FreeBSD Manual Pages

home | help

VOP_PATHCONF(9): return POSIX pathconf information
acl(3): introduction to the POSIX.1e/NFSv4 ACL security API
aligned_alloc(3), alloca(3), calloc(3), free(3), malloc(3), posix_memalign(3), realloc(3), reallocf(3), valloc(3), mmap(3), munmap(3): memory management functions
alq(9), alq_open_flags(9), alq_open(9), alq_writen(9), alq_write(9), alq_flush(9), alq_close(9), alq_getn(9), alq_get(9), alq_post_flags(9), alq_post(9): Asynchronous Logging Queues
apropos(1), whatis(1): search manual page databases
archive_clear_error(3), archive_compression(3), archive_compression_name(3), archive_copy_error(3), archive_errno(3), archive_error_string(3), archive_file_count(3), archive_filter_code(3), archive_filter_count(3), archive_filter_name(3), archive_format(3), archive_format_name(3), archive_position(3), archive_set_error(3): libarchive utility functions
atf_add_test_case(3), atf_check(3), atf_check_equal(3), atf_check_not_equal(3), atf_config_get(3), atf_config_has(3), atf_expect_death(3), atf_expect_exit(3), atf_expect_fail(3), atf_expect_pass(3), atf_expect_signal(3), atf_expect_timeout(3), atf_fail(3), atf_get(3), atf_get_srcdir(3), atf_init_test_cases(3), atf_pass(3), atf_require_kmod(3), atf_require_prog(3), atf_set(3), atf_skip(3), atf_test_case(3): POSIX shell API to write ATF-based test programs
audit_submit(3): general purpose audit record submission
c89(1): POSIX.2 C language compiler
fdim(3), fdimf(3), fdiml(3): positive difference functions
fgetpos(3), fseek(3), fseeko(3), fsetpos(3), ftell(3), ftello(3), rewind(3): reposition a stream
g_post_event(9), g_waitfor_event(9), g_cancel_event(9): GEOM events management
ibv_bind_mw(3): post a request to bind a type 1 memory window to a memory region
ibv_post_recv(3): post a list of work requests (WRs) to a receive queue
ibv_post_send(3): post a list of work requests (WRs) to a send queue
ibv_post_srq_recv(3): post a list of work requests (WRs) to a shared receive queue (SRQ)
jemalloc(3): general purpose memory allocation functions
libthr(3): 1:1 POSIX threads library
lseek(2): reposition read/write file offset
madvise(2), posix_madvise(2): give advice about use of memory
malloc.conf(5), jemalloc(5): general purpose memory allocation functions
memguard(9), MemGuard(9): memory allocator for debugging purposes
mqueuefs(4): POSIX message queue file system
pmc_name_of_capability(3), pmc_name_of_class(3), pmc_name_of_cputype(3), pmc_name_of_disposition(3), pmc_name_of_event(3), pmc_name_of_mode(3), pmc_name_of_state(3): human readable names for numeric constants used by pmc(3) and hwpmc(4)
pos_form_cursor(3): position a form window cursor
pos_menu_cursor(3): position a menu's cursor
posix1e(3): introduction to the POSIX.1e security API
posix_fadvise(2): give advice about use of file data
posix_fallocate(2): pre-allocate storage for a range in a file
posix_openpt(2): open a pseudo-terminal device
posix_spawn(3), posix_spawnp(3): spawn a process
posix_spawn_file_actions_addopen(3), posix_spawn_file_actions_adddup2(3), posix_spawn_file_actions_addclose(3), posix_spawn_file_actions_addclosefrom_np(3), posix_spawn_file_actions_addchdir_np(3), posix_spawn_file_actions_addfchdir_np(3): add open, dup2, close, closefrom, or chdir/fchdir actions to spawn file actions object
posix_spawn_file_actions_init(3), posix_spawn_file_actions_destroy(3): initialize and destroy spawn file actions object
posix_spawnattr_getflags(3), posix_spawnattr_setflags(3): get and set the spawn-flags attribute of a spawn attributes object
posix_spawnattr_getpgroup(3), posix_spawnattr_setpgroup(3): get and set the spawn-pgroup attribute of a spawn attributes object
posix_spawnattr_getschedparam(3), posix_spawnattr_setschedparam(3): get and set the spawn-schedparam attribute of a spawn attributes object
posix_spawnattr_getschedpolicy(3), posix_spawnattr_setschedpolicy(3): get and set the spawn-schedpolicy attribute of a spawn attributes object
posix_spawnattr_getsigdefault(3), posix_spawnattr_setsigdefault(3): get and set the spawn-sigdefault attribute of a spawn attributes object
posix_spawnattr_getsigmask(3), posix_spawnattr_setsigmask(3): get and set the spawn-sigmask attribute of a spawn attributes object
posix_spawnattr_init(3), posix_spawnattr_destroy(3): initialize and destroy spawn attributes object
posixmqcontrol(1): Control POSIX mqueuefs message queues
posixshmcontrol(1): Control POSIX shared memory segments
post_form(3), unpost_form(3): write or erase forms from associated subwindows
post_menu(3), unpost_menu(3): write or erase menus from associated subwindows
pselect(2): synchronous I/O multiplexing a la POSIX.1g
psignal(9), kern_psignal(9), pgsignal(9), tdsignal(9): post signal to a thread, process, or process group
pthread(3): POSIX thread functions
pthread_np(3): FreeBSD extensions to POSIX thread functions
rdma_post_read(3): post an RDMA read work request
rdma_post_readv(3): post an RDMA read work request
rdma_post_recv(3): post a work request to receive an incoming message
rdma_post_recvv(3): post a work request to receive incoming messages
rdma_post_send(3): post a work request to send a message
rdma_post_sendv(3): post a work request to send a message
rdma_post_ud_send(3): post a work request to send a datagram
rdma_post_write(3): post an RDMA write work request
rdma_post_writev(3): post an RDMA write work request
re_format(7): POSIX 1003.2 regular expressions
sbuf(9), sbuf_new(9), sbuf_new_auto(9), sbuf_new_for_sysctl(9), sbuf_clear(9), sbuf_get_flags(9), sbuf_set_flags(9), sbuf_clear_flags(9), sbuf_setpos(9), sbuf_bcat(9), sbuf_bcopyin(9), sbuf_bcpy(9), sbuf_cat(9), sbuf_copyin(9), sbuf_cpy(9), sbuf_nl_terminate(9), sbuf_printf(9), sbuf_vprintf(9), sbuf_putc(9), sbuf_set_drain(9), sbuf_trim(9), sbuf_error(9), sbuf_finish(9), sbuf_data(9), sbuf_len(9), sbuf_done(9), sbuf_delete(9), sbuf_start_section(9), sbuf_end_section(9), sbuf_hexdump(9), sbuf_printf_drain(9), sbuf_putbuf(9): safe string composition
sem(4): POSIX semaphores
sem_post(3): increment (unlock) a semaphore
sema(9), sema_init(9), sema_destroy(9), sema_post(9), sema_wait(9), sema_timedwait(9), sema_trywait(9), sema_value(9): kernel counting semaphore
signal(9), SIGADDSET(9), SIGDELSET(9), SETEMPTYSET(9), SIGFILLSET(9), SIGISMEMBER(9), SIGISEMPTY(9), SIGNOTEMPTY(9), SIGSETEQ(9), SIGSETNEQ(9), SIGSETOR(9), SIGSETAND(9), SIGSETNAND(9), SIGSETCANTMASK(9), SIG_STOPSIGMASK(9), SIG_CONTSIGMASK(9), SIGPENDING(9), cursig(9), execsigs(9), issignal(9), killproc(9), pgsigio(9), postsig(9), sigexit(9), siginit(9), signotify(9), trapsignal(9): kernel signal functions
time2posix(3), posix2time(3): convert seconds since the Epoch
uma(9), UMA(9): general-purpose kernel object allocator
usbhid(3), hid_get_report_desc(3), hid_get_report_id(3), hid_use_report_desc(3), hid_dispose_report_desc(3), hid_start_parse(3), hid_end_parse(3), hid_get_item(3), hid_report_size(3), hid_locate(3), hid_usage_page(3), hid_usage_in_page(3), hid_init(3), hid_get_data(3), hid_set_data(3), hid_get_report(3), hid_set_report(3): USB HID access routines
vaccess_acl_posix1e(9): generate a POSIX.1e ACL access control decision using vnode parameters
vmem(9): general purpose resource allocator
wcswidth(3): number of column positions in wide-character string
wcwidth(3): number of column positions of a wide-character code
xdr(3), xdr_array(3), xdr_bool(3), xdr_bytes(3), xdr_char(3), xdr_destroy(3), xdr_double(3), xdr_enum(3), xdr_float(3), xdr_free(3), xdr_getpos(3), xdr_hyper(3), xdr_inline(3), xdr_int(3), xdr_long(3), xdr_longlong_t(3), xdrmem_create(3), xdr_opaque(3), xdr_pointer(3), xdrrec_create(3), xdrrec_endofrecord(3), xdrrec_eof(3), xdrrec_skiprecord(3), xdr_reference(3), xdr_setpos(3), xdr_short(3), xdr_sizeof(3), xdrstdio_create(3), xdr_string(3), xdr_u_char(3), xdr_u_hyper(3), xdr_u_int(3), xdr_u_long(3), xdr_u_longlong_t(3), xdr_u_short(3), xdr_union(3), xdr_vector(3), xdr_void(3), xdr_wrapstring(3): library routines for external data representation
OSSL_STORE_CTX(3), OSSL_STORE_post_process_info_fn(3), OSSL_STORE_open(3), OSSL_STORE_open_ex(3), OSSL_STORE_ctrl(3), OSSL_STORE_load(3), OSSL_STORE_eof(3), OSSL_STORE_delete(3), OSSL_STORE_error(3), OSSL_STORE_close(3): Types and functions to read objects from a URI
SSL_CTX_get0_param(3), SSL_get0_param(3), SSL_CTX_set1_param(3), SSL_set1_param(3), SSL_CTX_set_purpose(3), SSL_CTX_set_trust(3), SSL_set_purpose(3), SSL_set_trust(3): get and set verification parameters
SSL_CTX_set_read_ahead(3), SSL_CTX_get_read_ahead(3), SSL_set_read_ahead(3), SSL_get_read_ahead(3), SSL_CTX_get_default_read_ahead(3): manage whether to read as many input bytes as possible
SSL_get_ex_data_X509_STORE_CTX_idx(3), SSL_CTX_set_verify(3), SSL_set_verify(3), SSL_CTX_set_verify_depth(3), SSL_set_verify_depth(3), SSL_verify_cb(3), SSL_verify_client_post_handshake(3), SSL_set_post_handshake_auth(3), SSL_CTX_set_post_handshake_auth(3): set various SSL/TLS parameters for peer certificate verification
X509_STORE(3), X509_STORE_add_cert(3), X509_STORE_add_crl(3), X509_STORE_set_depth(3), X509_STORE_set_flags(3), X509_STORE_set_purpose(3), X509_STORE_set_trust(3), X509_STORE_add_lookup(3), X509_STORE_load_file_ex(3), X509_STORE_load_file(3), X509_STORE_load_path(3), X509_STORE_load_store_ex(3), X509_STORE_load_store(3), X509_STORE_set_default_paths_ex(3), X509_STORE_set_default_paths(3), X509_STORE_load_locations_ex(3), X509_STORE_load_locations(3): X509_STORE manipulation
X509_STORE_CTX_new_ex(3), X509_STORE_CTX_new(3), X509_STORE_CTX_cleanup(3), X509_STORE_CTX_free(3), X509_STORE_CTX_init(3), X509_STORE_CTX_init_rpk(3), X509_STORE_CTX_set0_trusted_stack(3), X509_STORE_CTX_set_cert(3), X509_STORE_CTX_set0_crls(3), X509_STORE_CTX_set0_rpk(3), X509_STORE_CTX_get0_param(3), X509_STORE_CTX_set0_param(3), X509_STORE_CTX_get0_untrusted(3), X509_STORE_CTX_set0_untrusted(3), X509_STORE_CTX_get_num_untrusted(3), X509_STORE_CTX_get0_chain(3), X509_STORE_CTX_set0_verified_chain(3), X509_STORE_CTX_get0_rpk(3), X509_STORE_CTX_set_default(3), X509_STORE_CTX_set_verify(3), X509_STORE_CTX_verify_fn(3), X509_STORE_CTX_set_purpose(3), X509_STORE_CTX_set_trust(3), X509_STORE_CTX_purpose_inherit(3): X509_STORE_CTX initialisation
X509_VERIFY_PARAM_set_flags(3), X509_VERIFY_PARAM_clear_flags(3), X509_VERIFY_PARAM_get_flags(3), X509_VERIFY_PARAM_set_purpose(3), X509_VERIFY_PARAM_get_purpose(3), X509_VERIFY_PARAM_get_inh_flags(3), X509_VERIFY_PARAM_set_inh_flags(3), X509_VERIFY_PARAM_set_trust(3), X509_VERIFY_PARAM_set_depth(3), X509_VERIFY_PARAM_get_depth(3), X509_VERIFY_PARAM_set_auth_level(3), X509_VERIFY_PARAM_get_auth_level(3), X509_VERIFY_PARAM_set_time(3), X509_VERIFY_PARAM_get_time(3), X509_VERIFY_PARAM_add0_policy(3), X509_VERIFY_PARAM_set1_policies(3), X509_VERIFY_PARAM_get0_host(3), X509_VERIFY_PARAM_set1_host(3), X509_VERIFY_PARAM_add1_host(3), X509_VERIFY_PARAM_set_hostflags(3), X509_VERIFY_PARAM_get_hostflags(3), X509_VERIFY_PARAM_get0_peername(3), X509_VERIFY_PARAM_get0_email(3), X509_VERIFY_PARAM_set1_email(3), X509_VERIFY_PARAM_set1_ip(3), X509_VERIFY_PARAM_get1_ip_asc(3), X509_VERIFY_PARAM_set1_ip_asc(3): X509 verification parameters
X509_check_purpose(3), X509_PURPOSE_get_count(3), X509_PURPOSE_get_unused_id(3), X509_PURPOSE_get_by_sname(3), X509_PURPOSE_get_by_id(3), X509_PURPOSE_add(3), X509_PURPOSE_cleanup(3), X509_PURPOSE_get0(3), X509_PURPOSE_get_id(3), X509_PURPOSE_get0_name(3), X509_PURPOSE_get0_sname(3), X509_PURPOSE_get_trust(3), X509_PURPOSE_set(3): functions related to checking the purpose of a certificate
"glRasterPos2d(3), glRasterPos2f(3), glRasterPos2i(3), glRasterPos2s(3), glRasterPos3d(3), glRasterPos3f(3), glRasterPos3i(3), glRasterPos3s(3), glRasterPos4d(3), glRasterPos4f(3), glRasterPos4i(3), glRasterPos4s(3), glRasterPos2dv(3), glRasterPos2fv(3), glRasterPos2iv(3), glRasterPos2sv(3), glRasterPos3dv(3), glRasterPos3fv(3), glRasterPos3iv(3), glRasterPos3sv(3), glRasterPos4dv(3), glRasterPos4fv(3), glRasterPos4iv(3), glRasterPos4sv(3): specify the raster position for pixel operations
AG_Fixed(3): agar fixed-position container widget
ALLEGRO_VIDEO_POSITION_TYPE(3): Allegro 5 API
BSpar_solve(3): General solver of a system of equations preconditioned by one of several preconditioners and using one of several possible methods. The rhs can be a block of vectors
BSpar_sym_solve(3): Solve a symmetric positive definite system of equations using conjugate gradients preconditioned by one of several preconditioners. The rhs can be a block of vectors. The user should not call this function directly, but BSpar_solve()
CDKparamNumber(3), CDKparamNumber CDKparamNumber2 CDKparamString CDKparamString2 CDKparseParams CDKparsePosition CDKparamValue cdk_params(3): Cdk command-line parsing
CURLINFO_POSTTRANSFER_TIME_T(3): get the time until the last byte is sent
CURLOPT_COPYPOSTFIELDS(3): have libcurl copy data to POST
CURLOPT_HTTPPOST(3): multipart formpost content
CURLOPT_MIMEPOST(3): send data from mime structure
CURLOPT_POST(3): make an HTTP POST
CURLOPT_POSTFIELDS(3): data to POST to server
CURLOPT_POSTFIELDSIZE(3): size of POST data pointed to
CURLOPT_POSTFIELDSIZE_LARGE(3): size of POST data pointed to
CURLOPT_POSTQUOTE(3): (S)FTP commands to run after the transfer
CURLOPT_POSTREDIR(3): how to act on an HTTP POST redirect
Compose(5): X client mappings for multi-key input sequences
Composite(3): The Composite widget class "Composite" "widget class" "Composite"
Diffing_with_keys(3o): When diffing lists where each element has a distinct key, we can refine the diffing patch by introducing two composite edit moves: swaps and moves
