Skip site
navigation (1)Skip section navigation (2)
FreeBSD Manual Pages
- atopcase(4)
- Apple HID-over-SPI transport driver
- cfumass(4)
- USB device side support for Mass Storage Class Transport
- ibv_rc_pingpong(1)
- simple InfiniBand RC transport test
- ibv_uc_pingpong(1)
- simple InfiniBand UC transport test
- ibv_ud_pingpong(1)
- simple InfiniBand UD transport test
- if_ntb(4)
- Virtual Ethernet interface for Non-Transparent Bridges
- iichid(4)
- I2C HID transport driver
- ismt(4)
- Intel SMBus Message Transport (SMBus 2.0) driver
- ktls(4)
- kernel Transport Layer Security
- kyua-config(1), kyua config(1)
- Inspects the values of the loaded configuration
- ntb(4)
- Non-Transparent Bridge subsystem
- ntb_hw_amd(4)
- AMD Non-Transparent Bridge driver
- ntb_hw_intel(4)
- Intel(R) Non-Transparent Bridge driver
- ntb_hw_plx(4)
- PLX/Avago/Broadcom Non-Transparent Bridge driver
- ntb_transport(4)
- Packet-oriented transport for Non-Transparent Bridges
- own(9), own_send_command(9), own_command_wait(9), own_self_command(9), own_acquire_bus(9), own crc(9), own_release_bus(9), OWN_ACQUIRE_BUS(9), OWN_CRC(9), OWN_RELEASE_BUS(9), OWN_SEND_COMMAND(9)
- Dallas Semiconductor 1-Wire Network and Transport Interface
- pthread_join(3), pthread_peekjoin_np(3), pthread_timedjoin_np(3)
- inspect thread termination state
- rdma_getaddrinfo(3)
- Provides transport independent address translation
- sendmail(8)
- an electronic mail transport agent
- usbhid(4)
- USB HID transport driver
- usfs(4)
- USB device side support for bulk only transport mass storage
- xpt(4)
- CAM transport layer interface
- zpool-history(8)
- inspect command history of ZFS storage pools
- CTLOG_STORE_get0_log_by_id(3)
- Get a Certificate Transparency log from a CTLOG_STORE
- CTLOG_STORE_new_ex(3), CTLOG_STORE_new(3), CTLOG_STORE_free(3), CTLOG_STORE_load_default_file(3), CTLOG_STORE_load_file(3)
- Create and populate a Certificate Transparency log list
- CTLOG_new_ex(3), CTLOG_new(3), CTLOG_new_from_base64(3), CTLOG_new_from_base64_ex(3), CTLOG_free(3), CTLOG_get0_name(3), CTLOG_get0_log_id(3), CTLOG_get0_public_key(3)
- encapsulates information about a Certificate Transparency log
- CT_POLICY_EVAL_CTX_new_ex(3), CT_POLICY_EVAL_CTX_new(3), CT_POLICY_EVAL_CTX_free(3), CT_POLICY_EVAL_CTX_get0_cert(3), CT_POLICY_EVAL_CTX_set1_cert(3), CT_POLICY_EVAL_CTX_get0_issuer(3), CT_POLICY_EVAL_CTX_set1_issuer(3), CT_POLICY_EVAL_CTX_get0_log_store(3), CT_POLICY_EVAL_CTX_set_shared_CTLOG_STORE(3), CT_POLICY_EVAL_CTX_get_time(3), CT_POLICY_EVAL_CTX_set_time(3)
- Encapsulates the data required to evaluate whether SCTs meet a Certificate Transparency policy
- EVP_CIPHER_CTX_get_cipher_data(3), EVP_CIPHER_CTX_set_cipher_data(3)
- Routines to inspect and modify EVP_CIPHER_CTX objects
- EVP_CIPHER_CTX_get_original_iv(3), EVP_CIPHER_CTX_get_updated_iv(3), EVP_CIPHER_CTX_iv(3), EVP_CIPHER_CTX_original_iv(3), EVP_CIPHER_CTX_iv_noconst(3)
- Routines to inspect EVP_CIPHER_CTX IV data
- SCT_new(3), SCT_new_from_base64(3), SCT_free(3), SCT_LIST_free(3), SCT_get_version(3), SCT_set_version(3), SCT_get_log_entry_type(3), SCT_set_log_entry_type(3), SCT_get0_log_id(3), SCT_set0_log_id(3), SCT_set1_log_id(3), SCT_get_timestamp(3), SCT_set_timestamp(3), SCT_get_signature_nid(3), SCT_set_signature_nid(3), SCT_get0_signature(3), SCT_set0_signature(3), SCT_set1_signature(3), SCT_get0_extensions(3), SCT_set0_extensions(3), SCT_set1_extensions(3), SCT_get_source(3), SCT_set_source(3)
