Skip site
navigation (1)Skip section navigation (2)
FreeBSD Manual Pages
- acl_is_trivial_np(3)
- determine whether ACL is trivial
- adm6996fc(4)
- driver for Infineon ADM6996FC fast ethernet switch chip
- ae(4)
- Attansic/Atheros L2 FastEthernet controller driver
- age(4)
- Attansic/Atheros L1 Gigabit Ethernet driver
- alc(4)
- Atheros AR813x/AR815x/AR816x/AR817x Gigabit/Fast Ethernet driver
- ale(4)
- Atheros AR8121/AR8113/AR8114 Gigabit/Fast Ethernet driver
- ar40xx(4), ar40xx_switch(4)
- Qualcomm IPQ4018/IPQ4019 Gigabit Ethernet switch driver
- arswitch(4)
- Atheros AR8000 series Ethernet switch driver
- aue(4)
- ADMtek AN986 Pegasus USB Fast Ethernet driver
- axe(4)
- ASIX Electronics AX88x7x/760 USB Ethernet driver
- axge(4)
- ASIX Electronics AX88178A/179/179A USB Gigabit Ethernet driver
- axp(4)
- Advanced Micro Devices 10G Ethernet driver
- bce(4)
- QLogic NetXtreme II (BCM5706/5708/5709/5716) PCI/PCIe Gigabit Ethernet adapter driver
- bfe(4)
- Broadcom BCM4401 Ethernet Device Driver
- bge(4)
- Broadcom BCM57xx/BCM590x Gigabit/Fast Ethernet driver
- bnxt(4)
- Broadcom NetXtreme-C/NetXtreme-E Family Ethernet driver
- bxe(4)
- QLogic NetXtreme II Ethernet 10Gb PCIe adapter driver
- cas(4)
- Sun Cassini/Cassini+ and National Semiconductor DP83065 Saturn Gigabit Ethernet driver
- cdce(4)
- USB Communication Device Class Ethernet (CDC ECM/NCM) driver
- cdceem(4)
- USB Communication Device Class Ethernet Emulation Model driver
- check_utility_compat(3)
- determine whether a utility should be compatible
- crunchide(1)
- hides symbol names from ld, for crunching programs together
- cue(4)
- CATC USB-EL1210A USB Ethernet driver
- cxgb(4)
- Chelsio T3 10 Gigabit Ethernet adapter driver
- cxgbe(4)
- Chelsio T4-, T5-, and T6-based 100Gb, 40Gb, 25Gb, 10Gb, and 1Gb Ethernet adapter driver
- cxgbetool(8)
- userspace companion to Chelsio cxgbe Ethernet driver
- cxgbev(4)
- Chelsio T4-, T5-, and T6-based 100Gb, 40Gb, 25Gb, 10Gb, and 1Gb Ethernet VF driver
- dc(4)
- DEC/Intel 21143 and clone 10/100 Ethernet driver
- dtsec(4)
- Freescale Datapath Acceleration Architecture-based Three-Speed Ethernet Controller device driver
- e6000sw(4)
- Marvell 88E6000 series Gigabit Ethernet switch driver
- e6060sw(4)
- Marvell 88E6060/88E6063/88E6065 Fast Ethernet switch driver
- edsc(4)
- Ethernet discard network interface
- em(4), lem(4), igb(4)
- Intel(R) PRO/1000 Gigabit Ethernet adapter driver
- enetc(4)
- Freescale ENETC PCIe Gigabit Ethernet driver
- enic(4)
- VIC Ethernet NIC driver
- epair(4)
- A pair of virtual back-to-back connected Ethernet interfaces
- et(4)
- Agere ET1310 10/100/Gigabit Ethernet driver
- ether_gen_addr(9)
- generate an arbitrary MAC address for use
- ethers(3), ether_line(3), ether_aton(3), ether_aton_r(3), ether_ntoa(3), ether_ntoa_r(3), ether_ntohost(3), ether_hostton(3)
- Ethernet address conversion and lookup routines
- ethers(5)
- ethernet address database
- etherswitch(4)
- Ethernet switch framework
- etherswitchcfg(8)
- configure a built-in Ethernet switch
- fnmatch(3)
- test whether a filename or pathname matches a shell-style pattern
- fwe(4)
- Ethernet emulation driver for FireWire
- fxp(4)
- Intel EtherExpress PRO/100 Ethernet device driver
- gem(4)
- GEM/GMAC Ethernet device driver
- genet(4)
- Raspberry Pi 4 / BCM2711 Gigabit Ethernet controller driver
- gve(4)
- Ethernet driver for Google Virtual NIC (gVNIC)
- iavf(4)
- Intel Ethernet Adaptive Virtual Function Driver
- ice(4)
- Intel Ethernet 800 Series 1GbE to 200GbE driver
- if_ntb(4)
- Virtual Ethernet interface for Non-Transparent Bridges
- igc(4)
- Intel Ethernet Controller I225 driver
- ip17x(4)
