FreeBSD Manual Pages

home | help

CMSG_DATA(3), CMSG_FIRSTHDR(3), CMSG_LEN(3), CMSG_NXTHDR(3), CMSG_SPACE(3): socket control message routines for ancillary data access
INSERT_OBJECT_OID_LINK_INDEX(3), INSERT_OBJECT_INT_LINK_INDEX(3), FIND_OBJECT_OID_LINK_INDEX(3), NEXT_OBJECT_OID_LINK_INDEX(3), FIND_OBJECT_INT_LINK_INDEX(3), NEXT_OBJECT_INT_LINK_INDEX(3), INSERT_OBJECT_OID_LINK(3), INSERT_OBJECT_INT_LINK(3), FIND_OBJECT_OID_LINK(3), NEXT_OBJECT_OID_LINK(3), FIND_OBJECT_INT_LINK(3), NEXT_OBJECT_INT_LINK(3), INSERT_OBJECT_OID(3), INSERT_OBJECT_INT(3), FIND_OBJECT_OID(3), FIND_OBJECT_INT(3), NEXT_OBJECT_OID(3), NEXT_OBJECT_INT(3), this_tick(3), start_tick(3), get_ticks(3), systemg(3), comm_define(3), community(3), oid_zeroDotZero(3), oid_usmUnknownEngineIDs(3), oid_usmNotInTimeWindows(3), reqid_allocate(3), reqid_next(3), reqid_base(3), reqid_istype(3), reqid_type(3), timer_start(3), timer_start_repeat(3), timer_stop(3), fd_select(3), fd_deselect(3), fd_suspend(3), fd_resume(3), or_register(3), or_unregister(3), buf_alloc(3), buf_size(3), snmp_input_start(3), snmp_input_finish(3), snmp_output(3), snmp_send_port(3), snmp_send_trap(3), snmp_pdu_auth_access string_save(3), string_commit(3), string_rollback(3), string_get(3), string_get_max(3), string_free(3), ip_save(3), ip_rollback(3), ip_commit(3), ip_get(3), oid_save(3), oid_rollback(3), oid_commit(3), oid_get(3), index_decode(3), index_compare(3), index_compare_off(3), index_append(3), index_append_off(3), snmpd_usmstats(3), bsnmpd_get_usm_stats(3), bsnmpd_reset_usm_stats(3), usm_first_user(3), usm_next_user(3), usm_find_user(3), usm_new_user(3), usm_delete_user(3), usm_flush_users(3), usm_user(3), snmpd_target_stat(3), bsnmpd_get_target_stats(3), target_first_address(3), target_next_address(3), target_new_address(3), target_activate_address(3), target_delete_address(3), target_first_param(3), target_next_param(3), target_new_param(3), target_delete_param(3), target_first_notify(3), target_next_notify(3), target_new_notify(3), target_delete_notify(3), target_flush_all(3), target_address(3), target_param(3), target_notify(3): SNMP daemon loadable module interface
SLIST_CLASS_ENTRY(3), SLIST_CLASS_HEAD(3), SLIST_CONCAT(3), SLIST_EMPTY(3), SLIST_ENTRY(3), SLIST_FIRST(3), SLIST_FOREACH(3), SLIST_FOREACH_FROM(3), SLIST_FOREACH_FROM_SAFE(3), SLIST_FOREACH_SAFE(3), SLIST_HEAD(3), SLIST_HEAD_INITIALIZER(3), SLIST_INIT(3), SLIST_INSERT_AFTER(3), SLIST_INSERT_HEAD(3), SLIST_NEXT(3), SLIST_REMOVE(3), SLIST_REMOVE_AFTER(3), SLIST_REMOVE_HEAD(3), SLIST_SWAP(3), STAILQ_CLASS_ENTRY(3), STAILQ_CLASS_HEAD(3), STAILQ_CONCAT(3), STAILQ_EMPTY(3), STAILQ_ENTRY(3), STAILQ_FIRST(3), STAILQ_FOREACH(3), STAILQ_FOREACH_FROM(3), STAILQ_FOREACH_FROM_SAFE(3), STAILQ_FOREACH_SAFE(3), STAILQ_HEAD(3), STAILQ_HEAD_INITIALIZER(3), STAILQ_INIT(3), STAILQ_INSERT_AFTER(3), STAILQ_INSERT_HEAD(3), STAILQ_INSERT_TAIL(3), STAILQ_LAST(3), STAILQ_NEXT(3), STAILQ_REMOVE(3), STAILQ_REMOVE_AFTER(3), STAILQ_REMOVE_HEAD(3), STAILQ_SWAP(3), LIST_CLASS_ENTRY(3), LIST_CLASS_HEAD(3), LIST_CONCAT(3), LIST_EMPTY(3), LIST_ENTRY(3), LIST_FIRST(3), LIST_FOREACH(3), LIST_FOREACH_FROM(3), LIST_FOREACH_FROM_SAFE(3), LIST_FOREACH_SAFE(3), LIST_HEAD(3), LIST_HEAD_INITIALIZER(3), LIST_INIT(3), LIST_INSERT_AFTER(3), LIST_INSERT_BEFORE(3), LIST_INSERT_HEAD(3), LIST_NEXT(3), LIST_PREV(3), LIST_REMOVE(3), LIST_SWAP(3), TAILQ_CLASS_ENTRY(3), TAILQ_CLASS_HEAD(3), TAILQ_CONCAT(3), TAILQ_EMPTY(3), TAILQ_ENTRY(3), TAILQ_FIRST(3), TAILQ_FOREACH(3), TAILQ_FOREACH_FROM(3), TAILQ_FOREACH_FROM_SAFE(3), TAILQ_FOREACH_REVERSE(3), TAILQ_FOREACH_REVERSE_FROM(3), TAILQ_FOREACH_REVERSE_FROM_SAFE(3), TAILQ_FOREACH_REVERSE_SAFE(3), TAILQ_FOREACH_SAFE(3), TAILQ_HEAD(3), TAILQ_HEAD_INITIALIZER(3), TAILQ_INIT(3), TAILQ_INSERT_AFTER(3), TAILQ_INSERT_BEFORE(3), TAILQ_INSERT_HEAD(3), TAILQ_INSERT_TAIL(3), TAILQ_LAST(3), TAILQ_NEXT(3), TAILQ_PREV(3), TAILQ_REMOVE(3), TAILQ_SWAP(3): implementations of singly-linked lists, singly-linked tail queues, lists and tail queues
accf_dns(9): buffer incoming DNS requests until the whole first request is present
cgetent(3), cgetset(3), cgetmatch(3), cgetcap(3), cgetnum(3), cgetstr(3), cgetustr(3), cgetfirst(3), cgetnext(3), cgetclose(3): capability database access routines
dbm_clearerr(3), dbm_close(3), dbm_delete(3), dbm_dirfno(3), dbm_error(3), dbm_fetch(3), dbm_firstkey(3), dbm_nextkey(3), dbm_open(3), dbm_store(3): database access functions
dwarf_find_macro_value_start(3): return the address of the first byte of a macro value
ffs(3), ffsl(3), ffsll(3), fls(3), flsl(3), flsll(3): find first or last bit set in a bit string
head(1): display first lines of a file
j0(3), j0f(3), j1(3), j1f(3), jn(3), jnf(3), y0(3), y0f(3), y1(3), y1f(3), yn(3), ynf(3): Bessel functions of first and second kind
kldfirstmod(2): return first module id from the kld file specified
pthread_cleanup_pop(3): call the first cleanup routine
rman(9), rman_activate_resource(9), rman_adjust_resource(9), rman_deactivate_resource(9), rman_fini(9), rman_init(9), rman_init_from_resource(9), rman_is_region_manager(9), rman_manage_region(9), rman_first_free_region(9), rman_last_free_region(9), rman_release_resource(9), rman_reserve_resource(9), rman_reserve_resource_bound(9), rman_make_alignment_flags(9), rman_get_start(9), rman_get_end(9), rman_get_device(9), rman_get_size(9), rman_get_flags(9), rman_set_mapping(9), rman_get_mapping(9), rman_set_virtual(9), rman_get_virtual(9), rman_set_bustag(9), rman_get_bustag(9), rman_set_bushandle(9), rman_get_bushandle(9), rman_set_rid(9), rman_get_rid(9): resource management functions
snmp_mibII(3), mibII(3), mibif_notify_f(3), mib_netsock(3), mib_if_set_dyn(3), mib_refresh_iflist(3), mib_find_if(3), mib_find_if_sys(3), mib_find_if_name(3), mib_first_if(3), mib_next_if(3), mib_register_newif(3), mib_unregister_newif(3), mib_fetch_ifmib(3), mib_if_admin(3), mib_find_ifa(3), mib_first_ififa(3), mib_next_ififa(3), mib_ifstack_create(3), mib_ifstack_delete(3), mib_find_rcvaddr(3), mib_rcvaddr_create(3), mib_rcvaddr_delete(3), mibif_notify(3), mibif_unnotify(3): mib-2 module for bsnmpd
ENGINE_get_DH(3), ENGINE_get_DSA(3), ENGINE_by_id(3), ENGINE_get_cipher_engine(3), ENGINE_get_default_DH(3), ENGINE_get_default_DSA(3), ENGINE_get_default_RAND(3), ENGINE_get_default_RSA(3), ENGINE_get_digest_engine(3), ENGINE_get_first(3), ENGINE_get_last(3), ENGINE_get_next(3), ENGINE_get_prev(3), ENGINE_new(3), ENGINE_get_ciphers(3), ENGINE_get_ctrl_function(3), ENGINE_get_digests(3), ENGINE_get_destroy_function(3), ENGINE_get_finish_function(3), ENGINE_get_init_function(3), ENGINE_get_load_privkey_function(3), ENGINE_get_load_pubkey_function(3), ENGINE_load_private_key(3), ENGINE_load_public_key(3), ENGINE_get_RAND(3), ENGINE_get_RSA(3), ENGINE_get_id(3), ENGINE_get_name(3), ENGINE_get_cmd_defns(3), ENGINE_get_cipher(3), ENGINE_get_digest(3), ENGINE_add(3), ENGINE_cmd_is_executable(3), ENGINE_ctrl(3), ENGINE_ctrl_cmd(3), ENGINE_ctrl_cmd_string(3), ENGINE_finish(3), ENGINE_free(3), ENGINE_get_flags(3), ENGINE_init(3), ENGINE_register_DH(3), ENGINE_register_DSA(3), ENGINE_register_RAND(3), ENGINE_register_RSA(3), ENGINE_register_all_complete(3), ENGINE_register_ciphers(3), ENGINE_register_complete(3), ENGINE_register_digests(3), ENGINE_remove(3), ENGINE_set_DH(3), ENGINE_set_DSA(3), ENGINE_set_RAND(3), ENGINE_set_RSA(3), ENGINE_set_ciphers(3), ENGINE_set_cmd_defns(3), ENGINE_set_ctrl_function(3), ENGINE_set_default(3), ENGINE_set_default_DH(3), ENGINE_set_default_DSA(3), ENGINE_set_default_RAND(3), ENGINE_set_default_RSA(3), ENGINE_set_default_ciphers(3), ENGINE_set_default_digests(3), ENGINE_set_default_string(3), ENGINE_set_destroy_function(3), ENGINE_set_digests(3), ENGINE_set_finish_function(3), ENGINE_set_flags(3), ENGINE_set_id(3), ENGINE_set_init_function(3), ENGINE_set_load_privkey_function(3), ENGINE_set_load_pubkey_function(3), ENGINE_set_name(3), ENGINE_up_ref(3), ENGINE_get_table_flags(3), ENGINE_cleanup(3), ENGINE_load_builtin_engines(3), ENGINE_register_all_DH(3), ENGINE_register_all_DSA(3), ENGINE_register_all_RAND(3), ENGINE_register_all_RSA(3), ENGINE_register_all_ciphers(3), ENGINE_register_all_digests(3), ENGINE_set_table_flags(3), ENGINE_unregister_DH(3), ENGINE_unregister_DSA(3), ENGINE_unregister_RAND(3), ENGINE_unregister_RSA(3), ENGINE_unregister_ciphers(3), ENGINE_unregister_digests(3): ENGINE cryptographic module support
CURLINFO_STARTTRANSFER_TIME(3): get the time until the first byte is received
CURLINFO_STARTTRANSFER_TIME_T(3): get the time until the first byte is received
CURLOPT_SASL_IR(3): send initial response in first packet