- A Certificate Transparency Signed Certificate Timestamp
- SSL_CTX_set_default_ctlog_list_file(3), SSL_CTX_set_ctlog_list_file(3)
- load a Certificate Transparency log list from a file
- ct(7)
- Certificate Transparency
- ssl_ct_validation_cb(3), SSL_enable_ct(3), SSL_CTX_enable_ct(3), SSL_disable_ct(3), SSL_CTX_disable_ct(3), SSL_set_ct_validation_callback(3), SSL_CTX_set_ct_validation_callback(3), SSL_ct_is_enabled(3), SSL_CTX_ct_is_enabled(3)
- control Certificate Transparency policy
- Ast_iterator(3o)
- Ast_iterator.iterator enables AST inspection using open recursion
- BN_set_flags(3), BN_get_flags(3)
- enable and inspect flags on BIGNUM objects
- BN_set_negative(3), BN_is_negative(3)
- change and inspect the sign of a BIGNUM
- CTLOG_STORE_get0_log_by_id(3)
- Get a Certificate Transparency log from a CTLOG_STORE
- CTLOG_STORE_get0_log_by_id(3ossl)
- Get a Certificate Transparency log from a CTLOG_STORE
- CTLOG_STORE_new(3), CTLOG_STORE_free(3), CTLOG_STORE_load_default_file(3), CTLOG_STORE_load_file(3)
- Create and populate a Certificate Transparency log list
- CTLOG_STORE_new_ex(3ossl), CTLOG_STORE_new(3ossl), CTLOG_STORE_free(3ossl), CTLOG_STORE_load_default_file(3ossl), CTLOG_STORE_load_file(3ossl)
- Create and populate a Certificate Transparency log list
- CTLOG_new(3), CTLOG_new_from_base64(3), CTLOG_free(3), CTLOG_get0_name(3), CTLOG_get0_log_id(3), CTLOG_get0_public_key(3)
- encapsulates information about a Certificate Transparency log
- CTLOG_new_ex(3ossl), CTLOG_new(3ossl), CTLOG_new_from_base64(3ossl), CTLOG_new_from_base64_ex(3ossl), CTLOG_free(3ossl), CTLOG_get0_name(3ossl), CTLOG_get0_log_id(3ossl), CTLOG_get0_public_key(3ossl)
- encapsulates information about a Certificate Transparency log
- CT_POLICY_EVAL_CTX_new(3), CT_POLICY_EVAL_CTX_free(3), CT_POLICY_EVAL_CTX_get0_cert(3), CT_POLICY_EVAL_CTX_set1_cert(3), CT_POLICY_EVAL_CTX_get0_issuer(3), CT_POLICY_EVAL_CTX_set1_issuer(3), CT_POLICY_EVAL_CTX_get0_log_store(3), CT_POLICY_EVAL_CTX_set_shared_CTLOG_STORE(3), CT_POLICY_EVAL_CTX_get_time(3), CT_POLICY_EVAL_CTX_set_time(3)
- Encapsulates the data required to evaluate whether SCTs meet a Certificate Transparency policy
- CT_POLICY_EVAL_CTX_new_ex(3ossl), CT_POLICY_EVAL_CTX_new(3ossl), CT_POLICY_EVAL_CTX_free(3ossl), CT_POLICY_EVAL_CTX_get0_cert(3ossl), CT_POLICY_EVAL_CTX_set1_cert(3ossl), CT_POLICY_EVAL_CTX_get0_issuer(3ossl), CT_POLICY_EVAL_CTX_set1_issuer(3ossl), CT_POLICY_EVAL_CTX_get0_log_store(3ossl), CT_POLICY_EVAL_CTX_set_shared_CTLOG_STORE(3ossl), CT_POLICY_EVAL_CTX_get_time(3ossl), CT_POLICY_EVAL_CTX_set_time(3ossl)
- Encapsulates the data required to evaluate whether SCTs meet a Certificate Transparency policy
- CURLOPT_RTSP_TRANSPORT(3)
- RTSP Transport: header
- CamlinternalMenhirLib.IncrementalEngine.INSPECTION(3o)
- no description
- CamlinternalMenhirLib.InspectionTableFormat(3o)
- no description
- CamlinternalMenhirLib.InspectionTableFormat.TABLES(3o)
- no description
- CamlinternalMenhirLib.InspectionTableInterpreter(3o)
