Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
PCI_IOV_INIT(9)
enable SR-IOV on a PF device
acct(2)
enable or disable process accounting
accton(8)
enable/disable system accounting
config_intrhook(9)
schedule a function to be run after interrupts have been enabled, but before root is mounted
devctl(3), devctl_attach(3), devctl_clear_driver(3), devctl_delete(3), devctl_detach(3), devctl_disable(3), devctl_enable(3), devctl_freeze(3), devctl_getpath(3), devctl_rescan(3), devctl_reset(3), devctl_resume(3), devctl_set_driver(3), devctl_suspend(3), devctl_thaw(3)
device control library
device_enable(9), device_disable(9), device_is_enabled(9)
manipulate device enabled flag
feclearexcept(3), fegetexceptflag(3), feraiseexcept(3), fesetexceptflag(3), fetestexcept(3), fegetround(3), fesetround(3), fegetenv(3), feholdexcept(3), fesetenv(3), feupdateenv(3), feenableexcept(3), fedisableexcept(3), fegetexcept(3)
floating-point environment control
feenableexcept(3), fedisableexcept(3), fegetexcept(3)
floating-point exception masking
keyok(3), %keyok(3)
enable or disable a curses keycode
ktrace(1)
enable kernel process tracing
openpam_set_feature(3)
enable or disable an optional feature
pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_clear_pme(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_enable_pme(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_has_pm(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9)
PCI bus interface
pmc_disable(3), pmc_enable(3)
administrative control of hardware performance counters
pwmbus(9), PWMBUS_CHANNEL_CONFIG(9), PWMBUS_CHANNEL_COUNT(9), PWMBUS_CHANNEL_ENABLE(9), PWMBUS_CHANNEL_GET_CONFIG(9), PWMBUS_CHANNEL_GET_FLAGS(9), PWMBUS_CHANNEL_IS_ENABLED(9), PWMBUS_CHANNEL_SET_FLAGS(9), PWMBUS_GET_BUS(9)
PWMBUS methods
regulator(9), regulator_get_by_name(9), regulator_get_by_id(9), regulator_release(9), regulator_get_name(9), regulator_enable(9), regulator_disable(9), regulator_stop(9), regulator_status(9), regulator_get_voltage(9), regulator_set_voltage(9), regulator_check_voltage(9), regulator_get_by_ofw_property(9)
regulator methods
superio(9), superio_devid(9), superio_dev_disable(9), superio_dev_enable(9), superio_dev_enabled(9), superio_find_dev(9), superio_get_dma(9), superio_get_iobase(9), superio_get_irq(9), superio_get_ldn(9), superio_get_type(9), superio_read(9), superio_revid(9), superio_vendor(9), superio_write(9)
Super I/O bus interface
svc_dg_enablecache(3), svc_exit(3), svc_fdset(3), svc_freeargs(3), svc_getargs(3), svc_getreq_common(3), svc_getreq_poll(3), svc_getreqset(3), svc_getrpccaller(3), svc_pollset(3), svc_run(3), svc_sendreply(3)
library routines for RPC servers
BIO_sendmmsg(3), BIO_recvmmsg(3), BIO_dgram_set_local_addr_enable(3), BIO_dgram_get_local_addr_enable(3), BIO_dgram_get_local_addr_cap(3), BIO_err_is_non_fatal(3)
send and receive multiple datagrams in a single call
EVP_RAND(3), EVP_RAND_fetch(3), EVP_RAND_free(3), EVP_RAND_up_ref(3), EVP_RAND_CTX(3), EVP_RAND_CTX_new(3), EVP_RAND_CTX_free(3), EVP_RAND_CTX_up_ref(3), EVP_RAND_instantiate(3), EVP_RAND_uninstantiate(3), EVP_RAND_generate(3), EVP_RAND_reseed(3), EVP_RAND_nonce(3), EVP_RAND_enable_locking(3), EVP_RAND_verify_zeroization(3), EVP_RAND_get_strength(3), EVP_RAND_get_state(3), EVP_RAND_get0_provider(3), EVP_RAND_CTX_get0_rand(3), EVP_RAND_is_a(3), EVP_RAND_get0_name(3), EVP_RAND_names_do_all(3), EVP_RAND_get0_description(3), EVP_RAND_CTX_get_params(3), EVP_RAND_CTX_set_params(3), EVP_RAND_do_all_provided(3), EVP_RAND_get_params(3), EVP_RAND_gettable_ctx_params(3), EVP_RAND_settable_ctx_params(3), EVP_RAND_CTX_gettable_params(3), EVP_RAND_CTX_settable_params(3), EVP_RAND_gettable_params(3), EVP_RAND_STATE_UNINITIALISED(3), EVP_RAND_STATE_READY(3), EVP_RAND_STATE_ERROR(3)
EVP RAND routines
EVP_set_default_properties(3), EVP_default_properties_enable_fips(3), EVP_default_properties_is_fips_enabled(3), EVP_get1_default_properties(3)
manage default properties for future algorithm fetches