ENGINE_get_DH(3), ENGINE_get_DSA(3), ENGINE_by_id(3), ENGINE_get_cipher_engine(3), ENGINE_get_default_DH(3), ENGINE_get_default_DSA(3), ENGINE_get_default_RAND(3), ENGINE_get_default_RSA(3), ENGINE_get_digest_engine(3), ENGINE_get_first(3), ENGINE_get_last(3), ENGINE_get_next(3), ENGINE_get_prev(3), ENGINE_new(3), ENGINE_get_ciphers(3), ENGINE_get_ctrl_function(3), ENGINE_get_digests(3), ENGINE_get_destroy_function(3), ENGINE_get_finish_function(3), ENGINE_get_init_function(3), ENGINE_get_load_privkey_function(3), ENGINE_get_load_pubkey_function(3), ENGINE_load_private_key(3), ENGINE_load_public_key(3), ENGINE_get_RAND(3), ENGINE_get_RSA(3), ENGINE_get_id(3), ENGINE_get_name(3), ENGINE_get_cmd_defns(3), ENGINE_get_cipher(3), ENGINE_get_digest(3), ENGINE_add(3), ENGINE_cmd_is_executable(3), ENGINE_ctrl(3), ENGINE_ctrl_cmd(3), ENGINE_ctrl_cmd_string(3), ENGINE_finish(3), ENGINE_free(3), ENGINE_get_flags(3), ENGINE_init(3), ENGINE_register_DH(3), ENGINE_register_DSA(3), ENGINE_register_RAND(3), ENGINE_register_RSA(3), ENGINE_register_all_complete(3), ENGINE_register_ciphers(3), ENGINE_register_complete(3), ENGINE_register_digests(3), ENGINE_remove(3), ENGINE_set_DH(3), ENGINE_set_DSA(3), ENGINE_set_RAND(3), ENGINE_set_RSA(3), ENGINE_set_ciphers(3), ENGINE_set_cmd_defns(3), ENGINE_set_ctrl_function(3), ENGINE_set_default(3), ENGINE_set_default_DH(3), ENGINE_set_default_DSA(3), ENGINE_set_default_RAND(3), ENGINE_set_default_RSA(3), ENGINE_set_default_ciphers(3), ENGINE_set_default_digests(3), ENGINE_set_default_string(3), ENGINE_set_destroy_function(3), ENGINE_set_digests(3), ENGINE_set_finish_function(3), ENGINE_set_flags(3), ENGINE_set_id(3), ENGINE_set_init_function(3), ENGINE_set_load_privkey_function(3), ENGINE_set_load_pubkey_function(3), ENGINE_set_name(3), ENGINE_up_ref(3), ENGINE_get_table_flags(3), ENGINE_cleanup(3), ENGINE_load_builtin_engines(3), ENGINE_register_all_DH(3), ENGINE_register_all_DSA(3), ENGINE_register_all_RAND(3), ENGINE_register_all_RSA(3), ENGINE_register_all_ciphers(3), ENGINE_register_all_digests(3), ENGINE_set_table_flags(3), ENGINE_unregister_DH(3), ENGINE_unregister_DSA(3), ENGINE_unregister_RAND(3), ENGINE_unregister_RSA(3), ENGINE_unregister_ciphers(3), ENGINE_unregister_digests(3): ENGINE cryptographic module support
ENGINE_get_DH(3ossl), ENGINE_get_DSA(3ossl), ENGINE_by_id(3ossl), ENGINE_get_cipher_engine(3ossl), ENGINE_get_default_DH(3ossl), ENGINE_get_default_DSA(3ossl), ENGINE_get_default_RAND(3ossl), ENGINE_get_default_RSA(3ossl), ENGINE_get_digest_engine(3ossl), ENGINE_get_first(3ossl), ENGINE_get_last(3ossl), ENGINE_get_next(3ossl), ENGINE_get_prev(3ossl), ENGINE_new(3ossl), ENGINE_get_ciphers(3ossl), ENGINE_get_ctrl_function(3ossl), ENGINE_get_digests(3ossl), ENGINE_get_destroy_function(3ossl), ENGINE_get_finish_function(3ossl), ENGINE_get_init_function(3ossl), ENGINE_get_load_privkey_function(3ossl), ENGINE_get_load_pubkey_function(3ossl), ENGINE_load_private_key(3ossl), ENGINE_load_public_key(3ossl), ENGINE_get_RAND(3ossl), ENGINE_get_RSA(3ossl), ENGINE_get_id(3ossl), ENGINE_get_name(3ossl), ENGINE_get_cmd_defns(3ossl), ENGINE_get_cipher(3ossl), ENGINE_get_digest(3ossl), ENGINE_add(3ossl), ENGINE_cmd_is_executable(3ossl), ENGINE_ctrl(3ossl), ENGINE_ctrl_cmd(3ossl), ENGINE_ctrl_cmd_string(3ossl), ENGINE_finish(3ossl), ENGINE_free(3ossl), ENGINE_get_flags(3ossl), ENGINE_init(3ossl), ENGINE_register_DH(3ossl), ENGINE_register_DSA(3ossl), ENGINE_register_RAND(3ossl), ENGINE_register_RSA(3ossl), ENGINE_register_all_complete(3ossl), ENGINE_register_ciphers(3ossl), ENGINE_register_complete(3ossl), ENGINE_register_digests(3ossl), ENGINE_remove(3ossl), ENGINE_set_DH(3ossl), ENGINE_set_DSA(3ossl), ENGINE_set_RAND(3ossl), ENGINE_set_RSA(3ossl), ENGINE_set_ciphers(3ossl), ENGINE_set_cmd_defns(3ossl), ENGINE_set_ctrl_function(3ossl), ENGINE_set_default(3ossl), ENGINE_set_default_DH(3ossl), ENGINE_set_default_DSA(3ossl), ENGINE_set_default_RAND(3ossl), ENGINE_set_default_RSA(3ossl), ENGINE_set_default_ciphers(3ossl), ENGINE_set_default_digests(3ossl), ENGINE_set_default_string(3ossl), ENGINE_set_destroy_function(3ossl), ENGINE_set_digests(3ossl), ENGINE_set_finish_function(3ossl), ENGINE_set_flags(3ossl), ENGINE_set_id(3ossl), ENGINE_set_init_function(3ossl), ENGINE_set_load_privkey_function(3ossl), ENGINE_set_load_pubkey_function(3ossl), ENGINE_set_name(3ossl), ENGINE_up_ref(3ossl), ENGINE_get_table_flags(3ossl), ENGINE_cleanup(3ossl), ENGINE_load_builtin_engines(3ossl), ENGINE_register_all_DH(3ossl), ENGINE_register_all_DSA(3ossl), ENGINE_register_all_RAND(3ossl), ENGINE_register_all_RSA(3ossl), ENGINE_register_all_ciphers(3ossl), ENGINE_register_all_digests(3ossl), ENGINE_set_table_flags(3ossl), ENGINE_unregister_DH(3ossl), ENGINE_unregister_DSA(3ossl), ENGINE_unregister_RAND(3ossl), ENGINE_unregister_RSA(3ossl), ENGINE_unregister_ciphers(3ossl), ENGINE_unregister_digests(3ossl): ENGINE cryptographic module support
Event(3o): First-class synchronous communication
FcCharSetFirstPage(3): Start enumerating charset contents
FcPatternIterStart(3): Initialize the iterator with the first iterator in the pattern
FcStrListFirst(3): get first string in iteration
Judy1First(3), Judy1 functions(3): C library for creating and accessing a dynamic array of bits, using any value of a word as an index
Judy1FirstEmpty(3), Judy1 functions(3): C library for creating and accessing a dynamic array of bits, using any value of a word as an index
JudyLFirst(3), JudyL functions(3): C library for creating and accessing a dynamic array of words, using any value of a word as an index
JudyLFirstEmpty(3), JudyL functions(3): C library for creating and accessing a dynamic array of words, using any value of a word as an index
JudySLFirst(3), JudySL functions(3): C library for creating and accessing a dynamic array, using a null-terminated string as an index (associative array)
Munin::Node::Configure::History(3): Filtering plugins based on the version of Munin they were first distributed with
Queue(3o): First-in first-out queues
SDLmm_todo(3), todo(3): Todo List "Class SDLmm::SRect " 1c Extend the class with useful utility functions in regards to rectangles like intersections. "Class SDLmm::Surface " 1c Implement a better constructor scheme, where the first argument is a dummy class which specified what to do. This would allow a construct where a surface can be loaded from an image file without first having to create an unitialized object. "Class SDLmm::VideoInfo " 1c Build a status function allowing for easier access to the flags. This can be done using a bitfield which would allow for checking for multiple features at once
Stack(3o): Last-in first-out stacks
Sympa::Spindle::TransformIncoming(3Sympa): Process to transform messages - first stage
Tcl_Char16ToUtfDString.tcl87(3), Tcl_UniChar(3), Tcl_UniCharToUtf(3), Tcl_UtfToUniChar(3), Tcl_UtfToChar16(3), Tcl_UtfToWChar(3), Tcl_UniCharToUtfDString(3), Tcl_UtfToUniCharDString(3), Tcl_Char16ToUtfDString(3), Tcl_UtfToWCharDString(3), Tcl_UtfToChar16DString(3), Tcl_UniCharLen(3), Tcl_UniCharNcmp(3), Tcl_UniCharNcasecmp(3), Tcl_UniCharCaseMatch(3), Tcl_UtfNcmp(3), Tcl_UtfNcasecmp(3), Tcl_UtfCharComplete(3), Tcl_NumUtfChars(3), Tcl_UtfFindFirst(3), Tcl_UtfFindLast(3), Tcl_UtfNext(3), Tcl_UtfPrev(3), Tcl_UniCharAtIndex(3), Tcl_UtfAtIndex(3), Tcl_UtfBackslash(3): routines for manipulating UTF-8 strings
Tcl_CreateHashEntry.tcl85(3), Tcl_InitHashTable(3), Tcl_InitCustomHashTable(3), Tcl_InitObjHashTable(3), Tcl_DeleteHashTable(3), Tcl_CreateHashEntry(3), Tcl_DeleteHashEntry(3), Tcl_FindHashEntry(3), Tcl_GetHashValue(3), Tcl_SetHashValue(3), Tcl_GetHashKey(3), Tcl_FirstHashEntry(3), Tcl_NextHashEntry(3), Tcl_HashStats(3): procedures to manage hash tables
Tcl_CreateHashEntry.tcl86(3), Tcl_InitHashTable(3), Tcl_InitCustomHashTable(3), Tcl_InitObjHashTable(3), Tcl_DeleteHashTable(3), Tcl_CreateHashEntry(3), Tcl_DeleteHashEntry(3), Tcl_FindHashEntry(3), Tcl_GetHashValue(3), Tcl_SetHashValue(3), Tcl_GetHashKey(3), Tcl_FirstHashEntry(3), Tcl_NextHashEntry(3), Tcl_HashStats(3): procedures to manage hash tables
Tcl_CreateHashEntry.tcl87(3), Tcl_InitHashTable(3), Tcl_InitCustomHashTable(3), Tcl_InitObjHashTable(3), Tcl_DeleteHashTable(3), Tcl_CreateHashEntry(3), Tcl_DeleteHashEntry(3), Tcl_FindHashEntry(3), Tcl_GetHashValue(3), Tcl_SetHashValue(3), Tcl_GetHashKey(3), Tcl_FirstHashEntry(3), Tcl_NextHashEntry(3), Tcl_HashStats(3): procedures to manage hash tables
Tcl_DictObjDone.tcl85(3), Tcl_NewDictObj(3), Tcl_DictObjPut(3), Tcl_DictObjGet(3), Tcl_DictObjRemove(3), Tcl_DictObjSize(3), Tcl_DictObjFirst(3), Tcl_DictObjNext(3), Tcl_DictObjDone(3), Tcl_DictObjPutKeyList(3), Tcl_DictObjRemoveKeyList(3): manipulate Tcl objects as dictionaries
