Skip site
navigation (1)Skip section navigation (2)
FreeBSD Manual Pages
- BUS_CONFIG_INTR(9), bus_config_intr(9)
- configure interrupt polarity and trigger mode
- VFS_SET(9)
- set up loadable file system vfsconf
- VOP_PATHCONF(9)
- return POSIX pathconf information
- acpi(4)
- Advanced Configuration and Power Management support
- acpiconf(8)
- control ACPI power management
- adduser.conf(5)
- adduser(8) configuration file
- atf-c(3), ATF_CHECK(3), ATF_CHECK_MSG(3), ATF_CHECK_EQ(3), ATF_CHECK_EQ_MSG(3), ATF_CHECK_MATCH(3), ATF_CHECK_MATCH_MSG(3), ATF_CHECK_STREQ(3), ATF_CHECK_STREQ_MSG(3), ATF_CHECK_INTEQ(3), ATF_CHECK_INTEQ_MSG(3), ATF_CHECK_ERRNO(3), ATF_REQUIRE(3), ATF_REQUIRE_MSG(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_EQ_MSG(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_MATCH_MSG(3), ATF_REQUIRE_STREQ(3), ATF_REQUIRE_STREQ_MSG(3), ATF_REQUIRE_INTEQ(3), ATF_REQUIRE_INTEQ_MSG(3), ATF_REQUIRE_ERRNO(3), ATF_TC(3), ATF_TC_BODY(3), ATF_TC_BODY_NAME(3), ATF_TC_CLEANUP(3), ATF_TC_CLEANUP_NAME(3), ATF_TC_HEAD(3), ATF_TC_HEAD_NAME(3), ATF_TC_NAME(3), ATF_TC_WITH_CLEANUP(3), ATF_TC_WITHOUT_HEAD(3), ATF_TP_ADD_TC(3), ATF_TP_ADD_TCS(3), atf_tc_get_config_var(3), atf_tc_get_config_var_wd(3), atf_tc_get_config_var_as_bool(3), atf_tc_get_config_var_as_bool_wd(3), atf_tc_get_config_var_as_long(3), atf_tc_get_config_var_as_long_wd(3), atf_no_error(3), atf_tc_expect_death(3), atf_tc_expect_exit(3), atf_tc_expect_fail(3), atf_tc_expect_pass(3), atf_tc_expect_signal(3), atf_tc_expect_timeout(3), atf_tc_fail(3), atf_tc_fail_nonfatal(3), atf_tc_pass(3), atf_tc_require_kmod(3), atf_tc_require_prog(3), atf_tc_skip(3), atf_utils_cat_file(3), atf_utils_compare_file(3), atf_utils_copy_file(3), atf_utils_create_file(3), atf_utils_file_exists(3), atf_utils_fork(3), atf_utils_free_charpp(3), atf_utils_grep_file(3), atf_utils_grep_string(3), atf_utils_readline(3), atf_utils_redirect(3), atf_utils_wait(3)
- C API to write ATF-based test programs
- atf_add_test_case(3), atf_check(3), atf_check_equal(3), atf_check_not_equal(3), atf_config_get(3), atf_config_has(3), atf_expect_death(3), atf_expect_exit(3), atf_expect_fail(3), atf_expect_pass(3), atf_expect_signal(3), atf_expect_timeout(3), atf_fail(3), atf_get(3), atf_get_srcdir(3), atf_init_test_cases(3), atf_pass(3), atf_require_kmod(3), atf_require_prog(3), atf_set(3), atf_skip(3), atf_test_case(3)
- POSIX shell API to write ATF-based test programs
- auditctl(2)
- configure system audit parameters
- auditdistd.conf(5)
- configuration file for the auditdistd(8) daemon
- auditon(2)
- configure system audit parameters
- auto_master(5)
- autofs automounter configuration and map file format
- backlight(8)
- configure backlight hardware
- bhyve_config(5)
- bhyve configuration variables
- blacklistd.conf(5)
- configuration file format for blacklistd
- blocklistd.conf(5)
- configuration file format for blocklistd
- bluetooth-config(8)
- a script to manage config files for the bluetooth sub system
- bluetooth.device.conf(5)
- Bluetooth device configuration file
- boot.config(5)
- Configuration file for the boot blocks
- boot0cfg(8)
- boot manager installation/configuration utility
- bsdconfig(8)
- system configuration utility
- bsddialog(3), bsddialog_backtitle(3), bsddialog_backtitle_rf(3), bsddialog_calendar(3), bsddialog_clear(3), bsddialog_color(3), bsddialog_color_attrs(3), bsddialog_checklist(3), bsddialog_datebox(3), bsddialog_end(3), bsddialog_form(3), bsddialog_gauge(3), bsddialog_geterror(3), bsddialog_get_theme(3), bsddialog_hascolors(3), bsddialog_infobox(3), bsddialog_init(3), bsddialog_init_notheme(3), bsddialog_initconf(3), bsddialog_inmode(3), bsddialog_menu(3), bsddialog_mixedgauge(3), bsddialog_mixedlist(3), bsddialog_msgbox(3), bsddialog_pause(3), bsddialog_radiolist(3), bsddialog_rangebox(3), bsddialog_refresh(3), bsddialog_set_theme(3), bsddialog_set_default_theme(3), bsddialog_textbox(3), bsddialog_timebox(3), bsddialog_yesno(3)
- TUI dialogs
- ccdconfig(8)
- configuration utility for the concatenated disk driver
- config(5)
- kernel configuration file format
- config(8)
- build system configuration files
- config.lua(8)
- bootloader configuration module
- config_intrhook(9)
- schedule a function to be run after interrupts have been enabled, but before root is mounted
- confstr(3)
- get string-valued configurable variables
- cpuset(1)
- configure processor sets
- ctl.conf(5)
- CAM Target Layer / iSCSI target / NVMeoF controller daemon configuration file
- dcons_crom(4)
- Configuration ROM stub for dcons(4)
- ddb(8)
- configure DDB kernel debugger properties
- devcfg(4)
- Zynq PL device config interface
- devd.conf(5)
- configuration file format for devd(8)
- devfs.conf(5)
- boot-time devfs configuration information
- devfs.rules(5)
- devfs configuration information
- devinfo(8)
- print information about system device configuration
- dhclient(8)
- Dynamic Host Configuration Protocol (DHCP) client
- dhclient-script(8)
- DHCP client network configuration script
- dhclient.conf(5)
- DHCP client configuration file
- dhcp-options(5)
- Dynamic Host Configuration Protocol options
- dma.conf(5), dma(5)
- DragonFly Mail Agent
- dwarf_seterrarg(3), dwarf_seterrhand(3)
- configure error handling
- editrc(5)
- configuration file for editline library
- etherswitchcfg(8)
- configure a built-in Ethernet switch
- finger.conf(5)
- finger(1) alias configuration file
- freebsd-update.conf(5)
- configuration file for freebsd-update(8)
- getconf(1)
- retrieve standard configuration variables
- getnetconfig(3), setnetconfig(3), endnetconfig(3), getnetconfigent(3), freenetconfigent(3), nc_perror(3), nc_sperror(3)
- get network configuration database entry
- getnetpath(3), setnetpath(3), endnetpath(3)
- get /etc/netconfig entry corresponding to NETPATH component
- gettytab(5)
- terminal configuration data base
- hast.conf(5)
- configuration file for the hastd(8) daemon and the hastctl(8) utility
- hccontrol(8)
- Bluetooth HCI configuration utility
- hconf(4)
- MS Windows Precision Touchpad configuration driver
- hcsecd.conf(5)
- hcsecd(8) configuration file
- hostapd.conf(5)
- configuration file for hostapd(8) utility
- ifconfig(8)
- configure network interface parameters
- iflibdd(9)
- Device Dependent Configuration Functions
- iflibdi(9)
- Device Independent Configuration Functions
- inetd.conf(5), inetd(5)
- internet super-server
- iovctl(8)
- PCI SR-IOV configuration utility
- iovctl.conf(5)
- IOVCTL configuration file
- ip6addrctl(8)
- configure address selection policy for IPv6 and IPv4
- ipf(5), ipf.conf(5)
- IPFilter firewall rules file format
- ipmon(5), ipmon.conf(5)
- ipmon configuration file format
- ipnat(5), ipnat.conf(5)
- IPFilter NAT file format
- ippool(5), ippool.conf(5)
- IP Pool file format
- iscsi.conf(5)
- iSCSI initiator configuration file
- jail.conf(5)
- configuration file for system jails
- kbdcontrol(1)
- system video console keyboard control/configuration utility
- kdc.conf(5)
- Kerberos V5 KDC configuration file The kdc.conf file supplements %krb5.conf for programs which are typically only used on a KDC, such as the %krb5kdc and %kadmind daemons and the %kdb5_util program. Relations documented here may also be specified in krb5.conf; for the KDC programs mentioned, krb5.conf and kdc.conf will be merged into a single configuration profile. Normally, the kdc.conf file is found in the KDC state directory, @LOCALSTATEDIR@/krb5kdc. You can override the default location by setting the environment variable KRB5_KDC_PROFILE. Please note that you need to restart the KDC daemon for any configuration changes to take effect
- kldconfig(8)
- display or modify the kernel module search path
- krb5-config(1)
- tool for linking against MIT Kerberos libraries
- krb5.conf(5)
- Kerberos configuration file The krb5.conf file contains Kerberos configuration information, including the locations of KDCs and admin servers for the Kerberos realms of interest, defaults for the current realm and for Kerberos applications, and mappings of hostnames onto Kerberos realms. Normally, you should install your krb5.conf file in the directory /etc. You can override the default location by setting the environment variable KRB5_CONFIG. Multiple colon-separated filenames may be specified in KRB5_CONFIG; all files which are present will be read. Starting in release 1.14, directory names can also be specified in KRB5_CONFIG; all files within the directory whose names consist solely of alphanumeric characters, dashes, or underscores will be read
- kyua-config(1), kyua config(1)
- Inspects the values of the loaded configuration
- kyua.conf(5)
- Configuration file for the kyua tool
- l2control(8)
- L2CAP configuration utility
- ldconfig(8)
- configure the dynamic linker search path for shared libraries
- lib80211(3), lib80211_alloc_regdata(3), lib80211_free_regdata(3), lib80211_regdomain_readconfig(3), lib80211_regdomain_cleanup(3), lib80211_regdomain_findbysku(3), lib80211_regdomain_findbyname(3), lib80211_country_findbycc(3), lib80211_country_findbyname(3)
- manage net80211 configuration and regulatory database
- libmap.conf(5)
- configuration file for dynamic object dependency mapping
- libucl(3), ucl_parser_new(3), ucl_parser_register_macro(3), ucl_parser_register_variable(3), ucl_parser_add_chunk(3), ucl_parser_add_string(3), ucl_parser_add_file(3), ucl_parser_get_object(3), ucl_parser_get_error(3), ucl_parser_free(3), ucl_pubkey_add(3), ucl_parser_set_filevars(3)
- universal configuration library parser and utility functions
- loader.4th(8)
- loader.conf processing tools
- loader.conf(5)
- system bootstrap configuration information
- loader.conf.lua(5)
- system bootstrap Lua configuration information
- local-unbound-checkconf(8)
- Check Local-unbound configuration file for errors
- local-unbound.conf(5), unbound.conf(5)
- Local-unbound configuration file
- login.conf(5)
- login class capability database
- mac.conf(5)
- format of the MAC library configuration file
- mac_mls(4)
- Multi-Level Security confidentiality policy
- mailer.conf(5)
- configuration file for mailwrapper(8)
- mailwrapper(8)
- invoke appropriate MTA software based on configuration file
- make.conf(5)
- system build information
- malloc.conf(5), jemalloc(5)
- general purpose memory allocation functions
- man.conf(5)
- man(1) and manpath(1) configuration files
- mdconfig(8)
- create and control memory disks
- mdmfs(8), mount_mfs(8)
- configure and mount an in-memory file system using the md(4) driver or the tmpfs(4) filesystem
- mount.conf(5)
- root file system mount configuration file
- moused.conf(5)
- mouse daemon configuration file
- mptable(1)
- display MP configuration table
- netconfig(5)
- network configuration data base
- netlink(4), Netlink(4)
- Kernel network configuration protocol
- newsyslog.conf(5)
- newsyslog(8) configuration file
- nscd.conf(5)
- nscd configuration file
- nsmb.conf(5)
- configuration file for server message block (SMB1/CIFS) requests
- nsswitch.conf(5)
- name-service switch configuration file
- ntp.conf(5)
- Network Time Protocol (NTP) daemon configuration file format
- pam.conf(5)
- PAM policy file format
- pathconf(2), lpathconf(2), fpathconf(2)
- get configurable pathname variables
- pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_clear_pme(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_enable_pme(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_has_pm(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9)
- PCI bus interface
- pci_iov_schema(9), pci_iov_schema_alloc_node(9), pci_iov_schema_add_bool(9), pci_iov_schema_add_string(9), pci_iov_schema_add_uint8(9), pci_iov_schema_add_uint16(9), pci_iov_schema_add_uint32(9), pci_iov_schema_add_uint64(9), pci_iov_schema_add_unicast_mac(9)
- PCI SR-IOV config schema interface
- pciconf(8)
- diagnostic utility for the PCI bus
- periodic.conf(5)
- periodic job configuration information
- pf.conf(5)
- packet filter configuration file
- pmc_configure_logfile(3), pmc_flush_logfile(3), pmc_writelog(3), pmc_close_logfile(3)
- log file management
- pw.conf(5)
- format of the pw.conf configuration file
- pwm(8)
- configure PWM (Pulse Width Modulation) hardware
- pwmbus(9), PWMBUS_CHANNEL_CONFIG(9), PWMBUS_CHANNEL_COUNT(9), PWMBUS_CHANNEL_ENABLE(9), PWMBUS_CHANNEL_GET_CONFIG(9), PWMBUS_CHANNEL_GET_FLAGS(9), PWMBUS_CHANNEL_IS_ENABLED(9), PWMBUS_CHANNEL_SET_FLAGS(9), PWMBUS_GET_BUS(9)
- PWMBUS methods
- radius.conf(5)
- RADIUS client configuration file
- rc.conf(5)
- system configuration information
- rctl.conf(5)
- resource limits database defaults
- resolvconf(8)
- a framework for managing multiple DNS configurations
- resolvconf.conf(5)
- resolvconf configuration file
- resolver(5)
- resolver configuration file
- rrenumd.conf(5)
- configuration file for router renumbering daemon
- rtadvd.conf(5)
- config file for router advertisement daemon
- rtnetlink(4), RTNetlink(4)
- Network configuration-specific Netlink family
- src.conf(5)
- source build options
- ssh_config(5)
- OpenSSH client configuration file
- sshd_config(5)
- OpenSSH daemon configuration file
- sysconf(3)
- get configurable system variables
- sysctl.conf(5)
- kernel state defaults
