Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
Q_FRAWMASK(3), Q_GFRAW(3), Q_GFABSVAL(3), Q_GFVAL(3), Q_SFVAL(3)
fixed-point math functions which manipulate the fractional data bits
Q_IFRAWMASK(3), Q_IFVALIMASK(3), Q_IFVALFMASK(3), Q_GIFRAW(3), Q_GIFABSVAL(3), Q_GIFVAL(3), Q_SIFVAL(3), Q_SIFVALS(3)
fixed-point math functions which manipulate the combined integer/fractional data bits
devstat(9), devstat_end_transaction(9), devstat_end_transaction_bio(9), devstat_end_transaction_bio_bt(9), devstat_new_entry(9), devstat_remove_entry(9), devstat_start_transaction(9), devstat_start_transaction_bio(9)
kernel interface for keeping device statistics
efivar(8)
UEFI environment variable interaction
frexp(3), frexpf(3), frexpl(3)
convert floating-point number to fractional and integral components
modf(3), modff(3), modfl(3)
extract signed integral and fractional values from floating-point number
pam_end(3)
terminate the PAM transaction
pam_start(3)
initiate a PAM transaction
pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_clear_pme(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_enable_pme(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_has_pm(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9)
PCI bus interface
posix_spawn_file_actions_addopen(3), posix_spawn_file_actions_adddup2(3), posix_spawn_file_actions_addclose(3), posix_spawn_file_actions_addclosefrom_np(3), posix_spawn_file_actions_addchdir_np(3), posix_spawn_file_actions_addfchdir_np(3)
add open, dup2, close, closefrom, or chdir/fchdir actions to spawn file actions object
posix_spawn_file_actions_init(3), posix_spawn_file_actions_destroy(3)
initialize and destroy spawn file actions object
sigaction(2)
software signal facilities
usbhidaction(1)
perform actions according to USB HID controls
OSSL_CMP_CTX_new(3), OSSL_CMP_CTX_free(3), OSSL_CMP_CTX_reinit(3), OSSL_CMP_CTX_get0_libctx(3), OSSL_CMP_CTX_get0_propq(3), OSSL_CMP_CTX_set_option(3), OSSL_CMP_CTX_get_option(3), OSSL_CMP_CTX_set_log_cb(3), OSSL_CMP_CTX_set_log_verbosity(3), OSSL_CMP_CTX_print_errors(3), OSSL_CMP_CTX_set1_serverPath(3), OSSL_CMP_CTX_set1_server(3), OSSL_CMP_CTX_set_serverPort(3), OSSL_CMP_CTX_set1_proxy(3), OSSL_CMP_CTX_set1_no_proxy(3), OSSL_CMP_CTX_set_http_cb(3), OSSL_CMP_CTX_set_http_cb_arg(3), OSSL_CMP_CTX_get_http_cb_arg(3), OSSL_CMP_transfer_cb_t(3), OSSL_CMP_CTX_set_transfer_cb(3), OSSL_CMP_CTX_set_transfer_cb_arg(3), OSSL_CMP_CTX_get_transfer_cb_arg(3), OSSL_CMP_CTX_set1_srvCert(3), OSSL_CMP_CTX_set1_expected_sender(3), OSSL_CMP_CTX_set0_trusted(3), OSSL_CMP_CTX_set0_trustedStore(3), OSSL_CMP_CTX_get0_trusted(3), OSSL_CMP_CTX_get0_trustedStore(3), OSSL_CMP_CTX_set1_untrusted(3), OSSL_CMP_CTX_get0_untrusted(3), OSSL_CMP_CTX_set1_cert(3), OSSL_CMP_CTX_build_cert_chain(3), OSSL_CMP_CTX_set1_pkey(3), OSSL_CMP_CTX_set1_referenceValue(3), OSSL_CMP_CTX_set1_secretValue(3), OSSL_CMP_CTX_set1_recipient(3), OSSL_CMP_CTX_push0_geninfo_ITAV(3), OSSL_CMP_CTX_reset_geninfo_ITAVs(3), OSSL_CMP_CTX_get0_geninfo_ITAVs(3), OSSL_CMP_CTX_set1_extraCertsOut(3), OSSL_CMP_CTX_set0_newPkey(3), OSSL_CMP_CTX_get0_newPkey(3), OSSL_CMP_CTX_set1_issuer(3), OSSL_CMP_CTX_set1_serialNumber(3), OSSL_CMP_CTX_set1_subjectName(3), OSSL_CMP_CTX_push1_subjectAltName(3), OSSL_