ExperimentFile(3), exp_read_info (3), exp_fread_info (3), exp_create_info (3), exp_destroy_info (3), exp_create_range (3), exp_extract_range (3), exp_get_feature_index (3), exp_get_int (3), exp_get_rng (3), exp_get_str (3), exp_put_int (3), exp_put_rng (3), exp_put_str (3), exp_print_line (3), exp_print_seq (3), exp_print_file (3), opos2str (3), str2opos (3), conf2str (3), str2conf(3): Manipulations of the Experiment File format "exp_read_info()" "" "exp_read_info()" "exp_fread_info()" "" "exp_fread_info()" "exp_create_info()" "" "exp_create_info()" "exp_destroy_info()" "" "exp_destroy_info()" "exp_create_range()" "" "exp_create_range()" "exp_extract_range()" "" "exp_extract_range()" "exp_get_feature_index()" "" "exp_get_feature_index()" "exp_get_int()" "" "exp_get_int()" "exp_get_rng()" "" "exp_get_rng()" "exp_get_str()" "" "exp_get_str()" "exp_put_int()" "" "exp_put_int()" "exp_put_rng()" "" "exp_put_rng()" "exp_put_str()" "" "exp_put_str()" "exp_print_line()" "" "exp_print_line()" "exp_print_seq()" "" "exp_print_seq()" "exp_print_file()" "" "exp_print_file()" "opos2str()" "" "opos2str()" "str2opos()" "" "str2opos()" "conf2str()" "" "conf2str()" "str2conf()" "" "str2conf()"
FontId.tk86(3), Tk_FontId(3), Tk_GetFontMetrics(3), Tk_PostscriptFontName(3): accessor functions for fonts
HPL_ladd(3): Adds two long positive integers
HPL_lmul(3): multiplies 2 long positive integers
Hyprland(1): Dynamic tiling Wayland compositor
IV_EVENT_INIT(3), iv_event_register(3), iv_event_unregister(3), iv_event_post(3): manage ivykis objects for event notification
IV_EVENT_RAW_INIT(3), iv_event_raw_register(3), iv_event_raw_unregister(3), iv_event_raw_post(3): manage ivykis objects for event notification
Location(3o): Source code locations (ranges of positions), used in parsetree
MOVE(7): position a cursor
MPI_File_get_byte_offset(3): Returns the absolute byte position in the file corresponding to "offset" etypes relative to the current view
MPI_File_get_position(3): Returns the current position of the individual file pointer in etype units relative to the current view
MPI_File_get_position_shared(3): Returns the current position of the shared file pointer in etype units relative to the current view
MPI_Win_post(3): Start an RMA exposure epoch
MPI_Win_test(3): Test whether an RMA exposure epoch has completed
MPI_Win_wait(3): Completes an RMA exposure epoch begun with MPI_Win_post
MailScanner(8): Virus/Spam Scanner for Sendmail, Exim and Postfix
Munin::Master::GroupRepository(3): FIX
Munin::Plugin::Pgsql(3): Base module for PostgreSQL plugins for Munin
OSSL_STORE_CTX(3), OSSL_STORE_post_process_info_fn(3), OSSL_STORE_open(3), OSSL_STORE_ctrl(3), OSSL_STORE_load(3), OSSL_STORE_eof(3), OSSL_STORE_error(3), OSSL_STORE_close(3): Types and functions to read objects from a URI
OSSL_STORE_CTX(3ossl), OSSL_STORE_post_process_info_fn(3ossl), OSSL_STORE_open(3ossl), OSSL_STORE_open_ex(3ossl), OSSL_STORE_ctrl(3ossl), OSSL_STORE_load(3ossl), OSSL_STORE_eof(3ossl), OSSL_STORE_delete(3ossl), OSSL_STORE_error(3ossl), OSSL_STORE_close(3ossl): Types and functions to read objects from a URI
PS_close(3): Closes a PostScript document
PS_delete(3): Deletes all resources of a PostScript document
PS_get_majorversion(3): returns the major version number of the PostScript library
PS_get_minorversion(3): returns the minor version number of the PostScript library
PS_get_subminorversion(3): returns the subminor version number of the PostScript library
PS_include_file(3): Include external PostScript file
PS_new(3): Creating a new PostScript document object
PS_new2(3): Creates a new PostScript document object
PS_open_mem(3): Creates a PostScript document in memory
PS_set_text_pos(3): Sets position for text output
PS_show(3): Output text at current position
PS_show_xy(3): Output text at given position
PS_show_xy2(3): Output text at given position
PS_symbol(3): Output glyph at a certain position in the font encoding vector
Pnews(1): a program for posting news articles
SDL_ExposeEvent(3): Quit requested event
SDL_JoyHatEvent(3): Joystick hat position change event structure
SDL_SemPost(3): Unlock a semaphore
SDL_SetEventFilter(3): Sets up a filter to process all events before they are posted to the event queue
SDL_WarpMouse(3): Set the position of the mouse cursor
SSL_CTX_get0_param(3ossl), SSL_get0_param(3ossl), SSL_CTX_set1_param(3ossl), SSL_set1_param(3ossl), SSL_CTX_set_purpose(3ossl), SSL_CTX_set_trust(3ossl), SSL_set_purpose(3ossl), SSL_set_trust(3ossl): get and set verification parameters
SSL_CTX_set_read_ahead(3), SSL_CTX_get_read_ahead(3), SSL_set_read_ahead(3), SSL_get_read_ahead(3), SSL_CTX_get_default_read_ahead(3): manage whether to read as many input bytes as possible
SSL_CTX_set_read_ahead(3ossl), SSL_CTX_get_read_ahead(3ossl), SSL_set_read_ahead(3ossl), SSL_get_read_ahead(3ossl), SSL_CTX_get_default_read_ahead(3ossl): manage whether to read as many input bytes as possible
SSL_QUIC_METHOD(3ossl), OSSL_ENCRYPTION_LEVEL(3ossl), SSL_CTX_set_quic_method(3ossl), SSL_set_quic_method(3ossl), SSL_set_quic_transport_params(3ossl), SSL_get_peer_quic_transport_params(3ossl), SSL_quic_max_handshake_flight_len(3ossl), SSL_quic_read_level(3ossl), SSL_quic_write_level(3ossl), SSL_provide_quic_data(3ossl), SSL_process_quic_post_handshake(3ossl), SSL_is_quic(3ossl), SSL_get_peer_quic_transport_version(3ossl), SSL_get_quic_transport_version(3ossl), SSL_set_quic_transport_version(3ossl), SSL_set_quic_use_legacy_codepoint(3ossl), SSL_set_quic_early_data_enabled(3ossl): QUIC support
SSL_get_ex_data_X509_STORE_CTX_idx(3), SSL_CTX_set_verify(3), SSL_set_verify(3), SSL_CTX_set_verify_depth(3), SSL_set_verify_depth(3), SSL_verify_cb(3), SSL_verify_client_post_handshake(3), SSL_set_post_handshake_auth(3), SSL_CTX_set_post_handshake_auth(3): set peer certificate verification parameters
SSL_get_ex_data_X509_STORE_CTX_idx(3ossl), SSL_CTX_set_verify(3ossl), SSL_set_verify(3ossl), SSL_CTX_set_verify_depth(3ossl), SSL_set_verify_depth(3ossl), SSL_verify_cb(3ossl), SSL_verify_client_post_handshake(3ossl), SSL_set_post_handshake_auth(3ossl), SSL_CTX_set_post_handshake_auth(3ossl): set various SSL/TLS parameters for peer certificate verification
Sympa::DatabaseDriver::PostgreSQL(3Sympa): Database driver for PostgreSQL
Sympa::WWW::SharedDocument(3Sympa): Shared document repository and its nodes
Tcl_AddErrorInfo.tcl86(3), Tcl_GetReturnOptions(3), Tcl_SetReturnOptions(3), Tcl_AddErrorInfo(3), Tcl_AppendObjToErrorInfo(3), Tcl_AddObjErrorInfo(3), Tcl_SetObjErrorCode(3), Tcl_SetErrorCode(3), Tcl_SetErrorCodeVA(3), Tcl_SetErrorLine(3), Tcl_GetErrorLine(3), Tcl_PosixError(3), Tcl_LogCommandInfo(3): retrieve or record information about errors and other return options
Tcl_AddErrorInfo.tcl90(3), Tcl_GetReturnOptions(3), Tcl_SetReturnOptions(3), Tcl_AddErrorInfo(3), Tcl_AppendObjToErrorInfo(3), Tcl_AddObjErrorInfo(3), Tcl_SetObjErrorCode(3), Tcl_SetErrorCode(3), Tcl_SetErrorLine(3), Tcl_GetErrorLine(3), Tcl_PosixError(3), Tcl_LogCommandInfo(3): retrieve or record information about errors and other return options
Tcl_CreateAlias.tcl86(3), Tcl_IsSafe(3), Tcl_MakeSafe(3), Tcl_CreateChild(3), Tcl_CreateSlave(3), Tcl_GetChild(3), Tcl_GetSlave(3), Tcl_GetParent(3), Tcl_GetMaster(3), Tcl_GetInterpPath(3), Tcl_CreateAlias(3), Tcl_CreateAliasObj(3), Tcl_GetAlias(3), Tcl_GetAliasObj(3), Tcl_ExposeCommand(3), Tcl_HideCommand(3): manage multiple Tcl interpreters, aliases and hidden commands
Tcl_CreateAlias.tcl90(3), Tcl_IsSafe(3), Tcl_CreateChild(3), Tcl_GetChild(3), Tcl_GetParent(3), Tcl_GetInterpPath(3), Tcl_CreateAlias(3), Tcl_CreateAliasObj(3), Tcl_GetAliasObj(3), Tcl_ExposeCommand(3), Tcl_HideCommand(3): manage multiple Tcl interpreters, aliases and hidden commands
Thread(3o): Lightweight threads for Posix 1003.1c and Win32
Tk_CanvasPsBitmap.tk86(3), Tk_CanvasPsY(3), Tk_CanvasPsBitmap(3), Tk_CanvasPsColor(3), Tk_CanvasPsFont(3), Tk_CanvasPsPath(3), Tk_CanvasPsStipple(3): utility procedures for generating Postscript for canvases
Tk_CharBbox.tk86(3), Tk_ComputeTextLayout(3), Tk_FreeTextLayout(3), Tk_DrawTextLayout(3), Tk_UnderlineTextLayout(3), Tk_PointToChar(3), Tk_CharBbox(3), Tk_DistanceToTextLayout(3), Tk_IntersectTextLayout(3), Tk_TextLayoutToPostscript(3): routines to measure and display single-font, multi-line, justified text
Tk_GetAnchor.tk86(3), Tk_GetAnchorFromObj(3), Tk_GetAnchor(3), Tk_NameOfAnchor(3): translate between strings and anchor positions
Tk_MoveToplevelWindow.tk86(3), Tk_MoveToplevelWindow(3): Adjust the position of a top-level window
Tk_RestackWindow.tk86(3), Tk_RestackWindow(3): Change a window's position in the stacking order
Tk_SetCaretPos.tk86(3), Tk_SetCaretPos(3): set the display caret location
Tspi_PcrComposite_GetPcrValue(3): get the digest value of a given PCR index inside a PCR composite object
Tspi_PcrComposite_SelectPcrIndex(3), Tspi_PcrComposite_SelectPcrIndex-(3): select a PCR index inside a PCR composite object
Tspi_PcrComposite_SetPcrValue(3), Tspi_PcrComposite_SetPcrValue-(3): set the digest for a given PCR index inside a PCR composite object
WildMidi_FastSeek(3): Move to a position in a midi file
X509_PURPOSE_set(3), X509_PURPOSE_get_by_id(3), X509_PURPOSE_add(3), X509_PURPOSE_get_count(3), X509_PURPOSE_cleanup(3), X509_PURPOSE_get0(3), X509_PURPOSE_get_by_sname(3), X509_PURPOSE_get_id(3), X509_PURPOSE_get0_name(3), X509_PURPOSE_get0_sname(3), X509_PURPOSE_get_trust(3): purpose objects, indices, and identifiers
X509_STORE(3), X509_STORE_add_cert(3), X509_STORE_add_crl(3), X509_STORE_set_depth(3), X509_STORE_set_flags(3), X509_STORE_set_purpose(3), X509_STORE_set_trust(3), X509_STORE_add_lookup(3), X509_STORE_load_locations(3), X509_STORE_set_default_paths(3): X509_STORE manipulation
X509_STORE(3ossl), X509_STORE_add_cert(3ossl), X509_STORE_add_crl(3ossl), X509_STORE_set_depth(3ossl), X509_STORE_set_flags(3ossl), X509_STORE_set_purpose(3ossl), X509_STORE_set_trust(3ossl), X509_STORE_add_lookup(3ossl), X509_STORE_load_file_ex(3ossl), X509_STORE_load_file(3ossl), X509_STORE_load_path(3ossl), X509_STORE_load_store_ex(3ossl), X509_STORE_load_store(3ossl), X509_STORE_set_default_paths_ex(3ossl), X509_STORE_set_default_paths(3ossl), X509_STORE_load_locations_ex(3ossl), X509_STORE_load_locations(3ossl): X509_STORE manipulation
X509_STORE_CTX_new(3), X509_STORE_CTX_cleanup(3), X509_STORE_CTX_free(3), X509_STORE_CTX_init(3), X509_STORE_CTX_set0_trusted_stack(3), X509_STORE_CTX_set_cert(3), X509_STORE_CTX_set0_crls(3), X509_STORE_CTX_get0_chain(3), X509_STORE_CTX_set0_verified_chain(3), X509_STORE_CTX_get0_param(3), X509_STORE_CTX_set0_param(3), X509_STORE_CTX_get0_untrusted(3), X509_STORE_CTX_set0_untrusted(3), X509_STORE_CTX_get_num_untrusted(3), X509_STORE_CTX_set_default(3), X509_STORE_CTX_set_verify(3), X509_STORE_CTX_verify_fn(3), X509_STORE_CTX_set_purpose(3), X509_STORE_CTX_set_trust(3), X509_STORE_CTX_purpose_inherit(3): X509_STORE_CTX initialisation
X509_STORE_CTX_new_ex(3ossl), X509_STORE_CTX_new(3ossl), X509_STORE_CTX_cleanup(3ossl), X509_STORE_CTX_free(3ossl), X509_STORE_CTX_init(3ossl), X509_STORE_CTX_init_rpk(3ossl), X509_STORE_CTX_set0_trusted_stack(3ossl), X509_STORE_CTX_set_cert(3ossl), X509_STORE_CTX_set0_crls(3ossl), X509_STORE_CTX_set0_rpk(3ossl), X509_STORE_CTX_get0_param(3ossl), X509_STORE_CTX_set0_param(3ossl), X509_STORE_CTX_get0_untrusted(3ossl), X509_STORE_CTX_set0_untrusted(3ossl), X509_STORE_CTX_get_num_untrusted(3ossl), X509_STORE_CTX_get0_chain(3ossl), X509_STORE_CTX_set0_verified_chain(3ossl), X509_STORE_CTX_get0_rpk(3ossl), X509_STORE_CTX_set_default(3ossl), X509_STORE_CTX_set_verify(3ossl), X509_STORE_CTX_verify_fn(3ossl), X509_STORE_CTX_set_ocsp_resp(3ossl), X509_STORE_CTX_set_purpose(3ossl), X509_STORE_CTX_set_trust(3ossl), X509_STORE_CTX_purpose_inherit(3ossl): X509_STORE_CTX initialisation
X509_STORE_CTX_set_flags(3), X509_STORE_CTX_set_time(3), X509_STORE_CTX_set_depth(3), X509_STORE_CTX_set_trust(3), X509_STORE_CTX_set_purpose(3), X509_STORE_CTX_get0_param(3), X509_STORE_CTX_set0_param(3), X509_STORE_CTX_set_default(3): X509_STORE_CTX parameter initialisation
X509_VERIFY_PARAM_set_flags(3), X509_VERIFY_PARAM_clear_flags(3), X509_VERIFY_PARAM_get_flags(3), X509_VERIFY_PARAM_set_purpose(3), X509_VERIFY_PARAM_get_inh_flags(3), X509_VERIFY_PARAM_set_inh_flags(3), X509_VERIFY_PARAM_set_trust(3), X509_VERIFY_PARAM_set_depth(3), X509_VERIFY_PARAM_get_depth(3), X509_VERIFY_PARAM_set_auth_level(3), X509_VERIFY_PARAM_get_auth_level(3), X509_VERIFY_PARAM_set_time(3), X509_VERIFY_PARAM_get_time(3), X509_VERIFY_PARAM_add0_policy(3), X509_VERIFY_PARAM_set1_policies(3), X509_VERIFY_PARAM_set1_host(3), X509_VERIFY_PARAM_add1_host(3), X509_VERIFY_PARAM_set_hostflags(3), X509_VERIFY_PARAM_get_hostflags(3), X509_VERIFY_PARAM_get0_peername(3), X509_VERIFY_PARAM_set1_email(3), X509_VERIFY_PARAM_set1_ip(3), X509_VERIFY_PARAM_set1_ip_asc(3): X509 verification parameters
X509_VERIFY_PARAM_set_flags(3ossl), X509_VERIFY_PARAM_clear_flags(3ossl), X509_VERIFY_PARAM_get_flags(3ossl), X509_VERIFY_PARAM_set_purpose(3ossl), X509_VERIFY_PARAM_get_purpose(3ossl), X509_VERIFY_PARAM_get_inh_flags(3ossl), X509_VERIFY_PARAM_set_inh_flags(3ossl), X509_VERIFY_PARAM_set_trust(3ossl), X509_VERIFY_PARAM_set_depth(3ossl), X509_VERIFY_PARAM_get_depth(3ossl), X509_VERIFY_PARAM_set_auth_level(3ossl), X509_VERIFY_PARAM_get_auth_level(3ossl), X509_VERIFY_PARAM_set_time(3ossl), X509_VERIFY_PARAM_get_time(3ossl), X509_VERIFY_PARAM_add0_policy(3ossl), X509_VERIFY_PARAM_set1_policies(3ossl), X509_VERIFY_PARAM_get0_host(3ossl), X509_VERIFY_PARAM_set1_host(3ossl), X509_VERIFY_PARAM_add1_host(3ossl), X509_VERIFY_PARAM_set_hostflags(3ossl), X509_VERIFY_PARAM_get_hostflags(3ossl), X509_VERIFY_PARAM_get0_peername(3ossl), X509_VERIFY_PARAM_get0_email(3ossl), X509_VERIFY_PARAM_set1_email(3ossl), X509_VERIFY_PARAM_set1_ip(3ossl), X509_VERIFY_PARAM_get1_ip_asc(3ossl), X509_VERIFY_PARAM_set1_ip_asc(3ossl): X509 verification parameters
X509_add1_trust_object(3), X509_trust_clear(3), X509_add1_reject_object(3), X509_reject_clear(3): mark an X.509 certificate as intended for a specific purpose
X509_check_purpose(3): Check the purpose of a certificate
X509_check_purpose(3ossl), X509_PURPOSE_get_count(3ossl), X509_PURPOSE_get_unused_id(3ossl), X509_PURPOSE_get_by_sname(3ossl), X509_PURPOSE_get_by_id(3ossl), X509_PURPOSE_add(3ossl), X509_PURPOSE_cleanup(3ossl), X509_PURPOSE_get0(3ossl), X509_PURPOSE_get_id(3ossl), X509_PURPOSE_get0_name(3ossl), X509_PURPOSE_get0_sname(3ossl), X509_PURPOSE_get_trust(3ossl), X509_PURPOSE_set(3ossl): functions related to checking the purpose of a certificate