Tcl_DictObjDone.tcl86(3), Tcl_NewDictObj(3), Tcl_DictObjPut(3), Tcl_DictObjGet(3), Tcl_DictObjRemove(3), Tcl_DictObjSize(3), Tcl_DictObjFirst(3), Tcl_DictObjNext(3), Tcl_DictObjDone(3), Tcl_DictObjPutKeyList(3), Tcl_DictObjRemoveKeyList(3): manipulate Tcl values as dictionaries
Tcl_DictObjDone.tcl87(3), Tcl_NewDictObj(3), Tcl_DictObjPut(3), Tcl_DictObjGet(3), Tcl_DictObjRemove(3), Tcl_DictObjSize(3), Tcl_DictObjFirst(3), Tcl_DictObjNext(3), Tcl_DictObjDone(3), Tcl_DictObjPutKeyList(3), Tcl_DictObjRemoveKeyList(3): manipulate Tcl values as dictionaries
Tcl_NumUtfChars.tcl85(3), Tcl_UniChar(3), Tcl_UniCharToUtf(3), Tcl_UtfToUniChar(3), Tcl_UniCharToUtfDString(3), Tcl_UtfToUniCharDString(3), Tcl_UniCharLen(3), Tcl_UniCharNcmp(3), Tcl_UniCharNcasecmp(3), Tcl_UniCharCaseMatch(3), Tcl_UtfNcmp(3), Tcl_UtfNcasecmp(3), Tcl_UtfCharComplete(3), Tcl_NumUtfChars(3), Tcl_UtfFindFirst(3), Tcl_UtfFindLast(3), Tcl_UtfNext(3), Tcl_UtfPrev(3), Tcl_UniCharAtIndex(3), Tcl_UtfAtIndex(3), Tcl_UtfBackslash(3): routines for manipulating UTF-8 strings
Tcl_NumUtfChars.tcl86(3), Tcl_UniChar(3), Tcl_UniCharToUtf(3), Tcl_UtfToUniChar(3), Tcl_UniCharToUtfDString(3), Tcl_UtfToUniCharDString(3), Tcl_UniCharLen(3), Tcl_UniCharNcmp(3), Tcl_UniCharNcasecmp(3), Tcl_UniCharCaseMatch(3), Tcl_UtfNcmp(3), Tcl_UtfNcasecmp(3), Tcl_UtfCharComplete(3), Tcl_NumUtfChars(3), Tcl_UtfFindFirst(3), Tcl_UtfFindLast(3), Tcl_UtfNext(3), Tcl_UtfPrev(3), Tcl_UniCharAtIndex(3), Tcl_UtfAtIndex(3), Tcl_UtfBackslash(3): routines for manipulating UTF-8 strings
XmListSetItem(3): A List function that makes an existing item the first visible item in the list "XmListSetItem" "List functions" "XmListSetItem"
XmListSetPos(3): A List function that makes the item at the given position the first visible position in the list "XmListSetPos" "List functions" "XmListSetPos"
XmMainWindowSep1(3): A MainWindow function that returns the widget ID of the first Separator "XmMainWindowSep1" "MainWindow functions" "XmMainWindowSep1"
XmStringBaseline(3): A compound string function that returns the number of pixels between the top of the character box and the baseline of the first line of text "XmStringBaseline" "compound string functions" "XmStringBaseline"
XmTextGetTopCharacter(3): A Text function that accesses the position of the first character displayed "XmTextGetTopCharacter" "Text functions" "XmTextGetTopCharacter"
XmTextSetTopCharacter(3): A Text function that sets the position of the first character displayed "XmTextSetTopCharacter" "Text functions" "XmTextSetTopCharacter"
addbddvarfirst(3): adds a new variable, before all others. man1/alc_origin.1
al_ffblk_get_size(3): Get size of file returned by al_findfirst/al_findnext. Allegro game programming library
al_findclose(3): Closes a previously opened search with al_findfirst(). Allegro game programming library
al_findfirst(3): Low-level function for searching files. Allegro game programming library
al_findnext(3): Finds the next file in a search started by al_findfirst(). Allegro game programming library
al_get_first_config_entry(3): Allegro 5 API
al_get_first_config_section(3): Allegro 5 API
ber_get_next(3), ber_skip_tag(3), ber_peek_tag(3), ber_scanf(3), ber_get_int(3), ber_get_enum(3), ber_get_stringb(3), ber_get_stringa(3), ber_get_stringal(3), ber_get_stringbv(3), ber_get_null(3), ber_get_boolean(3), ber_get_bitstring(3), ber_first_element(3), ber_next_element(3): OpenLDAP LBER simplified Basic Encoding Rules library routines for decoding
callback(3): closures with variable arguments as first-class C functions
cdk_traverse(3), exitCancelCDKScreen exitCancelCDKScreenOf exitOKCDKScreen exitOKCDKScreenOf getCDKFocusCurrent resetCDKScreen resetCDKScreenOf setCDKFocusCurrent setCDKFocusFirst setCDKFocusLast setCDKFocusNext setCDKFocusPrevious traverseCDKOnce traverseCDKScreen cdk_traverse(3): functions to support keyboard traversal
ck_queue(3), CK_LIST_EMPTY(3), CK_LIST_ENTRY(3), CK_LIST_FIRST(3), CK_LIST_FOREACH(3), CK_LIST_FOREACH_SAFE(3), CK_LIST_HEAD(3), CK_LIST_HEAD_INITIALIZER(3), CK_LIST_INIT(3), CK_LIST_INSERT_AFTER(3), CK_LIST_INSERT_BEFORE(3), CK_LIST_INSERT_HEAD(3), CK_LIST_MOVE(3), CK_LIST_NEXT(3), CK_LIST_REMOVE(3), CK_LIST_SWAP(3), CK_SLIST_EMPTY(3), CK_SLIST_ENTRY(3), CK_SLIST_FIRST(3), CK_SLIST_FOREACH(3), CK_SLIST_FOREACH_PREVPTR(3), CK_SLIST_FOREACH_SAFE(3), CK_SLIST_HEAD(3), CK_SLIST_HEAD_INITIALIZER(3), CK_SLIST_INIT(3), CK_SLIST_INSERT_AFTER(3), CK_SLIST_INSERT_HEAD(3), CK_SLIST_MOVE(3), CK_SLIST_NEXT(3), CK_SLIST_REMOVE(3), CK_SLIST_REMOVE_AFTER(3), CK_SLIST_REMOVE_HEAD(3), CK_SLIST_SWAP(3), CK_STAILQ_CONCAT(3), CK_STAILQ_EMPTY(3), CK_STAILQ_ENTRY(3), CK_STAILQ_FIRST(3), CK_STAILQ_FOREACH(3), CK_STAILQ_FOREACH_SAFE(3), CK_STAILQ_HEAD(3), CK_STAILQ_HEAD_INITIALIZER(3), CK_STAILQ_INIT(3), CK_STAILQ_INSERT_AFTER(3), CK_STAILQ_INSERT_HEAD(3), CK_STAILQ_INSERT_TAIL(3), CK_STAILQ_MOVE(3), CK_STAILQ_NEXT(3), CK_STAILQ_REMOVE(3), CK_STAILQ_REMOVE_AFTER(3), CK_STAILQ_REMOVE_HEAD(3), CK_STAILQ_SWAP(3): multi-reader single-writer singly-linked lists, singly-linked tail queues and lists
cxGetFirstFile(3): Returns the first file in the directory
cxGetFirstModule(3): Returns the first module in the list
cxGetFirstSubDir(3): Returns the first subdirectory in the directory
cxGetFsIterFirst(3): Returns the first item
dateseq(1): Generate a sequence of date/times from FIRST to LAST, optionally in steps of
first(1): Yagi-Uda project quick antenna builder
first(5): output data file format The data files created by the Yagi-Uda projects first are in the same format as created by input and are described under input(5)
ghead(1), head(1): output the first part of files
hdf_get_child(3), hdf_get_child (3): return the first child of the named node
hdf_obj_child(3), hdf_obj_child (3): Return the first child of a dataset node
htable(3), HTABLE_HEAD(3): HTABLE_ENTRY, HTABLE_SIZE, HTABLE_COUNT, HTABLE_EMPTY, HTABLE_COLLS, HTABLE_LOAD, HTABLE_INITIALIZER, HTABLE_INIT, HTABLE_PROTOTYPE, HTABLE_GENERATE, HTABLE_INSERT, HTABLE_REMOVE, HTABLE_LOOKUP, HTABLE_FIRST, HTABLE_NEXT, HTABLE_FOREACH, implementation of hash tables
ideviceinfo(1): Show information about the first connected device
krb5_principal_intro(3): The principal handing functions. A Kerberos principal is a email address looking string that contains two parts separated by . The second part is the kerberos realm the principal belongs to and the first is a list of 0 or more components. For example lha@SU.SE host/hummel.it.su.se@SU.SE host/admin@H5L.ORG See the library functions here: Heimdal Kerberos 5 principal functions
ldap_first_attribute(3), ldap_next_attribute(3): step through LDAP entry attributes
ldap_first_entry(3), ldap_next_entry(3), ldap_count_entries(3): LDAP result entry parsing and counting routines
ldap_first_message(3), ldap_next_message(3), ldap_count_messages(3): Stepping through messages in a result chain
ldap_first_reference(3), ldap_next_reference(3), ldap_count_references(3): Stepping through continuation references in a result chain
libowfat_array_start(3), array_start(3): get pointer to first element in array
libowfat_cdb_firstkey(3), cdb_firstkey(3): find first physical record in constant database
lmdbg-head(1): display first stacktraces
memarrfill(3): fill an array with the value of its first element
mifare_classic_connect(3), mifare_classic_disconnect(3), mifare_classic_authenticate(3), mifare_classic_read(3), mifare_classic_init_value(3), mifare_classic_read_value(3), mifare_classic_write(3), mifare_classic_increment(3), mifare_classic_decrement(3), mifare_classic_restore(3), mifare_classic_transfer(3), mifare_classic_get_trailer_block_permission(3), mifare_classic_get_data_block_permission(3), mifare_classic_format_sector(3), mifare_classic_trailer_block(3), mifare_classic_block_sector(3), mifare_classic_sector_first_block(3), mifare_classic_sector_block_count(3), mifare_classic_sector_last_block(3): Mifare Classic Manipulation Functions
mplist_key(3m17n): Return the key of the first property in a property list
mplist_set(3m17n): Set the first property in a property list
mplist_value(3m17n): Return the value of the first property in a property list
mpqc(1): The Massively Parallel Quantum Chemistry program (MPQC) computes the properties of molecules from first principles. This documentation is divided into the following chapters: "o" 2 MPQC Overview "o" 2 Running MPQC "o" 2 MPQC Input "o" 2 Validating MPQC "o" 2 Running Psi 3 from MPQC "o" 2 CCA Components "o" 2 MPQC License "o" 2 MPQC Warranty
mtext_chr(3m17n): Return the position of the first occurrence of a character in an M-text
mtext_ncpy(3m17n): Copy the first some characters in an M-text to another
