Skip site navigation (1)Skip section navigation (2)

Site Navigation

FreeBSD Manual Pages

home | help

BUS_BIND_INTR(9), bus_bind_intr(9): bind an interrupt resource to a specific CPU
BUS_GET_CPUS(9), bus_get_cpus(9): request a set of device-specific CPUs
CPUSET_FSET(9), cpuset(9)(9): CPUSET_T_INITIALIZER, CPUSET_FSET, CPU_CLR, CPU_COPY, CPU_ISSET, CPU_SET, CPU_ZERO, CPU_FILL, CPU_SETOF, CPU_EMPTY, CPU_ISFULLSET, CPU_FFS, CPU_COUNT, CPU_SUBSET, CPU_OVERLAP, CPU_CMP, CPU_OR, CPU_ORNOT, CPU_AND, CPU_ANDNOT, CPU_XOR, CPU_CLR_ATOMIC, CPU_SET_ATOMIC, CPU_SET_ATOMIC_ACQ, CPU_AND_ATOMIC, CPU_OR_ATOMIC, CPU_COPY_STORE_REL cpuset manipulation macros
CPU_ELAN(4): AMD Elan 520 CPU support
OF_getprop(9), OF_getproplen(9), OF_getencprop(9), OF_hasprop(9), OF_searchprop(9), OF_searchencprop(9), OF_getprop_alloc(9), OF_getencprop_alloc(9), OF_getprop_alloc_multi(9), OF_getencprop_alloc_multi(9), OF_prop_free(9), OF_nextprop(9), OF_setprop(9): access properties of device tree node
Q_QADDI(3), Q_QDIVI(3), Q_QMULI(3), Q_QSUBI(3), Q_QFRACI(3), Q_QCPYVALI(3): fixed-point math functions which apply integers to a Q number
Q_QADDQ(3), Q_QDIVQ(3), Q_QMULQ(3), Q_QSUBQ(3), Q_NORMPREC(3), Q_QMAXQ(3), Q_QMINQ(3), Q_QCLONEQ(3), Q_CPYVALQ(3): fixed-point math functions which operate on two Q numbers
acpi(4): Advanced Configuration and Power Management support
acpi_asus(4): Asus Laptop Extras
acpi_asus_wmi(4): Asus Laptop WMI Extras
acpi_battery(4): ACPI battery management subsystem
acpi_dock(4): Laptop Docking Station device driver
acpi_fujitsu(4): Fujitsu Laptop Extras
acpi_ged(4): ACPI Generic Event Device
acpi_hp(4): ACPI extras driver for HP laptops
acpi_ibm(4): ThinkPad ACPI extras driver
acpi_panasonic(4): ACPI hotkey driver for Panasonic laptops
acpi_rapidstart(4): Intel rapid start technology ACPI driver
acpi_sony(4): ACPI notebook controller driver for Sony laptops
acpi_thermal(4): ACPI thermal management subsystem
acpi_toshiba(4): Toshiba HCI interface
acpi_video(4): ACPI Video Extensions driver
acpi_wmi(4): ACPI to WMI mapping driver
acpiconf(8): control ACPI power management
acpidb(8): ACPI DSDT debugger
acpidump(8): dump ACPI tables and ASL
aesni(4): driver for the AES and SHA accelerator on x86 CPUs
aibs(4): ASUSTeK AI Booster ACPI ATK0110 voltage, temperature and fan sensor
archive_read_support_format_7zip(3), archive_read_support_format_all(3), archive_read_support_format_ar(3), archive_read_support_format_by_code(3), archive_read_support_format_cab(3), archive_read_support_format_cpio(3), archive_read_support_format_empty(3), archive_read_support_format_iso9660(3), archive_read_support_format_lha(3), archive_read_support_format_mtree(3), archive_read_support_format_rar(3), archive_read_support_format_raw(3), archive_read_support_format_tar(3), archive_read_support_format_xar(3), archive_read_support_format_zip(3): functions for reading streaming archives
archive_write_set_format(3), archive_write_set_format_7zip(3), archive_write_set_format_ar(3), archive_write_set_format_ar_bsd(3), archive_write_set_format_ar_svr4(3), archive_write_set_format_by_name(3), archive_write_set_format_cpio(3), archive_write_set_format_cpio_bin(3), archive_write_set_format_cpio_newc(3), archive_write_set_format_cpio_odc(3), archive_write_set_format_cpio_pwb(3), archive_write_set_format_filter_by_ext(3), archive_write_set_format_filter_by_ext_def(3), archive_write_set_format_gnutar(3), archive_write_set_format_iso9660(3), archive_write_set_format_mtree(3), archive_write_set_format_mtree_classic(3), archive_write_set_format_mtree_default(3), archive_write_set_format_pax(3), archive_write_set_format_pax_restricted(3), archive_write_set_format_raw(3), archive_write_set_format_shar(3), archive_write_set_format_shar_dump(3), archive_write_set_format_ustar(3), archive_write_set_format_v7tar(3), archive_write_set_format_warc(3), archive_write_set_format_xar(3), archive_write_set_format_zip(3): functions for creating archives
armv8crypto(4): driver for the AES accelerator on ARM CPUs
bcmp(3), bcopy(3), bzero(3), memccpy(3), memchr(3), memcmp(3), memcpy(3), memmove(3), memset(3): byte string operations
blackhole(4): a sysctl(8) MIB for manipulating behaviour in respect of refused SCTP, TCP, or UDP connection attempts
callout_active(9), callout_deactivate(9), callout_async_drain(9), callout_drain(9), callout_init(9), callout_init_mtx(9), callout_init_rm(9), callout_init_rw(9), callout_pending(9), callout_reset(9), callout_reset_curcpu(9), callout_reset_on(9), callout_reset_sbt(9), callout_reset_sbt_curcpu(9), callout_reset_sbt_on(9), callout_schedule(9), callout_schedule_curcpu(9), callout_schedule_on(9), callout_schedule_sbt(9), callout_schedule_sbt_curcpu(9), callout_schedule_sbt_on(9), callout_stop(9), callout_when(9): execute a function after a specified length of time
cc_dctcp(4): DCTCP Congestion Control Algorithm
cc_htcp(4): H-TCP Congestion Control Algorithm
cimag(3), cimagf(3), cimagl(3), conj(3), conjf(3), conjl(3), cproj(3), cprojf(3), cprojl(3), creal(3), crealf(3), creall(3): functions to manipulate complex numbers
clock_getcpuclockid(3): access a process CPU-time clock
cp(1): copy files
cp2112(4): driver for a USB GPIO and I2C peripheral device
cpio(1): copy files to and from archives
cpio(5): format of cpio archive files
cpow(3), cpowf(3), cpowl(3): complex power functions
cpu_machdep(9), cpu_copy_thread(9), cpu_exec_vmspace_reuse(9), cpu_exit(9), cpu_fetch_syscall_args(9), cpu_fork(9), cpu_fork_kthread_handler(9), cpu_idle(9), cpu_idle_wakeup(9), cpu_procctl(9), cpu_set_syscall_retval(9), cpu_set_upcall(9), cpu_set_user_tls(9), cpu_switch(9), cpu_sync_core(9), cpu_thread_alloc(9), cpu_thread_clean(9), cpu_thread_exit(9), cpu_thread_free(9), cpu_throw(9): machine-dependent interfaces to handle CPU and thread state
cpucontrol(8): control utility for the cpuctl(4) device
cpuctl(4): cpuctl pseudo device
cpufreq(4): CPU frequency control framework
cpuset(1): configure processor sets
cpuset(2), cpuset_getid(2), cpuset_setid(2): manage CPU affinity sets
cpuset_getaffinity(2), cpuset_setaffinity(2): manage CPU affinity
cpuset_getdomain(2), cpuset_setdomain(2): manage memory domain policy
cpuset_parselist(3): utility functions for cpuset(2) handling
curpriority_cmp(9), maybe_resched(9), resetpriority(9), roundrobin(9), roundrobin_interval(9), sched_setup(9), schedclock(9), schedcpu(9), setrunnable(9), updatepri(9): perform round-robin scheduling of runnable processes
curs_print(3), %mcprint(3): write binary data to printer using terminfo capabilities
dhclient(8): Dynamic Host Configuration Protocol (DHCP) client
dhclient-script(8): DHCP client network configuration script
dhclient.conf(5): DHCP client configuration file
dhclient.leases(5): DHCP client lease database
dhcp-options(5): Dynamic Host Configuration Protocol options
dpcpu(9): Kernel Dynamic Per-CPU Memory Allocator
dtrace_lockstat(4): a DTrace provider for tracing CPU scheduling events
dtrace_sched(4): a DTrace provider for tracing CPU scheduling events
dtrace_tcp(4): a DTrace provider for tracing events related to the tcp(4) protocol
get_cyclecount(9): get the CPU's fast counter register contents
getrpcport(3): get RPC port number
iasl(8): Intel ACPI compiler/decompiler
ipfwpcap(8): copy diverted packets to a file in tcpdump format
kvm_dpcpu_setcpu(3), kvm_getmaxcpu(3), kvm_getpcpu(3): access per-CPU data
kvm_getcptime(3): fetch global CPU time statistics
libtacplus(3): TACACS+ client library
memccpy(3): copy string until character found
memcpy(3): copy byte string
nc(1): arbitrary TCP and UDP connections and listens
netfpga10g_nf10bmac(4): driver for the NetFPGA-10G Embedded CPU Ethernet Core
nfe(4): NVIDIA nForce MCP Ethernet driver
ng_tcpmss(4): netgraph node to adjust TCP MSS option
nss_tacplus(8): TACACS+ nsswitch module
nvdimm(4): ACPI NVDIMM driver
pam_tacplus(8): TACACS+ authentication PAM module
perfmon(4): CPU performance-monitoring interface
pmc.atom(3): measurement events for Intel Atom family CPUs
pmc.atomsilvermont(3): measurement events for Intel Atom Silvermont family CPUs
pmc.core(3): measurement events for Intel Core Solo and Core Duo family CPUs
pmc.core2(3): measurement events for Intel Core2 family CPUs
pmc.corei7(3): measurement events for Intel Core i7 and Xeon 5500 family CPUs
pmc.corei7uc(3): uncore measurement events for Intel Core i7 and Xeon 5500 family CPUs
pmc.haswell(3): measurement events for Intel Haswell family CPUs
pmc.haswelluc(3): uncore measurement events for Intel Haswell family CPUs
pmc.haswellxeon(3): measurement events for Intel Haswell Xeon family CPUs
pmc.ivybridge(3): measurement events for Intel Ivy Bridge family CPUs
pmc.ivybridgexeon(3): measurement events for Intel Ivy Bridge Xeon family CPUs
pmc.k7(3): measurement events for AMD Athlon (K7 family) CPUs
pmc.k8(3): measurement events for AMD Athlon 64 (K8 family) CPUs
pmc.sandybridge(3): measurement events for Intel Sandy Bridge family CPUs
pmc.sandybridgeuc(3): uncore measurement events for Intel Sandy Bridge family CPUs
pmc.sandybridgexeon(3): measurement events for Intel Sandy Bridge Xeon family CPUs
pmc.westmere(3): measurement events for Intel Westmere family CPUs
pmc.westmere(3): uncore measurement events for Intel Westmere family CPUs
pmc_capabilities(3), pmc_cpuinfo(3), pmc_ncpu(3), pmc_npmc(3), pmc_pmcinfo(3), pmc_width(3): retrieve information about performance monitoring counters
pmc_name_of_capability(3), pmc_name_of_class(3), pmc_name_of_cputype(3), pmc_name_of_disposition(3), pmc_name_of_event(3), pmc_name_of_mode(3), pmc_name_of_state(3): human readable names for numeric constants used by pmc(3) and hwpmc(4)
pthread_attr_getaffinity_np(3), pthread_attr_setaffinity_np(3): manage CPU affinity in thread attribute objects
pthread_getaffinity_np(3), pthread_setaffinity_np(3): manage CPU affinity
pthread_getcpuclockid(3): access a thread CPU-time clock
rmail(8): handle remote mail received via uucp
rpc_soc(3), auth_destroy(3), authnone_create(3), authunix_create(3), authunix_create_default(3), callrpc(3), clnt_broadcast(3), clnt_call(3), clnt_control(3), clnt_create(3), clnt_destroy(3), clnt_freeres(3), clnt_geterr(3), clnt_pcreateerror(3), clnt_perrno(3), clnt_perror(3), clnt_spcreateerror(3), clnt_sperrno(3), clnt_sperror(3), clntraw_create(3), clnttcp_create(3), clntudp_bufcreate(3), clntudp_create(3), clntunix_create(3), get_myaddress(3), pmap_getmaps(3), pmap_getport(3), pmap_rmtcall(3), pmap_set(3), pmap_unset(3), registerrpc(3), rpc_createerr(3), svc_destroy(3), svc_fds(3), svc_fdset(3), svc_getargs(3), svc_getcaller(3), svc_getreq(3), svc_getreqset(3), svc_register(3), svc_run(3), svc_sendreply(3), svc_unregister(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3), svcfd_create(3), svcunixfd_create(3), svcraw_create(3), svcunix_create(3), xdr_accepted_reply(3), xdr_authunix_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_pmap(3), xdr_pmaplist(3), xdr_rejected_reply(3), xdr_replymsg(3), xprt_register(3), xprt_unregister(3): library routines for remote procedure calls
sbuf(9), sbuf_new(9), sbuf_new_auto(9), sbuf_new_for_sysctl(9), sbuf_clear(9), sbuf_get_flags(9), sbuf_set_flags(9), sbuf_clear_flags(9), sbuf_setpos(9), sbuf_bcat(9), sbuf_bcopyin(9), sbuf_bcpy(9), sbuf_cat(9), sbuf_copyin(9), sbuf_cpy(9), sbuf_nl_terminate(9), sbuf_printf(9), sbuf_vprintf(9), sbuf_putc(9), sbuf_set_drain(9), sbuf_trim(9), sbuf_error(9), sbuf_finish(9), sbuf_data(9), sbuf_len(9), sbuf_done(9), sbuf_delete(9), sbuf_start_section(9), sbuf_end_section(9), sbuf_hexdump(9), sbuf_printf_drain(9), sbuf_putbuf(9): safe string composition
sched_getcpu(3): get current CPU
scp(1): OpenSSH secure file copy
setac(3), endac(3), getacdir(3), getacdist(3), getacexpire(3), getacfilesz(3), getacflg(3), getachost(3), getacmin(3), getacna(3), getacpol(3), au_poltostr(3), au_strtopol(3): look up information from the audit_control database
setclasscontext(3), setclasscpumask(3), setclassenvironment(3), setclassresources(3), setusercontext(3): functions for using the login class capabilities database
siftr(4), SIFTR(4): Statistical Information For TCP Research
snmp_value_free(3), snmp_value_parse(3), snmp_value_copy(3), snmp_pdu_free(3), snmp_pdu_decode(3), snmp_pdu_encode(3), snmp_pdu_decode_header(3), snmp_pdu_decode_scoped(3), snmp_pdu_decode_secmode(3), snmp_pdu_init_secparams(3), snmp_pdu_dump(3), snmp_passwd_to_keys(3), snmp_get_local_keys(3), snmp_calc_keychange(3), TRUTH_MK(3), TRUTH_GET(3), TRUTH_OK(3): SNMP decoding and encoding library
stpcpy(3), stpncpy(3), strcpy(3), strncpy(3): copy strings
stpcpy(3), strcat(3), strncat(3), strchr(3), strrchr(3), strcmp(3), strncmp(3), strcasecmp(3), strncasecmp(3), strcpy(3), strncpy(3), strerror(3), strlen(3), strpbrk(3), strsep(3), strspn(3), strcspn(3), strstr(3), strtok(3), index(3), rindex(3): string specific functions
strlcpy(3), strlcat(3): size-bounded string copying and concatenation
syncache(4), syncookies(4): sysctl(8) MIBs for controlling TCP SYN caching
tacplus.conf(5): TACACS+ client configuration file
tcp(4): Internet Transmission Control Protocol
tcp_bbr(4): TCP Bottleneck Bandwidth and Round-Trip Time Algorithm
tcp_functions(9): Alternate TCP Stack Framework
tcp_rack(4): TCP RACK-TLP Loss Detection Algorithm for TCP
tcpd(8): access control facility for internet services
tcpdchk(8): tcp wrapper configuration checker
tcpdmatch(8): tcp wrapper oracle
tcpdrop(8): drop TCP connections
tcpdump(1): dump traffic on a network
tcpsso(8): set a socket option on a TCP endpoint
top(1): display and update information about the top cpu processes
uslcom(4): Silicon Laboratories CP2101/CP2102/CP2103/CP2104/CP2105 based USB serial adapter
wdatwd(4): device driver for the ACPI WDAT based watchdog interrupt timer
wmemchr(3), wmemcmp(3), wmemcpy(3), wmemmove(3), wmempcpy(3), wmemset(3), wcpcpy(3), wcpncpy(3), wcscasecmp(3), wcscat(3), wcschr(3), wcscmp(3), wcscpy(3), wcscspn(3), wcsdup(3), wcslcat(3), wcslcpy(3), wcslen(3), wcsncasecmp(3), wcsncat(3), wcsncmp(3), wcsncpy(3), wcsnlen(3), wcspbrk(3), wcsrchr(3), wcsspn(3), wcsstr(3): wide character string manipulation operations
zzz(8): suspend an ACPI or APM system
BN_mod_mul_reciprocal(3), BN_div_recp(3), BN_RECP_CTX_new(3), BN_RECP_CTX_free(3), BN_RECP_CTX_set(3): modular multiplication using reciprocal
