sequences fastx36 - compare a DNA sequence to a protein sequence database, comparing the translated DNA sequence in forward and reverse frames. tfastx36 - compare a protein sequence to a DNA sequence database, calculating similarities with frameshifts to the forward and reverse orientations. fasty36 - compare a DNA sequence to a protein sequence database, comparing the translated DNA sequence in forward and reverse frames. tfasty36 - compare a protein sequence to a DNA sequence database, calculating similarities with frameshifts to the forward and reverse orientations. fasts36 - compare unordered peptides to a protein sequence database fastm36 - compare ordered peptides (or short DNA sequences) to a protein (DNA) sequence database tfasts36 - compare unordered peptides to a translated DNA sequence database fastf36 - compare mixed peptides to a protein sequence database tfastf36 - compare mixed peptides to a translated DNA sequence database ssearch36 - compare a protein or DNA sequence to a sequence database using the Smith-Waterman algorithm. ggsearch36 - compare a protein or DNA sequence to a sequence database using a global alignment (Needleman-Wunsch) glsearch36 - compare a protein or DNA sequence to a sequence database with alignments that are global in the query and local in the database sequence (global-local). lalign36 - produce multiple non-overlapping alignments for protein and DNA sequences using the Huang and Miller sim algorithm for the Waterman-Eggert algorithm. prss36, prfx36 - discontinued; all the FASTA programs will estimate statistical significance using 500 shuffled sequence scores if two sequences are compared
faucet(1): a fixture for a BSD network pipe netpipes 4.2
fbpanel(1): a NETWM compliant lightweight GTK2-based panel for UNIX desktop
fcft_kerning(3): calculate kerning distance between two wide characters
fcft_precompose(3): pre-compose two wide characters into one
fcomp(1): file compare require_index { "fcomp(1)" "compare two files" }
fence_crosslink(8): Fence agent for cross-link two-node clusters
ffmpegthumbnailer(1): fast and lightweight video thumbnailer
fftw-wisdom(1): create wisdom (pre-optimized FFTs)
fftw-wisdom-to-conf(1): generate FFTW wisdom (pre-planned transforms)
fftwf-wisdom(1): create wisdom (pre-optimized FFTs)
fftwl-wisdom(1): create wisdom (pre-optimized FFTs)
fftwq-wisdom(1): create wisdom (pre-optimized FFTs)
fi_av_set(3): Address vector set operations fi_av_set / fi_close Open or close an address vector set fi_av_set_union Perform a set union operation on two AV sets fi_av_set_intersect Perform a set intersect operation on two AV sets fi_av_set_diff Perform a set difference operation on two AV sets fi_av_set_insert Add an address to an AV set fi_av_set_remove Remove an address from an AV set fi_av_set_addr Obtain a collective address for current addresses in an AV set
fi_endpoint(3): Fabric endpoint operations fi_endpoint / fi_scalable_ep / fi_passive_ep / fi_close Allocate or close an endpoint. fi_ep_bind Associate an endpoint with hardware resources, such as event queues, completion queues, counters, address vectors, or shared transmit/receive contexts. fi_scalable_ep_bind Associate a scalable endpoint with an address vector fi_pep_bind Associate a passive endpoint with an event queue fi_enable Transitions an active endpoint into an enabled state. fi_cancel Cancel a pending asynchronous data transfer fi_ep_alias Create an alias to the endpoint fi_control Control endpoint operation. fi_getopt / fi_setopt Get or set endpoint options. fi_rx_context / fi_tx_context / fi_srx_context / fi_stx_context Open a transmit or receive context. fi_tc_dscp_set / fi_tc_dscp_get Convert between a DSCP value and a network traffic class fi_rx_size_left / fi_tx_size_left (DEPRECATED) Query the lower bound on how many RX/TX operations may be posted without an operation returning -FI_EAGAIN. This functions have been deprecated and will be removed in a future version of the library
fi_fabric(3): Fabric network operations fi_fabric / fi_close Open / close a fabric network fi_tostr / fi_tostr_r Convert fabric attributes, flags, and capabilities to printable string
fi_nic(3): Fabric network interface card attributes
fi_provider(3), fi_prov_ini(3): External provider entry point fi_param_define / fi_param_get Register and retrieve environment variables with the libfabric core fi_log_enabled / fi_log_ready / fi_log Control and output debug logging information. fi_open / fi_close Open a named library object fi_export_fid / fi_import_fid Share a fabric object between different providers or resources
fieldlines(1): simulation of the electric field lines between charged particles
