FreeBSD Manual Pages

home | help

ALTQ(4): alternate queuing of network packets
OF_package_to_path(9): get fully qualified path to a device tree node
bpf(4): Berkeley Packet Filter
bpf(9): Berkeley Packet Filter
divert(4): kernel packet diversion mechanism
ieee80211_radiotap(9): 802.11 device packet capture support
ipf(4): packet filtering kernel interface
ipf(8): alters packet filtering lists for IP packet input and output
ipfilter(4): Introduction to IP packet filtering
ipfstat(8): reports on packet filter statistics and filter list
ipfw(4): IP packet filter and traffic accounting
ipfw(8), dnctl(8): User interface for firewall, traffic shaper, packet scheduler, in-kernel NAT
ipfwpcap(8): copy diverted packets to a file in tcpdump format
ipl(4): IP packet log device
ipmon(8): monitors /dev/ipl for logged packets
libalias(3): packet aliasing library for masquerading and network address translation
mbuf_tags(9): a framework for generic packet attributes
ncurses(3): CRT screen handling and optimization package
netmap(4): a framework for fast packet I/O
ng_bpf(4): Berkeley packet filter netgraph node type
ng_gif_demux(4): demultiplexer for packets from ng_gif(4) nodes
ng_hub(4): packet distribution netgraph node type
ng_macfilter(4): packet filtering netgraph node using ethernet MAC addresses
ng_one2many(4): packet multiplexing netgraph node type
ntb_transport(4): Packet-oriented transport for Non-Transparent Bridges
nvlist_create(9), nvlist_destroy(9), nvlist_error(9), nvlist_set_error(9), nvlist_empty(9), nvlist_flags(9), nvlist_exists(9), nvlist_free(9), nvlist_clone(9), nvlist_dump(9), nvlist_fdump(9), nvlist_size(9), nvlist_pack(9), nvlist_unpack(9), nvlist_send(9), nvlist_recv(9), nvlist_xfer(9), nvlist_in_array(9), nvlist_next(9), nvlist_add(9), nvlist_move(9), nvlist_get(9), nvlist_take(9), nvlist_append(9): library for name/value pairs
pcap(3): Packet Capture library
pcap-filter(7): packet filter syntax
pcap-tstamp(7): packet time stamps in libpcap
pcap_dump(3): write a packet to a capture file
pcap_dump_flush(3): flush to a savefile packets dumped
pcap_dump_open(3), pcap_dump_fopen(3): open a file to which to write packets
pcap_inject(3), pcap_sendpacket(3): transmit a packet
pcap_loop(3), pcap_dispatch(3): process packets from a live capture or savefile
pcap_next_ex(3), pcap_next(3): read the next packet from a pcap_t
pcap_offline_filter(3): check whether a filter matches a packet
pcap_set_timeout(3): set the packet buffer timeout for a not-yet-activated capture handle
pcap_setdirection(3): set the direction for which packets will be captured
pf(4): packet filter
pf.conf(5): packet filter configuration file
pfctl(8): control the packet filter (PF) device
pfil(9), pfil_head_register(9), pfil_head_unregister(9), pfil_link(9), pfil_run_hooks(9): packet filter interface
pflog(4): packet filter logging interface
pflogd(8): packet filter logging daemon
pfsync(4): packet filter state table sychronisation interface
ping(8): send ICMP or ICMPv6 ECHO_REQUEST packets to network hosts
pkg(7): a utility for manipulating packages
pthread_once(3): dynamic package initialization
route(4): kernel packet forwarding database
safexcel(4): Inside Secure SafeXcel-IP-97 security packet engine
spray(8): send many packets to host
traceroute(8): print the route packets take to network host
traceroute6(8): print the route IPv6 packets will take to a network node
ASN1_TYPE_get(3), ASN1_TYPE_set(3), ASN1_TYPE_set1(3), ASN1_TYPE_cmp(3), ASN1_TYPE_unpack_sequence(3), ASN1_TYPE_pack_sequence(3): ASN1_TYPE utility functions
ERR_load_strings(3), ERR_PACK(3), ERR_get_next_error_library(3): load arbitrary error strings
AL_ID(3): Converts four 8 bit values to a packed 32 bit integer ID. Allegro game programming library
ASN1_TYPE_get(3), ASN1_TYPE_set(3), ASN1_TYPE_set1(3), ASN1_TYPE_cmp(3), ASN1_TYPE_unpack_sequence(3), ASN1_TYPE_pack_sequence(3): ASN1_TYPE utility functions
ASN1_TYPE_get(3ossl), ASN1_TYPE_set(3ossl), ASN1_TYPE_set1(3ossl), ASN1_TYPE_cmp(3ossl), ASN1_TYPE_unpack_sequence(3ossl), ASN1_TYPE_pack_sequence(3ossl): ASN1_TYPE utility functions
ASN1_item_pack(3), ASN1_item_unpack(3): pack an ASN.1 object into an ASN1_STRING
BScreate_ctx(3): Create the execution time context for the package
BUILDINFO(5): Makepkg package build information file
CURLOPT_SASL_IR(3): send initial response in first packet
DS2401(3): Silicon Serial Number DS1990A - Serial Number iButton [.]XXXXXXXXXXXX[XX][/[ '" '" Copyright (c) 2003-2004 Paul H Alfille, MD '" (paul.alfille@gmail.com) '" '" Program manual page for the OWFS -- 1-wire filesystem package '" Based on Dallas Semiconductor, Inc's datasheets, and trial and error. '" '" Free for all use. No warranty. None. Use at your own risk. '" address | crc8 | id | locator | r_address | r_id | r_locator | type ]]
Dpkg::Deps(3perl): parse and manipulate dependencies of Debian packages
Dpkg::Deps::KnownFacts(3perl): list of installed real and virtual packages
Dpkg::Source::Package(3perl): manipulate Debian source packages
ERR_load_strings(3), ERR_PACK(3), ERR_get_next_error_library(3): load arbitrary error strings
ERR_load_strings(3ossl), ERR_PACK(3ossl), ERR_get_next_error_library(3ossl): load arbitrary error strings
HPL_dlaswp02N(3): pack rows of A into columns of W
HPL_packL(3): Form the MPI structure for the row ring broadcasts
JAM_DelSubPacket(3): Delete a subfield packet
JAM_GetSubfield(3): Get a subfield from a subfield packet (not reentrant)
JAM_GetSubfield_R(3): Get a subfield from a subfield packet (reentrant)
JAM_NewSubPacket(3): Create a new subfield packet
JAM_PutSubfield(3): Put a subfield into a subfield packet
LZSS_PACK_DATA(3): Opaque structure for handling LZSS compression. Allegro game programming library
LZSS_UNPACK_DATA(3): Opaque structure for handling LZSS decompression. Allegro game programming library
META(5), R META(5): [File that specifies metainformation of OCaml packages]c
MPI_Pack(3): Packs a datatype into contiguous memory
MPI_Pack_external(3): Packs a datatype into contiguous memory, using the external32 format
MPI_Pack_external_size(3): Returns the upper bound on the amount of space needed to pack a message using MPI_Pack_external
MPI_Pack_size(3): Returns the upper bound on the amount of space needed to pack a message
MPI_Unpack(3): Unpack a buffer according to a datatype into contiguous memory
MPI_Unpack_external(3): Unpack a buffer (packed with MPI_Pack_external) according to a datatype into contiguous memory
PACKFILE(3): Packfile structure, similar to the libc FILE structure. Allegro game programming library
PACKFILE_VTABLE(3): Packfile vtable structure, for custom packfiles. Allegro game programming library
PKCS12_pack_p7encdata(3ossl), PKCS12_pack_p7encdata_ex(3ossl): Pack a set of PKCS#12 safeBags into a PKCS#7 encrypted data object
PKGBUILD(5): Arch Linux package build description file
PQputf(3), PQputvf(3): Packs a set of parameters in a PGparam for use with a parameterized query
SNMP(3): The Perl5 'SNMP' Extension Module for the Net-SNMP SNMP package
Smokeping_matchers_ExpLoss(3), Smokeping::matchers::ExpLoss(3): exponential weighting matcher for packet loss with RMON-like thresholds
Tcl_PkgPresent.tcl85(3), Tcl_PkgRequire(3), Tcl_PkgRequireEx(3), Tcl_PkgRequireProc(3), Tcl_PkgPresent(3), Tcl_PkgPresentEx(3), Tcl_PkgProvide(3), Tcl_PkgProvideEx(3): package version control
Tcl_PkgPresent.tcl86(3), Tcl_PkgRequire(3), Tcl_PkgRequireEx(3), Tcl_PkgRequireProc(3), Tcl_PkgPresent(3), Tcl_PkgPresentEx(3), Tcl_PkgProvide(3), Tcl_PkgProvideEx(3): package version control
Tcl_PkgPresent.tcl87(3), Tcl_PkgRequire(3), Tcl_PkgRequireEx(3), Tcl_PkgRequireProc(3), Tcl_PkgPresent(3), Tcl_PkgPresentEx(3), Tcl_PkgProvide(3), Tcl_PkgProvideEx(3): package version control
Tcl_StaticLibrary.tcl87(3), Tcl_StaticLibrary(3), Tcl_StaticPackage(3): make a statically linked library available via the 'load' command
Tcl_StaticPackage.tcl85(3), Tcl_StaticPackage(3): make a statically linked package available via the 'load' command
Tcl_StaticPackage.tcl86(3), Tcl_StaticPackage(3): make a statically linked package available via the 'load' command
Ttk_AddPadding.tk85(3), Ttk_MakeBox(3), Ttk_PadBox(3), Ttk_ExpandBox(3), Ttk_PackBox(3), Ttk_StickBox(3), Ttk_PlaceBox(3), Ttk_BoxContains(3), Ttk_MakePadding(3), Ttk_UniformPadding(3), Ttk_AddPadding(3), Ttk_RelievePadding(3), Ttk_GetPaddingFromObj(3), Ttk_GetBorderFromObj(3), Ttk_GetStickyFromObj(3): Tk themed geometry utilities
Ttk_AddPadding.tk86(3), Ttk_MakeBox(3), Ttk_PadBox(3), Ttk_ExpandBox(3), Ttk_PackBox(3), Ttk_StickBox(3), Ttk_PlaceBox(3), Ttk_BoxContains(3), Ttk_MakePadding(3), Ttk_UniformPadding(3), Ttk_AddPadding(3), Ttk_RelievePadding(3), Ttk_GetPaddingFromObj(3), Ttk_GetBorderFromObj(3), Ttk_GetStickyFromObj(3): Tk themed geometry utilities
abcde(1): Grab an entire CD and compress it to Ogg/Vorbis, MP3, FLAC, Ogg/Speex, AAC, WavPack, Monkey's Audio (ape), MPP/MP+(Musepack), True Audio (tta), MP2 format and/or AIFF (Audio Interchange File Format)
aireplay-ng(8): inject packets into a wireless network to generate traffic
airodump-ng(8): a wireless packet capture tool for aircrack-ng
airventriloquist-ng(8): encrypted WiFi packet injection
amigadepacker(1): Tool for depacking some compressed Amiga formats
apt-cacher-ng(8): caching proxy for software package downloads
atp(1): read, reply, and archive QWK format mail packets
axohelp(1): helper program for use of LaTeX package axodraw2 with pdflatex
balls(l): preprocessor for space-filling models in Raster3D molecular graphics package
bittwist(1): -- pcap based ethernet packet generator
bristol(1): a synthesiser emulation package
cdpd(8): Send CDP/LLDP packets over ethernet
cmake-packages(7): CMake Packages Reference
coap_io(3), coap_io_process(3), coap_io_process_with_fds(3), coap_context_get_coap_fd(3), coap_io_prepare_io(3), coap_io_do_io(3), coap_io_prepare_epoll(3), coap_io_do_epoll(3): Work with CoAP I/O to do the packet send and receives
coap_logging(3), coap_log(3), coap_get_log_level(3), coap_set_log_level(3), coap_set_log_handler(3), coap_package_name(3), coap_package_version(3), coap_set_show_pdu_output(3), coap_show_pdu(3): Work with CoAP logging
coap_recovery(3), coap_session_set_max_retransmit(3), coap_session_set_ack_timeout(3), coap_session_set_ack_random_factor(3), coap_session_get_max_retransmit(3), coap_session_get_ack_timeout(3), coap_session_get_ack_random_factor(3), coap_debug_set_packet_loss(3): Work with CoAP packet transmissions
cookiejar.tcl87(n), cookiejar(n): Implementation of the Tcl http package cookie jar protocol
cpack(1): CPack Command-Line Reference
cpack-generators(7): CPack Generator Reference
create_lzss_pack_data(3): Creates an LZSS structure for compression. Allegro game programming library
create_lzss_unpack_data(3): Creates an LZSS structure for decompression. Allegro game programming library
critcl_apppkg(n), critcl::app(n): Critcl - Application Package Reference
critcl_pkg(n), critcl(n): Critcl - Package Reference
cvsup(1): network distribution package for CVS repositories
deb(5): Debian binary package format
deb-changelog(5): dpkg source packages' changelog file format
deb-conffiles(5): package conffiles
deb-control(5): Debian binary packages' master control file format
deb-old(5): old style Debian binary package format
deb-postinst(5): package post-installation maintainer script
deb-postrm(5): package post-removal maintainer script
deb-preinst(5): package pre-installation maintainer script
deb-prerm(5): package pre-removal maintainer script
deb-split(5): Debian multi-part binary package format
deb-src-control(5): Debian source packages' master control file format
deb-src-rules(5): Debian source package rules file
deb-triggers(5): package triggers
deb-version(7): Debian package version number format
declean(1): clean up after a Debian package build
deltup(1): Update a tarballed package
design_coupler(1): for designing directional couplers (part of the atlc package)
dhcpdump(8): DHCP packet dumper
direwolf(1): Soundcard TNC for packet radio
dnsjit.core.object.ether(3): Ether part of a packet
dnsjit.core.object.gre(3): Generic Routing Encapsulation (GRE) part of a packet
dnsjit.core.object.icmp(3): An ICMP packet
dnsjit.core.object.icmp6(3): An ICMPv6 packet
dnsjit.core.object.ieee802(3): IEEE802 part of a packet
dnsjit.core.object.ip(3): An IP packet
dnsjit.core.object.ip6(3): An IPv6 packet
dnsjit.core.object.linuxsll(3): Linux cooked-mode capture (SLL) part of a packet
dnsjit.core.object.loop(3): OpenBSD loopback encapsulation (loop) part of a packet
dnsjit.core.object.null(3): BSD loopback encapsulation (null) part of a packet
dnsjit.core.object.pcap(3): Container of a packet found in a PCAP
dnsjit.filter.timing(3): Filter to pass objects to the next receiver based on timing between packets
dpkg(1): package manager for Debian
dpkg-architecture(1): set and determine the architecture for package building
dpkg-buildflags(1): returns build flags to use during package build
dpkg-buildpackage(1): build binary or source packages from sources
dpkg-deb(1): Debian package archive (.deb) manipulation tool
dpkg-divert(1): override a package's version of a file
dpkg-name(1): rename Debian packages to full package names
dpkg-scanpackages(1): create Packages index files
dpkg-source(1): Debian source package (.dsc) manipulation tool
dpkg-split(1): Debian package archive split/join tool
dpkg-trigger(1): a package trigger utility
dsc(5): Debian source packages' control file format
dselect(1): Debian package management frontend
dune-install(1), duneN'45'install(1): N'45' Install packagesN'46'
dune-uninstall(1), duneN'45'uninstall(1): N'45' Uninstall packagesN'46'
dvihp(1): convert a TeX DVI file to Hewlett-Packard PCL
edusers(1): edit users list created by package
epm(1): create software packages
expack(1): manipulate Flex files
expackf(3): Using custom PACKFILE vtables. Allegro game programming library
extract_qupak(1): extract Quake/2 PACK files
fastnetmon(1), FastNetMon(1): a high performance DoS/DDoS load analyzer built on top of multiple packet capture engines
flow-export(1): Export flow-tools files into other NetFlow packages
flow-import(1): Import flows into flow-tools from other NetFlow packages
fpart(1): Sort and pack files into partitions
fping(8): send ICMP ECHO_REQUEST packets to network hosts
fppkg(1): The Free Pascal Packages Download program
fragiso(8): split rpm packages from an iso and reassemble the iso later on
free_lzss_pack_data(3): Frees an LZSS structure. Allegro game programming library
free_lzss_unpack_data(3): Frees an LZSS structure. Allegro game programming library
freeciv-modpack(6), freeciv-mp-gtk2(6): freeciv-mp-gtk3, freeciv-mp-qt, freeciv-mp-cli
ftpsesame(8): automagic packet filter configurator for FTP
fwb_pf(1): Policy compiler for OpenBSD packet filter "pf"
gauche-package(1): gauche package builder/manager
gen_packets(1): Generate audio file for AX.25 frames
getstyle(1): dumps the current Window Maker style related configuration or creates a theme pack
gftopk(1): convert generic font files to packed font files
git-count-objects(1): Count unpacked number of objects and their disk consumption
git-fetch-pack(1): Receive missing objects from another repository
git-index-pack(1): Build pack index file for an existing packed archive
git-multi-pack-index(1): Write and verify multi-pack-indexes
git-pack-objects(1): Create a packed archive of objects
git-pack-redundant(1): Find redundant pack files
git-pack-refs(1): Pack heads and tags for efficient repository access
git-prune-packed(1): Remove extra objects that are already in pack files