DECLARE_ASN1_FUNCTIONS(3), IMPLEMENT_ASN1_FUNCTIONS(3), ASN1_ITEM(3), ACCESS_DESCRIPTION_free(3), ACCESS_DESCRIPTION_new(3), ADMISSIONS_free(3), ADMISSIONS_new(3), ADMISSION_SYNTAX_free(3), ADMISSION_SYNTAX_new(3), ASIdOrRange_free(3), ASIdOrRange_new(3), ASIdentifierChoice_free(3), ASIdentifierChoice_new(3), ASIdentifiers_free(3), ASIdentifiers_new(3), ASRange_free(3), ASRange_new(3), AUTHORITY_INFO_ACCESS_free(3), AUTHORITY_INFO_ACCESS_new(3), AUTHORITY_KEYID_free(3), AUTHORITY_KEYID_new(3), BASIC_CONSTRAINTS_free(3), BASIC_CONSTRAINTS_new(3), CERTIFICATEPOLICIES_free(3), CERTIFICATEPOLICIES_new(3), CMS_ContentInfo_free(3), CMS_ContentInfo_new(3), CMS_ContentInfo_new_ex(3), CMS_ContentInfo_print_ctx(3), CMS_ReceiptRequest_free(3), CMS_ReceiptRequest_new(3), CRL_DIST_POINTS_free(3), CRL_DIST_POINTS_new(3), DIRECTORYSTRING_free(3), DIRECTORYSTRING_new(3), DISPLAYTEXT_free(3), DISPLAYTEXT_new(3), DIST_POINT_NAME_free(3), DIST_POINT_NAME_new(3), DIST_POINT_free(3), DIST_POINT_new(3), DSAparams_dup(3), ECPARAMETERS_free(3), ECPARAMETERS_new(3), ECPKPARAMETERS_free(3), ECPKPARAMETERS_new(3), EDIPARTYNAME_free(3), EDIPARTYNAME_new(3), ESS_CERT_ID_dup(3), ESS_CERT_ID_free(3), ESS_CERT_ID_new(3), ESS_CERT_ID_V2_dup(3), ESS_CERT_ID_V2_free(3), ESS_CERT_ID_V2_new(3), ESS_ISSUER_SERIAL_dup(3), ESS_ISSUER_SERIAL_free(3), ESS_ISSUER_SERIAL_new(3), ESS_SIGNING_CERT_dup(3), ESS_SIGNING_CERT_free(3), ESS_SIGNING_CERT_it(3), ESS_SIGNING_CERT_new(3), ESS_SIGNING_CERT_V2_dup(3), ESS_SIGNING_CERT_V2_free(3), ESS_SIGNING_CERT_V2_it(3), ESS_SIGNING_CERT_V2_new(3), EXTENDED_KEY_USAGE_free(3), EXTENDED_KEY_USAGE_new(3), GENERAL_NAMES_free(3), GENERAL_NAMES_new(3), GENERAL_NAME_dup(3), GENERAL_NAME_free(3), GENERAL_NAME_new(3), GENERAL_SUBTREE_free(3), GENERAL_SUBTREE_new(3), IPAddressChoice_free(3), IPAddressChoice_new(3), IPAddressFamily_free(3), IPAddressFamily_new(3), IPAddressOrRange_free(3), IPAddressOrRange_new(3), IPAddressRange_free(3), IPAddressRange_new(3), ISSUER_SIGN_TOOL_free(3), ISSUER_SIGN_TOOL_it(3), ISSUER_SIGN_TOOL_new(3), ISSUING_DIST_POINT_free(3), ISSUING_DIST_POINT_it(3), ISSUING_DIST_POINT_new(3), NAME_CONSTRAINTS_free(3), NAME_CONSTRAINTS_new(3), NAMING_AUTHORITY_free(3), NAMING_AUTHORITY_new(3), NETSCAPE_CERT_SEQUENCE_free(3), NETSCAPE_CERT_SEQUENCE_new(3), NETSCAPE_SPKAC_free(3), NETSCAPE_SPKAC_new(3), NETSCAPE_SPKI_free(3), NETSCAPE_SPKI_new(3), NOTICEREF_free(3), NOTICEREF_new(3), OCSP_BASICRESP_free(3), OCSP_BASICRESP_new(3), OCSP_CERTID_dup(3), OCSP_CERTID_new(3), OCSP_CERTSTATUS_free(3), OCSP_CERTSTATUS_new(3), OCSP_CRLID_free(3), OCSP_CRLID_new(3), OCSP_ONEREQ_free(3), OCSP_ONEREQ_new(3), OCSP_REQINFO_free(3), OCSP_REQINFO_new(3), OCSP_RESPBYTES_free(3), OCSP_RESPBYTES_new(3), OCSP_RESPDATA_free(3), OCSP_RESPDATA_new(3), OCSP_RESPID_free(3), OCSP_RESPID_new(3), OCSP_RESPONSE_new(3), OCSP_REVOKEDINFO_free(3), OCSP_REVOKEDINFO_new(3), OCSP_SERVICELOC_free(3), OCSP_SERVICELOC_new(3), OCSP_SIGNATURE_free(3), OCSP_SIGNATURE_new(3), OCSP_SINGLERESP_free(3), OCSP_SINGLERESP_new(3), OSSL_CMP_ITAV_dup(3), OSSL_CMP_ITAV_free(3), OSSL_CMP_MSG_dup(3), OSSL_CMP_MSG_it(3), OSSL_CMP_MSG_free(3), OSSL_CMP_PKIHEADER_free(3), OSSL_CMP_PKIHEADER_it(3), OSSL_CMP_PKIHEADER_new(3), OSSL_CMP_PKISI_dup(3), OSSL_CMP_PKISI_free(3), OSSL_CMP_PKISI_it(3), OSSL_CMP_PKISI_new(3), OSSL_CMP_PKISTATUS_it(3), OSSL_CRMF_CERTID_dup(3), OSSL_CRMF_CERTID_free(3), OSSL_CRMF_CERTID_it(3), OSSL_CRMF_CERTID_new(3), OSSL_CRMF_CERTTEMPLATE_free(3), OSSL_CRMF_CERTTEMPLATE_it(3), OSSL_CRMF_CERTTEMPLATE_new(3), OSSL_CRMF_ENCRYPTEDVALUE_free(3), OSSL_CRMF_ENCRYPTEDVALUE_it(3), OSSL_CRMF_ENCRYPTEDVALUE_new(3), OSSL_CRMF_MSGS_free(3), OSSL_CRMF_MSGS_it(3), OSSL_CRMF_MSGS_new(3), OSSL_CRMF_MSG_dup(3), OSSL_CRMF_MSG_free(3), OSSL_CRMF_MSG_it(3), OSSL_CRMF_MSG_new(3), OSSL_CRMF_PBMPARAMETER_free(3), OSSL_CRMF_PBMPARAMETER_it(3), OSSL_CRMF_PBMPARAMETER_new(3), OSSL_CRMF_PKIPUBLICATIONINFO_free(3), OSSL_CRMF_PKIPUBLICATIONINFO_it(3), OSSL_CRMF_PKIPUBLICATIONINFO_new(3), OSSL_CRMF_SINGLEPUBINFO_free(3), OSSL_CRMF_SINGLEPUBINFO_it(3), OSSL_CRMF_SINGLEPUBINFO_new(3), OTHERNAME_free(3), OTHERNAME_new(3), PBE2PARAM_free(3), PBE2PARAM_new(3), PBEPARAM_free(3), PBEPARAM_new(3), PBKDF2PARAM_free(3), PBKDF2PARAM_new(3), PKCS12_BAGS_free(3), PKCS12_BAGS_new(3), PKCS12_MAC_DATA_free(3), PKCS12_MAC_DATA_new(3), PKCS12_SAFEBAG_free(3), PKCS12_SAFEBAG_new(3), PKCS12_free(3), PKCS12_new(3), PKCS7_DIGEST_free(3), PKCS7_DIGEST_new(3), PKCS7_ENCRYPT_free(3), PKCS7_ENCRYPT_new(3), PKCS7_ENC_CONTENT_free(3), PKCS7_ENC_CONTENT_new(3), PKCS7_ENVELOPE_free(3), PKCS7_ENVELOPE_new(3), PKCS7_ISSUER_AND_SERIAL_free(3), PKCS7_ISSUER_AND_SERIAL_new(3), PKCS7_RECIP_INFO_free(3), PKCS7_RECIP_INFO_new(3), PKCS7_SIGNED_free(3), PKCS7_SIGNED_new(3), PKCS7_SIGNER_INFO_free(3), PKCS7_SIGNER_INFO_new(3), PKCS7_SIGN_ENVELOPE_free(3), PKCS7_SIGN_ENVELOPE_new(3), PKCS7_dup(3), PKCS7_free(3), PKCS7_new_ex(3), PKCS7_new(3), PKCS7_print_ctx(3), PKCS8_PRIV_KEY_INFO_free(3), PKCS8_PRIV_KEY_INFO_new(3), PKEY_USAGE_PERIOD_free(3), PKEY_USAGE_PERIOD_new(3), POLICYINFO_free(3), POLICYINFO_new(3), POLICYQUALINFO_free(3), POLICYQUALINFO_new(3), POLICY_CONSTRAINTS_free(3), POLICY_CONSTRAINTS_new(3), POLICY_MAPPING_free(3), POLICY_MAPPING_new(3), PROFESSION_INFOS_free(3), PROFESSION_INFOS_new(3), PROFESSION_INFO_free(3), PROFESSION_INFO_new(3), PROXY_CERT_INFO_EXTENSION_free(3), PROXY_CERT_INFO_EXTENSION_new(3), PROXY_POLICY_free(3), PROXY_POLICY_new(3), RSAPrivateKey_dup(3), RSAPublicKey_dup(3), RSA_OAEP_PARAMS_free(3), RSA_OAEP_PARAMS_new(3), RSA_PSS_PARAMS_free(3), RSA_PSS_PARAMS_new(3), RSA_PSS_PARAMS_dup(3), SCRYPT_PARAMS_free(3), SCRYPT_PARAMS_new(3), SXNETID_free(3), SXNETID_new(3), SXNET_free(3), SXNET_new(3), TLS_FEATURE_free(3), TLS_FEATURE_new(3), TS_ACCURACY_dup(3), TS_ACCURACY_free(3), TS_ACCURACY_new(3), TS_MSG_IMPRINT_dup(3), TS_MSG_IMPRINT_free(3), TS_MSG_IMPRINT_new(3), TS_REQ_dup(3), TS_REQ_free(3), TS_REQ_new(3), TS_RESP_dup(3), TS_RESP_free(3), TS_RESP_new(3), TS_STATUS_INFO_dup(3), TS_STATUS_INFO_free(3), TS_STATUS_INFO_new(3), TS_TST_INFO_dup(3), TS_TST_INFO_free(3), TS_TST_INFO_new(3), USERNOTICE_free(3), USERNOTICE_new(3), X509_ALGOR_free(3), X509_ALGOR_it(3), X509_ALGOR_new(3), X509_ATTRIBUTE_dup(3), X509_ATTRIBUTE_free(3), X509_ATTRIBUTE_new(3), X509_CERT_AUX_free(3), X509_CERT_AUX_new(3), X509_CINF_free(3), X509_CINF_new(3), X509_CRL_INFO_free(3), X509_CRL_INFO_new(3), X509_CRL_dup(3), X509_CRL_free(3), X509_CRL_new_ex(3), X509_CRL_new(3), X509_EXTENSION_dup(3), X509_EXTENSION_free(3), X509_EXTENSION_new(3), X509_NAME_ENTRY_dup(3), X509_NAME_ENTRY_free(3), X509_NAME_ENTRY_new(3), X509_NAME_dup(3), X509_NAME_free(3), X509_NAME_new(3), X509_REQ_INFO_free(3), X509_REQ_INFO_new(3), X509_REQ_dup(3), X509_REQ_free(3), X509_REQ_new(3), X509_REQ_new_ex(3), X509_REVOKED_dup(3), X509_REVOKED_free(3), X509_REVOKED_new(3), X509_SIG_free(3), X509_SIG_new(3), X509_VAL_free(3), X509_VAL_new(3), X509_dup(3): ASN1 object utilities
DECLARE_PEM_rw(3), PEM_read_CMS(3), PEM_read_bio_CMS(3), PEM_write_CMS(3), PEM_write_bio_CMS(3), PEM_write_DHxparams(3), PEM_write_bio_DHxparams(3), PEM_read_ECPKParameters(3), PEM_read_bio_ECPKParameters(3), PEM_write_ECPKParameters(3), PEM_write_bio_ECPKParameters(3), PEM_read_ECPrivateKey(3), PEM_write_ECPrivateKey(3), PEM_write_bio_ECPrivateKey(3), PEM_read_EC_PUBKEY(3), PEM_read_bio_EC_PUBKEY(3), PEM_write_EC_PUBKEY(3), PEM_write_bio_EC_PUBKEY(3), PEM_read_NETSCAPE_CERT_SEQUENCE(3), PEM_read_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_write_NETSCAPE_CERT_SEQUENCE(3), PEM_write_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_read_PKCS8(3), PEM_read_bio_PKCS8(3), PEM_write_PKCS8(3), PEM_write_bio_PKCS8(3), PEM_write_PKCS8_PRIV_KEY_INFO(3), PEM_read_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_PKCS8_PRIV_KEY_INFO(3), PEM_write_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_SSL_SESSION(3), PEM_read_bio_SSL_SESSION(3), PEM_write_SSL_SESSION(3), PEM_write_bio_SSL_SESSION(3), PEM_read_X509_PUBKEY(3), PEM_read_bio_X509_PUBKEY(3), PEM_write_X509_PUBKEY(3), PEM_write_bio_X509_PUBKEY(3): PEM object encoding routines
ECPKParameters_print(3), ECPKParameters_print_fp(3): Functions for decoding and encoding ASN1 representations of elliptic curve entities
EC_GROUP_get_ecparameters(3), EC_GROUP_get_ecpkparameters(3), EC_GROUP_new_from_params(3), EC_GROUP_new_from_ecparameters(3), EC_GROUP_new_from_ecpkparameters(3), EC_GROUP_new(3), EC_GROUP_free(3), EC_GROUP_clear_free(3), EC_GROUP_new_curve_GFp(3), EC_GROUP_new_curve_GF2m(3), EC_GROUP_new_by_curve_name_ex(3), EC_GROUP_new_by_curve_name(3), EC_GROUP_set_curve(3), EC_GROUP_get_curve(3), EC_GROUP_set_curve_GFp(3), EC_GROUP_get_curve_GFp(3), EC_GROUP_set_curve_GF2m(3), EC_GROUP_get_curve_GF2m(3), EC_get_builtin_curves(3), OSSL_EC_curve_nid2name(3): Functions for creating and destroying EC_GROUP objects
OPENSSL_malloc_init(3), OPENSSL_malloc(3), OPENSSL_zalloc(3), OPENSSL_realloc(3), OPENSSL_free(3), OPENSSL_clear_realloc(3), OPENSSL_clear_free(3), OPENSSL_cleanse(3), CRYPTO_malloc(3), CRYPTO_zalloc(3), CRYPTO_realloc(3), CRYPTO_free(3), OPENSSL_strdup(3), OPENSSL_strndup(3), OPENSSL_memdup(3), OPENSSL_strlcpy(3), OPENSSL_strlcat(3), CRYPTO_strdup(3), CRYPTO_strndup(3), OPENSSL_mem_debug_push(3), OPENSSL_mem_debug_pop(3), CRYPTO_mem_debug_push(3), CRYPTO_mem_debug_pop(3), CRYPTO_clear_realloc(3), CRYPTO_clear_free(3), CRYPTO_malloc_fn(3), CRYPTO_realloc_fn(3), CRYPTO_free_fn(3), CRYPTO_get_mem_functions(3), CRYPTO_set_mem_functions(3), CRYPTO_get_alloc_counts(3), CRYPTO_set_mem_debug(3), CRYPTO_mem_ctrl(3), CRYPTO_mem_leaks(3), CRYPTO_mem_leaks_fp(3), CRYPTO_mem_leaks_cb(3), OPENSSL_MALLOC_FAILURES(3), OPENSSL_MALLOC_FD(3): Memory allocation functions
d2i_ACCESS_DESCRIPTION(3), d2i_ADMISSIONS(3), d2i_ADMISSION_SYNTAX(3), d2i_ASIdOrRange(3), d2i_ASIdentifierChoice(3), d2i_ASIdentifiers(3), d2i_ASN1_BIT_STRING(3), d2i_ASN1_BMPSTRING(3), d2i_ASN1_ENUMERATED(3), d2i_ASN1_GENERALIZEDTIME(3), d2i_ASN1_GENERALSTRING(3), d2i_ASN1_IA5STRING(3), d2i_ASN1_INTEGER(3), d2i_ASN1_NULL(3), d2i_ASN1_OBJECT(3), d2i_ASN1_OCTET_STRING(3), d2i_ASN1_PRINTABLE(3), d2i_ASN1_PRINTABLESTRING(3), d2i_ASN1_SEQUENCE_ANY(3), d2i_ASN1_SET_ANY(3), d2i_ASN1_T61STRING(3), d2i_ASN1_TIME(3), d2i_ASN1_TYPE(3), d2i_ASN1_UINTEGER(3), d2i_ASN1_UNIVERSALSTRING(3), d2i_ASN1_UTCTIME(3), d2i_ASN1_UTF8STRING(3), d2i_ASN1_VISIBLESTRING(3), d2i_ASRange(3), d2i_AUTHORITY_INFO_ACCESS(3), d2i_AUTHORITY_KEYID(3), d2i_BASIC_CONSTRAINTS(3), d2i_CERTIFICATEPOLICIES(3), d2i_CMS_ContentInfo(3), d2i_CMS_ReceiptRequest(3), d2i_CMS_bio(3), d2i_CRL_DIST_POINTS(3), d2i_DHxparams(3), d2i_DIRECTORYSTRING(3), d2i_DISPLAYTEXT(3), d2i_DIST_POINT(3), d2i_DIST_POINT_NAME(3), d2i_DSA_SIG(3), d2i_ECDSA_SIG(3), d2i_ECPKParameters(3), d2i_EDIPARTYNAME(3), d2i_ESS_CERT_ID(3), d2i_ESS_CERT_ID_V2(3), d2i_ESS_ISSUER_SERIAL(3), d2i_ESS_SIGNING_CERT(3), d2i_ESS_SIGNING_CERT_V2(3), d2i_EXTENDED_KEY_USAGE(3), d2i_GENERAL_NAME(3), d2i_GENERAL_NAMES(3), d2i_IPAddressChoice(3), d2i_IPAddressFamily(3), d2i_IPAddressOrRange(3), d2i_IPAddressRange(3), d2i_ISSUER_SIGN_TOOL(3), d2i_ISSUING_DIST_POINT(3), d2i_NAMING_AUTHORITY(3), d2i_NETSCAPE_CERT_SEQUENCE(3), d2i_NETSCAPE_SPKAC(3), d2i_NETSCAPE_SPKI(3), d2i_NOTICEREF(3), d2i_OCSP_BASICRESP(3), d2i_OCSP_CERTID(3), d2i_OCSP_CERTSTATUS(3), d2i_OCSP_CRLID(3), d2i_OCSP_ONEREQ(3), d2i_OCSP_REQINFO(3), d2i_OCSP_REQUEST(3), d2i_OCSP_RESPBYTES(3), d2i_OCSP_RESPDATA(3), d2i_OCSP_RESPID(3), d2i_OCSP_RESPONSE(3), d2i_OCSP_REVOKEDINFO(3), d2i_OCSP_SERVICELOC(3), d2i_OCSP_SIGNATURE(3), d2i_OCSP_SINGLERESP(3), d2i_OSSL_CMP_MSG(3), d2i_OSSL_CMP_PKIHEADER(3), d2i_OSSL_CMP_PKISI(3), d2i_OSSL_CRMF_CERTID(3), d2i_OSSL_CRMF_CERTTEMPLATE(3), d2i_OSSL_CRMF_ENCRYPTEDVALUE(3), d2i_OSSL_CRMF_MSG(3), d2i_OSSL_CRMF_MSGS(3), d2i_OSSL_CRMF_PBMPARAMETER(3), d2i_OSSL_CRMF_PKIPUBLICATIONINFO(3), d2i_OSSL_CRMF_SINGLEPUBINFO(3), d2i_OTHERNAME(3), d2i_PBE2PARAM(3), d2i_PBEPARAM(3), d2i_PBKDF2PARAM(3), d2i_PKCS12(3), d2i_PKCS12_BAGS(3), d2i_PKCS12_MAC_DATA(3), d2i_PKCS12_SAFEBAG(3), d2i_PKCS12_bio(3), d2i_PKCS12_fp(3), d2i_PKCS7(3), d2i_PKCS7_DIGEST(3), d2i_PKCS7_ENCRYPT(3), d2i_PKCS7_ENC_CONTENT(3), d2i_PKCS7_ENVELOPE(3), d2i_PKCS7_ISSUER_AND_SERIAL(3), d2i_PKCS7_RECIP_INFO(3), d2i_PKCS7_SIGNED(3), d2i_PKCS7_SIGNER_INFO(3), d2i_PKCS7_SIGN_ENVELOPE(3), d2i_PKCS7_bio(3), d2i_PKCS7_fp(3), d2i_PKCS8_PRIV_KEY_INFO(3), d2i_PKCS8_PRIV_KEY_INFO_bio(3), d2i_PKCS8_PRIV_KEY_INFO_fp(3), d2i_PKCS8_bio(3), d2i_PKCS8_fp(3), d2i_PKEY_USAGE_PERIOD(3), d2i_POLICYINFO(3), d2i_POLICYQUALINFO(3), d2i_PROFESSION_INFO(3), d2i_PROXY_CERT_INFO_EXTENSION(3), d2i_PROXY_POLICY(3), d2i_RSA_OAEP_PARAMS(3), d2i_RSA_PSS_PARAMS(3), d2i_SCRYPT_PARAMS(3), d2i_SCT_LIST(3), d2i_SXNET(3), d2i_SXNETID(3), d2i_TS_ACCURACY(3), d2i_TS_MSG_IMPRINT(3), d2i_TS_MSG_IMPRINT_bio(3), d2i_TS_MSG_IMPRINT_fp(3), d2i_TS_REQ(3), d2i_TS_REQ_bio(3), d2i_TS_REQ_fp(3), d2i_TS_RESP(3), d2i_TS_RESP_bio(3), d2i_TS_RESP_fp(3), d2i_TS_STATUS_INFO(3), d2i_TS_TST_INFO(3), d2i_TS_TST_INFO_bio(3), d2i_TS_TST_INFO_fp(3), d2i_USERNOTICE(3), d2i_X509(3), d2i_X509_bio(3), d2i_X509_fp(3), d2i_X509_ALGOR(3), d2i_X509_ALGORS(3), d2i_X509_ATTRIBUTE(3), d2i_X509_CERT_AUX(3), d2i_X509_CINF(3), d2i_X509_CRL(3), d2i_X509_CRL_INFO(3), d2i_X509_CRL_bio(3), d2i_X509_CRL_fp(3), d2i_X509_EXTENSION(3), d2i_X509_EXTENSIONS(3), d2i_X509_NAME(3), d2i_X509_NAME_ENTRY(3), d2i_X509_PUBKEY(3), d2i_X509_PUBKEY_bio(3), d2i_X509_PUBKEY_fp(3), d2i_X509_REQ(3), d2i_X509_REQ_INFO(3), d2i_X509_REQ_bio(3), d2i_X509_REQ_fp(3), d2i_X509_REVOKED(3), d2i_X509_SIG(3), d2i_X509_VAL(3), i2d_ACCESS_DESCRIPTION(3), i2d_ADMISSIONS(3), i2d_ADMISSION_SYNTAX(3), i2d_ASIdOrRange(3), i2d_ASIdentifierChoice(3), i2d_ASIdentifiers(3), i2d_ASN1_BIT_STRING(3), i2d_ASN1_BMPSTRING(3), i2d_ASN1_ENUMERATED(3), i2d_ASN1_GENERALIZEDTIME(3), i2d_ASN1_GENERALSTRING(3), i2d_ASN1_IA5STRING(3), i2d_ASN1_INTEGER(3), i2d_ASN1_NULL(3), i2d_ASN1_OBJECT(3), i2d_ASN1_OCTET_STRING(3), i2d_ASN1_PRINTABLE(3), i2d_ASN1_PRINTABLESTRING(3), i2d_ASN1_SEQUENCE_ANY(3), i2d_ASN1_SET_ANY(3), i2d_ASN1_T61STRING(3), i2d_ASN1_TIME(3), i2d_ASN1_TYPE(3), i2d_ASN1_UNIVERSALSTRING(3), i2d_ASN1_UTCTIME(3), i2d_ASN1_UTF8STRING(3), i2d_ASN1_VISIBLESTRING(3), i2d_ASN1_bio_stream(3), i2d_ASRange(3), i2d_AUTHORITY_INFO_ACCESS(3), i2d_AUTHORITY_KEYID(3), i2d_BASIC_CONSTRAINTS(3), i2d_CERTIFICATEPOLICIES(3), i2d_CMS_ContentInfo(3), i2d_CMS_ReceiptRequest(3), i2d_CMS_bio(3), i2d_CRL_DIST_POINTS(3), i2d_DHxparams(3), i2d_DIRECTORYSTRING(3), i2d_DISPLAYTEXT(3), i2d_DIST_POINT(3), i2d_DIST_POINT_NAME(3), i2d_DSA_SIG(3), i2d_ECDSA_SIG(3), i2d_ECPKParameters(3), i2d_EDIPARTYNAME(3), i2d_ESS_CERT_ID(3), i2d_ESS_CERT_ID_V2(3), i2d_ESS_ISSUER_SERIAL(3), i2d_ESS_SIGNING_CERT(3), i2d_ESS_SIGNING_CERT_V2(3), i2d_EXTENDED_KEY_USAGE(3), i2d_GENERAL_NAME(3), i2d_GENERAL_NAMES(3), i2d_IPAddressChoice(3), i2d_IPAddressFamily(3), i2d_IPAddressOrRange(3), i2d_IPAddressRange(3), i2d_ISSUER_SIGN_TOOL(3), i2d_ISSUING_DIST_POINT(3), i2d_NAMING_AUTHORITY(3), i2d_NETSCAPE_CERT_SEQUENCE(3), i2d_NETSCAPE_SPKAC(3), i2d_NETSCAPE_SPKI(3), i2d_NOTICEREF(3), i2d_OCSP_BASICRESP(3), i2d_OCSP_CERTID(3), i2d_OCSP_CERTSTATUS(3), i2d_OCSP_CRLID(3), i2d_OCSP_ONEREQ(3), i2d_OCSP_REQINFO(3), i2d_OCSP_REQUEST(3), i2d_OCSP_RESPBYTES(3), i2d_OCSP_RESPDATA(3), i2d_OCSP_RESPID(3), i2d_OCSP_RESPONSE(3), i2d_OCSP_REVOKEDINFO(3), i2d_OCSP_SERVICELOC(3), i2d_OCSP_SIGNATURE(3), i2d_OCSP_SINGLERESP(3), i2d_OSSL_CMP_MSG(3), i2d_OSSL_CMP_PKIHEADER(3), i2d_OSSL_CMP_PKISI(3), i2d_OSSL_CRMF_CERTID(3), i2d_OSSL_CRMF_CERTTEMPLATE(3), i2d_OSSL_CRMF_ENCRYPTEDVALUE(3), i2d_OSSL_CRMF_MSG(3), i2d_OSSL_CRMF_MSGS(3), i2d_OSSL_CRMF_PBMPARAMETER(3), i2d_OSSL_CRMF_PKIPUBLICATIONINFO(3), i2d_OSSL_CRMF_SINGLEPUBINFO(3), i2d_OTHERNAME(3), i2d_PBE2PARAM(3), i2d_PBEPARAM(3), i2d_PBKDF2PARAM(3), i2d_PKCS12(3), i2d_PKCS12_BAGS(3), i2d_PKCS12_MAC_DATA(3), i2d_PKCS12_SAFEBAG(3), i2d_PKCS12_bio(3), i2d_PKCS12_fp(3), i2d_PKCS7(3), i2d_PKCS7_DIGEST(3), i2d_PKCS7_ENCRYPT(3), i2d_PKCS7_ENC_CONTENT(3), i2d_PKCS7_ENVELOPE(3), i2d_PKCS7_ISSUER_AND_SERIAL(3), i2d_PKCS7_NDEF(3), i2d_PKCS7_RECIP_INFO(3), i2d_PKCS7_SIGNED(3), i2d_PKCS7_SIGNER_INFO(3), i2d_PKCS7_SIGN_ENVELOPE(3), i2d_PKCS7_bio(3), i2d_PKCS7_fp(3), i2d_PKCS8PrivateKeyInfo_bio(3), i2d_PKCS8PrivateKeyInfo_fp(3), i2d_PKCS8_PRIV_KEY_INFO(3), i2d_PKCS8_PRIV_KEY_INFO_bio(3), i2d_PKCS8_PRIV_KEY_INFO_fp(3), i2d_PKCS8_bio(3), i2d_PKCS8_fp(3), i2d_PKEY_USAGE_PERIOD(3), i2d_POLICYINFO(3), i2d_POLICYQUALINFO(3), i2d_PROFESSION_INFO(3), i2d_PROXY_CERT_INFO_EXTENSION(3), i2d_PROXY_POLICY(3), i2d_RSA_OAEP_PARAMS(3), i2d_RSA_PSS_PARAMS(3), i2d_SCRYPT_PARAMS(3), i2d_SCT_LIST(3), i2d_SXNET(3), i2d_SXNETID(3), i2d_TS_ACCURACY(3), i2d_TS_MSG_IMPRINT(3), i2d_TS_MSG_IMPRINT_bio(3), i2d_TS_MSG_IMPRINT_fp(3), i2d_TS_REQ(3), i2d_TS_REQ_bio(3), i2d_TS_REQ_fp(3), i2d_TS_RESP(3), i2d_TS_RESP_bio(3), i2d_TS_RESP_fp(3), i2d_TS_STATUS_INFO(3), i2d_TS_TST_INFO(3), i2d_TS_TST_INFO_bio(3), i2d_TS_TST_INFO_fp(3), i2d_USERNOTICE(3), i2d_X509(3), i2d_X509_bio(3), i2d_X509_fp(3), i2d_X509_ALGOR(3), i2d_X509_ALGORS(3), i2d_X509_ATTRIBUTE(3), i2d_X509_CERT_AUX(3), i2d_X509_CINF(3), i2d_X509_CRL(3), i2d_X509_CRL_INFO(3), i2d_X509_CRL_bio(3), i2d_X509_CRL_fp(3), i2d_X509_EXTENSION(3), i2d_X509_EXTENSIONS(3), i2d_X509_NAME(3), i2d_X509_NAME_ENTRY(3), i2d_X509_PUBKEY(3), i2d_X509_PUBKEY_bio(3), i2d_X509_PUBKEY_fp(3), i2d_X509_REQ(3), i2d_X509_REQ_INFO(3), i2d_X509_REQ_bio(3), i2d_X509_REQ_fp(3), i2d_X509_REVOKED(3), i2d_X509_SIG(3), i2d_X509_VAL(3): convert objects from/to ASN.1/DER representation