- sysdecode_enum(3), sysdecode_acltype(3), sysdecode_atfd(3), sysdecode_extattrnamespace(3), sysdecode_fadvice(3), sysdecode_fcntl_cmd(3), sysdecode_getfsstat_mode(3), sysdecode_getrusage_who(3), sysdecode_idtype(3), sysdecode_ipproto(3), sysdecode_itimer(3), sysdecode_kldsym_cmd(3), sysdecode_kldunload_flags(3), sysdecode_lio_listio_mode(3), sysdecode_madvice(3), sysdecode_minherit_flags(3), sysdecode_msgctl_cmd(3), sysdecode_nfssvc_flags(3), sysdecode_pathconf_name(3), sysdecode_prio_which(3), sysdecode_procctl_cmd(3), sysdecode_ptrace_request(3), sysdecode_rlimit(3), sysdecode_rtprio_function(3), sysdecode_scheduler_policy(3), sysdecode_sctp_pr_policy(3), sysdecode_sctp_sinfo_flags(3), sysdecode_semctl_cmd(3), sysdecode_shmctl_cmd(3), sysdecode_shutdown_how(3), sysdecode_sigbus_code(3), sysdecode_sigchld_code(3), sysdecode_sigfpe_code(3), sysdecode_sigill_code(3), sysdecode_signal(3), sysdecode_sigprocmask_how(3), sysdecode_sigsegv_code(3), sysdecode_sigtrap_code(3), sysdecode_sockaddr_family(3), sysdecode_socketdomain(3), sysdecode_sockettype(3), sysdecode_sockopt_level(3), sysdecode_sysarch_number(3), sysdecode_umtx_op(3), sysdecode_vmresult(3), sysdecode_whence(3)
- lookup name of various enumerated values
- syslog.conf(5)
- syslogd(8) configuration file
- tacplus.conf(5)
- TACACS+ client configuration file
- tcpdchk(8)
- tcp wrapper configuration checker
- usbconfig(8)
- configure the USB subsystem
- vfsconf(9)
- vfs configuration information
- vidcontrol(1)
- system video console control and configuration utility
- wg(8)
- set and retrieve configuration of WireGuard interfaces
- wpa_supplicant.conf(5)
- configuration file for wpa_supplicant(8)
- ypldap.conf(5)
- LDAP YP map daemon configuration file
- zfs(8)
- configure ZFS datasets
- zpool(8)
- configure ZFS storage pools
- ASN1_generate_nconf(3), ASN1_generate_v3(3)
- ASN1 string generation functions
- CONF_get1_default_config_file(3), CONF_modules_load_file_ex(3), CONF_modules_load_file(3), CONF_modules_load(3)
- OpenSSL configuration functions
- CONF_modules_free(3), CONF_modules_finish(3), CONF_modules_unload(3)
- OpenSSL configuration cleanup functions
- NCONF_new_ex(3), NCONF_new(3), NCONF_free(3), NCONF_default(3), NCONF_load(3), NCONF_get0_libctx(3), NCONF_get_section(3), NCONF_get_section_names(3)
- functionality to Load and parse configuration files manually
- OPENSSL_INIT_new(3), OPENSSL_INIT_set_config_filename(3), OPENSSL_INIT_set_config_appname(3), OPENSSL_INIT_set_config_file_flags(3), OPENSSL_INIT_free(3), OPENSSL_init_crypto(3), OPENSSL_cleanup(3), OPENSSL_atexit(3), OPENSSL_thread_stop_ex(3), OPENSSL_thread_stop(3)
- OpenSSL initialisation and deinitialisation functions
- OPENSSL_config(3), OPENSSL_no_config(3)
- simple OpenSSL configuration functions
- OPENSSL_load_builtin_modules(3), ASN1_add_oid_module(3), ENGINE_add_conf_module(3)
- add standard configuration modules
- OSSL_CMP_CTX_new(3), OSSL_CMP_CTX_free(3), OSSL_CMP_CTX_reinit(3), OSSL_CMP_CTX_get0_libctx(3), OSSL_CMP_CTX_get0_propq(3), OSSL_CMP_CTX_set_option(3), OSSL_CMP_CTX_get_option(3), OSSL_CMP_CTX_set_log_cb(3), OSSL_CMP_CTX_set_log_verbosity(3), OSSL_CMP_CTX_print_errors(3), OSSL_CMP_CTX_set1_serverPath(3), OSSL_CMP_CTX_set1_server(3), OSSL_CMP_CTX_set_serverPort(3), OSSL_CMP_CTX_set1_proxy(3), OSSL_CMP_CTX_set1_no_proxy(3), OSSL_CMP_CTX_set_http_cb(3), OSSL_CMP_CTX_set_http_cb_arg(3), OSSL_CMP_CTX_get_http_cb_arg(3), OSSL_CMP_transfer_cb_t(3), OSSL_CMP_CTX_set_transfer_cb(3), OSSL_CMP_CTX_set_transfer_cb_arg(3), OSSL_CMP_CTX_get_transfer_cb_arg(3), OSSL_CMP_CTX_set1_srvCert(3), OSSL_CMP_CTX_set1_expected_sender(3), OSSL_CMP_CTX_set0_trusted(3), OSSL_CMP_CTX_set0_trustedStore(3), OSSL_CMP_CTX_get0_trusted(3), OSSL_CMP_CTX_get0_trustedStore(3), OSSL_CMP_CTX_set1_untrusted(3), OSSL_CMP_CTX_get0_untrusted(3), OSSL_CMP_CTX_set1_cert(3), OSSL_CMP_CTX_build_cert_chain(3), OSSL_CMP_CTX_set1_pkey(3), OSSL_CMP_CTX_set1_referenceValue(3), OSSL_CMP_CTX_set1_secretValue(3), OSSL_CMP_CTX_set1_recipient(3), OSSL_CMP_CTX_push0_geninfo_ITAV(3), OSSL_CMP_CTX_reset_geninfo_ITAVs(3), OSSL_CMP_CTX_get0_geninfo_ITAVs(3), OSSL_CMP_CTX_set1_extraCertsOut(3), OSSL_CMP_CTX_set0_newPkey(3), OSSL_CMP_CTX_get0_newPkey(3), OSSL_CMP_CTX_set1_issuer(3), OSSL_CMP_CTX_set1_serialNumber(3), OSSL_CMP_CTX_set1_subjectName(3), OSSL_CMP_CTX_push1_subjectAltName(3), OSSL_CMP_CTX_set0_reqExtensions(3), OSSL_CMP_CTX_reqExtensions_have_SAN(3), OSSL_CMP_CTX_push0_policy(3), OSSL_CMP_CTX_set1_oldCert(3), OSSL_CMP_CTX_set1_p10CSR(3), OSSL_CMP_CTX_push0_genm_ITAV(3), OSSL_CMP_certConf_cb_t(3), OSSL_CMP_certConf_cb(3), OSSL_CMP_CTX_set_certConf_cb(3), OSSL_CMP_CTX_set_certConf_cb_arg(3), OSSL_CMP_CTX_get_certConf_cb_arg(3), OSSL_CMP_CTX_get_status(3), OSSL_CMP_CTX_get0_statusString(3), OSSL_CMP_CTX_get_failInfoCode(3), OSSL_CMP_CTX_get0_validatedSrvCert(3), OSSL_CMP_CTX_get0_newCert(3), OSSL_CMP_CTX_get1_newChain(3), OSSL_CMP_CTX_get1_caPubs(3), OSSL_CMP_CTX_get1_extraCertsIn(3), OSSL_CMP_CTX_set1_transactionID(3), OSSL_CMP_CTX_set1_senderNonce(3)
- functions for managing the CMP client context data structure
- OSSL_CMP_SRV_process_request(3), OSSL_CMP_CTX_server_perform(3), OSSL_CMP_SRV_CTX_new(3), OSSL_CMP_SRV_CTX_free(3), OSSL_CMP_SRV_cert_request_cb_t(3), OSSL_CMP_SRV_rr_cb_t(3), OSSL_CMP_SRV_certConf_cb_t(3), OSSL_CMP_SRV_genm_cb_t(3), OSSL_CMP_SRV_error_cb_t(3), OSSL_CMP_SRV_pollReq_cb_t(3), OSSL_CMP_SRV_CTX_init(3), OSSL_CMP_SRV_delayed_delivery_cb_t(3), OSSL_CMP_SRV_clean_transaction_cb_t(3), OSSL_CMP_SRV_CTX_init_trans(3), OSSL_CMP_SRV_CTX_get0_cmp_ctx(3), OSSL_CMP_SRV_CTX_get0_custom_ctx(3), OSSL_CMP_SRV_CTX_set_send_unprotected_errors(3), OSSL_CMP_SRV_CTX_set_accept_unprotected(3), OSSL_CMP_SRV_CTX_set_accept_raverified(3), OSSL_CMP_SRV_CTX_set_grant_implicit_confirm(3)
- generic functions to set up and control a CMP server
- OSSL_LIB_CTX(3), OSSL_LIB_CTX_get_data(3), OSSL_LIB_CTX_new(3), OSSL_LIB_CTX_new_from_dispatch(3), OSSL_LIB_CTX_new_child(3), OSSL_LIB_CTX_free(3), OSSL_LIB_CTX_load_config(3), OSSL_LIB_CTX_get0_global_default(3), OSSL_LIB_CTX_set0_default(3)
- OpenSSL library context
- OSSL_LIB_CTX_set_conf_diagnostics(3), OSSL_LIB_CTX_get_conf_diagnostics(3)
- Set and get configuration diagnostics
- OSSL_PROVIDER_set_default_search_path(3), OSSL_PROVIDER_get0_default_search_path(3), OSSL_PROVIDER(3), OSSL_PROVIDER_load(3), OSSL_PROVIDER_try_load(3), OSSL_PROVIDER_unload(3), OSSL_PROVIDER_load_ex(3), OSSL_PROVIDER_try_load_ex(3), OSSL_PROVIDER_available(3), OSSL_PROVIDER_do_all(3), OSSL_PROVIDER_gettable_params(3), OSSL_PROVIDER_get_params(3), OSSL_PROVIDER_query_operation(3), OSSL_PROVIDER_unquery_operation(3), OSSL_PROVIDER_get0_provider_ctx(3), OSSL_PROVIDER_get0_dispatch(3), OSSL_PROVIDER_add_builtin(3), OSSL_PROVIDER_get0_name(3), OSSL_PROVIDER_get_capabilities(3), OSSL_PROVIDER_add_conf_parameter(3), OSSL_PROVIDER_get_conf_parameters(3), OSSL_PROVIDER_conf_get_bool(3), OSSL_PROVIDER_self_test(3)
- provider routines
- SSL_CONF_CTX_finish(3), SSL_CONF_CTX_set_ssl_ctx(3), SSL_CONF_CTX_set_ssl(3)
- set context to configure
- SSL_CONF_CTX_new(3), SSL_CONF_CTX_free(3)
- SSL configuration allocation functions
- SSL_CONF_CTX_set1_prefix(3)
- Set configuration context command prefix
- SSL_CONF_CTX_set_flags(3), SSL_CONF_CTX_clear_flags(3)
- Set or clear SSL configuration context flags
- SSL_CONF_cmd_argv(3)
- SSL configuration command line processing
- SSL_CONF_cmd_value_type(3), SSL_CONF_cmd(3)
- send configuration command
- SSL_CTX_config(3), SSL_config(3)
- configure SSL_CTX or SSL structure
- SSL_CTX_set_tlsext_use_srtp(3), SSL_set_tlsext_use_srtp(3), SSL_get_srtp_profiles(3), SSL_get_selected_srtp_profile(3)
- Configure and query SRTP support
- SSL_get_value_uint(3), SSL_set_value_uint(3), SSL_get_generic_value_uint(3), SSL_set_generic_value_uint(3), SSL_get_feature_request_uint(3), SSL_set_feature_request_uint(3), SSL_get_feature_peer_request_uint(3), SSL_get_feature_negotiated_uint(3), SSL_get_quic_stream_bidi_local_avail(3), SSL_get_quic_stream_bidi_remote_avail(3), SSL_get_quic_stream_uni_local_avail(3), SSL_get_quic_stream_uni_remote_avail(3), SSL_VALUE_CLASS_GENERIC(3), SSL_VALUE_CLASS_FEATURE_REQUEST(3), SSL_VALUE_CLASS_FEATURE_PEER_REQUEST(3), SSL_VALUE_CLASS_FEATURE_NEGOTIATED(3), SSL_VALUE_QUIC_STREAM_BIDI_LOCAL_AVAIL(3), SSL_VALUE_QUIC_STREAM_BIDI_REMOTE_AVAIL(3), SSL_VALUE_QUIC_STREAM_UNI_LOCAL_AVAIL(3), SSL_VALUE_QUIC_STREAM_UNI_REMOTE_AVAIL(3), SSL_VALUE_QUIC_IDLE_TIMEOUT(3), SSL_VALUE_EVENT_HANDLING_MODE(3), SSL_VALUE_EVENT_HANDLING_MODE_INHERIT(3), SSL_VALUE_EVENT_HANDLING_MODE_EXPLICIT(3), SSL_VALUE_EVENT_HANDLING_MODE_IMPLICIT(3), SSL_get_event_handling_mode(3), SSL_set_event_handling_mode(3), SSL_VALUE_STREAM_WRITE_BUF_SIZE(3), SSL_get_stream_write_buf_size(3), SSL_VALUE_STREAM_WRITE_BUF_USED(3), SSL_get_stream_write_buf_used(3), SSL_VALUE_STREAM_WRITE_BUF_AVAIL(3), SSL_get_stream_write_buf_avail(3)
- manage negotiable features and configuration values for an SSL object
- SSL_set_blocking_mode(3), SSL_get_blocking_mode(3)
- configure blocking mode for a QUIC SSL object
- X509_ACERT_add_attr_nconf(3)
- Add attributes to X509_ACERT from configuration section
- fips_config(5)
- OpenSSL FIPS configuration
- openssl-fipsinstall(1)
- perform FIPS configuration installation
- x509v3_config(5)
- X509 V3 certificate extension configuration format
- /cowthink(1)
- configurable speaking/thinking cow (and a bit more)
- 00-upstream-settings(5)
- dconf configuration file
- 3proxy.cfg(3)
- 3proxy configuration file
- AG_Config(3)
- agar configuration interface
- ALLEGRO_CHANNEL_CONF(3)
- Allegro 5 API
- ALLEGRO_CONFIG(3)
- Allegro 5 API
- ALLEGRO_CONFIG_ENTRY(3)
- Allegro 5 API
- ALLEGRO_CONFIG_SECTION(3)
- Allegro 5 API
- ALTER_SYSTEM(7)
- change a server configuration parameter
- ALTER_TEXT_SEARCH_CONFIGURATION(7)
- change the definition of a text search configuration
- ASN1_generate_nconf(3), ASN1_generate_v3(3)
- ASN1 generation functions
- ASN1_generate_nconf(3ossl), ASN1_generate_v3(3ossl)
- ASN1 string generation functions
- AnimateTypes(1x)
- animation modes used in the Animate module's config
- Apache::TS::Config::Records(3)
- Manage the Apache Traffic Server records.config file
- Base(1x)
- essential AfterStep configuration options
- CONF_get1_default_config_file(3ossl), CONF_modules_load_file_ex(3ossl), CONF_modules_load_file(3ossl), CONF_modules_load(3ossl)
- OpenSSL configuration functions
- CONF_modules_free(3), CONF_modules_finish(3), CONF_modules_unload(3)
- OpenSSL configuration cleanup functions
- CONF_modules_free(3ossl), CONF_modules_finish(3ossl), CONF_modules_unload(3ossl)
- OpenSSL configuration cleanup functions
- CONF_modules_load_file(3), CONF_modules_load(3)
- OpenSSL configuration functions
- CREATE_TEXT_SEARCH_CONFIGURATION(7)
- define a new text search configuration
- CURLOPT_ECH(3)
- configuration for Encrypted Client Hello
- ColorScheme(1x)
- defines color values for standard set of internal color names, to be used in other configuration files
- Config(3o)
- System configuration
- ControlPanel-17(1), ControlPanel(1)
- Configure desktop settings for FOX Toolkit applications
- Cutelyst4Qt6CSRFProtection(5)
- Configuration of the CSRFProtection Plugin for the Cutelyst Web Framework
- Cutelyst4Qt6LangSelect(5)
- Configuration of the LangSelect Plugin for the Cutelyst Web Framework
- Cutelyst4Qt6Session(5)
- Configuration of the Session Plugin for the Cutelyst Web Framework
- DROP_TEXT_SEARCH_CONFIGURATION(7)
- remove a text search configuration
- Dpkg::Conf(3perl)
- parse dpkg configuration files
- EVP_CIPHER_CTX_set_flags(3), EVP_CIPHER_CTX_clear_flags(3), EVP_CIPHER_CTX_test_flags(3), EVP_CIPHER_CTX_rand_key(3), EVP_CIPHER_param_to_asn1(3), EVP_CIPHER_asn1_to_param(3), EVP_CIPHER_CTX_get_app_data(3), EVP_CIPHER_CTX_set_app_data(3)
- unusual EVP cipher context configuration
- ExperimentFile(3), exp_read_info (3), exp_fread_info (3), exp_create_info (3), exp_destroy_info (3), exp_create_range (3), exp_extract_range (3), exp_get_feature_index (3), exp_get_int (3), exp_get_rng (3), exp_get_str (3), exp_put_int (3), exp_put_rng (3), exp_put_str (3), exp_print_line (3), exp_print_seq (3), exp_print_file (3), opos2str (3), str2opos (3), conf2str (3), str2conf(3)
- Manipulations of the Experiment File format "exp_read_info()" "" "exp_read_info()" "exp_fread_info()" "" "exp_fread_info()" "exp_create_info()" "" "exp_create_info()" "exp_destroy_info()" "" "exp_destroy_info()" "exp_create_range()" "" "exp_create_range()" "exp_extract_range()" "" "exp_extract_range()" "exp_get_feature_index()" "" "exp_get_feature_index()" "exp_get_int()" "" "exp_get_int()" "exp_get_rng()" "" "exp_get_rng()" "exp_get_str()" "" "exp_get_str()" "exp_put_int()" "" "exp_put_int()" "exp_put_rng()" "" "exp_put_rng()" "exp_put_str()" "" "exp_put_str()" "exp_print_line()" "" "exp_print_line()" "exp_print_seq()" "" "exp_print_seq()" "exp_print_file()" "" "exp_print_file()" "opos2str()" "" "opos2str()" "str2opos()" "" "str2opos()" "conf2str()" "" "conf2str()" "str2conf()" "" "str2conf()"
- FcConfigAppFontAddDir(3)
- Add fonts from directory to font database
- FcConfigAppFontAddFile(3)