OSSL_FUNC_SSL_QUIC_TLS_crypto_send_fn(3), OSSL_FUNC_SSL_QUIC_TLS_crypto_recv_rcd_fn(3), OSSL_FUNC_SSL_QUIC_TLS_crypto_release_rcd_fn(3), OSSL_FUNC_SSL_QUIC_TLS_yield_secret_fn(3), OSSL_FUNC_SSL_QUIC_TLS_got_transport_params_fn(3), OSSL_FUNC_SSL_QUIC_TLS_alert_fn(3), SSL_set_quic_tls_cbs(3), SSL_set_quic_tls_transport_params(3), SSL_set_quic_tls_early_data_enabled(3)
Use the OpenSSL TLS implementation for a third party QUIC implementation
OSSL_QUIC_client_method(3), OSSL_QUIC_client_thread_method(3), OSSL_QUIC_server_method(3)
Provide SSL_METHOD objects for QUIC enabled functions
OSSL_trace_enabled(3), OSSL_trace_begin(3), OSSL_trace_end(3), OSSL_TRACE_BEGIN(3), OSSL_TRACE_END(3), OSSL_TRACE_CANCEL(3), OSSL_TRACE(3), OSSL_TRACE1(3), OSSL_TRACE2(3), OSSL_TRACE3(3), OSSL_TRACE4(3), OSSL_TRACE5(3), OSSL_TRACE6(3), OSSL_TRACE7(3), OSSL_TRACE8(3), OSSL_TRACE9(3), OSSL_TRACEV(3), OSSL_TRACE_STRING(3), OSSL_TRACE_STRING_MAX(3), OSSL_trace_string(3), OSSL_TRACE_ENABLED(3)
OpenSSL Tracing API
SSL_CTX_dane_enable(3), SSL_CTX_dane_mtype_set(3), SSL_dane_enable(3), SSL_dane_tlsa_add(3), SSL_get0_dane_authority(3), SSL_get0_dane_tlsa(3), SSL_CTX_dane_set_flags(3), SSL_CTX_dane_clear_flags(3), SSL_dane_set_flags(3), SSL_dane_clear_flags(3)
enable DANE TLS authentication of the remote TLS server in the local TLS client
SSL_CTX_set_session_cache_mode(3), SSL_CTX_get_session_cache_mode(3)
enable/disable session caching
TLSv1_2_method(3), TLSv1_2_server_method(3), TLSv1_2_client_method(3), SSL_CTX_new(3), SSL_CTX_new_ex(3), SSL_CTX_up_ref(3), SSLv3_method(3), SSLv3_server_method(3), SSLv3_client_method(3), TLSv1_method(3), TLSv1_server_method(3), TLSv1_client_method(3), TLSv1_1_method(3), TLSv1_1_server_method(3), TLSv1_1_client_method(3), TLS_method(3), TLS_server_method(3), TLS_client_method(3), SSLv23_method(3), SSLv23_server_method(3), SSLv23_client_method(3), DTLS_method(3), DTLS_server_method(3), DTLS_client_method(3), DTLSv1_method(3), DTLSv1_server_method(3), DTLSv1_client_method(3), DTLSv1_2_method(3), DTLSv1_2_server_method(3), DTLSv1_2_client_method(3)
create a new SSL_CTX object as framework for TLS/SSL or DTLS enabled functions
ssl_ct_validation_cb(3), SSL_enable_ct(3), SSL_CTX_enable_ct(3), SSL_disable_ct(3), SSL_CTX_disable_ct(3), SSL_set_ct_validation_callback(3), SSL_CTX_set_ct_validation_callback(3), SSL_ct_is_enabled(3), SSL_CTX_ct_is_enabled(3)
control Certificate Transparency policy
"glEnable(3), glDisable(3)
enable or disable server-side GL capabilities
"glEnableClientState(3), glDisableClientState(3)
enable or disable client-side capability
"glEvalCoord1d(3), glEvalCoord1f(3), glEvalCoord2d(3), glEvalCoord2f(3), glEvalCoord1dv(3), glEvalCoord1fv(3), glEvalCoord2dv(3), glEvalCoord2fv(3)
evaluate enabled one- and two-dimensional maps delim $$
Ast_iterator(3o)
Ast_iterator.iterator enables AST inspection using open recursion
BIO_sendmmsg(3ossl), BIO_recvmmsg(3ossl), BIO_dgram_set_local_addr_enable(3ossl), BIO_dgram_get_local_addr_enable(3ossl), BIO_dgram_get_local_addr_cap(3ossl), BIO_err_is_non_fatal(3ossl)
send and receive multiple datagrams in a single call
BN_set_flags(3), BN_get_flags(3)
enable and inspect flags on BIGNUM objects
CDKchdir(3), CDKchdir CDKgetDirectoryContents CDKopenFile CDKreadFile alignxy char2Chtype char2DisplayType checkForLink chtype2String deleteCursesWindow enableCursesMarkup eraseCursesWindow getListIndex getString justifyString mode2Filetype moveCursesWindow popupDialog popupLabel popupLabelAttrib selectFile setWidgetDimension stripWhiteSpace viewFile viewInfo cdk_util(3)
Cdk utility functions
CURLMOPT_PIPELINING(3)
enable HTTP multiplexing
CURLOPT_NETRC(3)
enable use of .netrc
CURLOPT_SSH_COMPRESSION(3)
enable SSH compression
CURLOPT_SSL_ENABLE_ALPN(3)
Application Layer Protocol Negotiation
CURLOPT_SSL_ENABLE_NPN(3)
use NPN
DPMSEnable(3)
enables DPMS on the specified display
