Skip site
navigation (1)Skip section navigation (2)
FreeBSD Manual Pages
- Q_FRAWMASK(3), Q_GFRAW(3), Q_GFABSVAL(3), Q_GFVAL(3), Q_SFVAL(3)
- fixed-point math functions which manipulate the fractional data bits
- Q_IFRAWMASK(3), Q_IFVALIMASK(3), Q_IFVALFMASK(3), Q_GIFRAW(3), Q_GIFABSVAL(3), Q_GIFVAL(3), Q_SIFVAL(3), Q_SIFVALS(3)
- fixed-point math functions which manipulate the combined integer/fractional data bits
- Q_INI(3), Q_NCBITS(3), Q_BT(3), Q_TC(3), Q_NTBITS(3), Q_NFCBITS(3), Q_MAXNFBITS(3), Q_NFBITS(3), Q_NIBITS(3), Q_RPSHFT(3), Q_ABS(3), Q_MAXSTRLEN(3), Q_TOSTR(3), Q_SHL(3), Q_SHR(3), Q_DEBUG(3)
- fixed-point math miscellaneous functions/variables
- Q_IRAWMASK(3), Q_GIRAW(3), Q_GIABSVAL(3), Q_GIVAL(3), Q_SIVAL(3)
- fixed-point math functions which manipulate the integer data bits
- Q_QABS(3), Q_Q2S(3), Q_Q2F(3)
- fixed-point math functions which operate on a single Q number
- Q_QADDI(3), Q_QDIVI(3), Q_QMULI(3), Q_QSUBI(3), Q_QFRACI(3), Q_QCPYVALI(3)
- fixed-point math functions which apply integers to a Q number
- Q_QADDQ(3), Q_QDIVQ(3), Q_QMULQ(3), Q_QSUBQ(3), Q_NORMPREC(3), Q_QMAXQ(3), Q_QMINQ(3), Q_QCLONEQ(3), Q_CPYVALQ(3)
- fixed-point math functions which operate on two Q numbers
- Q_SIGNED(3), Q_LTZ(3), Q_PRECEQ(3), Q_QLTQ(3), Q_QLEQ(3), Q_QGTQ(3), Q_QGEQ(3), Q_QEQ(3), Q_QNEQ(3), Q_OFLOW(3), Q_RELPREC(3)
- fixed-point math comparison and logic functions
- Q_SIGNSHFT(3), Q_SSIGN(3), Q_CRAWMASK(3), Q_SRAWMASK(3), Q_GCRAW(3), Q_GCVAL(3), Q_SCVAL(3)
- fixed-point math functions which manipulate the control/sign data bits
- VOP_ACCESS(9), VOP_ACCESSX(9)
- check access permissions of a file or Unix domain socket
- VOP_PATHCONF(9)
- return POSIX pathconf information
- acl(3)
- introduction to the POSIX.1e/NFSv4 ACL security API
- acl_equiv_mode_np(3)
- check if ACL can be represented as UNIX permissions
- aligned_alloc(3), alloca(3), calloc(3), free(3), malloc(3), posix_memalign(3), realloc(3), reallocf(3), valloc(3), mmap(3), munmap(3)
- memory management functions
- atf_add_test_case(3), atf_check(3), atf_check_equal(3), atf_check_not_equal(3), atf_config_get(3), atf_config_has(3), atf_expect_death(3), atf_expect_exit(3), atf_expect_fail(3), atf_expect_pass(3), atf_expect_signal(3), atf_expect_timeout(3), atf_fail(3), atf_get(3), atf_get_srcdir(3), atf_init_test_cases(3), atf_pass(3), atf_require_kmod(3), atf_require_prog(3), atf_set(3), atf_skip(3), atf_test_case(3)
- POSIX shell API to write ATF-based test programs
- axe(4)
- ASIX Electronics AX88x7x/760 USB Ethernet driver
- axge(4)
- ASIX Electronics AX88178A/179/179A USB Gigabit Ethernet driver
- bsddialog(3), bsddialog_backtitle(3), bsddialog_backtitle_rf(3), bsddialog_calendar(3), bsddialog_clear(3), bsddialog_color(3), bsddialog_color_attrs(3), bsddialog_checklist(3), bsddialog_datebox(3), bsddialog_end(3), bsddialog_form(3), bsddialog_gauge(3), bsddialog_geterror(3), bsddialog_get_theme(3), bsddialog_hascolors(3), bsddialog_infobox(3), bsddialog_init(3), bsddialog_init_notheme(3), bsddialog_initconf(3), bsddialog_inmode(3), bsddialog_menu(3), bsddialog_mixedgauge(3), bsddialog_mixedlist(3), bsddialog_msgbox(3), bsddialog_pause(3), bsddialog_radiolist(3), bsddialog_rangebox(3), bsddialog_refresh(3), bsddialog_set_theme(3), bsddialog_set_default_theme(3), bsddialog_textbox(3), bsddialog_timebox(3), bsddialog_yesno(3)
- TUI dialogs
- c89(1)
- POSIX.2 C language compiler
- cron(8)
- daemon to execute scheduled commands (Vixie Cron)
- cu(1)
- call UNIX over a serial line
- felix(4)
- driver for Microchip Ocelot Felix switch
- getpeereid(3)
- get the effective credentials of a UNIX-domain peer
- intpm(4)
- Intel PIIX4 Power Management controller driver
- ix(4)
- Intel 10Gb Ethernet driver
- ixl(4)
- Intel Ethernet 700 Series Driver
- libthr(3)
- 1:1 POSIX threads library
- madvise(2), posix_madvise(2)
- give advice about use of memory
- makewhatis(8)
- index UNIX manuals
- mbchain(9), mb_init(9), mb_initm(9), mb_done(9), mb_detach(9), mb_fixhdr(9), mb_reserve(9), mb_put_uint8(9), mb_put_uint16be(9), mb_put_uint16le(9), mb_put_uint32be(9), mb_put_uint32le(9), mb_put_int64be(9), mb_put_int64le(9), mb_put_mem(9), mb_put_mbuf(9), mb_put_uio(9)
- set of functions to build an mbuf chain from various data types
- mixer(8)
- manipulate soundcard mixer controls
- mixer_open(3), mixer_close(3), mixer_get_dev(3), mixer_get_dev_byname(3), mixer_add_ctl(3), mixer_add_ctl_s(3), mixer_remove_ctl(3), mixer_get_ctl(3), mixer_get_ctl_byname(3), mixer_set_vol(3), mixer_set_mute(3), mixer_mod_recsrc(3), mixer_get_dunit(3), mixer_set_dunit(3), mixer_get_mode(3), mixer_get_nmixers(3), mixer_get_path(3), MIX_ISDEV(3), MIX_ISMUTE(3), MIX_ISREC(3), MIX_ISRECSRC(3), MIX_VOLNORM(3), MIX_VOLDENORM(3)
- interface to OSS mixers
- mqueuefs(4)
- POSIX message queue file system
- pam_unix(8)
- UNIX PAM module
- pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_clear_pme(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_enable_pme(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_has_pm(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9)
- PCI bus interface
- pmc.iaf(3)
- measurement events for Intel fixed function performance counters
- pmc.ucf(3)
- measurement events for Intel uncore fixed function performance counters
- posix1e(3)
- introduction to the POSIX.1e security API
- posix_fadvise(2)
- give advice about use of file data
- posix_fallocate(2)
- pre-allocate storage for a range in a file
- posix_openpt(2)
- open a pseudo-terminal device
- posix_spawn(3), posix_spawnp(3)
- spawn a process
- posix_spawn_file_actions_addopen(3), posix_spawn_file_actions_adddup2(3), posix_spawn_file_actions_addclose(3), posix_spawn_file_actions_addclosefrom_np(3), posix_spawn_file_actions_addchdir_np(3), posix_spawn_file_actions_addfchdir_np(3)
- add open, dup2, close, closefrom, or chdir/fchdir actions to spawn file actions object
- posix_spawn_file_actions_init(3), posix_spawn_file_actions_destroy(3)
- initialize and destroy spawn file actions object
- posix_spawnattr_getflags(3), posix_spawnattr_setflags(3)
- get and set the spawn-flags attribute of a spawn attributes object
- posix_spawnattr_getpgroup(3), posix_spawnattr_setpgroup(3)
- get and set the spawn-pgroup attribute of a spawn attributes object
- posix_spawnattr_getschedparam(3), posix_spawnattr_setschedparam(3)
- get and set the spawn-schedparam attribute of a spawn attributes object
- posix_spawnattr_getschedpolicy(3), posix_spawnattr_setschedpolicy(3)
- get and set the spawn-schedpolicy attribute of a spawn attributes object
- posix_spawnattr_getsigdefault(3), posix_spawnattr_setsigdefault(3)
- get and set the spawn-sigdefault attribute of a spawn attributes object
- posix_spawnattr_getsigmask(3), posix_spawnattr_setsigmask(3)
- get and set the spawn-sigmask attribute of a spawn attributes object
- posix_spawnattr_init(3), posix_spawnattr_destroy(3)
- initialize and destroy spawn attributes object
- posixmqcontrol(1)
- Control POSIX mqueuefs message queues
- posixshmcontrol(1)
- Control POSIX shared memory segments
- pselect(2)
- synchronous I/O multiplexing a la POSIX.1g
- pthread(3)
- POSIX thread functions
- pthread_np(3)
- FreeBSD extensions to POSIX thread functions
- qmath(3)
- fixed-point math library based on the Q number format
- radixsort(3), sradixsort(3)
- radix sort
- re_format(7)
- POSIX 1003.2 regular expressions
- rpc_soc(3), auth_destroy(3), authnone_create(3), authunix_create(3), authunix_create_default(3), callrpc(3), clnt_broadcast(3), clnt_call(3), clnt_control(3), clnt_create(3), clnt_destroy(3), clnt_freeres(3), clnt_geterr(3), clnt_pcreateerror(3), clnt_perrno(3), clnt_perror(3), clnt_spcreateerror(3), clnt_sperrno(3), clnt_sperror(3), clntraw_create(3), clnttcp_create(3), clntudp_bufcreate(3), clntudp_create(3), clntunix_create(3), get_myaddress(3), pmap_getmaps(3), pmap_getport(3), pmap_rmtcall(3), pmap_set(3), pmap_unset(3), registerrpc(3), rpc_createerr(3), svc_destroy(3), svc_fds(3), svc_fdset(3), svc_getargs(3), svc_getcaller(3), svc_getreq(3), svc_getreqset(3), svc_register(3), svc_run(3), svc_sendreply(3), svc_unregister(3), svcerr_auth(3), svcerr_decode(3), svcerr_noproc(3), svcerr_noprog(3), svcerr_progvers(3), svcerr_systemerr(3), svcerr_weakauth(3), svcfd_create(3), svcunixfd_create(3), svcraw_create(3), svcunix_create(3), xdr_accepted_reply(3), xdr_authunix_parms(3), xdr_callhdr(3), xdr_callmsg(3), xdr_opaque_auth(3), xdr_pmap(3), xdr_pmaplist(3), xdr_rejected_reply(3), xdr_replymsg(3), xprt_register(3), xprt_unregister(3)
- library routines for remote procedure calls
- sem(4)
- POSIX semaphores
- snd_atiixp(4)
- ATI IXP bridge device driver
- time2posix(3), posix2time(3)
- convert seconds since the Epoch
- unix(4)
- UNIX-domain protocol family
- vaccess_acl_posix1e(9)
- generate a POSIX.1e ACL access control decision using vnode parameters
- zforce(1)
- force gzip files to have a.gz suffix
- BIO_f_prefix(3), BIO_set_prefix(3), BIO_set_indent(3), BIO_get_indent(3)
- prefix BIO filter
- OSSL_trace_set_channel(3), OSSL_trace_set_prefix(3), OSSL_trace_set_suffix(3), OSSL_trace_set_callback(3), OSSL_trace_cb(3)
- Enabling trace output
- SSL_CONF_CTX_set1_prefix(3)
- Set configuration context command prefix
- "glGetPixelMapfv(3), glGetPixelMapuiv(3), glGetPixelMapusv(3)
- return the specified pixel map
- "glLoadMatrixd(3), glLoadMatrixf(3)
- replace the current matrix with the specified matrix
- "glMultMatrixd(3), glMultMatrixf(3)
- multiply the current matrix with the specified matrix
- "glPixelMapfv(3), glPixelMapuiv(3), glPixelMapusv(3)
- set up pixel transfer maps
- "glPixelStoref(3), glPixelStorei(3)
- set pixel storage modes
- "glPixelTransferf(3), glPixelTransferi(3)
- set pixel transfer modes
- "glPushMatrix(3), glPopMatrix(3)
- push and pop the current matrix stack