git-receive-pack(1): Receive what is pushed into the repository
git-repack(1): Pack unpacked objects in a repository
git-send-pack(1): Push objects over Git protocol to another repository
git-show-index(1): Show packed archive index
git-unpack-file(1): Creates a temporary file with a blobs contents
git-unpack-objects(1): Unpack objects from a packed archive
git-upload-pack(1): Send objects packed back to git-fetch-pack
git-verify-pack(1): Validate packed Git archive files
gitformat-pack(5): Git pack format
gitprotocol-pack(5): How packs are transferred over-the-wire
gl_expandfont(3): expand a packed pixel font
gl_font8x8(3): a packed 8x8 pixel font
gnutls_handshake_set_max_packet_length(3): API function
gnutls_packet_deinit(3): API function
gnutls_packet_get(3): API function
gnutls_record_recv_packet(3): API function
gpsmon(1): real-time GPS packet monitor and control utility
groff_trace(7): groff macro package trace.tmac
gst-load(1): test and load packages into a GNU Smalltalk image
gst-package(1): create and install GNU Smalltalk .star package files
gunshar(1), *[B-Font]unshar(1): unpack a gshar archive
gvpack(1): merge and pack disjoint graphs
hdfunpac(1): Unpack an HDF file
hostsearch(1): query several hosts for installed Debian packages
hping3(8): send (almost) arbitrary TCP/IP packets to network hosts
hugo-mod-npm-pack(1): Experimental: Prepares and writes a composite package.json file for your project
icmp6(1): A security assessment tool for attack vectors based on ICMPv6 packets
ifmail(8): Convert RFC-822 and RFC-1036 mail/news to FTN Fidonet packets. ifnews - Convert RFC-1036 Usenet news to FTN Fidonet packets
iftoss(8): Convert Fidonet FTN packets to RFC-822 and RFC-1036 mail/news
intltoolize(8): copy intltool related files to software package
ipack(1): Manipulate Flex files containing Shapes
ipdecap(1): Decapsulate GRE, IPIP, 6in4 and ESP (Ipsec) packets
ipgrab(8): A Verbose Packet Sniffer
joytest(6): test the svgalib joystick package in text mode
knet_handle_compress(3): Set up packet compression
knet_handle_crypto(3): set up packet cryptographic signing & encryption
knet_handle_crypto_set_config(3): set up packet cryptographic signing & encryption
knet_handle_enable_filter(3): install a filter to route packets
knet_handle_setfwd(3): Start packet forwarding
kpackagetool5(1): Install, list, remove Plasma packages
lapack(3): LAPACK
lazbuild(1): The Lazarus project and package build program
ldns-dpa(1), dpa(1): DNS Packet Analyzer. Analyze DNS packets in ip trace files
ldns-update(1): send a dynamic update packet
ldns_pkt(3), ldns_pkt_section(3), ldns_pkt_type(3): request or answer packets types
ldns_pkt_verify(3): verify a packet
ldns_send(3): send a packet
ldns_update_pkt_new(3): create an update packet
ldns_update_set_zocount(3), ldns_update_set_prcount(3), ldns_update_set_upcount(3), ldns_update_set_adcount(3): set the update packet counters
ldns_update_zocount(3), ldns_update_prcount(3), ldns_update_upcount(3), ldns_update_adcount(3): return update packet counters
lft(8): display the route packets take to a network host/socket using one of several layer-4 protocols and methods; optionally show heuristic network information in transitu
libalpm(3): Arch Linux Package Management (ALPM) library
liboping(3): Library to send ICMPv4/ICMPv6 echo packets to multiple hosts
libowfat_dns_ip4_packet(3), dns_ip4_packet(3): extract IPv4 address from DNS answer packet
libowfat_dns_ip6_packet(3), dns_ip6_packet(3): extract IPv6 address from DNS answer packet
libowfat_dns_mx_packet(3), dns_mx_packet(3): extract MX records from DNS answer packet
libowfat_dns_name_packet(3), dns_name_packet(3): extract names from DNS answer packet
libowfat_dns_txt_packet(3), dns_txt_packet(3): extract TXT records from DNS answer packet
libowfat_tai_unpack(3), tai_unpack(3): convert to external TAI64 format
libowfat_taia_unpack(3), taia_unpack(3): convert to external TAI64NA format
libowfat_uint16_pack(3), uint16_pack(3): write an unsigned little-endian 16-bit integer
libowfat_uint16_pack_big(3), uint16_pack_big(3): write an unsigned big-endian 16-bit integer
libowfat_uint16_unpack(3), uint16_unpack(3): read an unsigned little-endian 16-bit integer
libowfat_uint16_unpack_big(3), uint16_unpack_big(3): read an unsigned big-endian 16-bit integer
libowfat_uint32_pack(3), uint32_pack(3): write an unsigned little-endian 32-bit integer
libowfat_uint32_pack_big(3), uint32_pack_big(3): write an unsigned big-endian 32-bit integer
libowfat_uint32_unpack(3), uint32_unpack(3): read an unsigned little-endian 32-bit integer
libowfat_uint32_unpack_big(3), uint32_unpack_big(3): read an unsigned big-endian 32-bit integer
libowfat_uint64_pack(3), uint64_pack(3): write an unsigned little-endian 64-bit integer
libowfat_uint64_pack_big(3), uint64_pack_big(3): write an unsigned big-endian 64-bit integer
libowfat_uint64_unpack(3), uint64_unpack(3): read an unsigned little-endian 64-bit integer
libowfat_uint64_unpack_big(3), uint64_unpack_big(3): read an unsigned big-endian 64-bit integer
lightning-sendonion(7): Send a payment with a custom onion packet
lldpd(8): Send Link Layer Discovery Protocol packets over ethernet
lnpdump(1): Packet monitor for Lego infrared communication
load_bmp_pf(3): Packfile version of load_bmp. Allegro game programming library
load_pcx_pf(3): Packfile version of load_pcx. Allegro game programming library
load_tga_pf(3): Packfile version of load_tga. Allegro game programming library
load_voc_pf(3): Packfile version of load_voc. Allegro game programming library
load_wav_pf(3): Packfile version of load_wav. Allegro game programming library
macpack(1): Macintosh OS X Packager for managed gui assemblies
makepkg(8): package build utility
makepkg-template(1): package build templating utility
manifest(1): import or export a package list
mate-autogen(1): generates all makefiles for MATE packages
maxima(1), Maxima(1): Common Lisp version of MACSYMA symbolic mathematics package released under the GNU Public License rmaxima - A version of Maxima that supports command autocompletion Xmaxima - A graphical version of Maxima
mcxtrace(1): Compiler of the McXrace X-ray trace simulation package
mfsnetdump(8): dump network traffic as mfs packets
mhook(1), rcvdist(1), rcvpack(1), rcvtty (1): MH receive-mail hooks
mirror(1): mirror packages on remote sites
mjoytest(6): test the svgalib joystick package in graphics mode
ml(1): handy command interface to the Modules package
mmail(1), mm(1): offline mail reader for Blue Wave, QWK, OMEN, SOUP and OPX packets
module(1): command interface to the Modules package
modulefile(5): files containing Tcl code for the Modules package rst2man-indent-level 0 1 rstReportMargin \$1
mp4box(1), MP4Box(1): GPAC command-line media packager
mpack(1): pack a file in MIME format
mping(8): send ICMP ECHO_REQUEST packets to multiple network hosts in a round-robbin fashion. Mping support both IPv4 and IPv6 adresses at the same time
mrtg-ping-probe(1): a round trip time and packet loss probe for MRTG
mtr-packet(8): send and receive network probes
munpack(1): unpack messages in MIME or split-uuencode format
mxformat(1): Text data set conversion/merging tool of the McXtrace X-ray trace simulation package
ncurses(3x): CRT screen handling and optimization package
ndrdump(1): DCE/RPC Packet Parser and Dumper
netpipes(1): a package to manipulate BSD TCP/IP stream sockets version 4.2
noffle(1): Usenet package optimized for dialup connections
nping(1): Network packet generation tool / ping utility
ocamlfind(1), R ocamlfind(1): [Command-line interface of the Package manager]c
ocf_heartbeat_IPsrcaddr(7): Manages the preferred source address for outgoing IP packets
oggz-diff(1): Hexdump the packets of two Ogg files and output differences
oggz-dump(1): Hexdump packets of an Ogg file, or revert an Ogg file from such a hexdump
opam(1): N'45' sourceN'45'based package management
opam(1): adminN'45'addN'45'constraint N'45' Adds version constraints on all dependencies towards a given package
opam(1): adminN'45'cache N'45' Fills a local cache of package archives
opam(1): adminN'45'filter N'45' Filters a repository to only keep selected packages
opam(1): adminN'45'list N'45' Lists packages from a repository
opam-config(1), opamN'45'config(1): N'45' Display configuration options for packagesN'46'
opam-install(1), opamN'45'install(1): N'45' Install a list of packagesN'46'
opam-installer(1), opamN'45'installer(1): N'45' Handles (un)installation of package files following instructions from opam *N'46'install filesN'46'
opam-lint(1), opamN'45'lint(1): N'45' Checks and validate package description (N'39'opamN'39') filesN'46'
opam-list(1), opamN'45'list(1): N'45' Display the list of available packagesN'46'
opam-pin(1), opamN'45'pin(1): N'45' Pin a given package to a specific version or sourceN'46'
opam-reinstall(1), opamN'45'reinstall(1): N'45' Reinstall a list of packagesN'46'
opam-remove(1), opamN'45'remove(1): N'45' Remove a list of packagesN'46'
opam-show(1), opamN'45'show(1): N'45' Display information about specific packagesN'46'
opam-source(1), opamN'45'source(1): N'45' Get the source of an opam packageN'46'
opam-update(1), opamN'45'update(1): N'45' Update the list of available packagesN'46'
opam-upgrade(1), opamN'45'upgrade(1): N'45' Upgrade the installed package to latest versionN'46'
opkg-cl(1): command line utility to install, upgrade and uninstall opkg software packages
ovs-pcap(1): print packets from a pcap file as hex
owtap(1): Packet sniffer for the owserver protocol
pack(3), libpack(3): support for connected components
pack-old.tk85(n), pack-old(n): Obsolete syntax for packer geometry manager
pack.tk85(n), pack(n): Geometry manager that packs around edges of cavity
pack.tk86(n), pack(n): Geometry manager that packs around edges of cavity
pack_fclose(3): Closes a stream previously opened. Allegro game programming library
pack_fclose_chunk(3): Closes a previously opened sub-chunk. Allegro game programming library
pack_feof(3): Returns nonzero as soon as you reach the end of the file. Allegro game programming library
pack_ferror(3): Tells if an error occurred during an operation on the stream. Allegro game programming library
pack_fgets(3): Reads a line from the stream. Allegro game programming library
pack_fopen(3): Opens a file according to mode. Allegro game programming library
pack_fopen_chunk(3): Opens a sub-chunk of a file. Allegro game programming library
pack_fopen_vtable(3): Allegro game programming library
pack_fputs(3): Writes a string to the stream. Allegro game programming library
pack_fread(3): Reads n bytes from the stream. Allegro game programming library
pack_fseek(3): Seeks inside a stream. Allegro game programming library
pack_fwrite(3): Writes n bytes to the stream. Allegro game programming library
pack_getc(3): Returns the next character from a stream. Allegro game programming library
pack_igetl(3): Like pack_getc(), but using 32-bit Intel byte ordering words. Allegro game programming library
pack_igetw(3): Like pack_getc(), but using 16-bit Intel byte ordering words. Allegro game programming library
pack_iputl(3): Like pack_putc(), but using 32-bit Intel byte ordering words. Allegro game programming library
pack_iputw(3): Like pack_putc(), but using 16-bit Intel byte ordering words. Allegro game programming library
pack_mgetl(3): Like pack_getc(), but using 32-bit Motorola byte ordering words. Allegro game programming library
pack_mgetw(3): Like pack_getc(), but using 16-bit Motorola byte ordering words. Allegro game programming library
pack_mputl(3): Like pack_putc(), but using 32-bit Motorola byte ordering words. Allegro game programming library
pack_mputw(3): Like pack_putc(), but using 16-bit Motorola byte ordering words. Allegro game programming library
pack_old.tk86(n), pack-old(n): Obsolete syntax for packer geometry manager
pack_putc(3): Puts a character in the stream. Allegro game programming library
pack_ungetc(3): Moves one single character back to the input buffer. Allegro game programming library
package(1): register package user via mailagent
package.tcl85(n), package(n): Facilities for package loading and version control
package.tcl86(n), package(n): Facilities for package loading and version control
package.tcl87(n), package(n): Facilities for package loading and version control
packagens.tcl86(n), pkg::create(n): Construct an appropriate 'package ifneeded' command for a given package specification
packagens.tcl87(n), pkg::create(n): Construct an appropriate 'package ifneeded' command for a given package specification
packetforge-ng(1): forge packets: ARP, UDP, ICMP or custom packets
packf(1): pack messages in nmh folder into a single file
packfile_password(3): Sets the global I/O encryption password. Allegro game programming library
packit(8), Packit(8): network packet generator and capture tool
packlogic-generic(3), packlogic-generic.so(3): Packing logic for the generic site
packlogic-twoway(3), packlogic-twoway.so(3): Packing logic for the twoway site
packmule(1): Creates and packs custom FreeBSD installation images
pacman(8): package manager utility
pacman.conf(5): pacman package manager configuration file
pak(1): The QuakeForge Packfile Tool
pbmtopk(1): convert a PBM image into a packed (PK) format font lbAC
pcap(3): Packet Capture library
pcap-filter(7): packet filter syntax
pcap-tstamp(7): packet time stamps in libpcap
pcap_dump(3): write a packet to a capture file
pcap_dump_flush(3): flush to a savefile packets dumped
pcap_dump_open(3), pcap_dump_open_append(3), pcap_dump_fopen(3): open a file to which to write packets
pcap_inject(3), pcap_sendpacket(3): transmit a packet
pcap_loop(3), pcap_dispatch(3): process packets from a live capture or savefile
pcap_next_ex(3), pcap_next(3): read the next packet from a pcap_t
pcap_offline_filter(3): check whether a filter matches a packet
pcap_set_timeout(3): set the packet buffer timeout for a not-yet-activated capture handle
pcap_setdirection(3): set the direction for which packets will be captured
pdfmom(1): produce PDF documents using the mom macro package for groff
pepack(1): check if a PE file is packed
pfstat(8): collect packet filter statistics and generate graphs
pgp-fixkey(1): -- remove broken packets from keys
picpack(1): PostScript picture packing preprocessor
pkg(8), pkg-static(8): manipulate packages
pkg-add(8), pkg add(8): Registers a package and installs it on the system
pkg-annotate(8), pkg annotate(8): add, modify or delete arbitrary annotations from packages
pkg-audit(8), pkg audit(8): audit installed packages against known vulnerabilities
pkg-autoremove(8), pkg autoremove(8): removes orphan packages
pkg-backup(8), pkg backup(8): backup and restore the local package database
pkg-check(8), pkg check(8): sanity check installed packages
pkg-clean(8), pkg clean(8): clean the local cache of fetched remote packages
pkg-create(8), pkg create(8): a utility for creating software package distributions
pkg-delete(8), pkg delete(8): deletes packages from the database and the system
pkg-fetch(8), pkg fetch(8): fetch remote packages
pkg-info(8), pkg info(8): display information for packages
pkg-install(8), pkg install(8): install packages from remote package repositories or local archives
pkg-lock(8), pkg lock(8), pkg unlock(8): lock or unlock packages
pkg-provides(8), pkg provides(8): query which package provides a file matching a particular pattern
pkg-query(8), pkg query(8): query information for packages
pkg-register(8), pkg register(8): register a package into the local package database
pkg-repo(8), pkg repo(8): create a package repository catalogue