ne_addr_resolve(3), ne_addr_result(3), ne_addr_first(3), ne_addr_next(3), ne_addr_error(3), ne_addr_destroy(3): functions to resolve hostnames to addresses
nfc-barcode(1): NFC Barcode (Tag-Talks-First) reader
nfc-poll(1): poll first available NFC target
oneshot(1): A single-fire first-come-first-serve HTTP server
panda_fitwindow(3): ask the viewer to fit the viewer window to the first page of the PDF document when it is opened
paperinfo(3), paperwithsize(3), paperfirst(3), paperlast(3), papernext(3), paperprev(3): return informations about a paper
pmemobj_first(3), pmemobj_first()(3), pmemobj_next()(3), POBJ_FIRST()(3), POBJ_FIRST_TYPE_NUM()(3), POBJ_NEXT()(3), POBJ_NEXT_TYPE_NUM()(3), POBJ_FOREACH()(3), POBJ_FOREACH_SAFE()(3), POBJ_FOREACH_TYPE()(3), POBJ_FOREACH_SAFE_TYPE()(3): pmemobj container operations
pobj_list_head(3), POBJ_LIST_HEAD()(3), POBJ_LIST_ENTRY()(3), POBJ_LIST_FIRST()(3), POBJ_LIST_LAST()(3), POBJ_LIST_EMPTY()(3), POBJ_LIST_NEXT()(3), POBJ_LIST_PREV()(3), POBJ_LIST_FOREACH()(3), POBJ_LIST_FOREACH_REVERSE()(3), POBJ_LIST_INSERT_HEAD()(3), POBJ_LIST_INSERT_TAIL()(3), POBJ_LIST_INSERT_AFTER()(3), POBJ_LIST_INSERT_BEFORE()(3), POBJ_LIST_INSERT_NEW_HEAD()(3), POBJ_LIST_INSERT_NEW_TAIL()(3), POBJ_LIST_INSERT_NEW_AFTER()(3), POBJ_LIST_INSERT_NEW_BEFORE()(3), POBJ_LIST_REMOVE()(3), POBJ_LIST_REMOVE_FREE()(3), POBJ_LIST_MOVE_ELEMENT_HEAD()(3), POBJ_LIST_MOVE_ELEMENT_TAIL()(3), POBJ_LIST_MOVE_ELEMENT_AFTER()(3), POBJ_LIST_MOVE_ELEMENT_BEFORE()(3): type-safe non-transactional persistent atomic lists
rrdfirst(1): Return the date of the first data sample in an RRA within an RRD
samechflags(1): change file flags samechmod change file modes samechown change file owner and group samecp copies the first file of a pair of duplicate files samedelay delays line output until the files are no longer in use sameln links duplicate files together samemv moves the first file of a pair of duplicate files samerm remove the last of a pair of duplicate files
sc_bdrmap(1): scamper driver to map first hop border routers of networks
sc_canonical_aabb(3), sc::canonical_aabb(3): If the shell loop structure has 2 fold symmetry between the first two indices and a 2 fold symmetry between the last two indices, then this should be used as the template argument to GPetite4
sc_canonical_aabc(3), sc::canonical_aabc(3): If the shell loop structure has 2 fold symmetry between the first two indices, then this should be used as the template argument to GPetite4
smi_attribute(3), smiGetAttribute(3), smiGetFirstAttribute(3), smiGetNextAttribute(3), smiGetAttributeParentClass(3), smiGetAttributeParentType(3), smiGetFirstUniqueAttribute(3), smiGetNextUniqueAttribute(3), smiGetEvent(3), smiGetFirstEvent(3), smiGetNextEvent(3), smiGetAttributeFirstRange(3), smiGetAttributeNextRange(3), smiGetAttributeFirstNamedNumber(3), smiGetAttributeNextNamedNumber(3): SMI Attribute information routines
smi_class(3), smiGetClass smiGetFirstClass(3), smiGetNextClass(3), smiGetClassModule(3), smiGetParentClass(3), smiIsClassScalar(3): SMI class information routines
smi_event(3), smiGetEvent(3), smiGetFirstEvent(3), smiGetNextEvent(3): SMI identity information routines
smi_identity(3), smiGetIdentity(3), smiGetFirstIdentity(3), smiGetNextIdentity(3), smiGetParentIdentity(3), smiGetIdentityModule(3): SMI identity information routines
smi_macro(3), smiGetMacro(3), smiGetFirstMacro(3), smiGetNextMacro(3), smiGetMacroModule(3): SMI macro and extension information routines
smi_module(3), smiGetModule(3), smiGetFirstModule(3), smiGetNextModule(3), smiGetModuleIdentityNode(3), smiGetFirstImport(3), smiGetNextImport(3), smiIsImported(3), smiGetFirstRevision(3), smiGetNextRevision(3): SMI module information routines
smi_node(3), smiGetNode(3), smiGetNodeByOID(3), smiGetFirstNode(3), smiGetNextNode(3), smiGetParentNode(3), smiGetRelatedNode(3), smiGetFirstChildNode(3), smiGetNextChildNode(3), smiGetNodeModule(3), smiGetNodeType(3), smiGetNodeLine(3), smiGetFirstElement(3), smiGetNextElement(3), smiGetElementNode(3), smiGetFirstOption(3), smiGetNextOption(3), smiGetOptionNode(3), smiGetFirstRefinement(3), smiGetNextRefinement(3), smiGetRefinementModule(3), smiGetRefinementNode(3), smiGetRefinementType(3), smiGetRefinementWriteType(3): SMI type information routines
smi_type(3), smiGetType(3), smiGetFirstType(3), smiGetNextType(3), smiGetParentType(3), smiGetTypeLine(3), smiGetFirstRange(3), smiGetNextRange(3), smiGetFirstNamedNumber(3), smiGetNextNamedNumber(3), smiGetTypeModule(3): SMI type information routines
strdiff(3): locate first difference between two strings
strsub(3): substitute first occurence of pattern with another string
tpm2_commit(1), tpm2_commit(1)(1): Performs the first part of an ECC anonymous signing operation
tpm2_zgen2phase(1), tpm2_zgen2phase(1)(1): Command to enable the TPM to combine data from the other party with the ephemeral key generated in the first phase of two-phase key exchange protocols
trampoline(3): closures as first-class C functions
ustrchr(3): Finds the first occurrence of a character in a string. Allegro game programming library
ustrpbrk(3): Finds the first character that matches any in a set. Allegro game programming library
ustrstr(3): Finds the first occurrence of a string in another one. Allegro game programming library
vsetup(1): Sets up a virtual domain for its first use
xdiff(3), xdl_set_allocator(3), xdl_malloc(3), xdl_free(3), xdl_realloc(3), xdl_init_mmfile(3), xdl_free_mmfile(3), xdl_mmfile_iscompact(3), xdl_seek_mmfile(3), xdl_read_mmfile(3), xdl_write_mmfile(3), xdl_writem_mmfile(3), xdl_mmfile_writeallocate(3), xdl_mmfile_ptradd(3), xdl_mmfile_first(3), xdl_mmfile_next(3), xdl_mmfile_size(3), xdl_mmfile_cmp(3), xdl_mmfile_compact(3), xdl_diff(3), xdl_patch(3), xdl_merge3(3), xdl_bdiff_mb(3), xdl_bdiff(3), xdl_rabdiff_mb(3), xdl_rabdiff(3), xdl_bdiff_tgsize(3), xdl_bpatch(3): File Differential Library support functions
Acme::ButFirst(3): Do something, but first do something else
Algorithm::Evolutionary::Op::Crossover(3): n-point crossover operator; puts fragments of the second operand into the first operand
Alien::Build::Plugin::Prefer::SortVersions(3): Plugin to sort candidates by most recent first
Bio::Graphics::Util(3): non-object-oriented utilities used in Bio::Graphics modules "($frame,$offset) = frame_and_offset($pos,$strand,$phase)" 4 Item "($frame,$offset) = frame_and_offset($pos,$strand,$phase)" Calculate the reading frame for a given genomic position, strand and phase. The offset is the offset from $pos to the first nucleotide of the reading frame. In a scalar context, returns the frame only
BorderStyle::ASCII::SingleLineDoubleAfterHeader(3): Just like ASCII::SingleLine but uses double line to separate header row and first data row
BorderStyle::UTF8::SingleLineDoubleAfterHeader(3): Just like UTF8::SingleLine but uses double line to separate header row and first data row
CPAN::FirstTime(3): Utility for CPAN::Config file Initialization
Class::Autouse(3): Run-time load a class the first time you call a method in it
Coro::State(3): first class continuations
DBIx::Class::Helper::ResultSet::OneRow(3): The first you always wanted
DBIx::Class::Migration::Tutorial::FirstMigration(3): Prepare your first Migration
DBIx::Class::Schema::Loader::Optional::Dependencies(3), $class(3): Optional module dependency specifications (for module authors) EOC #@@ #@@ SYNOPSIS HEADING #@@ push @chunks, <<"EOC"; =head1 SYNOPSIS Somewhere in your build-file (e.g. ExtUtils::MakeMaker's Makefile.PL): ... e$EUMM_ARGS{CONFIGURE_REQUIRES} = { e%{ e$EUMM_ARGS{CONFIGURE_REQUIRES} || {} }, DBIx::Class::Schema::Loader => $distver, }; ... my %DBIC_CONFIG_AND_ORACLE_DEPS = %{ eval { require $class; $class->req_list_for([qw( dbicdump_config rdbms_oracle )]); } || {} }; e$EUMM_ARGS{PREREQ_PM} = { e%DBIC_CONFIG_AND_ORACLE_DEPS, e%{ e$EUMM_ARGS{PREREQ_PM} || {} }, }; ... ExtUtils::MakeMaker::WriteMakefile(e%EUMM_ARGS); Note: The eval protection within the example is due to support for requirements during the configure build phase not being available on a sufficient portion of production installations of Perl. Robust support for such dependency requirements is available in the CPAN installer only since version 1.94_56 first made available for production with perl version 5.12. It is the belief of the current maintainer that support for requirements during the configure build phase will not be sufficiently ubiquitous until the year 2020 at the earliest, hence the extra care demonstrated above. It should also be noted that some 3rd party installers (e.g. cpanminus) do the right thing with configure requirements independent from the