Skip site
navigation (1)Skip section navigation (2)
FreeBSD Manual Pages
- ahc(4)
- Adaptec VL/ISA/PCI SCSI host adapter driver
- ahd(4)
- Adaptec PCI/PCI-X Ultra320 SCSI host adapter driver
- amr(4)
- MegaRAID SCSI/ATA/SATA RAID driver
- bt(4)
- Buslogic/Mylex MultiMaster SCSI host adapter driver
- cd(4)
- SCSI CD-ROM driver
- cd(9)
- CDROM driver for the CAM SCSI subsystem
- cfiscsi(4)
- CAM Target Layer iSCSI target frontend
- ch(4)
- SCSI media-changer (juke box) driver
- ciss(4)
- Common Interface for SCSI-3 Support driver
- csio_build(3), csio_build_visit(3), csio_decode(3), csio_decode_visit(3), buff_decode(3), buff_decode_visit(3), csio_encode(3), csio_encode_visit(3), buff_encode_visit(3)
- CAM user library SCSI buffer parsing routines
- ctl.conf(5)
- CAM Target Layer / iSCSI target daemon configuration file
- ctld(8)
- CAM Target Layer / iSCSI target daemon
- da(4)
- SCSI Direct Access device driver
- esp(4)
- Emulex ESP, NCR 53C9x and QLogic FAS families based SCSI controllers
- isci(4)
- Intel C600 Serial Attached SCSI driver
- iscontrol(8)
- login/negotiator/control for an iSCSI initiator session
- iscsi(4)
- iSCSI initiator
- iscsi.conf(5)
- iSCSI initiator configuration file
- iscsi_initiator(4)
- kernel driver for the iSCSI protocol
- iscsictl(8)
- iSCSI initiator management utility
- iscsid(8)
- iSCSI initiator daemon
- iser(4)
- iSCSI Extensions for RDMA (iSER) driver
- isp(4)
- Qlogic FibreChannel SCSI Host Adapters driver
- ispfw(4)
- Firmware for Qlogic FibreChannel SCSI Host Adapters
- mpr(4)
- LSI Fusion-MPT 3/3.5 IT/IR 12Gb/s Serial Attached SCSI/SATA/PCIe driver
- mps(4)
- LSI Fusion-MPT 2 IT/IR 6Gb/s Serial Attached SCSI/SATA driver
- mpt(4)
- LSI Fusion-MPT SCSI/Fibre Channel driver
- pt(4)
- SCSI processor type driver
- sa(4)
- SCSI Sequential Access device driver
- ses(4)
- SCSI Environmental Services driver
- sesutil(8)
- Utility for managing SCSI Enclosure Services (SES) device
- smartpqi(4)
- Microsemi smartpqi SCSI driver for PQI controllers
- sym(4)
- NCR/Symbios/LSI Logic 53C8XX PCI SCSI host adapter driver
- targ(4)
- SCSI target emulator driver
- virtio_scsi(4)
- VirtIO SCSI driver
- ddpt(8)
- copies data between files and storage devices. Support for devices that understand the SCSI command set
- iscsi-inq(1)
- Utility to request INQUIRY data from an iSCSI LUN
- iscsi-ls(1)
- Utility to list iSCSI targets and LUNs
- iscsi-swp(1)
- Utility to get/set software write protect on an iSCSI LUN
- iscsi-test-cu(1)
- iSCSI/SCSI test suite
- istgt(1)
- iSCSI target
- loaderinfo(1)
- report SCSI tape device info
- mtx(1)
- control SCSI media changer devices
- ocf_heartbeat_LinuxSCSI(7)
- Enables and disables SCSI devices through the kernel SCSI hot-plug subsystem (deprecated)
- ocf_heartbeat_iSCSILogicalUnit(7)
- Manages iSCSI Logical Units (LUs)
- ocf_heartbeat_iSCSITarget(7)
- iSCSI target export agent
- ocf_heartbeat_iscsi(7)
- Manages a local iSCSI initiator and its connections to iSCSI targets
- ocf_heartbeat_mpathpersist(7)
- Manages SCSI persistent reservations on multipath devices
- ocf_heartbeat_scsi2reservation(7)
- scsi-2 reservation
- ocf_heartbeat_sg_persist(7)
- Manages SCSI PERSISTENT RESERVATIONS
- sane-canon(5)
- SANE backend for Canon SCSI scanners