EVP_RAND(3ossl), EVP_RAND_fetch(3ossl), EVP_RAND_free(3ossl), EVP_RAND_up_ref(3ossl), EVP_RAND_CTX(3ossl), EVP_RAND_CTX_new(3ossl), EVP_RAND_CTX_free(3ossl), EVP_RAND_CTX_up_ref(3ossl), EVP_RAND_instantiate(3ossl), EVP_RAND_uninstantiate(3ossl), EVP_RAND_generate(3ossl), EVP_RAND_reseed(3ossl), EVP_RAND_nonce(3ossl), EVP_RAND_enable_locking(3ossl), EVP_RAND_verify_zeroization(3ossl), EVP_RAND_get_strength(3ossl), EVP_RAND_get_state(3ossl), EVP_RAND_get0_provider(3ossl), EVP_RAND_CTX_get0_rand(3ossl), EVP_RAND_is_a(3ossl), EVP_RAND_get0_name(3ossl), EVP_RAND_names_do_all(3ossl), EVP_RAND_get0_description(3ossl), EVP_RAND_CTX_get_params(3ossl), EVP_RAND_CTX_set_params(3ossl), EVP_RAND_do_all_provided(3ossl), EVP_RAND_get_params(3ossl), EVP_RAND_gettable_ctx_params(3ossl), EVP_RAND_settable_ctx_params(3ossl), EVP_RAND_CTX_gettable_params(3ossl), EVP_RAND_CTX_settable_params(3ossl), EVP_RAND_gettable_params(3ossl), EVP_RAND_STATE_UNINITIALISED(3ossl), EVP_RAND_STATE_READY(3ossl), EVP_RAND_STATE_ERROR(3ossl)
EVP RAND routines
EVP_set_default_properties(3ossl), EVP_default_properties_enable_fips(3ossl), EVP_default_properties_is_fips_enabled(3ossl), EVP_get1_default_properties(3ossl)
manage default properties for future algorithm fetches
FcConfigEnableHome(3)
controls use of the home directory
OSSL_FUNC_SSL_QUIC_TLS_crypto_send_fn(3ossl), OSSL_FUNC_SSL_QUIC_TLS_crypto_recv_rcd_fn(3ossl), OSSL_FUNC_SSL_QUIC_TLS_crypto_release_rcd_fn(3ossl), OSSL_FUNC_SSL_QUIC_TLS_yield_secret_fn(3ossl), OSSL_FUNC_SSL_QUIC_TLS_got_transport_params_fn(3ossl), OSSL_FUNC_SSL_QUIC_TLS_alert_fn(3ossl), SSL_set_quic_tls_cbs(3ossl), SSL_set_quic_tls_transport_params(3ossl), SSL_set_quic_tls_early_data_enabled(3ossl)
Use the OpenSSL TLS implementation for a third party QUIC implementation
OSSL_QUIC_client_method(3ossl), OSSL_QUIC_client_thread_method(3ossl), OSSL_QUIC_server_method(3ossl)
Provide SSL_METHOD objects for QUIC enabled functions
OSSL_trace_enabled(3ossl), OSSL_trace_begin(3ossl), OSSL_trace_end(3ossl), OSSL_TRACE_BEGIN(3ossl), OSSL_TRACE_END(3ossl), OSSL_TRACE_CANCEL(3ossl), OSSL_TRACE(3ossl), OSSL_TRACE1(3ossl), OSSL_TRACE2(3ossl), OSSL_TRACE3(3ossl), OSSL_TRACE4(3ossl), OSSL_TRACE5(3ossl), OSSL_TRACE6(3ossl), OSSL_TRACE7(3ossl), OSSL_TRACE8(3ossl), OSSL_TRACE9(3ossl), OSSL_TRACEV(3ossl), OSSL_TRACE_STRING(3ossl), OSSL_TRACE_STRING_MAX(3ossl), OSSL_trace_string(3ossl), OSSL_TRACE_ENABLED(3ossl)
OpenSSL Tracing API
SDL_EnableKeyRepeat(3)
Set keyboard repeat rate
SDL_EnableUNICODE(3)
Enable UNICODE translation
SDL_JoystickEventState(3)
Enable/disable joystick event polling
SSL_CTX_dane_enable(3), SSL_CTX_dane_mtype_set(3), SSL_dane_enable(3), SSL_dane_tlsa_add(3), SSL_get0_dane_authority(3), SSL_get0_dane_tlsa(3), SSL_CTX_dane_set_flags(3), SSL_CTX_dane_clear_flags(3), SSL_dane_set_flags(3), SSL_dane_clear_flags(3)
enable DANE TLS authentication of the remote TLS server in the local TLS client
SSL_CTX_dane_enable(3ossl), SSL_CTX_dane_mtype_set(3ossl), SSL_dane_enable(3ossl), SSL_dane_tlsa_add(3ossl), SSL_get0_dane_authority(3ossl), SSL_get0_dane_tlsa(3ossl), SSL_CTX_dane_set_flags(3ossl), SSL_CTX_dane_clear_flags(3ossl), SSL_dane_set_flags(3ossl), SSL_dane_clear_flags(3ossl)
enable DANE TLS authentication of the remote TLS server in the local TLS client
SSL_CTX_set_session_cache_mode(3), SSL_CTX_get_session_cache_mode(3)
enable/disable session caching
SSL_CTX_set_session_cache_mode(3ossl), SSL_CTX_get_session_cache_mode(3ossl)
enable/disable session caching
SSL_QUIC_METHOD(3ossl), OSSL_ENCRYPTION_LEVEL(3ossl), SSL_CTX_set_quic_method(3ossl), SSL_set_quic_method(3ossl), SSL_set_quic_transport_params(3ossl), SSL_get_peer_quic_transport_params(3ossl), SSL_quic_max_handshake_flight_len(3ossl), SSL_quic_read_level(3ossl), SSL_quic_write_level(3ossl), SSL_provide_quic_data(3ossl), SSL_process_quic_post_handshake(3ossl), SSL_is_quic(3ossl), SSL_get_peer_quic_transport_version(3ossl), SSL_get_quic_transport_version(3ossl), SSL_set_quic_transport_version(3ossl), SSL_set_quic_use_legacy_codepoint(3ossl), SSL_set_quic_early_data_enabled(3ossl)
QUIC support
TCL_MEM_DEBUG.tcl86(3), TCL_MEM_DEBUG(3)
Compile-time flag to enable Tcl memory debugging
TCL_MEM_DEBUG.tcl90(3), TCL_MEM_DEBUG(3)
Compile-time flag to enable Tcl memory debugging