versions of perl and CPAN available. EOC #@@ #@@ DESCRIPTION HEADING #@@ push @chunks, <<'EOC'; =head1 DESCRIPTION Some of the less-frequently used features of DBIx::Class::Schema::Loader have external module dependencies on their own. In order not to burden the average user with modules they will never use, these optional dependencies are not included in the base Makefile.PL. Instead an exception with a descriptive message is thrown when a specific feature can't find one or several modules required for its operation. This module is the central holding place for the current list of such dependencies, for DBIx::Class::Schema::Loader core authors, and DBIx::Class::Schema::Loader extension authors alike. Dependencies are organized in groups where each group can list one or more required modules, with an optional minimum version (or 0 for any version). In addition groups prefixed with test_ can specify a set of environment variables, some (or all) of which are marked as required for the group to be considered by req_list_for Each group name (or a combination thereof) can be used in the public methods as described below. EOC #@@ #@@ REQUIREMENT GROUPLIST HEADING #@@ push @chunks, '=head1 CURRENT REQUIREMENT GROUPS'; my $standalone_info; for my $group (sort keys %$dbic_reqs) { my $info = $standalone_info->{$group} ||= $class->_groups_to_reqs($group); next unless ( $info->{modreqs_fully_documented} and ( $info->{augments} or $info->{modreqs} ) ); my $p = $dbic_reqs->{$group}{pod}; push @chunks, ( "=head2 $p->{title}", "=head3 $group", $p->{desc}, =over, ); if ( keys %{ $info->{modreqs}||{} } ) { push @chunks, map { "=item * $_" . ($info->{modreqs}{$_} ? " >= $info->{modreqs}{$_}" : ) } ( sort keys %{ $info->{modreqs} } ) ; } else { push @chunks, =item * No standalone requirements, } push @chunks, =back; for my $ag ( sort keys %{ $info->{augments} || {} } ) { my $ag_info = $standalone_info->{$ag} ||= $class->_groups_to_reqs($ag); my $newreqs = $class->modreq_list_for([ $group, $ag ]); for (keys %$newreqs) { delete $newreqs->{$_} if ( ( defined $info->{modreqs}{$_} and $info->{modreqs}{$_} == $newreqs->{$_} ) or ( defined $ag_info->{modreqs}{$_} and $ag_info->{modreqs}{$_} == $newreqs->{$_} ) ); } if (keys %$newreqs) { push @chunks, ( "Combined with L</$ag> additionally requires:", =over, ( map { "=item * $_" . ($newreqs->{$_} ? " >= $newreqs->{$_}" : ) } ( sort keys %$newreqs ) ), =back, ); } } } #@@ #@@ API DOCUMENTATION HEADING #@@ push @chunks, <<'EOC';
DBIx::Class::Storage::DBI::Replicated::Balancer::First(3): Just get the First Balancer
DBM::Deep::Iterator(3): iterator for FIRSTKEY() and NEXTKEY()
Data::Unixish::head(3): Output the first items of data
Data::Unixish::lcfirst(3): Convert first character of text to lowercase
Data::Unixish::ucfirst(3): Convert first character of text to uppercase
Future::Phrasebook(3), "Future::Phrasebook"(3): coding examples for "Future" and "Future::Utils" This documentation-only module provides a phrasebook-like approach to giving examples on how to use Future and Future::Utils to structure Future-driven asynchronous or concurrent logic. As with any inter-dialect phrasebook it is structured into pairs of examples; each given first in a traditional call/return Perl style, and second in a style using Futures. In each case, the generic function or functions in the example are named in "ALL_CAPITALS()" to make them stand out. In the examples showing use of Futures, any function that is expected to return a "Future" instance is named with a leading "F_" prefix. Each example is also constructed so as to yield an overall future in a variable called "$f", which represents the entire operation
Gantry::Conf::FAQ(3): Frequently Asked Questions regarding Gantry::Conf "Why should I use Gantry::Conf at all?" 4 Item "Why should I use Gantry::Conf at all?" There are many reasons why we feel Gantry::Conf is helpful both during development and after deployment. The next two entries should hopefully answer this question for you as they outline a few common scenarios programmers and system administrators often face. "How is Gantry::Conf helpful during development?" 4 Item "How is Gantry::Conf helpful during development?" "Easy separation of development configs from production configs" 4 Item "Easy separation of development configs from production configs" Often programmers have a separate development environment from their production environment. By using <shared> blocks and dev instances you can avoid spending any serious time setting up your application in the development environment. Take this configuration example: <shared dev> dbuser nobody dbpass secret dbconn "dbi:Pg:dbname=dev" </shared> <shared production> dbuser apache dbpass secret2 dbconn "dbi:Pg:dbname=production" </shared> <instance app1> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use production </instance> <instance app1-dev> ConfigureVia FlatFile Config::General /etc/apps/app1.conf use dev </instance> By separating out our production and dev database information into shared blocks we can essentially switch between our production and dev environments by simply changing the instance we are using. If you were working on a script this would be a simple matter of running: $ script.pl --instance=app1-dev instead of: $ script.pl --instance=app1 "How is Gatnry::Conf helpful in production?" 4 Item "How is Gatnry::Conf helpful in production?" Gantry::Conf has several advantages in a production environment. First, it provides a single place for all config information, if you commit to it. Even if you don't commit to it for all apps, it still provides control to the installing admin over how and where conf information is stored. For instance, the admin could put the config information directly into /etc/gantry.conf, or into a separate file in /etc/gantry.d. She could even set up a secure web server where all boxes would go to get their conf. The short answer is, Gantry::Conf is flexible and production environments benefit from flexibility. "How do I pass my instance information into my application?" 4 Item "How do I pass my instance information into my application?" There are many possible ways to do this a few of which are: "Command line arguments" 4 Item "Command line arguments" If your application accepts arguments on the command line we suggest adding an --instance option to pass in the instance's name. "PerlSetVar" 4 Item "PerlSetVar" In a mod_perl environment you could use a PerlSetVar, possibly named GantryConfInstance, to pull in this value for your application. "ModPerl::ParamBuilder" 4 Item "ModPerl::ParamBuilder" Again in a mod_perl environment, another option would be to use ModPerl::ParamBuilder to pass the instance name. "Hard coded" 4 Item "Hard coded" We include this for the sake of completeness, but advise against it. You could always simply hard code your instance information into your application, but this will greatly reduce the flexibility you have. "How do I add a different provider for an existing ConfigVia method?" 4 Item "How do I add a different provider for an existing ConfigVia method?" Place your provider module in the Gantry::Conf::Provider::Method::* namespace. Make sure your public API matches the existing providers which use the same method. For instance the flat file providers all implement a config method which is called as a class method and receives a file name. "How do I add to the ConfigVia methods?" 4 Item "How do I add to the ConfigVia methods?" If none of the existing provider methods will do, you need to work in Gantry::Conf. In particular, you need to augment the dispatch hash with the name of your provisioning method and a sub name which will handle it. Then you need to implement the method you put in %dispatch
Gantry::Docs::QuickStart(3), Header "Name" Gantry::Docs::QuickStart(3): Getting your first Gantry app up and running
Graph::Traversal::BFS(3): breadth-first traversal of graphs
Graph::Traversal::DFS(3): depth-first traversal of graphs
JMX::Jmx4Perl::Agent::Jolokia::Verifier(3), JMX::Jmx4Perl::Agent::Verifier(3): Handler for various verifiers which picks the most secure one first