- Add font file to font database
- FcConfigAppFontClear(3)
- Remove all app fonts from font database
- FcConfigBuildFonts(3)
- Build font database
- FcConfigCreate(3)
- Create a configuration
- FcConfigDestroy(3)
- Destroy a configuration
- FcConfigEnableHome(3)
- controls use of the home directory
- FcConfigFileInfoIterGet(3)
- Obtain the configuration file information
- FcConfigFileInfoIterInit(3)
- Initialize the iterator
- FcConfigFileInfoIterNext(3)
- Set the iterator to point to the next list
- FcConfigFilename(3)
- Find a config file
- FcConfigGetBlanks(3)
- Get config blanks
- FcConfigGetCache(3)
- DEPRECATED used to return per-user cache filename
- FcConfigGetCacheDirs(3)
- return the list of directories searched for cache files
- FcConfigGetConfigDirs(3)
- Get config directories
- FcConfigGetConfigFiles(3)
- Get config files
- FcConfigGetCurrent(3)
- Return current configuration
- FcConfigGetFilename(3)
- Find a config file
- FcConfigGetFontDirs(3)
- Get font directories
- FcConfigGetFonts(3)
- Get config font set
- FcConfigGetRescanInterval(3)
- Get config rescan interval
- FcConfigGetSysRoot(3)
- Obtain the system root directory
- FcConfigHome(3)
- return the current home directory
- FcConfigParseAndLoad(3)
- load a configuration file
- FcConfigParseAndLoadFromMemory(3)
- load a configuration from memory
- FcConfigReference(3)
- Increment config reference count
- FcConfigSetCurrent(3)
- Set configuration as default
- FcConfigSetRescanInterval(3)
- Set config rescan interval
- FcConfigSetSysRoot(3)
- Set the system root directory
- FcConfigSubstitute(3)
- Execute substitutions
- FcConfigSubstituteWithPat(3)
- Execute substitutions
- FcConfigUptoDate(3)
- Check timestamps on config files
- FcFini(3)
- finalize fontconfig library
- FcInit(3)
- initialize fontconfig library
- FcInitBringUptoDate(3)
- reload configuration files if needed
- FcInitLoadConfig(3)
- load configuration
- FcInitLoadConfigAndFonts(3)
- load configuration and font data
- FcWeightFromOpenType(3)
- Convert from OpenType weight values to fontconfig ones
- FcWeightFromOpenTypeDouble(3)
- Convert from OpenType weight values to fontconfig ones
- FcWeightToOpenType(3)
- Convert from fontconfig weight values to OpenType ones
- FcWeightToOpenTypeDouble(3)
- Convert from fontconfig weight values to OpenType ones
- Feel(1x)
- AfterStep feel configuration
- FeelWindowBox(1x)
- defines placement policy for certain type of windows, based on desk, window attributes, window size, etc. Useful for xinerama configurations, where windows should not be placed in between screens
- GeoIP.conf(5)
- Configuration file for geoipupdate
- GraphicsMagick++-config(1)
- get information about the installed version of Magick++
- GraphicsMagick-config(1)
- get information about the installed version of GraphicsMagick
- GraphicsMagickWand-config(1)
- get information about the installed version of GraphicsMagick
- INN::Config(3pm)
- Export all the variables an INN Perl script might need
- Magick++-config(1)
- get information about the installed version of Magick++
- Magick-config(1)
- get information about the installed version of ImageMagick
- MagickCore-config(1)
- get information about the installed version of ImageMagick
- MagickWand-config(1)
- get information about the installed version of the Magick Wand
- ModuleDtmfRepeater.conf(5)
- Configuration file for the SvxLink server DTMF Repeater module
- ModuleEchoLink.conf(5)
- Configuration file for the SvxLink server EchoLink module
- ModuleFrn.conf(5)
- Configuration file for the SvxLink server Free Radio Network (FRN) module
- ModuleHelp.conf(5)
- Configuration file for the SvxLink server Help module
- ModuleParrot.conf(5)
- Configuration file for the SvxLink server Parrot module
- ModulePropagationMonitor.conf(5)
- Configuration file for the SvxLink server PropagationMonitor module
- ModuleSelCallEnc.conf(5)
- Configuration file for the SvxLink server SelCallEnc module
- ModuleTclVoiceMail.conf(5)
- Configuration file for the SvxLink server TclVoiceMail module
- ModuleTrx.conf(5)
- Configuration file for the SvxLink transceiver control module
- Munin::Common::Config(3)
- Abstract base class for common config code
- Munin::Master::Config(3)
- Holds the master configuration
- Munin::Node::Config(3)
- Singleton node configuration container. Reads configuration files
- Munin::Node::Configure::Debug(3)
- Prints a debug message in the standard munin-node-configure format
- Munin::Node::Configure::History(3)
- Filtering plugins based on the version of Munin they were first distributed with
- Munin::Node::Configure::HostEnumeration(3)
- Takes a list of hosts, and returns the corresponding IPs in dotted-quad form
- Munin::Node::Configure::Plugin(3)
- Class representing a plugin, along with its installed and suggested services
- Munin::Node::Configure::PluginList(3)
- Loading and listing a collection of plugins
- Munin::Node::SNMPConfig(3)
- Subroutines providing munin-node-configures SNMP scanning capabilities
- NCONF_new_ex(3ossl), NCONF_new(3ossl), NCONF_free(3ossl), NCONF_default(3ossl), NCONF_load(3ossl), NCONF_get0_libctx(3ossl), NCONF_get_section(3ossl), NCONF_get_section_names(3ossl)
- functionality to Load and parse configuration files manually
- OPENSSL_INIT_new(3), OPENSSL_INIT_set_config_filename(3), OPENSSL_INIT_set_config_appname(3), OPENSSL_INIT_set_config_file_flags(3), OPENSSL_INIT_free(3), OPENSSL_init_crypto(3), OPENSSL_cleanup(3), OPENSSL_atexit(3), OPENSSL_thread_stop(3)
- OpenSSL initialisation and deinitialisation functions
- OPENSSL_INIT_new(3ossl), OPENSSL_INIT_set_config_filename(3ossl), OPENSSL_INIT_set_config_appname(3ossl), OPENSSL_INIT_set_config_file_flags(3ossl), OPENSSL_INIT_free(3ossl), OPENSSL_init_crypto(3ossl), OPENSSL_cleanup(3ossl), OPENSSL_atexit(3ossl), OPENSSL_thread_stop_ex(3ossl), OPENSSL_thread_stop(3ossl)
- OpenSSL initialisation and deinitialisation functions
- OPENSSL_config(3), OPENSSL_no_config(3)
- simple OpenSSL configuration functions
- OPENSSL_config(3ossl), OPENSSL_no_config(3ossl)
- simple OpenSSL configuration functions
- OPENSSL_load_builtin_modules(3), ASN1_add_oid_module(3), ENGINE_add_conf_module(3)
- add standard configuration modules
- OPENSSL_load_builtin_modules(3ossl), ASN1_add_oid_module(3ossl), ENGINE_add_conf_module(3ossl)
- add standard configuration modules
- OSSL_CMP_CTX_new(3ossl), OSSL_CMP_CTX_free(3ossl), OSSL_CMP_CTX_reinit(3ossl), OSSL_CMP_CTX_get0_libctx(3ossl), OSSL_CMP_CTX_get0_propq(3ossl), OSSL_CMP_CTX_set_option(3ossl), OSSL_CMP_CTX_get_option(3ossl), OSSL_CMP_CTX_set_log_cb(3ossl), OSSL_CMP_CTX_set_log_verbosity(3ossl), OSSL_CMP_CTX_print_errors(3ossl), OSSL_CMP_CTX_set1_serverPath(3ossl), OSSL_CMP_CTX_set1_server(3ossl), OSSL_CMP_CTX_set_serverPort(3ossl), OSSL_CMP_CTX_set1_proxy(3ossl), OSSL_CMP_CTX_set1_no_proxy(3ossl), OSSL_CMP_CTX_set_http_cb(3ossl), OSSL_CMP_CTX_set_http_cb_arg(3ossl), OSSL_CMP_CTX_get_http_cb_arg(3ossl), OSSL_CMP_transfer_cb_t(3ossl), OSSL_CMP_CTX_set_transfer_cb(3ossl), OSSL_CMP_CTX_set_transfer_cb_arg(3ossl), OSSL_CMP_CTX_get_transfer_cb_arg(3ossl), OSSL_CMP_CTX_set1_srvCert(3ossl), OSSL_CMP_CTX_set1_expected_sender(3ossl), OSSL_CMP_CTX_set0_trusted(3ossl), OSSL_CMP_CTX_set0_trustedStore(3ossl), OSSL_CMP_CTX_get0_trusted(3ossl), OSSL_CMP_CTX_get0_trustedStore(3ossl), OSSL_CMP_CTX_set1_untrusted(3ossl), OSSL_CMP_CTX_get0_untrusted(3ossl), OSSL_CMP_CTX_set1_cert(3ossl), OSSL_CMP_CTX_build_cert_chain(3ossl), OSSL_CMP_CTX_set1_pkey(3ossl), OSSL_CMP_CTX_set1_referenceValue(3ossl), OSSL_CMP_CTX_set1_secretValue(3ossl), OSSL_CMP_CTX_set1_recipient(3ossl), OSSL_CMP_CTX_push0_geninfo_ITAV(3ossl), OSSL_CMP_CTX_reset_geninfo_ITAVs(3ossl), OSSL_CMP_CTX_get0_geninfo_ITAVs(3ossl), OSSL_CMP_CTX_set1_extraCertsOut(3ossl), OSSL_CMP_CTX_set0_newPkey(3ossl), OSSL_CMP_CTX_get0_newPkey(3ossl), OSSL_CMP_CTX_set1_issuer(3ossl), OSSL_CMP_CTX_set1_serialNumber(3ossl), OSSL_CMP_CTX_set1_subjectName(3ossl), OSSL_CMP_CTX_push1_subjectAltName(3ossl), OSSL_CMP_CTX_set0_reqExtensions(3ossl), OSSL_CMP_CTX_reqExtensions_have_SAN(3ossl), OSSL_CMP_CTX_push0_policy(3ossl), OSSL_CMP_CTX_set1_oldCert(3ossl), OSSL_CMP_CTX_set1_p10CSR(3ossl), OSSL_CMP_CTX_push0_genm_ITAV(3ossl), OSSL_CMP_certConf_cb_t(3ossl), OSSL_CMP_certConf_cb(3ossl), OSSL_CMP_CTX_set_certConf_cb(3ossl), OSSL_CMP_CTX_set_certConf_cb_arg(3ossl), OSSL_CMP_CTX_get_certConf_cb_arg(3ossl), OSSL_CMP_CTX_get_status(3ossl), OSSL_CMP_CTX_get0_statusString(3ossl), OSSL_CMP_CTX_get_failInfoCode(3ossl), OSSL_CMP_CTX_get0_validatedSrvCert(3ossl), OSSL_CMP_CTX_get0_newCert(3ossl), OSSL_CMP_CTX_get1_newChain(3ossl), OSSL_CMP_CTX_get1_caPubs(3ossl), OSSL_CMP_CTX_get1_extraCertsIn(3ossl), OSSL_CMP_CTX_set1_transactionID(3ossl), OSSL_CMP_CTX_set1_senderNonce(3ossl)
- functions for managing the CMP client context data structure
- OSSL_CMP_SRV_process_request(3ossl), OSSL_CMP_CTX_server_perform(3ossl), OSSL_CMP_SRV_CTX_new(3ossl), OSSL_CMP_SRV_CTX_free(3ossl), OSSL_CMP_SRV_cert_request_cb_t(3ossl), OSSL_CMP_SRV_rr_cb_t(3ossl), OSSL_CMP_SRV_certConf_cb_t(3ossl), OSSL_CMP_SRV_genm_cb_t(3ossl), OSSL_CMP_SRV_error_cb_t(3ossl), OSSL_CMP_SRV_pollReq_cb_t(3ossl), OSSL_CMP_SRV_CTX_init(3ossl), OSSL_CMP_SRV_delayed_delivery_cb_t(3ossl), OSSL_CMP_SRV_clean_transaction_cb_t(3ossl), OSSL_CMP_SRV_CTX_init_trans(3ossl), OSSL_CMP_SRV_CTX_get0_cmp_ctx(3ossl), OSSL_CMP_SRV_CTX_get0_custom_ctx(3ossl), OSSL_CMP_SRV_CTX_set_send_unprotected_errors(3ossl), OSSL_CMP_SRV_CTX_set_accept_unprotected(3ossl), OSSL_CMP_SRV_CTX_set_accept_raverified(3ossl), OSSL_CMP_SRV_CTX_set_grant_implicit_confirm(3ossl)
- generic functions to set up and control a CMP server
- OSSL_LIB_CTX(3ossl), OSSL_LIB_CTX_get_data(3ossl), OSSL_LIB_CTX_new(3ossl), OSSL_LIB_CTX_new_from_dispatch(3ossl), OSSL_LIB_CTX_new_child(3ossl), OSSL_LIB_CTX_free(3ossl), OSSL_LIB_CTX_load_config(3ossl), OSSL_LIB_CTX_get0_global_default(3ossl), OSSL_LIB_CTX_set0_default(3ossl)
- OpenSSL library context
- OSSL_LIB_CTX_set_conf_diagnostics(3ossl), OSSL_LIB_CTX_get_conf_diagnostics(3ossl)
- Set and get configuration diagnostics
- OSSL_PROVIDER_set_default_search_path(3ossl), OSSL_PROVIDER_get0_default_search_path(3ossl), OSSL_PROVIDER(3ossl), OSSL_PROVIDER_load(3ossl), OSSL_PROVIDER_try_load(3ossl), OSSL_PROVIDER_unload(3ossl), OSSL_PROVIDER_load_ex(3ossl), OSSL_PROVIDER_try_load_ex(3ossl), OSSL_PROVIDER_available(3ossl), OSSL_PROVIDER_do_all(3ossl), OSSL_PROVIDER_gettable_params(3ossl), OSSL_PROVIDER_get_params(3ossl), OSSL_PROVIDER_query_operation(3ossl), OSSL_PROVIDER_unquery_operation(3ossl), OSSL_PROVIDER_get0_provider_ctx(3ossl), OSSL_PROVIDER_get0_dispatch(3ossl), OSSL_PROVIDER_add_builtin(3ossl), OSSL_PROVIDER_get0_name(3ossl), OSSL_PROVIDER_get_capabilities(3ossl), OSSL_PROVIDER_add_conf_parameter(3ossl), OSSL_PROVIDER_get_conf_parameters(3ossl), OSSL_PROVIDER_conf_get_bool(3ossl), OSSL_PROVIDER_self_test(3ossl)
- provider routines
- SSL_CONF_CTX_finish(3ossl), SSL_CONF_CTX_set_ssl_ctx(3ossl), SSL_CONF_CTX_set_ssl(3ossl)
- set context to configure
- SSL_CONF_CTX_new(3), SSL_CONF_CTX_free(3)
- SSL configuration allocation functions
- SSL_CONF_CTX_new(3ossl), SSL_CONF_CTX_free(3ossl)
- SSL configuration allocation functions
- SSL_CONF_CTX_set1_prefix(3)
- Set configuration context command prefix
- SSL_CONF_CTX_set1_prefix(3ossl)
- Set configuration context command prefix
- SSL_CONF_CTX_set_flags(3), SSL_CONF_CTX_clear_flags(3)
- Set or clear SSL configuration context flags
- SSL_CONF_CTX_set_flags(3ossl), SSL_CONF_CTX_clear_flags(3ossl)
- Set or clear SSL configuration context flags
- SSL_CONF_CTX_set_ssl_ctx(3), SSL_CONF_CTX_set_ssl(3)
- set context to configure
- SSL_CONF_cmd_argv(3)
- SSL configuration command line processing
- SSL_CONF_cmd_argv(3ossl)
- SSL configuration command line processing
- SSL_CONF_cmd_value_type(3), SSL_CONF_cmd(3)
- send configuration command
- SSL_CONF_cmd_value_type(3ossl), SSL_CONF_cmd(3ossl)
- send configuration command
- SSL_CTX_config(3), SSL_config(3)
- configure SSL_CTX or SSL structure
- SSL_CTX_config(3ossl), SSL_config(3ossl)
- configure SSL_CTX or SSL structure
- SSL_CTX_set_tlsext_use_srtp(3), SSL_set_tlsext_use_srtp(3), SSL_get_srtp_profiles(3), SSL_get_selected_srtp_profile(3)
- Configure and query SRTP support
- SSL_CTX_set_tlsext_use_srtp(3ossl), SSL_set_tlsext_use_srtp(3ossl), SSL_get_srtp_profiles(3ossl), SSL_get_selected_srtp_profile(3ossl)
- Configure and query SRTP support
- SSL_get_value_uint(3ossl), SSL_set_value_uint(3ossl), SSL_get_generic_value_uint(3ossl), SSL_set_generic_value_uint(3ossl), SSL_get_feature_request_uint(3ossl), SSL_set_feature_request_uint(3ossl), SSL_get_feature_peer_request_uint(3ossl), SSL_get_feature_negotiated_uint(3ossl), SSL_get_quic_stream_bidi_local_avail(3ossl), SSL_get_quic_stream_bidi_remote_avail(3ossl), SSL_get_quic_stream_uni_local_avail(3ossl), SSL_get_quic_stream_uni_remote_avail(3ossl), SSL_VALUE_CLASS_GENERIC(3ossl), SSL_VALUE_CLASS_FEATURE_REQUEST(3ossl), SSL_VALUE_CLASS_FEATURE_PEER_REQUEST(3ossl), SSL_VALUE_CLASS_FEATURE_NEGOTIATED(3ossl), SSL_VALUE_QUIC_STREAM_BIDI_LOCAL_AVAIL(3ossl), SSL_VALUE_QUIC_STREAM_BIDI_REMOTE_AVAIL(3ossl), SSL_VALUE_QUIC_STREAM_UNI_LOCAL_AVAIL(3ossl), SSL_VALUE_QUIC_STREAM_UNI_REMOTE_AVAIL(3ossl), SSL_VALUE_QUIC_IDLE_TIMEOUT(3ossl), SSL_VALUE_EVENT_HANDLING_MODE(3ossl), SSL_VALUE_EVENT_HANDLING_MODE_INHERIT(3ossl), SSL_VALUE_EVENT_HANDLING_MODE_EXPLICIT(3ossl), SSL_VALUE_EVENT_HANDLING_MODE_IMPLICIT(3ossl), SSL_get_event_handling_mode(3ossl), SSL_set_event_handling_mode(3ossl), SSL_VALUE_STREAM_WRITE_BUF_SIZE(3ossl), SSL_get_stream_write_buf_size(3ossl), SSL_VALUE_STREAM_WRITE_BUF_USED(3ossl), SSL_get_stream_write_buf_used(3ossl), SSL_VALUE_STREAM_WRITE_BUF_AVAIL(3ossl), SSL_get_stream_write_buf_avail(3ossl)