- IC Plus IP17x series Fast Ethernet switch driver
- ipheth(4)
- USB Apple iPhone/iPad tethered Ethernet driver
- ix(4)
- Intel 10Gb Ethernet driver
- ixl(4)
- Intel Ethernet 700 Series Driver
- jme(4)
- JMicron Gigabit/Fast Ethernet driver
- key_defined(3), %key_defined(3)
- test whether a curses keycode is defined
- ksz8995ma(4)
- driver for Micrel KSZ8995MA fast ethernet switch chip
- kue(4)
- Kawasaki LSI KL5KUSB101B USB Ethernet driver
- le(4)
- AMD Am7900 LANCE and Am79C9xx ILACC/PCnet Ethernet interface driver
- lge(4)
- Level 1 LXT1001 NetCellerator PCI Gigabit Ethernet adapter driver
- liquidio(4)
- Cavium 10Gb/25Gb Ethernet driver
- mac_is_present(3)
- report whether the running system has MAC support
- mac_seeotheruids(4)
- simple policy controlling whether users see other users
- mgb(4)
- Microchip LAN743x PCIe Gigabit Ethernet driver
- mge(4)
- Marvell Gigabit Ethernet device driver
- mlx5en(4)
- NVIDIA Mellanox ConnectX-4/5/6 [Dx/Ex/Lx] based 200Gb, 100Gb, 50Gb, 40Gb, 25Gb and 10Gb ethernet adapter driver
- mos(4)
- Moschip MCS7730/MCS7830/MCS7832 USB Ethernet driver
- msk(4)
- Marvell/SysKonnect Yukon II Gigabit Ethernet adapter driver
- mtkswitch(4)
- MediaTek/Ralink Ethernet switch driver
- muge(4)
- Microchip LAN78xx USB Gigabit Ethernet driver
- mxge(4)
- Myricom Myri10GE 10 Gigabit Ethernet adapter driver
- my(4)
- Myson Technology Ethernet PCI driver
- netfpga10g_nf10bmac(4)
- driver for the NetFPGA-10G Embedded CPU Ethernet Core
- nfe(4)
- NVIDIA nForce MCP Ethernet driver
- ng_bridge(4)
- Ethernet bridging netgraph node type
- ng_eiface(4)
- generic Ethernet interface netgraph node type
- ng_etf(4)
- Ethertype filtering netgraph node type
- ng_ether(4)
- Ethernet netgraph node type
- ng_ether_echo(4)
- netgraph ether_echo node type
- ng_macfilter(4)
- packet filtering netgraph node using ethernet MAC addresses
- nge(4)
- National Semiconductor PCI Gigabit Ethernet adapter driver
- pcap_can_set_rfmon(3)
- check whether monitor mode can be set for a not-yet-activated capture handle
- pcap_is_swapped(3)
- find out whether a savefile has the native byte order
- pcap_offline_filter(3)
- check whether a filter matches a packet
- pppoed(8)
- handle incoming PPP over Ethernet connections
- ptnet(4)
- Ethernet driver for passed-through netmap ports
- qlnxe(4)
- Cavium 25/40/100 Gigabit Ethernet & CNA Adapter Driver
- qlxgb(4)
- QLogic 10 Gigabit Ethernet & CNA Adapter Driver
- qlxgbe(4)
- QLogic 10 Gigabit Ethernet & CNA Adapter Driver
- qlxge(4)
- QLogic 8100 Series 10 Gigabit Ethernet Adapter Driver
- re(4)
- RealTek 8139C+/8169/816xS/811xS/8168/810xE/8111 PCI/PCIe Ethernet adapter driver
- rgephy(4)
- RealTek RTL8168/8169/8110/8211 series 10/100/1000 Gigabit Ethernet PHY driver
- rl(4)
- RealTek 8129/8139 Fast Ethernet device driver
- rpmatch(3)
- determine whether the response to a question is affirmative or negative
- rue(4)
- RealTek RTL8150 USB to Fast Ethernet controller driver
- sfxge(4)
- Solarflare 10Gb Ethernet adapter driver
- sge(4)
- Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet driver
- signbit(3)
- determine whether a floating-point number's sign is negative
- sis(4)
- SiS 900, SiS 7016 and NS DP83815/DP83816 Fast Ethernet device driver
- sk(4)
- SysKonnect SK-984x and SK-982x PCI Gigabit Ethernet adapter driver
- smsc(4)
- USB Microchip LAN9xxx Fast Ethernet driver
- sockatmark(3)
- determine whether the read pointer is at the OOB mark
- ste(4)
- Sundance Technologies ST201 Fast Ethernet device driver
- stge(4)
- Sundance/Tamarack TC9021 Gigabit Ethernet adapter driver
- sume(4)
- NetFPGA SUME 4x10Gb Ethernet driver
- tap(4), vmnet(4)
- Ethernet tunnel software network interface