CMP_CTX_set0_reqExtensions(3), OSSL_CMP_CTX_reqExtensions_have_SAN(3), OSSL_CMP_CTX_push0_policy(3), OSSL_CMP_CTX_set1_oldCert(3), OSSL_CMP_CTX_set1_p10CSR(3), OSSL_CMP_CTX_push0_genm_ITAV(3), OSSL_CMP_certConf_cb_t(3), OSSL_CMP_certConf_cb(3), OSSL_CMP_CTX_set_certConf_cb(3), OSSL_CMP_CTX_set_certConf_cb_arg(3), OSSL_CMP_CTX_get_certConf_cb_arg(3), OSSL_CMP_CTX_get_status(3), OSSL_CMP_CTX_get0_statusString(3), OSSL_CMP_CTX_get_failInfoCode(3), OSSL_CMP_CTX_get0_validatedSrvCert(3), OSSL_CMP_CTX_get0_newCert(3), OSSL_CMP_CTX_get1_newChain(3), OSSL_CMP_CTX_get1_caPubs(3), OSSL_CMP_CTX_get1_extraCertsIn(3), OSSL_CMP_CTX_set1_transactionID(3), OSSL_CMP_CTX_set1_senderNonce(3)
functions for managing the CMP client context data structure
OSSL_CMP_HDR_get0_transactionID(3), OSSL_CMP_HDR_get0_recipNonce(3), OSSL_CMP_HDR_get0_geninfo_ITAVs(3)
functions manipulating CMP message headers
OSSL_CMP_MSG_get0_header(3), OSSL_CMP_MSG_get_bodytype(3), OSSL_CMP_MSG_get0_certreq_publickey(3), OSSL_CMP_MSG_update_transactionID(3), OSSL_CMP_MSG_update_recipNonce(3), OSSL_CMP_CTX_setup_CRM(3), OSSL_CMP_MSG_read(3), OSSL_CMP_MSG_write(3), d2i_OSSL_CMP_MSG_bio(3), i2d_OSSL_CMP_MSG_bio(3)
function(s) manipulating CMP messages
OSSL_CMP_SRV_process_request(3), OSSL_CMP_CTX_server_perform(3), OSSL_CMP_SRV_CTX_new(3), OSSL_CMP_SRV_CTX_free(3), OSSL_CMP_SRV_cert_request_cb_t(3), OSSL_CMP_SRV_rr_cb_t(3), OSSL_CMP_SRV_certConf_cb_t(3), OSSL_CMP_SRV_genm_cb_t(3), OSSL_CMP_SRV_error_cb_t(3), OSSL_CMP_SRV_pollReq_cb_t(3), OSSL_CMP_SRV_CTX_init(3), OSSL_CMP_SRV_delayed_delivery_cb_t(3), OSSL_CMP_SRV_clean_transaction_cb_t(3), OSSL_CMP_SRV_CTX_init_trans(3), OSSL_CMP_SRV_CTX_get0_cmp_ctx(3), OSSL_CMP_SRV_CTX_get0_custom_ctx(3), OSSL_CMP_SRV_CTX_set_send_unprotected_errors(3), OSSL_CMP_SRV_CTX_set_accept_unprotected(3), OSSL_CMP_SRV_CTX_set_accept_raverified(3), OSSL_CMP_SRV_CTX_set_grant_implicit_confirm(3)
generic functions to set up and control a CMP server
OSSL_CMP_exec_certreq(3), OSSL_CMP_exec_IR_ses(3), OSSL_CMP_exec_CR_ses(3), OSSL_CMP_exec_P10CR_ses(3), OSSL_CMP_exec_KUR_ses(3), OSSL_CMP_IR(3), OSSL_CMP_CR(3), OSSL_CMP_P10CR(3), OSSL_CMP_KUR(3), OSSL_CMP_try_certreq(3), OSSL_CMP_exec_RR_ses(3), OSSL_CMP_exec_GENM_ses(3), OSSL_CMP_get1_caCerts(3), OSSL_CMP_get1_rootCaKeyUpdate(3), OSSL_CMP_get1_crlUpdate(3), OSSL_CMP_get1_certReqTemplate(3)
functions implementing CMP client transactions
OSSL_CRMF_MSG_get0_regCtrl_regToken(3), OSSL_CRMF_MSG_set1_regCtrl_regToken(3), OSSL_CRMF_MSG_get0_regCtrl_authenticator(3), OSSL_CRMF_MSG_set1_regCtrl_authenticator(3), OSSL_CRMF_MSG_PKIPublicationInfo_push0_SinglePubInfo(3), OSSL_CRMF_MSG_set0_SinglePubInfo(3), OSSL_CRMF_MSG_set_PKIPublicationInfo_action(3), OSSL_CRMF_MSG_get0_regCtrl_pkiPublicationInfo(3), OSSL_CRMF_MSG_set1_regCtrl_pkiPublicationInfo(3), OSSL_CRMF_MSG_get0_regCtrl_protocolEncrKey(3), OSSL_CRMF_MSG_set1_regCtrl_protocolEncrKey(3), OSSL_CRMF_MSG_get0_regCtrl_oldCertID(3), OSSL_CRMF_MSG_set1_regCtrl_oldCertID(3), OSSL_CRMF_CERTID_gen(3)
functions getting or setting CRMF Registration Controls
UI_STRING(3), UI_string_types(3), UI_get_string_type(3), UI_get_input_flags(3), UI_get0_output_string(3), UI_get0_action_string(3), UI_get0_result_string(3), UI_get_result_string_length(3), UI_get0_test_string(3), UI_get_result_minsize(3), UI_get_result_maxsize(3), UI_set_result(3), UI_set_result_ex(3)