XExposeEvent(3): Expose event structure
XGraphicsExposeEvent(3), XNoExposeEvent(3): GraphicsExpose and NoExpose event structures
XSetArcMode(3), XSetSubwindowMode(3), XSetGraphicsExposure(3): GC convenience routines
Xau library: XauFileName(3), XauReadAuth(3), XauLockAuth(3), XauUnlockAuth(3), XauWriteAuth(3), XauDisposeAuth(3), XauGetAuthByAddr(3), XauGetBestAuthByAddr(3): X authority database routines
Xcomposite(3): X Composite Extension library
XmAddToPostFromList(3): a RowColumn function that makes a menu accessible from more than one widget "XmAddToPostFromList" "RowColumn functions" "XmAddToPostFromList"
XmComboBoxDeletePos(3): Delete a XmComboBox item
XmDataFieldGetSelectionPosition(3): A DataField function that accesses the position of the primary selection "XmDataFieldGetSelection%Position" "DataField functions" "XmDataFieldGetSelection%Position"
XmDataFieldSetInsertionPosition(3): A DataField function that sets the position of the insertion cursor "XmDataFieldSetInsertion%Position" "DataField functions" "XmDataFieldSetInsertion%Position"
XmDataFieldXYToPos(3): A DataField function that accesses the character position nearest an x and y position "XmDataFieldXYToPos" "DataField functions" "XmDataFieldXYToPos"
XmGetPostedFromWidget(3): A RowColumn function that returns the widget from which a menu was posted "XmGetPostedFromWidget" "RowColumn functions" "XmGetPostedFromWidget"
XmHierarchyGetChildNodes(3): A List function that returns all instances of an item in the list "XmListGetMatchPos" "List functions" "XmListGetMatchPos"
XmImMbLookupString(3): An input manager function that retrieves a composed string from an input method "XmImMbLookupString" "input manager functions" "XmImMbLookupString"
XmListDeleteItemsPos(3): A List function that deletes items from the list starting at the given position "XmListDeleteItemsPos" "List functions" "XmListDeleteItemsPos"
XmListDeletePos(3): A List function that deletes an item from a list at a specified position "XmListDeletePos" "List functions" "XmListDeletePos"
XmListDeletePositions(3): A List function that deletes items from a list based on an array of positions "XmListDeletePositions" "List functions" "XmListDeletePositions"
XmListDeselectPos(3): A List function that deselects an item at a specified position in the list "XmListDeselectPos" "List functions" "XmListDeselectPos"
XmListGetKbdItemPos(3): A List function that returns the position of the item at the location cursor "XmListGetKbdItemPos" "List functions" "XmListGetKbdItemPos"
XmListGetMatchPos(3): A List function that returns all instances of an item in the list "XmListGetMatchPos" "List functions" "XmListGetMatchPos"
XmListGetSelectedPos(3): A List function that returns the position of every selected item in the list "XmListGetSelectedPos" "List functions" "XmListGetSelectedPos"
XmListItemPos(3): A List function that returns the position of an item in the list "XmListItemPos" "List functions" "XmListItemPos"
XmListPosSelected(3): A List function that determines if the list item at a specified position is selected "XmListPosSelected" "List functions" "XmListPosSelected"
XmListPosToBounds(3): A List function that returns the bounding box of an item at a specified position in a list "XmListPosToBounds" "List functions" "XmListPosToBounds"
XmListReplaceItemsPos(3): A List function that replaces the specified elements in the list "XmListReplaceItemsPos" "List functions" "XmListReplaceItemsPos"
XmListReplaceItemsPosUnselected(3): A List function that replaces items in a list without selecting the replacement items "XmListReplaceItemsPosUn%selected" "List functions" "XmListReplaceItemsPosUn%selected"
XmListReplacePositions(3): A List function that replaces items in a list based on position "XmListReplacePositions" "List functions" "XmListReplacePositions"
XmListSelectPos(3): A List function that selects an item at a specified position in the list "XmListSelectPos" "List functions" "XmListSelectPos"
XmListSetBottomPos(3): A List function that makes a specified item the last visible item in the list "XmListSetBottomPos" "List functions" "XmListSetBottomPos"
XmListSetHorizPos(3): A List function that scrolls to the specified position in the list "XmListSetHorizPos" "List functions" "XmListSetHorizPos"
XmListSetKbdItemPos(3): A List function that sets the location cursor at a specified position "XmListSetKbdItemPos" "List functions" "XmListSetKbdItemPos"
XmListSetPos(3): A List function that makes the item at the given position the first visible position in the list "XmListSetPos" "List functions" "XmListSetPos"
XmListYToPos(3): A List function that returns the position of the item at a specified y-coordinate "XmListYToPos" "List functions" "XmListYToPos"
XmMenuPosition(3): A RowColumn function that positions a Popup menu pane "XmMenuPosition" "RowColumn functions" "XmMenuPosition"
XmRedisplayWidget(3): Synchronously activates the expose method of a widget to draw its content
XmRemoveFromPostFromList(3): a RowColumn function that disables a menu for a particular widget "XmRemoveFromPostFromList" "RowColumn functions" "XmRemoveFromPostFromList"
XmScaleGetValue(3): A Scale function that returns the current slider position "XmScaleGetValue" "Scale functions" "XmScaleGetValue"
XmScrollBarSetValues(3): A ScrollBar function that changes ScrollBar's increment values and the slider's size and position "XmScrollBarSetValues" "ScrollBar functions" "XmScrollBarSetValues"
XmSetProtocolHooks(3): A VendorShell function that allows preactions and postactions to be executed when a protocol message is received from MWM "XmSetProtocolHooks" "VendorShell functions" "XmSetProtocolHooks" "protocols"
XmSetWMProtocolHooks(3): A VendorShell convenience interface that allows preactions and postactions to be executed when a protocol message is received from the window manager "XmSetWMProtocolHooks" "VendorShell functions" "XmSetWMProtocolHooks" "protocols"
XmSimpleSpinBoxDeletePos(3): delete a XmSimpleSpinBox item
XmSpinBoxValidatePosition(3): translate the current value of the specified XmSpinBox child into a valid position
XmStringTableProposeTablist(3): A convenience function that returns a tab list "XmStringTableProposeTablist"
XmTabListReplacePositions(3): A convenience function that creates a new tab list with replacement tabs "XmTabListReplacePositions"
XmTextFieldGetBaseline(3): A TextField function that accesses the y position of the baseline "XmTextFieldGetBaseline" "TextField functions" "XmTextFieldGetBaseline"
XmTextFieldGetInsertionPosition(3): A TextField function that accesses the position of the insertion cursor "XmTextFieldGetInsertion%Position" "TextField functions" "XmTextFieldGetInsertion%Position"
XmTextFieldGetLastPosition(3): A TextField function that accesses the position of the last text character "XmTextFieldGetLastPosition" "TextField functions" "XmTextFieldGetLastPosition"
XmTextFieldGetSelectionPosition(3): A TextField function that accesses the position of the primary selection "XmTextFieldGetSelection%Position" "TextField functions" "XmTextFieldGetSelection%Position"
XmTextFieldPosToXY(3): A TextField function that accesses the x and y position of a character position "XmTextFieldPosToXY" "TextField functions" "XmTextFieldPosToXY"
XmTextFieldSetInsertionPosition(3): A TextField function that sets the position of the insertion cursor "XmTextFieldSetInsertion%Position" "TextField functions" "XmTextFieldSetInsertion%Position"
XmTextFieldShowPosition(3): A TextField function that forces text at a given position to be displayed "XmTextFieldShowPosition" "TextField functions" "XmTextFieldShowPosition"
XmTextFieldXYToPos(3): A TextField function that accesses the character position nearest an x and y position "XmTextFieldXYToPos" "TextField functions" "XmTextFieldXYToPos"
XmTextFindString(3): A Text function that finds the beginning position of a text string "XmTextFindString" "Text functions" "XmTextFindString"
XmTextFindStringWcs(3): A Text function that finds the beginning position of a wide character text string "XmTextFindStringWcs" "Text functions" "XmTextFindStringWcs"
XmTextGetBaseline(3): A Text function that accesses the y position of the baseline "XmTextGetBaseline" "Text functions" "XmTextGetBaseline"
XmTextGetInsertionPosition(3): A Text function that accesses the position of the insert cursor "XmTextGetInsertionPosition" "Text functions" "XmTextGetInsertionPosition"
XmTextGetLastPosition(3): A Text function that accesses the last position in the text "XmTextGetLastPosition" "Text functions" "XmTextGetLastPosition"
XmTextGetSelectionPosition(3): A Text function that accesses the position of the primary selection "XmTextGetSelectionPosition" "Text functions" "XmTextGetSelectionPosition"
XmTextGetTopCharacter(3): A Text function that accesses the position of the first character displayed "XmTextGetTopCharacter" "Text functions" "XmTextGetTopCharacter"
XmTextPosToXY(3): A Text function that accesses the x and y position of a character position "XmTextPosToXY" "Text functions" "XmTextPosToXY"
XmTextPosition(3): Data type for a character position within a text string "XmTextPosition" "data types" "XmTextPosition"
XmTextSetInsertionPosition(3): A Text function that sets the position of the insert cursor "XmTextSetInsertionPosition" "Text functions" "XmTextSetInsertionPosition"
XmTextSetTopCharacter(3): A Text function that sets the position of the first character displayed "XmTextSetTopCharacter" "Text functions" "XmTextSetTopCharacter"
XmTextShowPosition(3): A Text function that forces text at a given position to be displayed "XmTextShowPosition" "Text functions" "XmTextShowPosition"
XmTextXYToPos(3): A Text function that accesses the character position nearest an x and y position "XmTextXYToPos" "Text functions" "XmTextXYToPos"
XmUpdateDisplay(3): A function that processes all pending exposure events immediately "XmUpdateDisplay"
XmbLookupString(3), XwcLookupString(3), Xutf8LookupString(3): obtain composed input from an input method
XmtDialogPosition(3), XmtDialogPosition()(3): center a dialog box over a widget
XmtLayout(3): a general-purpose manager widget
XtAddExposureToRegion(3): merge exposure events into a region
XtClass(3), XtSuperclass(3), XtIsSubclass(3), XtCheckSubclass(3), XtIsObject(3), XtIsRectObj(3), XtIsWidget(3), XtIsComposite(3), XtIsConstraint(3), XtIsShell(3), XtIsOverrideShell(3), XtIsWMShell(3), XtIsVendorShell(3), XtIsTransientShell(3), XtIsTopLevelShell(3), XtIsApplicationShell(3), XtIsSessionShell(3): obtain and verify a widget's class
a2ps(1): format files for printing on a PostScript printer
aa_getmouse(3): Get mouse position as specified by last mouse event read by aa_getevent
aa_gotoxy(3): move the hardware cursor (if any) to specified position
access(5): Postfix SMTP server access table
activateCDKAlphalist(3), activateCDKAlphalist destroyCDKAlphalist drawCDKAlphalist eraseCDKAlphalist getCDKAlphalistBox getCDKAlphalistContents getCDKAlphalistCurrentItem getCDKAlphalistFillerChar getCDKAlphalistHighlight injectCDKAlphalist moveCDKAlphalist newCDKAlphalist positionCDKAlphalist setCDKAlphalist setCDKAlphalistBackgroundAttrib setCDKAlphalistBackgroundColor setCDKAlphalistBox setCDKAlphalistBoxAttribute setCDKAlphalistContents setCDKAlphalistCurrentItem setCDKAlphalistFillerChar setCDKAlphalistHighlight setCDKAlphalistHorizontalChar setCDKAlphalistLLChar setCDKAlphalistLRChar setCDKAlphalistPostProcess setCDKAlphalistPreProcess setCDKAlphalistULChar setCDKAlphalistURChar setCDKAlphalistVerticalChar cdk_alphalist(3): Cdk sorted list widget
activateCDKButton(3), activateCDKButton destroyCDKButton drawCDKButton eraseCDKButton getCDKButtonBox getCDKButtonMessage injectCDKButton moveCDKButton newCDKButton positionCDKButton setCDKButton setCDKButtonBackgroundAttrib setCDKButtonBackgroundColor setCDKButtonBox setCDKButtonBoxAttribute setCDKButtonHorizontalChar setCDKButtonLLChar setCDKButtonLRChar setCDKButtonMessage setCDKButtonULChar setCDKButtonURChar setCDKButtonVerticalChar cdk_button(3): create and manage a Cdk button widget
activateCDKButtonbox(3), activateCDKButtonbox destroyCDKButtonbox drawCDKButtonbox drawCDKButtonboxButtons eraseCDKButtonbox getCDKButtonboxBox getCDKButtonboxButtonCount getCDKButtonboxCurrentButton getCDKButtonboxHighlight injectCDKButtonbox moveCDKButtonbox newCDKButtonbox positionCDKButtonbox setCDKButtonbox setCDKButtonboxBackgroundAttrib setCDKButtonboxBackgroundColor setCDKButtonboxBox setCDKButtonboxBoxAttribute setCDKButtonboxCurrentButton setCDKButtonboxHighlight setCDKButtonboxHorizontalChar setCDKButtonboxLLChar setCDKButtonboxLRChar setCDKButtonboxPostProcess setCDKButtonboxPreProcess setCDKButtonboxULChar setCDKButtonboxURChar setCDKButtonboxVerticalChar cdk_buttonbox(3): Cdk buttonbox widget
activateCDKCalendar(3), activateCDKCalendar destroyCDKCalendar drawCDKCalendar eraseCDKCalendar getCDKCalendarBox getCDKCalendarDate getCDKCalendarDayAttribute getCDKCalendarHighlight getCDKCalendarMarker getCDKCalendarMonthAttribute getCDKCalendarYearAttribute injectCDKCalendar moveCDKCalendar newCDKCalendar positionCDKCalendar removeCDKCalendarMarker setCDKCalendar setCDKCalendarBackgroundAttrib setCDKCalendarBackgroundColor setCDKCalendarBox setCDKCalendarBoxAttribute setCDKCalendarDate setCDKCalendarDayAttribute setCDKCalendarDaysNames setCDKCalendarHighlight setCDKCalendarHorizontalChar setCDKCalendarLLChar setCDKCalendarLRChar setCDKCalendarMarker setCDKCalendarMonthAttribute setCDKCalendarMonthsNames setCDKCalendarPostProcess setCDKCalendarPreProcess setCDKCalendarULChar setCDKCalendarURChar setCDKCalendarVerticalChar setCDKCalendarYearAttribute cdk_calendar(3): Cdk calendar widget