pkg-repository(5), package repository(5): format and operation of package repositories used by pkg(8)
pkg-search(8), pkg search(8): search package repository catalogues
pkg-shlib(8), pkg shlib(8): display which installed package provides a specfic shared library, and the installed packages which require it library is the filename of the library without any leading path, but including the ABI version number. Only exact matches are handled
pkg-ssh(8), pkg ssh(8): package server
pkg-stats(8), pkg stats(8): display package database statistics
pkg-update(8), pkg update(8): update the local catalogues of the enabled package repositories
pkg-updating(8), pkg updating(8): display UPDATING entries of software packages
pkg-upgrade(8), pkg upgrade(8): perform upgrades of package software distributions
pkg-version(8), pkg version(8): summarize installed versions of packages
pkg-which(8), pkg which(8): display which package installed a specific file
pkg::create.tcl85(n), pkg::create(n): Construct an appropriate 'package ifneeded' command for a given package specification
pkgMkIndex.tcl86(n), pkg_mkIndex(n): Build an index for automatic loading of packages
pkgMkIndex.tcl87(n), pkg_mkIndex(n): Build an index for automatic loading of packages
pkg_cleanup(1): deinstall 'leaf' packages
pkg_create(3), pkg_create_i(3), pkg_create_new(3), pkg_create_free(3), pkg_create_set_format(3), pkg_create_set_overwrite(3), pkg_create_set_compression_level(3), pkg_set_rootdir(3), pkg_set_output_dir(3), pkg_create_set_timestamp(3): create packages
pkg_cutleaves(1): deinstall 'leaf' packages
pkg_deinstall(1): a package deinstaller with wildcards and dependency recursion support
pkg_fetch(1): a remote package fetcher
pkg_glob(1): a package glob expander with wildcards and dependency recursion support
pkg_jail(1): Easy handling of a jail for package-builds
pkg_libchk(1): check packages for links against missing libraries
pkg_mkIndex.tcl85(n), pkg_mkIndex(n): Build an index for automatic loading of packages
pkg_printf(3), pkg_fprintf(3), pkg_dprintf(3), pkg_snprintf(3), pkg_asprintf(3), pkg_vprintf(3), pkg_vfprintf(3), pkg_vdprintf(3), pkg_vsnprintf(3), pkg_vasprintf(3): formatted output of package data
pkg_rmleaves(1): deinstall 'leaf' packages
pkg_search(1): print information about a package
pkg_sort(1): sort lines of package names in dependency order
pkg_tree(7): Generate a graphical tree of packages and their dependencies
pkg_trim(8): select and remove unwanted leaf packages
pkg_update(1): Easy handling of jailed packages builds
pkg_validate(1): list mismatched and missing files of installed packages
pkgdata(1): package data for use by ICU
pkgdb(1), pkg_which(1): tools to manage and search the package database
pkgdelta(8): package delta generation utility
pkgdu(1): a tool to display packages disk usage size
pkgs_which(1): Quickly find packages where trees of files got installed
pktogf(1): convert packed font files to generic font files
pktopbm(1): convert packed (PK) format font into PBM lbAC
pktstat(1): display packet activity on a crt
pktype(1): verify and translate a packed font bitmap file to plain text
plasmapkg2(1): Install, list, remove Plasma packages
portsclean(1): a tool to clean ports/packages garbage
portsreinstall-chroot(8): Support utility for portsreinstall(8) to build packages in a virtual environment
portsreinstall-upgrade(8): Support utility for portsreinstall(8) to update a target environment using packages built in a builder environment
portupgrade(1), portinstall(1): tools to upgrade installed packages or install new ones via ports or packages
portversion(1): a tool to compare the versions of installed packages with the ones in the ports tree
poudriere(8): bulk package builder and port tester
poudriere-bulk(8), poudriere bulk(8): build a ready-to-export package tree
poudriere-pkgclean(8), poudriere pkgclean(8): cleanup old or unwanted packages
pskc_add_keypackage(3): API function
pskc_get_keypackage(3): API function
ptunnel(8): tunnel TCP connections over ICMP echo request/reply packets
purge-old-kernels(1): remove old kernel and header packages from the system
pvm_pack(3): Pack the active message buffer with arrays of prescribed data type
pvm_pkmesg(3), pvm_pkmesgbody(3), pvm_upkmesg(3): Pack messages into other messages
pvm_psend(3): Pack and send data in one call
pvm_unpack(3): Unpack the active message buffer into arrays of prescribed data type
pwol(1): Send Wake-On-LAN (WoL) packets to wake-up hosts over the network
r2pm(1), R2PM(1): radare2 package manager
r3d_objects(l), Object(l): types used by the Raster3D package These are the object descriptor types, and the required parameters, recognized by the render program and other components of the Raster3D package
radclient(1): send packets to a RADIUS server, show reply
raddump(1): decipher captured RADIUS packets
radeapclient(1): send EAP packets to a RADIUS server, calculate responses
radping(8): send ICMP ECHO_REQUEST packets to a dial-up host
radtest(1): send packets to a RADIUS server, show reply
raster3d(l), Raster3D(l): molecular graphics package
rcvpack(1): append an email from standard input to a file
reggae(1): REGister Globaly Access Everywhere is a package which helps in common DevOps tasks
render(l): Raster3D molecular graphics package rendering program
repo-add(8): package database maintenance utility
ribbon(l): Raster3D molecular graphics package ribbon-drawer
router(8): XML packet distributor
rpm(8): RPM Package Manager
rpm2archive(8): Create tar archive from RPM Package Manager (RPM) package
rpm2cpio(8): Extract cpio archive from RPM Package Manager (RPM) package
rpmbuild(8): Build RPM Package(s)
rpmdeps(8): Generate RPM Package Dependencies
rpmgraph(8): Display RPM Package Dependency Graph
rpmsign(8): RPM Package Signing
rpp(3), rpp_open(3), rpp_bind(3), rpp_poll(3), rpp_io(3), rpp_read(3), rpp_write(3), rpp_close(3), rpp_getaddr(3), rpp_flush(3), rpp_terminate(3), rpp_shutdown(3), rpp_rcommit(3), rpp_wcommit(3), rpp_eom(3), rpp_getc(3), rpp_putc(3): reliable packet protocol
rtpdump(1): parse and print RTP packets
rtpsend(1): generate RTP packets from textual description
rwflowpack(8): Collect flow data and store it in binary SiLK Flow files
rwpackchecker(8): Find unusual patterns that may indicate a corrupt file
rwpdedupe(1): Eliminate duplicate packets collected by several sensors
rwptoflow(1): Generate SiLK Flow records from packet data
sane-hp3500(5): SANE backend for Hewlett-Packard ScanJet 3500 series scanners
sane-hp4200(5): SANE backend for Hewlett-Packard 4200 scanners
sane-hp5400(5): SANE backend for Hewlett-Packard 54XX scanners
sane-hp5590(5): SANE backend for Hewlett-Packard 4500C/4570C/5500C/5550C/5590/7650 Workgroup/Document scanners
sane-hpljm1005(5): SANE backend for Hewlett-Packard LaserJet M1005 MFP Scanner
save_bmp_pf(3): Packfile version of save_bmp. Allegro game programming library
save_pcx_pf(3): Packfile version of save_pcx. Allegro game programming library
save_tga_pf(3): Packfile version of save_tga. Allegro game programming library
sc_tbitpmtud(1): scamper driver to test systems for responsiveness to ICMP packet too big messages
sc_warts2pcap(1): write packets included in warts object to a pcap file
scapy(1): Interactive packet manipulation tool
sendip(1): Send arbitrary IP packets
sensor.conf(5): Sensor Configuration file for rwflowpack and flowcap
setup(1): graphical setup program for the esp package manager
sg3_utils(8): a package of utilities for sending SCSI commands
sharpconstruct(1): Interactive 3D modeling package
site-lib(5), R site-lib(5): [Location of package directories]c
smi_util(3), smiGetMinSize(3), smiGetMaxSize(3), smiPack(3), smiUnpack(3): SMI type utility functions
snmpd(8): daemon to respond to SNMP request packets
snort2pfcd(8): provides real-time blocking of ip addresses from snort alerts via packet filter firewall tables
sqpack(1): purges squish or jam msgbases taken from fidoconfig
srec_fpc(5): four packed code file format require_index { }
synth(1): custom package repository builder for FreeBSD and DragonFly
tai_pack(3): convert TAI64 labels to external format
tai_pack(3): convert to external TAI64 format
taia_pack(3): convert TAI64NA labels to external format
taia_pack(3): convert to external TAI64NA format
tcprewrite(1), *[B-Font]tcprewrite(1): Rewrite the packets in a pcap file
tcptraceroute(1): A traceroute implementation using TCP packets
testing(3): LAPACK Testing
texdoctk(1): GUI for easier access of TeX package and program documentations
textpack(1): Pack and unpack Flex files containing text
tkgeomap(n): a package for displaying geographic lines and points in canvas widgets
tracepktdump(1): output packets in human readable format
udp_recv(3): receives an UDP packet
udp_recvl(3): receives an UDP packet
udp_send(3): sends an UDP packet
udp_sendl(3): sends an UDP packet
unstow(1): unstow packages much faster than stow -D
upackddir(1): extract PackdDir files
update-pkg(8): Easy update for packages with pkg
upt(1): Universal Packaging Tool
uschedule_intro(7): an introduction to the uschedule package
vala-gen-introspect(1): generate a GI file for GObject and glib based packages
viewglob(1): convenience wrapper script for the Viewglob package
vmailmgr(7): a package to manage virtual mailboxes and aliases
volpack-BruteForce(3), vpBruteForceRender(3): render using a simple brute-force method
volpack-Callback(3), vpSetCallback(3): define a callback function
volpack-ClientData(3), vpSetClientData(3): define a client data pointer
volpack-ClsfyScalar(3), vpClassifyScalars(3): create a preclassified volume from scalar data
volpack-ClsfyScan(3), vpClassifyScanline(3): incrementally create a preclassified volume from scanlines of scalar data
volpack-ClsfyTable(3), vpSetClassifierTable(3): specify an opacity transfer function
volpack-ClsfyVolume(3), vpClassifyVolume(3), vpDestroyClassifiedVolume(3): create/destroy a preclassified volume for fast rendering
volpack-Context(3), vpCreateContext(3), vpDestroyContext(3): create/destroy a rendering context
volpack-CurrentMatrix(3), vpCurrentMatrix(3): choose the current transformation matrix
volpack-Debug(3), vpSetDebug(3): enable/disable debugging options
volpack-DepthCueing(3), vpSetDepthCueing(3): set depth cueing parameters
volpack-Enable(3), vpEnable(3): enable or disable options
volpack-Error(3), vpGetError(3), vpGetErrorString(3): retrieve error codes
volpack-Extract(3), vpExtract(3): extract one field from a rectangular region of a volume
volpack-Filter(3), vpSetFilter(3): define a resampling filter
volpack-FilterTab(3), vpBoxFilter(3), vpLinearFilter(3), vpBicubicFilter(3), vpGaussianFilter(3): initialize a filter weight table
volpack-Get(3), vpGeti(3), vpGetd(3), vpGetp(3): get the value of an option
volpack-GetImage(3), vpGetImage(3): get a field of the intermediate image
volpack-GetLight(3), vpGetLight(3): get lighting properties
volpack-GetMaterial(3), vpGetMaterial(3): get material properties
volpack-GetMatrix(3), vpGetMatrix(3): retrieve the contents of a transformation matrix
volpack-Identity(3), vpIdentityMatrix(3): load the identity matrix into the current transformation matrix
volpack-Image(3), vpSetImage(3): specify an image array
volpack-Light(3), vpSetLight(3): set lighting properties
volpack-LinAlgebra(3), vpIdentity3(3), vpIdentity4(3), vpNormalize3(3), vpMatrixVectorMult4(3), vpMatrixMult4(3), vpCrossProduct(3), vpSolveSystem4(3), vpSetVector3(3), vpSetVector4(3): linear algebra routines
volpack-Load(3), vpLoadRawVolume(3), vpLoadMinMaxOctree(3), vpLoadClassifiedVolume(3), vpLoadContext(3): load volume data structures from a file
volpack-LookupShader(3), vpSetLookupShader(3): specify shading lookup tables
volpack-Material(3), vpSetMaterial(3): set material properties
volpack-MinMaxOctree(3), vpCreateMinMaxOctree(3), vpMinMaxOctreeThreshold(3), vpDestroyMinMaxOctree(3): create/destroy a min-max octree for optimized rendering
volpack-MultMatrix(3), vpMultMatrix(3): multiply the current transformation matrix by another matrix
volpack-NormalIndex(3), vpNormalIndex(3), vpNormal(3): encode/decode a surface normal vector
volpack-OctreeMask(3), vpOctreeMask(3): compute a mask representing one level of a min-max octree
volpack-Ramp(3), vpRamp(3): initialize an array with a piecewise-linear ramp
volpack-RawVoxels(3), vpSetRawVoxels(3): specify an array of volume data
volpack-Render(3), vpRenderRawVolume(3), vpRenderClassifiedVolume(3): render a volume
volpack-Resample(3), vpResample(3), vpResample2D(3), vpResample3D(3): resample an array
volpack-Rotate(3), vpRotate(3): multiply the current transformation matrix by a rotation matrix
volpack-Scale(3), vpScale(3): multiply the current transformation matrix by a scaling matrix
volpack-ScanNormals(3), vpScanlineNormals(3): compute surface normal vectors and gradient magnitudes for a scanline
volpack-Set(3), vpSeti(3), vpSetd(3): set the value of an option
volpack-SetMatrix(3), vpSetMatrix(3): load a matrix into the current transformation matrix
volpack-ShadeTable(3), vpShadeTable(3): compute the contents of the shading lookup table
volpack-Shadow(3), vpSetShadowLookupShader(3): specify shading lookup tables for rendering shadows
volpack-Store(3), vpStoreRawVolume(3), vpStoreMinMaxOctree(3), vpStoreClassifiedVolume(3), vpStoreContext(3): store volume data structures to a file
volpack-Timer(3), vpGetTimer(3), vpClearTimer(3): interval timer facility
volpack-TracePixel(3), vpTracePixel(3): print a trace of the voxels composited into a pixel
volpack-Translate(3), vpTranslate(3): multiply the current transformation matrix by a translation matrix
volpack-Transpose(3), vpTranspose(3): transpose a volume
volpack-VolPack(3), VolPack(3): introduction to VolPack, a library for volume rendering
volpack-VolumeNormals(3), vpVolumeNormals(3): compute surface normal vectors and gradient magnitudes for a volume
volpack-VolumeSize(3), vpSetVolumeSize(3): define the dimensions of a volume
volpack-VoxelField(3), vpSetVoxelField(3), vpFieldOffset(3): define the size and location of a voxel field
volpack-VoxelSize(3), vpSetVoxelSize(3): define the size of a voxel
volpack-Window(3), vpWindow(3): multiply the projection matrix by a perspective or orthographic matrix
volpack-WindowPHIGS(3), vpWindowPHIGS(3): multiply the projection matrix by a PHIGS viewing matrix
wad(1): The QuakeForge Packfile Tool
wirefilter(1): Wire packet filter for Virtual Distributed Ethernet
wnpkgs(7): description of various WordNet system packages
xfp(1): A simple package manager for X Window
yaf(1): deep packet inspection
zip(1): package and compress (archive) files
Algorithm::BinPack(3): efficiently pack items into bins
Alien::Build::Plugin::PkgConfig::Negotiate(3): Package configuration negotiation plugin
AnyEvent::MPRPC::Client(3): Simple TCP-based MessagePack RPC client
AnyEvent::MPRPC::Server(3): Simple TCP-based MessagePack RPC server
AnyEvent::MessagePack(3): MessagePack stream serializer/deserializer for AnyEvent
Apache::Session::Serialize::Sybase(3): Use Storable to zip up persistent data and unpack/pack to put into Sybase-compatible image field
Apache::Session::Serialize::UUEncode(3): Use Storable and "pack()" to zip up persistent data
App::FatPacker(3): pack your dependencies onto your script file
App::FatPacker::Trace(3): Tracing module usage using compilation checking
App::Info(3): Information about software packages on a system
App::Packer::PAR(3): Pack applications in a single executable file
App::cpanminus(3): get, unpack, build and install modules from CPAN
App::cpanminus::fatscript(3), cpanm(3): get, unpack build and install modules from CPAN
Archive::Any::Lite(3): simple CPAN package extractor