- manage negotiable features and configuration values for an SSL object
- SSL_set_blocking_mode(3ossl), SSL_get_blocking_mode(3ossl)
- configure blocking mode for a QUIC SSL object
- Sympa::ConfDef(3Sympa)
- Definition of site and robot configuration parameters
- Sympa::Config(3Sympa)
- List configuration
- Sympa::Config::Schema(3Sympa)
- Definition of configuration parameters
- Sympa::List::Config(3Sympa)
- List configuration
- Sympa::ListDef(3Sympa)
- Definition of list configuration parameters
- Sympa::ListOpt(3Sympa)
- Definition of list configuration parameter values
- Sympa::Request::Handler::confirm(3Sympa)
- confirm request handler
- Sympa::Spindle::ProcessAuth(3Sympa)
- Workflow of request confirmation
- Sympa::Spindle::ProcessHeld(3Sympa)
- Workflow of message confirmation
- Sympa::Spindle::ToHeld(3Sympa)
- Process to store messages into held spool to wait for confirmation
- Sympa::Spool::Held(3Sympa)
- Spool for held messages waiting for confirmation
- Tcl_RegisterConfig.tcl86(3), Tcl_RegisterConfig(3)
- procedures to register embedded configuration information
- Tcl_RegisterConfig.tcl90(3), Tcl_RegisterConfig(3)
- procedures to register embedded configuration information
- Tk_ChangeWindowAttributes.tk86(3), Tk_ConfigureWindow(3), Tk_MoveWindow(3), Tk_ResizeWindow(3), Tk_MoveResizeWindow(3), Tk_SetWindowBorderWidth(3), Tk_ChangeWindowAttributes(3), Tk_SetWindowBackground(3), Tk_SetWindowBackgroundPixmap(3), Tk_SetWindowBorder(3), Tk_SetWindowBorderPixmap(3), Tk_SetWindowColormap(3), Tk_DefineCursor(3), Tk_UndefineCursor(3)
- change window configuration or attributes
- Tk_ConfigureInfo.tk86(3), Tk_ConfigureWidget(3), Tk_ConfigureInfo(3), Tk_ConfigureValue(3), Tk_FreeOptions(3)
- process configuration options for widgets
- Tk_CreateOptionTable.tk86(3), Tk_CreateOptionTable(3), Tk_DeleteOptionTable(3), Tk_InitOptions(3), Tk_SetOptions(3), Tk_FreeSavedOptions(3), Tk_RestoreSavedOptions(3), Tk_GetOptionValue(3), Tk_GetOptionInfo(3), Tk_FreeConfigOptions(3), Tk_Offset(3)
- process configuration options
- Tspi_Data_Unseal(3)
- dencrypt data encrypted by Tspi_Data_Seal() only if it was encrypted on the same platform and under the current configuration
- WPrefs(1)
- Window Maker configuration tool
- Wand-config(1)
- get information about the installed version of the Magick Wand
- X509V3_parse_list(3), X509V3_conf_free(3)
- create and destroy CONF_VALUE objects
- X509_ACERT_add_attr_nconf(3ossl)
- Add attributes to X509_ACERT from configuration section
- XConfigureEvent(3)
- ConfigureNotify event structure
- XConfigureRequestEvent(3)
- ConfigureRequest event structure
- XConfigureWindow(3), XMoveWindow(3), XResizeWindow(3), XMoveResizeWindow(3), XSetWindowBorderWidth(3), XWindowChanges(3)
- configure windows and window changes structure
- XIconifyWindow(3), XWithdrawWindow(3), XReconfigureWMWindow(3)
- manipulate top-level windows
- XSupportsLocale(3), XSetLocaleModifiers(3)
- determine locale support and configure locale modifiers
- XmDropSiteConfigureStackingOrder(3)
- A Drag and Drop function that reorders a stack of widgets that are registered drop sites "XmDropSiteConfigureStack%ingOrder" "Drag and Drop functions" "XmDropSiteConfigureStack%ingOrder"
- XtConfigureWidget(3), XtMoveWidget(3), XtResizeWidget(3)
- move and resize widgets
- abookrc(5), $HOME/.abook/abookrc(5)
- configuration file for abook address book program
- acct_gather.conf(5)
- Slurm configuration file for the acct_gather plugins
- aclocal(1)
- Generate aclocal.m4 by scanning configure.ac
- acme.conf(5)
- lfacme global configuration file
- acmed.toml(5)
- ACMEd configuration file
- adacurses-config(1)
- helper script for AdaCurses libraries
- aerc-accounts(5)
- account configuration file format for aerc(1)
- aerc-binds(5)
- key bindings configuration file format for aerc(1)
- aerc-config(5)
- configuration file format for aerc(1)
- aerc-imap(5)
- IMAP configuration for aerc(1)
- aerc-jmap(5)
- JMAP configuration for aerc(1)
- aerc-maildir(5)
- maildir configuration for aerc(1)
- aerc-notmuch(5)
- notmuch configuration for aerc(1)
- aerc-sendmail(5)
- sendmail configuration for aerc(1)
- aerc-smtp(5)
- SMTP configuration for aerc(1)
- aide.conf(5)
- The configuration file for Advanced Intrusion Detection Environment
- al_add_config_comment(3)
- Allegro 5 API
- al_add_config_section(3)
- Allegro 5 API
- al_create_config(3)
- Allegro 5 API
- al_destroy_config(3)
- Allegro 5 API
- al_get_config_value(3)
- Allegro 5 API
- al_get_first_config_entry(3)
- Allegro 5 API
- al_get_first_config_section(3)
- Allegro 5 API
- al_get_next_config_entry(3)
- Allegro 5 API
- al_get_next_config_section(3)
- Allegro 5 API
- al_get_system_config(3)
- Allegro 5 API
- al_load_config_file(3)
- Allegro 5 API
- al_load_config_file_f(3)
- Allegro 5 API
- al_merge_config(3)
- Allegro 5 API
- al_merge_config_into(3)
- Allegro 5 API
- al_reconfigure_joysticks(3)
- Allegro 5 API
- al_remove_config_key(3)
- Allegro 5 API
- al_remove_config_section(3)
- Allegro 5 API
- al_save_config_file(3)
- Allegro 5 API
- al_save_config_file_f(3)
- Allegro 5 API
- al_set_config_value(3)
- Allegro 5 API
- alacritty(5), Alacritty(5)
- TOML configuration file format
- alacritty-bindings(5)
- Default configuration file bindings
- alerts.cfg(5)
- Configuration for for xymond_alert module
- alsaconf(8)
- configuration tool for the Advanced Linux Sound Architecture
- amaddclient(8)
- program to add client to an existing Amanda configuration
- amanda-changers(7)
- Configuring and Using Amanda Changers
- amanda-client.conf(5)
- Client configuration file for Amanda, the Advanced Maryland Automatic Network Disk Archiver
- amanda-devices(7)
- Configuring and Using Amanda Devices
- amanda-interactivity(7)
- Configuring Interactivity with Amanda Amanda
- amanda-scripts(7)
- Configuring and using the Script API
- amanda-security.conf(5)
- Client configuration file for Amanda
- amanda.conf(5)
- Main configuration file for Amanda, the Advanced Maryland Automatic Network Disk Archiver
- ambackup(8)
- back up all disks in an Amanda configuration
- amd.conf(5)
- Amd configuration file
- amdump(8)
- back up all disks in an Amanda configuration
- amdump_client(8)
- back up all disks in an Amanda configuration
- amgetconf(8)
- look up configuration parameters and manipulate debug logs
- amserverconfig(8)
- program to setup initial Amanda configuration
- anacrontab(5), /usr/local/etc/anacrontab(5)
- configuration file for anacron
- analysis.cfg(5)
- Configuration file for the xymond_client module
- and.conf(5), /etc/and.conf(5)
- general configuration parameters for the auto nice daemon
- anyconfig_cli(1)
- manual page for anyconfig_cli 0.9.5
- aoxsuper.conf(5)
- configuration file for Archiveopteryx
- ap-config(8)
- configure and monitor Atmel and NWN based APs
- apcctrl.conf(5)
- apcctrl(8) configuration file
- apcupsd.conf(5)
- apcupsd(8) configuration file
- app_config(3)
- application configuration system
- appjail-config(1)
- Configuration utiliy for templates
- appjail-cpuset(1)
- Configure processor sets for jails
- appjail-jail(1)
- Creates, removes, lists and configures jails
- appjail-quick(1)
- Create a pre-configured jail
- appjail.conf(5)
- Configuration parameters for AppJail
- applygnupgdefaults(8)
- Run gpgconf --apply-defaults for all users
- archiveopteryx.conf(5)
- configuration file for Archiveopteryx
- ares_reinit(3)
- ReInitialize a resolver channel from system configuration
- ares_save_options(3)
- Save configuration values obtained from initialized ares_channel
- ares_set_servers(3), ares_set_servers_ports(3)
- Initialize name server configuration for an ares channel. (deprecated)
- ares_set_socket_configure_callback(3)
- Set a socket configuration callback
- ares_set_sortlist(3)
- Initialize an ares_channel_t *sortlist configuration
- argus.conf(5)
- argus resource file
- atf-c(3), ATF_CHECK(3), ATF_CHECK_MSG(3), ATF_CHECK_EQ(3), ATF_CHECK_EQ_MSG(3), ATF_CHECK_MATCH(3), ATF_CHECK_MATCH_MSG(3), ATF_CHECK_STREQ(3), ATF_CHECK_STREQ_MSG(3), ATF_CHECK_INTEQ(3), ATF_CHECK_INTEQ_MSG(3), ATF_CHECK_ERRNO(3), ATF_REQUIRE(3), ATF_REQUIRE_MSG(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_EQ_MSG(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_MATCH_MSG(3), ATF_REQUIRE_STREQ(3), ATF_REQUIRE_STREQ_MSG(3), ATF_REQUIRE_INTEQ(3), ATF_REQUIRE_INTEQ_MSG(3), ATF_REQUIRE_ERRNO(3), ATF_TC(3), ATF_TC_BODY(3), ATF_TC_BODY_NAME(3), ATF_TC_CLEANUP(3), ATF_TC_CLEANUP_NAME(3), ATF_TC_HEAD(3), ATF_TC_HEAD_NAME(3), ATF_TC_NAME(3), ATF_TC_WITH_CLEANUP(3), ATF_TC_WITHOUT_HEAD(3), ATF_TP_ADD_TC(3), ATF_TP_ADD_TCS(3), atf_tc_get_config_var(3), atf_tc_get_config_var_wd(3), atf_tc_get_config_var_as_bool(3), atf_tc_get_config_var_as_bool_wd(3), atf_tc_get_config_var_as_long(3), atf_tc_get_config_var_as_long_wd(3), atf_no_error(3), atf_tc_expect_death(3), atf_tc_expect_exit(3), atf_tc_expect_fail(3), atf_tc_expect_pass(3), atf_tc_expect_signal(3), atf_tc_expect_timeout(3), atf_tc_fail(3), atf_tc_fail_nonfatal(3), atf_tc_pass(3), atf_tc_skip(3), atf_utils_cat_file(3), atf_utils_compare_file(3), atf_utils_copy_file(3), atf_utils_create_file(3), atf_utils_file_exists(3), atf_utils_fork(3), atf_utils_free_charpp(3), atf_utils_grep_file(3), atf_utils_grep_string(3), atf_utils_readline(3), atf_utils_redirect(3), atf_utils_wait(3)
- C API to write ATF-based test programs
- atf-sh(3), atf_add_test_case(3), atf_check(3), atf_check_equal(3), atf_check_not_equal(3), atf_config_get(3), atf_config_has(3), atf_expect_death(3), atf_expect_exit(3), atf_expect_fail(3), atf_expect_pass(3), atf_expect_signal(3), atf_expect_timeout(3), atf_fail(3), atf_get(3), atf_get_srcdir(3), atf_pass(3), atf_require_prog(3), atf_set(3), atf_skip(3), atf_test_case(3)
- POSIX shell API to write ATF-based test programs
- atpdiag(1)
- checks atp qwk reader configuration
- audio_outputs(3), audio_outputs (3)
- Returns a list of possible device names for audio_reconfigure
- audio_reconfigure(3), audio_reconfigure (3)
- Control audio device output parameters
- auditctl(2)
- configure system audit parameters
- auditon(2)
- configure system audit parameters
- augmatch(1)
- inspect and match contents of configuration files
- augtool(1)
- inspect and modify configuration files
- auth.conf(5)
- Configuration of authentication mechanisms for web interface of Sympa
- autoconf2.69(1), autoconf(1)
- Generate configuration scripts
- autoconf2.72(1), autoconf(1)
- Generate configuration scripts
- autoheader2.69(1), autoheader(1)
- Create a template header for configure
- autoheader2.72(1), autoheader(1)
- Create a template header for configure
- automake(1)
- Generate Makefile.in files for configure from Makefile.am
- automatic_lists_description.conf(5)
- Description of automatic list creation with web interface
- automounter(8)
- Dynamically configure amd for existing devices
- automounter.conf(5)
- Define runtime parameters for automounter
- automx.conf(5)
- automx configuration parameters rst2man-indent-level 0 1 rstReportMargin $1
- automx_ldap(5)
- automx LDAP backend configuration parameters rst2man-indent-level 0 1 rstReportMargin $1
- automx_script(5)
- automx script backend configuration parameters rst2man-indent-level 0 1 rstReportMargin $1
- automx_sql(5)
- automx SQL backend configuration parameters rst2man-indent-level 0 1 rstReportMargin $1
- autoopts-config(1)
- script to get information about installed version of autoopts
- autorandr(1)
- automatically select a display configuration based on connected devices
- autoreconf2.69(1), autoreconf(1)
- Update generated configuration files
- autoreconf2.72(1), autoreconf(1)
- Update generated configuration files
- autoscan2.69(1), autoscan(1)
- Generate a preliminary configure.in
- autoscan2.72(1), autoscan(1)
- Generate a preliminary configure.ac
- autoupdate2.69(1), autoupdate(1)
- Update a configure.in to a newer Autoconf
- autoupdate2.72(1), autoupdate(1)
- Update a configure.ac to a newer Autoconf
- avahi-autoipd(8)
- IPv4LL network address configuration daemon
- avahi-daemon.conf(5)
- avahi-daemon configuration file
- avahi-dnsconfd(8)
- Unicast DNS server from mDNS/DNS-SD configuration daemon
- avahi-dnsconfd.action(8)
- avahi-dnsconfd action script
- awesomerc(5)
- Configuration file for the awesome window manager
- awg(8)
- set and retrieve configuration of WireGuard interfaces
- barman(5)
- Barman Configurations Barman follows a convention over configuration approach, which simplifies configuration by allowing some options to be defined globally and overridden at the server level. This means you can set a default behavior for your servers and then customize specific servers as needed. This design reduces the need for excessive configuration while maintaining flexibility