activateCDKDScale(3), activateCDKDScale destroyCDKDScale drawCDKDScale eraseCDKDScale getCDKDScaleBox getCDKDScaleDigits getCDKDScaleHighValue getCDKDScaleLowValue getCDKDScaleValue injectCDKDScale moveCDKDScale newCDKDScale positionCDKDScale setCDKDScale setCDKDScaleBackgroundAttrib setCDKDScaleBackgroundColor setCDKDScaleBox setCDKDScaleBoxAttribute setCDKDScaleDigits setCDKDScaleHorizontalChar setCDKDScaleLLChar setCDKDScaleLRChar setCDKDScaleLowHigh setCDKDScalePostProcess setCDKDScalePreProcess setCDKDScaleULChar setCDKDScaleURChar setCDKDScaleValue setCDKDScaleVerticalChar cdk_dscale(3): Cdk scale widget (type double)
activateCDKDialog(3), activateCDKDialog destroyCDKDialog drawCDKDialog drawCDKDialogButtons eraseCDKDialog getCDKDialog getCDKDialogBox getCDKDialogHighlight getCDKDialogSeparator injectCDKDialog moveCDKDialog newCDKDialog positionCDKDialog setCDKDialog setCDKDialogBackgroundAttrib setCDKDialogBackgroundColor setCDKDialogBox setCDKDialogBox setCDKDialogBoxAttribute setCDKDialogHighlight setCDKDialogHorizontalChar setCDKDialogLLChar setCDKDialogLRChar setCDKDialogPostProcess setCDKDialogPreProcess setCDKDialogSeparator setCDKDialogULChar setCDKDialogURChar setCDKDialogVerticalChar cdk_dialog(3): Cdk dialog widget
activateCDKEntry(3), activateCDKEntry cleanCDKEntry destroyCDKEntry drawCDKEntry eraseCDKEntry getCDKEntryBox getCDKEntryFillerChar getCDKEntryHiddenChar getCDKEntryMax getCDKEntryMin getCDKEntryValue injectCDKEntry moveCDKEntry newCDKEntry positionCDKEntry setCDKEntry setCDKEntryBackgroundAttrib setCDKEntryBackgroundColor setCDKEntryBox setCDKEntryBoxAttribute setCDKEntryCB setCDKEntryFillerChar setCDKEntryHiddenChar setCDKEntryHighlight setCDKEntryHorizontalChar setCDKEntryLLChar setCDKEntryLRChar setCDKEntryMax setCDKEntryMin setCDKEntryPostProcess setCDKEntryPreProcess setCDKEntryULChar setCDKEntryURChar setCDKEntryValue setCDKEntryVerticalChar cdk_entry(3): Cdk text-entry widget
activateCDKFScale(3), activateCDKFScale destroyCDKFScale drawCDKFScale eraseCDKFScale getCDKFScaleBox getCDKFScaleDigits getCDKFScaleHighValue getCDKFScaleLowValue getCDKFScaleValue injectCDKFScale moveCDKFScale newCDKFScale positionCDKFScale setCDKFScale setCDKFScaleBackgroundAttrib setCDKFScaleBackgroundColor setCDKFScaleBox setCDKFScaleBoxAttribute setCDKFScaleDigits setCDKFScaleHorizontalChar setCDKFScaleLLChar setCDKFScaleLRChar setCDKFScaleLowHigh setCDKFScalePostProcess setCDKFScalePreProcess setCDKFScaleULChar setCDKFScaleURChar setCDKFScaleValue setCDKFScaleVerticalChar cdk_fscale(3): Cdk scale widget (type float)
activateCDKFSlider(3), activateCDKFSlider destroyCDKFSlider drawCDKFSlider eraseCDKFSlider getCDKFSliderBox getCDKFSliderDigits getCDKFSliderHighValue getCDKFSliderLowValue getCDKFSliderValue injectCDKFSlider moveCDKFSlider newCDKFSlider positionCDKFSlider setCDKFSlider setCDKFSliderBackgroundAttrib setCDKFSliderBackgroundColor setCDKFSliderBox setCDKFSliderBoxAttribute setCDKFSliderDigits setCDKFSliderHorizontalChar setCDKFSliderLLChar setCDKFSliderLRChar setCDKFSliderLowHigh setCDKFSliderPostProcess setCDKFSliderPreProcess setCDKFSliderULChar setCDKFSliderURChar setCDKFSliderValue setCDKFSliderVerticalChar cdk_fslider(3): Cdk slider widget (type float)
activateCDKFselect(3), activateCDKFselect deleteFileCB destroyCDKFselect drawCDKFselect eraseCDKFselect getCDKFselectBox getCDKFselectContents getCDKFselectCurrentItem getCDKFselectDirAttribute getCDKFselectDirContents getCDKFselectDirectory getCDKFselectFileAttribute getCDKFselectFillerChar getCDKFselectHighlight getCDKFselectLinkAttribute getCDKFselectSocketAttribute injectCDKFselect moveCDKFselect newCDKFselect positionCDKFselect setCDKFselect setCDKFselectBackgroundAttrib setCDKFselectBackgroundColor setCDKFselectBox setCDKFselectBoxAttribute setCDKFselectContents setCDKFselectCurrentItem setCDKFselectDirAttribute setCDKFselectDirContents setCDKFselectDirectory setCDKFselectFileAttribute setCDKFselectFillerChar setCDKFselectHighlight setCDKFselectHorizontalChar setCDKFselectLLChar setCDKFselectLRChar setCDKFselectLinkAttribute setCDKFselectSocketAttribute setCDKFselectULChar setCDKFselectURChar setCDKFselectVerticalChar cdk_fselect(3): Cdk file selector widget
activateCDKGraph(3), activateCDKGraph destroyCDKGraph drawCDKGraph eraseCDKGraph getCDKGraphBox getCDKGraphCharacter getCDKGraphCharacters getCDKGraphDisplayType getCDKGraphValue getCDKGraphValues moveCDKGraph newCDKGraph positionCDKGraph setCDKGraph setCDKGraphBackgroundAttrib setCDKGraphBackgroundColor setCDKGraphBox setCDKGraphBoxAttribute setCDKGraphCharacter setCDKGraphCharacters setCDKGraphDisplayType setCDKGraphHorizontalChar setCDKGraphLLChar setCDKGraphLRChar setCDKGraphULChar setCDKGraphURChar setCDKGraphValue setCDKGraphValues setCDKGraphVerticalChar cdk_graph(3): Cdk graph widget
activateCDKHistogram(3), activateCDKHistogram destroyCDKHistogram drawCDKHistogram eraseCDKHistogram getCDKHistogramBox getCDKHistogramFillerChar getCDKHistogramHighValue getCDKHistogramLowValue getCDKHistogramStatsAttr getCDKHistogramStatsPos getCDKHistogramValue getCDKHistogramViewType moveCDKHistogram newCDKHistogram positionCDKHistogram setCDKHistogram setCDKHistogramBackgroundAttrib setCDKHistogramBackgroundColor setCDKHistogramBox setCDKHistogramBoxAttribute setCDKHistogramDisplayType setCDKHistogramFillerChar setCDKHistogramHorizontalChar setCDKHistogramLLChar setCDKHistogramLRChar setCDKHistogramStatsAttr setCDKHistogramStatsPos setCDKHistogramULChar setCDKHistogramURChar setCDKHistogramValue setCDKHistogramVerticalChar setCDKHistogramViewType cdk_histogram(3): Cdk histogram widget
activateCDKItemlist(3), activateCDKItemlist destroyCDKItemlist drawCDKItemlist drawCDKItemlistField eraseCDKItemlist getCDKItemlistBox getCDKItemlistCurrentItem getCDKItemlistDefaultItem getCDKItemlistValues injectCDKItemlist moveCDKItemlist newCDKItemlist positionCDKItemlist setCDKItemlist setCDKItemlistBackgroundAttrib setCDKItemlistBackgroundColor setCDKItemlistBox setCDKItemlistBoxAttribute setCDKItemlistCurrentItem setCDKItemlistDefaultItem setCDKItemlistHorizontalChar setCDKItemlistLLChar setCDKItemlistLRChar setCDKItemlistPostProcess setCDKItemlistPreProcess setCDKItemlistULChar setCDKItemlistURChar setCDKItemlistValues setCDKItemlistVerticalChar cdk_itemlist(3): Cdk itemlist widget
activateCDKLabel(3), activateCDKLabel destroyCDKLabel drawCDKLabel eraseCDKLabel getCDKLabelBox getCDKLabelMessage moveCDKLabel newCDKLabel positionCDKLabel setCDKLabel setCDKLabelBackgroundAttrib setCDKLabelBackgroundColor setCDKLabelBox setCDKLabelBoxAttribute setCDKLabelHorizontalChar setCDKLabelLLChar setCDKLabelLRChar setCDKLabelMessage setCDKLabelULChar setCDKLabelURChar setCDKLabelVerticalChar waitCDKLabel cdk_label(3): Cdk label widget
activateCDKMarquee(3), activateCDKMarquee deactivateCDKMarquee destroyCDKMarquee drawCDKMarquee eraseCDKMarquee getCDKMarqueeBox moveCDKMarquee newCDKMarquee positionCDKMarquee setCDKMarqueeBackgroundAttrib setCDKMarqueeBackgroundColor setCDKMarqueeBox setCDKMarqueeBoxAttribute setCDKMarqueeHorizontalChar setCDKMarqueeLLChar setCDKMarqueeLRChar setCDKMarqueeULChar setCDKMarqueeURChar setCDKMarqueeVerticalChar cdk_marquee(3): Cdk marquee widget
activateCDKMatrix(3), activateCDKMatrix cleanCDKMatrix cleanCDKMatrixCell destroyCDKMatrix drawCDKMatrix eraseCDKMatrix getCDKMatrixBox getCDKMatrixCell getCDKMatrixCol getCDKMatrixRow injectCDKMatrix jumpToCell moveToCDKMatrixCell newCDKMatrix setCDKMatrix setCDKMatrixBackgroundAttrib setCDKMatrixBackgroundColor setCDKMatrixBox setCDKMatrixBoxAttribute setCDKMatrixCB setCDKMatrixCell setCDKMatrixCells setCDKMatrixHorizontalChar setCDKMatrixLLChar setCDKMatrixLRChar setCDKMatrixPostProcess setCDKMatrixPreProcess setCDKMatrixULChar setCDKMatrixURChar setCDKMatrixVerticalChar cdk_matrix(3): Cdk matrix widget
activateCDKMentry(3), activateCDKMentry cleanCDKMentry destroyCDKMentry drawCDKMentry drawCDKMentryField eraseCDKMentry getCDKMentryBox getCDKMentryFillerChar getCDKMentryHiddenChar getCDKMentryMin getCDKMentryValue injectCDKMentry moveCDKMentry newCDKMentry positionCDKMentry setCDKMentry setCDKMentryBackgroundAttrib setCDKMentryBackgroundColor setCDKMentryBox setCDKMentryBoxAttribute setCDKMentryCB setCDKMentryFillerChar setCDKMentryHiddenChar setCDKMentryHorizontalChar setCDKMentryLLChar setCDKMentryLRChar setCDKMentryMin setCDKMentryPostProcess setCDKMentryPreProcess setCDKMentryULChar setCDKMentryURChar setCDKMentryValue setCDKMentryVerticalChar cdk_mentry(3): Cdk multiple line entry widget
activateCDKMenu(3), activateCDKMenu destroyCDKMenu drawCDKMenu drawCDKMenuSubwin eraseCDKMenu eraseCDKMenuSubwin getCDKMenuCurrentItem getCDKMenuSubTitleHighlight getCDKMenuTitleHighlight injectCDKMenu newCDKMenu setCDKMenu setCDKMenuBackgroundAttrib setCDKMenuBackgroundColor setCDKMenuCurrentItem setCDKMenuPostProcess setCDKMenuPreProcess setCDKMenuSubTitleHighlight setCDKMenuTitleHighlight cdk_menu(3): Cdk menu widget
activateCDKRadio(3), activateCDKRadio destroyCDKRadio drawCDKRadio eraseCDKRadio getCDKRadioBox getCDKRadioChoiceCharacter getCDKRadioCurrentItem getCDKRadioHighlight getCDKRadioItems getCDKRadioLeftBrace getCDKRadioRightBrace getCDKRadioSelectedItem injectCDKRadio moveCDKRadio newCDKRadio positionCDKRadio setCDKRadio setCDKRadioBackgroundAttrib setCDKRadioBackgroundColor setCDKRadioBox setCDKRadioBoxAttribute setCDKRadioChoiceCharacter setCDKRadioCurrentItem setCDKRadioHighlight setCDKRadioHorizontalChar setCDKRadioItems setCDKRadioLLChar setCDKRadioLRChar setCDKRadioLeftBrace setCDKRadioPostProcess setCDKRadioPreProcess setCDKRadioRightBrace setCDKRadioSelectedItem setCDKRadioULChar setCDKRadioURChar setCDKRadioVerticalChar cdk_radio(3): Cdk radio list widget
activateCDKScale(3), activateCDKScale destroyCDKScale drawCDKScale eraseCDKScale getCDKScaleBox getCDKScaleHighValue getCDKScaleLowValue getCDKScaleValue injectCDKScale moveCDKScale newCDKScale positionCDKScale setCDKScale setCDKScaleBackgroundAttrib setCDKScaleBackgroundColor setCDKScaleBox setCDKScaleBoxAttribute setCDKScaleHorizontalChar setCDKScaleLLChar setCDKScaleLRChar setCDKScaleLowHigh setCDKScalePostProcess setCDKScalePreProcess setCDKScaleULChar setCDKScaleURChar setCDKScaleValue setCDKScaleVerticalChar cdk_scale(3): Cdk scale widget (type int)
activateCDKScroll(3), activateCDKScroll addCDKScrollItem deleteCDKScrollItem destroyCDKScroll drawCDKScroll eraseCDKScroll getCDKScrollBox getCDKScrollCurrent getCDKScrollCurrentItem getCDKScrollCurrentTop getCDKScrollHighlight getCDKScrollItems injectCDKScroll insertCDKScrollItem moveCDKScroll newCDKScroll positionCDKScroll setCDKScroll setCDKScrollBackgroundAttrib setCDKScrollBackgroundColor setCDKScrollBox setCDKScrollBoxAttribute setCDKScrollCurrent setCDKScrollCurrentItem setCDKScrollCurrentTop setCDKScrollHighlight setCDKScrollHorizontalChar setCDKScrollItems setCDKScrollLLChar setCDKScrollLRChar setCDKScrollPosition setCDKScrollPostProcess setCDKScrollPreProcess setCDKScrollULChar setCDKScrollURChar setCDKScrollVerticalChar cdk_scroll(3): Cdk scrolling list widget
activateCDKSelection(3), activateCDKSelection destroyCDKSelection drawCDKSelection eraseCDKSelection getCDKSelectionBox getCDKSelectionChoice getCDKSelectionChoices getCDKSelectionCurrent getCDKSelectionHighlight getCDKSelectionItems getCDKSelectionMode getCDKSelectionModes getCDKSelectionTitle injectCDKSelection moveCDKSelection newCDKSelection positionCDKSelection setCDKSelection setCDKSelectionBackgroundAttrib setCDKSelectionBackgroundColor setCDKSelectionBox setCDKSelectionBoxAttribute setCDKSelectionChoice setCDKSelectionChoices setCDKSelectionCurrent setCDKSelectionHighlight setCDKSelectionHorizontalChar setCDKSelectionItems setCDKSelectionLLChar setCDKSelectionLRChar setCDKSelectionMode setCDKSelectionModes setCDKSelectionPostProcess setCDKSelectionPreProcess setCDKSelectionTitle setCDKSelectionULChar setCDKSelectionURChar setCDKSelectionVerticalChar cdk_selection(3): Cdk selection list widget
activateCDKSlider(3), activateCDKSlider destroyCDKSlider drawCDKSlider eraseCDKSlider getCDKSliderBox getCDKSliderHighValue getCDKSliderLowValue getCDKSliderValue injectCDKSlider moveCDKSlider newCDKSlider positionCDKSlider setCDKSlider setCDKSliderBackgroundAttrib setCDKSliderBackgroundColor setCDKSliderBox setCDKSliderBoxAttribute setCDKSliderHorizontalChar setCDKSliderLLChar setCDKSliderLRChar setCDKSliderLowHigh setCDKSliderPostProcess setCDKSliderPreProcess setCDKSliderULChar setCDKSliderURChar setCDKSliderValue setCDKSliderVerticalChar cdk_slider(3): Cdk slider widget (type int)
activateCDKSwindow(3), activateCDKSwindow addCDKSwindow cleanCDKSwindow destroyCDKSwindow drawCDKSwindow dumpCDKSwindow eraseCDKSwindow execCDKSwindow getCDKSwindowBox getCDKSwindowContents injectCDKSwindow jumpToLineCDKSwindow loadCDKSwindowInformation moveCDKSwindow newCDKSwindow positionCDKSwindow saveCDKSwindowInformation setCDKSwindow setCDKSwindowBackgroundAttrib setCDKSwindowBackgroundColor setCDKSwindowBox setCDKSwindowBoxAttribute setCDKSwindowContents setCDKSwindowHorizontalChar setCDKSwindowLLChar setCDKSwindowLRChar setCDKSwindowPostProcess setCDKSwindowPreProcess setCDKSwindowULChar setCDKSwindowURChar setCDKSwindowVerticalChar trimCDKSwindow cdk_swindow(3): Cdk scrolling window widget
activateCDKTemplate(3), activateCDKTemplate cleanCDKTemplate destroyCDKTemplate drawCDKTemplate eraseCDKTemplate getCDKTemplateBox getCDKTemplateMin getCDKTemplateValue injectCDKTemplate mixCDKTemplate newCDKTemplate setCDKTemplate setCDKTemplateBackgroundAttrib setCDKTemplateBackgroundColor setCDKTemplateBox setCDKTemplateBoxAttribute setCDKTemplateCB setCDKTemplateHorizontalChar setCDKTemplateLLChar setCDKTemplateLRChar setCDKTemplateMin setCDKTemplatePostProcess setCDKTemplatePreProcess setCDKTemplateULChar setCDKTemplateURChar setCDKTemplateValue setCDKTemplateVerticalChar unmixCDKTemplate cdk_template(3): Cdk template widget