Asterisk(3), asterisk::perl(3): This module exists solely to satisfy packaging requirements
Audio::Musepack(3): An object-oriented interface to Musepack file information and APE tag fields
AutoSplit(3): split a package for autoloading
Badger::Class::Vars(3): class module for defining package variables
Bigtop::Backend::Model::GantryCDBI(3), [% package_name %](3): model for [% table_name %] table (stub part)
Bio::Graphics::Glyph::three_letters(3): DAS-compatible package to use for drawing a line of groups of three letters
Bio::Phylo::NeXML::DOM::Document::Libxml(3): XML DOM document mappings to the "XML::LibXML" package
Bio::Phylo::NeXML::DOM::Document::Twig(3): XML DOM document mappings to the "XML::Twig" package
Bio::Phylo::NeXML::DOM::Element::Libxml(3): XML DOM element mappings to the "XML::LibXML" package
Bio::Phylo::NeXML::DOM::Element::Twig(3): XML DOM mappings to the XML::Twig package
Bio::Seq::SequenceTrace(3): Bioperl object packaging a sequence with its trace
BorderStyleRole::Source::Hash(3): Get border characters from %CHARS (or @MULTI_CHARS) package variable
Business::ISBN::Data(3): data pack for Business::ISBN
Business::ISMN::Data(3): data pack for Business::ISMN
CGI::Compress::Gzip::FileHandle(3): CGI::Compress::Gzip helper package
CGI::Minimal(3): A lightweight CGI form processing package
CLASS(3): Alias for _|_PACKAGE_|_
CPANPLUS::Dist::Build(3): CPANPLUS plugin to install packages that use Build.PL
CSS::Packer(3): Another CSS minifier
Carton::Doc::Fatpack(3): Fatpack carton executable into vendor/bin
Cisco::IPPhone(3): Package for creating Cisco IPPhone XML objects
Class::MOP::Package(3): Package Meta Object
Class::MakeMethods::Template::Class(3): Associate information with a package
Class::MakeMethods::Template::PackageVar(3): Static methods with global variables
Commandable::Finder::Packages(3), "Commandable::Finder::Packages"(3): find commands stored per package
Config::MVP(3): multivalue-property package-oriented configuration
Crypt::OpenPGP::Ciphertext(3): Encrypted data packet
Crypt::OpenPGP::Compressed(3): Compressed data packets
Crypt::OpenPGP::MDC(3): MDC (modification detection code) packet
Crypt::OpenPGP::Marker(3): PGP Marker packet
Crypt::OpenPGP::Message(3): Sequence of PGP packets
Crypt::OpenPGP::OnePassSig(3): One-Pass Signature packet
Crypt::OpenPGP::PacketFactory(3): Parse and save PGP packet streams
Crypt::OpenPGP::Plaintext(3): A plaintext, literal-data packet
Crypt::OpenPGP::Signature(3): Signature packet
Crypt::OpenPGP::Trust(3): PGP Trust packet
Crypt::OpenPGP::UserID(3): PGP User ID packet
DBI::Format(3): A package for displaying result tables
DBI::Format::CSV(3): A package for displaying result tables
DBI::Format::SQLMinus(3): A package for displaying result tables
DBIx::HA(3): High Availability package for DBI
DNS::LDNS::Packet(3): DNS packet
DR::Tarantool::MsgPack(3): msgpack encoder/decoder
DR::Tarantool::MsgPack::AsyncClient(3): async client for tarantool
DR::Tarantool::Tuple::MsgPack(3): a tuple container for DR::Tarantool (v >= 1.6)
Dancer2::Core::App(3): encapsulation of Dancer2 packages
Dancer2::Plugin::Passphrase::Core(3): Core package for Dancer2::Plugin::Passphrase
Dancer2::Plugin::Passphrase::Hashed(3): Helper package for Dancer2::Plugin::Passphrase
Data::AMF::Packet(3): serialize / deserialize AMF message packet
Data::IEEE754(3): Pack and unpack big-endian IEEE754 floats and doubles
Data::MessagePack(3): MessagePack serializing/deserializing
Data::MessagePack::PP(3): Pure Perl implementation of Data::MessagePack
Data::MessagePack::Stream(3): yet another messagepack streaming deserializer
Data::MessagePack::Unpacker(3): (DEPRECATED)messagepack streaming deserializer
Devel::InnerPackage(3): find all the inner packages of a package
Devel::PackagePath(3): Inspect and Manipulate a Path based on a Package Name
Devel::REPL::Plugin::CompletionDriver::Globals(3): Complete global variables, packages, namespaced functions
Devel::REPL::Plugin::Packages(3): Keep track of which package the user is in
Digest::ManberHash(3): a Perl package to calculate Manber Hashes
Dist::Zilla::Plugin::PkgDist(3): add a $DIST to your packages
Dist::Zilla::Plugin::PkgVersion(3): add a $VERSION to your packages
Excel::Writer::XLSX::Package::App(3), App(3): A class for writing the Excel XLSX app.xml file
Excel::Writer::XLSX::Package::Comments(3), Comments(3): A class for writing the Excel XLSX Comments files
Excel::Writer::XLSX::Package::ContentTypes(3): A class for writing the Excel XLSX [Content_Types] file
Excel::Writer::XLSX::Package::Core(3), Core(3): A class for writing the Excel XLSX core.xml file
Excel::Writer::XLSX::Package::Custom(3), Custom(3): A class for writing the Excel XLSX custom.xml file
Excel::Writer::XLSX::Package::Metadata(3), Metadata(3): A class for writing the Excel XLSX metadata.xml file
Excel::Writer::XLSX::Package::Packager(3), Packager(3): A class for creating the Excel XLSX package
Excel::Writer::XLSX::Package::Relationships(3), Relationships(3): A class for writing the Excel XLSX Rels file
Excel::Writer::XLSX::Package::SharedStrings(3), SharedStrings(3): A class for writing the Excel XLSX sharedStrings.xml file
Excel::Writer::XLSX::Package::Styles(3), Styles(3): A class for writing the Excel XLSX styles file
Excel::Writer::XLSX::Package::Table(3), Table(3): A class for writing the Excel XLSX Table file
Excel::Writer::XLSX::Package::Theme(3), Theme(3): A class for writing the Excel XLSX Theme file
Excel::Writer::XLSX::Package::VML(3), VML(3): A class for writing the Excel XLSX VML files
Excel::Writer::XLSX::Package::XMLwriter(3), XMLwriter(3): A base class for the Excel::Writer::XLSX writer classes
ExtUtils::Packlist(3): manage .packlist files
ExtUtils::ParseXS::Eval(3): Clean package to evaluate code in
ExtUtils::XSpp::Node::Class(3): A class (inherits from Package)
ExtUtils::XSpp::Node::Package(3): Node representing a Perl package
File::FcntlLock(3): File locking with fcntl(2) This text also documents the following sub-packages: "File::FcntlLock::XS" 2 Item "File::FcntlLock::XS" "File::FcntlLock::Pure" 2 Item "File::FcntlLock::Pure" "File::FcntlLock::Inline" 2 Item "File::FcntlLock::Inline"
Font::TTF::AATutils(3): Utility functions for AAT tables n .SS "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" .SS "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" Subsection "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" n .SS "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" .SS "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" Subsection "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" $packEntry is a subroutine for packing an entry into binary form, called as $dat = $packEntry($entry, $entryTable, $numEntries) where the entry is a comma-separated list of nextStateOffset, flags, actions n .SS "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" .SS "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" Subsection "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" n .SS "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" .SS "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" Subsection "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" n .SS "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)" .SS "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)" Subsection "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)"
GPS::OID(3): Package for GPS PRN - Object ID conversions
Goo::Thing::pm::PackageProfileOption(3): Store individual options in the profile
HTML::Display::Common(3): routines common to all HTML::Display subclasses n .SS "_|_PACKAGE_|_->new %ARGS" .SS "_|_PACKAGE_|_->new %ARGS" Subsection "__PACKAGE__->new %ARGS" Creates a new object as a blessed hash. The passed arguments are stored within the hash. If you need to do other things in your constructor, remember to call this constructor as well : package HTML::Display::WhizBang; use parent HTML::Display::Common; sub new { my ($class) = shift; my %args = @_; my $self = $class->SUPER::new(%args); # do stuff $self; }; n .SS "$display->display %ARGS" .SS "$display->display %ARGS" Subsection "$display->display %ARGS" This is the routine used to display the HTML to the user. It takes the following parameters : html => SCALAR containing the HTML file => SCALAR containing the filename of the file to be displayed base => optional base url for the HTML, so that relative links still work location (synonymous to base) Basic usage : Subsection "Basic usage :" my $html = "<html><body><h1>Hello world!</h1></body></html>"; my $browser = HTML::Display->new(); $browser->display( html => $html ); Location parameter : Subsection "Location parameter :" If you fetch a page from a remote site but still want to display it to the user, the location parameter comes in very handy : my $html = <html><body><img src="/images/hp0.gif"></body></html>; my $browser = HTML::Display->new(); # This will display part of the Google logo $browser->display( html => $html, base => http://www.google.com );
HTML::Packer(3): Another HTML code cleaner
HTML::Prototype::Helper(3): Imports helper packages for HTML::Prototype
HTML::QuickCheck(3), HTMLQuickCheck.pm(3): -- a simple and fast HTML syntax checking package for perl 4 and perl 5
HTML::Template::Associate(3), HTML::Template::Associate(3): Associate relevant packages with HTML::Template
HTTP::Headers::ActionPack(3): HTTP Action, Adventure and Excitement
HTTP::Headers::ActionPack::AcceptCharset(3): A Priority List customized for Media Types
HTTP::Headers::ActionPack::AcceptLanguage(3): A Priority List customized for Media Types
HTTP::Headers::ActionPack::AuthenticationInfo(3): The Authentication-Info Header
HTTP::Headers::ActionPack::Authorization(3): The Authorization Header factory
HTTP::Headers::ActionPack::Authorization::Basic(3): The Basic Authorization Header
HTTP::Headers::ActionPack::Authorization::Digest(3): The Digest Authorization Header
HTTP::Headers::ActionPack::ContentNegotiation(3): A class to handle content negotiation
HTTP::Headers::ActionPack::Core::Base(3): A Base class
HTTP::Headers::ActionPack::Core::BaseAuthHeader(3): The base Auth Header
HTTP::Headers::ActionPack::Core::BaseHeaderList(3): A Base Header List
HTTP::Headers::ActionPack::Core::BaseHeaderType(3): A Base header type
HTTP::Headers::ActionPack::Core::BaseHeaderWithParams(3): A Base header type with parameters
HTTP::Headers::ActionPack::DateHeader(3): A Date Header
HTTP::Headers::ActionPack::LinkHeader(3): A Link
HTTP::Headers::ActionPack::LinkList(3): A List of Link objects
HTTP::Headers::ActionPack::MediaType(3): A Media Type
HTTP::Headers::ActionPack::MediaTypeList(3): A Priority List customized for Media Types
HTTP::Headers::ActionPack::PriorityList(3): A Priority List
HTTP::Headers::ActionPack::Util(3): General Utility module
HTTP::Headers::ActionPack::WWWAuthenticate(3): The WWW-Authenticate Header
HTTP::Throwable::Variant(3): a package that constructs Moo-based HTTP::Throwables for you
HTTP::WebTest::SelfTest(3): Helper package for HTTP::WebTest test suite
IO::Socket::Socks::Wrapper(3): Add SOCKS support for any perl object / package / program
IPC::PerlSSH::Library(3), "IPC::PerlSSH::Library"(3): support package for declaring libraries of remote functions
Image::ExifTool::HP(3): Hewlett-Packard maker notes tags
Image::ExifTool::MPC(3): Read Musepack audio meta information
Import::Into(3): Import packages into other packages
JMX::Jmx4Perl::Nagios::SingleCheck(3): A single nagios check This is an package used internally by JMX::Jmx4Perl::Nagios::CheckJmx4Perl. It encapsulates the configuration for single checks, which can be combined to a bulk JMX-Request so only a single server turnaround is used to obtain multiple checks results at once
JMX::Jmx4Perl::Product::BaseHandler(3): Base package for product specific handler
JavaScript::Packer(3): Perl version of Dean Edwards' Packer.js
LaTeX::Table::Types::Ctable(3): Create LaTeX tables with the ctable package
LaTeX::Table::Types::Longtable(3): Create multi-page LaTeX tables with the longtable package
LaTeX::Table::Types::Xtab(3): Create multi-page LaTeX tables with the xtabular package
LaTeXML::Global(3), "LaTeXML::Global"(3): global exports used within LaTeXML, and in Packages
LaTeXML::Package(3), "LaTeXML::Package"(3): Support for package implementations and document customization
LaTeXML::Util::Pack(3), "LaTeXML::Util::Pack"(3): smart packing and unpacking of TeX archives
Lexical::Import(3): clean imports from package-exporting modules
List::AllUtils(3): Combines List::Util, List::SomeUtils and List::UtilsBy in one bite-sized package
Log::Contextual::Easy::Package(3): Import all logging methods with WarnLogger as default package logger
Log::Dispatch::Vars(3): Variables used internally by multiple packages
MCE::Shared::Base(3): Base package for helper classes
MCE::Shared::Server(3): Server/Object packages for MCE::Shared
MPI_Pack(3): Packs data of a given datatype into contiguous memory
MPI_Pack_external(3): Writes data to a portable format
MPI_Pack_external_size(3): Calculates upper bound on space needed to write to a portable format
MPI_Pack_size(3): Returns the upper bound on the amount of space needed to pack a message
MPI_Unpack(3): Unpacks a datatype into contiguous memory
MPI_Unpack_external(3): Reads data from a portable format
Mac::PropertyList::WriteBinary(3): pack data into a Mac "binary property list"
Mail::OpenDKIM::PrivateKey(3): Load in a private key for use with the Mail::OpenDKIM package
Mail::SpamAssassin::GeoDB(3): unified interface for geoip modules Plugins need to signal SA main package the modules they want loaded package Mail::SpamAssassin::Plugin::MyPlugin; sub new { ... $self->{main}->{geodb_wanted}->{country} = 1; $self->{main}->{geodb_wanted}->{isp} = 1; ) (internal stuff still subject to change)
Math::BigFloat(3): arbitrary size floating point math package
Math::BigInt(3): arbitrary size integer math package
Math::BigRat(3): arbitrary size rational number math package
MetaCPAN::Client::Package(3): A package data object (02packages.details entry)
Mock::Sub(3): Mock package, object and standard subroutines, with unit testing in mind
Module::Build::Kwalitee(3): Module::Build subclass with prepackaged tests
Module::Build::PPMMaker(3): Perl Package Manager file creation
Module::CPANTS::Kwalitee::Repackageable(3): Checks for various signs that make a module packageable
Module::Collect::Package(3): package abstract class for Module::Collect
Module::Functions(3): Get function list from package
Module::Install::PAR(3): Module::Install Support for PAR::Dist packages
Module::Metadata(3): Gather package and POD information from perl module files
Net::ARP(3), ARP(3): Perl extension for creating ARP packets
Net::Analysis::EventLoop(3): generate a stream of packets
Net::Analysis::Listener::TCP(3): listens to packets, emits streams
Net::Analysis::Packet(3): wrapper for our own view of a packet
Net::BitTorrent::PeerPacket(3), Net::BitTorrent::PeerPacket(3): Parse/Build Peer Packets from BitTorrent
Net::BitTorrent::Protocol(3): Packet utilities for the BitTorrent protocol
Net::DHCP(3): Object methods to create a DHCP packet
Net::DHCP::Packet(3): Object methods to create a DHCP packet
Net::DHCP::Packet::Attributes(3): Attribute methods for Net::DHCP::Packet
Net::DHCP::Packet::IPv4Utils(3): Object methods for IPv4 in Net::DHCP
Net::DHCP::Packet::OrderOptions(3): Option ordering logic for Net::DHCP
Net::DNS::Header(3): DNS packet header
Net::DNS::Packet(3): DNS protocol packet
Net::DNS::ToolKit(3): tools for working with DNS packets
Net::DNS::Update(3): DNS dynamic update packet