User interface string parsing
bio(7)
Basic I/O abstraction
provider-object(7)
A specification for a provider-native object abstraction
ABORT(7)
abort the current transaction
BEGIN(7)
start a transaction block
COMMIT(7)
commit the current transaction
COMMIT_PREPARED(7)
commit a transaction that was earlier prepared for two-phase commit
END(7)
commit the current transaction
OSSL_CMP_CTX_new(3ossl), OSSL_CMP_CTX_free(3ossl), OSSL_CMP_CTX_reinit(3ossl), OSSL_CMP_CTX_get0_libctx(3ossl), OSSL_CMP_CTX_get0_propq(3ossl), OSSL_CMP_CTX_set_option(3ossl), OSSL_CMP_CTX_get_option(3ossl), OSSL_CMP_CTX_set_log_cb(3ossl), OSSL_CMP_CTX_set_log_verbosity(3ossl), OSSL_CMP_CTX_print_errors(3ossl), OSSL_CMP_CTX_set1_serverPath(3ossl), OSSL_CMP_CTX_set1_server(3ossl), OSSL_CMP_CTX_set_serverPort(3ossl), OSSL_CMP_CTX_set1_proxy(3ossl), OSSL_CMP_CTX_set1_no_proxy(3ossl), OSSL_CMP_CTX_set_http_cb(3ossl), OSSL_CMP_CTX_set_http_cb_arg(3ossl), OSSL_CMP_CTX_get_http_cb_arg(3ossl), OSSL_CMP_transfer_cb_t(3ossl), OSSL_CMP_CTX_set_transfer_cb(3ossl), OSSL_CMP_CTX_set_transfer_cb_arg(3ossl), OSSL_CMP_CTX_get_transfer_cb_arg(3ossl), OSSL_CMP_CTX_set1_srvCert(3ossl), OSSL_CMP_CTX_set1_expected_sender(3ossl), OSSL_CMP_CTX_set0_trusted(3ossl), OSSL_CMP_CTX_set0_trustedStore(3ossl), OSSL_CMP_CTX_get0_trusted(3ossl), OSSL_CMP_CTX_get0_trustedStore(3ossl), OSSL_CMP_CTX_set1_untrusted(3ossl), OSSL_CMP_CTX_get0_untrusted(3ossl), OSSL_CMP_CTX_set1_cert(3ossl), OSSL_CMP_CTX_build_cert_chain(3ossl), OSSL_CMP_CTX_set1_pkey(3ossl), OSSL_CMP_CTX_set1_referenceValue(3ossl), OSSL_CMP_CTX_set1_secretValue(3ossl), OSSL_CMP_CTX_set1_recipient(3ossl), OSSL_CMP_CTX_push0_geninfo_ITAV(3ossl), OSSL_CMP_CTX_reset_geninfo_ITAVs(3ossl), OSSL_CMP_CTX_get0_geninfo_ITAVs(3ossl), OSSL_CMP_CTX_set1_extraCertsOut(3ossl), OSSL_CMP_CTX_set0_newPkey(3ossl), OSSL_CMP_CTX_get0_newPkey(3ossl), OSSL_CMP_CTX_set1_issuer(3ossl), OSSL_CMP_CTX_set1_serialNumber(3ossl), OSSL_CMP_CTX_set1_subjectName(3ossl), OSSL_CMP_CTX_push1_subjectAltName(3ossl), OSSL_CMP_CTX_set0_reqExtensions(3ossl), OSSL_CMP_CTX_reqExtensions_have_SAN(3ossl), OSSL_CMP_CTX_push0_policy(3ossl), OSSL_CMP_CTX_set1_oldCert(3ossl), OSSL_CMP_CTX_set1_p10CSR(3ossl), OSSL_CMP_CTX_push0_genm_ITAV(3ossl), OSSL_CMP_certConf_cb_t(3ossl), OSSL_CMP_certConf_cb(3ossl), OSSL_CMP_CTX_set_certConf_cb(3ossl), OSSL_CMP_CTX_set_certConf_cb_arg(3ossl), OSSL_CMP_CTX_get_certConf_cb_arg(3ossl), OSSL_CMP_CTX_get_status(3ossl), OSSL_CMP_CTX_get0_statusString(3ossl), OSSL_CMP_CTX_get_failInfoCode(3ossl), OSSL_CMP_CTX_get0_validatedSrvCert(3ossl), OSSL_CMP_CTX_get0_newCert(3ossl), OSSL_CMP_CTX_get1_newChain(3ossl), OSSL_CMP_CTX_get1_caPubs(3ossl), OSSL_CMP_CTX_get1_extraCertsIn(3ossl), OSSL_CMP_CTX_set1_transactionID(3ossl), OSSL_CMP_CTX_set1_senderNonce(3ossl)
functions for managing the CMP client context data structure
OSSL_CMP_HDR_get0_transactionID(3ossl), OSSL_CMP_HDR_get0_recipNonce(3ossl), OSSL_CMP_HDR_get0_geninfo_ITAVs(3ossl)
functions manipulating CMP message headers