activateCDKUScale(3), activateCDKUScale destroyCDKUScale drawCDKUScale eraseCDKUScale getCDKUScaleBox getCDKUScaleHighValue getCDKUScaleLowValue getCDKUScaleValue injectCDKUScale moveCDKUScale newCDKUScale positionCDKUScale setCDKUScale setCDKUScaleBackgroundAttrib setCDKUScaleBackgroundColor setCDKUScaleBox setCDKUScaleBoxAttribute setCDKUScaleHorizontalChar setCDKUScaleLLChar setCDKUScaleLRChar setCDKUScaleLowHigh setCDKUScalePostProcess setCDKUScalePreProcess setCDKUScaleULChar setCDKUScaleURChar setCDKUScaleValue setCDKUScaleVerticalChar cdk_uscale(3): Cdk scale widget (type unsigned)
activateCDKUSlider(3), activateCDKUSlider destroyCDKUSlider drawCDKUSlider eraseCDKUSlider getCDKUSliderBox getCDKUSliderHighValue getCDKUSliderLowValue getCDKUSliderValue injectCDKUSlider moveCDKUSlider newCDKUSlider positionCDKUSlider setCDKUSlider setCDKUSliderBackgroundAttrib setCDKUSliderBackgroundColor setCDKUSliderBox setCDKUSliderBoxAttribute setCDKUSliderHorizontalChar setCDKUSliderLLChar setCDKUSliderLRChar setCDKUSliderLowHigh setCDKUSliderPostProcess setCDKUSliderPreProcess setCDKUSliderULChar setCDKUSliderURChar setCDKUSliderValue setCDKUSliderVerticalChar cdk_uslider(3): Cdk slider widget (type unsigned)
activateCDKViewer(3), activateCDKViewer cleanCDKViewer destroyCDKViewer drawCDKViewer eraseCDKViewer getCDKViewerBox getCDKViewerHighlight getCDKViewerInfo getCDKViewerInfoLine getCDKViewerTitle moveCDKViewer newCDKViewer positionCDKViewer setCDKViewer setCDKViewerBackgroundAttrib setCDKViewerBackgroundColor setCDKViewerBox setCDKViewerBoxAttribute setCDKViewerHighlight setCDKViewerHorizontalChar setCDKViewerInfo setCDKViewerInfoLine setCDKViewerLLChar setCDKViewerLRChar setCDKViewerTitle setCDKViewerULChar setCDKViewerURChar setCDKViewerVerticalChar cdk_viewer(3): Cdk viewer list widget
afSeekFrame(3), afTellFrame(3): update or access the current sample frame position for a track in an audio file
afew(1): afew Documentation afew is an initial tagging script for notmuch mail: 0.0 (bu 2 %http://notmuchmail.org/ (bu 2 %http://notmuchmail.org/initial_tagging/ Its basic task is to provide automatic tagging each time new mail is registered with notmuch. In a classic setup, you might call it after notmuch new in an offlineimap post sync hook or in the notmuch post-new hook. It can do basic thing such as adding tags based on email headers or maildir folders, handling killed threads and spam. fyi: afew plays nicely with alot, a GUI for notmuch mail ;) 0.0 (bu 2 %https://github.com/pazz/alot Contents:
airbase-ng(8): multi-purpose tool aimed at attacking clients as opposed to the Access Point (AP) itself
airmon-ng(8): POSIX sh script designed to turn wireless cards into monitor mode
al_can_get_mouse_cursor_position(3): Allegro 5 API
al_compose_transform(3): Allegro 5 API
al_get_audio_stream_position_secs(3): Allegro 5 API
al_get_d3d_texture_position(3): Allegro 5 API
al_get_mouse_cursor_position(3): Allegro 5 API
al_get_new_window_position(3): Allegro 5 API
al_get_opengl_texture_position(3): Allegro 5 API
al_get_sample_instance_position(3): Allegro 5 API
al_get_video_position(3): Allegro 5 API
al_get_voice_position(3): Allegro 5 API
al_get_window_position(3): Allegro 5 API
al_set_mixer_postprocess_callback(3): Allegro 5 API
al_set_new_window_position(3): Allegro 5 API
al_set_sample_instance_position(3): Allegro 5 API
al_set_voice_position(3): Allegro 5 API
al_set_window_position(3): Allegro 5 API
al_transpose_transform(3): Allegro 5 API
ampgsql(8): Amanda Application to interface with PostgreSQL
anvil(8): Postfix session count and request rate control
apertium-postchunk(1): intermediate transfer module tool for Apertium
apertium-postlatex(1): ASCII LaTeX code generator for Apertium
apertium-postlatex-raw(1): LaTeX code generator for Apertium
apertium-validate-postchunk(1): intermediate postchunk rule validator for Apertium
appjail-expose(1): Port forwarding from host port to jail port
appstream-compose(1): Generate AppStream metadata
apropos(1), whatis(1): search manual page databases
archive_util(3), archive_clear_error(3), archive_compression(3), archive_compression_name(3), archive_copy_error(3), archive_errno(3), archive_error_string(3), archive_file_count(3), archive_filter_code(3), archive_filter_count(3), archive_filter_name(3), archive_format(3), archive_format_name(3), archive_position(3), archive_set_error(3): libarchive utility functions
ares_create_query(3): Compose a single-question DNS query buffer
ares_mkquery(3): Compose a single-question DNS query buffer
asimagexml(1x): XML schema to be used for scripting image manipulation by AfterStep and ascompose libAfterImage/asimagexml
asterisk(8): All-purpose telephony server
astmatch(1), Match(1): match catalogs by 1D or 2D positions
astscript-pointing-simulate(1): Simulate the exposure map of a pointing pattern
atf-sh(3), atf_add_test_case(3), atf_check(3), atf_check_equal(3), atf_check_not_equal(3), atf_config_get(3), atf_config_has(3), atf_expect_death(3), atf_expect_exit(3), atf_expect_fail(3), atf_expect_pass(3), atf_expect_signal(3), atf_expect_timeout(3), atf_fail(3), atf_get(3), atf_get_srcdir(3), atf_pass(3), atf_require_prog(3), atf_set(3), atf_skip(3), atf_test_case(3): POSIX shell API to write ATF-based test programs
attraction(6): interactions of opposing forces
audio_listener(3), audio_listener (3): Bind the current device listener to a positioner video object
audio_outputs(3), audio_outputs (3): Returns a list of possible device names for audio_reconfigure
audio_position(3), audio_position (3): Bind an audio source to a positioner video object
audiocompose(1): Compose an audio fragment for inclusion in a mail message
autooptimiser(1): Optimize image positions
avs2ps(l): convert AVS image input on stdin to monochrome PostScript on stdout
barman-cloud-backup(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-backup [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ { { -z | --gzip } | { -j | --bzip2 } | --snappy } ] [ { -h | --host } HOST ] [ { -p | --port } PORT ] [ { -U | --user } USER ] [ { -d | --dbname } DBNAME ] [ { -n | --name } BACKUP_NAME ] [ { -J | --jobs } JOBS ] [ { -S | --max-archive-size } MAX_ARCHIVE_SIZE ] [ --immediate-checkpoint ] [ --min-chunk-size MIN_CHUNK_SIZE ] [ --max-bandwidth MAX_BANDWIDTH ] [ --snapshot-instance SNAPSHOT_INSTANCE ] [ --snapshot-disk NAME [ --snapshot-disk NAME ... ] ] [ --snapshot-zone GCP_ZONE ] [ -snapshot-gcp-project GCP_PROJECT ] [ --tag KEY,VALUE [ --tag KEY,VALUE ... ] ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { -e | --encryption } { AES256 | aws:kms } ] [ --sse-kms-key-id SSE_KMS_KEY_ID ] [ --aws-region AWS_REGION ] [ --aws-await-snapshots-timeout AWS_AWAIT_SNAPSHOTS_TIMEOUT ] [ --aws-snapshot-lock-mode { compliance | governance } ] [ --aws-snapshot-lock-duration DAYS ] [ --aws-snapshot-lock-cool-off-period HOURS ] [ --aws-snapshot-lock-expiration-date DATETIME ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --encryption-scope ENCRYPTION_SCOPE ] [ --azure-subscription-id AZURE_SUBSCRIPTION_ID ] [ --azure-resource-group AZURE_RESOURCE_GROUP ] [ --gcp-project GCP_PROJECT ] [ --kms-key-name KMS_KEY_NAME ] [ --gcp-zone GCP_ZONE ] DESTINATION_URL SERVER_NAME Description The barman-cloud-backup script is used to create a local backup of a Postgres server and transfer it to a supported cloud provider, bypassing the Barman server. It can also be utilized as a hook script for copying Barman backups from the Barman server to one of the supported clouds (post_backup_retry_script). This script requires read access to PGDATA and tablespaces, typically run as the postgres user. When used on a Barman server, it requires read access to the directory where Barman backups are stored. If --snapshot- arguments are used and snapshots are supported by the selected cloud provider, the backup will be performed using snapshots of the specified disks (--snapshot-disk). The backup label and metadata will also be uploaded to the cloud. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. IMPORTANT: 0.0 3.5 The cloud upload may fail if any file larger than the configured --max-archive-size is present in the data directory or tablespaces. However, Postgres files up to 1GB are always allowed, regardless of the --max-archive-size setting. Parameters 0.0 SERVER_NAME Name of the server to be backed up. DESTINATION_URL URL of the cloud destination, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. -z / --gzip gzip-compress the backup while uploading to the cloud (should not be used with python < 3.2). -j / --bzip2 bzip2-compress the backup while uploading to the cloud (should not be used with python < 3.3). --snappy snappy-compress the backup while uploading to the cloud (requires optional python-snappy library). -h / --host Host or Unix socket for Postgres connection (default: libpq settings). -p / --port Port for Postgres connection (default: libpq settings). -U / --user User name for Postgres connection (default: libpq settings). -d / --dbname Database name or conninfo string for Postgres connection (default: (dqpostgres(dq). -n / --name A name which can be used to reference this backup in commands such as barman-cloud-restore and barman-cloud-backup-delete. -J / --jobs Number of subprocesses to upload data to cloud storage (default: 2). -S / --max-archive-size Maximum size of an archive when uploading to cloud storage (default: 100GB). --immediate-checkpoint Forces the initial checkpoint to be done as quickly as possible. --min-chunk-size Minimum size of an individual chunk when uploading to cloud storage (default: 5MB for aws-s3, 64KB for azure-blob-storage, not applicable for google-cloud-storage). --max-bandwidth The maximum amount of data to be uploaded per second when backing up to object storages (default: 0 - no limit). --snapshot-instance Instance where the disks to be backed up as snapshots are attached. --snapshot-disk Name of a disk from which snapshots should be taken. --tag Tag to be added to all uploaded files in cloud storage, and/or to snapshots created, if snapshots are used. --tags Tags to be added to all uploaded files in cloud storage, and/or to snapshots created, if snapshots are used. NOTE: 0.0 3.5 If you are using --tags before positional arguments, you must insert -- after it to indicate the end of optional arguments. This tells the parser to treat everything after -- as positional arguments. Without the --, Barman may misinterpret positional arguments as values for the last option. Deprecated since version 3.15: --tags is deprecated. Use --tag instead. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). -e / --encryption The encryption algorithm used when storing the uploaded data in S3. Allowed options: 7.0 (bu 2 AES256. (bu 2 aws:kms. --sse-kms-key-id The AWS KMS key ID that should be used for encrypting the uploaded data in S3. Can be specified using the key ID on its own or using the full ARN for the key. Only allowed if -e / --encryption is set to aws:kms. --aws-region The name of the AWS region containing the EC2 VM and storage volumes defined by the --snapshot-instance and --snapshot-disk arguments. --aws-await-snapshots-timeout The length of time in seconds to wait for snapshots to be created in AWS before timing out (default: 3600 seconds). --aws-snapshot-lock-mode The lock mode for the snapshot. This is only valid if --snapshot-instance and --snapshot-disk are set. Allowed options: 7.0 (bu 2 compliance. (bu 2 governance. --aws-snapshot-lock-duration The lock duration is the period of time (in days) for which the snapshot is to remain locked, ranging from 1 to 36,500. Set either the lock duration or the expiration date (not both). --aws-snapshot-lock-cool-off-period The cooling-off period is an optional period of time (in hours) that you can specify when you lock a snapshot in compliance mode, ranging from 1 to 72. --aws-snapshot-lock-expiration-date The lock duration is determined by an expiration date in the future. It must be at least 1 day after the snapshot creation date and time, using the format YYYY-MM-DDTHH:MM:SS.sssZ. Set either the lock duration or the expiration date (not both). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default. --encryption-scope The name of an encryption scope defined in the Azure Blob Storage service which is to be used to encrypt the data in Azure. --azure-subscription-id The ID of the Azure subscription which owns the instance and storage volumes defined by the --snapshot-instance and --snapshot-disk arguments. --azure-resource-group The name of the Azure resource group to which the compute instance and disks defined by the --snapshot-instance and --snapshot-disk arguments belong. Extra options for GCP cloud provider 0.0 --gcp-project GCP project under which disk snapshots should be stored. --snapshot-gcp-project (deprecated) GCP project under which disk snapshots should be stored - replaced by --gcp-project. --kms-key-name The name of the GCP KMS key which should be used for encrypting the uploaded data in GCS. --gcp-zone Zone of the disks from which snapshots should be taken. --snapshot-zone (deprecated) Zone of the disks from which snapshots should be taken - replaced by --gcp-zone
barman-cloud-check-wal-archive(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-check-wal-archive [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --timeline TIMELINE ] DESTINATION_URL SERVER_NAME Description Verify that the WAL archive destination for a server is suitable for use with a new Postgres cluster. By default, the check will succeed if the WAL archive is empty or if the target bucket is not found. Any other conditions will result in a failure. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 SERVER_NAME Name of the server that needs to be checked. DESTINATION_URL URL of the cloud destination, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. --timeline The earliest timeline whose WALs should cause the check to fail. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default