Net::NSCA::Client::DataPacket(3): Implements data packet for the NSCA protocol
Net::NSCA::Client::InitialPacket(3): Implements initial packet for the NSCA protocol
Net::OAI::Harvester(3): A package for harvesting metadata using OAI-PMH
Net::OpenSSH(3): Perl SSH client package implemented on top of OpenSSH
Net::OpenSSH::SSH(3): Perl SSH client package implemented on top of OpenSSH
Net::Packet(3): a framework to easily send and receive frames from layer 2 to layer 7
Net::Packet::ARP(3): Address Resolution Protocol layer 3 object
Net::Packet::CDP(3): Cisco Discovery Protocol layer 4 object
Net::Packet::CDP::Address(3): Cisco Discovery Protocol Address format
Net::Packet::CDP::Type(3): base class for Cisco Discovery Protocol extension headers
Net::Packet::CDP::TypeAddresses(3): Cisco Discovery Protocol Addresses extension header
Net::Packet::CDP::TypeCapabilities(3): Cisco Discovery Protocol Capabilities extension header
Net::Packet::CDP::TypeDeviceId(3): Cisco Discovery Protocol Device ID extension header
Net::Packet::CDP::TypePortId(3): Cisco Discovery Protocol Port ID extension header
Net::Packet::CDP::TypeSoftwareVersion(3): Cisco Discovery Protocol Software Version extension header
Net::Packet::Consts(3): all constants used in Net::Packet framework
Net::Packet::Desc(3): base class for all desc modules
Net::Packet::DescL2(3): object for a link layer (layer 2) descriptor
Net::Packet::DescL3(3): object for a network layer (layer 3) descriptor
Net::Packet::DescL4(3): object for a transport layer (layer 4) descriptor
Net::Packet::Dump(3): a tcpdump-like object providing frame capturing and more
Net::Packet::ETH(3): Ethernet/802.3 layer 2 object
Net::Packet::Env(3): environment object used for frame capture/injection
Net::Packet::Frame(3): object encapsulator for Net::Packet layers
Net::Packet::ICMPv4(3): Internet Control Message Protocol v4 layer 4 object
Net::Packet::IGMPv4(3): Internet Group Management Protocol v4 layer 4 object
Net::Packet::IPv4(3): Internet Protocol v4 layer 3 object
Net::Packet::IPv6(3): Internet Protocol v6 layer 3 object
Net::Packet::LLC(3): Logical-Link Control layer 3 object
Net::Packet::Layer(3): base class for all layer modules
Net::Packet::Layer2(3): base class for all layer 2 modules
Net::Packet::Layer3(3): base class for all layer 3 modules
Net::Packet::Layer4(3): base class for all layer 4 modules
Net::Packet::Layer7(3): application layer object
Net::Packet::NULL(3): BSD loopback layer 2 object
Net::Packet::OSPF(3): Open Shortest Path First layer 4 object
Net::Packet::PPP(3): Point-to-Point Protocol layer 2 object
Net::Packet::PPPLCP(3): PPP Link Control Protocol layer 3 object
Net::Packet::PPPoE(3): PPP-over-Ethernet layer 3 object
Net::Packet::RAW(3): empty layer 2 object
Net::Packet::SLL(3): Linux cooked capture layer 2 object
Net::Packet::STP(3): Spanning Tree Protocol layer 4 object
Net::Packet::TCP(3): Transmission Control Protocol layer 4 object
Net::Packet::Target(3): an object for all network related stuff
Net::Packet::UDP(3): User Datagram Protocol layer 4 object
Net::Packet::Utils(3): useful subroutines used in Net::Packet
Net::Packet::VLAN(3): 802.1Q layer 3 object
Net::Pcap(3): Interface to the pcap(3) LBL packet capture library
Net::RNDC::Packet(3): RNDC Protocol V1 Packet Parsing and Generation
Net::RNDC::Session(3): Helper package to manage the RNDC 4-packet session
Net::RTP(3): Send and receive RTP packets (RFC3550)
Net::RTP::Packet(3): RTP Packet object (RFC3550)
Net::Radius::Packet(3): Object-oriented Perl interface to RADIUS packets
Net::Radius::Server::DBStore(3): Store Radius packets into a Tied Hash
Net::Radius::Server::Dump(3): Produce a dump of the RADIUS packets
Net::RawIP(3): Perl extension to manipulate raw IP packets with interface to libpcap This is the documentation of "Net::RawIP" version 0.25
Net::SAP::Packet(3): A SAP Packet
Net::SIP::Authorize(3): enforce authorization of packets
Net::SIP::DTMF(3): DTMF RTP packet generating and extracting
Net::SIP::Dispatcher(3): dispatch SIP packets between legs and endpoint
Net::SIP::Endpoint(3): Endpoint for SIP packets (UAC,UAS)
Net::SIP::Leg(3): Wrapper around Socket for sending and receiving SIP packets
Net::SIP::Packet(3): handling of SIP packets
Net::SIP::ReceiveChain(3): handle incoming packet by multiple receivers
Net::SIP::Request(3): handling of SIP request packets
Net::SIP::Response(3): handling of SIP response packets
Net::SSH::Perl::Packet(3): Packet layer of SSH protocol
Net::TacacsPlus::Constants(3): Tacacs+ packet constants
Net::TacacsPlus::Packet(3): Tacacs+ packet object
Net::TacacsPlus::Packet::AccountReplyBody(3): Tacacs+ accounting reply body
Net::TacacsPlus::Packet::AccountRequestBody(3): Tacacs+ accounting request body
Net::TacacsPlus::Packet::AuthenContinueBody(3): Tacacs+ authentication continue body
Net::TacacsPlus::Packet::AuthenReplyBody(3): Tacacs+ authentication replay body
Net::TacacsPlus::Packet::AuthenStartBody(3): Tacacs+ authentication packet body
Net::TacacsPlus::Packet::AuthorRequestBody(3): Tacacs+ authorization request body
Net::TacacsPlus::Packet::AuthorResponseBody(3): Tacacs+ authorization response body
Net::TacacsPlus::Packet::Header(3): Tacacs+ packet header
Net::TcpDumpLog(3): Read tcpdump/libpcap network packet logs. Perl implementation (not an interface)
Net::UPS::Package(3): Class representing a UPS Package
Net::Wake(3): A package to send packets to power on computers
Net::Z3950::GRS1(3), Net::Z3950::Record::GRS1(3): Perl package used to encode GRS-1 records
NetPacket(3): assemble/disassemble network packets at the protocol level
NetPacket::ARP(3): Assemble and disassemble ARP (Address Resolution Protocol) packets
NetPacket::Ethernet(3): Assemble and disassemble ethernet packets
NetPacket::ICMP(3): Assemble and disassemble ICMP (Internet Control Message Protocol) packets
NetPacket::IGMP(3): Assemble and disassemble IGMP (Internet Group Mangement Protocol) packets
NetPacket::IP(3): Assemble and disassemble IP (Internet Protocol) packets
NetPacket::IPX(3): Assemble and disassemble IPX packets
NetPacket::TCP(3): Assemble and disassemble TCP (Transmission Control Protocol) packets
NetPacket::UDP(3): Assemble and disassemble UDP (User Datagram Protocol) packets
NetPacket::USBMon(3): Assemble and disassemble USB packets captured via Linux USBMon interface
ODF::lpOD::Document(3): General ODF package handling and metadata
Object::Import(3): import methods of an object as functions to a package
OpenXPKI::Server::API2::Plugin::Api::Util::ModuleFinder(3): Find modules by package name
PAR::Packer(3): PAR Packager
PAR::StrippedPARL::Base(3): Base class for the PARL data packages
PAR::Tutorial(3): Cross-Platform Packaging and Deployment with PAR
PDF::API3::Compat::API2::Util(3): utility package for often use methods across the package
PDF::Builder::Util(3): utility package for often-used methods across the package
PDL::State(3), State(3): A package to keep track of plotting commands
POE::Component::LaDBI::Commands(3): Package that contains some constants other LaDBI packages might use
PPI::Statement::Package(3): A package statement
PPI::Token::Number::Version(3): Token class for a byte-packed number
PPIx::EditorTools::RenamePackage(3): Change the package name
PPIx::EditorTools::RenamePackageFromPath(3): Change the package name based on the files path
PPIx::Regexp::Token::Interpolation(3): Represent an interpolation in the PPIx::Regexp package
Package::Constants(3): List all constants declared in a package
Package::DeprecationManager(3): Manage deprecation warnings for your distribution
Package::Generator(3): generate new packages quickly and easily
Package::MoreUtil(3): Package-related utilities
Package::Reaper(3): pseudo-garbage-collection for packages
Package::Stash(3): Routines for manipulating stashes
Package::Stash::PP(3): Pure perl implementation of the Package::Stash API
Package::Stash::XS(3): Faster and more correct implementation of the Package::Stash API
Package::Util::Lite(3): Package-related utilities
Package::Variant(3): Parameterizable packages
Parse::CPAN::Packages(3): Parse 02packages.details.txt.gz
Parse::CPAN::Packages::Fast(3): parse CPAN's package index
Paws::CodeArtifact::CopyPackageVersions(3): Arguments for method CopyPackageVersions on Paws::CodeArtifact
Paws::CodeArtifact::DeletePackageVersions(3): Arguments for method DeletePackageVersions on Paws::CodeArtifact
Paws::CodeArtifact::DescribePackageVersion(3): Arguments for method DescribePackageVersion on Paws::CodeArtifact
Paws::CodeArtifact::DisposePackageVersions(3): Arguments for method DisposePackageVersions on Paws::CodeArtifact
Paws::CodeArtifact::GetPackageVersionAsset(3): Arguments for method GetPackageVersionAsset on Paws::CodeArtifact
Paws::CodeArtifact::GetPackageVersionReadme(3): Arguments for method GetPackageVersionReadme on Paws::CodeArtifact
Paws::CodeArtifact::ListPackageVersionAssets(3): Arguments for method ListPackageVersionAssets on Paws::CodeArtifact
Paws::CodeArtifact::ListPackageVersionDependencies(3): Arguments for method ListPackageVersionDependencies on Paws::CodeArtifact
Paws::CodeArtifact::ListPackageVersions(3): Arguments for method ListPackageVersions on Paws::CodeArtifact
Paws::CodeArtifact::ListPackages(3): Arguments for method ListPackages on Paws::CodeArtifact
Paws::CodeArtifact::UpdatePackageVersionsStatus(3): Arguments for method UpdatePackageVersionsStatus on Paws::CodeArtifact
Paws::Config::DeleteConformancePack(3): Arguments for method DeleteConformancePack on Paws::Config
Paws::Config::DeleteOrganizationConformancePack(3): Arguments for method DeleteOrganizationConformancePack on Paws::Config
Paws::Config::DescribeAggregateComplianceByConformancePacks(3): Arguments for method DescribeAggregateComplianceByConformancePacks on Paws::Config
Paws::Config::DescribeConformancePackCompliance(3): Arguments for method DescribeConformancePackCompliance on Paws::Config
Paws::Config::DescribeConformancePackStatus(3): Arguments for method DescribeConformancePackStatus on Paws::Config
Paws::Config::DescribeConformancePacks(3): Arguments for method DescribeConformancePacks on Paws::Config
Paws::Config::DescribeOrganizationConformancePackStatuses(3): Arguments for method DescribeOrganizationConformancePackStatuses on Paws::Config
Paws::Config::DescribeOrganizationConformancePacks(3): Arguments for method DescribeOrganizationConformancePacks on Paws::Config
Paws::Config::GetAggregateConformancePackComplianceSummary(3): Arguments for method GetAggregateConformancePackComplianceSummary on Paws::Config
Paws::Config::GetConformancePackComplianceDetails(3): Arguments for method GetConformancePackComplianceDetails on Paws::Config
Paws::Config::GetConformancePackComplianceSummary(3): Arguments for method GetConformancePackComplianceSummary on Paws::Config
Paws::Config::GetOrganizationConformancePackDetailedStatus(3): Arguments for method GetOrganizationConformancePackDetailedStatus on Paws::Config
Paws::Config::PutConformancePack(3): Arguments for method PutConformancePack on Paws::Config
Paws::Config::PutOrganizationConformancePack(3): Arguments for method PutOrganizationConformancePack on Paws::Config
Paws::ES::AssociatePackage(3): Arguments for method AssociatePackage on Paws::ES
Paws::ES::CreatePackage(3): Arguments for method CreatePackage on Paws::ES
Paws::ES::DeletePackage(3): Arguments for method DeletePackage on Paws::ES
Paws::ES::DescribePackages(3): Arguments for method DescribePackages on Paws::ES
Paws::ES::DissociatePackage(3): Arguments for method DissociatePackage on Paws::ES
Paws::ES::GetPackageVersionHistory(3): Arguments for method GetPackageVersionHistory on Paws::ES
Paws::ES::ListDomainsForPackage(3): Arguments for method ListDomainsForPackage on Paws::ES
Paws::ES::ListPackagesForDomain(3): Arguments for method ListPackagesForDomain on Paws::ES
Paws::ES::UpdatePackage(3): Arguments for method UpdatePackage on Paws::ES
Paws::ImageBuilder::ListImagePackages(3): Arguments for method ListImagePackages on Paws::ImageBuilder
Paws::Inspector::DescribeRulesPackages(3): Arguments for method DescribeRulesPackages on Paws::Inspector
Paws::Inspector::ListRulesPackages(3): Arguments for method ListRulesPackages on Paws::Inspector
Paws::MediaPackage(3): Perl Interface to AWS AWS Elemental MediaPackage
Paws::MediaPackage::ConfigureLogs(3): Arguments for method ConfigureLogs on Paws::MediaPackage
Paws::MediaPackage::CreateChannel(3): Arguments for method CreateChannel on Paws::MediaPackage
Paws::MediaPackage::CreateHarvestJob(3): Arguments for method CreateHarvestJob on Paws::MediaPackage
Paws::MediaPackage::CreateOriginEndpoint(3): Arguments for method CreateOriginEndpoint on Paws::MediaPackage
Paws::MediaPackage::DeleteChannel(3): Arguments for method DeleteChannel on Paws::MediaPackage
Paws::MediaPackage::DeleteOriginEndpoint(3): Arguments for method DeleteOriginEndpoint on Paws::MediaPackage
Paws::MediaPackage::DescribeChannel(3): Arguments for method DescribeChannel on Paws::MediaPackage
Paws::MediaPackage::DescribeHarvestJob(3): Arguments for method DescribeHarvestJob on Paws::MediaPackage
Paws::MediaPackage::DescribeOriginEndpoint(3): Arguments for method DescribeOriginEndpoint on Paws::MediaPackage
Paws::MediaPackage::ListChannels(3): Arguments for method ListChannels on Paws::MediaPackage
Paws::MediaPackage::ListHarvestJobs(3): Arguments for method ListHarvestJobs on Paws::MediaPackage
Paws::MediaPackage::ListOriginEndpoints(3): Arguments for method ListOriginEndpoints on Paws::MediaPackage
Paws::MediaPackage::ListTagsForResource(3): Arguments for method ListTagsForResource on Paws::MediaPackage
Paws::MediaPackage::RotateChannelCredentials(3): Arguments for method RotateChannelCredentials on Paws::MediaPackage
Paws::MediaPackage::RotateIngestEndpointCredentials(3): Arguments for method RotateIngestEndpointCredentials on Paws::MediaPackage
Paws::MediaPackage::TagResource(3): Arguments for method TagResource on Paws::MediaPackage
Paws::MediaPackage::UntagResource(3): Arguments for method UntagResource on Paws::MediaPackage
Paws::MediaPackage::UpdateChannel(3): Arguments for method UpdateChannel on Paws::MediaPackage
Paws::MediaPackage::UpdateOriginEndpoint(3): Arguments for method UpdateOriginEndpoint on Paws::MediaPackage
Paws::MediaPackageVod(3): Perl Interface to AWS AWS Elemental MediaPackage VOD
Paws::MediaPackageVod::ConfigureLogs(3): Arguments for method ConfigureLogs on Paws::MediaPackageVod
Paws::MediaPackageVod::CreateAsset(3): Arguments for method CreateAsset on Paws::MediaPackageVod
Paws::MediaPackageVod::CreatePackagingConfiguration(3): Arguments for method CreatePackagingConfiguration on Paws::MediaPackageVod
Paws::MediaPackageVod::CreatePackagingGroup(3): Arguments for method CreatePackagingGroup on Paws::MediaPackageVod
Paws::MediaPackageVod::DeleteAsset(3): Arguments for method DeleteAsset on Paws::MediaPackageVod
Paws::MediaPackageVod::DeletePackagingConfiguration(3): Arguments for method DeletePackagingConfiguration on Paws::MediaPackageVod
Paws::MediaPackageVod::DeletePackagingGroup(3): Arguments for method DeletePackagingGroup on Paws::MediaPackageVod
Paws::MediaPackageVod::DescribeAsset(3): Arguments for method DescribeAsset on Paws::MediaPackageVod
Paws::MediaPackageVod::DescribePackagingConfiguration(3): Arguments for method DescribePackagingConfiguration on Paws::MediaPackageVod
Paws::MediaPackageVod::DescribePackagingGroup(3): Arguments for method DescribePackagingGroup on Paws::MediaPackageVod
Paws::MediaPackageVod::ListAssets(3): Arguments for method ListAssets on Paws::MediaPackageVod
Paws::MediaPackageVod::ListPackagingConfigurations(3): Arguments for method ListPackagingConfigurations on Paws::MediaPackageVod