- "glRasterPos2d(3), glRasterPos2f(3), glRasterPos2i(3), glRasterPos2s(3), glRasterPos3d(3), glRasterPos3f(3), glRasterPos3i(3), glRasterPos3s(3), glRasterPos4d(3), glRasterPos4f(3), glRasterPos4i(3), glRasterPos4s(3), glRasterPos2dv(3), glRasterPos2fv(3), glRasterPos2iv(3), glRasterPos2sv(3), glRasterPos3dv(3), glRasterPos3fv(3), glRasterPos3iv(3), glRasterPos3sv(3), glRasterPos4dv(3), glRasterPos4fv(3), glRasterPos4iv(3), glRasterPos4sv(3)
- specify the raster position for pixel operations
- "glRotated(3), glRotatef(3)
- multiply the current matrix by a rotation matrix
- "glScaled(3), glScalef(3)
- multiply the current matrix by a general scaling matrix
- "glTranslated(3), glTranslatef(3)
- multiply the current matrix by a translation matrix
- AG_AlphaFn(3)
- agar pixel arithmetic function
- AG_Fixed(3)
- agar fixed-position container widget
- AG_FixedPlotter(3)
- agar integer plot widget
- AG_Pixmap(3)
- agar pixmap display widget
- ALLEGRO_MIXER(3)
- Allegro 5 API
- ALLEGRO_MIXER_QUALITY(3)
- Allegro 5 API
- ALLEGRO_PIXEL_FORMAT(3)
- Allegro 5 API
- AllPlanes(3), BlackPixel(3), WhitePixel(3), ConnectionNumber(3), DefaultColormap(3), DefaultDepth(3), XListDepths(3), DefaultGC(3), DefaultRootWindow(3), DefaultScreenOfDisplay(3), DefaultScreen(3), DefaultVisual(3), DisplayCells(3), DisplayPlanes(3), DisplayString(3), XMaxRequestSize(3), XExtendedMaxRequestSize(3), LastKnownRequestProcessed(3), NextRequest(3), ProtocolVersion(3), ProtocolRevision(3), QLength(3), RootWindow(3), ScreenCount(3), ScreenOfDisplay(3), ServerVendor(3), VendorRelease(3)
- Display macros and functions
- AnalyseDists(1)
- Analyse a distance matrix
- BIO_f_prefix(3ossl), BIO_set_prefix(3ossl), BIO_set_indent(3ossl), BIO_get_indent(3ossl)
- prefix BIO filter
- BSb_back_solve(3)
- Backward triangular matrix solution on a block of right hand sides
- BSb_backward(3)
- Backward triangular matrix multiplication on a block of vectors
- BSb_for_solve(3)
- Forward triangular matrix solution on a block of vectors
- BSb_forward(3)
- Forward triangular matrix multiplication on a block of vectors
- BSback_solve(3)
- Backward triangular matrix solution on a single vector
- BSback_solve1(3)
- Backward triangular matrix solution on a single vector
- BSbackward(3)
- Backward triangular matrix multiplication on a single vector
- BSbackward1(3)
- Backward triangular matrix multiplication on a single vector
- BScopy_nz(3)
- Copy the nonzero values from one matrix to another
- BScopy_par_mat(3)
- Create of copy of a matrix
- BSctx_set_rt(3)
- Set whether information for fast future permutations with the same matrix structure should be kept
- BSeasy_A(3)
- Given A in a standard numerical format, construct the sparse A that we need for BlockSolve. This routine is particularly useful for matrices created in Fortran. The rows on a processor must be contiguous in the global numbering. If they are not, then other BlockSolve routines must be called to construct the matrix for BlockSolve. Arrays are indexed starting with 0. The values in a row must be sorted according to column number
- BSfactor(3)
- Compute the incomplete factor of a matrix
- BSfor_solve(3)
- Forward triangular matrix solution on a single vector
- BSfor_solve1(3)
- Forward triangular matrix solution on a single vector
- BSforward(3)
- Forward triangular matrix multiplication on a single vector
- BSforward1(3)
- Forward triangular matrix multiplication on a single vector
- BSfree_copy_par_mat(3)
- Free a copy of a sparse matrix (parallel format)
- BSfree_easymat(3)
- Free a sparse matrix allocated in BSeasy_mat
- BSfree_par_mat(3)
- Free a sparse matrix (parallel format)
- BSfree_spmat(3)
- Free a sparse matrix (original format)
- BSget_diag(3)
- Retrieve the diagonal of the matrix
- BSinv_diag_block(3)
- Invert the dense diagonal blocks of the matrix
- BSmain_perm(3)
- Permute the matrix for efficient parallel execution
- BSmain_reperm(3)
- Permute the sparse matrix using data structures generated by BSmain_perm on the same matrix structure
- BSscale_diag(3)
- Symmetrically scale the matrix by a diagonal matrix
- BSset_mat_icc_storage(3)
- Set the matrix storage
- BSset_mat_symmetric(3)
- Set the matrix symmetry
- BSsetup_block(3)
- Change the setup for triangular matrix multiplication to allow for multiple vectors
- BSsetup_forward(3)
- Set up the communication structure for triangular matrix solution
- BStri_mult(3)
- Multiply the matrix (A - shift*B) by a block of vectors
- BStri_solve(3)
- Multiply the matrix A(-1) by a block of vectors
- BlackPixelOfScreen(3), WhitePixelOfScreen(3), CellsOfScreen(3), DefaultColormapOfScreen(3), DefaultDepthOfScreen(3), DefaultGCOfScreen(3), DefaultVisualOfScreen(3), DoesBackingStore(3), DoesSaveUnders(3), DisplayOfScreen(3), XScreenNumberOfScreen(3), EventMaskOfScreen(3), HeightOfScreen(3), HeightMMOfScreen(3), MaxCmapsOfScreen(3), MinCmapsOfScreen(3), PlanesOfScreen(3), RootWindowOfScreen(3), WidthOfScreen(3), WidthMMOfScreen(3)
- screen information functions and macros
- Build_path_prefix_map(3o)
- Rewrite paths for reproducible builds
- CURLOPT_ABSTRACT_UNIX_SOCKET(3)
- abstract Unix domain socket
- CURLOPT_UNIX_SOCKET_PATH(3)
- Unix domain socket
- FcMatrixCopy(3)
- Copy a matrix
- FcMatrixEqual(3)
- Compare two matrices
- FcMatrixInit(3)
- initialize an FcMatrix structure
- FcMatrixMultiply(3)
- Multiply matrices
- FcMatrixRotate(3)
- Rotate a matrix
- FcMatrixScale(3)
- Scale a matrix
- FcMatrixShear(3)
- Shear a matrix
- FcPatternAdd-Type(3), FcPatternAddInteger(3), FcPatternAddDouble(3), FcPatternAddString(3), FcPatternAddMatrix(3), FcPatternAddCharSet(3), FcPatternAddBool(3), FcPatternAddFTFace(3), FcPatternAddLangSet(3), FcPatternAddRange(3)
- Add a typed value to a pattern
- FcPatternGet-Type(3), FcPatternGetInteger(3), FcPatternGetDouble(3), FcPatternGetString(3), FcPatternGetMatrix(3), FcPatternGetCharSet(3), FcPatternGetBool(3), FcPatternGetFTFace(3), FcPatternGetLangSet(3), FcPatternGetRange(3)
- Return a typed value from a pattern
- HPL_dlaprnt(3)
- Print the matrix A
- HPL_dlocmax(3)
- finds the maximum entry in matrix column
- HPL_dmatgen(3)
- random matrix generator
- HPL_pdgesv0(3)
- Factor an N x N+1 matrix
- HPL_pdgesvK1(3)
- Factor an N x N+1 matrix
- HPL_pdgesvK2(3)
- Factor an N x N+1 matrix
- HPL_pdlaprnt(3)
- Print a distributed matrix A
- HPL_pdmatgen(3)
- Parallel random matrix generator
- HPL_pdupdateNN(3)
- Broadcast a panel and update the trailing submatrix
- HPL_pdupdateNT(3)
- Broadcast a panel and update the trailing submatrix
- HPL_pdupdateTN(3)
- Broadcast a panel and update the trailing submatrix
- HPL_pdupdateTT(3)
- Broadcast a panel and update the trailing submatrix
- ImageByteOrder(3), BitmapBitOrder(3), BitmapPad(3), BitmapUnit(3), DisplayHeight(3), DisplayHeightMM(3), DisplayWidth(3), DisplayWidthMM(3), XListPixmapFormats(3), XPixmapFormatValues(3)
- image format functions and macros
- MATRIX(3)
- Fixed point matrix structure. Allegro game programming library
- MATRIX_f(3)
- Floating point matrix structure. Allegro game programming library
- MBK_FILTER_SFX(1)
- define the input/output filter suffixe. man1/alc_origin.1
- MPIX_Allreduce_enqueue(3)
- Enqueue an allreduce operation to a GPU stream that is associated with the local stream
- MPIX_Async_get_state(3)
- [short description]
- MPIX_Async_spawn(3)
- [short description]
- MPIX_Async_start(3)
- [short description]
- MPIX_Comm_agree(3)
- Performs agreement operation on comm
- MPIX_Comm_create_errhandler_x(3)
- Creates an MPI-style communicator errorhandler with an extra_state
- MPIX_Comm_failure_ack(3)
- Acknowledge the current group of failed processes
- MPIX_Comm_failure_get_acked(3)
- Get the group of acknowledged failures
- MPIX_Comm_get_failed(3)
- This local operation returns the group of processes that are locally known to have failed
- MPIX_Comm_get_stream(3)
- Get the stream object that is attached to the communicator
- MPIX_Comm_revoke(3)
- Prevent a communicator from being used in the future
- MPIX_Comm_shrink(3)
- Creates a new communitor from an existing communicator while excluding failed processes
- MPIX_Comm_test_threadcomm(3)
- Tests to see if a comm is a threadcomm
- MPIX_File_create_errhandler_x(3)
- Creates an MPI-style file errorhandler with an extra_state
- MPIX_GPU_query_support(3)
- Returns whether the specific type of GPU is supported
- MPIX_Grequest_class_allocate(3)
- Create and return a user-defined extended request based on a generalized request class
- MPIX_Grequest_class_create(3)
- [short description]
- MPIX_Grequest_start(3)
- Create and return a user-defined extended request
- MPIX_Info_set_hex(3)
- [short description]
- MPIX_Irecv_enqueue(3)
- Enqueue a nonblocking receive operation to a GPU stream that is associated with the local stream
- MPIX_Isend_enqueue(3)
- Enqueue a nonblocking send operation to a GPU stream that is associated with the local stream
- MPIX_Op_create_x(3)
- Creates a user-defined reduction op with an extra_state
- MPIX_Query_cuda_support(3)
- Returns whether CUDA is supported
- MPIX_Query_hip_support(3)
- Returns whether HIP (AMD GPU) is supported
- MPIX_Query_ze_support(3)
- Returns whether ZE (Intel GPU) is supported
- MPIX_Recv_enqueue(3)
- Enqueue a receive operation to a GPU stream that is associated with the local stream
- MPIX_Request_is_complete(3)
- [short description]
- MPIX_Send_enqueue(3)
- Enqueue a send operation to a GPU stream that is associated with the local stream
- MPIX_Session_create_errhandler_x(3)
- Creates an MPI-style session errorhandler with an extra_state
- MPIX_Start_progress_thread(3)
- Start a progress thread that will poll progress on the given stream
- MPIX_Stop_progress_thread(3)
- Stop the progress thread that polls progress on the given stream
- MPIX_Stream_comm_create(3)
- Create a new communicator with local stream attached
- MPIX_Stream_comm_create_multiplex(3)
- Create a new communicator with multiple local streams attached
- MPIX_Stream_create(3)
- Create a new stream object
- MPIX_Stream_free(3)