OSSL_CMP_MSG_get0_header(3ossl), OSSL_CMP_MSG_get_bodytype(3ossl), OSSL_CMP_MSG_get0_certreq_publickey(3ossl), OSSL_CMP_MSG_update_transactionID(3ossl), OSSL_CMP_MSG_update_recipNonce(3ossl), OSSL_CMP_CTX_setup_CRM(3ossl), OSSL_CMP_MSG_read(3ossl), OSSL_CMP_MSG_write(3ossl), d2i_OSSL_CMP_MSG_bio(3ossl), i2d_OSSL_CMP_MSG_bio(3ossl)
function(s) manipulating CMP messages
OSSL_CMP_SRV_process_request(3ossl), OSSL_CMP_CTX_server_perform(3ossl), OSSL_CMP_SRV_CTX_new(3ossl), OSSL_CMP_SRV_CTX_free(3ossl), OSSL_CMP_SRV_cert_request_cb_t(3ossl), OSSL_CMP_SRV_rr_cb_t(3ossl), OSSL_CMP_SRV_certConf_cb_t(3ossl), OSSL_CMP_SRV_genm_cb_t(3ossl), OSSL_CMP_SRV_error_cb_t(3ossl), OSSL_CMP_SRV_pollReq_cb_t(3ossl), OSSL_CMP_SRV_CTX_init(3ossl), OSSL_CMP_SRV_delayed_delivery_cb_t(3ossl), OSSL_CMP_SRV_clean_transaction_cb_t(3ossl), OSSL_CMP_SRV_CTX_init_trans(3ossl), OSSL_CMP_SRV_CTX_get0_cmp_ctx(3ossl), OSSL_CMP_SRV_CTX_get0_custom_ctx(3ossl), OSSL_CMP_SRV_CTX_set_send_unprotected_errors(3ossl), OSSL_CMP_SRV_CTX_set_accept_unprotected(3ossl), OSSL_CMP_SRV_CTX_set_accept_raverified(3ossl), OSSL_CMP_SRV_CTX_set_grant_implicit_confirm(3ossl)
generic functions to set up and control a CMP server
OSSL_CMP_exec_certreq(3ossl), OSSL_CMP_exec_IR_ses(3ossl), OSSL_CMP_exec_CR_ses(3ossl), OSSL_CMP_exec_P10CR_ses(3ossl), OSSL_CMP_exec_KUR_ses(3ossl), OSSL_CMP_IR(3ossl), OSSL_CMP_CR(3ossl), OSSL_CMP_P10CR(3ossl), OSSL_CMP_KUR(3ossl), OSSL_CMP_try_certreq(3ossl), OSSL_CMP_exec_RR_ses(3ossl), OSSL_CMP_exec_GENM_ses(3ossl), OSSL_CMP_get1_caCerts(3ossl), OSSL_CMP_get1_rootCaKeyUpdate(3ossl), OSSL_CMP_get1_crlUpdate(3ossl), OSSL_CMP_get1_certReqTemplate(3ossl)
functions implementing CMP client transactions
OSSL_CRMF_MSG_get0_regCtrl_regToken(3ossl), OSSL_CRMF_MSG_set1_regCtrl_regToken(3ossl), OSSL_CRMF_MSG_get0_regCtrl_authenticator(3ossl), OSSL_CRMF_MSG_set1_regCtrl_authenticator(3ossl), OSSL_CRMF_MSG_PKIPublicationInfo_push0_SinglePubInfo(3ossl), OSSL_CRMF_MSG_set0_SinglePubInfo(3ossl), OSSL_CRMF_MSG_set_PKIPublicationInfo_action(3ossl), OSSL_CRMF_MSG_get0_regCtrl_pkiPublicationInfo(3ossl), OSSL_CRMF_MSG_set1_regCtrl_pkiPublicationInfo(3ossl), OSSL_CRMF_MSG_get0_regCtrl_protocolEncrKey(3ossl), OSSL_CRMF_MSG_set1_regCtrl_protocolEncrKey(3ossl), OSSL_CRMF_MSG_get0_regCtrl_oldCertID(3ossl), OSSL_CRMF_MSG_set1_regCtrl_oldCertID(3ossl), OSSL_CRMF_CERTID_gen(3ossl)
functions getting or setting CRMF Registration Controls
PREPARE_TRANSACTION(7)
prepare the current transaction for two-phase commit
ROLLBACK(7)
abort the current transaction
ROLLBACK_PREPARED(7)
cancel a transaction that was earlier prepared for two-phase commit
RT::Interface::Email::Action::CommandByMail(3)
Change metadata of ticket via email
RT::Interface::Email::Filter::TakeAction(3)
Change metadata of ticket via email
SAVEPOINT(7)
define a new savepoint within the current transaction
SET_CONSTRAINTS(7)
set constraint check timing for the current transaction
SET_TRANSACTION(7)
set the characteristics of the current transaction
SPI_commit(3), SPI_commit_and_chain(3)
commit the current transaction
SPI_rollback(3), SPI_rollback_and_chain(3)
abort the current transaction
SPI_start_transaction(3)
obsolete function
START_TRANSACTION(7)
start a transaction block
