Skip site
navigation (1)Skip section navigation (2)
FreeBSD Manual Pages
- VOP_ACCESS(9), VOP_ACCESSX(9)
- check access permissions of a file or Unix domain socket
- au_bsm_to_domain(3), au_domain_to_bsm(3)
- convert between BSM and local protocol domains
- cpuset_getdomain(2), cpuset_setdomain(2)
- manage memory domain policy
- domain_add(9), pfctlinput(9), pffinddomain(9), pffindproto(9), pffindtype(9), DOMAIN_SET(9)
- network domain management
- domainname(1)
- set or print name of current YP/NIS domain
- domainset(9), domainset(9)(9)
- domainset functions and operation
- getdomainname(3), setdomainname(3)
- get/set the NIS domain name of current host
- getpeereid(3)
- get the effective credentials of a UNIX-domain peer
- ibv_alloc_pd(3), ibv_dealloc_pd(3)
- allocate or deallocate a protection domain (PDs)
- ibv_open_xrcd(3), ibv_close_xrcd(3)
- open or close an XRC protection domain (XRCDs)
- ieee80211_regdomain(9)
- 802.11 regulatory support
- krb5_check_transited(3), krb5_check_transited_realms(3), krb5_domain_x500_decode(3), krb5_domain_x500_encode(3)
- realm transit verification and encoding/decoding functions
- lib80211(3), lib80211_alloc_regdata(3), lib80211_free_regdata(3), lib80211_regdomain_readconfig(3), lib80211_regdomain_cleanup(3), lib80211_regdomain_findbysku(3), lib80211_regdomain_findbyname(3), lib80211_country_findbycc(3), lib80211_country_findbyname(3)
- manage net80211 configuration and regulatory database
- regdomain(5), regdomain.xml(5)
- 802.11 wireless regulatory definitions
- sysdecode_enum(3), sysdecode_acltype(3), sysdecode_atfd(3), sysdecode_extattrnamespace(3), sysdecode_fadvice(3), sysdecode_fcntl_cmd(3), sysdecode_getfsstat_mode(3), sysdecode_getrusage_who(3), sysdecode_idtype(3), sysdecode_ipproto(3), sysdecode_kldsym_cmd(3), sysdecode_kldunload_flags(3), sysdecode_lio_listio_mode(3), sysdecode_madvice(3), sysdecode_minherit_flags(3), sysdecode_msgctl_cmd(3), sysdecode_nfssvc_flags(3), sysdecode_pathconf_name(3), sysdecode_prio_which(3), sysdecode_procctl_cmd(3), sysdecode_ptrace_request(3), sysdecode_rlimit(3), sysdecode_rtprio_function(3), sysdecode_scheduler_policy(3), sysdecode_sctp_pr_policy(3), sysdecode_sctp_sinfo_flags(3), sysdecode_semctl_cmd(3), sysdecode_shmctl_cmd(3), sysdecode_shutdown_how(3), sysdecode_sigbus_code(3), sysdecode_sigchld_code(3), sysdecode_sigfpe_code(3), sysdecode_sigill_code(3), sysdecode_signal(3), sysdecode_sigprocmask_how(3), sysdecode_sigsegv_code(3), sysdecode_sigtrap_code(3), sysdecode_sockaddr_family(3), sysdecode_socketdomain(3), sysdecode_sockettype(3), sysdecode_sockopt_level(3), sysdecode_sysarch_number(3), sysdecode_umtx_op(3), sysdecode_vmresult(3), sysdecode_whence(3)
- lookup name of various enumerated values
- trimdomain(3)
- trim the current domain name from a host name
- unix(4)
- UNIX-domain protocol family
- whois(1)
- Internet domain name and network number directory service
- ypbind(8)
- NIS domain binding daemon
- ALTER_DOMAIN(7)
- change the definition of a domain
- CREATE_DOMAIN(7)
- define a new domain
- CURLOPT_ABSTRACT_UNIX_SOCKET(3)
- abstract Unix domain socket
- CURLOPT_UNIX_SOCKET_PATH(3)
- Unix domain socket
- DROP_DOMAIN(7)
- remove a domain
- Sympa::Tools::Domains(3Sympa)
- Domains-related functions
- adcli(8)
- Tool for performing actions on an Active Directory domain
- ares_expand_name(3)
- Expand a DNS-encoded domain name
- ares_search(3)
- Initiate a DNS query with domain search
- artsagg(l)
- utility to aggregate ARTS objects in time domain
- artsasagg(l)
- utility to aggregate AS matrix objects in time domain
- artsintfmagg(l)
- utility to aggregate interface matrix objects in time domain
- artsnetagg(l)
- utility to aggregate net matrix objects in time domain
- artsnexthopagg(l)
- utility to aggregate nexthop table objects in time domain
- artsportagg(l)
- utility to aggregate port table objects in time domain
- artsportmagg(l)
- utility to aggregate port matrix objects in time domain
- artsprotoagg(l)
- utility to aggregate protocol table objects in time domain
- au_domain(3), au_bsm_to_domain(3), au_domain_to_bsm(3)
- convert between BSM and local protocol domains
- bind_textdomain_codeset(3)
- set encoding of message translations
- bindtextdomain(3)
- set directory containing message catalogs
- cgi_cookie_authority(3), cgi_cookie_authority (3)
- determine the cookie authority for a domain
- clfdomainsplit(1)
- split Common-Log Format web logs based on domain name
- convert-dom-db(1)
- prepare domain to owner mappings for Analog
- dk-filter(8)
- DomainKeys filter for sendmail
- dlint(8)
- Internet Domain Name System (DNS) error checking utility
- dns2blackhole(8)
- Malware Prevention through Domain Blocking (Black Hole)
- dnsqr(1)
- asks for records of type t under the domain name fqdn
- doc(8)
- diagnose unhealthy DNS domains
- domain(8)
- nnrpd domain resolver
- domain_server(3)
- generic DOMAIN server
- enma(1)
- A milter program for domain authentication technologies
- explain_getdomainname(3)
- explain getdomainname(2) errors require_index { }
- explain_getdomainname_or_die(3)
- get domain name and report errors require_index { "explain_getdomainname_or_die(3)"
- explain_setdomainname(3)
- explain setdomainname(2) errors require_index { }
- explain_setdomainname_or_die(3)
- set domain name and report errors require_index { "explain_setdomainname_or_die(3)"
- fi_domain(3)