- ti(4)
- Alteon Networks Tigon I and Tigon II Gigabit Ethernet driver
- tsec(4)
- Freescale Three-Speed Ethernet Controller device driver
- udav(4)
- Davicom DM9601 USB Ethernet driver
- ure(4)
- Realtek RTL8152/RTL8153/RTL8156 USB Ethernet driver
- urndis(4)
- USB Remote NDIS Ethernet device
- vale(4)
- a very fast Virtual Local Ethernet using the netmap API
- vge(4)
- VIA Networking Technologies Velocity Gigabit Ethernet adapter driver
- vr(4)
- VIA Technologies Rhine I/II/III Ethernet device driver
- vte(4)
- Vortex86 RDC R6040 Fast Ethernet driver
- vtnet(4)
- VirtIO Ethernet driver
- wake(8)
- send Wake on LAN frames to hosts on a local Ethernet network
- xl(4)
- 3Com Etherlink XL and Fast Etherlink XL Ethernet device driver
- xnb(4)
- Xen Paravirtualized Backend Ethernet Driver
- CT_POLICY_EVAL_CTX_new_ex(3), CT_POLICY_EVAL_CTX_new(3), CT_POLICY_EVAL_CTX_free(3), CT_POLICY_EVAL_CTX_get0_cert(3), CT_POLICY_EVAL_CTX_set1_cert(3), CT_POLICY_EVAL_CTX_get0_issuer(3), CT_POLICY_EVAL_CTX_set1_issuer(3), CT_POLICY_EVAL_CTX_get0_log_store(3), CT_POLICY_EVAL_CTX_set_shared_CTLOG_STORE(3), CT_POLICY_EVAL_CTX_get_time(3), CT_POLICY_EVAL_CTX_set_time(3)
- Encapsulates the data required to evaluate whether SCTs meet a Certificate Transparency policy
- SSL_CTX_has_client_custom_ext(3)
- check whether a handler exists for a particular client extension type
- SSL_CTX_set_read_ahead(3), SSL_CTX_get_read_ahead(3), SSL_set_read_ahead(3), SSL_get_read_ahead(3), SSL_CTX_get_default_read_ahead(3)
- manage whether to read as many input bytes as possible
- SSL_SESSION_is_resumable(3)
- determine whether an SSL_SESSION object can be used for resumption
- SSL_session_reused(3)
- query whether a reused session was negotiated during handshake
- BSctx_set_guess(3)
- Set whether to use zero as the initial vector for the iterative method or use the values given in the vector passed to the iterative method
- BSctx_set_pr(3)
- Set whether information on reordering should be printed
- BSctx_set_print_log(3)
- Set whether logging information is printed
- BSctx_set_rt(3)
- Set whether information for fast future permutations with the same matrix structure should be kept
- BSctx_set_scaling(3)
- Set whether or not the linear system should solved or not
- BSctx_set_si(3)
- Set whether or not inodes and cliques will be found
- CT_POLICY_EVAL_CTX_new(3), CT_POLICY_EVAL_CTX_free(3), CT_POLICY_EVAL_CTX_get0_cert(3), CT_POLICY_EVAL_CTX_set1_cert(3), CT_POLICY_EVAL_CTX_get0_issuer(3), CT_POLICY_EVAL_CTX_set1_issuer(3), CT_POLICY_EVAL_CTX_get0_log_store(3), CT_POLICY_EVAL_CTX_set_shared_CTLOG_STORE(3), CT_POLICY_EVAL_CTX_get_time(3), CT_POLICY_EVAL_CTX_set_time(3)
- Encapsulates the data required to evaluate whether SCTs meet a Certificate Transparency policy
- CT_POLICY_EVAL_CTX_new_ex(3ossl), CT_POLICY_EVAL_CTX_new(3ossl), CT_POLICY_EVAL_CTX_free(3ossl), CT_POLICY_EVAL_CTX_get0_cert(3ossl), CT_POLICY_EVAL_CTX_set1_cert(3ossl), CT_POLICY_EVAL_CTX_get0_issuer(3ossl), CT_POLICY_EVAL_CTX_set1_issuer(3ossl), CT_POLICY_EVAL_CTX_get0_log_store(3ossl), CT_POLICY_EVAL_CTX_set_shared_CTLOG_STORE(3ossl), CT_POLICY_EVAL_CTX_get_time(3ossl), CT_POLICY_EVAL_CTX_set_time(3ossl)
- Encapsulates the data required to evaluate whether SCTs meet a Certificate Transparency policy
- CURLINFO_USED_PROXY(3)
- whether the transfer used a proxy
- FcFileIsDir(3)
- check whether a file is a directory
- FcPatternIterIsValid(3)
- Check whether the iterator is valid or not
- MPIX_GPU_query_support(3)
- Returns whether the specific type of GPU is supported
- MPIX_Query_cuda_support(3)
- Returns whether CUDA is supported
- MPIX_Query_hip_support(3)