d2i_DSAPrivateKey(3), d2i_DSAPrivateKey_bio(3), d2i_DSAPrivateKey_fp(3), d2i_DSAPublicKey(3), d2i_DSA_PUBKEY(3), d2i_DSA_PUBKEY_bio(3), d2i_DSA_PUBKEY_fp(3), d2i_DSAparams(3), d2i_RSAPrivateKey(3), d2i_RSAPrivateKey_bio(3), d2i_RSAPrivateKey_fp(3), d2i_RSAPublicKey(3), d2i_RSAPublicKey_bio(3), d2i_RSAPublicKey_fp(3), d2i_RSA_PUBKEY(3), d2i_RSA_PUBKEY_bio(3), d2i_RSA_PUBKEY_fp(3), d2i_DHparams(3), d2i_DHparams_bio(3), d2i_DHparams_fp(3), d2i_ECParameters(3), d2i_ECPrivateKey(3), d2i_ECPrivateKey_bio(3), d2i_ECPrivateKey_fp(3), d2i_EC_PUBKEY(3), d2i_EC_PUBKEY_bio(3), d2i_EC_PUBKEY_fp(3), i2d_RSAPrivateKey(3), i2d_RSAPrivateKey_bio(3), i2d_RSAPrivateKey_fp(3), i2d_RSAPublicKey(3), i2d_RSAPublicKey_bio(3), i2d_RSAPublicKey_fp(3), i2d_RSA_PUBKEY(3), i2d_RSA_PUBKEY_bio(3), i2d_RSA_PUBKEY_fp(3), i2d_DHparams(3), i2d_DHparams_bio(3), i2d_DHparams_fp(3), i2d_DSAPrivateKey(3), i2d_DSAPrivateKey_bio(3), i2d_DSAPrivateKey_fp(3), i2d_DSAPublicKey(3), i2d_DSA_PUBKEY(3), i2d_DSA_PUBKEY_bio(3), i2d_DSA_PUBKEY_fp(3), i2d_DSAparams(3), i2d_ECParameters(3), i2d_ECPrivateKey(3), i2d_ECPrivateKey_bio(3), i2d_ECPrivateKey_fp(3), i2d_EC_PUBKEY(3), i2d_EC_PUBKEY_bio(3), i2d_EC_PUBKEY_fp(3): DEPRECATED
openssl-cmds(1), asn1parse(1), ca(1), ciphers(1), cmp(1), cms(1), crl(1), crl2pkcs7(1), dgst(1), dhparam(1), dsa(1), dsaparam(1), ec(1), ecparam(1), enc(1), engine(1), errstr(1), gendsa(1), genpkey(1), genrsa(1), info(1), kdf(1), mac(1), nseq(1), ocsp(1), passwd(1), pkcs12(1), pkcs7(1), pkcs8(1), pkey(1), pkeyparam(1), pkeyutl(1), prime(1), rand(1), rehash(1), req(1), rsa(1), rsautl(1), s_client(1), s_server(1), s_time(1), sess_id(1), smime(1), speed(1), spkac(1), srp(1), storeutl(1), ts(1), verify(1), version(1), x509(1): OpenSSL application commands
openssl-ecparam(1): EC parameter manipulation and generation
AG_CPUInfo(3): agar architecture information structure
BIO_get_host_ip(3), BIO_get_port(3), BIO_get_accept_socket(3), BIO_accept(3), BIO_sock_error(3), BIO_sock_non_fatal_error(3), BIO_sock_should_retry(3), BIO_socket_nbio(3), BIO_set_tcp_ndelay(3): wrappers for socket operations
BN_mod_mul_reciprocal(3), BN_div_recp(3), BN_RECP_CTX_new(3), BN_RECP_CTX_free(3), BN_RECP_CTX_set(3): modular multiplication using reciprocal
BN_mod_mul_reciprocal(3ossl), BN_div_recp(3ossl), BN_RECP_CTX_new(3ossl), BN_RECP_CTX_free(3ossl), BN_RECP_CTX_set(3ossl): modular multiplication using reciprocal
Beep(3), Beep CDKallocStrings CDKcountStrings CDKfreeChtypes CDKfreeStrings CDKsplitString baseName ceilCDK chlen chstrncpy chtype2Char cleanChar cleanChtype cmpStrChstr copyChar copyCharList copyChtype copyChtypeList dirName floorCDK freeChar freeCharList freeChtype freeChtypeList intlen lenCharList lenChtypeList mode2Char searchList sortList cdk_misc(3): Cdk miscellaneous routines
CURLOPT_MAIL_RCPT(3): list of SMTP mail recipients
CURLOPT_MAIL_RCPT_ALLOWFAILS(3): allow RCPT TO command to fail for some recipients
CURLOPT_SSH_AUTH_TYPES(3): auth types for SFTP and SCP
CURLOPT_TCP_FASTOPEN(3): TCP Fast Open
CURLOPT_TCP_KEEPALIVE(3): TCP keep-alive probing
CURLOPT_TCP_KEEPCNT(3): Maximum number of TCP keep-alive probes
CURLOPT_TCP_KEEPIDLE(3): TCP keep-alive idle time wait
CURLOPT_TCP_KEEPINTVL(3): TCP keep-alive interval
CURLOPT_TCP_NODELAY(3): the TCP_NODELAY option
ConicProj(1): -- perform conic projections
DECLARE_ASN1_FUNCTIONS(3), IMPLEMENT_ASN1_FUNCTIONS(3), ASN1_ITEM(3), ACCESS_DESCRIPTION_free(3), ACCESS_DESCRIPTION_new(3), ADMISSIONS_free(3), ADMISSIONS_new(3), ADMISSION_SYNTAX_free(3), ADMISSION_SYNTAX_new(3), ASIdOrRange_free(3), ASIdOrRange_new(3), ASIdentifierChoice_free(3), ASIdentifierChoice_new(3), ASIdentifiers_free(3), ASIdentifiers_new(3), ASRange_free(3), ASRange_new(3), AUTHORITY_INFO_ACCESS_free(3), AUTHORITY_INFO_ACCESS_new(3), AUTHORITY_KEYID_free(3), AUTHORITY_KEYID_new(3), BASIC_CONSTRAINTS_free(3), BASIC_CONSTRAINTS_new(3), CERTIFICATEPOLICIES_free(3), CERTIFICATEPOLICIES_new(3), CMS_ContentInfo_free(3), CMS_ContentInfo_new(3), CMS_ContentInfo_print_ctx(3), CMS_ReceiptRequest_free(3), CMS_ReceiptRequest_new(3), CRL_DIST_POINTS_free(3), CRL_DIST_POINTS_new(3), DIRECTORYSTRING_free(3), DIRECTORYSTRING_new(3), DISPLAYTEXT_free(3), DISPLAYTEXT_new(3), DIST_POINT_NAME_free(3), DIST_POINT_NAME_new(3), DIST_POINT_free(3), DIST_POINT_new(3), DSAparams_dup(3), ECPARAMETERS_free(3), ECPARAMETERS_new(3), ECPKPARAMETERS_free(3), ECPKPARAMETERS_new(3), EDIPARTYNAME_free(3), EDIPARTYNAME_new(3), ESS_CERT_ID_dup(3), ESS_CERT_ID_free(3), ESS_CERT_ID_new(3), ESS_ISSUER_SERIAL_dup(3), ESS_ISSUER_SERIAL_free(3), ESS_ISSUER_SERIAL_new(3), ESS_SIGNING_CERT_dup(3), ESS_SIGNING_CERT_free(3), ESS_SIGNING_CERT_new(3), EXTENDED_KEY_USAGE_free(3), EXTENDED_KEY_USAGE_new(3), GENERAL_NAMES_free(3), GENERAL_NAMES_new(3), GENERAL_NAME_dup(3), GENERAL_NAME_free(3), GENERAL_NAME_new(3), GENERAL_SUBTREE_free(3), GENERAL_SUBTREE_new(3), IPAddressChoice_free(3), IPAddressChoice_new(3), IPAddressFamily_free(3), IPAddressFamily_new(3), IPAddressOrRange_free(3), IPAddressOrRange_new(3), IPAddressRange_free(3), IPAddressRange_new(3), ISSUING_DIST_POINT_free(3), ISSUING_DIST_POINT_new(3), NAME_CONSTRAINTS_free(3), NAME_CONSTRAINTS_new(3), NAMING_AUTHORITY_free(3), NAMING_AUTHORITY_new(3), NETSCAPE_CERT_SEQUENCE_free(3), NETSCAPE_CERT_SEQUENCE_new(3), NETSCAPE_SPKAC_free(3), NETSCAPE_SPKAC_new(3), NETSCAPE_SPKI_free(3), NETSCAPE_SPKI_new(3), NOTICEREF_free(3), NOTICEREF_new(3), OCSP_BASICRESP_free(3), OCSP_BASICRESP_new(3), OCSP_CERTID_dup(3), OCSP_CERTID_new(3), OCSP_CERTSTATUS_free(3), OCSP_CERTSTATUS_new(3), OCSP_CRLID_free(3), OCSP_CRLID_new(3), OCSP_ONEREQ_free(3), OCSP_ONEREQ_new(3), OCSP_REQINFO_free(3), OCSP_REQINFO_new(3), OCSP_RESPBYTES_free(3), OCSP_RESPBYTES_new(3), OCSP_RESPDATA_free(3), OCSP_RESPDATA_new(3), OCSP_RESPID_free(3), OCSP_RESPID_new(3), OCSP_RESPONSE_new(3), OCSP_REVOKEDINFO_free(3), OCSP_REVOKEDINFO_new(3), OCSP_SERVICELOC_free(3), OCSP_SERVICELOC_new(3), OCSP_SIGNATURE_free(3), OCSP_SIGNATURE_new(3), OCSP_SINGLERESP_free(3), OCSP_SINGLERESP_new(3), OTHERNAME_free(3), OTHERNAME_new(3), PBE2PARAM_free(3), PBE2PARAM_new(3), PBEPARAM_free(3), PBEPARAM_new(3), PBKDF2PARAM_free(3), PBKDF2PARAM_new(3), PKCS12_BAGS_free(3), PKCS12_BAGS_new(3), PKCS12_MAC_DATA_free(3), PKCS12_MAC_DATA_new(3), PKCS12_SAFEBAG_free(3), PKCS12_SAFEBAG_new(3), PKCS12_free(3), PKCS12_new(3), PKCS7_DIGEST_free(3), PKCS7_DIGEST_new(3), PKCS7_ENCRYPT_free(3), PKCS7_ENCRYPT_new(3), PKCS7_ENC_CONTENT_free(3), PKCS7_ENC_CONTENT_new(3), PKCS7_ENVELOPE_free(3), PKCS7_ENVELOPE_new(3), PKCS7_ISSUER_AND_SERIAL_free(3), PKCS7_ISSUER_AND_SERIAL_new(3), PKCS7_RECIP_INFO_free(3), PKCS7_RECIP_INFO_new(3), PKCS7_SIGNED_free(3), PKCS7_SIGNED_new(3), PKCS7_SIGNER_INFO_free(3), PKCS7_SIGNER_INFO_new(3), PKCS7_SIGN_ENVELOPE_free(3), PKCS7_SIGN_ENVELOPE_new(3), PKCS7_dup(3), PKCS7_free(3), PKCS7_new(3), PKCS7_print_ctx(3), PKCS8_PRIV_KEY_INFO_free(3), PKCS8_PRIV_KEY_INFO_new(3), PKEY_USAGE_PERIOD_free(3), PKEY_USAGE_PERIOD_new(3), POLICYINFO_free(3), POLICYINFO_new(3), POLICYQUALINFO_free(3), POLICYQUALINFO_new(3), POLICY_CONSTRAINTS_free(3), POLICY_CONSTRAINTS_new(3), POLICY_MAPPING_free(3), POLICY_MAPPING_new(3), PROFESSION_INFO_free(3), PROFESSION_INFO_new(3), PROFESSION_INFOS_free(3), PROFESSION_INFOS_new(3), PROXY_CERT_INFO_EXTENSION_free(3), PROXY_CERT_INFO_EXTENSION_new(3), PROXY_POLICY_free(3), PROXY_POLICY_new(3), RSAPrivateKey_dup(3), RSAPublicKey_dup(3), RSA_OAEP_PARAMS_free(3), RSA_OAEP_PARAMS_new(3), RSA_PSS_PARAMS_free(3), RSA_PSS_PARAMS_new(3), SCRYPT_PARAMS_free(3), SCRYPT_PARAMS_new(3), SXNETID_free(3), SXNETID_new(3), SXNET_free(3), SXNET_new(3), TLS_FEATURE_free(3), TLS_FEATURE_new(3), TS_ACCURACY_dup(3), TS_ACCURACY_free(3), TS_ACCURACY_new(3), TS_MSG_IMPRINT_dup(3), TS_MSG_IMPRINT_free(3), TS_MSG_IMPRINT_new(3), TS_REQ_dup(3), TS_REQ_free(3), TS_REQ_new(3), TS_RESP_dup(3), TS_RESP_free(3), TS_RESP_new(3), TS_STATUS_INFO_dup(3), TS_STATUS_INFO_free(3), TS_STATUS_INFO_new(3), TS_TST_INFO_dup(3), TS_TST_INFO_free(3), TS_TST_INFO_new(3), USERNOTICE _free(3), USERNOTICE_new(3), X509_ALGOR_free(3), X509_ALGOR_new(3), X509_ATTRIBUTE_dup(3), X509_ATTRIBUTE_free(3), X509_ATTRIBUTE_new(3), X509_CERT_AUX_free(3), X509_CERT_AUX_new(3), X509_CINF_free(3), X509_CINF_new(3), X509_CRL_INFO_free(3), X509_CRL_INFO_new(3), X509_CRL_dup(3), X509_CRL_free(3), X509_CRL_new(3), X509_EXTENSION_dup(3), X509_EXTENSION_free(3), X509_EXTENSION_new(3), X509_NAME_ENTRY_dup(3), X509_NAME_ENTRY_free(3), X509_NAME_ENTRY_new(3), X509_NAME_dup(3), X509_NAME_free(3), X509_NAME_new(3), X509_REQ_INFO_free(3), X509_REQ_INFO_new(3), X509_REQ_dup(3), X509_REQ_free(3), X509_REQ_new(3), X509_REVOKED_dup(3), X509_REVOKED_free(3), X509_REVOKED_new(3), X509_SIG_free(3), X509_SIG_new(3), X509_VAL_free(3), X509_VAL_new(3), X509_dup(3): ASN1 object utilities
DECLARE_ASN1_FUNCTIONS(3ossl), IMPLEMENT_ASN1_FUNCTIONS(3ossl), ASN1_ITEM(3ossl), ACCESS_DESCRIPTION_free(3ossl), ACCESS_DESCRIPTION_new(3ossl), ADMISSIONS_free(3ossl), ADMISSIONS_new(3ossl), ADMISSION_SYNTAX_free(3ossl), ADMISSION_SYNTAX_new(3ossl), ASIdOrRange_free(3ossl), ASIdOrRange_new(3ossl), ASIdentifierChoice_free(3ossl), ASIdentifierChoice_new(3ossl), ASIdentifiers_free(3ossl), ASIdentifiers_new(3ossl), ASRange_free(3ossl), ASRange_new(3ossl), AUTHORITY_INFO_ACCESS_free(3ossl), AUTHORITY_INFO_ACCESS_new(3ossl), AUTHORITY_KEYID_free(3ossl), AUTHORITY_KEYID_new(3ossl), BASIC_CONSTRAINTS_free(3ossl), BASIC_CONSTRAINTS_new(3ossl), CERTIFICATEPOLICIES_free(3ossl), CERTIFICATEPOLICIES_new(3ossl), CMS_ContentInfo_free(3ossl), CMS_ContentInfo_new(3ossl), CMS_ContentInfo_new_ex(3ossl), CMS_ContentInfo_print_ctx(3ossl), CMS_EnvelopedData_it(3ossl), CMS_EnvelopedData_dup(3ossl), CMS_ReceiptRequest_free(3ossl), CMS_ReceiptRequest_new(3ossl), CMS_SignedData_free(3ossl), CMS_SignedData_new(3ossl), CRL_DIST_POINTS_free(3ossl), CRL_DIST_POINTS_new(3ossl), DIRECTORYSTRING_free(3ossl), DIRECTORYSTRING_new(3ossl), DISPLAYTEXT_free(3ossl), DISPLAYTEXT_new(3ossl), DIST_POINT_NAME_free(3ossl), DIST_POINT_NAME_new(3ossl), DIST_POINT_NAME_dup(3ossl), DIST_POINT_free(3ossl), DIST_POINT_new(3ossl), DSAparams_dup(3ossl), ECPARAMETERS_free(3ossl), ECPARAMETERS_new(3ossl), ECPKPARAMETERS_free(3ossl), ECPKPARAMETERS_new(3ossl), EDIPARTYNAME_free(3ossl), EDIPARTYNAME_new(3ossl), ESS_CERT_ID_dup(3ossl), ESS_CERT_ID_free(3ossl), ESS_CERT_ID_new(3ossl), ESS_CERT_ID_V2_dup(3ossl), ESS_CERT_ID_V2_free(3ossl), ESS_CERT_ID_V2_new(3ossl), ESS_ISSUER_SERIAL_dup(3ossl), ESS_ISSUER_SERIAL_free(3ossl), ESS_ISSUER_SERIAL_new(3ossl), ESS_SIGNING_CERT_dup(3ossl), ESS_SIGNING_CERT_free(3ossl), ESS_SIGNING_CERT_it(3ossl), ESS_SIGNING_CERT_new(3ossl), ESS_SIGNING_CERT_V2_dup(3ossl), ESS_SIGNING_CERT_V2_free(3ossl), ESS_SIGNING_CERT_V2_it(3ossl), ESS_SIGNING_CERT_V2_new(3ossl), EXTENDED_KEY_USAGE_free(3ossl), EXTENDED_KEY_USAGE_new(3ossl), GENERAL_NAMES_free(3ossl), GENERAL_NAMES_new(3ossl), GENERAL_NAME_dup(3ossl), GENERAL_NAME_free(3ossl), GENERAL_NAME_new(3ossl), GENERAL_SUBTREE_free(3ossl), GENERAL_SUBTREE_new(3ossl), OSSL_IETF_ATTR_SYNTAX_free(3ossl), OSSL_IETF_ATTR_SYNTAX_it(3ossl), OSSL_IETF_ATTR_SYNTAX_new(3ossl), IPAddressChoice_free(3ossl), IPAddressChoice_new(3ossl), IPAddressFamily_free(3ossl), IPAddressFamily_new(3ossl), IPAddressOrRange_free(3ossl), IPAddressOrRange_new(3ossl), IPAddressRange_free(3ossl), IPAddressRange_new(3ossl), ISSUER_SIGN_TOOL_free(3ossl), ISSUER_SIGN_TOOL_it(3ossl), ISSUER_SIGN_TOOL_new(3ossl), ISSUING_DIST_POINT_free(3ossl), ISSUING_DIST_POINT_it(3ossl), ISSUING_DIST_POINT_new(3ossl), NAME_CONSTRAINTS_free(3ossl), NAME_CONSTRAINTS_new(3ossl), NAMING_AUTHORITY_free(3ossl), NAMING_AUTHORITY_new(3ossl), NETSCAPE_CERT_SEQUENCE_free(3ossl), NETSCAPE_CERT_SEQUENCE_new(3ossl), NETSCAPE_SPKAC_free(3ossl), NETSCAPE_SPKAC_new(3ossl), NETSCAPE_SPKI_free(3ossl), NETSCAPE_SPKI_new(3ossl), NOTICEREF_free(3ossl), NOTICEREF_new(3ossl), OCSP_BASICRESP_free(3ossl), OCSP_BASICRESP_new(3ossl), OCSP_CERTID_dup(3ossl), OCSP_CERTID_new(3ossl), OCSP_CERTSTATUS_free(3ossl), OCSP_CERTSTATUS_new(3ossl), OCSP_CRLID_free(3ossl), OCSP_CRLID_new(3ossl), OCSP_ONEREQ_free(3ossl), OCSP_ONEREQ_new(3ossl), OCSP_REQINFO_free(3ossl), OCSP_REQINFO_new(3ossl), OCSP_RESPBYTES_free(3ossl), OCSP_RESPBYTES_new(3ossl), OCSP_RESPDATA_free(3ossl), OCSP_RESPDATA_new(3ossl), OCSP_RESPID_free(3ossl), OCSP_RESPID_new(3ossl), OCSP_RESPONSE_new(3ossl), OCSP_REVOKEDINFO_free(3ossl), OCSP_REVOKEDINFO_new(3ossl), OCSP_SERVICELOC_free(3ossl), OCSP_SERVICELOC_new(3ossl), OCSP_SIGNATURE_free(3ossl), OCSP_SIGNATURE_new(3ossl), OCSP_SINGLERESP_free(3ossl), OCSP_SINGLERESP_new(3ossl), OSSL_AA_DIST_POINT_free(3ossl), OSSL_AA_DIST_POINT_new(3ossl), OSSL_AA_DIST_POINT_it(3ossl), OSSL_ALLOWED_ATTRIBUTES_CHOICE_free(3ossl), OSSL_ALLOWED_ATTRIBUTES_CHOICE_new(3ossl), OSSL_ALLOWED_ATTRIBUTES_CHOICE_it(3ossl), OSSL_ALLOWED_ATTRIBUTES_ITEM_free(3ossl), OSSL_ALLOWED_ATTRIBUTES_ITEM_new(3ossl), OSSL_ALLOWED_ATTRIBUTES_ITEM_it(3ossl), OSSL_ALLOWED_ATTRIBUTES_SYNTAX_free(3ossl), OSSL_ALLOWED_ATTRIBUTES_SYNTAX_new(3ossl), OSSL_ALLOWED_ATTRIBUTES_SYNTAX_it(3ossl), OSSL_ATAV_free(3ossl), OSSL_ATAV_new(3ossl), OSSL_ATAV_it(3ossl), OSSL_ATTRIBUTE_DESCRIPTOR_free(3ossl), OSSL_ATTRIBUTE_DESCRIPTOR_new(3ossl), OSSL_ATTRIBUTE_DESCRIPTOR_it(3ossl), OSSL_ATTRIBUTE_MAPPING_free(3ossl), OSSL_ATTRIBUTE_MAPPING_new(3ossl), OSSL_ATTRIBUTE_MAPPING_it(3ossl), OSSL_ATTRIBUTE_MAPPINGS_free(3ossl), OSSL_ATTRIBUTE_MAPPINGS_new(3ossl), OSSL_ATTRIBUTE_MAPPINGS_it(3ossl), OSSL_ATTRIBUTE_TYPE_MAPPING_free(3ossl), OSSL_ATTRIBUTE_TYPE_MAPPING_new(3ossl), OSSL_ATTRIBUTE_TYPE_MAPPING_it(3ossl), OSSL_ATTRIBUTE_VALUE_MAPPING_free(3ossl), OSSL_ATTRIBUTE_VALUE_MAPPING_new(3ossl), OSSL_ATTRIBUTE_VALUE_MAPPING_it(3ossl), OSSL_ATTRIBUTES_SYNTAX_free(3ossl), OSSL_ATTRIBUTES_SYNTAX_it(3ossl), OSSL_ATTRIBUTES_SYNTAX_new(3ossl), OSSL_AUTHORITY_ATTRIBUTE_ID_SYNTAX_free(3ossl), OSSL_AUTHORITY_ATTRIBUTE_ID_SYNTAX_it(3ossl), OSSL_AUTHORITY_ATTRIBUTE_ID_SYNTAX_new(3ossl), OSSL_BASIC_ATTR_CONSTRAINTS_free(3ossl), OSSL_BASIC_ATTR_CONSTRAINTS_it(3ossl), OSSL_BASIC_ATTR_CONSTRAINTS_new(3ossl), OSSL_CMP_ATAVS_new(3ossl), OSSL_CMP_ATAVS_free(3ossl), OSSL_CMP_ATAVS_it(3ossl), OSSL_CMP_CRLSTATUS_free(3ossl), OSSL_CMP_ITAV_dup(3ossl), OSSL_CMP_ITAV_free(3ossl), OSSL_CMP_MSG_dup(3ossl), OSSL_CMP_MSG_it(3ossl), OSSL_CMP_MSG_free(3ossl), OSSL_CMP_PKIHEADER_free(3ossl), OSSL_CMP_PKIHEADER_it(3ossl), OSSL_CMP_PKIHEADER_new(3ossl), OSSL_CMP_PKISI_dup(3ossl), OSSL_CMP_PKISI_free(3ossl), OSSL_CMP_PKISI_it(3ossl), OSSL_CMP_PKISI_new(3ossl), OSSL_CMP_PKISTATUS_it(3ossl), OSSL_CRMF_CERTID_dup(3ossl), OSSL_CRMF_CERTID_free(3ossl), OSSL_CRMF_CERTID_it(3ossl), OSSL_CRMF_CERTID_new(3ossl), OSSL_CRMF_CERTTEMPLATE_free(3ossl), OSSL_CRMF_CERTTEMPLATE_it(3ossl), OSSL_CRMF_CERTTEMPLATE_new(3ossl), OSSL_CRMF_CERTTEMPLATE_dup(3ossl), OSSL_CRMF_ATTRIBUTETYPEANDVALUE_dup(3ossl), OSSL_CRMF_ATTRIBUTETYPEANDVALUE_free(3ossl), OSSL_CRMF_ENCRYPTEDKEY_free(3ossl), OSSL_CRMF_ENCRYPTEDKEY_it(3ossl), OSSL_CRMF_ENCRYPTEDKEY_new(3ossl), OSSL_CRMF_ENCRYPTEDVALUE_free(3ossl), OSSL_CRMF_ENCRYPTEDVALUE_it(3ossl), OSSL_CRMF_ENCRYPTEDVALUE_new(3ossl), OSSL_CRMF_MSGS_free(3ossl), OSSL_CRMF_MSGS_it(3ossl), OSSL_CRMF_MSGS_new(3ossl), OSSL_CRMF_MSG_dup(3ossl), OSSL_CRMF_MSG_free(3ossl), OSSL_CRMF_MSG_it(3ossl), OSSL_CRMF_MSG_new(3ossl), OSSL_CRMF_PBMPARAMETER_free(3ossl), OSSL_CRMF_PBMPARAMETER_it(3ossl), OSSL_CRMF_PBMPARAMETER_new(3ossl), OSSL_CRMF_PKIPUBLICATIONINFO_free(3ossl), OSSL_CRMF_PKIPUBLICATIONINFO_it(3ossl), OSSL_CRMF_PKIPUBLICATIONINFO_new(3ossl), OSSL_CRMF_SINGLEPUBINFO_free(3ossl), OSSL_CRMF_SINGLEPUBINFO_it(3ossl), OSSL_CRMF_SINGLEPUBINFO_new(3ossl), OSSL_DAY_TIME_free(3ossl), OSSL_DAY_TIME_new(3ossl), OSSL_DAY_TIME_it(3ossl), OSSL_DAY_TIME_BAND_free(3ossl), OSSL_DAY_TIME_BAND_new(3ossl), OSSL_DAY_TIME_BAND_it(3ossl), OSSL_HASH_free(3ossl), OSSL_HASH_it(3ossl), OSSL_HASH_new(3ossl), OSSL_INFO_SYNTAX_free(3ossl), OSSL_INFO_SYNTAX_it(3ossl), OSSL_INFO_SYNTAX_new(3ossl), OSSL_INFO_SYNTAX_POINTER_free(3ossl), OSSL_INFO_SYNTAX