finance-quote-wrapper(1), finance-quote-wrapper (1): internal interface between gnucash and Finance::Quote
fixmul(3): Multiplies two fixed point values together. Allegro game programming library
flameshot(1), Flameshot(1): Powerful yet simple-to-use screenshot software
flipdiff(1): exchange the order of two incremental patches
flnews(1): Fast and lightweight Usenet client with GUI
flow-dscan(1): Detect scanning and other suspicious network activity
flowcap(8): Capture network flow data and write it to temporary files
fluxbox(1): A lightweight window manager for the X Windowing System
fmemcmp(3): fuzzy comparison of two memory areas require_index { }
fmemcmpi(3): fuzzy comparison of two memory areas require_index { }
form_field(3x): make and break connections between fields and forms
fping(8): send ICMP ECHO_REQUEST packets to network hosts
fragrouter(8): network intrusion detection evasion toolkit
frontend-spec(7): interface between jw and its frontends
fsf-funding(7): Funding Free Software
fstrcasecmp(3): fuzzy comparison of two strings ignoring case require_index { }
fstrcasecmpi(3): fuzzy comparison of two strings ignoring case require_index { }
fstrcmp(3): fuzzy comparison of two strings require_index { }
fstrcmpi(3): fuzzy comparison of two strings require_index { }
fstrcoll(3): fuzzy comparison of two strings using the current locale require_index { }
fstrcolli(3): fuzzy comparison of two strings using the current locale require_index { }
fswcmp(1): compairs two database files
ftwalk(3ast): file tree walker
ftwhich(1): fault tolerant search for a command name
ftwin(8): find duplicate files
fwcscmp(3): fuzzy comparison of two wide-character strings require_index { }
fwcscmpi(3): fuzzy comparison of two wide-character strings require_index { }
gcmp(1), cmp(1): compare two files byte by byte
gcomm(1), comm(1): compare two sorted files line by line
gdal-raster-compare(1): Compare two raster dataset Added in version 3.12
gdal-vector-layer-algebra(1): Perform algebraic operation between 2 layers Added in version 3.12
gdal-vsi(1): Entry point for GDAL Virtual System Interface (VSI) commands Added in version 3.11. The subcommands of gdal vsi allow manipulation of files located on the %GDAL Virtual File Systems (compressed, network hosted, etc...): /vsimem, /vsizip, /vsitar, /vsicurl,
gdal_translate(1): Converts raster data between different formats
gdalcompare(1): Compare two images
gdalmdimtranslate(1): Converts multidimensional data between different formats, and perform subsetting
gdiffmk(1): mark differences between groff / nroff / troff files nr *groff_gdiffmk_1_man_C n[.cp] do-fallback 0 !n(.f .nr do-fallback 1 " mandoc n(.g .if !d MR .nr do-fallback 1 " older groff !n(.g .nr do-fallback 1 " non-groff *roff n[do-fallback] {
geany(1), Geany(1): a small and lightweight IDE
gentest(1): Run random generic SMB operations against two SMB servers and show the differences in behavior
getdns_convert(3): getdns_convert_dns_name_to_fqdn, getdns_convert_fqdn_to_dns_name -- convert dname between presentation- and wire-format
gethostbyname(3), gethostbyaddr(3), gethostent(3), sethostent(3), endhostent(3), herror(3): get network host entry
getipnodebyname(3), getipnodebyaddr(3): get network host entry .br freehostent free network host entry
getnetent(3), getnetbyaddr(3), getnetbyname(3), setnetent(3), endnetent(3): get networks entry
gh-codespace-cp(1): Copy files between local and remote file systems
git-arc(1), git arc(1): a wrapper to improve integration between git and arcanist
git-diff(1): Show changes between commits, commit and working tree, etc
git-diff-tree(1): Compares the content and mode of blobs found via two tree objects
git-guilt(1): calculate change between two revisions
git-instaweb(1): Instantly browse your working repository in gitweb
git-lfs-filter-process(1): Git filter process that converts between pointer and actual content
git-merge(1): Join two or more development histories together
git-merge-repo(1): Merge two repo histories
git-pkgs-diff(1): Compare dependencies between commits or working tree
git-pkgs-diff-file(1): Compare dependencies between two files
git-pkgs-sbom(1): Generate Software Bill of Materials
git-pkgs-vulns-diff(1): Compare vulnerabilities between commits
git-range-diff(1): Compare two commit ranges (e.g. two versions of a branch)
git-svn(1): Bidirectional operation between a Subversion repository and Git
gitdiffcore(7): Tweaking diff output
gittutorial-2(7): A tutorial introduction to Git: part two
gitweb(1): Git web interface (web frontend to Git repositories)
gitweb.conf(5): Gitweb (Git web interface) configuration file