- no description
- CamlinternalMenhirLib.InspectionTableInterpreter.Make(3o)
- no description
- CamlinternalMenhirLib.InspectionTableInterpreter.Symbols(3o)
- no description
- Dpkg::Compression::FileHandle(3perl)
- object dealing transparently with file compression
- EVP_CIPHER_CTX_get_cipher_data(3), EVP_CIPHER_CTX_set_cipher_data(3)
- Routines to inspect and modify EVP_CIPHER_CTX objects
- EVP_CIPHER_CTX_get_cipher_data(3ossl), EVP_CIPHER_CTX_set_cipher_data(3ossl)
- Routines to inspect and modify EVP_CIPHER_CTX objects
- EVP_CIPHER_CTX_get_original_iv(3ossl), EVP_CIPHER_CTX_get_updated_iv(3ossl), EVP_CIPHER_CTX_iv(3ossl), EVP_CIPHER_CTX_original_iv(3ossl), EVP_CIPHER_CTX_iv_noconst(3ossl)
- Routines to inspect EVP_CIPHER_CTX IV data
- EVP_MD_nid(3), EVP_MD_type(3), EVP_MD_CTX_type(3), EVP_MD_name(3), EVP_MD_size(3), EVP_MD_CTX_size(3), EVP_MD_block_size(3), EVP_MD_CTX_block_size(3), EVP_MD_flags(3), EVP_MD_pkey_type(3)
- inspect EVP_MD objects
- EVP_PKEY_CTX_get_operation(3), EVP_PKEY_CTX_get0_pkey(3)
- inspect EVP_PKEY_CTX objects
- OSSL_FUNC_SSL_QUIC_TLS_crypto_send_fn(3ossl), OSSL_FUNC_SSL_QUIC_TLS_crypto_recv_rcd_fn(3ossl), OSSL_FUNC_SSL_QUIC_TLS_crypto_release_rcd_fn(3ossl), OSSL_FUNC_SSL_QUIC_TLS_yield_secret_fn(3ossl), OSSL_FUNC_SSL_QUIC_TLS_got_transport_params_fn(3ossl), OSSL_FUNC_SSL_QUIC_TLS_alert_fn(3ossl), SSL_set_quic_tls_cbs(3ossl), SSL_set_quic_tls_transport_params(3ossl), SSL_set_quic_tls_early_data_enabled(3ossl)
- Use the OpenSSL TLS implementation for a third party QUIC implementation
- PKCS8_pkey_set0(3), PKCS8_pkey_get0(3), PKCS8_pkey_add1_attr_by_NID(3), PKCS8_pkey_get0_attrs(3)
- change and inspect PKCS#8 PrivateKeyInfo objects
- Printexc(3o)
- Facilities for printing exceptions and inspecting current call stack
- SCT_new(3), SCT_new_from_base64(3), SCT_free(3), SCT_LIST_free(3), SCT_get_version(3), SCT_set_version(3), SCT_get_log_entry_type(3), SCT_set_log_entry_type(3), SCT_get0_log_id(3), SCT_set0_log_id(3), SCT_set1_log_id(3), SCT_get_timestamp(3), SCT_set_timestamp(3), SCT_get_signature_nid(3), SCT_set_signature_nid(3), SCT_get0_signature(3), SCT_set0_signature(3), SCT_set1_signature(3), SCT_get0_extensions(3), SCT_set0_extensions(3), SCT_set1_extensions(3), SCT_get_source(3), SCT_set_source(3)
- A Certificate Transparency Signed Certificate Timestamp
- SCT_new(3ossl), SCT_new_from_base64(3ossl), SCT_free(3ossl), SCT_LIST_free(3ossl), SCT_get_version(3ossl), SCT_set_version(3ossl), SCT_get_log_entry_type(3ossl), SCT_set_log_entry_type(3ossl), SCT_get0_log_id(3ossl), SCT_set0_log_id(3ossl), SCT_set1_log_id(3ossl), SCT_get_timestamp(3ossl), SCT_set_timestamp(3ossl), SCT_get_signature_nid(3ossl), SCT_set_signature_nid(3ossl), SCT_get0_signature(3ossl), SCT_set0_signature(3ossl), SCT_set1_signature(3ossl), SCT_get0_extensions(3ossl), SCT_set0_extensions(3ossl), SCT_set1_extensions(3ossl), SCT_get_source(3ossl), SCT_set_source(3ossl)
- A Certificate Transparency Signed Certificate Timestamp
- SDL_SetColorKey(3)
- Sets the color key (transparent pixel) in a blittable surface and RLE acceleration
- SPI_getnspname(3)
- return the namespace of the specified relation
- SSL_CTX_set_default_ctlog_list_file(3), SSL_CTX_set_ctlog_list_file(3)