Jifty::Manual::Style(3): Jifty coding style guide Default style Subsection "Default style" When in doubt, default to whatever Damian Conway's Perl Best Practices says. Private documentation Subsection "Private documentation" When documenting a private method, or providing documentation which is not useful to the user of the module (and is presumably useful to the developer), wrap it in =begin/end private. This way it does not show up in perldoc where a user would see it and yet is still available and well formatted (that is, not just a lump comment) when looking at the code. =begin private =head2 import_extra Called by L<Test::More>s C<import> code when L<Jifty::Test> is first C<use>d, it calls L</setup>, and asks Test::More to export its symbols to the namespace that C<use>d this one. =end private sub import_extra { ... } Test temp files Subsection "Test temp files" Files created by tests should be declared as such using Jifty::Test->test_file() so they are cleaned up on a successful test run. Use Shell::Command Subsection "Use Shell::Command" Shell::Command has a number of functions which work like common shell file commands such as touch, cp and mv. They are battle tested and cross-platform. Use them instead of coding your own. For example, instead of this: open my $file, ">foo"; close $file; Do this: use Shell::Command; touch $file; Case insensitive matching Subsection "Case insensitive matching" To check if a string equals another string case insensitively, do this lc $foo eq lc $bar; lc $foo eq bar; not this: $foo =~ /^eQ$bareE/i; $foo =~ /^bar$/i;
MR::Tarantool::Box::Singleton(3): A singleton wrapper for MR::Tarantool::Box. Provides connection-persistence and replica fallback. Please read "MR::Tarantool::Box manual" first
Net::Packet::OSPF(3): Open Shortest Path First layer 4 object
Perl::Critic::Policy::Subroutines::RequireArgUnpacking(3): Always unpack "@_" first
Plagger::Plugin::Summary::TextOriginal(3): uses Text::Original to get first sentence
SOAP::WSDL::Manual::CodeFirst(3), CodeFirst(3): Writing Code-First Web Services with SOAP::WSDL Note: This document is just a collection of thought. There's no implementation yet
Sort::Array(3): This extended sorting algorithm allows you to a) sort an array by ANY field number, not only the first. b) find duplicates in your data-set and sort them out. The function is case-sensitive. Future versions might come without this limitation
Sort::Sub::by_first_num_in_text(3): Sort by first number found in text or (if no number is found) ascibetically
Sort::Sub::by_num_in_text(3): Sort by first number found in text or (if no number is found) ascibetically
Spreadsheet::ParseODS::Workbook(3): a workbook n .SS """->filename""" .SS "->filename" Subsection "->filename" print $workbook->filename; The name of the file if applicable. n .SS """->table_styles""" .SS "->table_styles" Subsection "->table_styles" The styles that identify whether a table is hidden, and other styles n .SS """->get_print_areas()""" .SS "->get_print_areas()" Subsection "->get_print_areas()" my $print_areas = $workbook->get_print_areas(); # [[ [$start_row, $start_col, $end_row, $end_col], ... ]] The ->get_print_areas() method returns the print areas of each sheet as an arrayref of arrayrefs. If a sheet has no print area, undef is returned for its print area. n .SS """->get_active_sheet()""" .SS "->get_active_sheet()" Subsection "->get_active_sheet()" my $sheet = $workbook->get_active_sheet(); if( !$sheet ) { # If there is no defined active worksheet, take the first: ($sheet) = $workbook->worksheets(); }; Returns the active worksheet, or if there is no such sheet, returns undef. n .SS """->worksheets()""" .SS "->worksheets()" Subsection "->worksheets()" my @sheets = $workbook->worksheets; Returns the list of worksheets as Spreadsheet::ParseODS::Worksheet objects. n .SS """->worksheet($name)""" .SS "->worksheet($name)" Subsection "->worksheet($name)" my $sheet1 = $workbook->worksheet(Sheet 1); Returns the worksheet with the given name, or if no such worksheet exists, returns undef
Sub::Defer(3): Defer generation of subroutines until they are first called
Test2::Manual::Tooling::FirstTool(3): Write your first tool with Test2
Test2::Plugin::BailOnFail(3): Automatically bail out of testing on the first test failure
Test2::Plugin::DieOnFail(3): Automatically die on the first test failure
Test::ClassAPI(3): Provides basic first-pass API testing for large class trees
Text::Pipe::List::First(3): Common text filter API
Text::Pipe::LowercaseFirst(3): Common text filter API
Text::Pipe::UppercaseFirst(3): Common text filter API
Tree::Binary::Visitor::BreadthFirstTraversal(3): Visitor object for Tree::Binary objects
Tree::Simple::Visitor::BreadthFirstTraversal(3): A Visitor for breadth-first traversal a Tree::Simple hierarchy
TryCatch(3): first class try catch semantics for Perl, without source filters
bfs(1): breadth-first search for your files
certbot(1): certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account show_account Display account details --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications options: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA. When used in combination with the (ga-v(ga option, the challenge URLs or FQDNs and their expected return values are shown. (default: False) --preferred-chain PREFERRED_CHAIN Set the preferred certificate chain. If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --issuance-timeout ISSUANCE_TIMEOUT This option specifies how long (in seconds) Certbot will wait for the server to issue a certificate. (default: 90) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/2.0.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --no-reuse-key When renewing, do not use the same private key as the existing certificate. Not reusing private keys is the default behavior of Certbot. This option may be used to unset --reuse-key on an existing certificate. (default: False) --new-key When renewing or replacing a certificate, generate a new private key, even if --reuse-key is set on the existing certificate. Combining --new-key and --reuse- key will result in the private key being replaced and then reused in future renewals. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key. Only *ONE* per invocation can be provided at this time. (default: ecdsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must-Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. The root certificates trusted by Certbot can be overriden by setting the REQUESTS_CA_BUNDLE environment variable. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew any certificates previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the plugins and options used to obtain or most recently renew each certificate. You can test whether future renewals will succeed with (ga--dry-run(ga. Individual certificates can be renewed with the (ga--cert-name(ga option. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com") (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: False) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. show_account: Options useful for the "show_account" subcommand: plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
dthelp_ctag1(1): first pass for formal SGML parse of HelpTag source
dthelp_htag1(1): first pass for loose (shorthand) parse of HelpTag source

kitty.conf(5): kitty.conf Documentation kitty is highly customizable, everything from keyboard shortcuts, to rendering frames-per-second. See below for an overview of all customization possibilities. You can open the config file within kitty by pressing %ctrl+shift+f2 (⌘+, on macOS). A kitty.conf with commented default configurations and descriptions will be created if the file does not exist. You can reload the config file within kitty by pressing %ctrl+shift+f5 (⌃+⌘+, on macOS) or sending kitty the SIGUSR1 signal. You can also display the current configuration by pressing %ctrl+shift+f6 (⌥+⌘+, on macOS). kitty looks for a config file in the OS config directories (usually ~/.config/kitty/kitty.conf) but you can pass a specific path via the %kitty --config option or use the %KITTY_CONFIG_DIRECTORY environment variable. See %kitty --config for full details. Comments can be added to the config file as lines starting with the # character. This works only if the # character is the first character in the line. You can include secondary config files via the include directive. If you use a relative path for include, it is resolved with respect to the location of the current config file. Note that environment variables are expanded, so ${USER}.conf becomes name.conf if USER=name. Also, you can use globinclude to include files matching a shell glob pattern and envinclude to include configuration from environment variables. For example: 0.0 3.5 C include other.conf # Include *.conf files from all subdirs of kitty.d inside the kitty config dir globinclude kitty.d/**/*.conf # Include the *contents* of all env vars starting with KITTY_CONF_ envinclude KITTY_CONF_* P NOTE: 0.0 3.5 Syntax highlighting for kitty.conf in vim is available via %vim-kitty. kitty has very powerful font management. You can configure individual font faces and even specify special fonts for particular characters. 