- Open a fabric access domain
- findomain(1), Findomain(1)
- manual page for Findomain 5.0.0
- geography(3), REarth(3), SetREarth(3), BadAngle(3), AngleIsOK(3), AngleIsBad(3), AngleFmDeg(3), AngleToDeg(3), AngleFmRad(3), AngleToRad(3), ISin(3), ICos(3), GeoPtSetDeg(3), GeoPtSetRad(3), GeoPtGetDeg(3), GeoPtGetRad(3), GeoPtIsSomewhere(3), GeoPtIsNowhere(3), GeoPtNowhere(3), MapPtIsSomewhere(3), MapPtIsNowhere(3), MapPtNowhere(3), ScaleMapPt(3), GeoStep(3), GeoDistance(3), GeoQuickDistance(3), Azimuth(3), GCircleX(3), DomainLat(3), DomainLon(3), GwchLon(3), DomainLonPt(3), GwchLonPt(3), LonCmp(3), LatCmp(3), AngleCmp(3), LonBtwn(3), LonBtwn1(3), Rotation(3), NewRotation(3), SetRotation(3), GetRotation(3), DeleteRotation(3), Rotate(3), GeoTime_CalSet(3), GeoTime_JulSet(3), GeoTime_CalToJul(3), GeoTime_JulToCal(3), GeoTime_Incr(3), GeoTime_Cmp(3), GeoTime_Diff(3)
- basic geographic calculations and comparisons
- idn(1)
- Internationalized Domain Names command line tool
- idn2(1)
- Libidn2 Internationalized Domain Names conversion tool
- idn_checkname(3)
- validate an internationalized domain name
- idn_comparenames(3), idn_decodename2(3)
- compare two internationzalized domain names
- idn_decodename(3), idn_decodename2(3)
- decode an internationalized domain name
- idn_encodename(3)
- encode an internationalized domain name
- idncheck(1)
- check an internationalized domain name
- idncmp(1)
- compare internationalized domain names
- idnconv2(1)
- internationalized domain name converter
- irw(1)
- sends data from Unix domain socket to stdout
- krb5_check_transited(3), krb5_check_transited_realms(3), krb5_domain_x500_decode(3), krb5_domain_x500_encode(3)
- realm transit verification and encoding/decoding functions
- ksh(1)
- Public domain Korn shell
- ldns-mx(1)
- print out the mx record(s) for a domain
- ldns-nsec3-hash(1)
- print out the NSEC3 hash for a domain name
- ldns_dname_is_subdomain(3), ldns_dname_str_absolute(3), ldns_dname_label(3)
- check properties of dnames
- libidnkit(3), libidnkitlite(3)
- internationalized domain name handling libraries
- libowfat_dns_name4_domain(3), dns_name4_domain(3)
- construct host name for reverse lookup
- libowfat_dns_name6_domain(3), dns_name6_domain(3)
- construct host name for reverse lookup
- libowfat_io_passfd(3), io_passfd(3)
- pass a file descriptor over a Unix Domain socket
- libowfat_io_receivefd(3), io_receivefd(3)
- receive a file descriptor over a Unix Domain socket
- lircd(8)
- LIRC daemon decodes infrared signals and provides them on a Unix domain socket
- listvdomain(1)
- Lists the members of a virtual domain
- named(8)
- Internet domain name server
- nrcpt_by_domain.conf(5)
- Grouping factor for SMTP sessions by recipient domains
- ocf_heartbeat_VirtualDomain(7)
- Manages virtual domains through the libvirt virtualization framework
- ocf_heartbeat_Xen(7)
- Manages Xen unprivileged domains (DomUs)
- pfstmo_fattal02(1)
- Gradient domain high dynamic range compression
- pfstmo_mantiuk06(1)
- Tone mapping in the contrast domain
- qshape(1)
- Print Postfix queue domain and age distribution
- ralabel(1)
- inserts fixed form or free form metadata labels into argus(8). ralabel supports a number of strategies for labeling including 1) address based, providing free form metadata, country code, geo data and fully qualified domain name (FQDN) labeling; 2)port based, providing free form labels using IANA port definitions, and 3) flow filter, providing free form labels based on argus filter specicfications
- resolver(3), res_ninit(3), res_ourserver_p(3), fp_resstat(3), res_hostalias(3), res_pquery(3), res_nquery(3), res_nsearch(3), res_nquerydomain(3), res_nmkquery(3), res_nsend(3), res_nupdate(3), res_nmkupdate(3), res_nclose(3), res_nsendsigned(3), res_findzonecut(3), res_getservers(3), res_setservers(3), res_ndestroy(3), dn_comp(3), dn_expand(3), hstrerror(3), res_init(3), res_isourserver(3), fp_nquery(3), p_query(3), hostalias(3), res_query(3), res_search(3), res_querydomain(3), res_mkquery(3), res_send(3), res_update(3), res_close(3), herror(3)
- resolver routines
- runidn(1)
- A script to allow applications to use internationalized domain names
- samba-dcerpcd(8)
- This is one of Sambas DCERPC server processes that can listen on sockets where RPC services are offered and is the parent process of the DCERPC services it invokes. Unless separately invoked it is started on demand from smbd or winbind and serves DCERPC only over named pipes (np) as a helper process. This will be the standard setup for most installations (standalone/member server/AD server) unless they modify their startup scripts. Note in when Samba is configured as an Active Directory Domain controller the samba process that invokes smbd will still provide its normal DCERPC services, not samba-dcerpcd. When separately invoked by system startup scripts or a a daemon, the global smb.conf option m[blue]rpc start on demand helpers = falsem[] MUST be set to allow samba-dcerpcd to start standalone
- sg_rep_zones(8)
- send SCSI REPORT ZONES, REALMS or ZONE DOMAINS command
- sockin(1)
- a utility for piping textual program output into a UNIX domain socket
- tcl_idna.tcl87(n), tcl::idna(n)
- Support for normalization of Internationalized Domain Names
- textdomain(3)
- set domain for future gettext() calls
- unixclient(1)
- UNIX domain socket client
- unixserver(1)