- Free a stream object
- MPIX_Stream_irecv(3)
- Start a nonblocking receive from a specific source stream to a specific local stream
- MPIX_Stream_isend(3)
- Start a nonblocking send from a specific local stream to a specific remote stream
- MPIX_Stream_progress(3)
- Invoke progress on the given stream
- MPIX_Stream_recv(3)
- Receive a message from a specific source stream to a specific local stream
- MPIX_Stream_send(3)
- Send message from a specific local stream to a specific destination stream
- MPIX_Threadcomm_finish(3)
- finish/deactiviate a thread communicator (inside thread parallel regions)
- MPIX_Threadcomm_free(3)
- free a thread communicator (outside thread parallel regions)
- MPIX_Threadcomm_init(3)
- initialize a thread communicator (outside thread parallel regions)
- MPIX_Threadcomm_start(3)
- start/activiate a thread communicator (inside thread parallel regions)
- MPIX_Type_iov(3)
- Return contiguous segments starting from an iov offset
- MPIX_Type_iov_len(3)
- Return the number of contiguous segments within max_iov_bytes
- MPIX_Wait_enqueue(3)
- Enqueue a wait operation to a GPU stream that is associated with the local stream
- MPIX_Waitall_enqueue(3)
- Enqueue a waitall operation to a GPU stream that is associated with the local stream
- MPIX_Win_create_errhandler_x(3)
- Creates an MPI-style window errorhandler with an extra_state
- M_Matrix(3)
- Agar-Math matrix-related functions
- M_Matview(3)
- Agar-Math matrix viewer widget
- MailScanner(8)
- Virus/Spam Scanner for Sendmail, Exim and Postfix
- Munin::Master::GroupRepository(3)
- FIX
- Munin::Master::UpdateWorker(3)
- FIX
- OSSL_trace_set_channel(3ossl), OSSL_trace_set_prefix(3ossl), OSSL_trace_set_suffix(3ossl), OSSL_trace_set_callback(3ossl), OSSL_trace_cb(3ossl)
- Enabling trace output
- RG_Pixmap(3)
- Agar-RG surface element
- RG_Tileset(3), RG(3)
- Agar feature-based pixel graphics
- SDL_CreateRGBSurfaceFrom(3)
- Create an SDL_Surface from pixel data
- SDL_GetRGB(3)
- Get RGB values from a pixel in the specified pixel format
- SDL_GetRGBA(3)
- Get RGBA values from a pixel in the specified pixel format
- SDL_MapRGB(3)
- Map a RGB color value to a pixel format
- SDL_MapRGBA(3)
- Map a RGBA color value to a pixel format
- SDL_MixAudio(3)
- Mix audio data
- SDL_Palette(3)
- Color palette for 8-bit pixel formats
- SDL_PixelFormat(3)
- Stores surface format information
- SDL_SetColorKey(3)
- Sets the color key (transparent pixel) in a blittable surface and RLE acceleration
- SDL_SetVideoMode(3)
- Set up a video mode with the specified width, height and bits-per-pixel
- SSL_CONF_CTX_set1_prefix(3)
- Set configuration context command prefix
- SSL_CONF_CTX_set1_prefix(3ossl)
- Set configuration context command prefix
- STRUCTS_ARRAY_TYPE(3), STRUCTS_FIXEDARRAY_TYPE(3)
- structs types for arrays
- STRUCTS_DATA_TYPE(3), STRUCTS_FIXEDDATA_TYPE(3)
- structs types for binary data
- Sympa::Message::Plugin::FixEncoding(3Sympa)
- Example module for message hook to correct charset and encoding of messages
- TIFFReadRGBAImage(3tiff)
- read and decode an image into a fixed-format raster
- TIFFReadRGBAStrip(3tiff)
- read and decode an image strip into a fixed-format raster
- TIFFReadRGBATile(3tiff)
- read and decode an image tile into a fixed-format raster
- TPMLIB_SetDebugFD(3), TPMLIB_SetDebugFD (3)
- Set the file descriptor to send the debug output to TPMLIB_SetDebugLevel - Set the debugging level TPMLIB_SetDebugPrefix - Set the prefix for each debugging line
- Tcl_AddErrorInfo.tcl86(3), Tcl_GetReturnOptions(3), Tcl_SetReturnOptions(3), Tcl_AddErrorInfo(3), Tcl_AppendObjToErrorInfo(3), Tcl_AddObjErrorInfo(3), Tcl_SetObjErrorCode(3), Tcl_SetErrorCode(3), Tcl_SetErrorCodeVA(3), Tcl_SetErrorLine(3), Tcl_GetErrorLine(3), Tcl_PosixError(3), Tcl_LogCommandInfo(3)
- retrieve or record information about errors and other return options
- Tcl_AddErrorInfo.tcl90(3), Tcl_GetReturnOptions(3), Tcl_SetReturnOptions(3), Tcl_AddErrorInfo(3), Tcl_AppendObjToErrorInfo(3), Tcl_AddObjErrorInfo(3), Tcl_SetObjErrorCode(3), Tcl_SetErrorCode(3), Tcl_SetErrorLine(3), Tcl_GetErrorLine(3), Tcl_PosixError(3), Tcl_LogCommandInfo(3)
- retrieve or record information about errors and other return options
- Tcl_CreateFileHandler.tcl86(3), Tcl_CreateFileHandler(3), Tcl_DeleteFileHandler(3)
- associate procedure callbacks with files or devices (Unix only)
- Tcl_CreateFileHandler.tcl90(3), Tcl_CreateFileHandler(3), Tcl_DeleteFileHandler(3)
- associate procedure callbacks with files or devices (Unix only)
- Tcl_GetOpenFile.tcl86(3), Tcl_GetOpenFile(3)
- Return a FILE* for a channel registered in the given interpreter (Unix only)
- Tcl_GetOpenFile.tcl90(3), Tcl_GetOpenFile(3)
- Return a FILE* for a channel registered in the given interpreter (Unix only)
- Thread(3o)
- Lightweight threads for Posix 1003.1c and Win32
- ThreadUnix(3o)
- Thread-compatible system calls
- TixIntro(n)
- Introduction to the Tix library '" '"
- Tk_AllocBitmapFromObj.tk86(3), Tk_AllocBitmapFromObj(3), Tk_GetBitmap(3), Tk_GetBitmapFromObj(3), Tk_DefineBitmap(3), Tk_NameOfBitmap(3), Tk_SizeOfBitmap(3), Tk_FreeBitmapFromObj(3), Tk_FreeBitmap(3)
- maintain database of single-plane pixmaps
- Tk_ChangeWindowAttributes.tk86(3), Tk_ConfigureWindow(3), Tk_MoveWindow(3), Tk_ResizeWindow(3), Tk_MoveResizeWindow(3), Tk_SetWindowBorderWidth(3), Tk_ChangeWindowAttributes(3), Tk_SetWindowBackground(3), Tk_SetWindowBackgroundPixmap(3), Tk_SetWindowBorder(3), Tk_SetWindowBorderPixmap(3), Tk_SetWindowColormap(3), Tk_DefineCursor(3), Tk_UndefineCursor(3)
- change window configuration or attributes
- Tk_FreePixmap.tk86(3), Tk_GetPixmap(3), Tk_FreePixmap(3)
- allocate and free pixmaps
- Tk_GetMMFromObj.tk86(3), Tk_GetPixelsFromObj(3), Tk_GetPixels(3), Tk_GetMMFromObj(3), Tk_GetScreenMM(3)
- translate between strings and screen units
- Unix(3o)
- Interface to the Unix system
- Unix.LargeFile(3o)
- File operations on large files
- UnixLabels(3o)
- Interface to the Unix system
- UnixLabels.LargeFile(3o)
- File operations on large files
- V3D(3)
- Fixed point vertex structure used by 3d functions. Allegro game programming library
- X509v3_addr_add_inherit(3), X509v3_addr_add_prefix(3), X509v3_addr_add_range(3), X509v3_addr_canonize(3), X509v3_addr_is_canonical(3)
- RFC 3779 IP address delegation extensions
- XChangeWindowAttributes(3), XSetWindowBackground(3), XSetWindowBackgroundPixmap(3), XSetWindowBorder(3), XSetWindowBorderPixmap(3), XSetWindowColormap(3)
- change window attributes
- XCreateFontCursor(3), XCreatePixmapCursor(3), XCreateGlyphCursor(3)
- create cursors
- XCreatePixmap(3), XFreePixmap(3)
- create or destroy pixmaps
- XInitImage(3), XCreateImage(3), XGetPixel(3), XPutPixel(3), XSubImage(3), XAddPixel(3), XDestroyImage(3)
- image utilities
- XPresentPixmap(3)
- provide pixmap for presentation as window contents
- XReadBitmapFile(3), XReadBitmapFileData(3), XWriteBitmapFile(3), XCreatePixmapFromBitmapData(3), XCreateBitmapFromData(3)
- manipulate bitmaps
- XShmQueryExtension(3), XShmQueryVersion(3), XShmPixmapFormat(3), XShmAttach(3), XShmDetach XShmCreateImage(3), XShmPutImage(3), XShmGetImage(3), XShmCreatePixmap(3), XShmGetEventBase(3)
- X Shared Memory extension functions
- XbaeMatrix(3)
- The Bellcore Application Environment (BAE) XbaeMatrix widget class
- Xfixes(3), XFixes(3)
- Augmented versions of core protocol requests
- XmDestroyPixmap(3)
- A pixmap caching function that removes a pixmap from the pixmap cache "XmDestroyPixmap" "pixmaps"
- XmGetPixmap(3)
- A pixmap caching function that generates a pixmap, stores it in a pixmap cache, and returns the pixmap "XmGetPixmap" "pixmaps"
- XmGetPixmapByDepth(3)
- A pixmap caching function that generates a pixmap, stores it in a pixmap cache, and returns the pixmap "XmGetPixmapByDepth" "pixmaps"
- XmGetScaledPixmap(3)
- read a pixmap file and scale it according to pixmap and print resolution
- XmInstallImage(3)
- A pixmap caching function that adds an image to the image cache "XmInstallImage" "pixmaps"
- XmStringBaseline(3)
- A compound string function that returns the number of pixels between the top of the character box and the baseline of the first line of text "XmStringBaseline" "compound string functions" "XmStringBaseline"
- XmTabStackXYToWidget(3)
- A TabStack function that converts a pixel coordinate to the widget ID of the tab occupying that space "XmTabStackXYToWidget" "TabStack functions" "XmTabStackXYToWidget"
- XmUninstallImage(3)
- A pixmap caching function that removes an image from the image cache "XmUninstallImage" "pixmaps"
- XmtCreatePixmapFromXmtImage(3), XmtCreatePixmapFromXmtImage()(3), XmtCreateXImageFromXmtImage()(3)
- create a pixmap or XImage from an XmtImage
- XmtCreatePixmapIcon(3), XmtCreatePixmapIcon()(3), XmtChangePixmapIcon()(3), XmtDestroyPixmapIcon()(3)
- handle non-rectangular multi-color window manager icons
- XmtGetBitmap(3), XmtGetBitmap()(3), XmtGetPixmap()(3)
- find and return the named bitmap or pixmap
- XmtLayoutConvertSizeToPixels(3), XmtLayoutConvertSizeToPixels()(3)
- convert a resolution independent size to pixels
- XmtLayoutPixmap(3)
- an XmtLayout gadget that displays a pixmap or a bitmap
- XmtLookupPixmap(3), XmtLookupPixmap()(3), XmtLookupSimplePixmap()(3), XmtLookupWidgetPixmap()(3), XmtLookupBitmap()(3), XmtLookupBitmask()(3)
- get a named pixmap or bitmap from the Xmt image cache
- XmtParseXpmData(3), XmtParseXpmData()(3), XmtParseXpmFile()(3), XmtFreeXmtImage()(3)
- parse an XPM pixmap into the intermediate XmtImage format
- XmtRegisterColor(3), XmtRegisterColor()(3), XmtVaRegisterColors()(3), XmtRegisterColors()(3), XmtRegisterPixel()(3), XmtRegisterStandardColors()(3)
- define symbolic color names in a color table
- XmtRegisterImage(3), XmtRegisterImage()(3), XmtRegisterXbmData()(3)
- register pixmap and bitmap data in the Xmt pixmap cache
- XmtRegisterUnixProcedures(3), XmtRegisterXtProcedures()(3), XmtRegisterXmtProcedures()(3), XmtRegisterUnixProcedures()(3)