0.0 font_family, bold_font, italic_font, bold_italic_font 0.0 3.5 C font_family monospace bold_font auto italic_font auto bold_italic_font auto P You can specify different fonts for the bold/italic/bold-italic variants. To get a full list of supported fonts use the kitty +list-fonts command. By default they are derived automatically, by the OSes font system. When %bold_font or %bold_italic_font is set to auto on macOS, the priority of bold fonts is semi-bold, bold, heavy. Setting them manually is useful for font families that have many weight variants like Book, Medium, Thick, etc. For example: 0.0 3.5 C font_family Operator Mono Book bold_font Operator Mono Medium italic_font Operator Mono Book Italic bold_italic_font Operator Mono Medium Italic P 0.0 font_size 0.0 3.5 C font_size 11.0 P Font size (in pts) 0.0 force_ltr 0.0 3.5 C force_ltr no P kitty does not support BIDI (bidirectional text), however, for RTL scripts, words are automatically displayed in RTL. That is to say, in an RTL script, the words (dqHELLO WORLD(dq display in kitty as (dqWORLD HELLO(dq, and if you try to select a substring of an RTL-shaped string, you will get the character that would be there had the the string been LTR. For example, assuming the Hebrew word ירושלים, selecting the character that on the screen appears to be ם actually writes into the selection buffer the character י. kitty(aqs default behavior is useful in conjunction with a filter to reverse the word order, however, if you wish to manipulate RTL glyphs, it can be very challenging to work with, so this option is provided to turn it off. Furthermore, this option can be used with the command line program %GNU FriBidi to get BIDI support, because it will force kitty to always treat the text as LTR, which FriBidi expects for terminals. 0.0 symbol_map 0.0 3.5 C symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols P Map the specified Unicode codepoints to a particular font. Useful if you need special rendering for some symbols, such as for Powerline. Avoids the need for patched fonts. Each Unicode code point is specified in the form U+<code point in hexadecimal>. You can specify multiple code points, separated by commas and ranges separated by hyphens. This option can be specified multiple times. The syntax is: 0.0 3.5 C symbol_map codepoints Font Family Name P 0.0 narrow_symbols 0.0 3.5 C narrow_symbols U+E0A0-U+E0A3,U+E0C0-U+E0C7 1 P Usually, for Private Use Unicode characters and some symbol/dingbat characters, if the character is followed by one or more spaces, kitty will use those extra cells to render the character larger, if the character in the font has a wide aspect ratio. Using this option you can force kitty to restrict the specified code points to render in the specified number of cells (defaulting to one cell). This option can be specified multiple times. The syntax is: 0.0 3.5 C narrow_symbols codepoints [optionally the number of cells] P 0.0 disable_ligatures 0.0 3.5 C disable_ligatures never P Choose how you want to handle multi-character ligatures. The default is to always render them. You can tell kitty to not render them when the cursor is over them by using cursor to make editing easier, or have kitty never render them at all by using always, if you don(aqt like them. The ligature strategy can be set per-window either using the kitty remote control facility or by defining shortcuts for it in kitty.conf, for example: 0.0 3.5 C map alt+1 disable_ligatures_in active always map alt+2 disable_ligatures_in all never map alt+3 disable_ligatures_in tab cursor P Note that this refers to programming ligatures, typically implemented using the calt OpenType feature. For disabling general ligatures, use the %font_features option. 0.0 font_features 0.0 3.5 C font_features none P Choose exactly which OpenType features to enable or disable. This is useful as some fonts might have features worthwhile in a terminal. For example, Fira Code includes a discretionary feature, zero, which in that font changes the appearance of the zero (0), to make it more easily distinguishable from Ø. Fira Code also includes other discretionary features known as Stylistic Sets which have the tags ss01 through ss20. For the exact syntax to use for individual features, see the %HarfBuzz documentation. Note that this code is indexed by PostScript name, and not the font family. This allows you to define very precise feature settings; e.g. you can disable a feature in the italic font but not in the regular font. On Linux, font features are first read from the FontConfig database and then this option is applied, so they can be configured in a single, central place. To get the PostScript name for a font, use kitty +list-fonts --psnames: 0.0 3.5 C $ kitty +list-fonts --psnames | grep Fira Fira Code Fira Code Bold (FiraCode-Bold) Fira Code Light (FiraCode-Light) Fira Code Medium (FiraCode-Medium) Fira Code Regular (FiraCode-Regular) Fira Code Retina (FiraCode-Retina) P The part in brackets is the PostScript name. Enable alternate zero and oldstyle numerals: 0.0 3.5 C font_features FiraCode-Retina +zero +onum P Enable only alternate zero in the bold font: 0.0 3.5 C font_features FiraCode-Bold +zero P Disable the normal ligatures, but keep the calt feature which (in this font) breaks up monotony: 0.0 3.5 C font_features TT2020StyleB-Regular -liga +calt P In conjunction with %force_ltr, you may want to disable Arabic shaping entirely, and only look at their isolated forms if they show up in a document. You can do this with e.g.: 0.0 3.5 C font_features UnifontMedium +isol -medi -fina -init P 0.0 modify_font 0.0 3.5 C modify_font P Modify font characteristics such as the position or thickness of the underline and strikethrough. The modifications can have the suffix px for pixels or % for percentage of original value. No suffix means use pts. For example: 0.0 3.5 C modify_font underline_position -2 modify_font underline_thickness 150% modify_font strikethrough_position 2px P Additionally, you can modify the size of the cell in which each font glyph is rendered and the baseline at which the glyph is placed in the cell. For example: 0.0 3.5 C modify_font cell_width 80% modify_font cell_height -2px modify_font baseline 3 P Note that modifying the baseline will automatically adjust the underline and strikethrough positions by the same amount. Increasing the baseline raises glyphs inside the cell and decreasing it lowers them. Decreasing the cell size might cause rendering artifacts, so use with care. 0.0 box_drawing_scale 0.0 3.5 C box_drawing_scale 0.001, 1, 1.5, 2 P The sizes of the lines used for the box drawing Unicode characters. These values are in pts. They will be scaled by the monitor DPI to arrive at a pixel value. There must be four values corresponding to thin, normal, thick, and very thick lines. 0.0 cursor 0.0 3.5 C cursor #cccccc P Default cursor color. If set to the special value none the cursor will be rendered with a (dqreverse video(dq effect. It(aqs color will be the color of the text in the cell it is over and the text will be rendered with the background color of the cell. Note that if the program running in the terminal sets a cursor color, this takes precedence. Also, the cursor colors are modified if the cell background and foreground colors have very low contrast. 0.0 cursor_text_color 0.0 3.5 C cursor_text_color #111111 P The color of text under the cursor. If you want it rendered with the background color of the cell underneath instead, use the special keyword: background. Note that if %cursor is set to none then this option is ignored. 0.0 cursor_shape 0.0 3.5 C cursor_shape block P The cursor shape can be one of block, beam, underline. Note that when reloading the config this will be changed only if the cursor shape has not been set by the program running in the terminal. This sets the default cursor shape, applications running in the terminal can override it. In particular, %shell integration in kitty sets the cursor shape to beam at shell prompts. You can avoid this by setting %shell_integration to no-cursor. 0.0 cursor_beam_thickness 0.0 3.5 C cursor_beam_thickness 1.5 P The thickness of the beam cursor (in pts). 0.0 cursor_underline_thickness 0.0 3.5 C cursor_underline_thickness 2.0 P The thickness of the underline cursor (in pts). 0.0 cursor_blink_interval 0.0 3.5 C cursor_blink_interval -1 P The interval to blink the cursor (in seconds). Set to zero to disable blinking. Negative values mean use system default. Note that the minimum interval will be limited to %repaint_delay. 