- Returns whether HIP (AMD GPU) is supported
- MPIX_Query_ze_support(3)
- Returns whether ZE (Intel GPU) is supported
- MPI_Finalized(3)
- Indicates whether MPI_Finalize has been called
- MPI_Gather(3)
- Gathers together values from a group of processes
- MPI_Igather(3)
- Gathers together values from a group of processes in a nonblocking way
- MPI_Initialized(3)
- Indicates whether MPI_Init has been called
- MPI_Is_thread_main(3)
- Returns a flag indicating whether this thread called MPI_Init or MPI_Init_thread
- MPI_Win_test(3)
- Test whether an RMA exposure epoch has completed
- MyStyle(1x)
- defines combination of color, font, style, background to be used together
- SDL_ShowCursor(3)
- Toggle whether or not the cursor is shown on the screen
- SSL_CTX_has_client_custom_ext(3)
- check whether a handler exists for a particular client extension type
- SSL_CTX_has_client_custom_ext(3ossl)
- check whether a handler exists for a particular client extension type
- SSL_CTX_set_read_ahead(3), SSL_CTX_get_read_ahead(3), SSL_set_read_ahead(3), SSL_get_read_ahead(3), SSL_CTX_get_default_read_ahead(3)
- manage whether to read as many input bytes as possible
- SSL_CTX_set_read_ahead(3ossl), SSL_CTX_get_read_ahead(3ossl), SSL_set_read_ahead(3ossl), SSL_get_read_ahead(3ossl), SSL_CTX_get_default_read_ahead(3ossl)
- manage whether to read as many input bytes as possible
- SSL_SESSION_is_resumable(3)
- determine whether an SSL_SESSION object can be used for resumption
- SSL_SESSION_is_resumable(3ossl)
- determine whether an SSL_SESSION object can be used for resumption
- SSL_session_reused(3)
- query whether a reused session was negotiated during handshake
- SSL_session_reused(3ossl)
- query whether a reused session was negotiated during handshake
- TIFFFieldPassCount(3tiff)
- get whether to pass a count to TIFFGetField/TIFFSetField
- TPMLIB_WasManufactured(3), TPMLIB_WasManufactured (3)
- Check whether a new instance was created
- Tcl_StringCaseMatch.tcl86(3), Tcl_StringMatch(3), Tcl_StringCaseMatch(3)
- test whether a string matches a pattern
- Tcl_StringCaseMatch.tcl90(3), Tcl_StringMatch(3), Tcl_StringCaseMatch(3)
- test whether a string matches a pattern
- XkbGetDetectableAutoRepeat(3)
- Determines whether or not the server supports DetectableAutoRepeat
- XkbGetDeviceInfo(3)
- Determine whether the X server allows Xkb access to particular capabilities of input devices other than the core X keyboard, or to determine the status of indicator maps, indicator names or button actions on a non-KeyClass extension device
- XmIconBoxIsCellEmpty(3)
- A function that determines whether a cell in the IconBox is empty "XmIconBoxIsCellEmpty" "IconBox functions" "XmIconBoxIsCellEmpty"
- XmIsMotifWMRunning(3)
- A function that determines whether the window manager is running "XmIsMotifWMRunning"
- XmIsTraversable(3)
- A function that identifies whether a widget can be traversed "XmIsTraversable"
- XmStringHasSubstring(3)
- A compound string function that indicates whether one compound string is contained within another "XmStringHasSubstring" "compound string functions" "XmStringHasSubstring"
- XmTargetsAreCompatible(3)
- A function that tests whether the target types match between a drop site and source object "XmTargetsAreCompatible" "Drag and Drop functions" "XmTargetsAreCompatible"
- accept_check(1)
- Check whether a grammar accept / reject given word sequences
- addrwatch(8)
- ethernet/ip address monitoring tool
- arpsnmp(8)
- keep track of ethernet/ip address pairings
- arpwatch(8)
- keep track of ethernet/ip address pairings
- bittwist(1)
- -- pcap based ethernet packet generator
- cdpd(8)
- Send CDP/LLDP packets over ethernet
- chkascii(1)