_POINTER_it(3ossl), OSSL_INFO_SYNTAX_POINTER_new(3ossl), OSSL_PRIVILEGE_POLICY_ID_free(3ossl), OSSL_PRIVILEGE_POLICY_ID_it(3ossl), OSSL_PRIVILEGE_POLICY_ID_new(3ossl), OSSL_TARGET_CERT_free(3ossl), OSSL_TARGET_CERT_it(3ossl), OSSL_TARGET_CERT_new(3ossl), OSSL_TARGET_free(3ossl), OSSL_TARGET_it(3ossl), OSSL_TARGET_new(3ossl), OSSL_TARGETING_INFORMATION_free(3ossl), OSSL_TARGETING_INFORMATION_it(3ossl), OSSL_TARGETING_INFORMATION_new(3ossl), OSSL_TARGETS_free(3ossl), OSSL_TARGETS_it(3ossl), OSSL_TARGETS_new(3ossl), OSSL_IETF_ATTR_SYNTAX_VALUE_free(3ossl), OSSL_IETF_ATTR_SYNTAX_VALUE_it(3ossl), OSSL_IETF_ATTR_SYNTAX_VALUE_new(3ossl), OSSL_ISSUER_SERIAL_free(3ossl), OSSL_ISSUER_SERIAL_new(3ossl), OSSL_NAMED_DAY_free(3ossl), OSSL_NAMED_DAY_new(3ossl), OSSL_NAMED_DAY_it(3ossl), OSSL_OBJECT_DIGEST_INFO_free(3ossl), OSSL_OBJECT_DIGEST_INFO_new(3ossl), OSSL_ROLE_SPEC_CERT_ID_free(3ossl), OSSL_ROLE_SPEC_CERT_ID_new(3ossl), OSSL_ROLE_SPEC_CERT_ID_it(3ossl), OSSL_ROLE_SPEC_CERT_ID_SYNTAX_free(3ossl), OSSL_ROLE_SPEC_CERT_ID_SYNTAX_new(3ossl), OSSL_ROLE_SPEC_CERT_ID_SYNTAX_it(3ossl), OSSL_TIME_PERIOD_free(3ossl), OSSL_TIME_PERIOD_new(3ossl), OSSL_TIME_PERIOD_it(3ossl), OSSL_TIME_SPEC_ABSOLUTE_free(3ossl), OSSL_TIME_SPEC_ABSOLUTE_new(3ossl), OSSL_TIME_SPEC_ABSOLUTE_it(3ossl), OSSL_TIME_SPEC_free(3ossl), OSSL_TIME_SPEC_new(3ossl), OSSL_TIME_SPEC_it(3ossl), OSSL_TIME_SPEC_DAY_free(3ossl), OSSL_TIME_SPEC_DAY_new(3ossl), OSSL_TIME_SPEC_DAY_it(3ossl), OSSL_TIME_SPEC_MONTH_free(3ossl), OSSL_TIME_SPEC_MONTH_new(3ossl), OSSL_TIME_SPEC_MONTH_it(3ossl), OSSL_TIME_SPEC_TIME_free(3ossl), OSSL_TIME_SPEC_TIME_new(3ossl), OSSL_TIME_SPEC_TIME_it(3ossl), OSSL_TIME_SPEC_WEEKS_free(3ossl), OSSL_TIME_SPEC_WEEKS_new(3ossl), OSSL_TIME_SPEC_WEEKS_it(3ossl), OSSL_TIME_SPEC_X_DAY_OF_free(3ossl), OSSL_TIME_SPEC_X_DAY_OF_new(3ossl), OSSL_TIME_SPEC_X_DAY_OF_it(3ossl), OSSL_USER_NOTICE_SYNTAX_free(3ossl), OSSL_USER_NOTICE_SYNTAX_new(3ossl), OSSL_USER_NOTICE_SYNTAX_it(3ossl), OTHERNAME_free(3ossl), OTHERNAME_new(3ossl), PBE2PARAM_free(3ossl), PBE2PARAM_new(3ossl), PBEPARAM_free(3ossl), PBEPARAM_new(3ossl), PBKDF2PARAM_free(3ossl), PBKDF2PARAM_new(3ossl), PBMAC1PARAM_free(3ossl), PBMAC1PARAM_it(3ossl), PBMAC1PARAM_new(3ossl), PKCS12_BAGS_free(3ossl), PKCS12_BAGS_new(3ossl), PKCS12_MAC_DATA_free(3ossl), PKCS12_MAC_DATA_new(3ossl), PKCS12_SAFEBAG_free(3ossl), PKCS12_SAFEBAG_new(3ossl), PKCS12_free(3ossl), PKCS12_new(3ossl), PKCS7_DIGEST_free(3ossl), PKCS7_DIGEST_new(3ossl), PKCS7_ENCRYPT_free(3ossl), PKCS7_ENCRYPT_new(3ossl), PKCS7_ENC_CONTENT_free(3ossl), PKCS7_ENC_CONTENT_new(3ossl), PKCS7_ENVELOPE_free(3ossl), PKCS7_ENVELOPE_new(3ossl), PKCS7_ISSUER_AND_SERIAL_free(3ossl), PKCS7_ISSUER_AND_SERIAL_new(3ossl), PKCS7_RECIP_INFO_free(3ossl), PKCS7_RECIP_INFO_new(3ossl), PKCS7_SIGNED_free(3ossl), PKCS7_SIGNED_new(3ossl), PKCS7_SIGNER_INFO_free(3ossl), PKCS7_SIGNER_INFO_new(3ossl), PKCS7_SIGN_ENVELOPE_free(3ossl), PKCS7_SIGN_ENVELOPE_new(3ossl), PKCS7_dup(3ossl), PKCS7_free(3ossl), PKCS7_new_ex(3ossl), PKCS7_new(3ossl), PKCS7_print_ctx(3ossl), PKCS8_PRIV_KEY_INFO_free(3ossl), PKCS8_PRIV_KEY_INFO_new(3ossl), PKEY_USAGE_PERIOD_free(3ossl), PKEY_USAGE_PERIOD_new(3ossl), POLICYINFO_free(3ossl), POLICYINFO_new(3ossl), POLICYQUALINFO_free(3ossl), POLICYQUALINFO_new(3ossl), POLICY_CONSTRAINTS_free(3ossl), POLICY_CONSTRAINTS_new(3ossl), POLICY_MAPPING_free(3ossl), POLICY_MAPPING_new(3ossl), PROFESSION_INFOS_free(3ossl), PROFESSION_INFOS_new(3ossl), PROFESSION_INFO_free(3ossl), PROFESSION_INFO_new(3ossl), PROXY_CERT_INFO_EXTENSION_free(3ossl), PROXY_CERT_INFO_EXTENSION_new(3ossl), PROXY_POLICY_free(3ossl), PROXY_POLICY_new(3ossl), RSAPrivateKey_dup(3ossl), RSAPublicKey_dup(3ossl), RSA_OAEP_PARAMS_free(3ossl), RSA_OAEP_PARAMS_new(3ossl), RSA_PSS_PARAMS_free(3ossl), RSA_PSS_PARAMS_new(3ossl), RSA_PSS_PARAMS_dup(3ossl), SCRYPT_PARAMS_free(3ossl), SCRYPT_PARAMS_new(3ossl), SXNETID_free(3ossl), SXNETID_new(3ossl), SXNET_free(3ossl), SXNET_new(3ossl), TLS_FEATURE_free(3ossl), TLS_FEATURE_new(3ossl), TS_ACCURACY_dup(3ossl), TS_ACCURACY_free(3ossl), TS_ACCURACY_new(3ossl), TS_MSG_IMPRINT_dup(3ossl), TS_MSG_IMPRINT_free(3ossl), TS_MSG_IMPRINT_new(3ossl), TS_REQ_dup(3ossl), TS_REQ_free(3ossl), TS_REQ_new(3ossl), TS_RESP_dup(3ossl), TS_RESP_free(3ossl), TS_RESP_new(3ossl), TS_STATUS_INFO_dup(3ossl), TS_STATUS_INFO_free(3ossl), TS_STATUS_INFO_new(3ossl), TS_TST_INFO_dup(3ossl), TS_TST_INFO_free(3ossl), TS_TST_INFO_new(3ossl), USERNOTICE_free(3ossl), USERNOTICE_new(3ossl), X509_ACERT_dup(3ossl), X509_ACERT_free(3ossl), X509_ACERT_it(3ossl), X509_ACERT_new(3ossl), X509_ACERT_INFO_free(3ossl), X509_ACERT_INFO_it(3ossl), X509_ACERT_INFO_new(3ossl), X509_ACERT_ISSUER_V2FORM_free(3ossl), X509_ACERT_ISSUER_V2FORM_new(3ossl), X509_ALGOR_free(3ossl), X509_ALGOR_it(3ossl), X509_ALGOR_new(3ossl), X509_ATTRIBUTE_dup(3ossl), X509_ATTRIBUTE_free(3ossl), X509_ATTRIBUTE_new(3ossl), X509_CERT_AUX_free(3ossl), X509_CERT_AUX_new(3ossl), X509_CINF_free(3ossl), X509_CINF_new(3ossl), X509_CRL_INFO_free(3ossl), X509_CRL_INFO_new(3ossl), X509_CRL_dup(3ossl), X509_CRL_free(3ossl), X509_CRL_new_ex(3ossl), X509_CRL_new(3ossl), X509_EXTENSION_dup(3ossl), X509_EXTENSION_free(3ossl), X509_EXTENSION_new(3ossl), X509_NAME_ENTRY_dup(3ossl), X509_NAME_ENTRY_free(3ossl), X509_NAME_ENTRY_new(3ossl), X509_NAME_dup(3ossl), X509_NAME_free(3ossl), X509_NAME_new(3ossl), X509_REQ_INFO_free(3ossl), X509_REQ_INFO_new(3ossl), X509_REQ_dup(3ossl), X509_REQ_free(3ossl), X509_REQ_new(3ossl), X509_REQ_new_ex(3ossl), X509_REVOKED_dup(3ossl), X509_REVOKED_free(3ossl), X509_REVOKED_new(3ossl), X509_SIG_free(3ossl), X509_SIG_new(3ossl), X509_VAL_free(3ossl), X509_VAL_new(3ossl), X509_dup(3ossl): ASN1 object utilities
DECLARE_PEM_rw(3), PEM_read_CMS(3), PEM_read_bio_CMS(3), PEM_write_CMS(3), PEM_write_bio_CMS(3), PEM_write_DHxparams(3), PEM_write_bio_DHxparams(3), PEM_read_ECPKParameters(3), PEM_read_bio_ECPKParameters(3), PEM_write_ECPKParameters(3), PEM_write_bio_ECPKParameters(3), PEM_read_ECPrivateKey(3), PEM_write_ECPrivateKey(3), PEM_write_bio_ECPrivateKey(3), PEM_read_EC_PUBKEY(3), PEM_read_bio_EC_PUBKEY(3), PEM_write_EC_PUBKEY(3), PEM_write_bio_EC_PUBKEY(3), PEM_read_NETSCAPE_CERT_SEQUENCE(3), PEM_read_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_write_NETSCAPE_CERT_SEQUENCE(3), PEM_write_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_read_PKCS8(3), PEM_read_bio_PKCS8(3), PEM_write_PKCS8(3), PEM_write_bio_PKCS8(3), PEM_write_PKCS8_PRIV_KEY_INFO(3), PEM_read_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_PKCS8_PRIV_KEY_INFO(3), PEM_write_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_SSL_SESSION(3), PEM_read_bio_SSL_SESSION(3), PEM_write_SSL_SESSION(3), PEM_write_bio_SSL_SESSION(3): PEM object encoding routines
DECLARE_PEM_rw(3ossl), PEM_read_CMS(3ossl), PEM_read_bio_CMS(3ossl), PEM_write_CMS(3ossl), PEM_write_bio_CMS(3ossl), PEM_write_DHxparams(3ossl), PEM_write_bio_DHxparams(3ossl), PEM_read_ECPKParameters(3ossl), PEM_read_bio_ECPKParameters(3ossl), PEM_write_ECPKParameters(3ossl), PEM_write_bio_ECPKParameters(3ossl), PEM_read_ECPrivateKey(3ossl), PEM_write_ECPrivateKey(3ossl), PEM_write_bio_ECPrivateKey(3ossl), PEM_read_EC_PUBKEY(3ossl), PEM_read_bio_EC_PUBKEY(3ossl), PEM_write_EC_PUBKEY(3ossl), PEM_write_bio_EC_PUBKEY(3ossl), PEM_read_NETSCAPE_CERT_SEQUENCE(3ossl), PEM_read_bio_NETSCAPE_CERT_SEQUENCE(3ossl), PEM_write_NETSCAPE_CERT_SEQUENCE(3ossl), PEM_write_bio_NETSCAPE_CERT_SEQUENCE(3ossl), PEM_read_PKCS8(3ossl), PEM_read_bio_PKCS8(3ossl), PEM_write_PKCS8(3ossl), PEM_write_bio_PKCS8(3ossl), PEM_write_PKCS8_PRIV_KEY_INFO(3ossl), PEM_read_bio_PKCS8_PRIV_KEY_INFO(3ossl), PEM_read_PKCS8_PRIV_KEY_INFO(3ossl), PEM_write_bio_PKCS8_PRIV_KEY_INFO(3ossl), PEM_read_SSL_SESSION(3ossl), PEM_read_bio_SSL_SESSION(3ossl), PEM_write_SSL_SESSION(3ossl), PEM_write_bio_SSL_SESSION(3ossl), PEM_read_X509_PUBKEY(3ossl), PEM_read_bio_X509_PUBKEY(3ossl), PEM_write_X509_PUBKEY(3ossl), PEM_write_bio_X509_PUBKEY(3ossl): PEM object encoding routines
ECPKParameters_print(3), ECPKParameters_print_fp(3): Functions for decoding and encoding ASN1 representations of elliptic curve entities
ECPKParameters_print(3ossl), ECPKParameters_print_fp(3ossl): Functions for decoding and encoding ASN1 representations of elliptic curve entities
EC_GROUP_get_ecparameters(3), EC_GROUP_get_ecpkparameters(3), EC_GROUP_new(3), EC_GROUP_new_from_ecparameters(3), EC_GROUP_new_from_ecpkparameters(3), EC_GROUP_free(3), EC_GROUP_clear_free(3), EC_GROUP_new_curve_GFp(3), EC_GROUP_new_curve_GF2m(3), EC_GROUP_new_by_curve_name(3), EC_GROUP_set_curve(3), EC_GROUP_get_curve(3), EC_GROUP_set_curve_GFp(3), EC_GROUP_get_curve_GFp(3), EC_GROUP_set_curve_GF2m(3), EC_GROUP_get_curve_GF2m(3), EC_get_builtin_curves(3): Functions for creating and destroying EC_GROUP objects
EC_GROUP_get_ecparameters(3ossl), EC_GROUP_get_ecpkparameters(3ossl), EC_GROUP_new_from_params(3ossl), EC_GROUP_to_params(3ossl), EC_GROUP_new_from_ecparameters(3ossl), EC_GROUP_new_from_ecpkparameters(3ossl), EC_GROUP_new(3ossl), EC_GROUP_free(3ossl), EC_GROUP_clear_free(3ossl), EC_GROUP_new_curve_GFp(3ossl), EC_GROUP_new_curve_GF2m(3ossl), EC_GROUP_new_by_curve_name_ex(3ossl), EC_GROUP_new_by_curve_name(3ossl), EC_GROUP_set_curve(3ossl), EC_GROUP_get_curve(3ossl), EC_GROUP_set_curve_GFp(3ossl), EC_GROUP_get_curve_GFp(3ossl), EC_GROUP_set_curve_GF2m(3ossl), EC_GROUP_get_curve_GF2m(3ossl), EC_get_builtin_curves(3ossl), OSSL_EC_curve_nid2name(3ossl): Functions for creating and destroying EC_GROUP objects
FcPatternAdd(3): Add a value to a pattern
FcPatternAdd-Type(3), FcPatternAddInteger(3), FcPatternAddDouble(3), FcPatternAddString(3), FcPatternAddMatrix(3), FcPatternAddCharSet(3), FcPatternAddBool(3), FcPatternAddFTFace(3), FcPatternAddLangSet(3), FcPatternAddRange(3): Add a typed value to a pattern
FcPatternAddWeak(3): Add a value to a pattern with weak binding
FcPatternBuild(3), FcPatternVaBuild(3), FcPatternVapBuild(3): Create patterns from arguments
FcPatternCreate(3): Create a pattern
FcPatternDel(3): Delete a property from a pattern
FcPatternDestroy(3): Destroy a pattern
FcPatternDuplicate(3): Copy a pattern
FcPatternEqual(3): Compare patterns
FcPatternEqualSubset(3): Compare portions of patterns
FcPatternFilter(3): Filter the objects of pattern
FcPatternFindIter(3): Set the iterator to point to the object in the pattern
FcPatternFormat(3): Format a pattern into a string according to a format specifier
FcPatternGet(3): Return a value from a pattern
FcPatternGet-Type(3), FcPatternGetInteger(3), FcPatternGetDouble(3), FcPatternGetString(3), FcPatternGetMatrix(3), FcPatternGetCharSet(3), FcPatternGetBool(3), FcPatternGetFTFace(3), FcPatternGetLangSet(3), FcPatternGetRange(3): Return a typed value from a pattern
FcPatternGetWithBinding(3): Return a value with binding from a pattern
FcPatternHash(3): Compute a pattern hash value
FcPatternIterEqual(3): Compare iterators
FcPatternIterGetObject(3): Returns an object name which the iterator point to
FcPatternIterGetValue(3): Returns a value which the iterator point to
FcPatternIterIsValid(3): Check whether the iterator is valid or not
FcPatternIterStart(3): Initialize the iterator with the first iterator in the pattern
FcPatternIterValueCount(3): Returns the number of the values which the iterator point to
FcPatternObjectCount(3): Returns the number of the object
FcPatternPrint(3): Print a pattern for debugging
FcPatternReference(3): Increment pattern reference count
FcPatternRemove(3): Remove one object of the specified type from the pattern
FvwmCpp(1): the Fvwm Cpp pre-processor
GETCPAT(3): GENPAT Package man1/alc_origin.1
GeodesicProj(1): -- perform projections based on geodesics
HPL_dlacpy(3): B := A
HPL_dlatcpy(3): B := A^T
HPL_ptimer_cputime(3): Return the CPU time
HPL_timer_cputime(3): Return the CPU time
OPENSSL_malloc_init(3), OPENSSL_malloc(3), OPENSSL_zalloc(3), OPENSSL_realloc(3), OPENSSL_free(3), OPENSSL_clear_realloc(3), OPENSSL_clear_free(3), OPENSSL_cleanse(3), CRYPTO_malloc(3), CRYPTO_zalloc(3), CRYPTO_realloc(3), CRYPTO_free(3), OPENSSL_strdup(3), OPENSSL_strndup(3), OPENSSL_memdup(3), OPENSSL_strlcpy(3), OPENSSL_strlcat(3), OPENSSL_hexstr2buf(3), OPENSSL_buf2hexstr(3), OPENSSL_hexchar2int(3), CRYPTO_strdup(3), CRYPTO_strndup(3), OPENSSL_mem_debug_push(3), OPENSSL_mem_debug_pop(3), CRYPTO_mem_debug_push(3), CRYPTO_mem_debug_pop(3), CRYPTO_clear_realloc(3), CRYPTO_clear_free(3), CRYPTO_get_mem_functions(3), CRYPTO_set_mem_functions(3), CRYPTO_get_alloc_counts(3), CRYPTO_set_mem_debug(3), CRYPTO_mem_ctrl(3), CRYPTO_mem_leaks(3), CRYPTO_mem_leaks_fp(3), CRYPTO_mem_leaks_cb(3), OPENSSL_MALLOC_FAILURES(3), OPENSSL_MALLOC_FD(3): Memory allocation functions
OPENSSL_malloc_init(3ossl), OPENSSL_malloc(3ossl), OPENSSL_aligned_alloc(3ossl), OPENSSL_zalloc(3ossl), OPENSSL_realloc(3ossl), OPENSSL_free(3ossl), OPENSSL_clear_realloc(3ossl), OPENSSL_clear_free(3ossl), OPENSSL_cleanse(3ossl), CRYPTO_malloc(3ossl), CRYPTO_aligned_alloc(3ossl), CRYPTO_zalloc(3ossl), CRYPTO_realloc(3ossl), CRYPTO_free(3ossl), OPENSSL_strdup(3ossl), OPENSSL_strndup(3ossl), OPENSSL_memdup(3ossl), OPENSSL_strlcpy(3ossl), OPENSSL_strlcat(3ossl), OPENSSL_strtoul(3ossl), CRYPTO_strdup(3ossl), CRYPTO_strndup(3ossl), OPENSSL_mem_debug_push(3ossl), OPENSSL_mem_debug_pop(3ossl), CRYPTO_mem_debug_push(3ossl), CRYPTO_mem_debug_pop(3ossl), CRYPTO_clear_realloc(3ossl), CRYPTO_clear_free(3ossl), CRYPTO_malloc_fn(3ossl), CRYPTO_realloc_fn(3ossl), CRYPTO_free_fn(3ossl), CRYPTO_get_mem_functions(3ossl), CRYPTO_set_mem_functions(3ossl), CRYPTO_get_alloc_counts(3ossl), CRYPTO_set_mem_debug(3ossl), CRYPTO_mem_ctrl(3ossl), CRYPTO_mem_leaks(3ossl), CRYPTO_mem_leaks_fp(3ossl), CRYPTO_mem_leaks_cb(3ossl), OPENSSL_MALLOC_FAILURES(3ossl), OPENSSL_MALLOC_FD(3ossl): Memory allocation functions
SPI_execp(3): execute a statement in read/write mode
Smokeping_probes_CiscoRTTMonTcpConnect(3), Smokeping::probes::CiscoRTTMonTcpConnect(3): Probe for SmokePing
Smokeping_probes_EchoPingIcp(3), Smokeping::probes::EchoPingIcp(3): an echoping(1) probe for SmokePing
Smokeping_probes_TCPPing(3), Smokeping::probes::TCPPing(3): TCPPing Probe for SmokePing
Strn(3), Strncpy()(3), Strncat()(3): Safe string copying functions
Tcl_ConsolePanic.tcl90(3), Tcl_Panic(3), Tcl_SetPanicProc(3), Tcl_ConsolePanic(3): report fatal error and abort
Tcl_MakeTcpClientChannel.tcl86(3), Tcl_OpenTcpClient(3), Tcl_MakeTcpClientChannel(3), Tcl_OpenTcpServer(3): procedures to open channels using TCP sockets
Tcl_MakeTcpClientChannel.tcl90(3), Tcl_OpenTcpClient(3), Tcl_MakeTcpClientChannel(3), Tcl_OpenTcpServer(3), Tcl_OpenTcpServerEx(3): procedures to open channels using TCP sockets
Tcl_Panic.tcl86(3), Tcl_Panic(3), Tcl_PanicVA(3), Tcl_SetPanicProc(3): report fatal error and abort
Tcl_StaticLibrary.tcl90(3), Tcl_StaticLibrary(3), Tcl_StaticPackage(3): make a statically linked library available via the 'load' command
Tcl_StaticPackage.tcl86(3), Tcl_StaticPackage(3): make a statically linked package available via the 'load' command
aecp(1), aegis copy file(1): copy a file into a change
aecpu(1), aegis copy file undo(1): reverse action of aecp
al_get_cpu_count(3): Allegro 5 API
ampctld(1): TCP amplifier control daemon
ams2psf(1): convert an Amstrad CP/M font to a PC Screen Font file
apcpwr(8): control power on/off/reboot via an APC MasterSwitch
appjail-cpuset(1): Configure processor sets for jails
archive_read_format(3), archive_read_support_format_7zip(3), archive_read_support_format_all(3), archive_read_support_format_ar(3), archive_read_support_format_by_code(3), archive_read_support_format_cab(3), archive_read_support_format_cpio(3), archive_read_support_format_empty(3), archive_read_support_format_iso9660(3), archive_read_support_format_lha(3), archive_read_support_format_mtree(3), archive_read_support_format_rar(3), archive_read_support_format_raw(3), archive_read_support_format_tar(3), archive_read_support_format_xar(3), archive_read_support_format_zip(3): functions for reading streaming archives