- UNIX domain socket server
- updatedd(1)
- client to update dynamic domain name records
- vadduser(1)
- Add a user to a virtual domain
- vdeluser(1)
- Delete users from a virtual domain
- virtual(8)
- Postfix virtual domain mail delivery agent
- vmod_unix(3)
- Utilities for Unix domain sockets
- vrehash(1)
- Reorganize users directoryen" "Renames user directories in a virtual domain to match the currenten" "partitioning scheme
- vsetup(1)
- Sets up a virtual domain for its first use
- vupgrade(1)
- Upgrades the vmailmgr data files for a virtual domain
- xen-vtpmmgr(7), xen-vtpmgr(7)
- Xen virtual TPM stubdomain
- xentop(1)
- displays real-time information about a Xen system and domains
- xl.cfg(5)
- xl domain configuration file syntax
- yadifad(8), YADIFAD(8)
- an authoritative Internet domain name server
- Amazon::SimpleDB::Domain(3)
- a class representing a domain in SimpleDB
- Amazon::SimpleDB::Item(3), Amazon::SimpleBD::Item(3)
- A class representing a domain in SimpleDB
- Amazon::SimpleDB::ListDomainsResponse(3)
- a class representing the response to a successful ListDomains request
- AnyEvent::Socket(3)
- useful IPv4 and IPv6 stuff. also unix domain sockets. and stuff
- Chemistry::Domain(3)
- Class for domains in macromolecules
- Dancer2::Core::DSL(3)
- Dancer2's Domain Specific Language (DSL)
- Data::Domain(3)
- Data description and validation
- Data::Validate::Domain(3)
- Domain and host name validation
- Geo::IP2Location(3)
- Fast lookup of country, region, city, latitude, longitude, ZIP code, time zone, ISP, domain name, connection type, IDD code, area code, weather station code and station, MCC, MNC, mobile carrier brand name, elevation and usage type from IP address by using IP2Location database. It supports both IPv4 and IPv6 addressing. Please visit http://www.ip2location.com for more information
- GeoIP2::Model::Domain(3)
- Model class for the GeoIP2 Domain database
- Gungho::Component::Throttle::Domain(3)
- Throttle By Domain
- IO::Socket::INET(3)
- Object interface for AF_INET domain sockets
- IO::Socket::INET6(3)
- Object interface for AF_INET/AF_INET6 domain sockets
- IO::Socket::UNIX(3)
- Object interface for AF_UNIX domain sockets
- IO::Socket::UNIX::Util(3)
- Unix domain socket utilities
- IP::Country::Medium(3)
- cached lookup of country codes by IP address and domain name
- IP::Country::Slow(3)
- cached lookup of country codes by domain name and IP address
- Locale::TextDomain(3)
- Perl Interface to Uniforum Message Translation
- Locale::libintlFAQ(3), Locale::TextDomain::FAQ(3)
- Frequently asked questions for libintl-perl
- Log::Log4perl::Appender::Socket::UNIX(3), Log::Log4perl::Appender::Socket::UNIX-(3)
- Log to a Unix Domain Socket
- Log::Report::Domain(3)
- administer one text-domain
- Log::Report::Minimal::Domain(3)
- administer one text-domain
- Mail::DKIM(3)
- Signs/verifies Internet mail with DKIM/DomainKey signatures
- Mail::DKIM::AuthorDomainPolicy(3)
- represents an Author Domain Signing Practices (ADSP) record
- Mail::DKIM::DkPolicy(3)
- represents a DomainKeys Sender Signing Policy record
- Mail::DKIM::DkSignature(3)
- represents a DomainKeys-Signature header
- Mail::DKIM::MessageParser(3)
- Signs/verifies Internet mail with DKIM/DomainKey signatures
- Mail::DomainKeys(3)
- A perl implementation of DomainKeys
- Mail::SpamAssassin::Plugin::FreeMail(3), FreeMail(3)
- check message headers/body for freemail-domains
- Mail::SpamAssassin::RegistryBoundaries(3)
- domain delegation rules
- Mojo::IOLoop::Client(3)
- Non-blocking TCP/IP and UNIX domain socket client
- Mojo::IOLoop::Server(3)
- Non-blocking TCP and UNIX domain socket server
- Mozilla::PublicSuffix(3)
- Get a domain name's public suffix via the Mozilla Public Suffix List
- Net::DLookup(3)
- Perform domain lookups on 2-letter and 3-letter TLDs
- Net::DNS(3)
- Perl Interface to the Domain Name System
- Net::DNS::Check(3), Net::DNS::Check::Check(3)
- OOP Perl module based on Net::DNS for domain name checking
- Net::DNS::Check::NSQuery(3)
- Class to query authoritative nameservers for the domain name you want to check
- Net::DNS::Check::Test::ns_vs_delegated(3)
- Compare the NS RR found with the effectively delegated nameservers (NS RR in the parent zone of the domain name being checked)
- Net::DNS::Domain(3)
- DNS domains
- Net::DNS::DomainName(3)
- DNS name representation
- Net::DNS::Match(3)
- Perl extension for testing domains against another list of domains (similar to Net::Patricia but for FQDNs)
- Net::DRI(3)
- Interface to Domain Name Registries/Registrars/Resellers
- Net::DRI::Protocol::AFNIC::Email::Domain(3)
- AFNIC Email Domain commands for Net::DRI
- Net::DRI::Protocol::AFNIC::WS::Domain(3)
- AFNIC Web Services Domain commands for Net::DRI
- Net::DRI::Protocol::AdamsNames::WS::Domain(3)
- AdamsNames Web Services Domain commands for Net::DRI
- Net::DRI::Protocol::BookMyName::WS::Domain(3)
- BookMyName Web Services Domain commands for Net::DRI
- Net::DRI::Protocol::DAS(3)
- DAS Protocol (.BE & .EU Domain Availability Service) for Net::DRI
- Net::DRI::Protocol::DAS::AU(3)
- .AU DAS Protocol (Domain Availability Service) for Net::DRI
- Net::DRI::Protocol::DAS::AU::Domain(3)
- .AU DAS Domain commands for Net::DRI
- Net::DRI::Protocol::DAS::AdamsNames(3)
- AdamsNames DAS Protocol (Domain Availability Service) for Net::DRI
- Net::DRI::Protocol::DAS::AdamsNames::Domain(3)
- AdamsNames DAS Domain commands for Net::DRI