Paws::MediaPackageVod::ListPackagingGroups(3): Arguments for method ListPackagingGroups on Paws::MediaPackageVod
Paws::MediaPackageVod::ListTagsForResource(3): Arguments for method ListTagsForResource on Paws::MediaPackageVod
Paws::MediaPackageVod::TagResource(3): Arguments for method TagResource on Paws::MediaPackageVod
Paws::MediaPackageVod::UntagResource(3): Arguments for method UntagResource on Paws::MediaPackageVod
Paws::MediaPackageVod::UpdatePackagingGroup(3): Arguments for method UpdatePackagingGroup on Paws::MediaPackageVod
Paws::SageMaker::CreateEdgePackagingJob(3): Arguments for method CreateEdgePackagingJob on Paws::SageMaker
Paws::SageMaker::CreateModelPackage(3): Arguments for method CreateModelPackage on Paws::SageMaker
Paws::SageMaker::CreateModelPackageGroup(3): Arguments for method CreateModelPackageGroup on Paws::SageMaker
Paws::SageMaker::DeleteModelPackage(3): Arguments for method DeleteModelPackage on Paws::SageMaker
Paws::SageMaker::DeleteModelPackageGroup(3): Arguments for method DeleteModelPackageGroup on Paws::SageMaker
Paws::SageMaker::DeleteModelPackageGroupPolicy(3): Arguments for method DeleteModelPackageGroupPolicy on Paws::SageMaker
Paws::SageMaker::DescribeEdgePackagingJob(3): Arguments for method DescribeEdgePackagingJob on Paws::SageMaker
Paws::SageMaker::DescribeModelPackage(3): Arguments for method DescribeModelPackage on Paws::SageMaker
Paws::SageMaker::DescribeModelPackageGroup(3): Arguments for method DescribeModelPackageGroup on Paws::SageMaker
Paws::SageMaker::GetModelPackageGroupPolicy(3): Arguments for method GetModelPackageGroupPolicy on Paws::SageMaker
Paws::SageMaker::ListEdgePackagingJobs(3): Arguments for method ListEdgePackagingJobs on Paws::SageMaker
Paws::SageMaker::ListModelPackageGroups(3): Arguments for method ListModelPackageGroups on Paws::SageMaker
Paws::SageMaker::ListModelPackages(3): Arguments for method ListModelPackages on Paws::SageMaker
Paws::SageMaker::PutModelPackageGroupPolicy(3): Arguments for method PutModelPackageGroupPolicy on Paws::SageMaker
Paws::SageMaker::StopEdgePackagingJob(3): Arguments for method StopEdgePackagingJob on Paws::SageMaker
Paws::SageMaker::UpdateModelPackage(3): Arguments for method UpdateModelPackage on Paws::SageMaker
Perl::Critic::Policy::Documentation::RequirePackageMatchesPodName(3): The "=head1 NAME" section should match the package
Perl::Critic::Policy::Modules::ProhibitMultiplePackages(3): Put packages (especially subclasses) in separate files
Perl::Critic::Policy::Modules::RequireExplicitPackage(3): Always make the "package" explicit
Perl::Critic::Policy::Modules::RequireFilenameMatchesPackage(3): Package declaration must match filename
Perl::Critic::Policy::Moose::RequireCleanNamespace(3): Require removing implementation details from you packages
Perl::Critic::Policy::Subroutines::ProtectPrivateSubs(3): Prevent access to private subs in other packages
Perl::Critic::Policy::Subroutines::RequireArgUnpacking(3): Always unpack "@_" first
Perl::Critic::Policy::ValuesAndExpressions::UnexpandedSpecialLiteral(3): specials like _|_PACKAGE_|_ used literally
Perl::Critic::Policy::Variables::ProhibitPackageVars(3): Eliminate globals declared with "our" or "use vars"
Perl::Critic::Policy::Variables::ProhibitPerl4PackageNames(3): Use double colon (::) to separate package name components instead of single quotes (')
Perl::Critic::Policy::Variables::ProtectPrivateVars(3): Prevent access to private vars in other packages
Perl::Metrics::Simple(3): Count packages, subs, lines, etc. of many files
PkgConfig::LibPkgConf::Package(3): Represents a package
Plagger::Plugin::Bundle::Planet(3): Bundle package to create Planet site
Psh::PerlEval(3): package containing perl evaluation codes
RDF::Core::Function(3): a package of functions for query language
RDR::Collector(3): Collect RDRv1 packets
RDR::Processor(3): Decodes RDRv1 packets
RT::Client::REST::Forms(3): This package provides functions from RT::Interface::REST, because we don't want to depend on rt being installed. Derived from rt 3.4.5
Reply::Plugin::Autocomplete::Packages(3): tab completion for package names
Reply::Plugin::Packages(3): persist the current package between lines
ResourcePool::UML(3): UML diagram for the ResourcePool package
Rex::Commands::Pkg(3): Install/Remove Software packages
Rex::Commands::PkgConf(3): Configure packages
Rinci::package(3): Metadata for your namespaces/packages
SNMP::Info::Layer3::PacketFront(3): SNMP Interface to PacketFront devices
SOAP::Lite::Packager(3): this class is an abstract class which allows for multiple types of packaging agents such as MIME and DIME
SOAP::Packager(3): this class is an abstract class which allows for multiple types of packaging agents such as MIME and DIME
SOAP::Utils(3): a utility package for SOAP::Lite
Selenium::InternetExplorer(3): A convenience package for creating a IE instance
Shell::EnvImporter::Result(3), package Shell::EnvImporter::Result(3): Results of a Shell::EnvImporter run
Shell::EnvImporter::Shell(3), package Shell::EnvImporter::Shell(3): Shell abstraction for Shell::EnvImporter
Software::License(3): packages that provide templated software licenses
Software::License::CCpack(3): Software::License pack for Creative Commons' licenses
Specio::Registry(3): Implements the per-package type registry
Statistics::Regression(3), Regression.pm(3): weighted linear regression package (line+plane fitting)
Sub::Install(3): install subroutines into packages easily
Sub::Installer(3): A cleaner way to install (or reinstall) package subroutines
Sub::WrapPackages(3): add pre- and post-execution wrappers around all the subroutines in packages or around individual subs
SyslogScan::SendmailUtil(3), SendmailUtil.pm(3): -- utilities for sendmail packages
Term::ReadLine(3): Perl interface to various "readline" packages. If no real package is found, substitutes stubs instead of basic functions
Term::ReadLine::Zoid(3): another ReadLine package
Test2::Require(3): Base class and documentation for skip-unless type test packages
Test2::Require::Module(3): Skip tests if certain packages are not installed, or insufficient versions
Test2::Tools::Target(3): Alias the testing target package
Test::Mock::LWP(3): Easy mocking of LWP packages
Test::Moose::More(3): More tools for testing Moose packages
Text::MicroMason::AllowGlobals(3): Share package vars between templates
Tie::Array::Pack(3): An array implemented as a packed string
Tk::Adjuster(3): Allow size of packed widgets to be adjusted by user
Tk::pack(3): Geometry manager that packs around edges of cavity
URI::ws(3): WebSocket support for URI package
URI::wss(3): Secure WebSocket support for URI package
Verilog::Std(3): SystemVerilog Built-in std Package Definition
Vimana::Command::Download(3): download a vim plugin package
Vimana::Command::Install(3): install a vim plugin package
WDDX(3), WDDX.pm(3): Module for reading and writing WDDX packets
WebService::BuzzurlAPI::Request(3): Buzzurl WebService API request package
WebService::BuzzurlAPI::Response(3): Buzzurl WebService API response package
WebService::GData::Serialize(3): Factory class that loads the proper serialize package
X11::Xlib::Struct(3): Base class for X11 packed structures
XML::DT(3): a package for down translation of XML files
XMLTV::Date(3): Date parsing routines for the xmltv package
Zenoss::Router::ZenPack(3): A JSON/ExtDirect interface to operations on ZenPacks
accessors(3): create accessor methods in caller's package
accessors::chained(3): create method chaining accessors in caller's package
accessors::classic(3): create 'classic' read/write accessor methods in caller's package
accessors::ro(3): create 'classic' read-only accessor methods in caller's package
accessors::rw(3): create 'classic' read/write accessor methods in caller's package
anongitssh(1): restricted shell for git-upload-pack over SSH
aria_pack(1): generate compressed, read-only Aria tables
autodie::skip(3): Skip a package when throwing autodie exceptions
autopano-sift-c(7), autopano-sift(7): Automatic panorama stitching package
bk-clone(1), bk clone(1): create a new copy of a package
bk-id(1), bk id(1): display the identity of a package or repository
bk-import(1), bk import(1): import files or changes into a package
bk-setup(1), bk setup(1): create a new package
blib(3): Use MakeMaker's uninstalled version of a package
cargo(1): The Rust package manager
cargo-bench(1): Execute benchmarks of a package
cargo-build(1): Compile the current package
cargo-check(1): Check the current package
cargo-doc(1): Build a package's documentation
cargo-fetch(1): Fetch dependencies of a package from the network
cargo-generate-lockfile(1): Generate the lockfile for a package
cargo-init(1): Create a new Cargo package in an existing directory
cargo-metadata(1): Machine-readable metadata about the current package
cargo-new(1): Create a new Cargo package
cargo-package(1): Assemble the local package into a distributable tarball
cargo-pkgid(1): Print a fully qualified package specification
cargo-publish(1): Upload a package to the registry
cargo-run(1): Run the current package
cargo-rustc(1): Compile the current package, and pass extra options to the compiler
cargo-rustdoc(1): Build a package's documentation, using specified custom flags
cargo-search(1): Search packages in crates.io
cargo-test(1): Execute unit and integration tests of a package
certbot(1): certbot script documentation 0.0 3.5 C usage: certbot [SUBCOMMAND] [options] [-d DOMAIN] [-d DOMAIN] ... Certbot can obtain and install HTTPS/TLS/SSL certificates. By default, it will attempt to use a webserver both for obtaining and installing the certificate. The most common SUBCOMMANDS and flags are: obtain, install, and renew certificates: (default) run Obtain & install a certificate in your current webserver certonly Obtain or renew a certificate, but do not install it renew Renew all previously obtained certificates that are near expiry enhance Add security enhancements to your existing configuration -d DOMAINS Comma-separated list of domains to obtain a certificate for --apache Use the Apache plugin for authentication & installation --standalone Run a standalone webserver for authentication --nginx Use the Nginx plugin for authentication & installation --webroot Place files in a server(aqs webroot folder for authentication --manual Obtain certificates interactively, or using shell script hooks -n Run non-interactively --test-cert Obtain a test certificate from a staging server --dry-run Test "renew" or "certonly" without saving any certificates to disk manage certificates: certificates Display information about certificates you have from Certbot revoke Revoke a certificate (supply --cert-name or --cert-path) delete Delete a certificate (supply --cert-name) manage your account: register Create an ACME account unregister Deactivate an ACME account update_account Update an ACME account show_account Display account details --agree-tos Agree to the ACME server(aqs Subscriber Agreement -m EMAIL Email address for important account notifications optional arguments: -h, --help show this help message and exit -c CONFIG_FILE, --config CONFIG_FILE path to config file (default: /etc/letsencrypt/cli.ini and ~/.config/letsencrypt/cli.ini) -v, --verbose This flag can be used multiple times to incrementally increase the verbosity of output, e.g. -vvv. (default: 0) --max-log-backups MAX_LOG_BACKUPS Specifies the maximum number of backup logs that should be kept by Certbot(aqs built in log rotation. Setting this flag to 0 disables log rotation entirely, causing Certbot to always append to the same log file. (default: 1000) -n, --non-interactive, --noninteractive Run without ever asking for user input. This may require additional command line flags; the client will try to explain which ones are required if it finds one missing (default: False) --force-interactive Force Certbot to be interactive even if it detects it(aqs not being run in a terminal. This flag cannot be used with the renew subcommand. (default: False) -d DOMAIN, --domains DOMAIN, --domain DOMAIN Domain names to apply. For multiple domains you can use multiple -d flags or enter a comma separated list of domains as a parameter. The first domain provided will be the subject CN of the certificate, and all domains will be Subject Alternative Names on the certificate. The first domain will also be used in some software user interfaces and as the file paths for the certificate and related material unless otherwise specified or you already have a certificate with the same name. In the case of a name collision it will append a number like 0001 to the file path name. (default: Ask) --eab-kid EAB_KID Key Identifier for External Account Binding (default: None) --eab-hmac-key EAB_HMAC_KEY HMAC key for External Account Binding (default: None) --cert-name CERTNAME Certificate name to apply. This name is used by Certbot for housekeeping and in file paths; it doesn(aqt affect the content of the certificate itself. To see certificate names, run (aqcertbot certificates(aq. When creating a new certificate, specifies the new certificate(aqs name. (default: the first provided domain or the name of an existing certificate on your system for the same domains) --dry-run Perform a test run of the client, obtaining test (invalid) certificates but not saving them to disk. This can currently only be used with the (aqcertonly(aq and (aqrenew(aq subcommands. Note: Although --dry-run tries to avoid making any persistent changes on a system, it is not completely side-effect free: if used with webserver authenticator plugins like apache and nginx, it makes and then reverts temporary config changes in order to obtain test certificates, and reloads webservers to deploy and then roll back those changes. It also calls --pre-hook and --post-hook commands if they are defined because they may be necessary to accurately simulate renewal. --deploy- hook commands are not called. (default: False) --debug-challenges After setting up challenges, wait for user input before submitting to CA. When used in combination with the (ga-v(ga option, the challenge URLs or FQDNs and their expected return values are shown. (default: False) --preferred-chain PREFERRED_CHAIN Set the preferred certificate chain. If the CA offers multiple certificate chains, prefer the chain whose topmost certificate was issued from this Subject Common Name. If no match, the default offered chain will be used. (default: None) --preferred-challenges PREF_CHALLS A sorted, comma delimited list of the preferred challenge to use during authorization with the most preferred challenge listed first (Eg, "dns" or "http,dns"). Not all plugins support all challenges. See https://certbot.eff.org/docs/using.html#plugins for details. ACME Challenges are versioned, but if you pick "http" rather than "http-01", Certbot will select the latest version automatically. (default: []) --issuance-timeout ISSUANCE_TIMEOUT This option specifies how long (in seconds) Certbot will wait for the server to issue a certificate. (default: 90) --user-agent USER_AGENT Set a custom user agent string for the client. User agent strings allow the CA to collect high level statistics about success rates by OS, plugin and use case, and to know when to deprecate support for past Python versions and flags. If you wish to hide this information from the Let(aqs Encrypt server, set this to "". (default: CertbotACMEClient/1.30.0 (certbot; OS_NAME OS_VERSION) Authenticator/XXX Installer/YYY (SUBCOMMAND; flags: FLAGS) Py/major.minor.patchlevel). The flags