- barman-cloud-backup(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-backup [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ { { -z | --gzip } | { -j | --bzip2 } | --snappy } ] [ { -h | --host } HOST ] [ { -p | --port } PORT ] [ { -U | --user } USER ] [ { -d | --dbname } DBNAME ] [ { -n | --name } BACKUP_NAME ] [ { -J | --jobs } JOBS ] [ { -S | --max-archive-size } MAX_ARCHIVE_SIZE ] [ --immediate-checkpoint ] [ --min-chunk-size MIN_CHUNK_SIZE ] [ --max-bandwidth MAX_BANDWIDTH ] [ --snapshot-instance SNAPSHOT_INSTANCE ] [ --snapshot-disk NAME [ --snapshot-disk NAME ... ] ] [ --snapshot-zone GCP_ZONE ] [ -snapshot-gcp-project GCP_PROJECT ] [ --tag KEY,VALUE [ --tag KEY,VALUE ... ] ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { -e | --encryption } { AES256 | aws:kms } ] [ --sse-kms-key-id SSE_KMS_KEY_ID ] [ --aws-region AWS_REGION ] [ --aws-await-snapshots-timeout AWS_AWAIT_SNAPSHOTS_TIMEOUT ] [ --aws-snapshot-lock-mode { compliance | governance } ] [ --aws-snapshot-lock-duration DAYS ] [ --aws-snapshot-lock-cool-off-period HOURS ] [ --aws-snapshot-lock-expiration-date DATETIME ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --encryption-scope ENCRYPTION_SCOPE ] [ --azure-subscription-id AZURE_SUBSCRIPTION_ID ] [ --azure-resource-group AZURE_RESOURCE_GROUP ] [ --gcp-project GCP_PROJECT ] [ --kms-key-name KMS_KEY_NAME ] [ --gcp-zone GCP_ZONE ] DESTINATION_URL SERVER_NAME Description The barman-cloud-backup script is used to create a local backup of a Postgres server and transfer it to a supported cloud provider, bypassing the Barman server. It can also be utilized as a hook script for copying Barman backups from the Barman server to one of the supported clouds (post_backup_retry_script). This script requires read access to PGDATA and tablespaces, typically run as the postgres user. When used on a Barman server, it requires read access to the directory where Barman backups are stored. If --snapshot- arguments are used and snapshots are supported by the selected cloud provider, the backup will be performed using snapshots of the specified disks (--snapshot-disk). The backup label and metadata will also be uploaded to the cloud. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. IMPORTANT: 0.0 3.5 The cloud upload may fail if any file larger than the configured --max-archive-size is present in the data directory or tablespaces. However, Postgres files up to 1GB are always allowed, regardless of the --max-archive-size setting. Parameters 0.0 SERVER_NAME Name of the server to be backed up. DESTINATION_URL URL of the cloud destination, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. -z / --gzip gzip-compress the backup while uploading to the cloud (should not be used with python < 3.2). -j / --bzip2 bzip2-compress the backup while uploading to the cloud (should not be used with python < 3.3). --snappy snappy-compress the backup while uploading to the cloud (requires optional python-snappy library). -h / --host Host or Unix socket for Postgres connection (default: libpq settings). -p / --port Port for Postgres connection (default: libpq settings). -U / --user User name for Postgres connection (default: libpq settings). -d / --dbname Database name or conninfo string for Postgres connection (default: (dqpostgres(dq). -n / --name A name which can be used to reference this backup in commands such as barman-cloud-restore and barman-cloud-backup-delete. -J / --jobs Number of subprocesses to upload data to cloud storage (default: 2). -S / --max-archive-size Maximum size of an archive when uploading to cloud storage (default: 100GB). --immediate-checkpoint Forces the initial checkpoint to be done as quickly as possible. --min-chunk-size Minimum size of an individual chunk when uploading to cloud storage (default: 5MB for aws-s3, 64KB for azure-blob-storage, not applicable for google-cloud-storage). --max-bandwidth The maximum amount of data to be uploaded per second when backing up to object storages (default: 0 - no limit). --snapshot-instance Instance where the disks to be backed up as snapshots are attached. --snapshot-disk Name of a disk from which snapshots should be taken. --tag Tag to be added to all uploaded files in cloud storage, and/or to snapshots created, if snapshots are used. --tags Tags to be added to all uploaded files in cloud storage, and/or to snapshots created, if snapshots are used. NOTE: 0.0 3.5 If you are using --tags before positional arguments, you must insert -- after it to indicate the end of optional arguments. This tells the parser to treat everything after -- as positional arguments. Without the --, Barman may misinterpret positional arguments as values for the last option. Deprecated since version 3.15: --tags is deprecated. Use --tag instead. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file)
- replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). -e / --encryption The encryption algorithm used when storing the uploaded data in S3. Allowed options: 7.0 (bu 2 AES256. (bu 2 aws:kms. --sse-kms-key-id The AWS KMS key ID that should be used for encrypting the uploaded data in S3. Can be specified using the key ID on its own or using the full ARN for the key. Only allowed if -e / --encryption is set to aws:kms. --aws-region The name of the AWS region containing the EC2 VM and storage volumes defined by the --snapshot-instance and --snapshot-disk arguments. --aws-await-snapshots-timeout The length of time in seconds to wait for snapshots to be created in AWS before timing out (default: 3600 seconds). --aws-snapshot-lock-mode The lock mode for the snapshot. This is only valid if --snapshot-instance and --snapshot-disk are set. Allowed options: 7.0 (bu 2 compliance. (bu 2 governance. --aws-snapshot-lock-duration The lock duration is the period of time (in days) for which the snapshot is to remain locked, ranging from 1 to 36,500. Set either the lock duration or the expiration date (not both). --aws-snapshot-lock-cool-off-period The cooling-off period is an optional period of time (in hours) that you can specify when you lock a snapshot in compliance mode, ranging from 1 to 72. --aws-snapshot-lock-expiration-date The lock duration is determined by an expiration date in the future. It must be at least 1 day after the snapshot creation date and time, using the format YYYY-MM-DDTHH:MM:SS.sssZ. Set either the lock duration or the expiration date (not both). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default. --encryption-scope The name of an encryption scope defined in the Azure Blob Storage service which is to be used to encrypt the data in Azure. --azure-subscription-id The ID of the Azure subscription which owns the instance and storage volumes defined by the --snapshot-instance and --snapshot-disk arguments. --azure-resource-group The name of the Azure resource group to which the compute instance and disks defined by the --snapshot-instance and --snapshot-disk arguments belong. Extra options for GCP cloud provider 0.0 --gcp-project GCP project under which disk snapshots should be stored. --snapshot-gcp-project (deprecated) GCP project under which disk snapshots should be stored - replaced by --gcp-project. --kms-key-name The name of the GCP KMS key which should be used for encrypting the uploaded data in GCS. --gcp-zone Zone of the disks from which snapshots should be taken. --snapshot-zone (deprecated) Zone of the disks from which snapshots should be taken - replaced by --gcp-zone
- barman-config-switch(1)
- Barman Sub-Commands
- barman-config-update(1)
- Barman Sub-Commands
- bbkeysrc(5)
- bbkeys configuration file
- bdep-clean(1)
- clean project in build configurations
- bdep-config(1)
- manage project build configurations
- bdep-deinit(1)
- deinitialize project in build configurations
- bdep-init(1)
- initialize project in build configurations
- bdep-projects-configs(1)
- specifying projects and configurations
- bdep-sync(1)
- synchronize project and build configurations
- bdep-test(1)
- test project in build configurations
- bdep-update(1)
- update project in build configurations
- beetsconfig(5)
- beets configuration file Beets has an extensive configuration system that lets you customize nearly every aspect of its operation. To configure beets, you create a file called config.yaml. The location of the file depends on your platform (type beet config -p to see the path on your system): 0.0 (bu 2 On Unix-like OSes, write ~/.config/beets/config.yaml. (bu 2 On Windows, use %APPDATA%ebeetseconfig.yaml. This is usually in a directory like C:eUserseYoueAppDataeRoaming. (bu 2 On OS X, you can use either the Unix location or ~/Library/Application Support/beets/config.yaml. You can launch your text editor to create or update your configuration by typing beet config -e. (See the X'tty: link #config-cmd'%configX'tty: link' command for details.) It is also possible to customize the location of the configuration file and even use multiple layers of configuration. See %Configuration Location, below. The config file uses X'tty: link https://yaml.org/'%YAMLX'tty: link' syntax. You can use the full power of YAML, but most configuration options are simple key/value pairs. This means your config file will look like this: 0.0 3.5 option: value another_option: foo bigger_option: key: value foo: bar In YAML, you will need to use spaces (not tabs!) to indent some lines. If you have questions about more sophisticated syntax, take a look at the X'tty: link https://yaml.org/'%YAMLX'tty: link' documentation. The rest of this page enumerates the dizzying litany of configuration options available in beets. You might also want to see an %example. 0.0 (bu 2 %Global Options 2.0 (bu 2 %library (bu 2 %directory (bu 2 %plugins (bu 2 %include (bu 2 %pluginpath (bu 2 %ignore (bu 2 %ignore_hidden (bu 2 %replace (bu 2 %path_sep_replace (bu 2 %asciify_paths (bu 2 %art_filename (bu 2 %threaded (bu 2 %format_item (bu 2 %format_album (bu 2 %sort_item (bu 2 %sort_album (bu 2 %sort_case_insensitive (bu 2 %original_date (bu 2 %artist_credit (bu 2 %per_disc_numbering (bu 2 %aunique (bu 2 %sunique (bu 2 %terminal_encoding (bu 2 %clutter (bu 2 %max_filename_length (bu 2 %id3v23 (bu 2 %va_name (bu 2 %UI Options 2.0 (bu 2 %color (bu 2 %colors (bu 2 %terminal_width (bu 2 %length_diff_thresh (bu 2 %import (bu 2 %Importer Options 2.0 (bu 2 %write (bu 2 %copy (bu 2 %move (bu 2 %link (bu 2 %hardlink (bu 2 %reflink (bu 2 %resume (bu 2 %incremental (bu 2 %incremental_skip_later (bu 2 %from_scratch (bu 2 %quiet (bu 2 %quiet_fallback (bu 2 %none_rec_action (bu 2 %timid (bu 2 %log (bu 2 %default_action (bu 2 %languages (bu 2 %ignored_alias_types (bu 2 %detail (bu 2 %group_albums (bu 2 %autotag (bu 2 %duplicate_keys (bu 2 %duplicate_action (bu 2 %duplicate_verbose_prompt (bu 2 %bell (bu 2 %set_fields (bu 2 %singleton_album_disambig (bu 2 %MusicBrainz Options 2.0 (bu 2 %enabled (bu 2 %searchlimit (bu 2 %extra_tags (bu 2 %genres (bu 2 %external_ids (bu 2 %Autotagger Matching Options 2.0 (bu 2 %max_rec (bu 2 %preferred (bu 2 %ignored (bu 2 %required (bu 2 %ignored_media (bu 2 %ignore_data_tracks (bu 2 %ignore_video_tracks (bu 2 %Path Format Configuration (bu 2 %Configuration Location 2.0 (bu 2 %Environment Variable (bu 2 %Command-Line Option (bu 2 %Default Location (bu 2 %Example
- bgpd.conf(5)
- BGP routing daemon configuration file
- bincimap.conf(5)
- Global configuration file for Binc IMAP
- bip.conf(5)
- Configuration file for BIP IRC Proxy
- bitlbee.conf(5)
- configuration file for bitlbee (8)
- bmd.conf(5)
- configuration file for bmd(8)
- bnetd.conf(5)
- configuration for the Unix Battle.net daemon
- bochsrc(5)
- Configuration file for Bochs
- borg-config(1)
- get, set, and delete values in a repository or cache config file
- bpkg-cfg-create(1)
- create configuration
- bpkg-cfg-info(1)
- print configuration information
- bpkg-cfg-link(1)
- link configuration
- bpkg-cfg-unlink(1)
- unlink configuration
- bpkg-pkg-configure(1)
- configure package
- bpkg-rep-add(1)
- add repository to configuration
- bpkg-rep-list(1)
- list repositories in configuration
- bpkg-rep-remove(1)
- remove repository from configuration
- bpython-config(5)
- user configuration file for bpython
- broot(1)
- Tree view, file manager, configurable launcher
- bsdconfig(8)
- system configuration utility
- bsddialog(3), bsddialog_backtitle(3), bsddialog_backtitle_rf(3), bsddialog_calendar(3), bsddialog_clear(3), bsddialog_color(3), bsddialog_color_attrs(3), bsddialog_checklist(3), bsddialog_datebox(3), bsddialog_end(3), bsddialog_form(3), bsddialog_gauge(3), bsddialog_geterror(3), bsddialog_get_theme(3), bsddialog_hascolors(3), bsddialog_infobox(3), bsddialog_init(3), bsddialog_init_notheme(3), bsddialog_initconf(3), bsddialog_inmode(3), bsddialog_menu(3), bsddialog_mixedgauge(3), bsddialog_mixedlist(3), bsddialog_msgbox(3), bsddialog_pause(3), bsddialog_radiolist(3), bsddialog_rangebox(3), bsddialog_refresh(3), bsddialog_set_theme(3), bsddialog_set_default_theme(3), bsddialog_textbox(3), bsddialog_timebox(3), bsddialog_yesno(3)