Tcl_BadChannelOption.tcl86(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelCloseProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelSeekProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tcl_BadChannelOption.tcl90(3), Tcl_CreateChannel(3), Tcl_GetChannelInstanceData(3), Tcl_GetChannelType(3), Tcl_GetChannelName(3), Tcl_GetChannelHandle(3), Tcl_GetChannelMode(3), Tcl_GetChannelBufferSize(3), Tcl_SetChannelBufferSize(3), Tcl_NotifyChannel(3), Tcl_BadChannelOption(3), Tcl_ChannelName(3), Tcl_ChannelVersion(3), Tcl_ChannelBlockModeProc(3), Tcl_ChannelClose2Proc(3), Tcl_ChannelInputProc(3), Tcl_ChannelOutputProc(3), Tcl_ChannelWideSeekProc(3), Tcl_ChannelTruncateProc(3), Tcl_ChannelSetOptionProc(3), Tcl_ChannelGetOptionProc(3), Tcl_ChannelWatchProc(3), Tcl_ChannelGetHandleProc(3), Tcl_ChannelFlushProc(3), Tcl_ChannelHandlerProc(3), Tcl_ChannelThreadActionProc(3), Tcl_IsChannelShared(3), Tcl_IsChannelRegistered(3), Tcl_CutChannel(3), Tcl_SpliceChannel(3), Tcl_IsChannelExisting(3), Tcl_ClearChannelHandlers(3), Tcl_GetChannelThread(3), Tcl_ChannelBuffered(3)
procedures for creating and manipulating channels
Tk_AttachHWND.tk86(3), Tk_GetHWND(3), Tk_AttachHWND(3)
manage interactions between the Windows handle and an X window
UI_STRING(3), UI_string_types(3), UI_get_string_type(3), UI_get_input_flags(3), UI_get0_output_string(3), UI_get0_action_string(3), UI_get0_result_string(3), UI_get_result_string_length(3), UI_get0_test_string(3), UI_get_result_minsize(3), UI_get_result_maxsize(3), UI_set_result(3), UI_set_result_ex(3)
User interface string parsing
UI_STRING(3ossl), UI_string_types(3ossl), UI_get_string_type(3ossl), UI_get_input_flags(3ossl), UI_get0_output_string(3ossl), UI_get0_action_string(3ossl), UI_get0_result_string(3ossl), UI_get_result_string_length(3ossl), UI_get0_test_string(3ossl), UI_get_result_minsize(3ossl), UI_get_result_maxsize(3ossl), UI_set_result(3ossl), UI_set_result_ex(3ossl)
User interface string parsing
XkbActionCtrls(3)
Returns the ctrls fields of act converted to an unsigned int
XkbActionSetCtrls(3)
Sets the ctrls0 through ctrls3 fields of act from ctrls
XkbGetDeviceButtonActions(3)
Query the button actions associated with an X Input Extension device
XkbGetDeviceInfo(3)
Determine whether the X server allows Xkb access to particular capabilities of input devices other than the core X keyboard, or to determine the status of indicator maps, indicator names or button actions on a non-KeyClass extension device
XkbGetDeviceInfoChanges(3)
Query the changes that have occurred in the button actions or indicator names and indicator maps associated with an input extension device
XkbGetKeyActions(3)
Update the actions (the key_acts array) for a subset of the keys in a keyboard description
XkbKeyAction(3)
Returns the key action
XkbKeyActionEntry(3)
Returns a pointer to the key action corresponding to group grp and shift level lvl from the two-dimensional table of key actions associated with the key corresponding to keycode
XkbKeyActionsPtr(3)
Returns a pointer to the two-dimensional array of key actions associated with the key corresponding to keycode
XkbKeyHasActions(3)
Determines if the key corresponding to keycode has any actions associated with it
XkbKeyNumActions(3)
Computes the number of actions associated with the key corresponding to keycode
XkbModActionVMods(3)