- Net::DRI::Protocol::DAS::Domain(3)
- DAS Domain commands for Net::DRI
- Net::DRI::Protocol::DAS::SIDN(3)
- .NL DAS Protocol (Domain Availability Service) for Net::DRI
- Net::DRI::Protocol::DAS::SIDN::Domain(3)
- .NL DAS Domain commands for Net::DRI
- Net::DRI::Protocol::EPP::Core::Domain(3)
- EPP Domain commands (RFC4931 obsoleting RFC3731) for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::AERO::Domain(3)
- .AERO EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::AFNIC::Domain(3)
- AFNIC (.FR/.RE) EPP Domain extensions for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::ARNES::Domain(3)
- ARNES (.SI) EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::AT::Domain(3)
- NIC.AT EPP Domain extension for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::AU::Domain(3)
- .AU EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::BR::Domain(3)
- .BR EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::CAT::Domain(3)
- .CAT EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::CIRA::Domain(3)
- CIRA (.CA) EPP Domain extensions for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::CZ::Domain(3)
- .CZ Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::DNSBE::Domain(3)
- DNSBE EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::EURid::Domain(3)
- EURid EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::FCCN::Domain(3)
- FCCN (.PT) EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::IT::Domain(3)
- .IT EPP Domain extension for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::LU::Domain(3)
- .LU EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::MOBI::Domain(3)
- .MOBI EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::NO::Domain(3)
- .NO EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::Nominet::Domain(3)
- .UK EPP Domain commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::PL::Domain(3)
- .PL EPP Domain extension commands for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::PRO::Domain(3)
- .PRO EPP domain extensions for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::SE::Extensions(3)
- .SE EPP Domain/Contact Extensions for Net::DRI
- Net::DRI::Protocol::EPP::Extensions::SIDN::Domain(3)
- SIDN (.NL) EPP Domain extensions for Net::DRI
- Net::DRI::Protocol::Gandi::WS::Domain(3)
- Gandi Web Services Domain commands for Net::DRI
- Net::DRI::Protocol::IRIS::DCHK::Domain(3)
- IRIS DCHK (RFC5144) Domain Commands for Net::DRI
- Net::DRI::Protocol::IRIS::DCHK::Status(3)
- IRIS DCHK Domain Status for Net::DRI
- Net::DRI::Protocol::OVH::WS::Domain(3)
- OVH Web Services Domain commands for Net::DRI
- Net::DRI::Protocol::OpenSRS::XCP::Domain(3)
- OpenSRS XCP Domain commands for Net::DRI
- Net::DRI::Protocol::RRI::Domain(3)
- RRI Domain commands (DENIC-11) for Net::DRI
- Net::DRI::Protocol::RRP::Core::Domain(3)
- RRP Domain commands for Net::DRI
- Net::DRI::Protocol::Whois::Domain::AERO(3)
- .AERO Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::AT(3)
- .AT Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::BIZ(3)
- .BIZ Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::CAT(3)
- .CAT Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::COM(3)
- .COM/.NET Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::EU(3)
- .EU Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::INFO(3)
- .INFO Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::LU(3)
- .LU Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::MOBI(3)
- .MOBI Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::NAME(3)
- .NAME Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::ORG(3)
- .ORG Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::PT(3)
- .PT Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::SE(3)
- .SE Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::TRAVEL(3)
- .TRAVEL Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::US(3)
- .US Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::WS(3)
- .WS Whois commands (RFC3912) for Net::DRI
- Net::DRI::Protocol::Whois::Domain::common(3)
- Whois commands (RFC3912) for Net::DRI
- Net::Domain(3)
- Attempt to evaluate the current host's internet name and domain
- Net::Domain::ExpireDate(3)
- -- obtain expiration date of domain names
- Net::Domain::TLD(3), Net::Domain::TLD(3)
- Work with TLD names
- Net::EPP::Frame::Command::Check::Domain(3)
- an instance of Net::EPP::Frame::Command::Check for domain names
- Net::EPP::Frame::Command::Create::Domain(3)
- an instance of Net::EPP::Frame::Command::Create for domain objects
- Net::EPP::Frame::Command::Delete::Domain(3)
- an instance of Net::EPP::Frame::Command::Delete for domain names
- Net::EPP::Frame::Command::Info::Domain(3)
- an instance of Net::EPP::Frame::Command::Info for domain names
- Net::EPP::Frame::Command::Renew::Domain(3)
- an instance of Net::EPP::Frame::Command::Renew for domain objects
- Net::EPP::Frame::Command::Transfer::Domain(3)
- an instance of Net::EPP::Frame::Command::Transfer for domain objects
- Net::EPP::Frame::Command::Update::Domain(3)
- an instance of Net::EPP::Frame::Command::Update for domain names
- Net::Google::DataAPI::Auth::ClientLogin::Multiple(3)
- keeps and sings auth_params for multiple Google Data API domains
- Net::IDN::Encode(3)
- Internationalizing Domain Names in Applications (IDNA)
- Net::IDN::Nameprep(3)
- A Stringprep Profile for Internationalized Domain Names (RFC 3491)