- a small C program that checks whether a file is purely ASCII plain-text or else contains any non-ASCII characters
- ck_array_initialized(3)
- indicates whether an array was recently initialized or deinitialized
- ck_ht_entry_empty(3)
- determine whether entry contains a key-value pair
- concat.tcl86(n), concat(n)
- Join lists together
- concat.tcl90(n), concat(n)
- Join lists together
- dc_device_set_cancel(3)
- callback to check whether processing should cancel
- detect_digi_driver(3)
- Detects whether the specified digital sound device is available. Allegro game programming library
- detect_midi_driver(3)
- Detects whether the specified MIDI sound device is available. Allegro game programming library
- dhcdrop(8)
- program for searching and suppress false DHCP servers in Ethernet
- dns-ethers(1)
- generate /etc/ethers entries from DNS tables "dns-ethers(1)" "generate /etc/ethers entries from DNS tables"
- dns-ethers-import(1)
- generate DNS tables from /etc/ethers entries "dns-ethers-import(1)" "generate DNS tables from /etc/ethers entries"
- dnsjit.core.object.ether(3)
- Ether part of a packet
- dnsjit.filter.layer(3)
- Parse the ether/IP stack
- dnstable_merge(1)
- merge multiple dnstable data files together
- drmAvailable(3)
- determine whether a DRM kernel driver has been loaded
- entangle(1)
- tethered camera control & capture
- etherape(1)
- graphical network traffic browser
- expect_multixterm(1), multixterm(1)
- drive multiple xterms separately or together
- fblocked.tcl86(n), fblocked(n)
- Test whether the last input operation exhausted all available input
- fblocked.tcl90(n), fblocked(n)
- Test whether the last input operation exhausted all available input
- fixmul(3)
- Multiplies two fixed point values together. Allegro game programming library
- floppyd_installtest(1)
- tests whether floppyd is installed and running '" t TQ $1 . (is' (if` (pd"
- gdal-raster-stack(1)
- Combine together input bands into a multi-band output, either virtual (VRT) or materialized Added in version 3.11
- git-merge(1)
- Join two or more development histories together
- git-subtree(1)
- Merge subtrees together and split repository into subtrees
- glCullFace(3), "glCullFace(3)
- specify whether front- or back-facing facets can be culled
- glIsEnabled(3), "glIsEnabled(3)
- test whether a capability is enabled
- glXIsDirect(3), "glXIsDirect(3)
- indicate whether direct rendering is enabled
- glXQueryExtension(3), "glXQueryExtension(3)
- indicate whether the GLX extension is supported
- glutExtensionSupported(3)
- helps to easily determine whether a given OpenGL extension is supported
- gpathchk(1), pathchk(1)
- check whether file names are valid or portable
- gutenfetch_is_threadsafe(3)
- -- Determine whether the gutenfetch library is thread-safe or not
- hypervisor_mode(7)
- allows you to run simultaneously many virtual router instances, and to simulate ATM, Ethernet or Frame(hyRelay networks
- ipguard(8)
- tool designed to protect Ethernet LAN IP address space by ARP spoofing
- isutf8(1)
- check whether files are valid UTF-8
- ixgbe(4)
- Intel® Ethernet Driver for the FreeBSD* operating system
- join.tcl86(n), join(n)
- Create a string by joining together list elements
- join.tcl90(n), join(n)
- Create a string by joining together list elements
- key_defined(3x), %key_defined(3x)
- test whether a curses keycode is defined
- khttp_fcgi_test(3)
- test whether kcgi is using FastCGI
- knet_link_get_enable(3)
- Find out whether a link is enabled or not
- kpseaccess(1)
- determine whether a file can be accessed
- libowfat_critbit0_contains(3), critbit0_contains(3)
- check whether a string is in the critbit tree