Returns the vmods1 and vmods2 fields of act converted to the vmods format of an Xkb modifier description
XkbPtrActionX(3)
Returns the high_XXX and low_XXX fields of act converted to a signed int
XkbPtrActionY(3)
Returns the high_YYY and low_YYY fields of act converted to a signed int
XkbResizeDeviceButtonActions(3)
Allocate additional space for button actions in an XkbDeviceInfoRec structure
XkbResizeKeyActions(3)
Change the number of actions bound to a key
XkbSetDeviceButtonActions(3)
Change only the button actions for an input extension device
XkbSetModActionVMods(3)
Sets the vmods1 and vmods2 fields of act using the vmods format of an Xkb modifier description
XkbSetPtrActionX(3)
Sets the high_XXX and low_XXX fields of act from the signed integer value x
XkbSetPtrActionY(3)
Sets the high_YYY and low_YYY fields of act from the signed integer value y
XmDragCancel(3)
A Drag and Drop function that terminates a drag transaction "XmDragCancel" "Drag and Drop functions" "XmDragCancel"
XmDragStart(3)
A Drag and Drop function that initiates a drag and drop transaction "XmDragStart" "Drag and Drop functions" "XmDragStart"
XmSetProtocolHooks(3)
A VendorShell function that allows preactions and postactions to be executed when a protocol message is received from MWM "XmSetProtocolHooks" "VendorShell functions" "XmSetProtocolHooks" "protocols"
XmSetWMProtocolHooks(3)
A VendorShell convenience interface that allows preactions and postactions to be executed when a protocol message is received from the window manager "XmSetWMProtocolHooks" "VendorShell functions" "XmSetWMProtocolHooks" "protocols"
XmTrackingEvent(3)
A Toolkit function that provides a modal interaction "XmTrackingEvent" "Toolkit functions" "XmTrackingEvent"
XmTrackingLocate(3)
A Toolkit function that provides a modal interaction "XmTrackingLocate" "Toolkit functions" "XmTrackingLocate"
XtAddActions(3)
register an action table
XtAppAddActionHook(3), XtRemoveActionHook(3)
register an action hook procedure
XtAppAddActions(3)
register an action table
XtCallActionProc(3)
invoke an action procedure directly
XtGetActionKeysym(3)
obtain corresponding keysym
XtGetActionList(3)
obtain class action list
XtRegisterGrabAction(3)
register button and key grabs
actiona(1), Actiona(1)
Task automation
adcli(8)
Tool for performing actions on an Active Directory domain
amoebax(6)
Match-3 action-puzzle game
amrestore(8)
low-level data-extraction from Amanda volumes
as3compile(1)
Compile .as ActionScript 3.0 files to swf
attraction(6)
interactions of opposing forces
avahi-dnsconfd.action(8)
avahi-dnsconfd action script
beetsconfig(5)
beets configuration file Beets has an extensive configuration system that lets you customize nearly every aspect of its operation. To configure beets, you create a file called config.yaml. The location of the file depends on your platform (type beet config -p to see the path on your system): 0.0 (bu 2 On Unix-like OSes, write ~/.config/beets/config.yaml. (bu 2 On Windows, use %APPDATA%ebeetseconfig.yaml. This is usually in a directory like C:eUserseYoueAppDataeRoaming. (bu 2 On OS X, you can use either the Unix location or ~/Library/Application Support/beets/config.yaml. You can launch your text editor to create or update your configuration by typing beet config -e. (See the