- Net::IDN::Overview(3), Net::IDN::Overwiew(3)
- Internationalized Domain Names for Applications (IDNA)
- Net::IDN::Standards(3)
- -- Internationalized Domain Names for Applications (IDNA)
- Net::LDAPI(3)
- use LDAP over a UNIX domain socket
- Net::UNIX(3)
- UNIX-domain sockets interface module
- Net::UNIX::Server(3)
- UNIX-domain sockets interface module for listeners
- Net::Whois(3)
- Get and parse "whois" domain data from InterNIC
- Net::Whois::Object::Domain(3)
- an object representation of a RPSL Domain block
- Net::Whois::Object::Domain::AFRINIC(3)
- an object representation of a RPSL Domain block
- Net::Whois::Object::Domain::APNIC(3)
- an object representation of a RPSL Domain block
- Net::Whois::Raw(3)
- Get Whois information of domains and IP addresses
- POE::Component::Client::Whois::TLDList(3)
- Determine the applicable Whois server for a given Top-level domain (TLD)
- Paws::Amplify::CreateDomainAssociation(3)
- Arguments for method CreateDomainAssociation on Paws::Amplify
- Paws::Amplify::DeleteDomainAssociation(3)
- Arguments for method DeleteDomainAssociation on Paws::Amplify
- Paws::Amplify::GetDomainAssociation(3)
- Arguments for method GetDomainAssociation on Paws::Amplify
- Paws::Amplify::ListDomainAssociations(3)
- Arguments for method ListDomainAssociations on Paws::Amplify
- Paws::Amplify::UpdateDomainAssociation(3)
- Arguments for method UpdateDomainAssociation on Paws::Amplify
- Paws::ApiGateway::CreateDomainName(3)
- Arguments for method CreateDomainName on Paws::ApiGateway
- Paws::ApiGateway::DeleteDomainName(3)
- Arguments for method DeleteDomainName on Paws::ApiGateway
- Paws::ApiGateway::GetDomainName(3)
- Arguments for method GetDomainName on Paws::ApiGateway
- Paws::ApiGateway::GetDomainNames(3)
- Arguments for method GetDomainNames on Paws::ApiGateway
- Paws::ApiGateway::UpdateDomainName(3)
- Arguments for method UpdateDomainName on Paws::ApiGateway
- Paws::ApiGatewayV2::CreateDomainName(3)
- Arguments for method CreateDomainName on Paws::ApiGatewayV2
- Paws::ApiGatewayV2::DeleteDomainName(3)
- Arguments for method DeleteDomainName on Paws::ApiGatewayV2
- Paws::ApiGatewayV2::GetDomainName(3)
- Arguments for method GetDomainName on Paws::ApiGatewayV2
- Paws::ApiGatewayV2::GetDomainNames(3)
- Arguments for method GetDomainNames on Paws::ApiGatewayV2
- Paws::ApiGatewayV2::UpdateDomainName(3)
- Arguments for method UpdateDomainName on Paws::ApiGatewayV2
- Paws::AppRunner::AssociateCustomDomain(3)
- Arguments for method AssociateCustomDomain on Paws::AppRunner
- Paws::AppRunner::DescribeCustomDomains(3)
- Arguments for method DescribeCustomDomains on Paws::AppRunner
- Paws::AppRunner::DisassociateCustomDomain(3)
- Arguments for method DisassociateCustomDomain on Paws::AppRunner
- Paws::CloudSearch::CreateDomain(3)
- Arguments for method CreateDomain on Paws::CloudSearch
- Paws::CloudSearch::DeleteDomain(3)
- Arguments for method DeleteDomain on Paws::CloudSearch
- Paws::CloudSearch::DescribeDomainEndpointOptions(3)
- Arguments for method DescribeDomainEndpointOptions on Paws::CloudSearch
- Paws::CloudSearch::DescribeDomains(3)
- Arguments for method DescribeDomains on Paws::CloudSearch
- Paws::CloudSearch::ListDomainNames(3)
- Arguments for method ListDomainNames on Paws::CloudSearch
- Paws::CloudSearch::UpdateDomainEndpointOptions(3)
- Arguments for method UpdateDomainEndpointOptions on Paws::CloudSearch
- Paws::CloudSearchDomain(3)
- Perl Interface to AWS Amazon CloudSearch Domain
- Paws::CloudSearchDomain::Search(3)
- Arguments for method Search on Paws::CloudSearchDomain
- Paws::CloudSearchDomain::Suggest(3)
- Arguments for method Suggest on Paws::CloudSearchDomain
- Paws::CloudSearchDomain::UploadDocuments(3)
- Arguments for method UploadDocuments on Paws::CloudSearchDomain
- Paws::CodeArtifact::CreateDomain(3)
- Arguments for method CreateDomain on Paws::CodeArtifact
- Paws::CodeArtifact::DeleteDomain(3)
- Arguments for method DeleteDomain on Paws::CodeArtifact
- Paws::CodeArtifact::DeleteDomainPermissionsPolicy(3)
- Arguments for method DeleteDomainPermissionsPolicy on Paws::CodeArtifact
- Paws::CodeArtifact::DescribeDomain(3)
- Arguments for method DescribeDomain on Paws::CodeArtifact
- Paws::CodeArtifact::GetDomainPermissionsPolicy(3)
- Arguments for method GetDomainPermissionsPolicy on Paws::CodeArtifact
- Paws::CodeArtifact::ListDomains(3)
- Arguments for method ListDomains on Paws::CodeArtifact
- Paws::CodeArtifact::ListRepositoriesInDomain(3)
- Arguments for method ListRepositoriesInDomain on Paws::CodeArtifact
- Paws::CodeArtifact::PutDomainPermissionsPolicy(3)
- Arguments for method PutDomainPermissionsPolicy on Paws::CodeArtifact
- Paws::CognitoIdp::CreateUserPoolDomain(3)
- Arguments for method CreateUserPoolDomain on Paws::CognitoIdp
- Paws::CognitoIdp::DeleteUserPoolDomain(3)
- Arguments for method DeleteUserPoolDomain on Paws::CognitoIdp
- Paws::CognitoIdp::DescribeUserPoolDomain(3)
- Arguments for method DescribeUserPoolDomain on Paws::CognitoIdp
- Paws::CognitoIdp::UpdateUserPoolDomain(3)
- Arguments for method UpdateUserPoolDomain on Paws::CognitoIdp
- Paws::CustomerProfiles::CreateDomain(3)
- Arguments for method CreateDomain on Paws::CustomerProfiles
- Paws::CustomerProfiles::DeleteDomain(3)
- Arguments for method DeleteDomain on Paws::CustomerProfiles
- Paws::CustomerProfiles::GetDomain(3)