- TUI dialogs
- bsdisks.conf(5)
- configuration file for the bsdisks utility
- bsmtrace.conf(5)
- configuration file for bsmtrace
- bsnmp-regex.conf(5)
- the configuration file for the bsnmp-regex(8) module
- buffindexed.conf(5)
- Configuration for the buffindexed overview method
- build.xml(5)
- configuration file used by Apache Ant to build projects
- buildah-config(1)
- Update image configuration settings
- buildah-mkcw(1)
- Convert a conventional container image into a confidential workload image
- buildflags.awk(1)
- convert buildflags.conf(5) files into make syntax
- buildflags.conf(5)
- set build options for ports(7), world and everything
- buildflags.mk(1)
- import buildflags.conf(5)
- burst_buffer.conf(5)
- Slurm configuration file for burst buffer management
- byobu(1)
- wrapper script for seeding a user's byobu configuration and launching a text based window manager (either screen or tmux)
- byobu-config(1)
- Configuration utility for byobu
- byobu-ctrl-a(1)
- Configure Byobu's ctrl-a behavior
- byobu-prompt(1), byobu-enable-prompt(1), byobu-disable-prompt(1)
- add and remove a nice color prompt to your shell configuration
- c-icap-config(8)
- script to get information about c-icap server
- c-icap-libicapapi-config(8)
- script to get information about c-icap library
- caca-config(1)
- script to get information about the installed version of libcaca
- cagebreak-config(5)
- Cagebreak configuration file
- castgetrc(5)
- configuration file for castget
- catfish(1)
- File searching tool which is configurable via the command line
- catsit.conf(5)
- catsitd services list
- cb_share_config(1)
- Import/export parts of Code::Blocks configuration
- cbcrc(4)
- Configuration file for Couchbase command line tools
- cdeploy(1)
- deploy a set of configuration files to a target file system
- cdk5-config(1)
- configuration for libcdk5
- certbot(1)
- Automatically configure HTTPS using Let's Encrypt
- certmonger.conf(5)
- configuration file for certmonger
- ceylon-config(1), ceylon config(1)
- Manages Ceylon configuration files
- cfg(3m)
- persistent configuration properties interface
- cfg-clex(1)
- CLEX configuration utility
- cfgread(3), cfgget(3), cfgget2(3)
- functions to read and parse configuration files
- cgitrc(5)
- runtime configuration for cgit
- cgroup.conf(5)
- Slurm configuration file for the cgroup support
- charset.conf(5)
- Configuration file for legacy character set support by Sympa
- chilli.conf(5)
- Chilli Configuration
- chilli_radconfig(1)
- Utility function to fetch configurations over RADIUS
- chocolate-doom-setup(6)
- configuration tool for chocolate-doom
- chocolate-doom.cfg(5)
- Chocolate Doom configuration file
- chocolate-heretic-setup(6)
- configuration tool for chocolate-heretic
- chocolate-heretic.cfg(5)
- Chocolate Heretic configuration file
- chocolate-hexen-setup(6)
- configuration tool for chocolate-hexen
- chocolate-hexen.cfg(5)
- Chocolate Hexen configuration file
- chocolate-strife-setup(6)
- configuration tool for chocolate-strife
- chocolate-strife.cfg(5)
- Chocolate Strife configuration file
- chrony.conf(5)
- chronyd configuration file
- cinnamon-settings(1)
- Configuration panel for cinnamon
- clamav-milter.conf(5)
- Configuration file for clamav-milter
- clamconf(1)
- Clam AntiVirus configuration utility
- clamd.conf(5)
- Configuration file for Clam AntiVirus Daemon
- clamsmtpd.conf(5)
- the configuration file for clamsmtpd(8)
- classes.conf(5)
- class configuration file for cups
- cliapp(5)
- config file and option conventions for Python command line framework
- client-local.cfg(5)
- Local configuration settings for Xymon clients
- client.conf(5)
- client configuration file for cups (deprecated on macos)
- clients.conf(5)
- FreeRADIUS client configuration
- cloginrc(5), .cloginrc(5)
- clogin configuration file
- cmake-configure-log(7)
- CMake Configure Log New in version 3.26
- cmap_keys(7)
- Overview of keys stored in the Configuration Map
- cmap_keys(8)
- Overview of keys stored in the Configuration Map
- cmap_overview(3)
- Overview of the Configuration Map
- cmap_overview(8)
- Overview of the Configuration Map
- cnfsheadconf(8)
- Read and write CNFS headers
- coap-oscore-conf(5)
- CoAP OSCORE configuration file format
- coap-tls-engine-conf(5)
- CoAP TLS ENGINE configuration file format
- coap_oscore(3), coap_new_oscore_conf(3), coap_delete_oscore_conf(3), coap_new_oscore_recipient(3), coap_delete_oscore_recipient(3), coap_new_client_session_oscore(3), coap_new_client_session_oscore_pki(3), coap_new_client_session_oscore_psk(3), coap_context_oscore_server(3)
- Work with CoAP OSCORE
- coap_tls_library(3), coap_get_tls_library_version(3), coap_string_tls_support(3), coap_string_tls_version(3), coap_show_tls_version(3), coap_tls_engine_configure(3), coap_tls_engine_remove(3)
- Work with CoAP TLS libraries
- cob-config(1)
- manual page for cob-config 3.2.0
- collectd.conf(5)
- Configuration for the system statistics collection daemon collectd
- combo.cfg(5)
- Configuration of combostatus tool
- commoncpp-config(1)
- script to get information about common c++ library
- confctl(1)
- sysctl-like tool for config files
- confget(1)
- read a variable from a configuration file
- conficker-c(3)
- SiLK plug-in to detect traffic matching the Conficker C worm
- config(5)
- OpenSSL CONF library configuration files
- config(5ossl)
- OpenSSL CONF library configuration files
- config.guess2.69(1)
- guess the build system triplet
- config.sub2.69(1)
- validate and canonicalize a configuration triplet
- configFileLoad(3)
- parse a configuration file
- config_is_hooked(3)
- Tells if a config section has custom hooks. Allegro game programming library
- configbody(i4), itcl::configbody(i4)
- change the "config" code for a public variable
- configbody(itcl)
- change the "config" code for a public variable
- configctl(1)
- Generic tool to parse and update configuration files
- configure-grub(1)
- NorNet configure-grub
- configure.nx(3), nx::configure(3)
- Get and set configuration options on the object system
- configure.tcl90(n), oo::configurable(n), configure(n), property(n)
- class that makes configurable classes and objects, and supports making configurable properties
- conflict(8)
- search for alias/password conflicts
- confreport.cgi(1)
- Xymon Configuration report
- conman.conf(5)
- ConMan daemon configuration file
- conserver.cf(5)
- console configuration file for conserver (8)
- containers-certs.d(5)
- Directory for storing custom container-registry TLS configurations
- containers-mounts.conf(5)
- configuration file for default mounts in containers
- containers-registries.conf(5)
- Syntax of System Registry Configuration File
- containers-registries.conf.d(5)
- directory for drop-in registries.conf files
- containers-registries.d(5)
- Directory for various registries configurations
- containers.conf(5)
- The container engine configuration file specifies default configuration options and command-line flags for container engines
- coredns-quic(7), quic(7)
- configures DNS-over-QUIC (DoQ) server options
- coredns-timeouts(7), timeouts(7)
- allows you to configure the server read, write and idle timeouts for the TCP, TLS and DoH servers
- coredns-tls(7), tls(7)
- allows you to configure the server certificates for the TLS and gRPC servers
- corefile(5)
- configuration file for CoreDNS
- corosync.conf(5)
- corosync executive configuration file
- cpl_complete_word(3), cfc_file_start(3), cfc_literal_escapes(3), cfc_set_check_fn(3), cpl_add_completion(3), cpl_file_completions(3), cpl_last_error(3), cpl_list_completions(3), cpl_recall_matches(3), cpl_record_error(3), del_CplFileConf(3), del_WordCompletion(3), new_CplFileConf(3), new_WordCompletion(3)
- lookup possible completions for a word
- crispy-doom.cfg(5)
- Crispy Doom configuration file
- crispy-heretic.cfg(5)
- Crispy Heretic configuration file
- crispy-hexen.cfg(5)
- Crispy Hexen configuration file
- crispy-strife.cfg(5)
- Crispy Strife configuration file
- critical.cfg(5)
- Configuration of the showgraph CGI
- crm(8)
- Pacemaker command line interface for configuration and management
- ctpp2-config(1)
- CTPP configuration tool
- cups-browsed.conf(5)
- server configuration file for cups-browsed
- cups-config(1)
- get cups api, compiler, directory, and link information (deprecated)
- cups-files.conf(5)
- file and directory configuration file for cups
- cupsctl(8)
- configure cupsd.conf options
- cupsd.conf(5)
- server configuration file for cups
- cupstestppd(1)
- test conformance of ppd files (deprecated)
- curl-config(1)
- Get information about a libcurl installation
- curl_global_trace(3)
- log configuration
- cvsd-buginfo(8)
- print out cvsd configuration information for bug reports
- cvsd.conf(5)
- configuration file for cvsd
- cvsgraph.conf(5)
- CVS/RCS repository grapher configuration
- cvswrap.conf(5)
- configuration file for cvswrap
- cwmrc(5)
- calm window manager configuration file
- cycbuff.conf(5)
- Configuration file for INN CNFS storage method
- cyrus.conf(5)
- Cyrus IMAP documentation Cyrus configuration file
- dMagneticini(5), dMagnetic.ini(5)
- Configuration file for dMagnetic
- dahdi_cfg(8)
- configures DAHDI kernel modules from /usr/local/etc/dahdi/system.conf
- dahdi_scan(8)
- Print Configuration of DAHDI Spans
- darkice.cfg(5)
- configuration file for darkice
- darktable-cmstest(1)
- test if the color management subsystem of your computer is correctly configured
- davfs2.conf(5), @CONFIGFILE@(5)
- Configuration file for @PROGRAM_NAME@
- dconf(1)
- Simple tool for manipulating a dconf database
- dconf(7)
- A configuration system
- dconf-editor(1)
- Graphical editor for gsettings and dconf
- dconf-service(1)
- D-Bus service for writes to the dconf database
- ddns-confgen(8)
- ddns key generation tool
- deb-conffiles(5)
- package conffiles
- debuginfod-client-config(7)
- debuginfod client environment variables, cache control files and etc
- decrypt-dbeaver-configuration(1)
- Decrypt DBeaver Credentials Configuration File
- default.cfg(5)
- Chocolate Doom configuration file
- default.conf(5)
- IPA configuration file
- detoxrc(5)
- configuration file for detox(1)
- dhclient(8)
- Dynamic Host Configuration Protocol Client
- dhclient-script(8)
- DHCP client network configuration script
- dhclient.conf(5)
- DHCP client configuration file
- dhcp-options(5)
- Dynamic Host Configuration Protocol options
- dhcp6c.conf(5)
- DHCPv6 client configuration file
- dhcp6s.conf(5)
- DHCPv6 server configuration file
- dhcp_probe.cf(5)
- configuration file for dhcp_probe
- dhcpcd-curses(8)
- a curses frontend for network configuration
- dhcpcd-gtk(8)
- a GTK+ frontend for network configuration
- dhcpcd-run-hooks(8)
- DHCP client configuration script
- dhcpcd.conf(5)
- dhcpcd configuration file
- dhcpd(8)
- Dynamic Host Configuration Protocol Server
- dhcpd.conf(5)
- dhcpd configuration file
- dhcrelay(8)
- Dynamic Host Configuration Protocol Relay Agent
- dhexrc(5)
- Configuration File for dhex
- diablo-files(5)
- Synopsis of configuration and control files for Diablo
- dicod.conf(5)
- GNU dictionary server configuration file
- direnv.toml(1)
- the direnv configuration file
- direvent.conf(5)
- configuration file for direvent (8)
- dirvish.conf(5)
- dirvish configuration file
- diskcheckd.conf(5), diskcheckd(5)
- daemon to check for disk read errors
- dispatch_io_create(3), dispatch_io_create_with_path(3), dispatch_io_close(3), dispatch_io_set_high_water(3), dispatch_io_set_low_water(3), dispatch_io_set_interval(3), dispatch_io_barrier(3)
- open, close and configure dispatch I/O channels
- displays(5)
- Display Configuration File
- dkimpy-milter.conf(5), dkimpy-milter(5)
- Python milter for DKIM signing and validation
- dns-conf-check(1)
- check /etc/named.conf file "dns-conf-check(1)" "check /etc/named.conf file"
- dnsjit.lib.parseconf(3)
- Parse simple config files
- doas.conf(5)
- doas configuration file
- doinkd.cf(5), /usr/local/etc/doinkd/doinkd.cf(5)
- doinkd configuration file format
- domains.conf(5)
- lfacme domains configuration file
- doveconf(1)
- Dovecot(aqs configuration dumping utility
- dovecot(1)
- a secure and highly configurable IMAP and POP3 server
- doxywizard(1)
- a tool to configure and run doxygen on your source files
- dpkg-checkbuilddeps(1)
- check build dependencies and conflicts
- dpkg.cfg(5)
- dpkg configuration file
- drmModeGetResources(3)
- retrieve current display configuration information
- dsc.conf(5)
- Configuration for the DNS Statistics Collector
- dselect.cfg(5)
- dselect configuration file
- dtcpc(8)
- Dynamic Tunnel Configuration Protocol client
- dtcpclient(8)
- Dynamic Tunnel Configuration Protocol client
- dtcps(8)
- Dynamic Tunnel Configuration Protocol daemon
- dte(1)
- A small, configurable text editor
- dterc(5)
- Command and configuration language used by dte(1)
- dumpfcfg(1)
- dump fidoconfig to file or stdout
- dune-config(5), duneN'45'config(5)
- N'45' configuring the dune build system
- dune-ocaml-merlin(1), duneN'45'ocamlN'45'merlin(1)
- N'45' Start a merlin configuration server
- dunst(5), dunstrc(5)
- dunst configuration file
- e2fsck.conf(5)
- Configuration file for e2fsck