TLSv1_2_method(3), TLSv1_2_server_method(3), TLSv1_2_client_method(3), SSL_CTX_new(3), SSL_CTX_up_ref(3), SSLv3_method(3), SSLv3_server_method(3), SSLv3_client_method(3), TLSv1_method(3), TLSv1_server_method(3), TLSv1_client_method(3), TLSv1_1_method(3), TLSv1_1_server_method(3), TLSv1_1_client_method(3), TLS_method(3), TLS_server_method(3), TLS_client_method(3), SSLv23_method(3), SSLv23_server_method(3), SSLv23_client_method(3), DTLS_method(3), DTLS_server_method(3), DTLS_client_method(3), DTLSv1_method(3), DTLSv1_server_method(3), DTLSv1_client_method(3), DTLSv1_2_method(3), DTLSv1_2_server_method(3), DTLSv1_2_client_method(3)
create a new SSL_CTX object as framework for TLS/SSL or DTLS enabled functions
TLSv1_2_method(3ossl), TLSv1_2_server_method(3ossl), TLSv1_2_client_method(3ossl), SSL_CTX_new(3ossl), SSL_CTX_new_ex(3ossl), SSL_CTX_up_ref(3ossl), SSLv3_method(3ossl), SSLv3_server_method(3ossl), SSLv3_client_method(3ossl), TLSv1_method(3ossl), TLSv1_server_method(3ossl), TLSv1_client_method(3ossl), TLSv1_1_method(3ossl), TLSv1_1_server_method(3ossl), TLSv1_1_client_method(3ossl), TLS_method(3ossl), TLS_server_method(3ossl), TLS_client_method(3ossl), SSLv23_method(3ossl), SSLv23_server_method(3ossl), SSLv23_client_method(3ossl), DTLS_method(3ossl), DTLS_server_method(3ossl), DTLS_client_method(3ossl), DTLSv1_method(3ossl), DTLSv1_server_method(3ossl), DTLSv1_client_method(3ossl), DTLSv1_2_method(3ossl), DTLSv1_2_server_method(3ossl), DTLSv1_2_client_method(3ossl)
create a new SSL_CTX object as framework for TLS/SSL or DTLS enabled functions
Tcl_LimitAddHandler.tcl86(3), Tcl_LimitAddHandler(3), Tcl_LimitCheck(3), Tcl_LimitExceeded(3), Tcl_LimitGetCommands(3), Tcl_LimitGetGranularity(3), Tcl_LimitGetTime(3), Tcl_LimitReady(3), Tcl_LimitRemoveHandler(3), Tcl_LimitSetCommands(3), Tcl_LimitSetGranularity(3), Tcl_LimitSetTime(3), Tcl_LimitTypeEnabled(3), Tcl_LimitTypeExceeded(3), Tcl_LimitTypeReset(3), Tcl_LimitTypeSet(3)
manage and check resource limits on interpreters
Tcl_LimitAddHandler.tcl90(3), Tcl_LimitAddHandler(3), Tcl_LimitCheck(3), Tcl_LimitExceeded(3), Tcl_LimitGetCommands(3), Tcl_LimitGetGranularity(3), Tcl_LimitGetTime(3), Tcl_LimitReady(3), Tcl_LimitRemoveHandler(3), Tcl_LimitSetCommands(3), Tcl_LimitSetGranularity(3), Tcl_LimitSetTime(3), Tcl_LimitTypeEnabled(3), Tcl_LimitTypeExceeded(3), Tcl_LimitTypeReset(3), Tcl_LimitTypeSet(3)
manage and check resource limits on interpreters
XAddHost(3), XAddHosts(3), XListHosts(3), XRemoveHost(3), XRemoveHosts(3), XSetAccessControl(3), XEnableAccessControl(3), XDisableAccessControl(3), XHostAddress(3), XServerInterpretedAddress(3)
control host access and host control structure
XSynchronize(3), XSetAfterFunction(3)
enable or disable synchronization
XkbChangeEnabledControls(3)
Manipulates the EnabledControls control
XmDropTransferAdd(3)
A Drag and Drop function that enables additional drop transfer entries to be processed after initiating a drop transfer "XmDropTransferAdd" "Drag and Drop functions" "XmDropTransferAdd"
XmTextEnableRedisplay(3)
A Text function that forces the visual update of a Text widget "XmTextEnableRedisplay" "Text functions" "XmTextEnableRedisplay"
XmtLayoutDisableLayout(3), XmtLayoutDisableLayout()(3), XmtLayoutEnableLayout()(3)
temporarily disable layout computation for an XmtLayout widget
XvSelectPortNotify(3)
enable or disable XvPortNotify events
XvSelectVideoNotify(3)
enable or disable VideoNotify events
al_enable_menu_event_source(3)
Allegro 5 API
appjail-enable(1)
Set default parameters for stages
appjail-enabled(1)
Get the value for a given enabled parameter
aranym-jit(1), ARAnyM(1)
Atari Running on Any Machine - JIT enabled
aranym-mmu(1), ARAnyM(1)
Atari Running on Any Machine with 68040 MMU enabled