- Arguments for method GetDomain on Paws::CustomerProfiles
- Paws::CustomerProfiles::ListDomains(3)
- Arguments for method ListDomains on Paws::CustomerProfiles
- Paws::CustomerProfiles::UpdateDomain(3)
- Arguments for method UpdateDomain on Paws::CustomerProfiles
- Paws::DS::DescribeDomainControllers(3)
- Arguments for method DescribeDomainControllers on Paws::DS
- Paws::DS::UpdateNumberOfDomainControllers(3)
- Arguments for method UpdateNumberOfDomainControllers on Paws::DS
- Paws::EC2::AcceptTransitGatewayMulticastDomainAssociations(3)
- Arguments for method AcceptTransitGatewayMulticastDomainAssociations on Paws::EC2
- Paws::EC2::AssociateTransitGatewayMulticastDomain(3)
- Arguments for method AssociateTransitGatewayMulticastDomain on Paws::EC2
- Paws::EC2::CreateTransitGatewayMulticastDomain(3)
- Arguments for method CreateTransitGatewayMulticastDomain on Paws::EC2
- Paws::EC2::DeleteTransitGatewayMulticastDomain(3)
- Arguments for method DeleteTransitGatewayMulticastDomain on Paws::EC2
- Paws::EC2::DescribeTransitGatewayMulticastDomains(3)
- Arguments for method DescribeTransitGatewayMulticastDomains on Paws::EC2
- Paws::EC2::DisassociateTransitGatewayMulticastDomain(3)
- Arguments for method DisassociateTransitGatewayMulticastDomain on Paws::EC2
- Paws::EC2::GetTransitGatewayMulticastDomainAssociations(3)
- Arguments for method GetTransitGatewayMulticastDomainAssociations on Paws::EC2
- Paws::EC2::RejectTransitGatewayMulticastDomainAssociations(3)
- Arguments for method RejectTransitGatewayMulticastDomainAssociations on Paws::EC2
- Paws::ES::CreateElasticsearchDomain(3)
- Arguments for method CreateElasticsearchDomain on Paws::ES
- Paws::ES::DeleteElasticsearchDomain(3)
- Arguments for method DeleteElasticsearchDomain on Paws::ES
- Paws::ES::DescribeDomainAutoTunes(3)
- Arguments for method DescribeDomainAutoTunes on Paws::ES
- Paws::ES::DescribeElasticsearchDomain(3)
- Arguments for method DescribeElasticsearchDomain on Paws::ES
- Paws::ES::DescribeElasticsearchDomainConfig(3)
- Arguments for method DescribeElasticsearchDomainConfig on Paws::ES
- Paws::ES::DescribeElasticsearchDomains(3)
- Arguments for method DescribeElasticsearchDomains on Paws::ES
- Paws::ES::ListDomainNames(3)
- Arguments for method ListDomainNames on Paws::ES
- Paws::ES::ListDomainsForPackage(3)
- Arguments for method ListDomainsForPackage on Paws::ES
- Paws::ES::ListPackagesForDomain(3)
- Arguments for method ListPackagesForDomain on Paws::ES
- Paws::ES::UpdateElasticsearchDomainConfig(3)
- Arguments for method UpdateElasticsearchDomainConfig on Paws::ES
- Paws::ES::UpgradeElasticsearchDomain(3)
- Arguments for method UpgradeElasticsearchDomain on Paws::ES
- Paws::IoT::CreateDomainConfiguration(3)
- Arguments for method CreateDomainConfiguration on Paws::IoT
- Paws::IoT::DeleteDomainConfiguration(3)
- Arguments for method DeleteDomainConfiguration on Paws::IoT
- Paws::IoT::DescribeDomainConfiguration(3)
- Arguments for method DescribeDomainConfiguration on Paws::IoT
- Paws::IoT::ListDomainConfigurations(3)
- Arguments for method ListDomainConfigurations on Paws::IoT
- Paws::IoT::UpdateDomainConfiguration(3)
- Arguments for method UpdateDomainConfiguration on Paws::IoT
- Paws::Lightsail::CreateDomain(3)
- Arguments for method CreateDomain on Paws::Lightsail
- Paws::Lightsail::CreateDomainEntry(3)
- Arguments for method CreateDomainEntry on Paws::Lightsail
- Paws::Lightsail::DeleteDomain(3)
- Arguments for method DeleteDomain on Paws::Lightsail
- Paws::Lightsail::DeleteDomainEntry(3)
- Arguments for method DeleteDomainEntry on Paws::Lightsail
- Paws::Lightsail::GetDomain(3)
- Arguments for method GetDomain on Paws::Lightsail
- Paws::Lightsail::GetDomains(3)
- Arguments for method GetDomains on Paws::Lightsail
- Paws::Lightsail::UpdateDomainEntry(3)
- Arguments for method UpdateDomainEntry on Paws::Lightsail
- Paws::PinpointEmail::GetDomainDeliverabilityCampaign(3)
- Arguments for method GetDomainDeliverabilityCampaign on Paws::PinpointEmail
- Paws::PinpointEmail::GetDomainStatisticsReport(3)
- Arguments for method GetDomainStatisticsReport on Paws::PinpointEmail
- Paws::PinpointEmail::ListDomainDeliverabilityCampaigns(3)
- Arguments for method ListDomainDeliverabilityCampaigns on Paws::PinpointEmail
- Paws::Route53Domains(3)
- Perl Interface to AWS Amazon Route 53 Domains
- Paws::Route53Domains::AcceptDomainTransferFromAnotherAwsAccount(3)
- Arguments for method AcceptDomainTransferFromAnotherAwsAccount on Paws::Route53Domains
- Paws::Route53Domains::CancelDomainTransferToAnotherAwsAccount(3)
- Arguments for method CancelDomainTransferToAnotherAwsAccount on Paws::Route53Domains
- Paws::Route53Domains::CheckDomainAvailability(3)
- Arguments for method CheckDomainAvailability on Paws::Route53Domains
- Paws::Route53Domains::CheckDomainTransferability(3)
- Arguments for method CheckDomainTransferability on Paws::Route53Domains
- Paws::Route53Domains::DeleteTagsForDomain(3)
- Arguments for method DeleteTagsForDomain on Paws::Route53Domains
- Paws::Route53Domains::DisableDomainAutoRenew(3)
- Arguments for method DisableDomainAutoRenew on Paws::Route53Domains
- Paws::Route53Domains::DisableDomainTransferLock(3)
- Arguments for method DisableDomainTransferLock on Paws::Route53Domains
- Paws::Route53Domains::EnableDomainAutoRenew(3)
- Arguments for method EnableDomainAutoRenew on Paws::Route53Domains
- Paws::Route53Domains::EnableDomainTransferLock(3)