- register commonly used procedures with the Xmt callback converter
- XmtReleasePixmap(3), XmtReleasePixmap()(3)
- release a pixmap or bitmap from the Xmt image cache
- XpmCreatePixmap(3)
- create a pixmap
- _getpixel(3), _getpixel15(3), _getpixel16(3), _getpixel24(3), _getpixel32(3)
- Faster specific version of getpixel(). Allegro game programming library
- _lag2_(3)
- <em>lag2</em>: general matrix, convert double <=> single
- _lat2_(3)
- <em>lat2</em>: triangular matrix, convert double <=> single
- _putpixel(3), _putpixel15(3), _putpixel16(3), _putpixel24(3), _putpixel32(3)
- Faster specific version of putpixel(). Allegro game programming library
- aa_imgheight(3)
- returns height of the emulated image in pixels
- aa_imgwidth(3)
- returns width of the emulated image in pixels
- aa_putpixel(3)
- put pixel to emulated framebuffer
- abl(1)
- Prefixed representation for boolean functions man1/alc_origin.1
- access(5)
- Postfix SMTP server access table
- activateCDKMatrix(3), activateCDKMatrix cleanCDKMatrix cleanCDKMatrixCell destroyCDKMatrix drawCDKMatrix eraseCDKMatrix getCDKMatrixBox getCDKMatrixCell getCDKMatrixCol getCDKMatrixRow injectCDKMatrix jumpToCell moveToCDKMatrixCell newCDKMatrix setCDKMatrix setCDKMatrixBackgroundAttrib setCDKMatrixBackgroundColor setCDKMatrixBox setCDKMatrixBoxAttribute setCDKMatrixCB setCDKMatrixCell setCDKMatrixCells setCDKMatrixHorizontalChar setCDKMatrixLLChar setCDKMatrixLRChar setCDKMatrixPostProcess setCDKMatrixPreProcess setCDKMatrixULChar setCDKMatrixURChar setCDKMatrixVerticalChar cdk_matrix(3)
- Cdk matrix widget
- activateCDKTemplate(3), activateCDKTemplate cleanCDKTemplate destroyCDKTemplate drawCDKTemplate eraseCDKTemplate getCDKTemplateBox getCDKTemplateMin getCDKTemplateValue injectCDKTemplate mixCDKTemplate newCDKTemplate setCDKTemplate setCDKTemplateBackgroundAttrib setCDKTemplateBackgroundColor setCDKTemplateBox setCDKTemplateBoxAttribute setCDKTemplateCB setCDKTemplateHorizontalChar setCDKTemplateLLChar setCDKTemplateLRChar setCDKTemplateMin setCDKTemplatePostProcess setCDKTemplatePreProcess setCDKTemplateULChar setCDKTemplateURChar setCDKTemplateValue setCDKTemplateVerticalChar unmixCDKTemplate cdk_template(3)
- Cdk template widget
- adplay(1)
- AdPlay/UNIX console-based OPL2 audio player
- affix(1)
- fix a corrupted AFF file
- aggregate(1)
- optimise a list of route prefixes to help make nice short filters
- aggregate-ios(1)
- optimise a concatenated set of cisco/IOS prefix filters to help make them nice and short
- airmon-ng(8)
- POSIX sh script designed to turn wireless cards into monitor mode
- al_attach_audio_stream_to_mixer(3)
- Allegro 5 API
- al_attach_mixer_to_mixer(3)
- Allegro 5 API
- al_attach_mixer_to_voice(3)
- Allegro 5 API
- al_attach_sample_instance_to_mixer(3)
- Allegro 5 API
- al_create_mixer(3)
- Allegro 5 API
- al_destroy_mixer(3)
- Allegro 5 API
- al_detach_mixer(3)
- Allegro 5 API
- al_draw_pixel(3)
- Allegro 5 API
- al_fixacos(3)
- Allegro 5 API
- al_fixadd(3)
- Allegro 5 API
- al_fixasin(3)
- Allegro 5 API
- al_fixatan(3)
- Allegro 5 API
- al_fixatan2(3)
- Allegro 5 API
- al_fixceil(3)
- Allegro 5 API
- al_fixcos(3)
- Allegro 5 API
- al_fixdiv(3)
- Allegro 5 API
- al_fixed(3)
- Allegro 5 API
- al_fixfloor(3)
- Allegro 5 API
- al_fixhypot(3)
- Allegro 5 API
- al_fixmul(3)
- Allegro 5 API
- al_fixsin(3)
- Allegro 5 API
- al_fixsqrt(3)
- Allegro 5 API
- al_fixsub(3)
- Allegro 5 API
- al_fixtan(3)
- Allegro 5 API
- al_fixtof(3)
- Allegro 5 API
- al_fixtoi(3)
- Allegro 5 API
- al_fixtorad_r(3)
- Allegro 5 API
- al_ftofix(3)
- Allegro 5 API
- al_get_default_mixer(3)
- Allegro 5 API
- al_get_mixer_attached(3)
- Allegro 5 API
- al_get_mixer_channels(3)
- Allegro 5 API
- al_get_mixer_depth(3)
- Allegro 5 API
- al_get_mixer_frequency(3)
- Allegro 5 API
- al_get_mixer_gain(3)
- Allegro 5 API
- al_get_mixer_playing(3)
- Allegro 5 API
- al_get_mixer_quality(3)
- Allegro 5 API
- al_get_pixel(3)
- Allegro 5 API
- al_get_pixel_block_height(3)
- Allegro 5 API
- al_get_pixel_block_size(3)
- Allegro 5 API
- al_get_pixel_block_width(3)
- Allegro 5 API
- al_get_pixel_format_bits(3)
- Allegro 5 API
- al_get_pixel_size(3)
- Allegro 5 API
- al_itofix(3)
- Allegro 5 API
- al_mixer_has_attachments(3)
- Allegro 5 API
- al_put_blended_pixel(3)
- Allegro 5 API
- al_put_pixel(3)
- Allegro 5 API
- al_radtofix_r(3)
- Allegro 5 API
- al_restore_default_mixer(3)
- Allegro 5 API
- al_set_audio_stream_channel_matrix(3)
- Allegro 5 API
- al_set_default_mixer(3)
- Allegro 5 API
- al_set_mixer_frequency(3)
- Allegro 5 API
- al_set_mixer_gain(3)
- Allegro 5 API
- al_set_mixer_playing(3)
- Allegro 5 API
- al_set_mixer_postprocess_callback(3)
- Allegro 5 API
- al_set_mixer_quality(3)
- Allegro 5 API
- al_set_sample_instance_channel_matrix(3)
- Allegro 5 API
- al_set_shader_matrix(3)
- Allegro 5 API
- al_ustr_has_prefix(3)
- Allegro 5 API
- al_ustr_has_prefix_cstr(3)
- Allegro 5 API
- al_ustr_has_suffix(3)
- Allegro 5 API
- al_ustr_has_suffix_cstr(3)
- Allegro 5 API
- algae(1)
- another matrix programming language
- alsamixer(1)
- soundcard mixer for ALSA soundcard driver, with ncurses interface
- amixer(1)
- command-line mixer for ALSA soundcard driver
- anvil(8)
- Postfix session count and request rate control
- apertium-utils-fixlatex(1)
- LaTeX format fixer for Apertium
- apparix(1)
- augmenting cd with bookmarks
- apply_matrix(3), apply_matrix_f(3)
- Multiplies a point by a transformation matrix. Allegro game programming library
- asmix(1)
- the AfterStep volume control knob
- asmixer(1)
- the AfterStep Mixer
- atf-sh(3), atf_add_test_case(3), atf_check(3), atf_check_equal(3), atf_check_not_equal(3), atf_config_get(3), atf_config_has(3), atf_expect_death(3), atf_expect_exit(3), atf_expect_fail(3), atf_expect_pass(3), atf_expect_signal(3), atf_expect_timeout(3), atf_fail(3), atf_get(3), atf_get_srcdir(3), atf_pass(3), atf_require_prog(3), atf_set(3), atf_skip(3), atf_test_case(3)
- POSIX shell API to write ATF-based test programs
- aumix(1)
- adjust audio mixer
- autosp(1)
- preprocessor to generate note-spacing commands for MusiXTeX scores
- barman-cloud-backup(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-backup [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ { { -z | --gzip } | { -j | --bzip2 } | --snappy } ] [ { -h | --host } HOST ] [ { -p | --port } PORT ] [ { -U | --user } USER ] [ { -d | --dbname } DBNAME ] [ { -n | --name } BACKUP_NAME ] [ { -J | --jobs } JOBS ] [ { -S | --max-archive-size } MAX_ARCHIVE_SIZE ] [ --immediate-checkpoint ] [ --min-chunk-size MIN_CHUNK_SIZE ] [ --max-bandwidth MAX_BANDWIDTH ] [ --snapshot-instance SNAPSHOT_INSTANCE ] [ --snapshot-disk NAME [ --snapshot-disk NAME ... ] ] [ --snapshot-zone GCP_ZONE ] [ -snapshot-gcp-project GCP_PROJECT ] [ --tag KEY,VALUE [ --tag KEY,VALUE ... ] ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { -e | --encryption } { AES256 | aws:kms } ] [ --sse-kms-key-id SSE_KMS_KEY_ID ] [ --aws-region AWS_REGION ] [ --aws-await-snapshots-timeout AWS_AWAIT_SNAPSHOTS_TIMEOUT ] [ --aws-snapshot-lock-mode { compliance | governance } ] [ --aws-snapshot-lock-duration DAYS ] [ --aws-snapshot-lock-cool-off-period HOURS ] [ --aws-snapshot-lock-expiration-date DATETIME ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --encryption-scope ENCRYPTION_SCOPE ] [ --azure-subscription-id AZURE_SUBSCRIPTION_ID ] [ --azure-resource-group AZURE_RESOURCE_GROUP ] [ --gcp-project GCP_PROJECT ] [ --kms-key-name KMS_KEY_NAME ] [ --gcp-zone GCP_ZONE ] DESTINATION_URL SERVER_NAME Description The barman-cloud-backup script is used to create a local backup of a Postgres server and transfer it to a supported cloud provider, bypassing the Barman server. It can also be utilized as a hook script for copying Barman backups from the Barman server to one of the supported clouds (post_backup_retry_script). This script requires read access to PGDATA and tablespaces, typically run as the postgres user. When used on a Barman server, it requires read access to the directory where Barman backups are stored. If --snapshot- arguments are used and snapshots are supported by the selected cloud provider, the backup will be performed using snapshots of the specified disks (--snapshot-disk). The backup label and metadata will also be uploaded to the cloud. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. IMPORTANT: 0.0 3.5 The cloud upload may fail if any file larger than the configured --max-archive-size is present in the data directory or tablespaces. However, Postgres files up to 1GB are always allowed, regardless of the --max-archive-size setting. Parameters 0.0 SERVER_NAME Name of the server to be backed up. DESTINATION_URL URL of the cloud destination, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. -z / --gzip gzip-compress the backup while uploading to the cloud (should not be used with python < 3.2). -j / --bzip2 bzip2-compress the backup while uploading to the cloud (should not be used with python < 3.3). --snappy snappy-compress the backup while uploading to the cloud (requires optional python-snappy library). -h / --host Host or Unix socket for Postgres connection (default: libpq settings). -p / --port Port for Postgres connection (default: libpq settings). -U / --user User name for Postgres connection (default: libpq settings). -d / --dbname Database name or conninfo string for Postgres connection (default: (dqpostgres(dq). -n / --name A name which can be used to reference this backup in commands such as barman-cloud-restore and barman-cloud-backup-delete. -J / --jobs Number of subprocesses to upload data to cloud storage (default: 2). -S / --max-archive-size Maximum size of an archive when uploading to cloud storage (default: 100GB). --immediate-checkpoint Forces the initial checkpoint to be done as quickly as possible. --min-chunk-size Minimum size of an individual chunk when uploading to cloud storage (default: 5MB for aws-s3, 64KB for azure-blob-storage, not applicable for google-cloud-storage). --max-bandwidth The maximum amount of data to be uploaded per second when backing up to object storages (default: 0 - no limit). --snapshot-instance Instance where the disks to be backed up as snapshots are attached. --snapshot-disk Name of a disk from which snapshots should be taken. --tag Tag to be added to all uploaded files in cloud storage, and/or to snapshots created, if snapshots are used. --tags Tags to be added to all uploaded files in cloud storage, and/or to snapshots created, if snapshots are used. NOTE: 0.0 3.5 If you are using --tags before positional arguments, you must insert -- after it to indicate the end of optional arguments. This tells the parser to treat everything after -- as positional arguments. Without the --, Barman may misinterpret positional arguments as values for the last option. Deprecated since version 3.15: --tags is deprecated. Use --tag instead. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file)
- replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). -e / --encryption The encryption algorithm used when storing the uploaded data in S3. Allowed options: 7.0 (bu 2 AES256. (bu 2 aws:kms. --sse-kms-key-id The AWS KMS key ID that should be used for encrypting the uploaded data in S3. Can be specified using the key ID on its own or using the full ARN for the key. Only allowed if -e / --encryption is set to aws:kms. --aws-region The name of the AWS region containing the EC2 VM and storage volumes defined by the --snapshot-instance and --snapshot-disk arguments. --aws-await-snapshots-timeout The length of time in seconds to wait for snapshots to be created in AWS before timing out (default: 3600 seconds). --aws-snapshot-lock-mode The lock mode for the snapshot. This is only valid if --snapshot-instance and --snapshot-disk are set. Allowed options: 7.0 (bu 2 compliance. (bu 2 governance. --aws-snapshot-lock-duration The lock duration is the period of time (in days) for which the snapshot is to remain locked, ranging from 1 to 36,500. Set either the lock duration or the expiration date (not both). --aws-snapshot-lock-cool-off-period The cooling-off period is an optional period of time (in hours) that you can specify when you lock a snapshot in compliance mode, ranging from 1 to 72. --aws-snapshot-lock-expiration-date The lock duration is determined by an expiration date in the future. It must be at least 1 day after the snapshot creation date and time, using the format YYYY-MM-DDTHH:MM:SS.sssZ. Set either the lock duration or the expiration date (not both). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default. --encryption-scope The name of an encryption scope defined in the Azure Blob Storage service which is to be used to encrypt the data in Azure. --azure-subscription-id The ID of the Azure subscription which owns the instance and storage volumes defined by the --snapshot-instance and --snapshot-disk arguments. --azure-resource-group The name of the Azure resource group to which the compute instance and disks defined by the --snapshot-instance and --snapshot-disk arguments belong. Extra options for GCP cloud provider 0.0 --gcp-project GCP project under which disk snapshots should be stored. --snapshot-gcp-project (deprecated) GCP project under which disk snapshots should be stored - replaced by --gcp-project. --kms-key-name The name of the GCP KMS key which should be used for encrypting the uploaded data in GCS. --gcp-zone Zone of the disks from which snapshots should be taken. --snapshot-zone (deprecated) Zone of the disks from which snapshots should be taken - replaced by --gcp-zone
- beetsconfig(5)
- beets configuration file Beets has an extensive configuration system that lets you customize nearly every aspect of its operation. To configure beets, you create a file called config.yaml. The location of the file depends on your platform (type beet config -p to see the path on your system): 0.0 (bu 2 On Unix-like OSes, write ~/.config/beets/config.yaml. (bu 2 On Windows, use %APPDATA%ebeetseconfig.yaml. This is usually in a directory like C:eUserseYoueAppDataeRoaming. (bu 2 On OS X, you can use either the Unix location or ~/Library/Application Support/beets/config.yaml. You can launch your text editor to create or update your configuration by typing beet config -e. (See the X'tty: link #config-cmd'%configX'tty: link' command for details.) It is also possible to customize the location of the configuration file and even use multiple layers of configuration. See %Configuration Location, below. The config file uses X'tty: link https://yaml.org/'%YAMLX'tty: link' syntax. You can use the full power of YAML, but most configuration options are simple key/value pairs. This means your config file will look like this: 0.0 3.5 option: value another_option: foo bigger_option: key: value foo: bar In YAML, you will need to use spaces (not tabs!) to indent some lines. If you have questions about more sophisticated syntax, take a look at the X'tty: link https://yaml.org/'%YAMLX'tty: link' documentation. The rest of this page enumerates the dizzying litany of configuration options available in beets. You might also want to see an %example. 0.0 (bu 2 %Global Options 2.0 (bu 2 %library (bu 2 %directory (bu 2 %plugins (bu 2 %include (bu 2 %pluginpath (bu 2 %ignore (bu 2 %ignore_hidden (bu 2 %replace (bu 2 %path_sep_replace (bu 2 %asciify_paths (bu 2 %art_filename (bu 2 %threaded (bu 2 %format_item (bu 2 %format_album (bu 2 %sort_item (bu 2 %sort_album (bu 2 %sort_case_insensitive (bu 2 %original_date (bu 2 %artist_credit (bu 2 %per_disc_numbering (bu 2 %aunique (bu 2 %sunique (bu 2 %terminal_encoding (bu 2 %clutter (bu 2 %max_filename_length (bu 2 %id3v23 (bu 2 %va_name (bu 2 %UI Options 2.0 (bu 2 %color (bu 2 %colors (bu 2 %terminal_width (bu 2 %length_diff_thresh (bu 2 %import (bu 2 %Importer Options 2.0 (bu 2 %write (bu 2 %copy (bu 2 %move (bu 2 %link (bu 2 %hardlink (bu 2 %reflink (bu 2 %resume (bu 2 %incremental (bu 2 %incremental_skip_later (bu 2 %from_scratch (bu 2 %quiet (bu 2 %quiet_fallback (bu 2 %none_rec_action (bu 2 %timid (bu 2 %log (bu 2 %default_action (bu 2 %languages (bu 2 %ignored_alias_types (bu 2 %detail (bu 2 %group_albums (bu 2 %autotag (bu 2 %duplicate_keys (bu 2 %duplicate_action (bu 2 %duplicate_verbose_prompt (bu 2 %bell (bu 2 %set_fields (bu 2 %singleton_album_disambig (bu 2 %MusicBrainz Options 2.0 (bu 2 %enabled (bu 2 %searchlimit (bu 2 %extra_tags (bu 2 %genres (bu 2 %external_ids (bu 2 %Autotagger Matching Options 2.0 (bu 2 %max_rec (bu 2 %preferred (bu 2 %ignored (bu 2 %required (bu 2 %ignored_media (bu 2 %ignore_data_tracks (bu 2 %ignore_video_tracks (bu 2 %Path Format Configuration (bu 2 %Configuration Location 2.0 (bu 2 %Environment Variable (bu 2 %Command-Line Option (bu 2 %Default Location (bu 2 %Example
- bestups(8)
- Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment
- blas2_grp(3)
- Level 2 BLAS: matrix-vector ops
- blas2_like_grp(3)
- Level 2 BLAS-like matrix-vector ops
- blas3_grp(3)
- Level 3 BLAS: matrix-matrix ops
- blas3_like_grp(3)
- Level 3 BLAS-like matrix-matrix ops
- bnetd(1)
- Unix Battle.net daemon
- bnetd.conf(5)
- configuration for the Unix Battle.net daemon
- bntext(5), bnmotd.txt(5), bnnews.txt bnissue.txt(5)
- messages for the Unix Battle.net daemon
- bounce(5)
- Postfix bounce message template format
- bounce(8)
- Postfix delivery status reports
- bsd(n), BSD(n)
- Tcl interface to various BSD UNIX functions
- bsddialog(3), bsddialog_backtitle(3), bsddialog_backtitle_rf(3), bsddialog_calendar(3), bsddialog_clear(3), bsddialog_color(3), bsddialog_color_attrs(3), bsddialog_checklist(3), bsddialog_datebox(3), bsddialog_end(3), bsddialog_form(3), bsddialog_gauge(3), bsddialog_geterror(3), bsddialog_get_theme(3), bsddialog_hascolors(3), bsddialog_infobox(3), bsddialog_init(3), bsddialog_init_notheme(3), bsddialog_initconf(3), bsddialog_inmode(3), bsddialog_menu(3), bsddialog_mixedgauge(3), bsddialog_mixedlist(3), bsddialog_msgbox(3), bsddialog_pause(3), bsddialog_radiolist(3), bsddialog_rangebox(3), bsddialog_refresh(3), bsddialog_set_theme(3), bsddialog_set_default_theme(3), bsddialog_textbox(3), bsddialog_timebox(3), bsddialog_yesno(3)
- TUI dialogs
- btsixad(8)
- Driver for Sixaxis gamepad connected over Bluetooth
- build.man.mk(5)
- bsdbuild - compilation of UNIX manual pages
- bw_unix(8)
- UNIX pipe bandwidth
- cadaver(1)
- A command-line WebDAV client for Unix
- canonical(5)
- Postfix canonical table format
- cargo-fix(1)
- [em] Automatically fix lint warnings reported by rustc
- cd-fix-profile(1)
- Color Manager Testing Tool
- cf(1)
- unix time to formated time and date filter
- cidr_table(5)
- format of Postfix CIDR tables
- cleanup(8)
- canonicalize and enqueue Postfix message
- clip3d(3)
- Clips the polygon given in vtx using fixed point math. Allegro game programming library
- clockadd(1)
- adjust the local UNIX clock, once
- cmake-variables(7)
- CMake Variables Reference This page documents variables that are provided by CMake or have meaning to CMake when set by project code. For general information on variables, see the %Variables section in the cmake-language manual. NOTE: 0.0 3.5 CMake reserves identifiers that: 0.0 (bu 2 begin with CMAKE_ (upper-, lower-, or mixed-case), or (bu 2 begin with _CMAKE_ (upper-, lower-, or mixed-case), or (bu 2 begin with _ followed by the name of any %CMake Command
- cmdtest(1)
- blackbox testing of Unix command line tools
- coap_address(3), coap_address_t(3), coap_address_init(3), coap_address_copy(3), coap_address_equals(3), coap_address_get_port(3), coap_address_set_port(3), coap_get_available_scheme_hint_bits(3), coap_addr_info_t(3), coap_resolve_address_info(3), coap_free_address_info(3), coap_sockaddr_un(3), coap_address_set_unix_domain(3), coap_host_is_unix_domain(3), coap_is_bcast(3), coap_is_mcast(3), coap_is_af_unix(3)