barman-cloud-wal-archive(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-wal-archive [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ { { -z | --gzip } | { -j | --bzip2 } | --xz | --snappy | --zstd | --lz4 } ] [ --compression-level COMPRESSION_LEVEL ] [ --tag KEY,VALUE [ --tag KEY,VALUE ... ] ] [ --history-tag KEY,VALUE [ --history-tag KEY,VALUE ... ] ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { -e | --encryption } ENCRYPTION ] [ --sse-kms-key-id SSE_KMS_KEY_ID ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --encryption-scope ENCRYPTION_SCOPE ] [ --max-block-size MAX_BLOCK_SIZE ] [ --max-concurrency MAX_CONCURRENCY ] [ --max-single-put-size MAX_SINGLE_PUT_SIZE ] [ --kms-key-name KMS_KEY_NAME ] DESTINATION_URL SERVER_NAME [ WAL_PATH ] Description The barman-cloud-wal-archive command is designed to be used in the archive_command of a Postgres server to directly ship WAL files to cloud storage. NOTE: 0.0 3.5 If you are using Python 2 or unsupported versions of Python 3, avoid using the compression options --gzip or --bzip2. The script cannot restore gzip-compressed WALs on Python < 3.2 or bzip2-compressed WALs on Python < 3.3. This script enables the direct transfer of WAL files to cloud storage, bypassing the Barman server. Additionally, it can be utilized as a hook script for WAL archiving (pre_archive_retry_script). NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 SERVER_NAME Name of the server that will have the WALs archived. DESTINATION_URL URL of the cloud destination, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. WAL_PATH The value of the (aq%p(aq keyword (according to archive_command). -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. -z / --gzip gzip-compress the WAL while uploading to the cloud. -j / --bzip2 bzip2-compress the WAL while uploading to the cloud. --xz xz-compress the WAL while uploading to the cloud. --snappy snappy-compress the WAL while uploading to the cloud (requires the python-snappy Python library to be installed). --zstd zstd-compress the WAL while uploading to the cloud (requires the zstandard Python library to be installed). --lz4 lz4-compress the WAL while uploading to the cloud (requires the lz4 Python library to be installed). --compression-level A compression level to be used by the selected compression algorithm. Valid values are integers within the supported range of the chosen algorithm or one of the predefined labels: low, medium, and high. The range of each algorithm as well as what level each predefined label maps to can be found in %compression_level. --tag Tag to be added to archived WAL files in cloud storage. --tags Tag to be added to archived WAL files in cloud storage. NOTE: 0.0 3.5 If you are using --tags before positional arguments, you must insert -- after it to indicate the end of optional arguments. This tells the parser to treat everything after -- as positional arguments. Without the --, Barman may misinterpret positional arguments as values for the last option. Deprecated since version 3.15: --tags is deprecated. Use --tag instead. 0.0 --history-tag Tag to be added to archived history files in cloud storage. --history-tags Tags to be added to archived history files in cloud storage. NOTE: 0.0 3.5 If you are using --history-tags before positional arguments, you must insert -- after it to indicate the end of optional arguments. This tells the parser to treat everything after -- as positional arguments. Without the --, Barman may misinterpret positional arguments as values for the last option. Deprecated since version 3.15: --history-tags is deprecated. Use --history-tag instead. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file)
replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). -e / --encryption The encryption algorithm used when storing the uploaded data in S3. Allowed options: 7.0 (bu 2 AES256. (bu 2 aws:kms. --sse-kms-key-id The AWS KMS key ID that should be used for encrypting the uploaded data in S3. Can be specified using the key ID on its own or using the full ARN for the key. Only allowed if -e / --encryption is set to aws:kms. Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default. --encryption-scope The name of an encryption scope defined in the Azure Blob Storage service which is to be used to encrypt the data in Azure. --max-block-size The chunk size to be used when uploading an object via the concurrent chunk method (default: 4MB). --max-concurrency The maximum number of chunks to be uploaded concurrently (default: 1). --max-single-put-size Maximum size for which the Azure client will upload an object in a single request (default: 64MB). If this is set lower than the Postgres WAL segment size after any applied compression then the concurrent chunk upload method for WAL archiving will be used. Extra options for GCP cloud provider 0.0 --kms-key-name The name of the GCP KMS key which should be used for encrypting the uploaded data in GCS