encoded in the user agent are: --duplicate, --force-renew, --allow-subset-of-names, -n, and whether any hooks are set. --user-agent-comment USER_AGENT_COMMENT Add a comment to the default user agent string. May be used when repackaging Certbot or calling it from another tool to allow additional statistical data to be collected. Ignored if --user-agent is set. (Example: Foo-Wrapper/1.0) (default: None) automation: Flags for automating execution & other tweaks --keep-until-expiring, --keep, --reinstall If the requested certificate matches an existing certificate, always keep the existing one until it is due for renewal (for the (aqrun(aq subcommand this means reinstall the existing certificate). (default: Ask) --expand If an existing certificate is a strict subset of the requested names, always expand and replace it with the additional names. (default: Ask) --version show program(aqs version number and exit --force-renewal, --renew-by-default If a certificate already exists for the requested domains, renew it now, regardless of whether it is near expiry. (Often --keep-until-expiring is more appropriate). Also implies --expand. (default: False) --renew-with-new-domains If a certificate already exists for the requested certificate name but does not match the requested domains, renew it now, regardless of whether it is near expiry. (default: False) --reuse-key When renewing, use the same private key as the existing certificate. (default: False) --no-reuse-key When renewing, do not use the same private key as the existing certificate. Not reusing private keys is the default behavior of Certbot. This option may be used to unset --reuse-key on an existing certificate. (default: False) --new-key When renewing or replacing a certificate, generate a new private key, even if --reuse-key is set on the existing certificate. Combining --new-key and --reuse- key will result in the private key being replaced and then reused in future renewals. (default: False) --allow-subset-of-names When performing domain validation, do not consider it a failure if authorizations can not be obtained for a strict subset of the requested domains. This may be useful for allowing renewals for multiple domains to succeed even if some domains no longer point at this system. This option cannot be used with --csr. (default: False) --agree-tos Agree to the ACME Subscriber Agreement (default: Ask) --duplicate Allow making a certificate lineage that duplicates an existing one (both can be renewed in parallel) (default: False) -q, --quiet Silence all output except errors. Useful for automation via cron. Implies --non-interactive. (default: False) security: Security parameters & server settings --rsa-key-size N Size of the RSA key. (default: 2048) --key-type {rsa,ecdsa} Type of generated private key. Only *ONE* per invocation can be provided at this time. (default: rsa) --elliptic-curve N The SECG elliptic curve name to use. Please see RFC 8446 for supported values. (default: secp256r1) --must-staple Adds the OCSP Must-Staple extension to the certificate. Autoconfigures OCSP Stapling for supported setups (Apache version >= 2.3.3 ). (default: False) --redirect Automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --no-redirect Do not automatically redirect all HTTP traffic to HTTPS for the newly authenticated vhost. (default: redirect enabled for install and run, disabled for enhance) --hsts Add the Strict-Transport-Security header to every HTTP response. Forcing browser to always use SSL for the domain. Defends against SSL Stripping. (default: None) --uir Add the "Content-Security-Policy: upgrade-insecure- requests" header to every HTTP response. Forcing the browser to use https:// for every http:// resource. (default: None) --staple-ocsp Enables OCSP Stapling. A valid OCSP response is stapled to the certificate that the server offers during TLS. (default: None) --strict-permissions Require that all configuration files are owned by the current user; only needed if your config is somewhere unsafe like /tmp/ (default: False) --auto-hsts Gradually increasing max-age value for HTTP Strict Transport Security security header (default: False) testing: The following flags are meant for testing and integration purposes only. --test-cert, --staging Use the staging server to obtain or revoke test (invalid) certificates; equivalent to --server https://acme-staging-v02.api.letsencrypt.org/directory (default: False) --debug Show tracebacks in case of errors (default: False) --no-verify-ssl Disable verification of the ACME server(aqs certificate. The root certificates trusted by Certbot can be overriden by setting the REQUESTS_CA_BUNDLE environment variable. (default: False) --http-01-port HTTP01_PORT Port used in the http-01 challenge. This only affects the port Certbot listens on. A conforming ACME server will still attempt to connect on port 80. (default: 80) --http-01-address HTTP01_ADDRESS The address the server listens to during http-01 challenge. (default: ) --https-port HTTPS_PORT Port used to serve HTTPS. This affects which port Nginx will listen on after a LE certificate is installed. (default: 443) --break-my-certs Be willing to replace or renew valid certificates with invalid (testing/staging) certificates (default: False) paths: Flags for changing execution paths & servers --cert-path CERT_PATH Path to where certificate is saved (with certonly --csr), installed from, or revoked (default: None) --key-path KEY_PATH Path to private key for certificate installation or revocation (if account key is missing) (default: None) --fullchain-path FULLCHAIN_PATH Accompanying path to a full certificate chain (certificate plus chain). (default: None) --chain-path CHAIN_PATH Accompanying path to a certificate chain. (default: None) --config-dir CONFIG_DIR Configuration directory. (default: /etc/letsencrypt) --work-dir WORK_DIR Working directory. (default: /var/lib/letsencrypt) --logs-dir LOGS_DIR Logs directory. (default: /var/log/letsencrypt) --server SERVER ACME Directory Resource URI. (default: https://acme-v02.api.letsencrypt.org/directory) manage: Various subcommands and flags are available for managing your certificates: certificates List certificates managed by Certbot delete Clean up all files related to a certificate renew Renew all certificates (or one specified with --cert- name) revoke Revoke a certificate specified with --cert-path or --cert-name update_symlinks Recreate symlinks in your /etc/letsencrypt/live/ directory run: Options for obtaining & installing certificates certonly: Options for modifying how a certificate is obtained --csr CSR Path to a Certificate Signing Request (CSR) in DER or PEM format. Currently --csr only works with the (aqcertonly(aq subcommand. (default: None) renew: The (aqrenew(aq subcommand will attempt to renew any certificates previously obtained if they are close to expiry, and print a summary of the results. By default, (aqrenew(aq will reuse the plugins and options used to obtain or most recently renew each certificate. You can test whether future renewals will succeed with (ga--dry-run(ga. Individual certificates can be renewed with the (ga--cert-name(ga option. Hooks are available to run commands before and after renewal; see https://certbot.eff.org/docs/using.html#renewal for more information on these. --pre-hook PRE_HOOK Command to be run in a shell before obtaining any certificates. Intended primarily for renewal, where it can be used to temporarily shut down a webserver that might conflict with the standalone plugin. This will only be called if a certificate is actually to be obtained/renewed. When renewing several certificates that have identical pre-hooks, only the first will be executed. (default: None) --post-hook POST_HOOK Command to be run in a shell after attempting to obtain/renew certificates. Can be used to deploy renewed certificates, or to restart any servers that were stopped by --pre-hook. This is only run if an attempt was made to obtain/renew a certificate. If multiple renewed certificates have identical post- hooks, only one will be run. (default: None) --deploy-hook DEPLOY_HOOK Command to be run in a shell once for each successfully issued certificate. For this command, the shell variable $RENEWED_LINEAGE will point to the config live subdirectory (for example, "/etc/letsencrypt/live/example.com") containing the new certificates and keys; the shell variable $RENEWED_DOMAINS will contain a space-delimited list of renewed certificate domains (for example, "example.com www.example.com") (default: None) --disable-hook-validation Ordinarily the commands specified for --pre- hook/--post-hook/--deploy-hook will be checked for validity, to see if the programs being run are in the $PATH, so that mistakes can be caught early, even when the hooks aren(aqt being run just yet. The validation is rather simplistic and fails if you use more advanced shell constructs, so you can use this switch to disable it. (default: False) --no-directory-hooks Disable running executables found in Certbot(aqs hook directories during renewal. (default: False) --disable-renew-updates Disable automatic updates to your server configuration that would otherwise be done by the selected installer plugin, and triggered when the user executes "certbot renew", regardless of if the certificate is renewed. This setting does not apply to important TLS configuration updates. (default: False) --no-autorenew Disable auto renewal of certificates. (default: False) certificates: List certificates managed by Certbot delete: Options for deleting a certificate revoke: Options for revocation of certificates --reason {unspecified,keycompromise,affiliationchanged,superseded,cessationofoperation} Specify reason for revoking certificate. (default: unspecified) --delete-after-revoke Delete certificates after revoking them, along with all previous and later versions of those certificates. (default: None) --no-delete-after-revoke Do not delete certificates after revoking them. This option should be used with caution because the (aqrenew(aq subcommand will attempt to renew undeleted revoked certificates. (default: None) register: Options for account registration --register-unsafely-without-email Specifying this flag enables registering an account with no email address. This is strongly discouraged, because you will be unable to receive notice about impending expiration or revocation of your certificates or problems with your Certbot installation that will lead to failure to renew. (default: False) -m EMAIL, --email EMAIL Email used for registration and recovery contact. Use comma to register multiple emails, ex: u1@example.com,u2@example.com. (default: Ask). --eff-email Share your e-mail address with EFF (default: None) --no-eff-email Don(aqt share your e-mail address with EFF (default: None) update_account: Options for account modification unregister: Options for account deactivation. --account ACCOUNT_ID Account ID to use (default: None) install: Options for modifying how a certificate is deployed rollback: Options for rolling back server configuration changes --checkpoints N Revert configuration N number of checkpoints. (default: 1) plugins: Options for the "plugins" subcommand --init Initialize plugins. (default: False) --prepare Initialize and prepare plugins. (default: False) --authenticators Limit to authenticator plugins only. (default: None) --installers Limit to installer plugins only. (default: None) update_symlinks: Recreates certificate and key symlinks in /etc/letsencrypt/live, if you changed them by hand or edited a renewal configuration file enhance: Helps to harden the TLS configuration by adding security enhancements to already existing configuration. show_account: Options useful for the "show_account" subcommand: plugins: Plugin Selection: Certbot client supports an extensible plugins architecture. See (aqcertbot plugins(aq for a list of all installed plugins and their names. You can force a particular plugin by setting options provided below. Running --help <plugin_name> will list flags specific to that plugin. --configurator CONFIGURATOR Name of the plugin that is both an authenticator and an installer. Should not be used together with --authenticator or --installer. (default: Ask) -a AUTHENTICATOR, --authenticator AUTHENTICATOR Authenticator plugin name. (default: None) -i INSTALLER, --installer INSTALLER Installer plugin name (also used to find domains). (default: None) --apache Obtain and install certificates using Apache (default: False) --nginx Obtain and install certificates using Nginx (default: False) --standalone Obtain certificates using a "standalone" webserver. (default: False) --manual Provide laborious manual instructions for obtaining a certificate (default: False) --webroot Obtain certificates by placing files in a webroot directory. (default: False) --dns-cloudflare Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). (default: False) --dns-cloudxns Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). (default: False) --dns-digitalocean Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). (default: False) --dns-dnsimple Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). (default: False) --dns-dnsmadeeasy Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). (default: False) --dns-gehirn Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). (default: False) --dns-google Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS). (default: False) --dns-linode Obtain certificates using a DNS TXT record (if you are using Linode for DNS). (default: False) --dns-luadns Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). (default: False) --dns-nsone Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). (default: False) --dns-ovh Obtain certificates using a DNS TXT record (if you are using OVH for DNS). (default: False) --dns-rfc2136 Obtain certificates using a DNS TXT record (if you are using BIND for DNS). (default: False) --dns-route53 Obtain certificates using a DNS TXT record (if you are using Route53 for DNS). (default: False) --dns-sakuracloud Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). (default: False) apache: Apache Web Server plugin (Please note that the default values of the Apache plugin options change depending on the operating system Certbot is run on.) --apache-enmod APACHE_ENMOD Path to the Apache (aqa2enmod(aq binary (default: None) --apache-dismod APACHE_DISMOD Path to the Apache (aqa2dismod(aq binary (default: None) --apache-le-vhost-ext APACHE_LE_VHOST_EXT SSL vhost configuration extension (default: -le- ssl.conf) --apache-server-root APACHE_SERVER_ROOT Apache server root directory (default: /etc/apache2) --apache-vhost-root APACHE_VHOST_ROOT Apache server VirtualHost configuration root (default: None) --apache-logs-root APACHE_LOGS_ROOT Apache server logs directory (default: /var/log/apache2) --apache-challenge-location APACHE_CHALLENGE_LOCATION Directory path for challenge configuration (default: /etc/apache2) --apache-handle-modules APACHE_HANDLE_MODULES Let installer handle enabling required modules for you (Only Ubuntu/Debian currently) (default: False) --apache-handle-sites APACHE_HANDLE_SITES Let installer handle enabling sites for you (Only Ubuntu/Debian currently) (default: False) --apache-ctl APACHE_CTL Full path to Apache control script (default: apache2ctl) --apache-bin APACHE_BIN Full path to apache2/httpd binary (default: None) dns-cloudflare: Obtain certificates using a DNS TXT record (if you are using Cloudflare for DNS). --dns-cloudflare-propagation-seconds