- Work with CoAP Socket Address Types
- coap_supported(3), coap_af_unix_is_supported(3), coap_async_is_supported(3), coap_client_is_supported(3), coap_dtls_is_supported(3), coap_dtls_cid_is_supported(3), coap_dtls_psk_is_supported(3), coap_dtls_pki_is_supported(3), coap_dtls_pkcs11_is_supported(3), coap_dtls_rpk_is_supported(3), coap_epoll_is_supported(3), coap_ipv4_is_supported(3), coap_ipv6_is_supported(3), coap_observe_persist_is_supported(3), coap_oscore_is_supported(3), coap_proxy_is_supported(3), coap_server_is_supported(3), coap_tcp_is_supported(3), coap_threadsafe_is_supported(3), coap_tls_is_supported(3), coap_ws_is_supported(3), coap_wss_is_supported(3)
- Work with CoAP runtime functionality
- collectd-unixsock(5)
- Documentation of collectd's "unixsock plugin"
- corsix-th(6)
- An open source implementation of Theme Hospital
- count_fopen(3)
- read a fixed number of bytes from a stream
- crypt_preferred_method(3)
- get the prefix of the preferred hash method
- cverules(1)
- Generate version matching rules for installed software on a Linux / Unix distribution
- cxpm(1)
- Check an XPM (X PixMap) file, versions XPM 1, 2, or 3
- cxxmatrix(1), C++ Matrix(1)
- The Matrix Reloaded in Terminals
- daemonize(1)
- run a program as a Unix daemon
- darkman(1)
- daemon for dark-mode and light-mode transitions on Unix-like desktops
- davix-get(1)
- Download tool based on libdavix
- davix-http(1)
- HTTP query tool based on libdavix
- davix-ls(1)
- Listing tool based on libdavix
- davix-mkdir(1)
- Directory creation tool based on libdavix
- davix-mv(1)
- Rename tool based on libdavix
- davix-put(1)
- Upload tool based on libdavix
- davix-rm(1)
- Deletion tool based on libdavix
- db2x_texixml(1)
- Make Texinfo files from Texi-XML
- deco(1)
- visual shell for UNIX
- demandoc(1)
- emit only text of UNIX manuals
- dfu-prefix(1)
- add, check, or remove special firmware file prefix
- dfu-suffix(1)
- add, check, or remove DFU firmware file suffix
- dgord(1)
- compute sparse matrix orderings of graphs in parallel
- dictfmt_index2suffix(1)
- Creates a .suffix file from a DICTD database .index file
- ding(1)
- dictionary lookup program for Unix
- discard(8)
- Postfix discard mail delivery agent
- dmtxread(1)
- scan Data Matrix barcodes
- dmtxwrite(1)
- create Data Matrix barcodes
- dnsblog(8)
- Postfix DNS allow/denylist logger
- dnsjit.core.thread(3)
- POSIX thread with separate Lua state
- dnsjit.lib.trie(3)
- Prefix-tree data structure which addresses values by strings or byte arrays
- dos2unix(1)
- convert ASCII files from DOS's CR/LF to UNIX's LF
- draw_character_ex(3)
- Draws non transparent pixels of the sprite with a color. Allegro game programming library
- dsc-psl-convert(1)
- Convert Public Suffix List (PSL) to DSC TLD List
- dump-mixers(1)
- dump OSS mixer settings to standard output
- elixir(1)
- The Elixir script runner
- elixirc(1)
- The Elixir compiler
- elpa_cholesky(3)
- do a Cholesky factorization of a real symmetric or complex hermitian matrix
- elpa_eigenvalues(3)
- computes the eigenvalues of a real symmetric or complex hermitian matrix
- elpa_eigenvalues_double(3)
- computes the eigenvalues of a real double-precision symmetric matrix
- elpa_eigenvalues_double_complex(3)
- computes the eigenvalues of a complex double-precision hermitian matrix
- elpa_eigenvalues_float(3)
- computes the eigenvalues of a real single-precision symmetric matrix
- elpa_eigenvalues_float_complex(3)
- computes the eigenvalues of a complex single-precision hermitian matrix
- elpa_eigenvectors(3)
- computes the eigenvalues and (part of) the eigenvector spectrum for a real symmetric or complex hermitian matrix
- elpa_eigenvectors_double(3)
- computes the eigenvalues and (part of) the eigenvector spectrum for a real symmetric matrix
- elpa_eigenvectors_double_complex(3)
- computes the eigenvalues and (part of) the eigenvector spectrum for a complex hermitian matrix
- elpa_eigenvectors_float(3)
- computes the eigenvalues and (part of) the eigenvector spectrum for a real symmetric matrix
- elpa_eigenvectors_float_complex(3)
- computes the eigenvalues and (part of) the eigenvector spectrum for a complex hermitian matrix
- elpa_generalized_eigenvectors(3)
- computes the generalized eigenvalues and (part of) the eigenvector spectrum for a real symmetric or complex hermitian matrix
- elpa_invert_triangular(3)
- Invert an upper triangular matrix
- elpa_skew_eigenvalues(3)
- computes the eigenvalues of a real skew-symmetric matrix
- elpa_skew_eigenvectors(3)
- computes the eigenvalues and (part of) the eigenvector spectrum for a real skew-symmetric matrix
- elpa_solve_tridiagonal(3)
- computes the eigenvalue problem for real symmetric tridiagonal matrix
- epic(1)
- Internet Relay Chat client for UNIX like systems
- epic5(1)
- Internet Relay Chat client for UNIX like systems
- epix(1), ePiX(1)
- Utilities for creating mathematically accurate figures
- epstool(1)
- Edit preview images and fix bounding boxes in EPS files
- error(8)
- Postfix error/retry mail delivery agent
- exfixed(3)
- Using fixed point maths. Allegro game programming library
- expect_multixterm(1), multixterm(1)
- drive multiple xterms separately or together
- ext_unix_group_acl(8)
- Squid UNIX Group ACL helper
- extruec(3)
- Truecolor pixel format conversions. Allegro game programming library
- fasta36(1)
- scan a protein or DNA sequence library for similar sequences fastx36 - compare a DNA sequence to a protein sequence database, comparing the translated DNA sequence in forward and reverse frames. tfastx36 - compare a protein sequence to a DNA sequence database, calculating similarities with frameshifts to the forward and reverse orientations. fasty36 - compare a DNA sequence to a protein sequence database, comparing the translated DNA sequence in forward and reverse frames. tfasty36 - compare a protein sequence to a DNA sequence database, calculating similarities with frameshifts to the forward and reverse orientations. fasts36 - compare unordered peptides to a protein sequence database fastm36 - compare ordered peptides (or short DNA sequences) to a protein (DNA) sequence database tfasts36 - compare unordered peptides to a translated DNA sequence database fastf36 - compare mixed peptides to a protein sequence database tfastf36 - compare mixed peptides to a translated DNA sequence database ssearch36 - compare a protein or DNA sequence to a sequence database using the Smith-Waterman algorithm. ggsearch36 - compare a protein or DNA sequence to a sequence database using a global alignment (Needleman-Wunsch) glsearch36 - compare a protein or DNA sequence to a sequence database with alignments that are global in the query and local in the database sequence (global-local). lalign36 - produce multiple non-overlapping alignments for protein and DNA sequences using the Huang and Miller sim algorithm for the Waterman-Eggert algorithm. prss36, prfx36 - discontinued; all the FASTA programs will estimate statistical significance using 500 shuffled sequence scores if two sequences are compared
- fastf3(1), fastf3_t(1)
- compare a mixed peptide sequence against a protein database using a modified fasta algorithm. tfastf3, tfastf3_t - compare a mixed pepide sequence against a translated DNA database
- faucet(1)
- a fixture for a BSD network pipe netpipes 4.2
- fbpanel(1)
- a NETWM compliant lightweight GTK2-based panel for UNIX desktop
- fence_xenapi(8)
- Fence agent for Citrix XenServer over XenAPI
- ffmpeg-scaler(1)
- FFmpeg video scaling and pixel format converter
- filter(1)
- Generic UNIX filtering tool
- finepix(4)
- finepix webcamd driver for USB cameras
- fix-mime-charset(1)
- fix incorrect charset specifications in MIME messages
- fix-qdf(1)
- repair PDF files in QDF form after editing
- fix132x43(1)
- fix problems with certain (132 column) graphics modes dump the state of the card as the svgalib chipset driver sees it
- fix_filename_case(3)
- Converts a filename to a standardised case. Allegro game programming library
- fix_filename_slashes(3)
- Converts all the directory separators to a standard character. Allegro game programming library
- fixacos(3)
- Fixed point inverse cosine lookup table. Allegro game programming library
- fixadd(3)
- Safe function to add fixed point numbers clamping overflow. Allegro game programming library
- fixasin(3)
- Fixed point inverse sine lookup table. Allegro game programming library
- fixatan(3)
- Fixed point inverse tangent lookup table. Allegro game programming library
- fixatan2(3)
- Fixed point version of the libc atan2() routine. Allegro game programming library
- fixceil(3)
- Returns the smallest integer not less than x. Allegro game programming library
- fixcos(3)
- Fixed point cosine of binary angles. Allegro game programming library
- fixcrio(1)
- inserts missing CRs at the ends of lines
- fixcvsdiff(1)
- fix problematic diff files
- fixdiv(3)
- Fixed point division. Allegro game programming library
- fixdlsrps(1)
- filter to fix DviLaser/PS documents to work with PSUtils
- fixed(3)
- Fixed point integer to replace floats. Allegro game programming library
- fixfloor(3)
- Returns the greatest integer not greater than x. Allegro game programming library
- fixfmps(1)
- filter to fix Framemaker documents so PSUtils work
- fixhypot(3)
- Fixed point hypotenuse. Allegro game programming library
- fixincludes(1)
- Reduce the number of #includes in KDE source files
- fixmacps(1)
- filter to fix Macintosh documents with saner version of md
- fixmount(8)
- fix remote mount entries
- fixmul(3)
- Multiplies two fixed point values together. Allegro game programming library
- fixparts(8)
- MBR partition table repair utility
- fixproc(1)
- Fixes a process by performing the specified action
- fixps(1)
- sanitize PostScript files
- fixpsditps(1)
- filter to fix Transcript psdit documents so PSUtils work
- fixpspps(1)