- load a Certificate Transparency log list from a file
- SSL_CTX_set_default_ctlog_list_file(3ossl), SSL_CTX_set_ctlog_list_file(3ossl)
- load a Certificate Transparency log list from a file
- SSL_QUIC_METHOD(3ossl), OSSL_ENCRYPTION_LEVEL(3ossl), SSL_CTX_set_quic_method(3ossl), SSL_set_quic_method(3ossl), SSL_set_quic_transport_params(3ossl), SSL_get_peer_quic_transport_params(3ossl), SSL_quic_max_handshake_flight_len(3ossl), SSL_quic_read_level(3ossl), SSL_quic_write_level(3ossl), SSL_provide_quic_data(3ossl), SSL_process_quic_post_handshake(3ossl), SSL_is_quic(3ossl), SSL_get_peer_quic_transport_version(3ossl), SSL_get_quic_transport_version(3ossl), SSL_set_quic_transport_version(3ossl), SSL_set_quic_use_legacy_codepoint(3ossl), SSL_set_quic_early_data_enabled(3ossl)
- QUIC support
- SSL_get_conn_close_info(3ossl), SSL_CONN_CLOSE_FLAG_LOCAL(3ossl), SSL_CONN_CLOSE_FLAG_TRANSPORT(3ossl), OSSL_QUIC_ERR_NO_ERROR(3ossl), OSSL_QUIC_ERR_INTERNAL_ERROR(3ossl), OSSL_QUIC_ERR_CONNECTION_REFUSED(3ossl), OSSL_QUIC_ERR_FLOW_CONTROL_ERROR(3ossl), OSSL_QUIC_ERR_STREAM_LIMIT_ERROR(3ossl), OSSL_QUIC_ERR_STREAM_STATE_ERROR(3ossl), OSSL_QUIC_ERR_FINAL_SIZE_ERROR(3ossl), OSSL_QUIC_ERR_FRAME_ENCODING_ERROR(3ossl), OSSL_QUIC_ERR_TRANSPORT_PARAMETER_ERROR(3ossl), OSSL_QUIC_ERR_CONNECTION_ID_LIMIT_ERROR(3ossl), OSSL_QUIC_ERR_PROTOCOL_VIOLATION(3ossl), OSSL_QUIC_ERR_INVALID_TOKEN(3ossl), OSSL_QUIC_ERR_APPLICATION_ERROR(3ossl), OSSL_QUIC_ERR_CRYPTO_BUFFER_EXCEEDED(3ossl), OSSL_QUIC_ERR_KEY_UPDATE_ERROR(3ossl), OSSL_QUIC_ERR_AEAD_LIMIT_REACHED(3ossl), OSSL_QUIC_ERR_NO_VIABLE_PATH(3ossl), OSSL_QUIC_ERR_CRYPTO_ERR_BEGIN(3ossl), OSSL_QUIC_ERR_CRYPTO_ERR_END(3ossl), OSSL_QUIC_ERR_CRYPTO_ERR(3ossl), OSSL_QUIC_LOCAL_ERR_IDLE_TIMEOUT(3ossl)
- get information about why a QUIC connection was closed
- X(7)
- a portable, network-transparent window system
- XkbKeyActionsPtr(3)
- Returns a pointer to the two-dimensional array of key actions associated with the key corresponding to keycode
- aemt(1), aegis make transparent(1)
- make branch file transparent
- aemtu(1), aegis make transparent undo(1)
- no longer make branch file transparent
- al_transpose_transform(3)
- Allegro 5 API
- antinspect(6)
- ant model inspection screenhack
- arxsavetool(1)
- Inspect and modify Arx Libertatis save files
- augmatch(1)
- inspect and match contents of configuration files
- augtool(1)
- inspect and modify configuration files
- bemenu(1)
- dynamic menu inspired by dmenu(1)
- blind-transpose(1)
- Transpose a video
- blockattack(6)
- a puzzle game inspired by Tetris Attack
- buildah-inspect(1)
- Display information about working containers or images or manifest lists
- buildah-manifest-inspect(1)
- Display a manifest list or image index
- cbc-subdoc(1)
- Interactively Inspect Document Using Subdocument API
- clfdomainsplit(1)
- split Common-Log Format web logs based on domain name
- containers-transports(5)
- description of supported transports for copying and storing container images
- coredns-whoami(7), whoami(7)
- returns your resolver's local IP address, port and transport
- ct(7)
- Certificate Transparency
- ct(7ossl)
- Certificate Transparency
- dbmail-lmtpd(8)
- receive messages from an MTA supporting the Lightweight Mail Transport Protocol, as specified in RFC 2033