barman-cloud-restore(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-restore [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --snapshot-recovery-instance SNAPSHOT_RECOVERY_INSTANCE ] [ --snapshot-recovery-zone GCP_ZONE ] [ --aws-region AWS_REGION ] [ --gcp-zone GCP_ZONE ] [ --azure-resource-group AZURE_RESOURCE_GROUP ] [ --tablespace NAME:LOCATION [ --tablespace NAME:LOCATION ... ] ] [ --target-lsn LSN ] [ --target-time TIMESTAMP ] [ --target-tli TLI ] SOURCE_URL SERVER_NAME BACKUP_ID RECOVERY_DESTINATION Description Use this script to restore a backup directly from cloud storage that was created with the barman-cloud-backup command. Additionally, this script can prepare for recovery from a snapshot backup by verifying that attached disks were cloned from the correct snapshots and by downloading the backup label from object storage. This command does not automatically prepare Postgres for recovery. You must manually manage any %PITR options, custom restore_command values, signal files, or required WAL files to ensure Postgres starts, either manually or using external tools. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 SERVER_NAME Name of the server that holds the backup to be restored. SOURCE_URL URL of the cloud source, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. BACKUP_ID The ID of the backup to be restored. You can use a shortcut instead of the backup ID. Besides that, you can use auto to have Barman automatically find the most suitable backup for the restore operation. RECOVERY_DESTINATION The path to a directory for recovery. -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. --snapshot-recovery-instance Instance where the disks recovered from the snapshots are attached. --tablespace Tablespace relocation rule. --target-lsn The recovery target lsn, e.g., 3/64000000. --target-time The recovery target timestamp with or without timezone, in the format %Y-%m-%d %H:%M:%S. --target-tli The recovery target timeline. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). --aws-region The name of the AWS region containing the EC2 VM and storage volumes defined by the --snapshot-instance and --snapshot-disk arguments. Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default. --azure-resource-group The name of the Azure resource group to which the compute instance and disks defined by the --snapshot-instance and --snapshot-disk arguments belong. Extra options for GCP cloud provider 0.0 --gcp-zone Zone of the disks from which snapshots should be taken. --snapshot-recovery-zone (deprecated) Zone containing the instance and disks for the snapshot recovery - replaced by --gcp-zone
barman-cloud-wal-archive(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-wal-archive [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ { { -z | --gzip } | { -j | --bzip2 } | --xz | --snappy | --zstd | --lz4 } ] [ --compression-level COMPRESSION_LEVEL ] [ --tag KEY,VALUE [ --tag KEY,VALUE ... ] ] [ --history-tag KEY,VALUE [ --history-tag KEY,VALUE ... ] ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { -e | --encryption } ENCRYPTION ] [ --sse-kms-key-id SSE_KMS_KEY_ID ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --encryption-scope ENCRYPTION_SCOPE ] [ --max-block-size MAX_BLOCK_SIZE ] [ --max-concurrency MAX_CONCURRENCY ] [ --max-single-put-size MAX_SINGLE_PUT_SIZE ] [ --kms-key-name KMS_KEY_NAME ] DESTINATION_URL SERVER_NAME [ WAL_PATH ] Description The barman-cloud-wal-archive command is designed to be used in the archive_command of a Postgres server to directly ship WAL files to cloud storage. NOTE: 0.0 3.5 If you are using Python 2 or unsupported versions of Python 3, avoid using the compression options --gzip or --bzip2. The script cannot restore gzip-compressed WALs on Python < 3.2 or bzip2-compressed WALs on Python < 3.3. This script enables the direct transfer of WAL files to cloud storage, bypassing the Barman server. Additionally, it can be utilized as a hook script for WAL archiving (pre_archive_retry_script). NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 SERVER_NAME Name of the server that will have the WALs archived. DESTINATION_URL URL of the cloud destination, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. WAL_PATH The value of the (aq%p(aq keyword (according to archive_command). -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. -z / --gzip gzip-compress the WAL while uploading to the cloud. -j / --bzip2 bzip2-compress the WAL while uploading to the cloud. --xz xz-compress the WAL while uploading to the cloud. --snappy snappy-compress the WAL while uploading to the cloud (requires the python-snappy Python library to be installed). --zstd zstd-compress the WAL while uploading to the cloud (requires the zstandard Python library to be installed). --lz4 lz4-compress the WAL while uploading to the cloud (requires the lz4 Python library to be installed). --compression-level A compression level to be used by the selected compression algorithm. Valid values are integers within the supported range of the chosen algorithm or one of the predefined labels: low, medium, and high. The range of each algorithm as well as what level each predefined label maps to can be found in %compression_level. --tag Tag to be added to archived WAL files in cloud storage. --tags Tag to be added to archived WAL files in cloud storage. NOTE: 0.0 3.5 If you are using --tags before positional arguments, you must insert -- after it to indicate the end of optional arguments. This tells the parser to treat everything after -- as positional arguments. Without the --, Barman may misinterpret positional arguments as values for the last option. Deprecated since version 3.15: --tags is deprecated. Use --tag instead. 0.0 --history-tag Tag to be added to archived history files in cloud storage. --history-tags Tags to be added to archived history files in cloud storage. NOTE: 0.0 3.5 If you are using --history-tags before positional arguments, you must insert -- after it to indicate the end of optional arguments. This tells the parser to treat everything after -- as positional arguments. Without the --, Barman may misinterpret positional arguments as values for the last option. Deprecated since version 3.15: --history-tags is deprecated. Use --history-tag instead. Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). -e / --encryption The encryption algorithm used when storing the uploaded data in S3. Allowed options: 7.0 (bu 2 AES256. (bu 2 aws:kms. --sse-kms-key-id The AWS KMS key ID that should be used for encrypting the uploaded data in S3. Can be specified using the key ID on its own or using the full ARN for the key. Only allowed if -e / --encryption is set to aws:kms. Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default. --encryption-scope The name of an encryption scope defined in the Azure Blob Storage service which is to be used to encrypt the data in Azure. --max-block-size The chunk size to be used when uploading an object via the concurrent chunk method (default: 4MB). --max-concurrency The maximum number of chunks to be uploaded concurrently (default: 1). --max-single-put-size Maximum size for which the Azure client will upload an object in a single request (default: 64MB). If this is set lower than the Postgres WAL segment size after any applied compression then the concurrent chunk upload method for WAL archiving will be used. Extra options for GCP cloud provider 0.0 --kms-key-name The name of the GCP KMS key which should be used for encrypting the uploaded data in GCS
barman-cloud-wal-restore(1) - Barman-cloud Commands Synopsis 0.0 3.5 barman-cloud-wal-restore [ { -V | --version } ] [ --help ] [ { { -v | --verbose } | { -q | --quiet } } ] [ { -t | --test } ] [ --cloud-provider { aws-s3 | azure-blob-storage | google-cloud-storage } ] [ --endpoint-url ENDPOINT_URL ] [ { -P | --aws-profile } AWS_PROFILE ] [ --profile AWS_PROFILE ] [ --read-timeout READ_TIMEOUT ] [ { --azure-credential | --credential } { azure-cli | managed-identity | default } ] [ --no-partial ] SOURCE_URL SERVER_NAME WAL_NAME WAL_DEST Description The barman-cloud-wal-restore script functions as the restore_command for retrieving WAL files from cloud storage and placing them directly into a Postgres standby server, bypassing the Barman server. This script is used to download WAL files that were previously archived with the barman-cloud-wal-archive command. Disable automatic download of .partial files by calling --no-partial option. IMPORTANT: 0.0 3.5 On the target Postgres node, when pg_wal and the spool directory are on the same filesystem, files are moved via renaming, which is faster than copying and deleting. This speeds up serving WAL files significantly. If the directories are on different filesystems, the process still involves copying and deleting, so there(aqs no performance gain in that case. NOTE: 0.0 3.5 For GCP, only authentication with GOOGLE_APPLICATION_CREDENTIALS env is supported. Parameters 0.0 SERVER_NAME Name of the server that will have WALs restored. SOURCE_URL URL of the cloud source, such as a bucket in AWS S3. For example: s3://bucket/path/to/folder. WAL_NAME The value of the (aq%f(aq keyword (according to restore_command). WAL_DEST The value of the (aq%p(aq keyword (according to restore_command). -V / --version Show version and exit. --help show this help message and exit. -v / --verbose Increase output verbosity (e.g., -vv is more than -v). -q / --quiet Decrease output verbosity (e.g., -qq is less than -q). -t / --test Test cloud connectivity and exit. --cloud-provider The cloud provider to use as a storage backend. Allowed options are: 7.0 (bu 2 aws-s3. (bu 2 azure-blob-storage. (bu 2 google-cloud-storage. --no-partial Do not download partial WAL files Extra options for the AWS cloud provider 0.0 --endpoint-url Override default S3 endpoint URL with the given one. -P / --aws-profile Profile name (e.g. INI section in AWS credentials file). --profile (deprecated) Profile name (e.g. INI section in AWS credentials file): replaced by --aws-profile. --read-timeout The time in seconds until a timeout is raised when waiting to read from a connection (defaults to 60 seconds). Extra options for the Azure cloud provider 0.0 --azure-credential / --credential Optionally specify the type of credential to use when authenticating with Azure. If omitted then Azure Blob Storage credentials will be obtained from the environment and the default Azure authentication flow will be used for authenticating with all other Azure services. If no credentials can be found in the environment then the default Azure authentication flow will also be used for Azure Blob Storage. Allowed options are: 7.0 (bu 2 azure-cli. (bu 2 managed-identity. (bu 2 default
bdep-publish(1): publish project to archive repository
bearoffdump(6): dump a position from the GNU Backgammon bearoff database
beetsconfig(5): beets configuration file Beets has an extensive configuration system that lets you customize nearly every aspect of its operation. To configure beets, you create a file called config.yaml. The location of the file depends on your platform (type beet config -p to see the path on your system): 0.0 (bu 2 On Unix-like OSes, write ~/.config/beets/config.yaml. (bu 2 On Windows, use %APPDATA%ebeetseconfig.yaml. This is usually in a directory like C:eUserseYoueAppDataeRoaming. (bu 2 On OS X, you can use either the Unix location or ~/Library/Application Support/beets/config.yaml. You can launch your text editor to create or update your configuration by typing beet config -e. (See the X'tty: link #config-cmd'%configX'tty: link' command for details.) It is also possible to customize the location of the configuration file and even use multiple layers of configuration. See %Configuration Location, below. The config file uses X'tty: link https://yaml.org/'%YAMLX'tty: link' syntax. You can use the full power of YAML, but most configuration options are simple key/value pairs. This means your config file will look like this: 0.0 3.5 option: value another_option: foo bigger_option: key: value foo: bar In YAML, you will need to use spaces (not tabs!) to indent some lines. If you have questions about more sophisticated syntax, take a look at the X'tty: link https://yaml.org/'%YAMLX'tty: link' documentation. The rest of this page enumerates the dizzying litany of configuration options available in beets. You might also want to see an %example. 0.0 (bu 2 %Global Options 2.0 (bu 2 %library (bu 2 %directory (bu 2 %plugins (bu 2 %include (bu 2 %pluginpath (bu 2 %ignore (bu 2 %ignore_hidden (bu 2 %replace (bu 2 %path_sep_replace (bu 2 %asciify_paths (bu 2 %art_filename (bu 2 %threaded (bu 2 %format_item (bu 2 %format_album (bu 2 %sort_item (bu 2 %sort_album (bu 2 %sort_case_insensitive (bu 2 %original_date (bu 2 %artist_credit (bu 2 %per_disc_numbering (bu 2 %aunique (bu 2 %sunique (bu 2 %terminal_encoding (bu 2 %clutter (bu 2 %max_filename_length (bu 2 %id3v23 (bu 2 %va_name (bu 2 %UI Options 2.0 (bu 2 %color (bu 2 %colors (bu 2 %terminal_width (bu 2 %length_diff_thresh (bu 2 %import (bu 2 %Importer Options 2.0 (bu 2 %write (bu 2 %copy (bu 2 %move (bu 2 %link (bu 2 %hardlink (bu 2 %reflink (bu 2 %resume (bu 2 %incremental (bu 2 %incremental_skip_later (bu 2 %from_scratch (bu 2 %quiet (bu 2 %quiet_fallback (bu 2 %none_rec_action (bu 2 %timid (bu 2 %log (bu 2 %default_action (bu 2 %languages (bu 2 %ignored_alias_types (bu 2 %detail (bu 2 %group_albums (bu 2 %autotag (bu 2 %duplicate_keys (bu 2 %duplicate_action (bu 2 %duplicate_verbose_prompt (bu 2 %bell (bu 2 %set_fields (bu 2 %singleton_album_disambig (bu 2 %MusicBrainz Options 2.0 (bu 2 %enabled (bu 2 %searchlimit (bu 2 %extra_tags (bu 2 %genres (bu 2 %external_ids (bu 2 %Autotagger Matching Options 2.0 (bu 2 %max_rec (bu 2 %preferred (bu 2 %ignored (bu 2 %required (bu 2 %ignored_media (bu 2 %ignore_data_tracks (bu 2 %ignore_video_tracks (bu 2 %Path Format Configuration (bu 2 %Configuration Location 2.0 (bu 2 %Environment Variable (bu 2 %Command-Line Option (bu 2 %Default Location (bu 2 %Example
bench2graph(1): draws Postscript graphs from Autobench output (using gnuplot)