gitworkflows(7): An overview of recommended workflows with Git
gjoin(1), join(1): join lines of two files on a common field
gkermit(1): G-Kermit (GNU Kermit) 1.00 file transfer software
glCopyTexSubImage2D(3), "glCopyTexSubImage2D(3): copy a two-dimensional texture subimage
glTexImage2D(3), "glTexImage2D(3): specify a two-dimensional texture image
glTexSubImage1D(3), "glTexSubImage1D(3): specify a two-dimensional texture subimage
glTexSubImage2D(3), "glTexSubImage2D(3): specify a two-dimensional texture subimage
gl_setcontextwidth(3), gl_setcontextheight(3): set the dimension of a context
gl_setwritemode(3): set the font writemode flags
glab-attestation(1): Manage software attestations. (EXPERIMENTAL)
glab-stack-switch(1): Switch between stacks. (EXPERIMENTAL)
gleTwistExtrusion(3): Extrude arbitrary 2D contour along arbitrary 3D path, specifying local rotations (twists)
gleTwistExtrusion(3gle): Extrude arbitrary 2D contour along arbitrary 3D path, specifying local rotations (twists)
glknots(6): generates some twisting 3d knot patterns
gln(1), ln(1): make links between files
glutInitWindowPosition(3), glutInitWindowPositionWindowPosition(3), glutInitWindowSize(3): set the initial window position and size respectively
glutPostOverlayRedisplay(3), glutPostWindowOverlayRedisplay(3): marks the overlay of the current or specified window as needing to be redisplayed
glutPostRedisplay(3), glutPostWindowRedisplay(3): marks the current or specified window as needing to be redisplayed
glutSetWindow(3): sets the current window; glutGetWindow - returns the identifier of the current window
glutSetWindowTitle(3), glutSetIconTitle(3): change the window or icon title respectively of the current top-level window
glutSolidCone(3), glutWireCone(3): render a solid or wireframe cone respectively
glutSolidCube(3), glutWireCube(3): render a solid or wireframe cube respectively
glutSolidDodecahedron(3), glutWireDodecahedron(3): render a solid or wireframe dodecahedron (12-sided regular solid) respectively
glutSolidIcosahedron(3), glutWireIcosahedron(3): render a solid or wireframe icosahedron (20-sided regular solid) respectively
glutSolidOctahedron(3), glutWireOctahedron(3): render a solid or wireframe octahedron (8-sided regular solid) respectively
glutSolidSphere(3), glutWireSphere(3): render a solid or wireframe sphere respectively
glutSolidTeapot(3), glutWireTeapot(3): render a solid or wireframe teapot respectively
glutSolidTetrahedron(3), glutWireTetrahedron(3): render a solid or wireframe tetrahedron (4-sided regular solid) respectively
glutSolidTorus(3), glutWireTorus(3): render a solid or wireframe torus (doughnut) respectively
glutWarpPointer(3): warps the pointer's location
gmx-confrms(1): Fit two structures and calculates the RMSD
gmx-convert-trj(1): Converts between different trajectory types
gmx-distance(1): Calculate distances between pairs of positions
gmx-mindist(1): Calculate the minimum distance between two groups
gmx-pairdist(1): Calculate pairwise distances between groups of positions
gnbd(8): control utility for the network block device GEOM class
gnmanalyse(1): Analyses networks
gnmmanage(1): Manages networks
gnunet-nat-server(1): help GNUnet setup test network setup with NAT
gnunet-nse(1): show network size estimates from NSE service
gnutls_x509_crt_equals(3): This function compares two gnutls_x509_crt_t certificates
gource(1), Gource(1): a software version control visualization
gpinky(1), pinky(1): lightweight finger
gprtoolsusersguide(1): GPR Tools User's Guide 26.0.0 Version 26.0.0 Date: Aug 27, 2026 AdaCore Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled %GNU Free Documentation License
gradient-convert(1): convert gradients between formats
groff_diff(7): differences between GNU troff and classical troff
gsimplecal(1): lightweight calendar applet
gtkpod(1): GTK2 based software for managing songs and playlists on an Apple iPod
headroom(6): a twitchy head
heic2stw(1): convert from GNOME Timed Wallpaper to the Simple Timed Wallpaper format
herbstclient(1): sends commands to a running herbstluftwm instance via X
herbstluftwm(1): a manual tiling window manager for X
herbstluftwm-tutorial(7): A tutorial introduction to herbstluftwm
hose(1): the client end of a BSD network pipe netpipes 4.2
hosts.conf(5): Access control for Network UPS Tools CGI programs
hping3(8): send (almost) arbitrary TCP/IP packets to network hosts
hsv_to_rgb(3), rgb_to_hsv(3): Converts color values between the HSV and RGB color spaces. Allegro game programming library
hwloc-diff(1): Compute differences between two XML topologies
hwlocality_distances_add(3): Add distances between objects