battmond(1)
monitor battery level on ACPI-enabled (laptop) computers
beetsconfig(5)
beets configuration file Beets has an extensive configuration system that lets you customize nearly every aspect of its operation. To configure beets, you create a file called config.yaml. The location of the file depends on your platform (type beet config -p to see the path on your system): 0.0 (bu 2 On Unix-like OSes, write ~/.config/beets/config.yaml. (bu 2 On Windows, use %APPDATA%ebeetseconfig.yaml. This is usually in a directory like C:eUserseYoueAppDataeRoaming. (bu 2 On OS X, you can use either the Unix location or ~/Library/Application Support/beets/config.yaml. You can launch your text editor to create or update your configuration by typing beet config -e. (See the X'tty: link #config-cmd'%configX'tty: link' command for details.) It is also possible to customize the location of the configuration file and even use multiple layers of configuration. See %Configuration Location, below. The config file uses X'tty: link https://yaml.org/'%YAMLX'tty: link' syntax. You can use the full power of YAML, but most configuration options are simple key/value pairs. This means your config file will look like this: 0.0 3.5 option: value another_option: foo bigger_option: key: value foo: bar In YAML, you will need to use spaces (not tabs!) to indent some lines. If you have questions about more sophisticated syntax, take a look at the X'tty: link https://yaml.org/'%YAMLX'tty: link' documentation. The rest of this page enumerates the dizzying litany of configuration options available in beets. You might also want to see an %example. 0.0 (bu 2 %Global Options 2.0 (bu 2 %library (bu 2 %directory (bu 2 %plugins (bu 2 %include (bu 2 %pluginpath (bu 2 %ignore (bu 2 %ignore_hidden (bu 2 %replace (bu 2 %path_sep_replace (bu 2 %asciify_paths (bu 2 %art_filename (bu 2 %threaded (bu 2 %format_item (bu 2 %format_album (bu 2 %sort_item (bu 2 %sort_album (bu 2 %sort_case_insensitive (bu 2 %original_date (bu 2 %artist_credit (bu 2 %per_disc_numbering (bu 2 %aunique (bu 2 %sunique (bu 2 %terminal_encoding (bu 2 %clutter (bu 2 %max_filename_length (bu 2 %id3v23 (bu 2 %va_name (bu 2 %UI Options 2.0 (bu 2 %color (bu 2 %colors (bu 2 %terminal_width (bu 2 %length_diff_thresh (bu 2 %import (bu 2 %Importer Options 2.0 (bu 2 %write (bu 2 %copy (bu 2 %move (bu 2 %link (bu 2 %hardlink (bu 2 %reflink (bu 2 %resume (bu 2 %incremental (bu 2 %incremental_skip_later (bu 2 %from_scratch (bu 2 %quiet (bu 2 %quiet_fallback (bu 2 %none_rec_action (bu 2 %timid (bu 2 %log (bu 2 %default_action (bu 2 %languages (bu 2 %ignored_alias_types (bu 2 %detail (bu 2 %group_albums (bu 2 %autotag (bu 2 %duplicate_keys (bu 2 %duplicate_action (bu 2 %duplicate_verbose_prompt (bu 2 %bell (bu 2 %set_fields (bu 2 %singleton_album_disambig (bu 2 %MusicBrainz Options 2.0 (bu 2 %enabled (bu 2 %searchlimit (bu 2 %extra_tags (bu 2 %genres (bu 2 %external_ids (bu 2 %Autotagger Matching Options 2.0 (bu 2 %max_rec (bu 2 %preferred (bu 2 %ignored (bu 2 %required (bu 2 %ignored_media (bu 2 %ignore_data_tracks (bu 2 %ignore_video_tracks (bu 2 %Path Format Configuration (bu 2 %Configuration Location 2.0 (bu 2 %Environment Variable (bu 2 %Command-Line Option (bu 2 %Default Location (bu 2 %Example
benchmark_enable(3), benchmark_enable (3)
Toggle the gathering of benchmark data on / off
byobu-enable(1), byobu-disable(1)
wrapper script for enabling/disabling automatic startup of byobu after login into text console
byobu-prompt(1), byobu-enable-prompt(1), byobu-disable-prompt(1)