bl_bed_check_order(3), bl_bed_check_order()(3): Compare positions of two bed records
bl_bed_gff3_cmp(3), bl_bed_gff3_cmp()(3): Compare positions of BED and GFF3 objects
bl_gff3_sam_cmp(3), bl_gff3_sam_cmp()(3): Compare SAM/GFF3 positions
bl_pos_list_add_position(3), bl_pos_list_add_position()(3): Add a position to a list
bl_pos_list_allocate(3), bl_pos_list_allocate()(3): Initialize position list object
bl_pos_list_free(3), bl_pos_list_free()(3): Free a position list object
bl_pos_list_from_csv(3), bl_pos_list_from_csv()(3): Convert comma-separated data to position list
bl_pos_list_sort(3), bl_pos_list_sort()(3): Sort a position list
bl_sam_gff3_cmp(3), bl_sam_gff3_cmp()(3): Compare positions of SAM and GFF3 records
blind-transpose(1): Transpose a video
borg-break-lock(1): Break the repository lock (e.g. in case it was left by a dead borg
borg-change-passphrase(1): Change repository key file passphrase rst2man-indent-level 0 1 rstReportMargin $1
borg-check(1): Check repository consistency
borg-compact(1): compact segment files in the repository
borg-config(1): get, set, and delete values in a repository or cache config file
borg-delete(1): Delete an existing repository or archives
borg-init(1): Initialize an empty repository
borg-key(1): Manage a keyfile or repokey of a repository
borg-key-change-passphrase(1): Change repository key file passphrase
borg-key-export(1): Export the repository key for backup
borg-key-import(1): Import the repository key from backup
borg-list(1): List archive or repository contents
borg-mount(1): Mount archive or an entire repository as a FUSE filesystem
borg-prune(1): Prune repository archives according to specified rules
borg-upgrade(1): upgrade a repository from a previous version
borg-with-lock(1): run a user specified command with the repository lock held
borgfs(1): Mount archive or an entire repository as a FUSE filesystem
bounce(5): Postfix bounce message template format
bounce(8): Postfix delivery status reports
bpkg-rep-add(1): add repository to configuration
bpkg-rep-create(1): create repository
bpkg-rep-info(1): print repository information
bpkg-rep-list(1): list repositories in configuration
bpkg-rep-remove(1): remove repository from configuration
bpkg-repository-signing(1): how to sign repository
bpkg-repository-types(1): repository types, structure, and URLs
bup-fsck(1): verify or repair a bup repository
bup-ftp(1): ftp-like client for navigating bup repositories
bup-fuse(1): mount a bup repository as a filesystem
bup-get(1): copy repository items (CAUTION: EXPERIMENTAL)
bup-init(1): initialize a bup repository
bup-join(1): concatenate files from a bup repository
bup-ls(1): list the contents of a bup repository
bup-tag(1): tag a commit in the bup repository
bup-web(1): Start web server to browse bup repositiory
bzgrep(1), bzfgrep(1), bzegrep(1): search possibly bzip2 compressed files for a regular expression
bzz(1): DjVu general purpose compression utility
c2ps(1): converts a file with C/C++ code to Postscript
cage(1): a Wayland kiosk compositor
cage(6): Escher's impossible cage, for xscreensaver
cagebreak(1): A Wayland tiling compositor
callgrind_annotate(1): post-processing tool for the Callgrind
canonical(5): Postfix canonical table format
cataclysm(6): a turn-based survival game set in a post-apocalyptic world
cataclysm-tiles(6): a turn-based survival game set in a post-apocalyptic world
cdk_objs(3), cleanCdkTitle drawCdkTitle getCdkTitle positionCDKObject setCDKObjectBackgroundColor setCDKObjectPostProcess setCDKObjectPreProcess setCdkExitType setCdkTitle validCDKObject cdk_objs(3): Cdk object-support functions
cdk_position(3): Cdk widget positioning key-bindings
cdk_process(3): Cdk widget pre/post-processing
ceylon-compile(1), ceylon compile(1): Compiles Ceylon and Java source code and directly produces module and source archives in a module repository
ceylon-compile-js(1), ceylon compile-js(1): Compiles Ceylon source code to JavaScript and directly produces module and source archives in a module repository
ceylon-copy(1), ceylon copy(1): Copies modules from one Ceylon module repository to another
ceylon-import-jar(1), ceylon import-jar(1): Imports a jar file into a Ceylon module repository
ceylon-info(1), ceylon info(1): Prints information about modules in repositories
ceylon-maven-export(1), ceylon maven-export(1): Generate a Maven repository for a given module
ceylon-p2(1), ceylon p2(1): Generates p2 repository metadata suitable for Eclipse
ceylon-src(1), ceylon src(1): Fetches source archives from a repository and extracts their contents into a source directory
cfftot1(1): convert PostScript font from CFF to Type 1
cg_annotate(1): post-processing tool for Cachegrind
cidr_table(5): format of Postfix CIDR tables
cleanup(8): canonicalize and enqueue Postfix message
cless(1): opposite of more
clusterdb(1): cluster a PostgreSQL database
commit-patch(1): commit patches to Darcs, Git, Mercurial, Bazaar, Monotone, Subversion, or CVS repositories
comp(1): compose an nmh message
compose(1): Mail composer
composeBdd(3): substitutes an index by a BDD in another BDD
composebddnode(3): substitutes a variable by a bdd in another bdd. man1/alc_origin.1
composite(1): overlaps one image over another
compton(1): a compositor for X11
coredns-minimal(7), minimal(7): minimizes size of the DNS response message whenever possible
cpl_complete_word(3), cfc_file_start(3), cfc_literal_escapes(3), cfc_set_check_fn(3), cpl_add_completion(3), cpl_file_completions(3), cpl_last_error(3), cpl_list_completions(3), cpl_recall_matches(3), cpl_record_error(3), del_CplFileConf(3), del_WordCompletion(3), new_CplFileConf(3), new_WordCompletion(3): lookup possible completions for a word
cptpg(1): convert GMT colour palette tables (cpt) to PostGIS colour-maps
createdb(1): create a new PostgreSQL database
createrepo_c(8): Create rpm-md format (xml-rpm-metadata) repository rst2man-indent-level 0 1 rstReportMargin $1
createuser(1): define a new PostgreSQL user account
curl_formadd(3): add a section to a multipart form POST
curl_formfree(3): free a previously build multipart form post chain
curl_formget(3): serialize a multipart form POST chain
cursor_position(3), cursor_position (3): Retrieve the position of the mouse cursor
cvechecker(1): Attempt to identify possible vulnerable software on the system
cvsadmin(1): administrate users of a CVS repository B
cvsd-passwd(8): generate password entries for repositories
cvsgraph(1): A CVS/RCS repository grapher
cvsgraph.conf(5): CVS/RCS repository grapher configuration
cvsup(1): network distribution package for CVS repositories
cvsupd(8): network distribution server for CVS repositories
cvswrap(1): wrapper over cvs to enable fine grained access control to repositories
cvsync(1): synchronize CVS repositories
cvsyncd(1): synchronize CVS repositories
dblatex(1): convert DocBook to LaTeX, DVI, PostScript, and PDF
dblink_get_pkey(3): returns the positions and field names of a relations primary key fields
dcl2inc(1): postprocess ftnchek .dcl files to create separate INCLUDE files
dcmgpdir(1): Create a general purpose DICOMDIR
deb-postinst(5): package post-installation maintainer script
deb-postrm(5): package post-removal maintainer script
decomposemail(1): decompose mailboxes into their component email messages
discard(8): Postfix discard mail delivery agent
djvups(1): Convert DjVu documents to PostScript
djvused(1): Multi-purpose DjVu document editor
dnsblog(8): Postfix DNS allow/denylist logger
dnsjit.core.thread(3): POSIX thread with separate Lua state
dropdb(1): remove a PostgreSQL database
dropuser(1): remove a PostgreSQL user account
dspam_merge(1): merge several users' metadata into a composite
du2ps(1): filter for converting output of du to PostScript file
dummy-ups(8): Driver for multi-purpose UPS emulation or relay
dune(1): N'45' composable build system for OCaml
dvipos(1): compute positions in a DVI file
dvips(1): convert a TeX DVI file to PostScript
dvitomp(1): convert a TeX DVI file to a MetaPost MPXFILE
enscript(1): convert text files to PostScript, HTML, RTF, ANSI, and overstrikes
ensemble(i4), itcl::ensemble(i4): create or modify a composite command
ensemble(itcl): create or modify a composite command
eps(n): Encapsulated PostScript canvas item
epsffit(1): fit encapsulated PostScript file (EPSF) into constrained size
error(8): Postfix error/retry mail delivery agent
ettercap(8): multipurpose sniffer/content filter for man in the middle attacks
eukleides(1): Eukleides interpreter to PostScript
euktoeps(1): Eukleides to Encapsulated PostScript converter
evince-previewer(1): show a printing preview of PostScript and PDF documents
evince-thumbnailer(1): create png thumbnails from PostScript and PDF documents
excamera(3): Viewing a 3d world from an arbitrary camera position. Allegro game programming library
explain_fgetpos(3): explain fgetpos(3) errors require_index { }
explain_fgetpos_or_die(3): reposition a stream and report errors require_index { "reposition a stream and report errors" }
explain_fseek_or_die(3): reposition a stream and report errors require_index { "reposition a stream and report errors" }
explain_fseeko_or_die(3): seek to or report file position and report errors require_index { "seek to or report file position and report errors" }
explain_fsetpos(3): explain fsetpos(3) errors require_index { }
explain_fsetpos_or_die(3): reposition a stream and report errors require_index { "reposition a stream and report errors" }
explain_ftell_or_die(3): get stream position and report errors require_index { "get stream position and report errors" }
explain_ftello_or_die(3): get stream position and report errors require_index { "get stream position and report errors" }
explain_lseek_or_die(3): reposition file offset and report errors require_index { "reposition file offset and report errors" }
extcompose(1): Compose a reference to external data for inclusion in a mail message
extractres(1): filter to extract resources from a PostScript document
ezmlm-gate(1): Gate posts depending on message SENDER
ezmlm-store(1): store messages posted to a moderated lists and send moderation requests to the moderator(s)
fax2ps(1): convert a TIFF facsimile to compressed PostScript™
fcft_precompose(3): pre-compose two wide characters into one
fd2ps(1): Translates fdesign output to PostScript Cr n (c) (co
fi_endpoint(3): Fabric endpoint operations fi_endpoint / fi_scalable_ep / fi_passive_ep / fi_close Allocate or close an endpoint. fi_ep_bind Associate an endpoint with hardware resources, such as event queues, completion queues, counters, address vectors, or shared transmit/receive contexts. fi_scalable_ep_bind Associate a scalable endpoint with an address vector fi_pep_bind Associate a passive endpoint with an event queue fi_enable Transitions an active endpoint into an enabled state. fi_cancel Cancel a pending asynchronous data transfer fi_ep_alias Create an alias to the endpoint fi_control Control endpoint operation. fi_getopt / fi_setopt Get or set endpoint options. fi_rx_context / fi_tx_context / fi_srx_context / fi_stx_context Open a transmit or receive context. fi_tc_dscp_set / fi_tc_dscp_get Convert between a DSCP value and a network traffic class fi_rx_size_left / fi_tx_size_left (DEPRECATED) Query the lower bound on how many RX/TX operations may be posted without an operation returning -FI_EAGAIN. This functions have been deprecated and will be removed in a future version of the library
fi_msg(3): Message data transfer operations fi_recv / fi_recvv / fi_recvmsg Post a buffer to receive an incoming message fi_send / fi_sendv / fi_sendmsg fi_inject / fi_senddata : Initiate an operation to send a message
fi_tagged(3): Tagged data transfer operations fi_trecv / fi_trecvv / fi_trecvmsg Post a buffer to receive an incoming message fi_tsend / fi_tsendv / fi_tsendmsg / fi_tinject / fi_tsenddata Initiate an operation to send a message
fig2ps2tex(1): generate a TeX file for including a PostScript file
fixps(1): sanitize PostScript files
fixpspps(1): filter to fix PSPrint PostScript so PSUtils work
flipflop(6): draws a grid of 3D squares that change positions
flpsed(1): annotate PostScript and PDF files
flush(8): Postfix fast flush server
fntsample(1): PDF and PostScript font samples generator " macros SAMPLE . ESAMPLE
gammu-smsd-pgsql(7): gammu-smsd(1) backend using PostgreSQL database server as a message storage rst2man-indent-level 0 1 rstReportMargin $1
gdal-raster-tpi(1): Generate a Topographic Position Index (TPI) map Added in version 3.11
gecs_comp_grp(3): Cosine-Sine (CS) decomposition
gedit(1): a general-purpose text editor
gedmd(3): DMD driver, Dynamic Mode Decomposition
generic(5): Postfix generic table format
geocpset(1): adds control points based on geometric position
geqr_comp4(3): --- positive
getafm(1): create an AFM file for a PostScript font
ggrosciteco.tes(1), grosciteco(1): -- GNU roff post-processor for
gh-browse(1): Open repositories, issues, pull requests, and more in the browser
gh-extension-install(1): Install a gh extension from a repository
gh-issue-list(1): List issues in a repository
gh-issue-transfer(1): Transfer issue to another repository
gh-label-clone(1): Clones labels from one repository to another
gh-label-delete(1): Delete a label from a repository
gh-label-list(1): List labels in a repository
gh-pr-list(1): List pull requests in a repository
gh-project-link(1): Link a project to a repository or a team
gh-project-unlink(1): Unlink a project from a repository or a team
gh-release-list(1): List releases in a repository
gh-repo(1): Manage repositories
gh-repo-archive(1): Archive a repository
gh-repo-autolink-list(1): List autolink references for a GitHub repository
gh-repo-clone(1): Clone a repository locally
gh-repo-create(1): Create a new repository
gh-repo-delete(1): Delete a repository
gh-repo-deploy-key(1): Manage deploy keys in a repository
gh-repo-deploy-key-add(1): Add a deploy key to a GitHub repository
gh-repo-deploy-key-delete(1): Delete a deploy key from a GitHub repository