DNS_CLOUDFLARE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-cloudflare-credentials DNS_CLOUDFLARE_CREDENTIALS Cloudflare credentials INI file. (default: None) dns-cloudxns: Obtain certificates using a DNS TXT record (if you are using CloudXNS for DNS). --dns-cloudxns-propagation-seconds DNS_CLOUDXNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-cloudxns-credentials DNS_CLOUDXNS_CREDENTIALS CloudXNS credentials INI file. (default: None) dns-digitalocean: Obtain certificates using a DNS TXT record (if you are using DigitalOcean for DNS). --dns-digitalocean-propagation-seconds DNS_DIGITALOCEAN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) --dns-digitalocean-credentials DNS_DIGITALOCEAN_CREDENTIALS DigitalOcean credentials INI file. (default: None) dns-dnsimple: Obtain certificates using a DNS TXT record (if you are using DNSimple for DNS). --dns-dnsimple-propagation-seconds DNS_DNSIMPLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-dnsimple-credentials DNS_DNSIMPLE_CREDENTIALS DNSimple credentials INI file. (default: None) dns-dnsmadeeasy: Obtain certificates using a DNS TXT record (if you are using DNS Made Easy for DNS). --dns-dnsmadeeasy-propagation-seconds DNS_DNSMADEEASY_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-dnsmadeeasy-credentials DNS_DNSMADEEASY_CREDENTIALS DNS Made Easy credentials INI file. (default: None) dns-gehirn: Obtain certificates using a DNS TXT record (if you are using Gehirn Infrastructure Service for DNS). --dns-gehirn-propagation-seconds DNS_GEHIRN_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-gehirn-credentials DNS_GEHIRN_CREDENTIALS Gehirn Infrastructure Service credentials file. (default: None) dns-google: Obtain certificates using a DNS TXT record (if you are using Google Cloud DNS for DNS). --dns-google-propagation-seconds DNS_GOOGLE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-google-credentials DNS_GOOGLE_CREDENTIALS Path to Google Cloud DNS service account JSON file. (See https://developers.google.com/identity/protocols/ OAuth2ServiceAccount#creatinganaccount forinformation about creating a service account and https://cloud.google.com/dns/access- control#permissions_and_roles for information about therequired permissions.) (default: None) dns-linode: Obtain certificates using a DNS TXT record (if you are using Linode for DNS). --dns-linode-propagation-seconds DNS_LINODE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-linode-credentials DNS_LINODE_CREDENTIALS Linode credentials INI file. (default: None) dns-luadns: Obtain certificates using a DNS TXT record (if you are using LuaDNS for DNS). --dns-luadns-propagation-seconds DNS_LUADNS_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-luadns-credentials DNS_LUADNS_CREDENTIALS LuaDNS credentials INI file. (default: None) dns-nsone: Obtain certificates using a DNS TXT record (if you are using NS1 for DNS). --dns-nsone-propagation-seconds DNS_NSONE_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 30) --dns-nsone-credentials DNS_NSONE_CREDENTIALS NS1 credentials file. (default: None) dns-ovh: Obtain certificates using a DNS TXT record (if you are using OVH for DNS). --dns-ovh-propagation-seconds DNS_OVH_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 120) --dns-ovh-credentials DNS_OVH_CREDENTIALS OVH credentials INI file. (default: None) dns-rfc2136: Obtain certificates using a DNS TXT record (if you are using BIND for DNS). --dns-rfc2136-propagation-seconds DNS_RFC2136_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 60) --dns-rfc2136-credentials DNS_RFC2136_CREDENTIALS RFC 2136 credentials INI file. (default: None) dns-route53: Obtain certificates using a DNS TXT record (if you are using AWS Route53 for DNS). --dns-route53-propagation-seconds DNS_ROUTE53_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 10) dns-sakuracloud: Obtain certificates using a DNS TXT record (if you are using Sakura Cloud for DNS). --dns-sakuracloud-propagation-seconds DNS_SAKURACLOUD_PROPAGATION_SECONDS The number of seconds to wait for DNS to propagate before asking the ACME server to verify the DNS record. (default: 90) --dns-sakuracloud-credentials DNS_SAKURACLOUD_CREDENTIALS Sakura Cloud credentials file. (default: None) manual: Authenticate through manual configuration or custom shell scripts. When using shell scripts, an authenticator script must be provided. The environment variables available to this script depend on the type of challenge. $CERTBOT_DOMAIN will always contain the domain being authenticated. For HTTP-01 and DNS-01, $CERTBOT_VALIDATION is the validation string, and $CERTBOT_TOKEN is the filename of the resource requested when performing an HTTP-01 challenge. An additional cleanup script can also be provided and can use the additional variable $CERTBOT_AUTH_OUTPUT which contains the stdout output from the auth script. For both authenticator and cleanup script, on HTTP-01 and DNS-01 challenges, $CERTBOT_REMAINING_CHALLENGES will be equal to the number of challenges that remain after the current one, and $CERTBOT_ALL_DOMAINS contains a comma-separated list of all domains that are challenged for the current certificate. --manual-auth-hook MANUAL_AUTH_HOOK Path or command to execute for the authentication script (default: None) --manual-cleanup-hook MANUAL_CLEANUP_HOOK Path or command to execute for the cleanup script (default: None) nginx: Nginx Web Server plugin --nginx-server-root NGINX_SERVER_ROOT Nginx server root directory. (default: /etc/nginx or /usr/local/etc/nginx) --nginx-ctl NGINX_CTL Path to the (aqnginx(aq binary, used for (aqconfigtest(aq and retrieving nginx version number. (default: nginx) --nginx-sleep-seconds NGINX_SLEEP_SECONDS Number of seconds to wait for nginx configuration changes to apply when reloading. (default: 1) null: Null Installer standalone: Spin up a temporary webserver webroot: Place files in webroot directory --webroot-path WEBROOT_PATH, -w WEBROOT_PATH public_html / webroot path. This can be specified multiple times to handle different domains; each domain will have the webroot path that preceded it. For instance: (ga-w /var/www/example -d example.com -d www.example.com -w /var/www/thing -d thing.net -d m.thing.net(ga (default: Ask) --webroot-map WEBROOT_MAP JSON dictionary mapping domains to webroot paths; this implies -d for each entry. You may need to escape this from your shell. E.g.: --webroot-map (aq{"eg1.is,m.eg1.is":"/www/eg1/", "eg2.is":"/www/eg2"}(aq This option is merged with, but takes precedence over, -w / -d entries. At present, if you put webroot-map in a config file, it needs to be on a single line, like: webroot-map = {"example.com":"/var/www"}. (default: {}) P
countperl(1): count lines, packages, subs and complexity of Perl files
cpanm(1): get, unpack build and install modules from CPAN
cpansite(1): -- extend CPAN with private packages
createpkg(1), createpkg (1): bundles a Ch Package directory for installation
csg_boltzmann(1): Part of the VOTCA package
csg_call(1): Part of the VOTCA package
csg_density(1): Part of the VOTCA package
csg_dlptopol(1): Part of the VOTCA package
csg_dump(1): Part of the VOTCA package
csg_fluctuations(1): Part of the VOTCA package
csg_fmatch(1): Part of the VOTCA package
csg_gmxtopol(1): Part of the VOTCA package
csg_imc_solve(1): Part of the VOTCA package
csg_inverse(1): Part of the VOTCA package
csg_map(1): Part of the VOTCA package
csg_orientcorr(1): Part of the VOTCA package
csg_part_dist(1): Part of the VOTCA package
csg_partial_rdf(1): Part of the VOTCA package
csg_property(1): Part of the VOTCA package
csg_radii(1): Part of the VOTCA package
csg_resample(1): Part of the VOTCA package
csg_reupdate(1): Part of the VOTCA package
csg_sphericalorder(1): Part of the VOTCA package
csg_stat(1): Part of the VOTCA package
csg_traj_force(1): Part of the VOTCA package
fatpack(1): Command line frontend for App::FatPacker

hexpeek(1): edit, dump, pack, and diff binary files in hex and bits
installcheck(1): find out which packages cannot be installed
installpkg(1), installpkg (1): installs a Ch Package
jpackage(1): tool for packaging self-contained Java applications
libsolv(3): package dependency solver library using a satisfiability algorithm
measureperl(1): count lines, packages, subs and complexity of Perl files
measureperl-checkstyle(1): count lines, packages, subs and complexity of Perl files
mpm(1): MiKTeX package manager
myisampack(1): generate compressed, read-only MyISAM tables
net-mqtt-trace(1): Perl script for decoding MQTT messages from IP packets
npm(1): a JavaScript package manager Build Status https://img.shields.io/travis/npm/cli/latest.svg https://travis-ci.org/npm/cli
npm(1): javascript package manager
npm-access(1): Set access level on published packages
npm-bugs(1): Report bugs for a package in a web browser
npm-build(1): Build a package
npm-cache(1): Manipulates packages cache
npm-dedupe(1): Reduce duplication in the package tree
npm-deprecate(1): Deprecate a version of a package
npm-dist-tag(1): Modify package distribution tags
npm-docs(1): Open documentation for a package in a web browser
npm-edit(1): Edit an installed package
npm-exec(1): Run a command from a local or remote npm package
npm-explain(1): Explain installed packages
npm-explore(1): Browse an installed package
npm-find-dupes(1): Find duplication in the package tree
npm-init(1): Create a package.json file
npm-install(1): Install a package
npm-install-test(1): Install package(s) and run tests
npm-link(1): Symlink a package folder
npm-ls(1): List installed packages
npm-outdated(1): Check for outdated packages
npm-owner(1): Manage package owners
npm-pack(1): Create a tarball from a package
npm-pkg(1): Manages your package.json
npm-prune(1): Remove extraneous packages
npm-publish(1): Publish a package
npm-rebuild(1): Rebuild a package
npm-repo(1): Open package repository page in the browser
npm-restart(1): Restart a package
npm-run-script(1): Run arbitrary package scripts
npm-search(1): Search for packages
npm-set-script(1): Set tasks in the scripts section of package.json
npm-star(1): Mark your favorite packages
npm-stars(1): View packages marked as favorites
npm-start(1): Start a package
npm-stop(1): Stop a package
npm-test(1): Test a package
npm-uninstall(1): Remove a package
npm-unpublish(1): Remove a package from the registry
npm-unstar(1): Remove an item from your favorite packages
npm-update(1): Update packages
npm-version(1): Bump a package version
npx(1): Run a command from a local or remote npm package
orepan2-audit(1): 02packages auditor
overload(3): Package for overloading Perl operations
pack200(1): Packages a JAR file into a compressed pack200 file for web deployment
package-json(5), package.json(5): Specifics of npm's package.json handling
package-lock-json(5), package-lock.json(5): A manifestation of the manifest
package-locks(5): An explanation of npm lockfiles
package-spec(7): Package name specifier
perlhpux(1): Perl version 5 on Hewlett-Packard Unix (HP-UX) systems
perlmod(1): Perl modules (packages and symbol tables)
perlpacktut(1): tutorial on "pack" and "unpack"
perlutil(1): utilities packaged with the Perl distribution
pgpdump(1): A PGP packet visualizer
pkg_replace(1): a utility for upgrading installed packages
pkginstall(1), pkginstall (1): install a Ch package from the current directory
plumb(3), eplumb(3), plumbfree(3), plumbopen(3), plumbunmount(3), plumbopenfid(3), plumbsend(3), plumbsendtofid(3), plumbsendtext(3), plumblookup(3), plumbpack(3), plumbpackattr(3), plumbaddattr(3), plumbdelattr(3), plumbrecv(3), plumbrecvfid(3), plumbunpack(3), plumbunpackpartial(3), plumbunpackattr(3), Plumbmsg (3): plumb messages
pod::Prima::Widget::pack(3), Prima::Widget::pack(3): Geometry manager that packs around edges of cavity
pp(3): PAR Packager
r.pack(1), r.pack (1): Exports a raster map as GRASS GIS specific archive file
r.unpack(1), r.unpack (1): Imports a GRASS GIS specific raster archive file (packed with r.pack) as a raster map
randpkt(1): Random packet generator
registry(7): The JavaScript Package Registry
release_handler(3): Unpacking and Installation of Release Packages
rntrack(1), RNtrack(1): mail tracker and packer for FTN-networks
rtpdump.pl(1): Parse and display incoming RTP packet headers
rtplosslog.pl(1): Log packet loss for a RTP session every minute
rtpstats.pl(1): Displays packet statistics for an RTP session
rtptimer.pl(1): Displays arrival times of incoming RTP packet headers
scope(7): Scoped packages
self::init(3): Invoke package init methods at compile time
sniffit(8): packet sniffer and monitoring tool
solv(1): example package manager based on libsolv
spkg.pl(1), spkg(1): Create Perl packages for HTML files for HTML::Seamstress manipulation
text2pcap(1): Generate a capture file from an ASCII hexdump of packets
tstatd(1): Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
udpdump(1): Provide an UDP receiver that gets packets from network devices (like Aruba routers) and exports them in PCAP format
udpread(3), udpwrite(3): read and write UDP packets
unpack200(1): Transforms a packed file produced by pack200(1) into a JAR file for web deployment
use-devel-assertos(1): a script to package Devel::AssertOS modules with your code
use-devel-checklib(1): (DEPRECATED)a script to package Devel::CheckLib with your code
v.out.ogr(1), v.out.ogr (1): Exports a vector map layer to any of the supported OGR vector formats. By default a vector map layer is exported to OGC GeoPackage format
v.pack(1), v.pack (1): Exports a vector map as GRASS GIS specific archive file
v.unpack(1), v.unpack (1): Imports a GRASS GIS specific vector archive file (packed with v.pack) as a vector map
venti-client(3), vtconnect(3), vthello(3), vtread(3), vtwrite(3), vtreadpacket(3), vtwritepacket(3), vtsync(3), vtping(3), vtrpc(3), ventidoublechecksha1(3): Venti client
venti-fcall(3), VtEntry(3), VtFcall(3), VtRoot(3), vtentrypack(3), vtentryunpack(3), vtfcallclear(3), vtfcallfmt(3), vtfcallpack(3), vtfcallunpack(3), vtfromdisktype(3), vttodisktype(3), vtgetstring(3), vtputstring(3), vtrootpack(3), vtrootunpack(3), vtparsescore(3), vtscorefmt(3): venti data formats
venti-packet(3), Packet(3), packetalloc(3), packetappend(3), packetasize(3), packetcmp(3), packetconcat(3), packetconsume(3), packetcopy(3), packetdup(3), packetforeign(3), packetfragments(3), packetfree(3), packetheader(3), packetpeek(3), packetprefix(3), packetsha1(3), packetsize(3), packetsplit(3), packetstats(3), packettrailer(3), packettrim(3): zero-copy network buffers
votca-tools(7): The basic tools library of the VOTCA package
votca_compare(1): Part of the VOTCA package
votca_help2doc(1): Part of the VOTCA package
votca_property(1): Part of the VOTCA package
wavpack(1): encode audio files to wavpack
wsimport(1): Generates JAX-WS portable artifacts that can be packaged in a web application archive (WAR) file and provides an Ant task
wvgain(1): adds ReplayGain information to wavpack files
wvtag(1): metadata utility for wavpack files
wvunpack(1): decodes wavpack encoded files
xtp_autogen_mapping(1): Part of the VOTCA package
xtp_basisset(1): Part of the VOTCA package
xtp_map(1): Part of the VOTCA package
xtp_modify_jobfile(1): Part of the VOTCA package
xtp_parallel(1): Part of the VOTCA package
xtp_qmmm2qm(1): Part of the VOTCA package
xtp_run(1): Part of the VOTCA package
xtp_tools(1): Part of the VOTCA package
xtp_update_mapfile(1): Part of the VOTCA package
zmpkg.pl(8): ZoneMinder Package Control Script

home | help

Header And Logo

Peripheral Links

Site Navigation

FreeBSD Manual Pages

Header And Logo

Peripheral Links

Search

Site Navigation

FreeBSD Manual Pages