add and remove a nice color prompt to your shell configuration
coredns-auto(7), auto(7)
enables serving zone data from an RFC 1035-style master file, which is automatically picked up from disk
coredns-azure(7), azure(7)
enables serving zone data from Microsoft Azure DNS service
coredns-cache(7), cache(7)
enables a frontend cache
coredns-clouddns(7), clouddns(7)
enables serving zone data from GCP Cloud DNS
coredns-dns64(7), dns64(7)
enables DNS64 IPv6 transition mechanism
coredns-dnssec(7), dnssec(7)
enables on-the-fly DNSSEC signing of served data
coredns-dnstap(7), dnstap(7)
enables logging to dnstap
coredns-errors(7), errors(7)
enables error logging
coredns-etcd(7), etcd(7)
enables SkyDNS service discovery from etcd
coredns-file(7), file(7)
enables serving zone data from an RFC 1035-style master file
coredns-health(7), health(7)
enables a health check endpoint
coredns-hosts(7), hosts(7)
enables serving zone data from a /etc/hosts style file
coredns-kubernetes(7), kubernetes(7)
enables reading zone data from a Kubernetes cluster
coredns-log(7), log(7)
enables query logging to standard output
coredns-metadata(7), metadata(7)
enables a metadata collector
coredns-metrics(7), prometheus(7)
enables Prometheus [la]https://prometheus.io/[ra] metrics
coredns-ready(7), ready(7)
enables a readiness check HTTP endpoint
coredns-route53(7), route53(7)
enables serving zone data from AWS route53
coredns-secondary(7), secondary(7)
enables serving a zone retrieved from a primary server
coredns-trace(7), trace(7)
enables OpenTracing-based tracing of DNS requests as they go through the plugin chain
cupsdisable(8), cupsenable(8)
stop/start printers and classes
cvswrap(1)
wrapper over cvs to enable fine grained access control to repositories
enable_hardware_cursor(3)
Enables the OS hardware cursor. Allegro game programming library
enable_triple_buffer(3)
Enables triple buffering. Allegro game programming library
enadis.cgi(8)
CGI program to enable/disable Xymon tests
fi_endpoint(3)
Fabric endpoint operations fi_endpoint / fi_scalable_ep / fi_passive_ep / fi_close Allocate or close an endpoint. fi_ep_bind Associate an endpoint with hardware resources, such as event queues, completion queues, counters, address vectors, or shared transmit/receive contexts. fi_scalable_ep_bind Associate a scalable endpoint with an address vector fi_pep_bind Associate a passive endpoint with an event queue fi_enable Transitions an active endpoint into an enabled state. fi_cancel Cancel a pending asynchronous data transfer fi_ep_alias Create an alias to the endpoint fi_control Control endpoint operation. fi_getopt / fi_setopt Get or set endpoint options. fi_rx_context / fi_tx_context / fi_srx_context / fi_stx_context Open a transmit or receive context. fi_tc_dscp_set / fi_tc_dscp_get Convert between a DSCP value and a network traffic class fi_rx_size_left / fi_tx_size_left (DEPRECATED) Query the lower bound on how many RX/TX operations may be posted without an operation returning -FI_EAGAIN. This functions have been deprecated and will be removed in a future version of the library
fi_mr(3)
Memory region operations fi_mr_reg / fi_mr_regv / fi_mr_regattr Register local memory buffers for direct fabric access fi_close Deregister registered memory buffers. fi_mr_desc Return a local descriptor associated with a registered memory region fi_mr_key Return the remote key needed to access a registered memory region fi_mr_raw_attr Return raw memory region attributes. fi_mr_map_raw Converts a raw memory region key into a key that is usable for data transfer operations. fi_mr_unmap_key Releases a previously mapped raw memory region key. fi_mr_bind Associate a registered memory region with a completion counter or an endpoint. fi_mr_refresh Updates the memory pages associated with a memory region. fi_mr_enable Enables a memory region for use
fi_provider(3), fi_prov_ini(3)