gh-repo-deploy-key-list(1): List deploy keys in a GitHub repository
gh-repo-edit(1): Edit repository settings
gh-repo-fork(1): Create a fork of a repository
gh-repo-gitignore(1): List and view available repository gitignore templates
gh-repo-gitignore-list(1): List available repository gitignore templates
gh-repo-gitignore-view(1): View an available repository gitignore template
gh-repo-license(1): Explore repository licenses
gh-repo-license-list(1): List common repository licenses
gh-repo-license-view(1): View a specific repository license
gh-repo-list(1): List repositories owned by user or organization
gh-repo-rename(1): Rename a repository
gh-repo-set-default(1): Configure default repository for this directory
gh-repo-sync(1): Sync a repository
gh-repo-unarchive(1): Unarchive a repository
gh-repo-view(1): View a repository
gh-ruleset-list(1): List rulesets for a repository or organization
gh-search(1): Search for repositories, issues, and pull requests
gh-search-repos(1): Search for repositories
gh-status(1): Print information about relevant issues, pull requests, and notifications across repositories
ghq(1): Manage remote repository clones
gi-compile-repository(1): Typelib compiler
git-archimport(1): Import a GNU Arch repository into Git
git-archive-file(1): Export the current HEAD of the git repository to an archive
git-author-stat(1): show commit author statistics of a git repository
git-bulk(1): Run git commands on multiple repositories
git-cat-file(1): Provide contents or details of repository objects
git-clear(1): Rigorously clean up a repository
git-clear-soft(1): Soft clean up a repository
git-clone(1): Clone a repository into a new directory
git-commit(1): Record changes to the repository
git-config(1): Get and set repository or global options
git-daemon(1): A really simple server for Git repositories
git-fetch(1): Download objects and refs from another repository
git-fetch-pack(1): Receive missing objects from another repository
git-filter-repo(1): Rewrite repository history
git-for-each-repo(1): Run a Git command on a list of repositories
git-force-clone(1): overwrite local repositories with clone
git-gc(1): Cleanup unnecessary files and optimize the local repository
git-get(1): Clone a Git repository under a directory
git-http-fetch(1): Download from a remote Git repository via HTTP
git-http-push(1): Push objects over HTTP/DAV to another repository
git-info(1): Returns information on current repository
git-init(1): Create an empty Git repository or reinitialize an existing one
git-init-db(1): Creates an empty Git repository
git-instaweb(1): Instantly browse your working repository in gitweb
git-lfs(1): Work with large files in Git repositories
git-lfs-clone(1): Efficiently clone a LFS-enabled repository
git-lfs-post-checkout(1): Git post-checkout hook implementation
git-lfs-post-commit(1): Git post-commit hook implementation
git-lfs-post-merge(1): Git post-merge hook implementation
git-ls-remote(1): List references in a remote repository
git-maintenance(1): Run tasks to optimize Git repository data
git-merge-base(1): Find as good common ancestors as possible for a merge
git-p4(1): Import from and submit to Perforce repositories
git-pack-refs(1): Pack heads and tags for efficient repository access
git-pull(1): Fetch from and integrate with another repository or a local branch
git-receive-pack(1): Receive what is pushed into the repository
git-release(1): Commit, tag and push changes to the repository
git-remote(1): Manage set of tracked repositories
git-remote-bzr(1): Git remote support for Bazaar repositories
git-repack(1): Pack unpacked objects in a repository
git-replay(1): EXPERIMENTAL: Replay commits on a new base, works with bare repos too
git-repository(5): Git repository format
git-revert-stats(1): show reverting statistics of a git repository
git-secret-init(1): initializes git-secret repository
git-send-pack(1): Push objects over Git protocol to another repository
git-setup(1): Set up a git repository
git-show-ref(1): List references in a local repository
git-ss(1): display a status summary for a Git repository
git-ssnoq(1): display a status summary for files known to a Git repository
git-ssq(1): display the names of files not added to a Git repository
git-subtree(1): Merge subtrees together and split repository into subtrees
git-summary(1): Show repository summary
git-svn(1): Bidirectional operation between a Subversion repository and Git
gitg(1): Git repository viewer
gitk(1): The Git repository browser
gitremote-helpers(7): Helper programs to interact with remote repositories
gitrepository-layout(5): Git Repository Layout
gitsubmodules(7): Mounting one repository inside another
gitup(1): A minimalist, dependency-free program to clone/pull Git repositories
gitweb(1): Git web interface (web frontend to Git repositories)
gl_get_line(3), new_GetLine(3), del_GetLine(3), gl_customize_completion(3), gl_change_terminal(3), gl_configure_getline(3), gl_load_history(3), gl_save_history(3), gl_group_history(3), gl_show_history(3), gl_watch_fd(3), gl_inactivity_timeout(3), gl_terminal_size(3), gl_set_term_size(3), gl_resize_history(3), gl_limit_history(3), gl_clear_history(3), gl_toggle_history(3), gl_lookup_history(3), gl_state_of_history(3), gl_range_of_history(3), gl_size_of_history(3), gl_echo_mode(3), gl_replace_prompt(3), gl_prompt_style(3), gl_ignore_signal(3), gl_trap_signal(3), gl_last_signal(3), gl_completion_action(3), gl_display_text(3), gl_return_status(3), gl_error_message(3), gl_catch_blocked(3), gl_list_signals(3), gl_bind_keyseq(3), gl_erase_terminal(3), gl_automatic_history(3), gl_append_history(3), gl_query_char(3), gl_read_char(3): allow the user to compose an input line
glab-auth-dpop-gen(1): Generates a DPoP (demonstrating-proof-of-possession) proof JWT. (EXPERIMENTAL)
glab-changelog-generate(1): Generate a changelog for the repository or project
glab-label-create(1): Create labels for a repository or project
glab-label-delete(1): Delete labels for a repository or project
glab-label-list(1): List labels in the repository
glab-release-list(1): List releases in a repository
glab-repo(1): Work with GitLab repositories and projects
glab-repo-archive(1): Get an archive of the repository
glab-repo-clone(1): Clone a GitLab repository or project
glab-repo-contributors(1): Get repository contributors list
glab-repo-create(1): Create a new GitLab project/repository
glab-repo-delete(1): Delete an existing repository on GitLab
glab-repo-fork(1): Fork a GitLab repository
glab-repo-list(1): Get list of repositories
glab-repo-mirror(1): Mirror a project or repository to the specified location, using pull or push methods
glab-repo-search(1): Search for GitLab repositories and projects by name
glab-repo-transfer(1): Transfer a repository to a new namespace
glab-repo-update(1): Update an existing GitLab project or repository
glab-repo-view(1): View a project or repository
glutEstablishOverlay(3): establishes an overlay (if possible) for the current window
glutInitWindowPosition(3), glutInitWindowPositionWindowPosition(3), glutInitWindowSize(3): set the initial window position and size respectively
glutPositionWindow(3): requests a change to the position of the current window
glutPostOverlayRedisplay(3), glutPostWindowOverlayRedisplay(3): marks the overlay of the current or specified window as needing to be redisplayed
glutPostRedisplay(3), glutPostWindowRedisplay(3): marks the current or specified window as needing to be redisplayed
glutReportErrors(3): for debugging purposes; prints out OpenGL run-time errors
gmsh(1), Gmsh(1): 3D finite element mesh generator with built-in CAD engine and post-processor
gmx-distance(1): Calculate distances between pairs of positions
gmx-genion(1): Generate monoatomic ions on energetically favorable positions
gmx-genrestr(1): Generate position restraints or distance restraints for index groups
gmx-pairdist(1): Calculate pairwise distances between groups of positions
gmx-xpm2ps(1): Convert XPM (XPixelMap) matrices to postscript or XPM
gnome-2048(6), GNOME 2048(6): Obtain the highest possible tile
gnutls_handshake_set_post_client_hello_function(3): API function
gnutls_x509_crq_get_key_purpose_oid(3): API function
gnutls_x509_crq_set_key_purpose_oid(3): API function
gnutls_x509_crt_check_key_purpose(3): API function
gnutls_x509_crt_get_key_purpose_oid(3): API function
gnutls_x509_crt_set_key_purpose_oid(3): API function
gnutls_x509_ext_export_key_purposes(3): API function
gnutls_x509_ext_import_key_purposes(3): API function
gnutls_x509_key_purpose_deinit(3): API function
gnutls_x509_key_purpose_get(3): API function
gnutls_x509_key_purpose_init(3): API function
gnutls_x509_key_purpose_set(3): API function
gotadmin(1): Game of Trees repository administration
greyfix(8): A greylisting policy daemon for Postfix
grim(1): grab images from a Wayland compositor
grops(1): PostScript driver for groff
grosciteco.tes(1), grosciteco(1): -- GNU roff post-processor for
gs(1): Ghostscript (PostScript and PDF language interpreter and previewer)
gsequencer(1): Advanced Gtk+ Sequencer is an audio sequencer and composition editor
gsnd(1): Run ghostscript (PostScript and PDF engine) without display
gv(1): Postscript and PDF viewer
hatari_profile(1): Post-processor for Hatari profiler data
header_checks(5): Postfix built-in content inspection
hesiod_getmailhost(3), hesiod_free_postoffice(3): Hesiod functions for retrieving user to postoffice mappings
hexstrut(6): a grid of hexagons composed of rotating Y-shaped struts
hikari(1): Wayland Compositor
html2ps(1): convert HTML to PostScript
htmldoc(1): convert html source files into html, postscript, or pdf
http_post(1): do a POST to an HTTP URL
hugo-mod-npm-pack(1): Experimental: Prepares and writes a composite package.json file for your project
hwloc-gather-cpuid(1): Dumps the relevant x86 cpuid values for later (possibly offline) usage
hxtabletrans(1): transpose an HTML or XHTML table
idevicenotificationproxy(1): Post or observe notifications on a device
ikiwiki-comment(1): posts a comment
img-ps(n): Img, Adobe PostScript Format (ps)
imsg_init(3), imsg_read(3), imsg_get(3), imsg_compose(3), imsg_composev(3), imsg_create(3), imsg_add(3), imsg_close(3), imsg_free(3), imsg_flush(3), imsg_clear(3), ibuf_open(3), ibuf_dynamic(3), ibuf_add(3), ibuf_reserve(3), ibuf_seek(3), ibuf_size(3), ibuf_left(3), ibuf_close(3), ibuf_write(3), ibuf_free(3), msgbuf_init(3), msgbuf_clear(3), msgbuf_write(3), msgbuf_drain(3): IPC messaging functions
includeres(1): filter to include resources in a PostScript document
inews(1): post an article to the local news server
initdb(1): create a new PostgreSQL database cluster
initfdpos(3), initFILEpos(3), adjfdpos(3), adjFILEpos(3): file positions indicator handling
injnews(1cn), inews(1cn): `user-friendly' news-posting front-ends for relaynews
ipopd(8), IPOPd(8): Post Office Protocol server
ippevepcl(7), ippevepcl/ps(7): pcl and postscript print commands for ippeveprinter
japropos(1), jwhatis(1): search the Japanese whatis database for strings
jgraph(1): filter for graph plotting to postscript
julius(1): open source multi-purpose LVCSR engine
keychain(1): Manager for ssh-agent, gpg-agent and private keys. Compatible with POSIX systems
krb5_get_init_creds(3), krb5_get_init_creds_keytab(3), krb5_get_init_creds_opt(3), krb5_get_init_creds_opt_alloc(3), krb5_get_init_creds_opt_free(3), krb5_get_init_creds_opt_init(3), krb5_get_init_creds_opt_set_address_list(3), krb5_get_init_creds_opt_set_addressless(3), krb5_get_init_creds_opt_set_anonymous(3), krb5_get_init_creds_opt_set_default_flags(3), krb5_get_init_creds_opt_set_etype_list(3), krb5_get_init_creds_opt_set_forwardable(3), krb5_get_init_creds_opt_set_pa_password(3), krb5_get_init_creds_opt_set_paq_request(3), krb5_get_init_creds_opt_set_preauth_list(3), krb5_get_init_creds_opt_set_proxiable(3), krb5_get_init_creds_opt_set_renew_life(3), krb5_get_init_creds_opt_set_salt(3), krb5_get_init_creds_opt_set_tkt_life(3), krb5_get_init_creds_opt_set_canonicalize(3), krb5_get_init_creds_opt_set_win2k(3), krb5_get_init_creds_password(3), krb5_prompt(3), krb5_prompter_posix(3): Kerberos 5 initial authentication functions
l2p(1): Creates a PostScript file from a symbolic layout file,or from a physical layout file. man1/alc_origin.1
labwc(1): a Wayland stacking compositor
ldap_table(5): Postfix LDAP client configuration
ldapaddgroup(1): adds a POSIX group entry to LDAP
ldapaddmachine(1): adds a POSIX machine (user$) account to LDAP
ldapadduser(1): adds a POSIX user account to LDAP
ldapdeletegroup(1): deletes a POSIX group account from LDAP
ldapdeletemachine(1): deletes a POSIX machine (user$) account from LDAP
ldapdeleteuser(1): deletes a POSIX user account from LDAP
ldapfinger(1): displays a user/machine/group POSIX account's details
ldapmodifygroup(1): modifies a POSIX group account in LDAP interactively
ldapmodifymachine(1): modifies a POSIX machine account in LDAP interactively
ldapmodifyuser(1): modifies a POSIX user account in LDAP interactively
ldaprenamegroup(1): renames a POSIX group in LDAP
ldaprenamemachine(1): renames a POSIX machine account in LDAP
ldaprenameuser(1), _ldaprenameuser(1): renames a POSIX user account in LDAP
ldapscripts(5): Scripts to manage POSIX accounts in your LDAP directory
ldapsetpasswd(1): modifies a POSIX user account's password in LDAP
ldapsetprimarygroup(1): modifies the gidNumber of a POSIX user or machine account in LDAP (sets a user's primary group in LDAP)
ldns_buffer_flip(3), ldns_buffer_rewind(3), ldns_buffer_position(3), ldns_buffer_set_position(3), ldns_buffer_skip(3): buffer positioning
less(1): opposite of more
libcw(3): general purpose Morse code functions library
libowfat_cdb_datapos(3), cdb_datapos(3): get position of data
libowfat_cdb_keypos(3), cdb_keypos(3): get position of key

home | help

Header And Logo

Peripheral Links

Site Navigation

FreeBSD Manual Pages

Header And Logo

Peripheral Links

Search

Site Navigation

FreeBSD Manual Pages