- Arguments for method EnableDomainTransferLock on Paws::Route53Domains
- Paws::Route53Domains::GetContactReachabilityStatus(3)
- Arguments for method GetContactReachabilityStatus on Paws::Route53Domains
- Paws::Route53Domains::GetDomainDetail(3)
- Arguments for method GetDomainDetail on Paws::Route53Domains
- Paws::Route53Domains::GetDomainSuggestions(3)
- Arguments for method GetDomainSuggestions on Paws::Route53Domains
- Paws::Route53Domains::GetOperationDetail(3)
- Arguments for method GetOperationDetail on Paws::Route53Domains
- Paws::Route53Domains::ListDomains(3)
- Arguments for method ListDomains on Paws::Route53Domains
- Paws::Route53Domains::ListOperations(3)
- Arguments for method ListOperations on Paws::Route53Domains
- Paws::Route53Domains::ListTagsForDomain(3)
- Arguments for method ListTagsForDomain on Paws::Route53Domains
- Paws::Route53Domains::RegisterDomain(3)
- Arguments for method RegisterDomain on Paws::Route53Domains
- Paws::Route53Domains::RejectDomainTransferFromAnotherAwsAccount(3)
- Arguments for method RejectDomainTransferFromAnotherAwsAccount on Paws::Route53Domains
- Paws::Route53Domains::RenewDomain(3)
- Arguments for method RenewDomain on Paws::Route53Domains
- Paws::Route53Domains::ResendContactReachabilityEmail(3)
- Arguments for method ResendContactReachabilityEmail on Paws::Route53Domains
- Paws::Route53Domains::RetrieveDomainAuthCode(3)
- Arguments for method RetrieveDomainAuthCode on Paws::Route53Domains
- Paws::Route53Domains::TransferDomain(3)
- Arguments for method TransferDomain on Paws::Route53Domains
- Paws::Route53Domains::TransferDomainToAnotherAwsAccount(3)
- Arguments for method TransferDomainToAnotherAwsAccount on Paws::Route53Domains
- Paws::Route53Domains::UpdateDomainContact(3)
- Arguments for method UpdateDomainContact on Paws::Route53Domains
- Paws::Route53Domains::UpdateDomainContactPrivacy(3)
- Arguments for method UpdateDomainContactPrivacy on Paws::Route53Domains
- Paws::Route53Domains::UpdateDomainNameservers(3)
- Arguments for method UpdateDomainNameservers on Paws::Route53Domains
- Paws::Route53Domains::UpdateTagsForDomain(3)
- Arguments for method UpdateTagsForDomain on Paws::Route53Domains
- Paws::Route53Domains::ViewBilling(3)
- Arguments for method ViewBilling on Paws::Route53Domains
- Paws::Route53Resolver::CreateFirewallDomainList(3)
- Arguments for method CreateFirewallDomainList on Paws::Route53Resolver
- Paws::Route53Resolver::DeleteFirewallDomainList(3)
- Arguments for method DeleteFirewallDomainList on Paws::Route53Resolver
- Paws::Route53Resolver::GetFirewallDomainList(3)
- Arguments for method GetFirewallDomainList on Paws::Route53Resolver
- Paws::Route53Resolver::ImportFirewallDomains(3)
- Arguments for method ImportFirewallDomains on Paws::Route53Resolver
- Paws::Route53Resolver::ListFirewallDomainLists(3)
- Arguments for method ListFirewallDomainLists on Paws::Route53Resolver
- Paws::Route53Resolver::ListFirewallDomains(3)
- Arguments for method ListFirewallDomains on Paws::Route53Resolver
- Paws::Route53Resolver::UpdateFirewallDomains(3)
- Arguments for method UpdateFirewallDomains on Paws::Route53Resolver
- Paws::SDB::CreateDomain(3)
- Arguments for method CreateDomain on Paws::SDB
- Paws::SDB::DeleteDomain(3)
- Arguments for method DeleteDomain on Paws::SDB
- Paws::SDB::DomainMetadata(3)
- Arguments for method DomainMetadata on Paws::SDB
- Paws::SDB::ListDomains(3)
- Arguments for method ListDomains on Paws::SDB
- Paws::SES::GetIdentityMailFromDomainAttributes(3)
- Arguments for method GetIdentityMailFromDomainAttributes on Paws::SES
- Paws::SES::SetIdentityMailFromDomain(3)
- Arguments for method SetIdentityMailFromDomain on Paws::SES
- Paws::SES::VerifyDomainDkim(3)
- Arguments for method VerifyDomainDkim on Paws::SES
- Paws::SES::VerifyDomainIdentity(3)
- Arguments for method VerifyDomainIdentity on Paws::SES
- Paws::SESv2::GetDomainDeliverabilityCampaign(3)
- Arguments for method GetDomainDeliverabilityCampaign on Paws::SESv2
- Paws::SESv2::GetDomainStatisticsReport(3)
- Arguments for method GetDomainStatisticsReport on Paws::SESv2
- Paws::SESv2::ListDomainDeliverabilityCampaigns(3)
- Arguments for method ListDomainDeliverabilityCampaigns on Paws::SESv2
- Paws::SageMaker::CreateDomain(3)
- Arguments for method CreateDomain on Paws::SageMaker
- Paws::SageMaker::CreatePresignedDomainUrl(3)
- Arguments for method CreatePresignedDomainUrl on Paws::SageMaker
- Paws::SageMaker::DeleteDomain(3)
- Arguments for method DeleteDomain on Paws::SageMaker
- Paws::SageMaker::DescribeDomain(3)
- Arguments for method DescribeDomain on Paws::SageMaker
- Paws::SageMaker::ListDomains(3)
- Arguments for method ListDomains on Paws::SageMaker
- Paws::SageMaker::UpdateDomain(3)
- Arguments for method UpdateDomain on Paws::SageMaker
- Paws::SimpleWorkflow::DeprecateDomain(3)
- Arguments for method DeprecateDomain on Paws::SimpleWorkflow
- Paws::SimpleWorkflow::DescribeDomain(3)
- Arguments for method DescribeDomain on Paws::SimpleWorkflow
- Paws::SimpleWorkflow::ListDomains(3)
- Arguments for method ListDomains on Paws::SimpleWorkflow
- Paws::SimpleWorkflow::RegisterDomain(3)
- Arguments for method RegisterDomain on Paws::SimpleWorkflow
- Paws::SimpleWorkflow::UndeprecateDomain(3)
- Arguments for method UndeprecateDomain on Paws::SimpleWorkflow
- Paws::StorageGateway::JoinDomain(3)