- dc_descriptor_get_transports(3)
- Gets the transports supported by the given descriptor
- dnsperf(1)
- test the performance of a DNS server
- dnsproxy(1)
- DNS proxy
- doveadm-stats(1)
- Inspect or reset stats
- draw_character_ex(3)
- Draws non transparent pixels of the sprite with a color. Allegro game programming library
- dtrust-tool(1)
- displays information about D-Trust signature cards and remove the transport protection
- dumpdb(1)
- The Freeze database inspector
- dvb-fe-tool(1)
- DVBv5 tool for frontend settings inspect/change
- fido_cbor_info_new(3), fido_cbor_info_free(3), fido_dev_get_cbor_info(3), fido_cbor_info_aaguid_ptr(3), fido_cbor_info_extensions_ptr(3), fido_cbor_info_protocols_ptr(3), fido_cbor_info_transports_ptr(3), fido_cbor_info_versions_ptr(3), fido_cbor_info_options_name_ptr(3), fido_cbor_info_options_value_ptr(3), fido_cbor_info_algorithm_type(3), fido_cbor_info_algorithm_cose(3), fido_cbor_info_algorithm_count(3), fido_cbor_info_certs_name_ptr(3), fido_cbor_info_certs_value_ptr(3), fido_cbor_info_certs_len(3), fido_cbor_info_aaguid_len(3), fido_cbor_info_extensions_len(3), fido_cbor_info_protocols_len(3), fido_cbor_info_transports_len(3), fido_cbor_info_versions_len(3), fido_cbor_info_options_len(3), fido_cbor_info_maxmsgsiz(3), fido_cbor_info_maxcredbloblen(3), fido_cbor_info_maxcredcntlst(3), fido_cbor_info_maxcredidlen(3), fido_cbor_info_maxlargeblob(3), fido_cbor_info_maxrpid_minpinlen(3), fido_cbor_info_minpinlen(3), fido_cbor_info_fwversion(3), fido_cbor_info_uv_attempts(3), fido_cbor_info_uv_modality(3), fido_cbor_info_rk_remaining(3), fido_cbor_info_new_pin_required(3)
- FIDO2 CBOR Info API
- fido_dev_set_io_functions(3), fido_dev_set_sigmask(3), fido_dev_set_timeout(3), fido_dev_set_transport_functions(3), fido_dev_io_handle(3)
- FIDO2 device I/O interface
- fliptext(6)
- draws pages of text whose lines transparently flip around
- font.tk86(n), font(n)
- Create and inspect fonts
- gammaray(1), GammaRay(1)
- Qt-application inspection and manipulation tool
- gcm-inspect(1)
- GNOME Color Manager Inspect Tool
- gensprep(8)
- compile StringPrep data from files filtered by filterRFC3454.pl
- getdns_context_set_append_name(3)
- getdns_context_set_context_update_callback, getdns_context_set_dns_root_servers, getdns_context_set_dns_transport, getdns_context_set_dnssec_trust_anchors, getdns_context_set_dnssec_allowed_skew, getdns_context_set_follow_redirects, getdns_context_set_limit_outstanding_queries, getdns_context_set_namespaces, getdns_context_set_resolution_type, getdns_context_set_suffix, getdns_context_set_timeout, -- getdns context manipulation routines n
- gi-inspect-typelib(1)
- Typelib inspection tool
- git-notes(1)
- Add or inspect object notes
- git-remote-ext(1)
- Bridge smart transport to external command
- git-remote-fd(1)
- Reflect smart transport stream back to caller
- git-submodule(1)
- Initialize, update or inspect submodules
- gnutls_transport_get_int(3)
- API function
- gnutls_transport_get_int2(3)
- API function
- gnutls_transport_get_ptr(3)
- API function
- gnutls_transport_get_ptr2(3)
- API function
- gnutls_transport_is_ktls_enabled(3)
- API function
- gnutls_transport_set_errno(3)