X'tty: link #config-cmd'%configX'tty: link' command for details.) It is also possible to customize the location of the configuration file and even use multiple layers of configuration. See %Configuration Location, below. The config file uses X'tty: link https://yaml.org/'%YAMLX'tty: link' syntax. You can use the full power of YAML, but most configuration options are simple key/value pairs. This means your config file will look like this: 0.0 3.5 option: value another_option: foo bigger_option: key: value foo: bar In YAML, you will need to use spaces (not tabs!) to indent some lines. If you have questions about more sophisticated syntax, take a look at the X'tty: link https://yaml.org/'%YAMLX'tty: link' documentation. The rest of this page enumerates the dizzying litany of configuration options available in beets. You might also want to see an %example. 0.0 (bu 2 %Global Options 2.0 (bu 2 %library (bu 2 %directory (bu 2 %plugins (bu 2 %include (bu 2 %pluginpath (bu 2 %ignore (bu 2 %ignore_hidden (bu 2 %replace (bu 2 %path_sep_replace (bu 2 %asciify_paths (bu 2 %art_filename (bu 2 %threaded (bu 2 %format_item (bu 2 %format_album (bu 2 %sort_item (bu 2 %sort_album (bu 2 %sort_case_insensitive (bu 2 %original_date (bu 2 %artist_credit (bu 2 %per_disc_numbering (bu 2 %aunique (bu 2 %sunique (bu 2 %terminal_encoding (bu 2 %clutter (bu 2 %max_filename_length (bu 2 %id3v23 (bu 2 %va_name (bu 2 %UI Options 2.0 (bu 2 %color (bu 2 %colors (bu 2 %terminal_width (bu 2 %length_diff_thresh (bu 2 %import (bu 2 %Importer Options 2.0 (bu 2 %write (bu 2 %copy (bu 2 %move (bu 2 %link (bu 2 %hardlink (bu 2 %reflink (bu 2 %resume (bu 2 %incremental (bu 2 %incremental_skip_later (bu 2 %from_scratch (bu 2 %quiet (bu 2 %quiet_fallback (bu 2 %none_rec_action (bu 2 %timid (bu 2 %log (bu 2 %default_action (bu 2 %languages (bu 2 %ignored_alias_types (bu 2 %detail (bu 2 %group_albums (bu 2 %autotag (bu 2 %duplicate_keys (bu 2 %duplicate_action (bu 2 %duplicate_verbose_prompt (bu 2 %bell (bu 2 %set_fields (bu 2 %singleton_album_disambig (bu 2 %MusicBrainz Options 2.0 (bu 2 %enabled (bu 2 %searchlimit (bu 2 %extra_tags (bu 2 %genres (bu 2 %external_ids (bu 2 %Autotagger Matching Options 2.0 (bu 2 %max_rec (bu 2 %preferred (bu 2 %ignored (bu 2 %required (bu 2 %ignored_media (bu 2 %ignore_data_tracks (bu 2 %ignore_video_tracks (bu 2 %Path Format Configuration (bu 2 %Configuration Location 2.0 (bu 2 %Environment Variable (bu 2 %Command-Line Option (bu 2 %Default Location (bu 2 %Example
bio(7)
Basic I/O abstraction
bio(7ossl)
Basic I/O abstraction
busy(n)
Make Tk widgets busy, temporarily blocking user interactions
button.tk86(n), button(n)
Create and manipulate 'button' action widgets
ck_pr_rtm(3), ck_pr_rtm_begin(3), ck_pr_rtm_end(3), ck_pr_rtm_abort(3), ck_pr_rtm_test(3)
restricted transactional memory
ck_pr_sub(3), ck_pr_sub_ptr(3), ck_pr_sub_double(3), ck_pr_sub_char(3), ck_pr_sub_uint(3), ck_pr_sub_int(3), ck_pr_sub_64(3), ck_pr_sub_32(3), ck_pr_sub_16(3), ck_pr_sub_8(3)
atomic subtraction operations
curl_multi_socket_action(3)
read/write available data given an action
curl_multi_timeout(3)
how long to wait for action before proceeding
dc_device_set_events(3)
set events logged during device interaction
devilspie(1)