archive_write_format(3), archive_write_set_format(3), archive_write_set_format_7zip(3), archive_write_set_format_ar(3), archive_write_set_format_ar_bsd(3), archive_write_set_format_ar_svr4(3), archive_write_set_format_by_name(3), archive_write_set_format_cpio(3), archive_write_set_format_cpio_bin(3), archive_write_set_format_cpio_newc(3), archive_write_set_format_cpio_odc(3), archive_write_set_format_cpio_pwb(3), archive_write_set_format_filter_by_ext(3), archive_write_set_format_filter_by_ext_def(3), archive_write_set_format_gnutar(3), archive_write_set_format_iso9660(3), archive_write_set_format_mtree(3), archive_write_set_format_mtree_classic(3), archive_write_set_format_mtree_default(3), archive_write_set_format_pax(3), archive_write_set_format_pax_restricted(3), archive_write_set_format_raw(3), archive_write_set_format_shar(3), archive_write_set_format_shar_dump(3), archive_write_set_format_ustar(3), archive_write_set_format_v7tar(3), archive_write_set_format_warc(3), archive_write_set_format_xar(3), archive_write_set_format_zip(3): functions for creating archives
ascpu(1): the AfterStep CPU load monitor
asn1parse(1ossl), ca(1ossl), ciphers(1ossl), cmp(1ossl), cms(1ossl), crl(1ossl), crl2pkcs7(1ossl), dgst(1ossl), dhparam(1ossl), dsa(1ossl), dsaparam(1ossl), ec(1ossl), ecparam(1ossl), enc(1ossl), engine(1ossl), errstr(1ossl), gendsa(1ossl), genpkey(1ossl), genrsa(1ossl), info(1ossl), kdf(1ossl), mac(1ossl), nseq(1ossl), ocsp(1ossl), passwd(1ossl), pkcs12(1ossl), pkcs7(1ossl), pkcs8(1ossl), pkey(1ossl), pkeyparam(1ossl), pkeyutl(1ossl), prime(1ossl), rand(1ossl), rehash(1ossl), req(1ossl), rsa(1ossl), rsautl(1ossl), s_client(1ossl), s_server(1ossl), s_time(1ossl), sess_id(1ossl), smime(1ossl), speed(1ossl), spkac(1ossl), srp(1ossl), storeutl(1ossl), ts(1ossl), verify(1ossl), version(1ossl), x509(1ossl): OpenSSL application commands
au_control(3), setac(3), endac(3), getacdir(3), getacmin(3), getacexpire(3), getacfilesz(3), getacflg(3), getacna(3), getacpol(3), au_poltostr(3), au_strtopol(3): look up information from the audit_control database
balance(1), balance 3.54(1): A simple TCP proxy with load balancing and failover mechanisms
barman-cloud-backup(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-backup [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ { { -z | --gzip } | { -j | --bzip2 } | --snappy } ] [ { -h | --host } HOST ] [ { -p | --port } PORT ] [ { -U | --user } USER ] [ { -d | --dbname } DBNAME ] [ { -n | --name } BACKUP_NAME ] [ { -J | --jobs } JOBS ] [ { -S | --max-archive-size } MAX_ARCHIVE_SIZE ] [ --immediate-checkpoint ] [ --min-chunk-size MIN_CHUNK_SIZE ] [ --max-bandwidth MAX_BANDWIDTH ] [ --snapshot-instance SNAPSHOT_INSTANCE ] [ --snapshot-disk NAME ] [ --snapshot-zone GCP_ZONE ] [ -snapshot-gcp-project GCP_PROJECT ] [ --tags TAG [ TAG ... ] ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { -e | --encryption } { AES256 | aws:kms } ] [ --sse-kms-key-id SSE_KMS_KEY_ID ] [ --aws-region AWS_REGION ] [ --aws-await-snapshots-timeout AWS_AWAIT_SNAPSHOTS_TIMEOUT ] [ --aws-snapshot-lock-mode { compliance | governance } ] [ --aws-snapshot-lock-duration DAYS ] [ --aws-snapshot-lock-cool-off-period HOURS ] [ --aws-snapshot-lock-expiration-date DATETIME ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --encryption-scope ENCRYPTION_SCOPE ] [ --azure-subscription-id AZURE_SUBSCRIPTION_ID ] [ --azure-resource-group AZURE_RESOURCE_GROUP ] [ --gcp-project GCP_PROJECT ] [ --kms-key-name KMS_KEY_NAME ] [ --gcp-zone GCP_ZONE ] DESTINATION_URL SERVER_NAME Description The barman-cloud-backup script is used to create a local backup of a Postgres server and transfer it to a supported cloud provider, bypassing the Barman server. It can also be utilized as a hook script for copying Barman backups from the Barman server to one of the supported clouds (post_backup_retry_script). This script requires read access to PGDATA and tablespaces, typically run as the postgres user. When used on a Barman server, it requires read access to the directory where Barman backups are stored. If --snapshot- arguments are used and snapshots are supported by the selected cloud provider, the backup will be performed using snapshots of the specified disks (--snapshot-disk). The backup label and metadata will also be uploaded to the cloud. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. IMPORTANT: 0.0 3.5 The cloud upload may fail if any file larger than the configured --max-archive-size is present in the data directory or tablespaces. However, Postgres files up to 1GB are always allowed, regardless of the --max-archive-size setting. Parameters 0.0 SERVER_NAME Name of the server to be backed up. DESTINATION_URL URL of the cloud destination, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. -z / --gzip gzip-compress the backup while uploading to the cloud (should not be used with python < 3.2). -j / --bzip2 bzip2-compress the backup while uploading to the cloud (should not be used with python < 3.3). --snappy snappy-compress the backup while uploading to the cloud (requires optional python-snappy library). -h / --host Host or Unix socket for Postgres connection (default: libpq settings). -p / --port Port for Postgres connection (default: libpq settings). -U / --user User name for Postgres connection (default: libpq settings). -d / --dbname Database name or conninfo string for Postgres connection (default: (dqpostgres(dq). -n / --name A name which can be used to reference this backup in commands such as barman-cloud-restore and barman-cloud-backup-delete. -J / --jobs Number of subprocesses to upload data to cloud storage (default: 2). -S / --max-archive-size Maximum size of an archive when uploading to cloud storage (default: 100GB). --immediate-checkpoint Forces the initial checkpoint to be done as quickly as possible. --min-chunk-size Minimum size of an individual chunk when uploading to cloud storage (default: 5MB for aws-s3, 64KB for azure-blob-storage, not applicable for google-cloud-storage). --max-bandwidth The maximum amount of data to be uploaded per second when backing up to object storages (default: 0 - no limit). --snapshot-instance Instance where the disks to be backed up as snapshots are attached. --snapshot-disk Name of a disk from which snapshots should be taken. --tags Tags to be added to all uploaded files in cloud storage, and/or to snapshots created, if snapshots are used. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). -e / --encryption The encryption algorithm used when storing the uploaded data in S3. Allowed options: 7.0 (bu 2 AES256. (bu 2 aws:kms. --sse-kms-key-id The AWS KMS key ID that should be used for encrypting the uploaded data in S3. Can be specified using the key ID on its own or using the full ARN for the key. Only allowed if -e / --encryption is set to aws:kms. --aws-region The name of the AWS region containing the EC2 VM and storage volumes defined by the --snapshot-instance and --snapshot-disk arguments. --aws-await-snapshots-timeout The length of time in seconds to wait for snapshots to be created in AWS before timing out (default: 3600 seconds). --aws-snapshot-lock-mode The lock mode for the snapshot. This is only valid if --snapshot-instance and --snapshot-disk are set. Allowed options: 7.0 (bu 2 compliance. (bu 2 governance. --aws-snapshot-lock-duration The lock duration is the period of time (in days) for which the snapshot is to remain locked, ranging from 1 to 36,500. Set either the lock duration or the expiration date (not both). --aws-snapshot-lock-cool-off-period The cooling-off period is an optional period of time (in hours) that you can specify when you lock a snapshot in compliance mode, ranging from 1 to 72. --aws-snapshot-lock-expiration-date The lock duration is determined by an expiration date in the future. It must be at least 1 day after the snapshot creation date and time, using the format YYYY-MM-DDTHH:MM:SS.sssZ. Set either the lock duration or the expiration date (not both). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default. --encryption-scope The name of an encryption scope defined in the Azure Blob Storage service which is to be used to encrypt the data in Azure. --azure-subscription-id The ID of the Azure subscription which owns the instance and storage volumes defined by the --snapshot-instance and --snapshot-disk arguments. --azure-resource-group The name of the Azure resource group to which the compute instance and disks defined by the --snapshot-instance and --snapshot-disk arguments belong. Extra options for GCP cloud provider 0.0 --gcp-project GCP project under which disk snapshots should be stored. --snapshot-gcp-project (deprecated) GCP project under which disk snapshots should be stored - replaced by --gcp-project. --kms-key-name The name of the GCP KMS key which should be used for encrypting the uploaded data in GCS. --gcp-zone Zone of the disks from which snapshots should be taken. --snapshot-zone (deprecated) Zone of the disks from which snapshots should be taken - replaced by --gcp-zone
barman-cloud-backup-delete(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-backup-delete [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ --endpoint-url ENDPOINT_URL ] [ { -r | --retention-policy } RETENTION_POLICY ] [ { -m | --minimum-redundancy } MINIMUM_REDUNDANCY ] [ { -b | --backup-id } BACKUP_ID] [ --dry-run ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [--batch-size DELETE_BATCH_SIZE] SOURCE_URL SERVER_NAME Description The barman-cloud-backup-delete script is used to delete one or more backups created with the barman-cloud-backup command from cloud storage and to remove the associated WAL files. Backups can be specified for deletion either by their backup ID (as obtained from barman-cloud-backup-list) or by a retention policy. Retention policies mirror those used by the Barman server, deleting all backups that are not required to meet the specified policy. When a backup is deleted, any unused WAL files associated with that backup are also removed. WALs are considered unused if: 0.0 (bu 2 The WALs predate the begin_wal value of the oldest remaining backup. (bu 2 The WALs are not required by any archival backups stored in the cloud. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. IMPORTANT: 0.0 3.5 Each backup deletion involves three separate requests to the cloud provider: one for the backup files, one for the backup.info file, and one for the associated WALs. Deleting by retention policy may result in a high volume of delete requests if a large number of backups are accumulated in cloud storage. Parameters 0.0 SERVER_NAME Name of the server that holds the backup to be deleted. SOURCE_URL URL of the cloud source, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. -b / --backup-id ID of the backup to be deleted -m / --minimum-redundancy The minimum number of backups that should always be available. -r / --retention-policy If specified, delete all backups eligible for deletion according to the supplied retention policy. Syntax: REDUNDANCY value | RECOVERY WINDOW OF value { DAYS | WEEKS | MONTHS } --batch-size The maximum number of objects to be deleted in a single request to the cloud provider. If unset then the maximum allowed batch size for the specified cloud provider will be used (1000 for aws-s3, 256 for azure-blob-storage and 100 for google-cloud-storage). --dry-run Find the objects which need to be deleted but do not delete them. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default
barman-cloud-backup-keep(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-backup-keep [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ { { -r | --release } | { -s | --status } | --target { full | standalone } } ] SOURCE_URL SERVER_NAME BACKUP_ID Description Use this script to designate backups in cloud storage as archival backups, ensuring their indefinite retention regardless of retention policies. This script allows you to mark backups previously created with barman-cloud-backup as archival backups. Once flagged as archival, these backups are preserved indefinitely and are not subject to standard retention policies. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 SERVER_NAME Name of the server that holds the backup to be kept. SOURCE_URL URL of the cloud source, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. BACKUP_ID The ID of the backup to be kept. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. -r / --release If specified, the command will remove the keep annotation and the backup will be eligible for deletion. -s / --status Print the keep status of the backup. --target Specify the recovery target for this backup. Allowed options are: 7.0 (bu 2 full (bu 2 standalone Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default
barman-cloud-backup-list(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-backup-list [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --format FORMAT ] SOURCE_URL SERVER_NAME Description This script lists backups stored in the cloud that were created using the barman-cloud-backup command. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 SERVER_NAME Name of the server that holds the backup to be listed. SOURCE_URL URL of the cloud source, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. --format Output format (console or json). Default console. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default
barman-cloud-backup-show(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-backup-show [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --format FORMAT ] SOURCE_URL SERVER_NAME BACKUP_ID Description This script displays detailed information about a specific backup created with the barman-cloud-backup command. The output is similar to the barman show-backup from the %barman show-backup command reference, but it has fewer information. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 BACKUP_ID The ID of the backup. SERVER_NAME Name of the server that holds the backup to be displayed. SOURCE_URL URL of the cloud source, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. --format Output format (console or json). Default console. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default
barman-cloud-check-wal-archive(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-check-wal-archive [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --timeline TIMELINE ] DESTINATION_URL SERVER_NAME Description Verify that the WAL archive destination for a server is suitable for use with a new Postgres cluster. By default, the check will succeed if the WAL archive is empty or if the target bucket is not found. Any other conditions will result in a failure. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 SERVER_NAME Name of the server that needs to be checked. DESTINATION_URL URL of the cloud destination, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. --timeline The earliest timeline whose WALs should cause the check to fail. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default