- Arguments for method JoinDomain on Paws::StorageGateway
- Paws::WorkLink::AssociateDomain(3)
- Arguments for method AssociateDomain on Paws::WorkLink
- Paws::WorkLink::DescribeDomain(3)
- Arguments for method DescribeDomain on Paws::WorkLink
- Paws::WorkLink::DisassociateDomain(3)
- Arguments for method DisassociateDomain on Paws::WorkLink
- Paws::WorkLink::ListDomains(3)
- Arguments for method ListDomains on Paws::WorkLink
- Paws::WorkLink::RestoreDomainAccess(3)
- Arguments for method RestoreDomainAccess on Paws::WorkLink
- Paws::WorkLink::RevokeDomainAccess(3)
- Arguments for method RevokeDomainAccess on Paws::WorkLink
- Paws::WorkLink::UpdateDomainMetadata(3)
- Arguments for method UpdateDomainMetadata on Paws::WorkLink
- Perl::Critic::Policy::Miscellanea::TextDomainPlaceholders(3)
- check placeholder names in Locale::TextDomain calls
- Perl::Critic::Policy::Miscellanea::TextDomainUnused(3)
- check for Locale::TextDomain imported but unused
- Plagger::Plugin::Filter::GuessTimeZoneByDomain(3)
- Guess timezone by domains if datetime is floating or UTC
- Security::TLSCheck::App::DomainFilter(3)
- -- change wrong domain names into correct ones, if possible
- Security::TLSCheck::Checks::CipherStrengthOnlyValidCerts(3)
- Check Strength of CipherSuites and SSL/TLS Version, but only for domains with valid certficates
- Software::License::CC0_1_0(3)
- the "public domain"-like CC0 license, version 1.0
- Software::License::CC_PDM_1_0(3)
- Creative Commons Public Domain Mark 1.0
- Sys::Virt::Domain(3)
- Represent & manage a libvirt guest domain
- Sys::Virt::DomainSnapshot(3)
- Represent & manage a libvirt guest domain
- Test::UNIXSock(3)
- testing UNIX domain socket program
- Toadfarm::Manual::DSL(3)
- Domain specific language for Toadfarm
- URBL::Prepare(3), URPL::Prepare(3)
- -- prepare hostname for URBL domain lookup
- VUser::Google::ProvisioningAPI(3)
- Perl module that implements the Google Apps for Your Domain Provisioning API
- VUser::Google::ProvisioningAPI::V1_0(3)
- Perl module that implements version 1.0 of the Google Apps for Your Domain Provisioning API
- VUser::Google::ProvisioningAPI::V2_0(3)
- Perl module that implements version 2.0 of the Google Apps for Your Domain Provisioning API
- WWW::Yandex::TIC(3)
- Query Yandex Thematic Index of Citing (TIC) for domain
- X11::Protocol::Connection::UNIXFH(3)
- Perl module for FileHandle-based Unix-domain X11 connections
- certbot(1)
- certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account show_account Display account details --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications options: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA. When used in combination with the (ga-v(ga option, the challenge URLs or FQDNs and their expected return values are shown. (default: False) --preferred-chain PREFERRED_CHAIN Set the preferred certificate chain. If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --issuance-timeout ISSUANCE_TIMEOUT This option specifies how long (in seconds) Certbot will wait for the server to issue a certificate. (default: 90) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/2.0.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --no-reuse-key When renewing, do not use the same private key as the existing certificate. Not reusing private keys is the default behavior of Certbot. This option may be used to unset --reuse-key on an existing certificate. (default: False) --new-key When renewing or replacing a certificate, generate a new private key, even if --reuse-key is set on the existing certificate. Combining --new-key and --reuse- key will result in the private key being replaced and then reused in future renewals. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key. Only *ONE* per invocation can be provided at this time. (default: ecdsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must-Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. The root certificates trusted by Certbot can be overriden by setting the REQUESTS_CA_BUNDLE environment variable. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew any certificates previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the plugins and options used to obtain or most recently renew each certificate. You can test whether future renewals will succeed with (ga--dry-run(ga. Individual certificates can be renewed with the (ga--cert-name(ga option. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com") (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: False) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. show_account: Options useful for the "show_account" subcommand: plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
- dmarc_lookup(1)
- look up DMARC policy for a domain
- dnscheck-12hourmailer(1)
- email registrars about problems in their domains
- dnscheck-preflight(1)
- quickly check if a name seems to be a delegated domain or not
- inc::Module::Install::DSL(3)
- Domain Specific Language for Module::Install
- mdnsctl(8)
- control the Multicast Domain Server daemon
- moglistkeys(1)
- -- Lists keys out of a MogileFS domain
- oksh(1), rksh(1)
- public domain Korn shell
- pwhois(1)
- Get Whois information of domains and IP addresses
- sendfd(3), recvfd(3)
- pass file descriptors along Unix domain sockets
- spfquery.pl(1), spfquery(1) - (Mail::SPF)
- Checks if a given set of e-mail parameters matches a domain's SPF policy