perform actions on windows as they are created
devilspie2(1), Devilspie2(1)
perform scripted actions on windows as they are created
domino-chain(6), Domino-Chain(6)
Rearrange dominoes on different platforms to start a chain reaction
extractvectors(1)
Vector Extraction Tool for OMNeT++ Vector Files
ezmlm-confirm(1)
process user actions for message confirm and discard
ezmlm-moderate(1)
process moderator actions for message acceptance and rejection
fex(1)
simple and powerful field extraction
fixproc(1)
Fixes a process by performing the specified action
flare(6)
action role-playing engine
frr(1)
a systemd interaction script
gammu-smsd-dbi(7)
gammu-smsd(1) backend using DBI abstraction layer to use any supported database as a message storage rst2man-indent-level 0 1 rstReportMargin $1
gammu-smsd-odbc(7)
gammu-smsd(1) backend using ODBC abstraction layer to use any supported database as a message storage rst2man-indent-level 0 1 rstReportMargin $1
gammu-smsd-sql(7)
gammu-smsd(1) backend using SQL abstraction layer to use any supported database as a message storage rst2man-indent-level 0 1 rstReportMargin $1
gensio_acc_control(3)
Perform gensio accepter specific actions
gensio_control(3)
Perform gensio-specific actions
gensio_os_funcs(3)
Abstraction for some operating system functions used by the gensio library
getdefs(1), *[B-Font]getdefs(1)
AutoGen Definition Extraction Tool
gh-cache(1)
Manage GitHub Actions caches
gh-cache-delete(1)
Delete GitHub Actions caches
gh-cache-list(1)
List GitHub Actions caches
gh-variable(1)
Manage GitHub Actions variables
gh-workflow(1)
View details about GitHub Actions workflows
ghostwriter(1)
distraction-free text editor for Markdown
gl-117(6)
an OpenGL action flight simulator
glStencilOp(3), "glStencilOp(3)
set stencil test actions delim $$
gl_get_line(3), new_GetLine(3), del_GetLine(3), gl_customize_completion(3), gl_change_terminal(3), gl_configure_getline(3), gl_load_history(3), gl_save_history(3), gl_group_history(3), gl_show_history(3), gl_watch_fd(3), gl_inactivity_timeout(3), gl_terminal_size(3), gl_set_term_size(3), gl_resize_history(3), gl_limit_history(3), gl_clear_history(3), gl_toggle_history(3), gl_lookup_history(3), gl_state_of_history(3), gl_range_of_history(3), gl_size_of_history(3), gl_echo_mode(3), gl_replace_prompt(3), gl_prompt_style(3), gl_ignore_signal(3), gl_trap_signal(3), gl_last_signal(3), gl_completion_action(3), gl_display_text(3), gl_return_status(3), gl_error_message(3), gl_catch_blocked(3), gl_list_signals(3), gl_bind_keyseq(3), gl_erase_terminal(3), gl_automatic_history(3), gl_append_history(3), gl_query_char(3), gl_read_char(3)
allow the user to compose an input line
gnetlist(1)
gEDA/gaf Netlist Extraction and Generation
helios(1)
attraction/repulsion particle effects and some smooth surfaces
icebreaker(6)
An addictive action-puzzle game for X
innwatch.ctl(5)
List of supervisory actions taken by innwatch
iprop(8), ipropd-master(8), ipropd-slave(8)
propagate transactions from a Heimdal Kerberos master KDC to slave KDCs
jdupes(1)
finds and performs actions upon duplicate files
kbruch(1)
Learn calculating with fractions and percentages
labwc-actions(5), labwc(5)
actions
lepton-netlist(1)
Lepton EDA Netlist Extraction and Generation
home | help