- API function
- gnutls_transport_set_errno_function(3)
- API function
- gnutls_transport_set_fastopen(3)
- API function
- gnutls_transport_set_int(3)
- API function
- gnutls_transport_set_int2(3)
- API function
- gnutls_transport_set_ptr(3)
- API function
- gnutls_transport_set_ptr2(3)
- API function
- gnutls_transport_set_pull_function(3)
- API function
- gnutls_transport_set_pull_timeout_function(3)
- API function
- gnutls_transport_set_push_function(3)
- API function
- gnutls_transport_set_vec_push_function(3)
- API function
- goop(6)
- squishy transparent oil and bubble screenhack
- goto-inspect(1)
- Inspect goto-binaries
- greylite(8)
- transparent greylisting module for mailservers
- grl-inspect-0.3(1), grl-inspect(1)
- show information about Grilo sources and keys
- gsmartcontrol(1), GSmartControl(1)
- Hard disk drive and SSD health inspection tool
- gst-inspect-1.0(1)
- print info about a GStreamer plugin or element
- hare(1)
- compile, run, test, and inspect Hare programs and modules
- hare-cache(1), hare cache(1)
- inspect and manage the build cache
- header_checks(5)
- Postfix built-in content inspection
- heroeslvl(6)
- inspect Heroes' level files
- hunspell(1)
- spell checker, stemmer and morphological analyzer
- hunspell(3)
- spell checking, stemming, morphological generation and analysis
- hunspell(5)
- format of Hunspell dictionaries and affix files
- hxtabletrans(1)
- transpose an HTML or XHTML table
- influx_inspect(1)
- Displays detailed information about InfluxDB data files
- inspircd(1), tInspIRCd(1)
- the stable, high-performance and modular Internet Relay Chat Daemon
- inspircd-testssl(1), tInspIRCd(1)
- the stable, high-performance and modular Internet Relay Chat Daemon
- is_trans_font(3)
- Returns TRUE if a font uses transparency. Allegro game programming library
- jack_transport(1)
- JACK toolkit client for transport control
- kak(1)
- a vim-inspired, selection oriented code editor
- kermit(1)
- C(hyKermit 10.0: transport(hy and platform(hyindependent interactive and scriptable communications software. This document is intended to give the beginner sufficient information to make basic use of C(hyKermit 10.0. Although it might be rather long for a Unix manual page, it's still far shorter than the C(hyKermit manual, which should be consulted for advanced topics such as customization, character(hysets, scripting, etc. We also attempt to provide a clear structural overview of C(hyKermit's many capabilities, functional areas, states, and modes and their interrelation, that should be helpful to beginners and veterans alike, as well as to those upgrading to version 10.0 from earlier releases. This document is also available as a Web page at: https://kermitproject.org/ckututor.html
- knet_get_transport_id_by_name(3)
- Get a transport ID from its name
- knet_get_transport_list(3)
- Get a list of the transports support by this build of knet
- knet_get_transport_name_by_id(3)
- Get a transport name from its ID number
- knet_handle_get_transport_reconnect_interval(3)
- Get the interval between transport attempts to reconnect a failed link
- knet_handle_set_transport_reconnect_interval(3)
- Set the interval between transport attempts to reconnect a failed link