- eboard-config(1)
- program to get information about the installed eboard
- ecl-config(1)
- Embeddable Common Lisp configuration query
- eclat.conf(5)
- configuration file for eclat (1)
- edit_list.conf(5)
- Configuration of privileges to edit list configuration
- editorconfig(1)
- EditorConfig Command
- editorconfig-format(5)
- EditorConfig File Format
- editorconfig.h(3)
- Header file of EditorConfig
- editorconfig_handle.h(3)
- Header file of EditorConfig handle
- editrc(5)
- configuration file for editline library
- ejabberd.yml(5)
- main configuration file for ejabberd
- elinks.conf(5)
- ELinks configuration file
- emil.cf(1)
- configuration file for emil(1)
- encrypt-dbeaver-configuration(1)
- Encrypt DBeaver Credentials Configuration File
- epn.conf(5)
- Expiring Password Notification configuration file
- estconfig(1)
- configuration utility of Hyper Estraier
- etter.conf(5)
- Ettercap configuration file
- exconfig(3)
- Using the configuration routines. Allegro game programming library
- expire.ctl(5)
- Configuration file for article expiration
- explain_fpathconf(3)
- explain fpathconf(3) errors require_index { }
- explain_fpathconf_or_die(3)
- get file configuration and report errors require_index { "get configuration values for files and report errors" }
- explain_pathconf(3)
- explain pathconf(3) errors require_index { }
- explain_pathconf_or_die(3)
- get configuration values and report errors require_index { "get configuration values for files and report errors" }
- ext_sensors.conf(5)
- Slurm configuration file for the external sensors plugin
- ezjail.conf(5), -(5)
- ezjail.conf configuration file for ezjail script
- ezmlm-confirm(1)
- process user actions for message confirm and discard
- ezmlm-glconf(1)
- create config file for global ezmlm-request address
- ezmlmrc(5)
- ezmlm-make configuration file
- fail2ban-client(1)
- configure and control the server
- fail2ban-jail.conf(5), jail.conf(5)
- configuration for the fail2ban server
- fc-conflist(1)
- list the configuration files processed by Fontconfig
- fcft_log_init(3)
- configure logging in fcft
- fcft_set_emoji_presentation(3)
- configures the default emoji presentation
- fcft_set_scaling_filter(3)
- configures the filter to use when downscaling bitmap fonts
- fconf2(1), fconf2*(1)
- Converts fidoconfig to another format
- fconfigure.tcl86(n), fconfigure(n)
- Set and get options on a channel
- fconfigure.tcl90(n), fconfigure(n)
- Set and get options on a channel
- fcron.conf(5)
- configuration file for fcron and fcrontab
- fdm.conf(5)
- fdm configuration file
- feedback-themes(5)
- Theme configuration for feedbackd
- ffproxy.conf(5)
- filtering HTTP/HTTPS proxy server configuration file
- fftw-wisdom-to-conf(1)
- generate FFTW wisdom (pre-planned transforms)
- fido_dev_enable_entattest(3), fido_dev_toggle_always_uv(3), fido_dev_force_pin_change(3), fido_dev_set_pin_minlen(3), fido_dev_set_pin_minlen_rpid(3)
- CTAP 2.1 configuration authenticator API
- filetypes.conf(5)
- the file type configuration of highlight
- filtermailex(5)
- filtermail configuration file examples
- filtermailrc(5)
- filtermail configuration file
- findlib.conf(5), R findlib.conf(5)
- [Configuration of findlib/ocamlfind]c
- fips_config(5ossl)
- OpenSSL FIPS configuration
- flexbackup.conf(5), /etc/flexbackup.conf(5)
- a flexible backup/archiving tool configuration file
- flexiblas_load_backend(3)
- load a backend from the FlexiBLAS configuration
- flickcurl-config(1)
- script to get information about the installed version of flickcurl
- flowd.conf(5)
- NetFlow Collector daemon configuration file
- fltk-config(1)
- script to get information about the installed version of fltk
- flush_config_file(3)
- Flushes the current config file to disk. Allegro game programming library
- fluxbox-apps(5)
- per-window attribute configuration for fluxbox(1)
- fluxbox-keys(5)
- keyboard shortcuts configuration for fluxbox(1)
- fmtutil.cnf(5)
- configuration file for fmtutil
- fnott.ini(5), fnott(5)
- configuration file
- fonts-conf(5), fonts.conf(5)
- Font configuration files
- foomatic-configure(1)
- the main configuration program of the foomatic printing system
- foot.ini(5)
- configuration file for foot(1)
- fpc.cfg(5)
- Free Pascal Compiler (FPC) configuration file, name derived from Free Pascal Compiler
- fpcmake(5), Makefile.fpc(5)
- Configuration file for fpcmake
- fpcmkcfg(1)
- The Free Pascal configuration program
- free-sa.conf(5)
- Configuration file for free-sa statistic analyzer
- free_config_entries(3)
- Frees memory allocated for config entry lists. Allegro game programming library
- freehdl-config(1), FreeHDL-CONFIG(1)
- The FreeHDL configuration script
- freeipmi.conf(5)
- specify default values to FreeIPMI
- freeipmi_interpret_sel.conf(5)
- specify system event log (SEL) interpretation rules
- freeipmi_interpret_sensor.conf(5)
- specify sensor interpretation rules
- freetds.conf(5)
- configuration file for FreeTDS
- freshclam.conf(5)
- Configuration file for Clam AntiVirus database update tool
- fscd.conf(5)
- configuration file for fscd(8)
- fswatch.conf(5)
- fswatch configuration file syntax
- fswconf(1)
- shows configuration
- ftp-proxy.conf(5)
- configuration file for FTP-Proxy
- ftpcount(1)
- show current number of connections for each proftpd server configuration
- ftpd.conf(5)
- tnftpd(8) configuration file
- fuzzel.ini(5)
- configuration file for fuzzel(1)
- fvwm-config(1)
- query an existing fvwm installation
- fvwm-convert-2.6(1)
- convert fvwm 2.4.x configuration file to fvwm 2.6 style
- fvwm-themes-config(1)
- fvwm-themes manager and configurator
- fwup(1)
- configurable embedded firmware update creator and runner
- g-wrap-config(1)
- script to get information about the installed version of G-Wrap
- gallery-dl.conf(5)
- gallery-dl configuration file
- gammu-config(1)
- Gammu configurator rst2man-indent-level 0 1 rstReportMargin $1
-
- gammu-smsdrc(5)
- gammu-smsd(1) configuration file rst2man-indent-level 0 1 rstReportMargin $1
- gammurc(5)
- gammu(1) configuration file rst2man-indent-level 0 1 rstReportMargin $1
- gauche-config(1)
- retrieve configuration parameters of Gauche
- gbsplayrc(5)
- Gameboy sound player configuration file
- gcin-tools(1)
- configuration tools of gcin
- gcli(5)
- gcli configuration file formats
- gconftool-2(1)
- GNOME configuration tool
- gdal-config(1)
- Determines various information about a GDAL installation. Determines various information about a GDAL installation
- gdnsd.config(5)
- gdnsd configuration file
- gdome-config(1)
- script to get information about the installed version of gdome2
- gencfu(1)
- Generates Unicode Confusable data files
- genisoimagerc(5)
- startup configuration file for genisoimage
- gentoo(1)
- A highly configurable file manager for X
- geoclue(5), geoclue.conf(5)
- geoclue configuration parameters
- get_config_argv(3)
- Reads a token list from the configuration file. Allegro game programming library
- get_config_float(3)
- Retrieves a float from the configuration file. Allegro game programming library
- get_config_hex(3)
- Retrieves a hexadecimal value from the configuration file. Allegro game programming library
- get_config_id(3)
- Retrieves a driver ID from a configuration file. Allegro game programming library
- get_config_int(3)
- Retrieves an integer from the configuration file. Allegro game programming library
- get_config_string(3)
- Retrieves a string from the configuration file. Allegro game programming library
- get_config_text(3)
- Returns a string translated to the current language. Allegro game programming library
- get_keys(3), get_keys (3)
- Retrieve all keys associated with a target or target/config
- getstyle(1)
- dumps the current Window Maker style related configuration or creates a theme pack
- gfx.toml(5)
- Configuration file for xrdp(8) graphics pipeline extension
- gh-config(1)
- Manage configuration for gh
- gh-config-clear-cache(1)
- Clear the cli cache
- gh-config-get(1)
- Print the value of a given configuration key
- gh-config-list(1)
- Print a list of configuration keys and values
- gh-config-set(1)
- Update configuration with a value for the given key
- gh-repo-set-default(1)
- Configure default repository for this directory
- gimprc(5)
- gimp configuration file
- git-bug-bridge(1)
- Configure and use bridges to other bug trackers
- git-bug-bridge-configure(1)
- Configure a new bridge
- git-bug-bridge-rm(1)
- Delete a configured bridge
- git-config(1)
- Get and set repository or global options
- git-lfs-config(5)
- Configuration options for git-lfs
- git-lfs-install(1)
- Install Git LFS configuration
- git-lfs-uninstall(1)
- Remove Git LFS configuration
- git-mergetool(1)
- Run merge conflict resolution tools to resolve merge conflicts
- git-rerere(1)
- Reuse recorded resolution of conflicted merges
- gitup.conf(5)
- Configuration file for gitup(1)
- gitweb.conf(5)
- Gitweb (Git web interface) configuration file
- glXGetConfig(3), "glXGetConfig(3)
- return information about GLX visuals
- gl_get_line(3), new_GetLine(3), del_GetLine(3), gl_customize_completion(3), gl_change_terminal(3), gl_configure_getline(3), gl_load_history(3), gl_save_history(3), gl_group_history(3), gl_show_history(3), gl_watch_fd(3), gl_inactivity_timeout(3), gl_terminal_size(3), gl_set_term_size(3), gl_resize_history(3), gl_limit_history(3), gl_clear_history(3), gl_toggle_history(3), gl_lookup_history(3), gl_state_of_history(3), gl_range_of_history(3), gl_size_of_history(3), gl_echo_mode(3), gl_replace_prompt(3), gl_prompt_style(3), gl_ignore_signal(3), gl_trap_signal(3), gl_last_signal(3), gl_completion_action(3), gl_display_text(3), gl_return_status(3), gl_error_message(3), gl_catch_blocked(3), gl_list_signals(3), gl_bind_keyseq(3), gl_erase_terminal(3), gl_automatic_history(3), gl_append_history(3), gl_query_char(3), gl_read_char(3)
- allow the user to compose an input line
- glab-auth-configure-docker(1)
- Register glab as a Docker credential helper
- glab-ci-config(1)
- Work with GitLab CI/CD configuration
- glab-ci-config-compile(1)
- View the fully expanded CI/CD configuration
- glab-cluster-agent-check_manifest_usage(1)
- Check agent configuration files for built-in GitOps manifests usage. (EXPERIMENTAL)
- glab-cluster-agent-update-kubeconfig(1)
- Update selected kubeconfig
- glab-config(1)
- Manage glab settings
- glab-config-edit(1)
- Opens the glab configuration file
- glab-config-get(1)
- Prints the value of a given configuration key
- glab-config-set(1)
- Updates configuration with the value of a given key
- globaliolimits.cfg(5)
- global I/O limiting configuration
- glutGameModeString(3)
- sets the game mode configuration via a string
- gmid.conf(5)
- gmid Gemini server configuration file
- gmond.conf(5)
- configuration file for ganglia monitoring daemon (gmond)
- gmx-confrms(1)
- Fit two structures and calculates the RMSD
- gmx-editconf(1)
- Convert and manipulates structure files
- gmx-genconf(1)
- Multiply a conformation in 'random' orientations
- gnuradio-config-info(1)
- show details on installed GNU radio
- gnutls_get_library_config(3)
- API function
- gnutls_get_system_config_file(3)
- API function
- gofish(5), gofish.conf(5)
- the configuration file for the GoFish gopher server
- gopherrc(5)
- configuration file for gopher(1)
- got.conf(5)
- Game of Trees configuration file
- gpg-error-config(1)
- Script to get information about the installed version of libgpg-error
- gpg-tui.toml(5)
- configuration file for gpg-tui
- gpgconf(1)
- Modify .gnupg home directories
- gpgrt-config(1)
- Helper script to get information about the installed version of gpg libraries
- grab.tk86(n), grab(n)
- Confine pointer and keyboard events to a window sub-tree
- graphs.cfg(5)
- Configuration of the showgraph CGI
- gres.conf(5)
- Slurm configuration file for Generic RESource (GRES) management
- greylist.conf(5)
- milter-greylist configuration file
- grub-mkconfig(8)
- generate a GRUB configuration file
- grub-syslinux2cfg(1)
- transform syslinux config into grub.cfg
- gsettings(1)
- GSettings configuration tool
- gsettings-data-convert(1)
- GConf to GSettings data migration
- gsettings-schema-convert(1)
- GConf to GSettings schema conversion
- gsl-config(1)
- script to get version number and compiler flags of the installed GSL library
- gst-config(1)
- configuration for libgst
- gtags.conf(5)
- configuration data for GNU Global
- gtkwaverc(5)
- GTKWave Configuration File
- guacd.conf(5), /usr/local/etc/guacamole-server/guacd.conf(5)
- Configuration file for guacd
- gv-update-userconfig(1)
- update ~/.gv config file
- h2o.conf(5)
- The configuration file for H2O, the optimized HTTP/1.x, HTTP/2 server
- helpers.conf(5)
- Slurm configuration file for the helpers plugin
- heretic.cfg(5)
- Chocolate Heretic configuration file
- hesiod.conf(5)
- Configuration file for the Hesiod library
- hexen.cfg(5)
- Chocolate Hexen configuration file
- hgrc(5)
- configuration files for Mercurial rst2man-indent-level 0 1 rstReportMargin $1
- hitch.conf(5), Hitch.conf(5)
- Configuration file for Hitch
- hlmaster.gameserver(1), "hlmaster.gameserver" "(1)
- How to configure your gameserver to send heartbeats to hlmaster."