barman-cloud-restore(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-restore [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --snapshot-recovery-instance SNAPSHOT_RECOVERY_INSTANCE ] [ --snapshot-recovery-zone GCP_ZONE ] [ --aws-region AWS_REGION ] [ --gcp-zone GCP_ZONE ] [ --azure-resource-group AZURE_RESOURCE_GROUP ] [ --tablespace NAME:LOCATION [ --tablespace NAME:LOCATION ... ] ] [ --target-lsn LSN ] [ --target-time TIMESTAMP ] [ --target-tli TLI ] SOURCE_URL SERVER_NAME BACKUP_ID RECOVERY_DESTINATION Description Use this script to restore a backup directly from cloud storage that was created with the barman-cloud-backup command. Additionally, this script can prepare for recovery from a snapshot backup by verifying that attached disks were cloned from the correct snapshots and by downloading the backup label from object storage. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 SERVER_NAME Name of the server that holds the backup to be restored. SOURCE_URL URL of the cloud source, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. BACKUP_ID The ID of the backup to be restored. Use auto to have Barman automatically find the most suitable backup for the restore operation. RECOVERY_DESTINATION The path to a directory for recovery. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. --snapshot-recovery-instance Instance where the disks recovered from the snapshots are attached. --tablespace Tablespace relocation rule. --target-lsn The recovery target lsn, e.g., 3/64000000. --target-time The recovery target timestamp with or without timezone, in the format %Y-%m-%d %H:%M:%S. --target-tli The recovery target timeline. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). --aws-region The name of the AWS region containing the EC2 VM and storage volumes defined by the --snapshot-instance and --snapshot-disk arguments. Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default. --azure-resource-group The name of the Azure resource group to which the compute instance and disks defined by the --snapshot-instance and --snapshot-disk arguments belong. Extra options for GCP cloud provider 0.0 --gcp-zone Zone of the disks from which snapshots should be taken. --snapshot-recovery-zone (deprecated) Zone containing the instance and disks for the snapshot recovery - replaced by --gcp-zone
barman-cloud-wal-archive(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-wal-archive [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ { { -z | --gzip } | { -j | --bzip2 } | --xz | --snappy | --zstd | --lz4 } ] [ --tags TAG [ TAG ... ] ] [ --history-tags HISTORY_TAG [ HISTORY_TAG ... ] ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { -e | --encryption } ENCRYPTION ] [ --sse-kms-key-id SSE_KMS_KEY_ID ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --encryption-scope ENCRYPTION_SCOPE ] [ --max-block-size MAX_BLOCK_SIZE ] [ --max-concurrency MAX_CONCURRENCY ] [ --max-single-put-size MAX_SINGLE_PUT_SIZE ] [ --kms-key-name KMS_KEY_NAME ] DESTINATION_URL SERVER_NAME [ WAL_PATH ] Description The barman-cloud-wal-archive command is designed to be used in the archive_command of a Postgres server to directly ship WAL files to cloud storage. NOTE: 0.0 3.5 If you are using Python 2 or unsupported versions of Python 3, avoid using the compression options --gzip or --bzip2. The script cannot restore gzip-compressed WALs on Python < 3.2 or bzip2-compressed WALs on Python < 3.3. This script enables the direct transfer of WAL files to cloud storage, bypassing the Barman server. Additionally, it can be utilized as a hook script for WAL archiving (pre_archive_retry_script). NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 SERVER_NAME Name of the server that will have the WALs archived. DESTINATION_URL URL of the cloud destination, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. WAL_PATH The value of the (aq%p(aq keyword (according to archive_command). -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. -z / --gzip gzip-compress the WAL while uploading to the cloud. -j / --bzip2 bzip2-compress the WAL while uploading to the cloud. --xz xz-compress the WAL while uploading to the cloud. --snappy snappy-compress the WAL while uploading to the cloud (requires optional python-snappy library). --zstd zstd-compress the WAL while uploading to the cloud (requires optional zstandard library). --lz4 lz4-compress the WAL while uploading to the cloud (requires optional lz4 library). --tags Tags to be added to archived WAL files in cloud storage. --history-tags Tags to be added to archived history files in cloud storage. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). -e / --encryption The encryption algorithm used when storing the uploaded data in S3. Allowed options: 7.0 (bu 2 AES256. (bu 2 aws:kms. --sse-kms-key-id The AWS KMS key ID that should be used for encrypting the uploaded data in S3. Can be specified using the key ID on its own or using the full ARN for the key. Only allowed if -e / --encryption is set to aws:kms. Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default. --encryption-scope The name of an encryption scope defined in the Azure Blob Storage service which is to be used to encrypt the data in Azure. --max-block-size The chunk size to be used when uploading an object via the concurrent chunk method (default: 4MB). --max-concurrency The maximum number of chunks to be uploaded concurrently (default: 1). --max-single-put-size Maximum size for which the Azure client will upload an object in a single request (default: 64MB). If this is set lower than the Postgres WAL segment size after any applied compression then the concurrent chunk upload method for WAL archiving will be used. Extra options for GCP cloud provider 0.0 --kms-key-name The name of the GCP KMS key which should be used for encrypting the uploaded data in GCS
barman-cloud-wal-restore(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-wal-restore [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --no-partial ] SOURCE_URL SERVER_NAME WAL_NAME WAL_DEST Description The barman-cloud-wal-restore script functions as the restore_command for retrieving WAL files from cloud storage and placing them directly into a Postgres standby server, bypassing the Barman server. This script is used to download WAL files that were previously archived with the barman-cloud-wal-archive command. Disable automatic download of .partial files by calling --no-partial option. IMPORTANT: 0.0 3.5 On the target Postgres node, when pg_wal and the spool directory are on the same filesystem, files are moved via renaming, which is faster than copying and deleting. This speeds up serving WAL files significantly. If the directories are on different filesystems, the process still involves copying and deleting, so there(aqs no performance gain in that case. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 SERVER_NAME Name of the server that will have WALs restored. SOURCE_URL URL of the cloud source, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. WAL_NAME The value of the (aq%f(aq keyword (according to restore_command). WAL_DEST The value of the (aq%p(aq keyword (according to restore_command). -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. --no-partial Do not download partial WAL files Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default
battmond(1): monitor battery level on ACPI-enabled (laptop) computers
bcmxcp(8): Driver for UPSes supporting the serial BCM/XCP protocol
bcmxcp_usb(8): Experimental driver for UPSes supporting the BCM/XCP protocol over USB
binkd(8): transfer files between two Fidonet systems over TCP/IP
bsdcpio(1), cpio(1): copy files to and from archives
bw_tcp(8): time data movement through TCP/IP sockets
camlp5(1): Pre-Precessor-Pretty-Printer for ocaml mkcamlp5 - Create custom camlp5 mkcamlp5.opt - Create custom camlp5 (native code) ocpp5 - Universal preprocessor
cdm(1): CP/M disk manager
check_cpu(3): Detects the CPU type. Allegro game programming library
chem(1), %chem(1): embed chemical structure diagrams in groff documents nr *groff_chem_1_man_C n[.cp] do-fallback 0 !n(.f .nr do-fallback 1 " mandoc n(.g .if !d MR .nr do-fallback 1 " older groff !n(.g .nr do-fallback 1 " non-groff *roff n[do-fallback] {
clog(8): tcp connection logger daemon
cntlm(1): authenticating HTTP(S) proxy with TCP/IP tunneling and acceleration
coap_encryption(3), coap_dtls_cpsk_t(3), coap_dtls_spsk_t(3), coap_dtls_pki_t(3): Work with CoAP TLS/DTLS
coap_supported(3), coap_af_unix_is_supported(3), coap_async_is_supported(3), coap_client_is_supported(3), coap_dtls_is_supported(3), coap_dtls_cid_is_supported(3), coap_dtls_psk_is_supported(3), coap_dtls_pki_is_supported(3), coap_dtls_pkcs11_is_supported(3), coap_dtls_rpk_is_supported(3), coap_epoll_is_supported(3), coap_ipv4_is_supported(3), coap_ipv6_is_supported(3), coap_observe_persist_is_supported(3), coap_oscore_is_supported(3), coap_proxy_is_supported(3), coap_server_is_supported(3), coap_tcp_is_supported(3), coap_threadsafe_is_supported(3), coap_tls_is_supported(3), coap_ws_is_supported(3), coap_wss_is_supported(3): Work with CoAP runtime functionality
commoncpp-config(1): script to get information about common c++ library
coredns-clouddns(7), clouddns(7): enables serving zone data from GCP Cloud DNS
coredns-timeouts(7), timeouts(7): allows you to configure the server read, write and idle timeouts for the TCP, TLS and DoH servers
corosync-cpgtool(8): A tool for displaying cpg groups and members
couriertcpd(1): the Courier mail server TCP server daemon
cp-build(1): copy a file to a destination with version numbering and auditing
cpack(1): CPack Command-Line Reference
cpack-generators(7): CPack Generator Reference
cpaldjvu(1): DjVuDocument encoder for low-color images
cparser(1): C compiler
cpasswd(1): change passphrase on cfs directory
cpclean(1): Remove wrong control points by statistical methods
cpdic(1): User Dictionary Copy Tool
cpdup(1): mirror filesystems
cpfind(1): Feature matching for panoramic stitching
cpfs.reiserfs(8): a reiserfs filesystem copying program
cpg_context_get(3): Gets the context variable for a CPG instance
cpg_context_set(3): Sets the context variable for a CPG instance
cpg_dispatch(3): Dispatches callbacks from the CPG service
cpg_fd_get(3): Dispatches callbacks from the CPG service
cpg_finalize(3): Terminate a connection to the CPG service
cpg_initialize(3): Create a new connection to the CPG service
cpg_iteration_finalize(3): Finalize iterator for members of CPG
cpg_iteration_initialize(3): Initialize iterator for members of CPG
cpg_iteration_next(3): Return next item in iteration of CPG
cpg_join(3): Joins one or more groups in the CPG library
cpg_leave(3): Leave a group in the CPG library
cpg_local_get(3): Returns the local node id
cpg_mcast_joined(3): Multicasts a zero copy buffer to all groups joined to a handle
cpg_mcast_joined(3): Multicasts to all groups joined to a handle
cpg_membership_get(3): Returns a list of members of a CPG group
cpg_model_initialize(3): Create a new connection to the CPG service
cpg_overview(3): CPG library overview
cpg_overview(8): CPG library overview
cpg_zcb_alloc(3): Allocates a zero copy buffer
cpg_zcb_free(3): Frees a zero copy buffer
cpi2psf(1): extract a font from a DOS codepage (.CPI)
cpiax(4): cpiax webcamd driver for USB cameras
cpicomp(1): compress a CPI codepage by converting it to DRFONT format
cpidcomp(1): compress a CPI codepage by converting it to DRFONT format
cpio(5): format of cpio archive files
cpipe(1): copy stdin to stdout while counting bytes and reporting progress
cpl_complete_word(3), cfc_file_start(3), cfc_literal_escapes(3), cfc_set_check_fn(3), cpl_add_completion(3), cpl_file_completions(3), cpl_last_error(3), cpl_list_completions(3), cpl_recall_matches(3), cpl_record_error(3), del_CplFileConf(3), del_WordCompletion(3), new_CplFileConf(3), new_WordCompletion(3): lookup possible completions for a word
cpp(1): C preprocessor
cpp(1): The C Preprocessor
cpp(1): the C language preprocessor
cppcheck(1): Tool for static C/C++ code analysis
cppi(1): indent the C preprocessor directives in FILE to reflect their nesting
cproto(1): generate C function prototypes and convert function definitions
cptcat(1): concatenate GMT colour palette tables
cptclip(1): extract a sub-table from a GMT colour palette table (cpt)
cptcont(1): create a continuous GMT colour palette table (cpt) file based on the colours of a non-continuous cpt file
cpthsv(1): modify hue, saturation and colour value of GMT colour palette tables
cptinfo(1): print summary information on GMT colour palette table (cpt) files
cptpg(1): convert GMT colour palette tables (cpt) to PostGIS colour-maps
cptsvg(1): convert GMT colour palette tables (cpt) to SVG gradients
cptupdate(1): create a GMT colour palette table (cpt) file with a different version to the input
cpu_capabilities(3): Contains the capability flags of the CPU. Allegro game programming library
cpu_family(3): Contains the CPU type. Allegro game programming library
cpu_model(3): Contains the Intel CPU submodel. Allegro game programming library
cpu_vendor(3): Contains the CPU vendor name. Allegro game programming library
cpufetch(1): Simple yet fancy CPU architecture fetching tool
cpuid-etallen(1), cpuid(1): Dump CPUID information for each CPU
cpulimit(1): -- limits the CPU usage of a process
cpupdate(8): TO BE DONE: MANPAGE
critcl_cproc(n), critcl_cproc_types(n): CriTcl cproc Type Reference
curs_print(3x), %mcprint(3x): write binary data to printer using terminfo capabilities
cwcp(1): curses-based Morse tutor program
d2i_ACCESS_DESCRIPTION(3), d2i_ADMISSIONS(3), d2i_ADMISSION_SYNTAX(3), d2i_ASIdOrRange(3), d2i_ASIdentifierChoice(3), d2i_ASIdentifiers(3), d2i_ASN1_BIT_STRING(3), d2i_ASN1_BMPSTRING(3), d2i_ASN1_ENUMERATED(3), d2i_ASN1_GENERALIZEDTIME(3), d2i_ASN1_GENERALSTRING(3), d2i_ASN1_IA5STRING(3), d2i_ASN1_INTEGER(3), d2i_ASN1_NULL(3), d2i_ASN1_OBJECT(3), d2i_ASN1_OCTET_STRING(3), d2i_ASN1_PRINTABLE(3), d2i_ASN1_PRINTABLESTRING(3), d2i_ASN1_SEQUENCE_ANY(3), d2i_ASN1_SET_ANY(3), d2i_ASN1_T61STRING(3), d2i_ASN1_TIME(3), d2i_ASN1_TYPE(3), d2i_ASN1_UINTEGER(3), d2i_ASN1_UNIVERSALSTRING(3), d2i_ASN1_UTCTIME(3), d2i_ASN1_UTF8STRING(3), d2i_ASN1_VISIBLESTRING(3), d2i_ASRange(3), d2i_AUTHORITY_INFO_ACCESS(3), d2i_AUTHORITY_KEYID(3), d2i_BASIC_CONSTRAINTS(3), d2i_CERTIFICATEPOLICIES(3), d2i_CMS_ContentInfo(3), d2i_CMS_ReceiptRequest(3), d2i_CMS_bio(3), d2i_CRL_DIST_POINTS(3), d2i_DHxparams(3), d2i_DIRECTORYSTRING(3), d2i_DISPLAYTEXT(3), d2i_DIST_POINT(3), d2i_DIST_POINT_NAME(3), d2i_DSAPrivateKey(3), d2i_DSAPrivateKey_bio(3), d2i_DSAPrivateKey_fp(3), d2i_DSAPublicKey(3), d2i_DSA_PUBKEY(3), d2i_DSA_PUBKEY_bio(3), d2i_DSA_PUBKEY_fp(3), d2i_DSA_SIG(3), d2i_DSAparams(3), d2i_ECDSA_SIG(3), d2i_ECPKParameters(3), d2i_ECParameters(3), d2i_ECPrivateKey(3), d2i_ECPrivateKey_bio(3), d2i_ECPrivateKey_fp(3), d2i_EC_PUBKEY(3), d2i_EC_PUBKEY_bio(3), d2i_EC_PUBKEY_fp(3), d2i_EDIPARTYNAME(3), d2i_ESS_CERT_ID(3), d2i_ESS_ISSUER_SERIAL(3), d2i_ESS_SIGNING_CERT(3), d2i_EXTENDED_KEY_USAGE(3), d2i_GENERAL_NAME(3), d2i_GENERAL_NAMES(3), d2i_IPAddressChoice(3), d2i_IPAddressFamily(3), d2i_IPAddressOrRange(3), d2i_IPAddressRange(3), d2i_ISSUING_DIST_POINT(3), d2i_NAMING_AUTHORITY(3), d2i_NETSCAPE_CERT_SEQUENCE(3), d2i_NETSCAPE_SPKAC(3), d2i_NETSCAPE_SPKI(3), d2i_NOTICEREF(3), d2i_OCSP_BASICRESP(3), d2i_OCSP_CERTID(3), d2i_OCSP_CERTSTATUS(3), d2i_OCSP_CRLID(3), d2i_OCSP_ONEREQ(3), d2i_OCSP_REQINFO(3), d2i_OCSP_REQUEST(3), d2i_OCSP_RESPBYTES(3), d2i_OCSP_RESPDATA(3), d2i_OCSP_RESPID(3), d2i_OCSP_RESPONSE(3), d2i_OCSP_REVOKEDINFO(3), d2i_OCSP_SERVICELOC(3), d2i_OCSP_SIGNATURE(3), d2i_OCSP_SINGLERESP(3), d2i_OTHERNAME(3), d2i_PBE2PARAM(3), d2i_PBEPARAM(3), d2i_PBKDF2PARAM(3), d2i_PKCS12(3), d2i_PKCS12_BAGS(3), d2i_PKCS12_MAC_DATA(3), d2i_PKCS12_SAFEBAG(3), d2i_PKCS12_bio(3), d2i_PKCS12_fp(3), d2i_PKCS7(3), d2i_PKCS7_DIGEST(3), d2i_PKCS7_ENCRYPT(3), d2i_PKCS7_ENC_CONTENT(3), d2i_PKCS7_ENVELOPE(3), d2i_PKCS7_ISSUER_AND_SERIAL(3), d2i_PKCS7_RECIP_INFO(3), d2i_PKCS7_SIGNED(3), d2i_PKCS7_SIGNER_INFO(3), d2i_PKCS7_SIGN_ENVELOPE(3), d2i_PKCS7_bio(3), d2i_PKCS7_fp(3), d2i_PKCS8_PRIV_KEY_INFO(3), d2i_PKCS8_PRIV_KEY_INFO_bio(3), d2i_PKCS8_PRIV_KEY_INFO_fp(3), d2i_PKCS8_bio(3), d2i_PKCS8_fp(3), d2i_PKEY_USAGE_PERIOD(3), d2i_POLICYINFO(3), d2i_POLICYQUALINFO(3), d2i_PROFESSION_INFO(3), d2i_PROXY_CERT_INFO_EXTENSION(3), d2i_PROXY_POLICY(3), d2i_RSAPrivateKey(3), d2i_RSAPrivateKey_bio(3), d2i_RSAPrivateKey_fp(3), d2i_RSAPublicKey(3), d2i_RSAPublicKey_bio(3), d2i_RSAPublicKey_fp(3), d2i_RSA_OAEP_PARAMS(3), d2i_RSA_PSS_PARAMS(3), d2i_RSA_PUBKEY(3), d2i_RSA_PUBKEY_bio(3), d2i_RSA_PUBKEY_fp(3), d2i_SCRYPT_PARAMS(3), d2i_SCT_LIST(3), d2i_SXNET(3), d2i_SXNETID(3), d2i_TS_ACCURACY(3), d2i_TS_MSG_IMPRINT(3), d2i_TS_MSG_IMPRINT_bio(3), d2i_TS_MSG_IMPRINT_fp(3), d2i_TS_REQ(3), d2i_TS_REQ_bio(3), d2i_TS_REQ_fp(3), d2i_TS_RESP(3), d2i_TS_RESP_bio(3), d2i_TS_RESP_fp(3), d2i_TS_STATUS_INFO(3), d2i_TS_TST_INFO(3), d2i_TS_TST_INFO_bio(3), d2i_TS_TST_INFO_fp(3), d2i_USERNOTICE(3), d2i_X509(3), d2i_X509_bio(3), d2i_X509_fp(3), d2i_X509_ALGOR(3), d2i_X509_ALGORS(3), d2i_X509_ATTRIBUTE(3), d2i_X509_CERT_AUX(3), d2i_X509_CINF(3), d2i_X509_CRL(3), d2i_X509_CRL_INFO(3), d2i_X509_CRL_bio(3), d2i_X509_CRL_fp(3), d2i_X509_EXTENSION(3), d2i_X509_EXTENSIONS(3), d2i_X509_NAME(3), d2i_X509_NAME_ENTRY(3), d2i_X509_PUBKEY(3), d2i_X509_REQ(3), d2i_X509_REQ_INFO(3), d2i_X509_REQ_bio(3), d2i_X509_REQ_fp(3), d2i_X509_REVOKED(3), d2i_X509_SIG(3), d2i_X509_VAL(3), i2d_ACCESS_DESCRIPTION(3), i2d_ADMISSIONS(3), i2d_ADMISSION_SYNTAX(3), i2d_ASIdOrRange(3), i2d_ASIdentifierChoice(3), i2d_ASIdentifiers(3), i2d_ASN1_BIT_STRING(3), i2d_ASN1_BMPSTRING(3), i2d_ASN1_ENUMERATED(3), i2d_ASN1_GENERALIZEDTIME(3), i2d_ASN1_GENERALSTRING(3), i2d_ASN1_IA5STRING(3), i2d_ASN1_INTEGER(3), i2d_ASN1_NULL(3), i2d_ASN1_OBJECT(3), i2d_ASN1_OCTET_STRING(3), i2d_ASN1_PRINTABLE(3), i2d_ASN1_PRINTABLESTRING(3), i2d_ASN1_SEQUENCE_ANY(3), i2d_ASN1_SET_ANY(3), i2d_ASN1_T61STRING(3), i2d_ASN1_TIME(3), i2d_ASN1_TYPE(3), i2d_ASN1_UNIVERSALSTRING(3), i2d_ASN1_UTCTIME(3), i2d_ASN1_UTF8STRING(3), i2d_ASN1_VISIBLESTRING(3), i2d_ASN1_bio_stream(3), i2d_ASRange(3), i2d_AUTHORITY_INFO_ACCESS(3), i2d_AUTHORITY_KEYID(3), i2d_BASIC_CONSTRAINTS(3), i2d_CERTIFICATEPOLICIES(3), i2d_CMS_ ContentInfo(3), i2d_CMS_ReceiptRequest(3), i2d_CMS_bio(3), i2d_CRL_DIST_POINTS(3), i2d_DHxparams(3), i2d_DIRECTORYSTRING(3), i2d_DISPLAYTEXT(3), i2d_DIST_POINT(3), i2d_DIST_POINT_NAME(3), i2d_DSAPrivateKey(3), i2d_DSAPrivateKey_bio(3), i2d_DSAPrivateKey_fp(3), i2d_DSAPublicKey(3), i2d_DSA_PUBKEY(3), i2d_DSA_PUBKEY_bio(3), i2d_DSA_PUBKEY_fp(3), i2d_DSA_SIG(3), i2d_DSAparams(3), i2d_ECDSA_SIG(3), i2d_ECPKParameters(3), i2d_ECParameters(3), i2d_ECPrivateKey(3), i2d_ECPrivateKey_bio(3), i2d_ECPrivateKey_fp(3), i2d_EC_PUBKEY(3), i2d_EC_PUBKEY_bio(3), i2d_EC_PUBKEY_fp(3), i2d_EDIPARTYNAME(3), i2d_ESS_CERT_ID(3), i2d_ESS_ISSUER_SERIAL(3), i2d_ESS_SIGNING_CERT(3), i2d_EXTENDED_KEY_USAGE(3), i2d_GENERAL_NAME(3), i2d_GENERAL_NAMES(3), i2d_IPAddressChoice(3), i2d_IPAddressFamily(3), i2d_IPAddressOrRange(3), i2d_IPAddressRange(3), i2d_ISSUING_DIST_POINT(3), i2d_NAMING_AUTHORITY(3), i2d_NETSCAPE_CERT_SEQUENCE(3), i2d_NETSCAPE_SPKAC(3), i2d_NETSCAPE_SPKI(3), i2d_NOTICEREF(3), i2d_OCSP_BASICRESP(3), i2d_OCSP_CERTID(3), i2d_OCSP_CERTSTATUS(3), i2d_OCSP_CRLID(3), i2d_OCSP_ONEREQ(3), i2d_OCSP_REQINFO(3), i2d_OCSP_REQUEST(3), i2d_OCSP_RESPBYTES(3), i2d_OCSP_RESPDATA(3), i2d_OCSP_RESPID(3), i2d_OCSP_RESPONSE(3), i2d_OCSP_REVOKEDINFO(3), i2d_OCSP_SERVICELOC(3), i2d_OCSP_SIGNATURE(3), i2d_OCSP_SINGLERESP(3), i2d_OTHERNAME(3), i2d_PBE2PARAM(3), i2d_PBEPARAM(3), i2d_PBKDF2PARAM(3), i2d_PKCS12(3), i2d_PKCS12_BAGS(3), i2d_PKCS12_MAC_DATA(3), i2d_PKCS12_SAFEBAG(3), i2d_PKCS12_bio(3), i2d_PKCS12_fp(3), i2d_PKCS7(3), i2d_PKCS7_DIGEST(3), i2d_PKCS7_ENCRYPT(3), i2d_PKCS7_ENC_CONTENT(3), i2d_PKCS7_ENVELOPE(3), i2d_PKCS7_ISSUER_AND_SERIAL(3), i2d_PKCS7_NDEF(3), i2d_PKCS7_RECIP_INFO(3), i2d_PKCS7_SIGNED(3), i2d_PKCS7_SIGNER_INFO(3), i2d_PKCS7_SIGN_ENVELOPE(3), i2d_PKCS7_bio(3), i2d_PKCS7_fp(3), i2d_PKCS8PrivateKeyInfo_bio(3), i2d_PKCS8PrivateKeyInfo_fp(3), i2d_PKCS8_PRIV_KEY_INFO(3), i2d_PKCS8_PRIV_KEY_INFO_bio(3), i2d_PKCS8_PRIV_KEY_INFO_fp(3), i2d_PKCS8_bio(3), i2d_PKCS8_fp(3), i2d_PKEY_USAGE_PERIOD(3), i2d_POLICYINFO(3), i2d_POLICYQUALINFO(3), i2d_PROFESSION_INFO(3), i2d_PROXY_CERT_INFO_EXTENSION(3), i2d_PROXY_POLICY(3), i2d_RSAPrivateKey(3), i2d_RSAPrivateKey_bio(3), i2d_RSAPrivateKey_fp(3), i2d_RSAPublicKey(3), i2d_RSAPublicKey_bio(3), i2d_RSAPublicKey_fp(3), i2d_RSA_OAEP_PARAMS(3), i2d_RSA_PSS_PARAMS(3), i2d_RSA_PUBKEY(3), i2d_RSA_PUBKEY_bio(3), i2d_RSA_PUBKEY_fp(3), i2d_SCRYPT_PARAMS(3), i2d_SCT_LIST(3), i2d_SXNET(3), i2d_SXNETID(3), i2d_TS_ACCURACY(3), i2d_TS_MSG_IMPRINT(3), i2d_TS_MSG_IMPRINT_bio(3), i2d_TS_MSG_IMPRINT_fp(3), i2d_TS_REQ(3), i2d_TS_REQ_bio(3), i2d_TS_REQ_fp(3), i2d_TS_RESP(3), i2d_TS_RESP_bio(3), i2d_TS_RESP_fp(3), i2d_TS_STATUS_INFO(3), i2d_TS_TST_INFO(3), i2d_TS_TST_INFO_bio(3), i2d_TS_TST_INFO_fp(3), i2d_USERNOTICE(3), i2d_X509(3), i2d_X509_bio(3), i2d_X509_fp(3), i2d_X509_ALGOR(3), i2d_X509_ALGORS(3), i2d_X509_ATTRIBUTE(3), i2d_X509_CERT_AUX(3), i2d_X509_CINF(3), i2d_X509_CRL(3), i2d_X509_CRL_INFO(3), i2d_X509_CRL_bio(3), i2d_X509_CRL_fp(3), i2d_X509_EXTENSION(3), i2d_X509_EXTENSIONS(3), i2d_X509_NAME(3), i2d_X509_NAME_ENTRY(3), i2d_X509_PUBKEY(3), i2d_X509_REQ(3), i2d_X509_REQ_INFO(3), i2d_X509_REQ_bio(3), i2d_X509_REQ_fp(3), i2d_X509_REVOKED(3), i2d_X509_SIG(3), i2d_X509_VAL(3): convert objects from/to ASN.1/DER representation
d2i_ACCESS_DESCRIPTION(3ossl), d2i_ADMISSIONS(3ossl), d2i_ADMISSION_SYNTAX(3ossl), d2i_ASIdOrRange(3ossl), d2i_ASIdentifierChoice(3ossl), d2i_ASIdentifiers(3ossl), d2i_ASN1_BIT_STRING(3ossl), d2i_ASN1_BMPSTRING(3ossl), d2i_ASN1_ENUMERATED(3ossl), d2i_ASN1_GENERALIZEDTIME(3ossl), d2i_ASN1_GENERALSTRING(3ossl), d2i_ASN1_IA5STRING(3ossl), d2i_ASN1_INTEGER(3ossl), d2i_ASN1_NULL(3ossl), d2i_ASN1_OBJECT(3ossl), d2i_ASN1_OCTET_STRING(3ossl), d2i_ASN1_PRINTABLE(3ossl), d2i_ASN1_PRINTABLESTRING(3ossl), d2i_ASN1_SEQUENCE_ANY(3ossl), d2i_ASN1_SET_ANY(3ossl), d2i_ASN1_T61STRING(3ossl), d2i_ASN1_TIME(3ossl), d2i_ASN1_TYPE(3ossl), d2i_ASN1_UINTEGER(3ossl), d2i_ASN1_UNIVERSALSTRING(3ossl), d2i_ASN1_UTCTIME(3ossl), d2i_ASN1_UTF8STRING(3ossl), d2i_ASN1_VISIBLESTRING(3ossl), d2i_ASRange(3ossl), d2i_AUTHORITY_INFO_ACCESS(3ossl), d2i_AUTHORITY_KEYID(3ossl), d2i_BASIC_CONSTRAINTS(3ossl), d2i_CERTIFICATEPOLICIES(3ossl), d2i_CMS_ContentInfo(3ossl), d2i_CMS_ReceiptRequest(3ossl), d2i_CMS_bio(3ossl), d2i_CRL_DIST_POINTS(3ossl), d2i_DHxparams(3ossl), d2i_DIRECTORYSTRING(3ossl), d2i_DISPLAYTEXT(3ossl), d2i_DIST_POINT(3ossl), d2i_DIST_POINT_NAME(3ossl), d2i_DSA_SIG(3ossl), d2i_ECDSA_SIG(3ossl), d2i_ECPKParameters(3ossl), d2i_EDIPARTYNAME(3ossl), d2i_ESS_CERT_ID(3ossl), d2i_ESS_CERT_ID_V2(3ossl), d2i_ESS_ISSUER_SERIAL(3ossl), d2i_ESS_SIGNING_CERT(3ossl), d2i_ESS_SIGNING_CERT_V2(3ossl), d2i_EXTENDED_KEY_USAGE(3ossl), d2i_GENERAL_NAME(3ossl), d2i_GENERAL_NAMES(3ossl), d2i_IPAddressChoice(3ossl), d2i_IPAddressFamily(3ossl), d2i_IPAddressOrRange(3ossl), d2i_IPAddressRange(3ossl), d2i_ISSUER_SIGN_TOOL(3ossl), d2i_ISSUING_DIST_POINT(3ossl), d2i_NAMING_AUTHORITY(3ossl), d2i_NETSCAPE_CERT_SEQUENCE(3ossl), d2i_NETSCAPE_SPKAC(3ossl), d2i_NETSCAPE_SPKI(3ossl), d2i_NOTICEREF(3ossl), d2i_OCSP_BASICRESP(3ossl), d2i_OCSP_CERTID(3ossl), d2i_OCSP_CERTSTATUS(3ossl), d2i_OCSP_CRLID(3ossl), d2i_OCSP_ONEREQ(3ossl), d2i_OCSP_REQINFO(3ossl), d2i_OCSP_REQUEST(3ossl), d2i_OCSP_RESPBYTES(3ossl), d2i_OCSP_RESPDATA(3ossl), d2i_OCSP_RESPID(3ossl), d2i_OCSP_RESPONSE(3ossl), d2i_OCSP_REVOKEDINFO(3ossl), d2i_OCSP_SERVICELOC(3ossl), d2i_OCSP_SIGNATURE(3ossl), d2i_OCSP_SINGLERESP(3ossl), d2i_OSSL_AA_DIST_POINT(3ossl), d2i_OSSL_ALLOWED_ATTRIBUTES_CHOICE(3ossl), d2i_OSSL_ALLOWED_ATTRIBUTES_ITEM(3ossl), d2i_OSSL_ALLOWED_ATTRIBUTES_SYNTAX(3ossl), d2i_OSSL_ATAV(3ossl), d2i_OSSL_ATTRIBUTE_DESCRIPTOR(3ossl), d2i_OSSL_ATTRIBUTE_MAPPING(3ossl), d2i_OSSL_ATTRIBUTE_MAPPINGS(3ossl), d2i_OSSL_ATTRIBUTE_TYPE_MAPPING(3ossl), d2i_OSSL_ATTRIBUTE_VALUE_MAPPING(3ossl), d2i_OSSL_ATTRIBUTES_SYNTAX(3ossl), d2i_OSSL_AUTHORITY_ATTRIBUTE_ID_SYNTAX(3ossl), d2i_OSSL_BASIC_ATTR_CONSTRAINTS(3ossl), d2i_OSSL_CMP_ATAVS(3ossl), d2i_OSSL_CMP_MSG(3ossl), d2i_OSSL_CMP_PKIHEADER(3ossl), d2i_OSSL_CMP_PKISI(3ossl), d2i_OSSL_CRMF_CERTID(3ossl), d2i_OSSL_CRMF_CERTTEMPLATE(3ossl), d2i_OSSL_CRMF_ENCRYPTEDKEY(3ossl), d2i_OSSL_CRMF_ENCRYPTEDVALUE(3ossl), d2i_OSSL_CRMF_MSG(3ossl), d2i_OSSL_CRMF_MSGS(3ossl), d2i_OSSL_CRMF_PBMPARAMETER(3ossl), d2i_OSSL_CRMF_PKIPUBLICATIONINFO(3ossl), d2i_OSSL_CRMF_SINGLEPUBINFO(3ossl), d2i_OSSL_DAY_TIME(3ossl), d2i_OSSL_DAY_TIME_BAND(3ossl), d2i_OSSL_HASH(3ossl), d2i_OSSL_IETF_ATTR_SYNTAX(3ossl), d2i_OSSL_INFO_SYNTAX(3ossl), d2i_OSSL_INFO_SYNTAX_POINTER(3ossl), d2i_OSSL_ISSUER_SERIAL(3ossl), d2i_OSSL_NAMED_DAY(3ossl), d2i_OSSL_OBJECT_DIGEST_INFO(3ossl), d2i_OSSL_PRIVILEGE_POLICY_ID(3ossl), d2i_OSSL_ROLE_SPEC_CERT_ID(3ossl), d2i_OSSL_ROLE_SPEC_CERT_ID_SYNTAX(3ossl), d2i_OSSL_TARGET_CERT(3ossl), d2i_OSSL_TARGET(3ossl), d2i_OSSL_TARGETING_INFORMATION(3ossl), d2i_OSSL_TARGETS(3ossl), d2i_OSSL_TIME_PERIOD(3ossl), d2i_OSSL_TIME_SPEC(3ossl), d2i_OSSL_TIME_SPEC_ABSOLUTE(3ossl), d2i_OSSL_TIME_SPEC_DAY(3ossl), d2i_OSSL_TIME_SPEC_MONTH(3ossl), d2i_OSSL_TIME_SPEC_TIME(3ossl), d2i_OSSL_TIME_SPEC_WEEKS(3ossl), d2i_OSSL_TIME_SPEC_X_DAY_OF(3ossl), d2i_OSSL_USER_NOTICE_SYNTAX(3ossl), d2i_OTHERNAME(3ossl), d2i_PBE2PARAM(3ossl), d2i_PBEPARAM(3ossl), d2i_PBKDF2PARAM(3ossl), d2i_PBMAC1PARAM(3ossl), d2i_PKCS12(3ossl), d2i_PKCS12_BAGS(3ossl), d2i_PKCS12_MAC_DATA(3ossl), d2i_PKCS12_SAFEBAG(3ossl), d2i_PKCS12_bio(3ossl), d2i_PKCS12_fp(3ossl), d2i_PKCS7(3ossl), d2i_PKCS7_DIGEST(3ossl), d2i_PKCS7_ENCRYPT(3ossl), d2i_PKCS7_ENC_CONTENT(3ossl), d2i_PKCS7_ENVELOPE(3ossl), d2i_PKCS7_ISSUER_AND_SERIAL(3ossl), d2i_PKCS7_RECIP_INFO(3ossl), d2i_PKCS7_SIGNED(3ossl), d2i_PKCS7_SIGNER_INFO(3ossl), d2i_PKCS7_SIGN_ENVELOPE(3ossl), d2i_PKCS7_bio(3ossl), d2i_PKCS7_fp(3ossl), d2i_PKCS8_PRIV_KEY_INFO(3ossl), d2i_PKCS8_PRIV_KEY_INFO_bio(3ossl), d2i_PKCS8_PRIV_KEY_INFO_fp(3ossl), d2i_PKCS8_bio(3ossl), d2i_PKCS8_fp(3ossl), d2i_PKEY_USAGE_PERIOD(3ossl), d2i_POLICYINFO(3ossl), d2i_POLICYQUALINFO(3ossl), d2i_PROFESSION_INFO(3ossl), d2i_PROXY_CERT_INFO_EXTENSION(3ossl), d2i_PROXY_POLICY(3ossl), d2i_RSA_OAEP_PARAMS(3ossl), d2i_RSA_PSS_PARAMS(3ossl), d2i_SCRYPT_PARAMS(3ossl), d2i_SCT_LIST(3ossl), d2i_SXNET(3ossl), d2i_SXNETID(3ossl), d2i_TS_ACCURACY(3ossl), d2i_TS_MSG_IMPRINT(3ossl), d2i_TS_MSG_IMPRINT_bio(3ossl), d2i_TS_MSG_IMPRINT_fp(3ossl), d2i_TS_REQ(3ossl), d2i_TS_REQ_bio(3ossl), d2i_TS_REQ_fp(3ossl), d2i_TS_RESP(3ossl), d2i_TS_RESP_bio(3ossl), d2i_TS_RESP_fp(3ossl), d2i_TS_STATUS_INFO(3ossl), d2i_TS_TST_INFO(3ossl), d2i_TS_TST_INFO_bio(3ossl), d2i_TS_TST_INFO_fp(3ossl), d2i_USERNOTICE(3ossl), d2i_X509(3ossl), d2i_X509_bio(3ossl), d2i_X509_fp(3ossl), d2i_X509_ACERT(3ossl), d2i_X509_ACERT_bio(3ossl), d2i_X509_ACERT_fp(3ossl), d2i_X509_ALGOR(3ossl), d2i_X509_ALGORS(3ossl), d2i_X509_ATTRIBUTE(3ossl), d2i_X509_CERT_AUX(3ossl), d2i_X509_CINF(3ossl), d2i_X509_CRL(3ossl), d2i_X509_CRL_INFO(3ossl), d2i_X509_CRL_bio(3ossl), d2i_X509_CRL_fp(3ossl), d2i_X509_EXTENSION(3ossl), d2i_X509_EXTENSIONS(3ossl), d2i_X509_NAME(3ossl), d2i_X509_NAME_ENTRY(3ossl), d2i_X509_PUBKEY(3ossl), d2i_X509_PUBKEY_bio(3ossl), d2i_X509_PUBKEY_fp(3ossl), d2i_X509_REQ(3ossl), d2i_X509_REQ_INFO(3ossl), d2i_X509_REQ_bio(3ossl), d2i_X509_REQ_fp(3ossl), d2i_X509_REVOKED(3ossl), d2i_X509_SIG(3ossl), d2i_X509_VAL(3ossl), i2d_ACCESS_DESCRIPTION(3ossl), i2d_ADMISSIONS(3ossl), i2d_ADMISSION_SYNTAX(3ossl), i2d_ASIdOrRange(3ossl), i2d_ASIdentifierChoice(3ossl), i2d_ASIdentifiers(3ossl), i2d_ASN1_BIT_STRING(3ossl), i2d_ASN1_BMPSTRING(3ossl), i2d_ASN1_ENUMERATED(3ossl), i2d_ASN1_GENERALIZEDTIME(3ossl), i2d_ASN1_GENERALSTRING(3ossl), i2d_ASN1_IA5STRING(3ossl), i2d_ASN1_INTEGER(3ossl), i2d_ASN1_NULL(3ossl), i2d_ASN1_OBJECT(3ossl), i2d_ASN1_OCTET_STRING(3ossl), i2d_ASN1_PRINTABLE(3ossl), i2d_ASN1_PRINTABLESTRING(3ossl), i2d_ASN1_SEQUENCE_ANY(3ossl), i2d_ASN1_SET_ANY(3ossl), i2d_ASN1_T61STRING(3ossl), i2d_ASN1_TIME(3ossl), i2d_ASN1_TYPE(3ossl), i2d_ASN1_UNIVERSALSTRING(3ossl), i2d_ASN1_UTCTIME(3ossl), i2d_ASN1_UTF8STRING(3ossl), i2d_ASN1_VISIBLESTRING(3ossl), i2d_ASN1_bio_stream(3ossl), i2d_ASRange(3ossl), i2d_AUTHORITY_INFO_ACCESS(3ossl), i2d_AUTHORITY_KEYID(3ossl), i2d_BASIC_CONSTRAINTS(3ossl), i2d_CERTIFICATEPOLICIES(3ossl), i2d_CMS_ContentInfo(3ossl), i2d_CMS_ReceiptRequest(3ossl), i2d_CMS_bio(3ossl), i2d_CRL_DIST_POINTS(3ossl), i2d_DHxparams(3ossl), i2d_DIRECTORYSTRING(3ossl), i2d_DISPLAYTEXT(3ossl), i2d_DIST_POINT(3ossl), i2d_DIST_POINT_NAME(3ossl), i2d_DSA_SIG(3ossl), i2d_ECDSA_SIG(3ossl), i2d_ECPKParameters(3ossl), i2d_EDIPARTYNAME(3ossl), i2d_ESS_CERT_ID(3ossl), i2d_ESS_CERT_ID_V2(3ossl), i2d_ESS_ISSUER_SERIAL(3ossl), i2d_ESS_SIGNING_CERT(3ossl), i2d_ESS_SIGNING_CERT_V2(3ossl), i2d_EXTENDED_KEY_USAGE(3ossl), i2d_GENERAL_NAME(3ossl), i2d_GENERAL_NAMES(3ossl), i2d_IPAddressChoice(3ossl), i2d_IPAddressFamily(3ossl), i2d_IPAddressOrRange(3ossl), i2d_IPAddressRange(3ossl), i2d_ISSUER_SIGN_TOOL(3ossl), i2d_ISSUING_DIST_POINT(3ossl), i2d_NAMING_AUTHORITY(3ossl), i2d_NETSCAPE_CERT_SEQUENCE(3ossl), i2d_NETSCAPE_SPKAC(3ossl), i2d_NETSCAPE_SPKI(3ossl), i2d_NOTICEREF(3ossl), i2d_OCSP_BASICRESP(3ossl), i2d_OCSP_CERTID(3ossl), i2d_OCSP_CERTSTATUS(3ossl), i2d_OCSP_CRLID(3ossl), i2d_OCSP_ONEREQ(3ossl), i2d_OCSP_REQINFO(3ossl), i2d_OCSP_REQUEST(3ossl), i2d_OCSP_RESPBYTES(3ossl), i2d_OCSP_RESPDATA(3ossl), i2d_OCSP_RESPID(3ossl), i2d_OCSP_RESPONSE(3ossl), i2d_OCSP_REVOKEDINFO(3ossl), i2d_OCSP_SERVICELOC(3ossl), i2d_OCSP_SIGNATURE(3ossl), i2d_OCSP_SINGLERESP(3ossl), i2d_OSSL_AA_DIST_POINT(3ossl), i2d_OSSL_ALLOWED_ATTRIBUTES_CHOICE(3ossl), i2d_OSSL_ALLOWED_ATTRIBUTES_ITEM(3ossl), i2d_OSSL_ALLOWED_ATTRIBUTES_SYNTAX(3ossl), i2d_OSSL_ATAV(3ossl), i2d_OSSL_ATTRIBUTE_DESCRIPTOR(3ossl), i2d_OSSL_ATTRIBUTE_MAPPING(3ossl), i2d_OSSL_ATTRIBUTE_MAPPINGS(3ossl), i2d_OSSL_ATTRIBUTE_TYPE_MAPPING(3ossl), i2d_OSSL_ATTRIBUTE_VALUE_MAPPING(3ossl), i2d_OSSL_ATTRIBUTES_SYNTAX(3ossl), i2d_OSSL_AUTHORITY_ATTRIBUTE_ID_SYNTAX(3ossl), i2d_OSSL_BASIC_ATTR_CONSTRAINTS(3ossl), i2d_OSSL_CMP_ATAVS(3ossl), i2d_OSSL_CMP_MSG(3ossl), i2d_OSSL_CMP_PKIHEADER(3ossl), i2d_OSSL_CMP_PKISI(3ossl), i2d_OSSL_CRMF_CERTID(3ossl), i2d_OSSL_CRMF_CERTTEMPLATE(3ossl), i2d_OSSL_CRMF_ENCRYPTEDKEY(3ossl), i2d_OSSL_CRMF_ENCRYPTEDVALUE(3ossl), i2d_OSSL_CRMF_MSG(3ossl), i2d_OSSL_CRMF_MSGS(3ossl), i2d_OSSL_CRMF_PBMPARAMETER(3ossl), i2d_OSSL_CRMF_PKIPUBLICATIONINFO(3ossl), i2d_OSSL_CRMF_SINGLEPUBINFO(3ossl), i2d_OSSL_HASH(3ossl), i2d_OSSL_DAY_TIME(3ossl), i2d_OSSL_DAY_TIME_BAND(3ossl), i2d_OSSL_IETF_ATTR_SYNTAX(3ossl), i2d_OSSL_INFO_SYNTAX(3ossl), i2d_OSSL_INFO_SYNTAX_POINTER(3ossl), i2d_OSSL_ISSUER_SERIAL(3ossl), i2d_OSSL_NAMED_DAY(3ossl), i2d_OSSL_OBJECT_DIGEST_INFO(3ossl), i2d_OSSL_PRIVILEGE_POLICY_ID(3ossl), i2d_OSSL_ROLE_SPEC_CERT_ID(3ossl), i2d_OSSL_ROLE_SPEC_CERT_ID_SYNTAX(3ossl), i2d_OSSL_TARGET_CERT(3ossl), i2d_OSSL_TARGET(3ossl), i2d_OSSL_TARGETING_INFORMATION(3ossl), i2d_OSSL_TARGETS(3ossl), i2d_OSSL_TIME_PERIOD(3ossl), i2d_OSSL_TIME_SPEC(3ossl), i2d_OSSL_TIME_SPEC_ABSOLUTE(3ossl), i2d_OSSL_TIME_SPEC_DAY(3ossl), i2d_OSSL_TIME_SPEC_MONTH(3ossl), i2d_OSSL_TIME_SPEC_TIME(3ossl), i2d_OSSL_TIME_SPEC_WEEKS(3ossl), i2d_OSSL_TIME_SPEC_X_DAY_OF(3ossl), i2d_OSSL_USER_NOTICE_SYNTAX(3ossl), i2d_OTHERNAME(3ossl), i2d_PBE2PARAM(3ossl), i2d_PBEPARAM(3ossl), i2d_PBKDF2PARAM(3ossl), i2d_PBMAC1PARAM(3ossl), i2d_PKCS12(3ossl), i2d_PKCS12_BAGS(3ossl), i2d_PKCS12_MAC_DATA(3ossl), i2d_PKCS12_SAFEBAG(3ossl), i2d_PKCS12_bio(3ossl), i2d_PKCS12_fp(3ossl), i2d_PKCS7(3ossl), i2d_PKCS7_DIGEST(3ossl), i2d_PKCS7_ENCRYPT(3ossl), i2d_PKCS7_ENC_CONTENT(3ossl), i2d_PKCS7_ENVELOPE(3ossl), i2d_PKCS7_ISSUER_AND_SERIAL(3ossl), i2d_PKCS7_NDEF(3ossl), i2d_PKCS7_RECIP_INFO(3ossl), i2d_PKCS7_SIGNED(3ossl), i2d_PKCS7_SIGNER_INFO(3ossl), i2d_PKCS7_SIGN_ENVELOPE(3ossl), i2d_PKCS7_bio(3ossl), i2d_PKCS7_fp(3ossl), i2d_PKCS8PrivateKeyInfo_bio(3ossl), i2d_PKCS8PrivateKeyInfo_fp(3ossl), i2d_PKCS8_PRIV_KEY_INFO(3ossl), i2d_PKCS8_PRIV_KEY_INFO_bio(3ossl), i2d_PKCS8_PRIV_KEY_INFO_fp(3ossl), i2d_PKCS8_bio(3ossl), i2d_PKCS8_fp(3ossl), i2d_PKEY_USAGE_PERIOD(3ossl), i2d_POLICYINFO(3ossl), i2d_POLICYQUALINFO(3ossl), i2d_PROFESSION_INFO(3ossl), i2d_PROXY_CERT_INFO_EXTENSION(3ossl), i2d_PROXY_POLICY(3ossl), i2d_RSA_OAEP_PARAMS(3ossl), i2d_RSA_PSS_PARAMS(3ossl), i2d_SCRYPT_PARAMS(3ossl), i2d_SCT_LIST(3ossl), i2d_SXNET(3ossl), i2d_SXNETID(3ossl), i2d_TS_ACCURACY(3ossl), i2d_TS_MSG_IMPRINT(3ossl), i2d_TS_MSG_IMPRINT_bio(3ossl), i2d_TS_MSG_IMPRINT_fp(3ossl), i2d_TS_REQ(3ossl), i2d_TS_REQ_bio(3ossl), i2d_TS_REQ_fp(3ossl), i2d_TS_RESP(3ossl), i2d_TS_RESP_bio(3ossl), i2d_TS_RESP_fp(3ossl), i2d_TS_STATUS_INFO(3ossl), i2d_TS_TST_INFO(3ossl), i2d_TS_TST_INFO_bio(3ossl), i2d_TS_TST_INFO_fp(3ossl), i2d_USERNOTICE(3ossl), i2d_X509(3ossl), i2d_X509_bio(3ossl), i2d_X509_fp(3ossl), i2d_X509_ACERT(3ossl), i2d_X509_ACERT_bio(3ossl), i2d_X509_ACERT_fp(3ossl), i2d_X509_ALGOR(3ossl), i2d_X509_ALGORS(3ossl), i2d_X509_ATTRIBUTE(3ossl), i2d_X509_CERT_AUX(3ossl), i2d_X509_CINF(3ossl), i2d_X509_CRL(3ossl), i2d_X509_CRL_INFO(3ossl), i2d_X509_CRL_bio(3ossl), i2d_X509_CRL_fp(3ossl), i2d_X509_EXTENSION(3ossl), i2d_X509_EXTENSIONS(3ossl), i2d_X509_NAME(3ossl), i2d_X509_NAME_ENTRY(3ossl), i2d_X509_PUBKEY(3ossl), i2d_X509_PUBKEY_bio(3ossl), i2d_X509_PUBKEY_fp(3ossl), i2d_X509_REQ(3ossl), i2d_X509_REQ_INFO(3ossl), i2d_X509_REQ_bio(3ossl), i2d_X509_REQ_fp(3ossl), i2d_X509_REVOKED(3ossl), i2d_X509_SIG(3ossl), i2d_X509_VAL(3ossl): convert objects from/to ASN.1/DER representation