hwlocality_distances_get(3): Retrieve distances between objects
hwlocality_distances_remove(3): Remove distances between objects
hwlocality_helper_nodeset_convert(3): Converting between CPU sets and node sets
hwlocality_object_strings(3): Converting between Object Types and Attributes, and Strings
hwlocality_shmem(3): Sharing topologies between processes
hxnetload(8), netload(8): show utilization of network interface
hxref(1): generate cross-references inside and between HTML files
hydra(1): a very fast network logon cracker which supports many different services
hypervisor_mode(7): allows you to run simultaneously many virtual router instances, and to simulate ATM, Ethernet or Frame(hyRelay networks
icedtea-web(1): provides a Free Software web browser plugin running applets written in the Java programming language and an implementation of Java Web Start, originally based on the NetX project. NetX allows Java applets and applications to be downloaded over the network, cached, and (by default) run in a secure sandbox environment. Subsequent runs of the applet download the latest version automatically. Update and security settings, among others, can be set using the itw-settings command. icedtea-web also includes a plugin to enable Java applets (http://www.java.com/en/download/testjava.jsp) within web browsers. Names and email addresses of contributors to this project can be found in the file AUTHORS in the IcedTea-Web root directory. The full GPLv2 license of this project can be found in the file COPYING in the IcedTea-Web root directory. News about releases of this project can be found in the file NEWS in the IcedTea-Web root directory
icinga2(8): The Icinga 2 network monitoring daemon
id3convert(1): Converts between id3v1 and id3v2 tags of an mp3 file
idn_comparenames(3), idn_decodename2(3): compare two internationzalized domain names
if_util(3): system networking interface utility routines
ifdata(1): get network interface info without parsing ifconfig output
image_matchstorage(3), image_matchstorage (3): test if two vids share the same underlying storage
image_sharestorage(3), image_sharestorage (3): Setup two VIDs to use the same texture store
imapsync(1): Email tool for syncing two IMAP accounts, one way, and without duplicates
img-png(n): Img, Portable Network Graphics format (png)
implybddnode(3): computes a bdd that implies a conjonction of two bdd nodes. man1/alc_origin.1
inet_cidr(3), inet_cidr_ntop(3), inet_cidr_pton(3): network translation routines
interaggregate(6): Visualize the momentary and aggregate intersections between slowly moving circles
interdiff(1): show differences between two diff files
intermomentary(6): Visualize the momentary and aggregate intersections between slowly moving circles
intersectbddnode(3): tests for an intersection between two bdd nodes. man1/alc_origin.1
intltool-prepare(8): Prepare software to make use of intltool
intltoolize(8): copy intltool related files to software package
iodbctest(1), iodbctestw(1): iODBC Demonstration programs
iograph(8): create HTML graphs showing network traffic
ipaddr_local(3): resolve the address of a local network interface
ipaggcreate(1): produce aggregate statistics of network traffic or trace
ipaggmanip(1): manipulate aggregate statistics, often of network traffic
ipcalc(1): Perform simple operations on IP addresses and networks
iperf(1): perform network traffic tests using network sockets. Metrics include throughput and latency or link capacity and responsiveness
iperf3(1): perform network throughput tests
ipetoipe(1): Convert between Ipe file formats
ipmiping(8): send IPMI Get Authentication Capability request to network hosts
ipsumdump(1): produce ASCII summary of network traffic or tcpdump(1) trace
ipv6toolkit.conf(5): Configuration file for the SI6 Networks' IPv6 address monitoring daemon (ipv6mon)
ircd(8): ircd-hybrid: an advanced, lightweight Internet Relay Chat Daemon
is_compatible_font(3): Check if two fonts are of the same type. Allegro game programming library
is_same_bitmap(3): Tells if two bitmaps describe the same drawing surface. Allegro game programming library
isablequalexpr(3): tests if two expressions are strictly identicals. man1/alc_origin.1
isablsimilarexpr(3): tests if two expressions have the same morphology. man1/alc_origin.1
iscsi-swp(1): Utility to get/set software write protect on an iSCSI LUN
isisd(8): an IS-IS routing engine for use with Quagga routing software
itweb-javaws(1), javaws(1): a Java Web Start client
itweb-policyeditor(1), policyeditor(1): view and modify security policy settings for javaws and the browser plugin
itweb-settings(1): view and modify settings for javaws and the browser plugin