- filter to fix PSPrint PostScript so PSUtils work
- fixscribeps(1)
- filter to fix Scribe documents so PSUtils work
- fixsin(3)
- Fixed point sine of binary angles. Allegro game programming library
- fixsqrt(3)
- Fixed point square root. Allegro game programming library
- fixsub(3)
- Safe function to subtract fixed point numbers clamping underflow. Allegro game programming library
- fixtan(3)
- Fixed point tangent of binary angles. Allegro game programming library
- fixtof(3)
- Converts a fixed point to floating point. Allegro game programming library
- fixtoi(3)
- Converts a fixed point to integer with rounding. Allegro game programming library
- fixtorad_r(3)
- Constant to convert angles in fixed point format to radians. Allegro game programming library
- fixtpps(1)
- filter to fix Tpscript documents to work with PSUtils
- fixup_datafile(3)
- Fixes truecolor images in compiled datafiles. Allegro game programming library
- fixwfwps(1)
- filter to fix Word for Windows documents so PSUtils work
- fixwpps(1)
- filter to fix WP documents so PSUtils work
- fixwwps(1)
- filter to fix Windows Write documents so PSUtils work
- flruler(1)
- a simple onscreen pixel measuring ruler for debugging GUIs
- flush(8)
- Postfix fast flush server
- fondu(1)
- convert Macintosh font files to UNIX font format
- font(3)
- A simple 8x8 fixed size font. Allegro game programming library
- font_has_alpha(3)
- Search all pixels of a font for alpha values. Allegro game programming library
- fsck.minix(8)
- check consistency of Minix filesystem
- fswebcam(1)
- Small and simple webcam for *nix
- ftofix(3)
- Converts a floating point value to fixed point. Allegro game programming library
- fun(6)
- draw pixels accumulating in clusters
- gbasename(1), basename(1)
- strip directory and suffix from filenames
- gbmv(3)
- gbmv: general matrix-vector multiply
- gdal-raster-calc(1)
- Perform pixel-wise calculations on a raster Added in version 3.11
- gdal-raster-pixel-info(1)
- Return information on a pixel of a raster dataset Added in version 3.11
- gdal-vector-geom-make-valid(1)
- Fix validity of geometries of a vector dataset Added in version 3.11
- gdk-pixbuf-csource(1)
- C code generation utility for GdkPixbuf images
- gdk-pixbuf-query-loaders(1)
- GdkPixbuf loader registration utility
- gebal(3)
- gebal: balance matrix
- gelst(3)
- gelst: least squares using QR/LQ with T matrix
- gemm(3)
- gemm: general matrix-matrix multiply
- gemv(3)
- gemv: general matrix-vector multiply
- generic(5)
- Postfix generic table format
- ger(3)
- ger: general matrix rank-1 update
- gesv_driver_grp(3)
- LU: General matrix, driver
- gesv_mixed(3)
- gesv: factor and solve, mixed precision
- get-healpix(1)
- Convert RA,DEC to Which healpix
- get_align_matrix(3)
- Rotates a matrix to align it along specified coordinate vectors. Allegro game programming library
- get_align_matrix_f(3)
- Floating point version of get_align_matrix(). Allegro game programming library
- get_camera_matrix(3)
- Constructs a camera matrix for perspective projection. Allegro game programming library
- get_camera_matrix_f(3)
- Floating point version of get_camera_matrix(). Allegro game programming library
- get_color_depth(3)
- Returns the current pixel color depth. Allegro game programming library
- get_mixer_bits(3)
- Returns the mixer bit depth (8 or 16). Allegro game programming library
- get_mixer_buffer_length(3)
- Returns the number of samples per channel in the mixer buffer. Allegro game programming library
- get_mixer_channels(3)
- Returns the number of output channels. Allegro game programming library
- get_mixer_frequency(3)
- Returns the mixer frequency, in Hz. Allegro game programming library
- get_mixer_quality(3)
- Returns the current mixing quality. Allegro game programming library
- get_mixer_voices(3)
- Returns the number of voices allocated to the mixer. Allegro game programming library
- get_rotation_matrix(3), get_rotation_matrix_f(3)
- Constructs X, Y, Z rotation matrices. Allegro game programming library
- get_scaling_matrix(3), get_scaling_matrix_f(3)
- Constructs a scaling matrix. Allegro game programming library
- get_transformation_matrix(3)
- Constructs X, Y, Z rotation matrices with an angle and scaling. Allegro game programming library
- get_transformation_matrix_f(3)
- Floating point version of get_transformation_matrix(). Allegro game programming library
- get_translation_matrix(3), get_translation_matrix_f(3)
- Constructs a translation matrix. Allegro game programming library
- get_vector_rotation_matrix(3), get_vector_rotation_matrix_f(3)
- Constructs X, Y, Z rotation matrices with an angle. Allegro game programming library
- get_x_rotate_matrix(3), get_x_rotate_matrix_f(3)
- Construct X axis rotation matrices. Allegro game programming library
- get_y_rotate_matrix(3), get_y_rotate_matrix_f(3)
- Construct Y axis rotation matrices. Allegro game programming library
- get_z_rotate_matrix(3), get_z_rotate_matrix_f(3)
- Construct Z axis rotation matrices. Allegro game programming library
- geta32(3)
- Extract the alpha component form a 32-bit pixel format color. Allegro game programming library
- getdns_context_set_append_name(3)
- getdns_context_set_context_update_callback, getdns_context_set_dns_root_servers, getdns_context_set_dns_transport, getdns_context_set_dnssec_trust_anchors, getdns_context_set_dnssec_allowed_skew, getdns_context_set_follow_redirects, getdns_context_set_limit_outstanding_queries, getdns_context_set_namespaces, getdns_context_set_resolution_type, getdns_context_set_suffix, getdns_context_set_timeout, -- getdns context manipulation routines n
- getpixel(3)
- Reads a pixel from a bitmap. Allegro game programming library
- getr(3), getg(3), getb(3), geta(3)
- Extract a color component from the current pixel format. Allegro game programming library
- getr8(3), getg8(3), getb8(3), getr15(3), getg15(3), getb15(3), getr16(3), getg16(3), getb16(3), getr24(3), getg24(3), getb24(3), getr32(3), getg32(3), getb32(3)
- Extract a color component from the specified pixel format. Allegro game programming library
- getr_depth(3), getg_depth(3), getb_depth(3), geta_depth(3)
- Extract a color component from a color in a specified pixel format. Allegro game programming library
- gftp(1)
- file transfer client for *NIX based machines
- ggbal(3)
- ggbal: balance matrix
- giffix(1)
- attempt to fix up broken GIFs
- giftext(1)
- dump GIF pixels and metadata as text
- git-mailsplit(1)
- Simple UNIX mbox splitter program
- glBlendFunc(3), "glBlendFunc(3)
- specify pixel arithmetic
- glCopyPixels(3), "glCopyPixels(3)
- copy pixels in the frame buffer
- glCopyTexImage1D(3), "glCopyTexImage1D(3)
- copy pixels into a 1D texture image
- glCopyTexImage2D(3), "glCopyTexImage2D(3)
- copy pixels into a 2D texture image
- glDrawPixels(3), "glDrawPixels(3)
- write a block of pixels to the frame buffer
- glFrustum(3), "glFrustum(3)
- multiply the current matrix by a perspective matrix
- glLoadIdentity(3), "glLoadIdentity(3)
- replace the current matrix with the identity matrix
- glLogicOp(3), "glLogicOp(3)
- specify a logical pixel operation for color index rendering
- glMatrixMode(3), "glMatrixMode(3)
- specify which matrix is the current matrix
- glOrtho(3), "glOrtho(3)
- multiply the current matrix with an orthographic matrix
- glPixelZoom(3), "glPixelZoom(3)
- specify the pixel zoom factors
- glReadBuffer(3), "glReadBuffer(3)
- select a color buffer source for pixels
- glReadPixels(3), "glReadPixels(3)
- read a block of pixels from the frame buffer
- glXCreateGLXPixmap(3), "glXCreateGLXPixmap(3)
- create an off-screen GLX rendering area
- glXDestroyGLXPixmap(3), "glXDestroyGLXPixmap(3)
- destroy a GLX pixmap
- glXMakeCurrent(3), "glXMakeCurrent(3)
- attach a GLX context to a window or a GLX pixmap
- gl_expandfont(3)
- expand a packed pixel font
- gl_font8x8(3)
- a packed 8x8 pixel font
- gl_getbox(3)
- copy a rectangular pixmap from the screen to a buffer
- gl_getpixel(3)
- return the color of a pixel
- gl_getpixelrgb(3)
- store color components of a pixel
- gl_putbox(3)
- copy a pixmap to a rectangular area
- gl_putboxmask(3)
- copy a masked pixmap to a rectangular area
- gl_putboxmaskcompiled(3)
- copy a compiled masked pixmap to a rectangular area
- gl_putboxpart(3)
- copy a partial pixmap to a rectangular area
- gl_rgbcolor(3)
- return pixel value corresponding to an rgb color
- gl_scalebox(3)
- scale a pixmap
- gl_setpixel(3), gl_setpixelrgb(3)
- draw a pixel
- gl_swtriangle(3)
- draw a solid pixmap mapped on a triangle
- gl_wtriangle(3)
- draw a shadowed pixmap mapped on a triangle
- glmatrix(6)
- simulates the title sequence effect of the movie
- gluOrtho2D(3), "gluOrtho2D(3)
- define a 2D orthographic projection matrix
- gluPerspective(3), "gluPerspective(3)
- set up a perspective projection matrix
- gluPickMatrix(3), "gluPickMatrix(3)
- define a picking region
- gmx-covar(1)
- Calculate and diagonalize the covariance matrix
- gmx-enemat(1)
- Extract an energy matrix from an energy file
- gmx-helix(1)
- Calculate basic properties of alpha helices
- gmx-helixorient(1)
- Calculate local pitch/bending/rotation/orientation inside helices
- gmx-rotmat(1)
- Plot the rotation matrix for fitting to a reference structure
- gmx-xpm2ps(1)
- Convert XPM (XPixelMap) matrices to postscript or XPM
- gnutls_x509_privkey_fix(3)
- API function
- gopass(1)
- The standard Unix password manager
- gord(1)
- compute sparse matrix orderings of graphs
- gotst(1), gomtst(1)
- compute statistics on sparse matrix orderings
- gp8psk(4)
- webcamd driver for GENPIX DVB-S
- grabc(1)
- A tool to identify a pixel color of an X Window
- gram2sapixml.pl(1)
- convert Julius grammar to SAPI XML grammar format
- greyfix(8)
- A greylisting policy daemon for Postfix
- gsymfix(1)
- automatically fix common issues with gEDA symbols
- gtmixer(1)
- graphical set/display soundcard mixer values
- gui_strlen(3)