External provider entry point fi_param_define / fi_param_get Register and retrieve environment variables with the libfabric core fi_log_enabled / fi_log_ready / fi_log Control and output debug logging information. fi_open / fi_close Open a named library object fi_export_fid / fi_import_fid Share a fabric object between different providers or resources
fido_dev_enable_entattest(3), fido_dev_toggle_always_uv(3), fido_dev_force_pin_change(3), fido_dev_set_pin_minlen(3), fido_dev_set_pin_minlen_rpid(3)
CTAP 2.1 configuration authenticator API
gc(3), GC_malloc(3), GC_malloc_atomic(3), GC_free(3), GC_realloc(3), GC_enable_incremental(3), GC_register_finalizer(3), GC_malloc_ignore_off_page(3), GC_malloc_atomic_ignore_off_page(3), GC_set_warn_proc(3)
Garbage collecting malloc replacement
gensio_acc_set_accept_callback_enable(3), gensio_acc_set_accept_callback_enable_cb(3), gensio_acc_set_accept_callback_enable_s(3)
Enable or disable the accept ready callback
gensio_set_read_callback_enable(3), gensio_set_write_callback_enable(3)
Enable or disable read data and write ready
gh-workflow-enable(1)
Enable a workflow
git-lfs-clone(1)
Efficiently clone a LFS-enabled repository
glColorMask(3), "glColorMask(3)
enable and disable writing of frame buffer color components
glDepthMask(3), "glDepthMask(3)
enable or disable writing into the depth buffer
glInterleavedArrays(3), "glInterleavedArrays(3)
simultaneously specify and enable several interleaved arrays
glIsEnabled(3), "glIsEnabled(3)
test whether a capability is enabled
glXIsDirect(3), "glXIsDirect(3)
indicate whether direct rendering is enabled
gl_enableclipping(3)
enables clipping
gl_enablepageflipping(3)
enables automatic page flipping
gnutls_anti_replay_enable(3)
API function
gnutls_ecc_curve_set_enabled(3)
API function
gnutls_fips140_mode_enabled(3)
API function
gnutls_heartbeat_enable(3)
API function
gnutls_ocsp_status_request_enable_client(3)
API function
gnutls_protocol_set_enabled(3)
API function
gnutls_session_enable_compatibility_mode(3)
API function
gnutls_session_ticket_enable_client(3)
API function
gnutls_session_ticket_enable_server(3)
API function
gnutls_transport_is_ktls_enabled(3)
API function
icedtea-web(1)
provides a Free Software web browser plugin running applets written in the Java programming language and an implementation of Java Web Start, originally based on the NetX project. NetX allows Java applets and applications to be downloaded over the network, cached, and (by default) run in a secure sandbox environment. Subsequent runs of the applet download the latest version automatically. Update and security settings, among others, can be set using the itw-settings command. icedtea-web also includes a plugin to enable Java applets (http://www.java.com/en/download/testjava.jsp) within web browsers. Names and email addresses of contributors to this project can be found in the file AUTHORS in the IcedTea-Web root directory. The full GPLv2 license of this project can be found in the file COPYING in the IcedTea-Web root directory. News about releases of this project can be found in the file NEWS in the IcedTea-Web root directory
idevicedevmodectl(1)
Enable Developer Mode on iOS 16+ devices or print the current status
image_framecyclemode(3), image_framecyclemode (3)
Enable/Disable time-triggered active frameset frame cycling
ipmitool(1)
utility for controlling IPMI-enabled devices
keyok(3x), %keyok(3x)
enable or disable a curses keycode
knet_handle_crypto_rx_clear_traffic(3)
enable or disable RX processing of clear (unencrypted) traffic
knet_handle_enable_access_lists(3)
Enable or disable usage of access lists (default: off)
knet_handle_enable_filter(3)
install a filter to route packets
knet_handle_enable_pmtud_notify(3)
install a callback to receive PMTUd changes
knet_handle_enable_sock_notify(3)
Register a callback to receive socket events
knet_host_enable_status_change_notify(3)
Install a callback to get host status change events
knet_link_get_enable(3)
Find out whether a link is enabled or not
knet_link_set_enable(3)
Enable traffic on a link
kresd(8)
full caching DNSSEC-enabled Knot Resolver 5.7.6
libowfat_socket_fastopen(3), socket_fastopen(3)
enable TCP Fast Open on a server-side TCP socket
home | help