0.0 cursor_stop_blinking_after 0.0 3.5 C cursor_stop_blinking_after 15.0 P Stop blinking cursor after the specified number of seconds of keyboard inactivity. Set to zero to never stop blinking. 0.0 scrollback_lines 0.0 3.5 C scrollback_lines 2000 P Number of lines of history to keep in memory for scrolling back. Memory is allocated on demand. Negative numbers are (effectively) infinite scrollback. Note that using very large scrollback is not recommended as it can slow down performance of the terminal and also use large amounts of RAM. Instead, consider using %scrollback_pager_history_size. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_pager 0.0 3.5 C scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER P Program with which to view scrollback in a new window. The scrollback buffer is passed as STDIN to this program. If you change it, make sure the program you use can handle ANSI escape sequences for colors and text formatting. INPUT_LINE_NUMBER in the command line above will be replaced by an integer representing which line should be at the top of the screen. Similarly CURSOR_LINE and CURSOR_COLUMN will be replaced by the current cursor position or set to 0 if there is no cursor, for example, when showing the last command output. 0.0 scrollback_pager_history_size 0.0 3.5 C scrollback_pager_history_size 0 P Separate scrollback history size (in MB), used only for browsing the scrollback buffer with pager. This separate buffer is not available for interactive scrolling but will be piped to the pager program when viewing scrollback buffer in a separate window. The current implementation stores the data in UTF-8, so approximatively 10000 lines per megabyte at 100 chars per line, for pure ASCII, unformatted text. A value of zero or less disables this feature. The maximum allowed size is 4GB. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_fill_enlarged_window 0.0 3.5 C scrollback_fill_enlarged_window no P Fill new space with lines from the scrollback buffer after enlarging a window. 0.0 wheel_scroll_multiplier 0.0 3.5 C wheel_scroll_multiplier 5.0 P Multiplier for the number of lines scrolled by the mouse wheel. Note that this is only used for low precision scrolling devices, not for high precision scrolling devices on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. See also %wheel_scroll_min_lines. 0.0 wheel_scroll_min_lines 0.0 3.5 C wheel_scroll_min_lines 1 P The minimum number of lines scrolled by the mouse wheel. The %scroll multiplier only takes effect after it reaches this number. Note that this is only used for low precision scrolling devices like wheel mice that scroll by very small amounts when using the wheel. With a negative number, the minimum number of lines will always be added. 0.0 touch_scroll_multiplier 0.0 3.5 C touch_scroll_multiplier 1.0 P Multiplier for the number of lines scrolled by a touchpad. Note that this is only used for high precision scrolling devices on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 mouse_hide_wait 0.0 3.5 C mouse_hide_wait 3.0 P Hide mouse cursor after the specified number of seconds of the mouse not being used. Set to zero to disable mouse cursor hiding. Set to a negative value to hide the mouse cursor immediately when typing text. Disabled by default on macOS as getting it to work robustly with the ever-changing sea of bugs that is Cocoa is too much effort. 0.0 url_color, url_style 0.0 3.5 C url_color #0087bd url_style curly P The color and style for highlighting URLs on mouse-over. %url_style can be one of: none, straight, double, curly, dotted, dashed. 0.0 open_url_with 0.0 3.5 C open_url_with default P The program to open clicked URLs. The special value default with first look for any URL handlers defined via the %Scripting the mouse click facility and if non are found, it will use the Operating System(aqs default URL handler (open on macOS and xdg-open on Linux). 0.0 url_prefixes 0.0 3.5 C url_prefixes file ftp ftps gemini git gopher http https irc ircs kitty mailto news sftp ssh P The set of URL prefixes to look for when detecting a URL under the mouse cursor. 0.0 detect_urls 0.0 3.5 C detect_urls yes P Detect URLs under the mouse. Detected URLs are highlighted with an underline and the mouse cursor becomes a hand over them. Even if this option is disabled, URLs are still clickable. 0.0 url_excluded_characters 0.0 3.5 C url_excluded_characters P Additional characters to be disallowed from URLs, when detecting URLs under the mouse cursor. By default, all characters that are legal in URLs are allowed. 0.0 copy_on_select 0.0 3.5 C copy_on_select no P Copy to clipboard or a private buffer on select. With this set to clipboard, selecting text with the mouse will cause the text to be copied to clipboard. Useful on platforms such as macOS that do not have the concept of primary selection. You can instead specify a name such as a1 to copy to a private kitty buffer. Map a shortcut with the paste_from_buffer action to paste from this private buffer. For example: 0.0 3.5 C copy_on_select a1 map shift+cmd+v paste_from_buffer a1 P Note that copying to the clipboard is a security risk, as all programs, including websites open in your browser can read the contents of the system clipboard. 0.0 paste_actions 0.0 3.5 C paste_actions quote-urls-at-prompt P A comma separated list of actions to take when pasting text into the terminal. The supported paste actions are: 0.0 quote-urls-at-prompt: If the text being pasted is a URL and the cursor is at a shell prompt, automatically quote the URL (needs %shell_integration). confirm: Confirm the paste if bracketed paste mode is not active or there is more a large amount of text being pasted. filter: Run the filter_paste() function from the file paste-actions.py in the kitty config directory on the pasted text. The text returned by the function will be actually pasted. 0.0 strip_trailing_spaces 0.0 3.5 C strip_trailing_spaces never P Remove spaces at the end of lines when copying to clipboard. A value of smart will do it when using normal selections, but not rectangle selections. A value of always will always do it. 0.0 select_by_word_characters 0.0 3.5 C select_by_word_characters @-./_~?&=%+# P Characters considered part of a word when double clicking. In addition to these characters any character that is marked as an alphanumeric character in the Unicode database will be matched. 0.0 select_by_word_characters_forward 0.0 3.5 C select_by_word_characters_forward P Characters considered part of a word when extending the selection forward on double clicking. In addition to these characters any character that is marked as an alphanumeric character in the Unicode database will be matched. If empty (default) %select_by_word_characters will be used for both directions. 0.0 click_interval 0.0 3.5 C click_interval -1.0 P The interval between successive clicks to detect double/triple clicks (in seconds). Negative numbers will use the system default instead, if available, or fallback to 0.5. 0.0 focus_follows_mouse 0.0 3.5 C focus_follows_mouse no P Set the active window to the window under the mouse when moving the mouse around. 0.0 pointer_shape_when_grabbed 0.0 3.5 C pointer_shape_when_grabbed arrow P The shape of the mouse pointer when the program running in the terminal grabs the mouse. Valid values are: arrow, beam and hand. 0.0 default_pointer_shape 0.0 3.5 C default_pointer_shape beam P The default shape of the mouse pointer. Valid values are: arrow, beam and hand. 0.0 pointer_shape_when_dragging 0.0 3.5 C pointer_shape_when_dragging beam P The default shape of the mouse pointer when dragging across text. Valid values are: arrow, beam and hand
mispipe(1): pipe two commands, returning the exit status of the first
odf_set_title(1): Set the title of a document using the first heading of the content
ohash_init(3), ohash_delete(3), ohash_lookup_interval(3), ohash_lookup_memory(3), ohash_find(3), ohash_remove(3), ohash_insert(3), ohash_first(3), ohash_next(3), ohash_entries(3): light-weight open hashing
scrub-files(1): securely erase files by filling with random data first
tstatd(1): Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
zzip_disk_findfile(3), zzip_disk_findfirst(3), zzip_disk_findnext(3), zzip_disk_findmatch(3): search for files in the (mmapped) zip central directory
zzip_entry_findfile(3), zzip_entry_findfirst(3), zzip_entry_findnext(3), zzip_entry_free(3), zzip_entry_findmatch(3): search for files in the (fseeko) zip central directory

home | help

Header And Logo

Peripheral Links

Site Navigation

FreeBSD Manual Pages

Header And Logo

Peripheral Links

Search

Site Navigation

FreeBSD Manual Pages