d2i_DSAPrivateKey(3ossl), d2i_DSAPrivateKey_bio(3ossl), d2i_DSAPrivateKey_fp(3ossl), d2i_DSAPublicKey(3ossl), d2i_DSA_PUBKEY(3ossl), d2i_DSA_PUBKEY_bio(3ossl), d2i_DSA_PUBKEY_fp(3ossl), d2i_DSAparams(3ossl), d2i_RSAPrivateKey(3ossl), d2i_RSAPrivateKey_bio(3ossl), d2i_RSAPrivateKey_fp(3ossl), d2i_RSAPublicKey(3ossl), d2i_RSAPublicKey_bio(3ossl), d2i_RSAPublicKey_fp(3ossl), d2i_RSA_PUBKEY(3ossl), d2i_RSA_PUBKEY_bio(3ossl), d2i_RSA_PUBKEY_fp(3ossl), d2i_DHparams(3ossl), d2i_DHparams_bio(3ossl), d2i_DHparams_fp(3ossl), d2i_ECParameters(3ossl), d2i_ECPrivateKey(3ossl), d2i_ECPrivateKey_bio(3ossl), d2i_ECPrivateKey_fp(3ossl), d2i_EC_PUBKEY(3ossl), d2i_EC_PUBKEY_bio(3ossl), d2i_EC_PUBKEY_fp(3ossl), i2d_RSAPrivateKey(3ossl), i2d_RSAPrivateKey_bio(3ossl), i2d_RSAPrivateKey_fp(3ossl), i2d_RSAPublicKey(3ossl), i2d_RSAPublicKey_bio(3ossl), i2d_RSAPublicKey_fp(3ossl), i2d_RSA_PUBKEY(3ossl), i2d_RSA_PUBKEY_bio(3ossl), i2d_RSA_PUBKEY_fp(3ossl), i2d_DHparams(3ossl), i2d_DHparams_bio(3ossl), i2d_DHparams_fp(3ossl), i2d_DSAPrivateKey(3ossl), i2d_DSAPrivateKey_bio(3ossl), i2d_DSAPrivateKey_fp(3ossl), i2d_DSAPublicKey(3ossl), i2d_DSA_PUBKEY(3ossl), i2d_DSA_PUBKEY_bio(3ossl), i2d_DSA_PUBKEY_fp(3ossl), i2d_DSAparams(3ossl), i2d_ECParameters(3ossl), i2d_ECPrivateKey(3ossl), i2d_ECPrivateKey_bio(3ossl), i2d_ECPrivateKey_fp(3ossl), i2d_EC_PUBKEY(3ossl), i2d_EC_PUBKEY_bio(3ossl), i2d_EC_PUBKEY_fp(3ossl): DEPRECATED
d_yield_proc(3): Invisible dialog procedure that yields CPU time slices. Allegro game programming library
dar_cp(1): 'cp' clone command that is able to copy data located after an I/O error
dcmprscp(1): DICOM basic grayscale print management SCP
dcmqrscp(1): DICOM image archive (central test node)
dcmrecv(1): Simple DICOM storage SCP (receiver)
dhcdrop(8): program for searching and suppress false DHCP servers in Ethernet
dhclient-script(8): DHCP client network configuration script
dhclient.conf(5): DHCP client configuration file
dhclient.leases(5): DHCP client lease database
dhcp-eval(5): ISC DHCP conditional evaluation
dhcp-options(5): Dynamic Host Configuration Protocol options
dhcp6c(8): DHCPv6 client daemon
dhcp6c.conf(5): DHCPv6 client configuration file
dhcp6ctl(8): DHCPv6 client and server control utility
dhcp6relay(8): DHCPv6 relay agent
dhcp6s(8): DHCPv6 server
dhcp6s.conf(5): DHCPv6 server configuration file
dhcp_probe(8): locate DCHP and BootP servers on a directly-attached network
dhcp_probe.cf(5): configuration file for dhcp_probe
dhcpcd(8): a DHCP client
dhcpcd-curses(8): a curses frontend for network configuration
dhcpcd-gtk(8): a GTK+ frontend for network configuration
dhcpcd-online(8): a utility to work out if dhcpcd(8) is in the connected state
dhcpcd-run-hooks(8): DHCP client configuration script
dhcpcd.conf(5): dhcpcd configuration file
dhcpclient(1): Send a DHCP request with provided RADIUS attributes and get the output response
dhcpctl(3), dhcpctl_initialize(3): dhcpctl library initialization
dhcpd(8): Dynamic Host Configuration Protocol Server
dhcpd-pools(1): ISC dhcpd pools usage analysis
dhcpd.conf(5): dhcpd configuration file
dhcpd.leases(5): DHCP client lease database
dhcpdump(8): DHCP packet dumper
dhcping(8): send a DHCP request to DHCP server to see if it's up and running
dircproxy(1): Detachable Internal Relay Chat Proxy Server
dircproxy-crypt(1): Generate encrypted password for dircproxy
dns-dhcp(1): generate dhcp tables from DNS tables "dns-dhcp(1)" "generate dhcp tables from DNS tables"
dns2tcpc(1): A tunneling tool that encapsulate TCP traffic over DNS
dns2tcpd(1): A tunneling tool that encapsulate TCP traffic over DNS
dnsjit.core.object.tcp(3): A TCP segment header
dnsjit.output.dnscli(3): DNS aware UDP/TCP/TLS client
dnsjit.output.tcpcli(3): Simple, length aware, TCP client
dnsmasq(8): A lightweight DHCP and caching DNS server
drawterm(1), drawterm (1): connection to cpu, fs, and auth servers
dtcpauth(8): Manipulate POP Authorization DB
dtcpc(8): Dynamic Tunnel Configuration Protocol client
dtcpclient(8): Dynamic Tunnel Configuration Protocol client
dtcps(8): Dynamic Tunnel Configuration Protocol daemon
e2cp(1): copies files from/to an e2fs filesystem
echoping(1): tests a remote host with TCP or UDP
eclat-cpimg(1), eclat-copy-image(1): create a copy of the Amazon image
eclat-cpsnap(1), eclat-copy-snapshot(1): copy snapshot from another region
ecpg(1): embedded SQL C preprocessor
ecpp(7): template-language for tntnet (8)
ecppc(1): compiler for ecpp (7)
ecppl(1): language-extractor for ecpp (7)
ecppll(1): language-linker for ecpp
eiskaltdcpp-cli-jsonrpc(1), EiskaltDC++_CLI(1): simple command line interface for EiskaltDC++ Daemon written on perl
eiskaltdcpp-cli-xmlrpc(1), EiskaltDC++_CLI(1): simple command line interface for EiskaltDC++ Daemon written on perl
eiskaltdcpp-daemon(1): simple daemon controllable via XMLRPC or JSONRPC
eiskaltdcpp-gtk(1), EiskaltDC++_Gtk(1): GUI based on Gtk (based on FreeDC++ and LinuxDC++)
escputil(1): maintain Epson Stylus inkjet printers
fi_endpoint(3): Fabric endpoint operations fi_endpoint / fi_scalable_ep / fi_passive_ep / fi_close Allocate or close an endpoint. fi_ep_bind Associate an endpoint with hardware resources, such as event queues, completion queues, counters, address vectors, or shared transmit/receive contexts. fi_scalable_ep_bind Associate a scalable endpoint with an address vector fi_pep_bind Associate a passive endpoint with an event queue fi_enable Transitions an active endpoint into an enabled state. fi_cancel Cancel a pending asynchronous data transfer fi_ep_alias Create an alias to the endpoint fi_control Control endpoint operation. fi_getopt / fi_setopt Get or set endpoint options. fi_rx_context / fi_tx_context / fi_srx_context / fi_stx_context Open a transmit or receive context. fi_tc_dscp_set / fi_tc_dscp_get Convert between a DSCP value and a network traffic class fi_rx_size_left / fi_tx_size_left (DEPRECATED) Query the lower bound on how many RX/TX operations may be posted without an operation returning -FI_EAGAIN. This functions have been deprecated and will be removed in a future version of the library
fi_tcp(7): The msg sockets Fabric Provider
fixmacps(1): filter to fix Macintosh documents with saner version of md
flowgrind(1): advanced TCP traffic generator for Linux, FreeBSD, and Mac OS X
flowgrind-stop(1): helper tool for the advanced TCP traffic generator flowgrind
flowgrindd(1): advanced TCP traffic generator for Linux, FreeBSD, and Mac OS X
fprcp(1): Free Pascal windres preprocessor program
fracplanet(1): Create and view random fractal terrain and planets
freebcp(1): bulk loading utility for Sybase and Microsoft databases
ftp-cp(1): copy files from from one place to another using passive mode ftp
ftpcp(1): copy files from a FTP server to the local machine
gbz80(7): CPU opcode reference
gcp(1), cp(1): copy files and directories
gcpio(1): copy files to and from archives
gdiffmk(1): mark differences between groff / nroff / troff files nr *groff_gdiffmk_1_man_C n[.cp] do-fallback 0 !n(.f .nr do-fallback 1 " mandoc n(.g .if !d MR .nr do-fallback 1 " older groff !n(.g .nr do-fallback 1 " non-groff *roff n[do-fallback] {
gdnsd-plugin-tcp_connect(8): gdnsd TCP monitoring plugin
geocpset(1): adds control points based on geometric position
geotifcp(1): Copy TIFF with updated GeoTIFF Metadata
gh-codespace-cp(1): Copy files between local and remote file systems
git-cp(1): Copy a file keeping its history
git-scp(1): Copy files to SSH compatible git-remote
glilypond(1): embed LilyPond musical notation in groff documents nr *groff_glilypond_1_man_C n[.cp] do-fallback 0 !n(.f .nr do-fallback 1 " mandoc n(.g .if !d MR .nr do-fallback 1 " older groff !n(.g .nr do-fallback 1 " non-groff *roff n[do-fallback] {
gnutls_dh_params_cpy(3): API function
gnutls_pkcs11_privkey_cpy(3): API function
gnutls_x509_crt_cpy_crl_dist_points(3): API function
gnutls_x509_privkey_cpy(3): API function
gperl(1): execute Perl commands in groff documents nr *groff_gperl_1_man_C n[.cp] do-fallback 0 !n(.f .nr do-fallback 1 " mandoc n(.g .if !d MR .nr do-fallback 1 " older groff !n(.g .nr do-fallback 1 " non-groff *roff n[do-fallback] {
gpinyin(1): use Hanyu Pinyin Chinese in groff documents nr *groff_gpinyin_1_man_C n[.cp] do-fallback 0 !n(.f .nr do-fallback 1 " mandoc n(.g .if !d MR .nr do-fallback 1 " older groff !n(.g .nr do-fallback 1 " non-groff *roff n[do-fallback] {
gplcpt(1): convert GIMP colour palette (gpl) to GMT colour palette table (cpt)
grap2graph(1): convert a grap diagram into a cropped image nr *groff_grap2graph_1_man_C n[.cp] do-fallback 0 !n(.f .nr do-fallback 1 " mandoc n(.g .if !d MR .nr do-fallback 1 " older groff !n(.g .nr do-fallback 1 " non-groff *roff n[do-fallback] {
groff_hdtbl(7): Heidelberger table macros for GNU roff nr *groff_groff_hdtbl_7_man_C n[.cp] do-fallback 0 !n(.f .nr do-fallback 1 " mandoc n(.g .if !d MR .nr do-fallback 1 " older groff !n(.g .nr do-fallback 1 " non-groff *roff n[do-fallback] {
groff_man_style(7): GNU roff man page tutorial and style guide nr *groff_groff_man_7_man_C n[.cp] do-fallback 0 !n(.f .nr do-fallback 1 " mandoc n(.g .if !d MR .nr do-fallback 1 " older groff !n(.g .nr do-fallback 1 " non-groff *roff n[do-fallback] {
groff_rfc1345(7): special character names from RFC 1345 and Vim digraphs nr *groff_groff_rfc1345_7_man_C n[.cp] do-fallback 0 !n(.f .nr do-fallback 1 " mandoc n(.g .if !d MR .nr do-fallback 1 " older groff !n(.g .nr do-fallback 1 " non-groff *roff n[do-fallback] {
gropdf(1): groff output driver for Portable Document Format nr *groff_gropdf_1_man_C n[.cp] do-fallback 0 !n(.f .nr do-fallback 1 " mandoc n(.g .if !d MR .nr do-fallback 1 " older groff !n(.g .nr do-fallback 1 " non-groff *roff n[do-fallback] {
hashcp(1), HashCp(1): Hash and copy the contents of a file or stdin
hping3(8): send (almost) arbitrary TCP/IP packets to network hosts
htop(1), pcp-htop(1): interactive process viewer
hwloc-calc(1): Operate on cpu mask strings and objects
hwloc-distrib(1): Build a number of cpu masks distributed on the system
hwloc-gather-cpuid(1): Dumps the relevant x86 cpuid values for later (possibly offline) usage
hwlocality_cpubinding(3): CPU binding
hwlocality_cpukinds(3): Kinds of CPU cores
hwlocality_helper_find_covering(3): Finding Objects covering at least CPU set
hwlocality_helper_find_inside(3): Finding Objects inside a CPU set
hwlocality_helper_nodeset_convert(3): Converting between CPU sets and node sets
hwlocality_helper_topology_sets(3): CPU and node sets of entire topologies
hwlocality_object_sets(3): Object Sets (hwloc_cpuset_t and hwloc_nodeset_t)
hwstat(1), HWSTAT(1): command line tool to display CPU temp and battery infos
icpfind(1): Use heuristic control-point detection strategies
icpld(1): Internet Connection Performance Logging Daemon
id3cp(1): Copies tags from one file to another
ifnames2.69(1): Extract CPP conditionals from a set of files
ifnames2.72(1): Extract CPP conditionals from a set of files
imv(1), icp(1): Rename or copy a file by editing the destination name using GNU readline
inetcat(1): Opens a read/write interface via STDIN/STDOUT to a TCP port on a usbmux device
ip.tcp.acceptor(3em), Emilua(3em): Lua execution engine
ip.tcp.listen(3em), Emilua(3em): Lua execution engine
ip.tcp.socket(3em), Emilua(3em): Lua execution engine
ipfixcol2-tcp-input(7): TCP (input plugin)
iproxy(1): A proxy that binds local TCP ports to be forwarded to the specified ports on a usbmux device
ipsumdump(1): produce ASCII summary of network traffic or tcpdump(1) trace
isal(4): driver for AES acceleration on x86 CPUs
jitterentropy(3): CPU Jitter Random Number Generator
jk_cp(8): a utility to copy files including permissions and libraries into a jail
jumpgate(8): -- a TCP connection forwarder
kcpolymgr(1): command line interface to manage the polymorphic database
kcpolytest(1): command line interface to test the polymorphic database
kcprototest(1): command line interface to test the prototype database
kea-dhcp-ddns(8): DHCP-DDNS process in Kea
kea-dhcp4(8): DHCPv4 server in Kea
kea-dhcp6(8): DHCPv6 server in Kea
lacp2(3): lacp2: general matrix, convert real to complex
lacpy(3): lacpy: copy matrix
lat_connect(8): measure interprocess connection latency via TCP/IP
lat_ops(8): basic CPU operation parallelism
lat_tcp(8): measure interprocess communication latency via TCP/IP
latcp(8): LAT Control Program
lbrate(1): extract/decompress CP/M LBR archives
ldns_tcp_send_query(3), ldns_tcp_read_wire(3), ldns_tcp_connect(3): tcp queries
libowfat_socket_accept4(3), socket_accept4(3): accept an IPv4 TCP connection on a socket
libowfat_socket_accept4_makenonblocking(3), socket_accept4_makenonblocking(3): accept an IPv4 TCP connection on a socket and set it to non-blocking I/O
libowfat_socket_accept4_makenonblocking_setcloseonexec(3), socket_accept4_makenonblocking_setcloseonexec(3): accept an IPv4 TCP connection on a socket and set it to non-blocking I/O and close-on-exec SYNTAX #include <libowfat/socket.h> int socket_accept4_makenonblocking_setcloseonexec(int s,char ip[4],uint16 *port);
libowfat_socket_accept4_setcloseonexec(3), socket_accept4_setcloseonexec(3): accept an IPv4 TCP connection on a socket and set it to close on exec
libowfat_socket_accept6(3), socket_accept6(3): accept an IPv6 TCP connection on a socket
libowfat_socket_accept6_makenonblocking(3), socket_accept6_makenonblocking(3): accept an IPv6 TCP connection on a socket
libowfat_socket_accept6_makenonblocking_setcloseonexec(3), socket_accept6_makenonblocking_setcloseonexec(3): accept an IPv6 TCP connection on a socket and set it to non-blocking I/O and close-on-exec SYNTAX #include <libowfat/socket.h> int socket_accept6_makenonblocking_setcloseonexec(int s,char ip[4],uint16 *port,uint16* scope_id);
libowfat_socket_accept6_setcloseonexec(3), socket_accept6_setcloseonexec(3): accept an IPv6 TCP connection on a socket
libowfat_socket_connect4(3), socket_connect4(3): attempt to make a TCP connection
libowfat_socket_connect6(3), socket_connect6(3): attempt to make a TCP connection
libowfat_socket_fastopen(3), socket_fastopen(3): enable TCP Fast Open on a server-side TCP socket
libowfat_socket_fastopen_connect4(3), socket_fastopen_connect4(3): make a TCP connection and send some data
libowfat_socket_fastopen_connect6(3), socket_fastopen_connect6(3): make a TCP connection and send some data
libowfat_socket_listen(3), socket_listen(3): attempt to make a TCP connection
libowfat_socket_quickack(3), socket_quickack(3): turn TCP Quick ACK mode on or off
libowfat_socket_tcp4(3), socket_tcp4(3): create a non-blocking TCP/IP stream socket
libowfat_socket_tcp4b(3), socket_tcp4b(3): create a blocking TCP/IP stream socket
libowfat_socket_tcp6(3), socket_tcp6(3): create a non-blocking IPv6 TCP/IP stream socket
libowfat_socket_tcp6b(3), socket_tcp6b(3): create a blocking IPv6 TCP/IP stream socket

home | help

Header And Logo

Peripheral Links

Site Navigation

FreeBSD Manual Pages

Header And Logo

Peripheral Links

Search

Site Navigation

FreeBSD Manual Pages