- Returns the length of a string in pixels. Allegro game programming library
- hbmv(3)
- {hb,sb}mv: Hermitian/symmetric matrix-vector multiply
- header_checks(5)
- Postfix built-in content inspection
- helix(6)
- draw helical string-art patterns
- hemm(3)
- {he,sy}mm: Hermitian/symmetric matrix-matrix multiply
- hemv(3)
- {he,sy}mv: Hermitian/symmetric matrix-vector multiply ([cz]symv in LAPACK)
- hesv_driver_grp(3)
- LDL: Hermitian/symmetric indefinite matrix, driver
- hpmv(3)
- {hp,sp}mv: Hermitian/symmetric matrix-vector multiply
- hpsplit(1)
- Split a list of FITS tables into healpix tiles
- hunspell(5)
- format of Hunspell dictionaries and affix files
- hxunxmlns(1)
- replace XML "global names" by Namespace prefixes
- hxxmlns(1)
- replace XML Namespace prefixes by "global names"
- hypermail(1)
- convert mail archives in UNIX box format to HTML pages
- iamb(1)
- a terminal-based client for Matrix for the Vim addict
- identity_matrix(3), identity_matrix_f(3)
- Global containing the identity matrix. Allegro game programming library
- iex(1)
- The Elixir shell
- img-pixmap(n)
- Img, Pixmap Image type (pixmap)
- img-ppm(n)
- Img, Portable Pixmap format (ppm)
- img-xpm(n)
- Img, X Windows Pixmap Format (xpm)
- img2sixel(1)
- image converter to DEC SIXEL graphics
- interbench(8)
- -benchmark application designed to benchmark interactivity in Unix-like systems
- ipfixDump(1)
- Print contents of an IPFIX file as human-readable text
- ipfixcol2-anonymization-inter(7)
- Anonymization (intermediate plugin)
- ipfixcol2-dummy-output(7)
- Dummy (output plugin)
- ipfixcol2-fds-input(7)
- FDS File (input plugin)
- ipfixcol2-fds-output(7)
- Flow Data Storage (output plugin)
- ipfixcol2-filter-inter(7)
- Filter (intermediate plugin)
- ipfixcol2-forwarder-output(7)
- Forwarder (output plugin)
- ipfixcol2-ipfix-input(7)
- IPFIX File (input plugin)
- ipfixcol2-ipfix-output(7)
- IPFIX (output plugin)
- ipfixcol2-json-output(7)
- JSON (output plugin)
- ipfixcol2-tcp-input(7)
- TCP (input plugin)
- ipfixcol2-timecheck-output(7)
- Time Check (output plugin)
- ipfixcol2-udp-input(7)
- UDP (input plugin)
- ipfixcol2-viewer-output(7)
- Viewer (output plugin)
- ipv6gen(1)
- IPv6 prefix generator
- irssi(1), Irssi(1)
- a modular IRC client for UNIX
- irw(1)
- sends data from Unix domain socket to stdout
- isql(1), iusql(1)
- unixODBC interactive SQL command-line tools
- itofix(3)
- Converts an integer to fixed point. Allegro game programming library
- ixgbe(4)
- Intel® Ethernet Driver for the FreeBSD* operating system
- ixpc(1)
- ixp client
- jaildaemon(1)
- A fixed command-line interface for FreeBSD jails to their host system
- kcgixml(3)
- XML output for kcgi
- kermit(1)
- C(hyKermit 10.0: transport(hy and platform(hyindependent interactive and scriptable communications software. This document is intended to give the beginner sufficient information to make basic use of C(hyKermit 10.0. Although it might be rather long for a Unix manual page, it's still far shorter than the C(hyKermit manual, which should be consulted for advanced topics such as customization, character(hysets, scripting, etc. We also attempt to provide a clear structural overview of C(hyKermit's many capabilities, functional areas, states, and modes and their interrelation, that should be helpful to beginners and veterans alike, as well as to those upgrading to version 10.0 from earlier releases. This document is also available as a Web page at: https://kermitproject.org/ckututor.html
- keychain(1)
- Manager for ssh-agent, gpg-agent and private keys. Compatible with POSIX systems
- kiwix-compile-i18n(1)
- helper to compile Kiwix i18n (internationalization) data
- kiwix-compile-resources(1)
- helper to compile and generate some Kiwix resources
- kiwix-manage(1)
- Kiwix Library Manager
- kiwix-search(1)
- find articles using a fulltext search pattern
- kiwix-serve(1)
- Kiwix HTTP Server
- krb5_get_default_principal(3), krb5_principal(3), krb5_build_principal(3), krb5_build_principal_ext(3), krb5_build_principal_va(3), krb5_build_principal_va_ext(3), krb5_copy_principal(3), krb5_free_principal(3), krb5_make_principal(3), krb5_parse_name(3), krb5_parse_name_flags(3), krb5_parse_nametype(3), krb5_princ_set_realm(3), krb5_principal_compare(3), krb5_principal_compare_any_realm(3), krb5_principal_get_comp_string(3), krb5_principal_get_realm(3), krb5_principal_get_type(3), krb5_principal_match(3), krb5_principal_set_type(3), krb5_realm_compare(3), krb5_sname_to_principal(3), krb5_sock_to_principal(3), krb5_unparse_name(3), krb5_unparse_name_flags(3), krb5_unparse_name_fixed(3), krb5_unparse_name_fixed_flags(3), krb5_unparse_name_fixed_short(3), krb5_unparse_name_short(3)
- Kerberos 5 principal handling functions
- krb5_get_init_creds(3), krb5_get_init_creds_keytab(3), krb5_get_init_creds_opt(3), krb5_get_init_creds_opt_alloc(3), krb5_get_init_creds_opt_free(3), krb5_get_init_creds_opt_init(3), krb5_get_init_creds_opt_set_address_list(3), krb5_get_init_creds_opt_set_addressless(3), krb5_get_init_creds_opt_set_anonymous(3), krb5_get_init_creds_opt_set_default_flags(3), krb5_get_init_creds_opt_set_etype_list(3), krb5_get_init_creds_opt_set_forwardable(3), krb5_get_init_creds_opt_set_pa_password(3), krb5_get_init_creds_opt_set_paq_request(3), krb5_get_init_creds_opt_set_preauth_list(3), krb5_get_init_creds_opt_set_proxiable(3), krb5_get_init_creds_opt_set_renew_life(3), krb5_get_init_creds_opt_set_salt(3), krb5_get_init_creds_opt_set_tkt_life(3), krb5_get_init_creds_opt_set_canonicalize(3), krb5_get_init_creds_opt_set_win2k(3), krb5_get_init_creds_password(3), krb5_prompt(3), krb5_prompter_posix(3)
- Kerberos 5 initial authentication functions
- kxml_close(3)
- close kcgixml context
- kxml_open(3)
- open kcgixml context
- kxml_pop(3)
- close an element scope for kcgixml
- kxml_popall(3)
- close all element scopes for kcgixml
- kxml_prologue(3)
- put XML prologue for kcgixml
- kxml_push(3), kxml_pushattrs(3)
- open an element scope for kcgixml
- kxml_pushnull(3), kxml_pushnullattrs(3)
- write a null element for kcgixml
- kxml_putc(3)
- put character content for kcgixml
- kxml_puts(3)
- put string content for kcgixml
- kxml_write(3)
- put content data for kcgixml
- la_gbamv(3)
- la_gbamv: matrix-vector multiply |A| * |x|, general banded
- la_geamv(3)
- la_geamv: matrix-vector multiply |A| * |x|, general
- la_heamv(3)
- la_heamv: matrix-vector multiply |A| * |x|, Hermitian/symmetric
- lacp2(3)
- lacp2: general matrix, convert real to complex
- lacpy(3)
- lacpy: copy matrix
- lacrm(3)
- lacrm: complex * real matrix-matrix multiply
- lagtm(3)
- lagtm: tridiagonal matrix-matrix multiply
- lalsa(3)
- lalsa: SVD of coefficient matrix, step in gelsd
- langb(3)
- langb: general matrix, banded
- lange(3)
- lange: general matrix
- langt(3)
- langt: general matrix, tridiagonal
- lanhb(3)
- lan{hb,sb}: Hermitian/symmetric matrix, banded
- lanhe(3)
- lan{he,sy}: Hermitian/symmetric matrix
- lanhf(3)
- lan{hf,sf}: Hermitian/symmetric matrix, RFP
- lanhp(3)
- lan{hp,sp}: Hermitian/symmetric matrix, packed
- lanht(3)
- lan{ht,st}: Hermitian/symmetric matrix, tridiagonal
- lantb(3)
- lantb: triangular matrix, banded
- lantp(3)
- lantp: triangular matrix, packed
- lantr(3)
- lantr: triangular matrix
- laqgb(3)
- laqgb: row/col scale matrix
- laqge(3)
- laqge: row/col scale matrix
- laqhb(3)
- laqhb: row/col scale matrix
- laqhe(3)
- laqhe: row/col scale matrix
- laqhp(3)
- laqhp: row/col scale matrix
- larcm(3)
- larcm: real * complex matrix-matrix multiply
- larft(3)
- larft: generate T matrix
- larscl2(3)
- larscl2: reciprocal diagonal scale matrix, A = D^{-1} A
- larzt(3)
- larzt: generate T matrix
- lascl(3)
- lascl: scale matrix
- lascl2(3)
- lascl2: diagonal scale matrix, A = D A
- laset(3)
- laset: set matrix
- lat_unix(8)
- measure interprocess communication latency via UNIX sockets
- lat_unix_connect(8)
- measure interprocess connection latency via UNIX sockets
- ldap_table(5)
- Postfix LDAP client configuration
- ldapaddgroup(1)
- adds a POSIX group entry to LDAP
- ldapaddmachine(1)
- adds a POSIX machine (user$) account to LDAP
- ldapadduser(1)
- adds a POSIX user account to LDAP
- ldapdeletegroup(1)
- deletes a POSIX group account from LDAP
- ldapdeletemachine(1)
- deletes a POSIX machine (user$) account from LDAP
- ldapdeleteuser(1)
- deletes a POSIX user account from LDAP
- ldapfinger(1)
- displays a user/machine/group POSIX account's details
- ldapmodifygroup(1)
- modifies a POSIX group account in LDAP interactively
- ldapmodifymachine(1)
- modifies a POSIX machine account in LDAP interactively
- ldapmodifyuser(1)
- modifies a POSIX user account in LDAP interactively
- ldaprenamegroup(1)
- renames a POSIX group in LDAP
- ldaprenamemachine(1)
- renames a POSIX machine account in LDAP
- ldaprenameuser(1), _ldaprenameuser(1)
- renames a POSIX user account in LDAP
- ldapscripts(5)
- Scripts to manage POSIX accounts in your LDAP directory
- ldapsetpasswd(1)
- modifies a POSIX user account's password in LDAP
- ldapsetprimarygroup(1)
- modifies the gidNumber of a POSIX user or machine account in LDAP (sets a user's primary group in LDAP)
- lepton-symfix(1)
- automatically fix common issues with Lepton EDA symbols
- lfm(1)
- a powerful file manager for the UNIX console
- libdavix(3)
- shared library for HTTP I/O
- libdmtx(3)
- Data Matrix Encoding & Decoding Library 0.7.5
- libowfat_byte_start(3), byte_start(3)
- find out if string b is prefix of string a
- libowfat_case_starts(3), case_starts(3)
- compare prefixes of strings case-insensitively
- libowfat_critbit0_allprefixed(3), critbit0_allprefixed(3)
- search a critbit tree by prefix
- libowfat_io_passfd(3), io_passfd(3)
- pass a file descriptor over a Unix Domain socket
- libowfat_io_pipe(3), io_pipe(3)
- create a Unix pipe
- libowfat_io_receivefd(3), io_receivefd(3)
- receive a file descriptor over a Unix Domain socket
- libowfat_str_start(3), str_start(3)
- compare prefixes of strings