jellyfish(1), Jellyfish(1): is a software to count k-mers in DNA sequences
jira-issue-link(7): Link connects two issues
jira-issue-unlink(7): Unlink disconnects two issues from each other
jj-diff(1): Compare file contents between two revisions
jj-interdiff(1): Show differences between the diffs of two revisions
jj-operation-diff(1): Compare changes to the repository between two operations
jj-split(1): Split a revision in two
jnettop(8): View hosts/ports taking up the most network traffic
jng(5): JPEG Network Graphics (JNG) sub-format
jose-fmt(1): Converts JSON between serialization formats
jose-jwe-fmt(1): Converts a JWE between serialization formats
jose-jwk-eql(1): Checks if two keys are equal
jose-jwk-exc(1): Performs a key exchange using the two input keys
jose-jws-fmt(1): Converts a JWS between serialization formats
kakasi(1), KAKASI(1): Kanji kana simple inverter (between Kanji, both Kana and Romaji)
kaleidocycle(6): draws twistable rings of tetrahedra
kermit(1): C(hyKermit 10.0: transport(hy and platform(hyindependent interactive and scriptable communications software. This document is intended to give the beginner sufficient information to make basic use of C(hyKermit 10.0. Although it might be rather long for a Unix manual page, it's still far shorter than the C(hyKermit manual, which should be consulted for advanced topics such as customization, character(hysets, scripting, etc. We also attempt to provide a clear structural overview of C(hyKermit's many capabilities, functional areas, states, and modes and their interrelation, that should be helpful to beginners and veterans alike, as well as to those upgrading to version 10.0 from earlier releases. This document is also available as a Web page at: https://kermitproject.org/ckututor.html
knet_handle_get_transport_reconnect_interval(3): Get the interval between transport attempts to reconnect a failed link
knet_handle_pmtud_getfreq(3): Get the interval between PMTUd scans
knet_handle_pmtud_setfreq(3): Set the interval between PMTUd scans
knet_handle_set_transport_reconnect_interval(3): Set the interval between transport attempts to reconnect a failed link
knocker(1): An easy to use network security port scanner
krb5_principal_intro(3): The principal handing functions. A Kerberos principal is a email address looking string that contains two parts separated by . The second part is the kerberos realm the principal belongs to and the first is a list of 0 or more components. For example lha@SU.SE host/hummel.it.su.se@SU.SE host/admin@H5L.ORG See the library functions here: Heimdal Kerberos 5 principal functions
krusader(1): advanced twin-panel file manager and FTP client by KDE
ktserver(1): a lightweight database server
lalign(1): compare two protein or DNA sequences for local similarity and show the local sequence alignments plalign,flalign - compare two sequences for local similarity and plot the local sequence alignments
latexdiff(1): determine and markup differences between two latex files
ldap(3): OpenLDAP Lightweight Directory Access Protocol API
ldns-compare-zones(1): read and compare two zonefiles and print differences
ldns_dname_cat_clone(3), ldns_dname_cat(3): concatenate two dnames
ldns_dname_compare(3), ldns_dname_interval(3): compare two dnames
leaf(1): Lightweight Editor of Ascii(and more) Files
legesmotus(6): A team-based, networked, 2D shooter set in zero-gravity
lft(8): display the route packets take to a network host/socket using one of several layer-4 protocols and methods; optionally show heuristic network information in transitu
libevdev-tweak-device(1): modify an evdev kernel device
libiperf(3): API for iperf3 network throughput tester
libmng(3): Multiple-image Network Graphics (MNG) Reference Library 1.0.9
libnids(3): network intrusion detection system E-box library
libowfat_add_of(3), add_of(3): add two integers, check for arithmetic overflow
libowfat_array_equal(3), array_equal(3): compare two arrays for equality
libowfat_byte_diff(3), byte_diff(3): compare two strings
libowfat_byte_equal(3), byte_equal(3): compare two strings
libowfat_byte_equal_notimingattack(3), byte_equal_notimingattack(3): compare two strings
libowfat_io_dontwantread(3), io_dontwantread(3): signal that you do not want to read from a descriptor
libowfat_io_dontwantwrite(3), io_dontwantwrite(3): signal that you do not want to write to a descriptor
libowfat_io_wantwrite(3), io_wantwrite(3): signal that you want to write to a descriptor
libowfat_str_diff(3), str_diff(3): compare two ASCIIZ strings
libowfat_str_diffn(3), str_diffn(3): compare two ASCIIZ strings
libowfat_str_equal(3), str_equal(3): compare two ASCIIZ strings

home | help