- hmrc(4)
- Hypermail configuration file
- hook_config_section(3)
- Hooks a configuration file section with custom handlers. Allegro game programming library
- host-setup(1)
- System configuration setup/management utility
- hosts.cfg(5)
- Main Xymon configuration file
- hosts.conf(5)
- Access control for Network UPS Tools CGI programs
- html2psrc(5)
- configuration file format for html2ps(1)
- hugo-config(1)
- Display site configuration
- hugo-config-mounts(1)
- Print the configured file mounts
- hwlocality_configuration(3)
- Topology Detection Configuration and Query
- i3-config-wizard(1)
- creates a keysym based config based on your layout
- i3-migrate-config-to-v4(1)
- migrates your i3 config file
- iamb(5), config.toml(5)
- configuration file for iamb
- iauth.conf(5)
- The Internet Relay Chat Authentication Configuration File
- ibus(5), IBUS(5)
- dconf database file for IBus
- ibus-setup(1)
- configuration program for ibus
- icmconf(7)
- Configuration file for the icmbuild(1) program maintenance script
- icu-config(1)
- output ICU build options
- idn.conf(5), .idnrc(5), idnalias.conf(5)
- configuration files for idnkit library
- idn2.conf(5), .idn2rc(5)
- configuration files for idnkit version 2
- idnalias.conf(5)
- encoding alias file for idnkit
- idnconv(1)
- codeset converter for named.conf and zone master files
- idnlang.conf(5)
- language alias file for idnkit
- idzebra-abs2dom(1)
- Converts .abs files to DOM XML configuration files
- idzebra-config(1)
- Script to get information about idzebra
- ifdata(1)
- get network interface info without parsing ifconfig output
- ifstated.conf(5)
- Interface State daemon configuration file
- igmpproxy.conf(5)
- Configuration file for igmpproxy (8) multicast daemon
- ijs-config(1)
- script to get information about the installed version of ijs
- iked.conf(5)
- IKEv2 configuration file
- imapd.conf(5)
- Cyrus IMAP documentation IMAP configuration file
- imapfilter_config(5)
- imapfilter configuration file
- imv(5)
- imv configuration file
- inadyn.conf(5)
- inadyn DDNS client configuration file
- incoming.conf(5)
- Configuration of incoming news feeds
- incron.conf(5), /usr/local/usr/local/etc/incron.conf(5)
- main config file for inotify cron (incron)
- influxd-config(1)
- Generate configuration files for InfluxDB
- influxd-run(1)
- Configure and start an InfluxDB server
- initexmf(1)
- MiKTeX configuration utility
- inn-radius.conf(5)
- Configuration for nnrpd RADIUS authenticator
- inn-secrets.conf(5)
- Configuration data for InterNetNews secrets
- inn.conf(5)
- Configuration data for InterNetNews programs
- inncheck(8)
- Check INN configuration and database files
- innconfval(1)
- Get configuration parameters from configuration files
- innfeed.conf(5)
- Configuration file for innfeed
- innreport.conf(5)
- Configuration file for innreport
- innupgrade(8)
- Upgrade INN configuration files
- io.elementary.terminal(1)
- Modern terminal emulator from elementary project Pantheon Terminal is a beautiful and simple terminal emulator. It's designed to be set up with sane defaults and little to no configuration and follows the elementary OS Human Interface Guidelines
- iodbc-config(1)
- script to get information about the installed version of iODBC
- iolimits.cfg(5)
- local I/O limiting configuration
- ipa-client-automount(1)
- Configure automount and NFS for IPA
- ipa-client-install(1)
- Configure an IPA client
- ipa-client-samba(1)
- Configure Samba file server on an IPA client
- ipa.conf(5)
- -- ipa(8) configuration file
- ipastat.conf(5)
- -- ipastat(8) configuration file
- ipcad.conf(5)
- ipcad configuration file
- ipmi-config(8)
- configure IPMI values
- ipmi-config.conf(5), ipmi-config(5)
- IPMI configuration file details
- ipmi_lan(5), ipmi/lan.conf(5)
- IPMI LAN Interface config file
- ipmidetect.conf(5)
- specify alternate default values for the ipmidetect library
- ipmidetectd.conf(5)
- ipmidetectd configuration file
- ipmiseld.conf(5)
- ipmiseld configuration file
- ipsec.conf(5)
- IPsec configuration and connections
- ipsec_readwriteconf(8)
- validate and output an Libreswan IPsec configuration file
- ipup(1)
- ipdb - ipdb-update.sh - Tools for generating IP based Geo-blocking and Geo-routing tables in order to configure the system's firewall and/or routing facilities .sp
- ipv6mon.conf(5)
- Configuration file for the IPv6 address monitoring daemon (ipv6mon)
- ipv6toolkit.conf(5)
- Configuration file for the SI6 Networks' IPv6 address monitoring daemon (ipv6mon)
- ircdwatch(8)
- Daemon for monitoring ircd and ircd.conf
- irs.conf(5)
- Information Retrieval System configuration file
- isns_config(5)
- iSNS configuration file
- jadm(8), JADM (jail admin)(8)
- FreeBSD jail framework with vnet, zfs and /etc/jail.conf support
- janus-cfgconv(1)
- Janus config file conversion utility
- javavm_opts.conf(5)
- the Java VM wrapper options configuration file
- javavms(5)
- the Java VM wrapper configuration file
- jira-init(7)
- Init initializes jira config
- jira-me(7)
- Displays configured jira user
- job_container.conf(5)
- Slurm configuration file for job_container/tmpfs plugin
- jose_cfg(3)
- José Configuration
- json2xml(1)
- translates JSON documents conforming to a YANG data model into XML
- jstest-gtk(1)
- joystick testing and configuration tool
- kamailio(8)
- a very fast and configurable SIP server
- kamailio.cfg(5)
- kamailio configuration file
- kanshi(1)
- dynamic output configuration
- kanshi(5)
- configuration file
- kbuildsycoca5(8)
- Rebuilds the KService desktop file system configuration cache
- kdb5_ldap_util(8)
- Kerberos configuration utility
- kdc.conf(5)
- Kerberos V5 KDC configuration file The kdc.conf file supplements %krb5.conf for programs which are typically only used on a KDC, such as the %krb5kdc and %kadmind daemons and the %kdb5_util program. Relations documented here may also be specified in krb5.conf; for the KDC programs mentioned, krb5.conf and kdc.conf will be merged into a single configuration profile. Normally, the kdc.conf file is found in the KDC state directory, /usr/local/var/krb5kdc. You can override the default location by setting the environment variable KRB5_KDC_PROFILE. Please note that you need to restart the KDC daemon for any configuration changes to take effect
- kea-netconf(8)
- NETCONF agent for configuring Kea - "System Message: ERROR/3 (kea-netconf.8.rst:, line 11)" Unknown directive type (dqiscman(dq. 0.0 3.5 .. iscman:: kea-netconf
- kf5-config(1)
- Prints Qt(TM) and Frameworks installation paths
- khard.conf(5)
- configuration file for khard
- kismet.conf(5)
- Wireless sniffing and monitoring configuration file
- kismet_drone.conf(5)
- Wireless sniffing and monitoring drone configuration file
- knet_handle_crypto_set_config(3)
- set up packet cryptographic signing & encryption
- knet_handle_crypto_use_config(3)
- specify crypto configuration to use for TX
- knet_link_clear_config(3)
- Clear link information and disconnect the link
- knet_link_get_config(3)
- Get the link configutation information
- knet_link_set_config(3)
- Configure the link to a host
- knl.conf(5)
- Slurm configuration file for Intel Knights Landing processor
- knot.conf(5)
- Knot DNS configuration file
- kplot_get_datacfg(3)
- get data configurations for a plot
- kplot_get_plotcfg(3)
- get configuration for a plot
- krb5-config(1)
- tool for linking against MIT Kerberos libraries
- krb5.conf(5)
- Kerberos configuration file The krb5.conf file contains Kerberos configuration information, including the locations of KDCs and admin servers for the Kerberos realms of interest, defaults for the current realm and for Kerberos applications, and mappings of hostnames onto Kerberos realms. Normally, you should install your krb5.conf file in the directory /etc. You can override the default location by setting the environment variable KRB5_CONFIG. Multiple colon-separated filenames may be specified in KRB5_CONFIG; all files which are present will be read. Starting in release 1.14, directory names can also be specified in KRB5_CONFIG; all files within the directory whose names consist solely of alphanumeric characters, dashes, or underscores will be read
- krb5_add_et_list(3), krb5_add_extra_addresses(3), krb5_add_ignore_addresses(3), krb5_context(3), krb5_free_config_files(3), krb5_free_context(3), krb5_get_default_config_files(3), krb5_get_dns_canonize_hostname(3), krb5_get_extra_addresses(3), krb5_get_fcache_version(3), krb5_get_ignore_addresses(3), krb5_get_kdc_sec_offset(3), krb5_get_max_time_skew(3), krb5_get_use_admin_kdc krb5_init_context(3), krb5_init_ets(3), krb5_prepend_config_files(3), krb5_prepend_config_files_default(3), krb5_set_config_files(3), krb5_set_dns_canonize_hostname(3), krb5_set_extra_addresses(3), krb5_set_fcache_version(3), krb5_set_ignore_addresses(3), krb5_set_max_time_skew(3), krb5_set_use_admin_kdc(3)
- create, modify and delete krb5_context structures
- krb5_appdefault_boolean(3), krb5_appdefault_string(3), krb5_appdefault_time(3)
- get application configuration value
- krb5_crypto_getblocksize(3), krb5_crypto_getconfoundersize krb5_crypto_getenctype(3), krb5_crypto_getpadsize(3), krb5_crypto_overhead(3), krb5_decrypt(3), krb5_decrypt_EncryptedData(3), krb5_decrypt_ivec(3), krb5_decrypt_ticket(3), krb5_encrypt(3), krb5_encrypt_EncryptedData(3), krb5_encrypt_ivec(3), krb5_enctype_disable(3), krb5_enctype_keysize(3), krb5_enctype_to_string(3), krb5_enctype_valid(3), krb5_get_wrapped_length(3), krb5_string_to_enctype(3)
- encrypt and decrypt data, set and get encryption type parameters
- kutil_openlog(3)
- configure log message sink
- kyua-config(1), kyua config(1)
- Inspects the values of the loaded configuration
- kyua.conf(5)
- Configuration file for the kyua tool
- l2tpd.conf(5)
- L2TPD configuration file
- labwc-config(5), labwc(5)
- configuration files
- lament(6)
- animates the Lament Configuration
- latd.conf(5)
- LAT configuration file
- lcdproc-config(5)
- format of LCDproc's configuration files
- lcovrc(5)
- lcov configuration file
- ldap.conf(5), .ldaprc(5)
- LDAP configuration file/environment variables
- ldap_alias_manager.conf(5)
- Configuration of LDAP alias management
- ldap_table(5)
- Postfix LDAP client configuration
- ldns-config(1)
- show compiler and linker flags for ldns usage
- ldns-resolver(1)
- tries to create a resolver from a resolv.conf file
- lepton-upcfg(1)
- Lepton EDA configuration upgrade utility
- lftp.conf(5)
- the global configuration file for lftp
- lg.conf(5)
- looking glass configuration file
- lib3ds-config(1)
- script to get information about the installed version of lib3ds
- libao.conf(5)
- configuration for libao
- libinput-list-devices(1)
- list local devices as recognized by libinput and default values of their configuration
- libipmiconsole.conf(5)
- specify default values for libipmiconsole
- libmikmod-config(1)
- script to get information about the installed version of libmikmod
- libowfat_fmt_iso8601(3), fmt_iso8601(3)
- write a date in ASCII conforming to ISO-8601