- sane-find-scanner(1)
- find SCSI and USB scanners and their device files
- sane-hs2p(5)
- SANE backend for Ricoh SCSI flatbed/ADF scanners
- sane-ibm(5)
- SANE backend for IBM and Ricoh SCSI flatbed scanners
- sane-kvs20xx(5)
- SANE backend for Panasonic KV-S20xxC USB/SCSI ADF scanners
- sane-kvs40xx(5)
- SANE backend for Panasonic KV-S40xxC USB/SCSI ADF scanners
- sane-microtek2(5)
- SANE backend for Microtek scanners with SCSI-2 command set
- sane-mustek(5)
- SANE backend for Mustek SCSI flatbed scanners (and some other devices)
- sane-pie(5)
- SANE backend for PIE, Devcom and AdLib SCSI flatbed scanners
- sane-scsi(5)
- SCSI adapter tips for scanners
- scsi_mandat(8)
- check SCSI device support for mandatory commands
- scsi_readcap(8)
- do SCSI READ CAPACITY command on disks
- scsi_ready(8)
- do SCSI TEST UNIT READY on devices
- scsi_satl(8)
- check SCSI to ATA Translation (SAT) device support
- scsi_start(8)
- start one or more SCSI disks
- scsi_stop(8)
- stop (spin down) one or more SCSI disks
- scsi_temperature(8)
- fetch the temperature of a SCSI device
- scsieject(1)
- control SCSI tape devices
- scsitape(1)
- control SCSI tape devices
- sdparm(8)
- access SCSI modes pages; read VPD pages; send simple SCSI commands
- sg3_utils(8)
- a package of utilities for sending SCSI commands
- sg_bg_ctl(8)
- send SCSI BACKGROUND CONTROL command
- sg_compare_and_write(8)
- send the SCSI COMPARE AND WRITE command
- sg_decode_sense(8)
- decode SCSI sense and related data
- sg_format(8)
- format, format with preset, resize SCSI disk; format tape
- sg_get_config(8)
- send SCSI GET CONFIGURATION command (MMC-4 +)
- sg_get_elem_status(8)
- send SCSI GET PHYSICAL ELEMENT STATUS command
- sg_get_lba_status(8)
- send SCSI GET LBA STATUS(16 or 32) command
- sg_ident(8)
- send SCSI REPORT/SET IDENTIFYING INFORMATION command
- sg_inq(8)
- issue SCSI INQUIRY command and/or decode its response
- sg_logs(8)
- access log pages with SCSI LOG SENSE command
- sg_luns(8)
- send SCSI REPORT LUNS command or decode given LUN
- sg_modes(8)
- reads mode pages with SCSI MODE SENSE command
- sg_opcodes(8)
- report supported SCSI commands or task management functions
- sg_persist(8)
- use SCSI PERSISTENT RESERVE command to access registrations and reservations
- sg_prevent(8)
- send SCSI PREVENT ALLOW MEDIUM REMOVAL command
- sg_raw(8)
- send arbitrary SCSI or NVMe command to a device
- sg_rdac(8)
- display or modify SCSI RDAC Redundant Controller mode page
- sg_read_attr(8)
- send SCSI READ ATTRIBUTE command
- sg_read_block_limits(8)
- send SCSI READ BLOCK LIMITS command
- sg_read_buffer(8)
- send SCSI READ BUFFER command
- sg_read_long(8)
- send a SCSI READ LONG command
- sg_readcap(8)
- send SCSI READ CAPACITY command
- sg_reassign(8)
- send SCSI REASSIGN BLOCKS command
- sg_referrals(8)
- send SCSI REPORT REFERRALS command
- sg_rep_pip(8)
- send SCSI REPORT PROVISIONING INITIALIZATION PATTERN command
- sg_rep_zones(8)
- send SCSI REPORT ZONES, REALMS or ZONE DOMAINS command
- sg_requests(8)
- send one or more SCSI REQUEST SENSE commands
- sg_reset_wp(8)
- send SCSI RESET WRITE POINTER command
- sg_rmsn(8)
- send SCSI READ MEDIA SERIAL NUMBER command
- sg_rtpg(8)
- send SCSI REPORT TARGET PORT GROUPS command
- sg_safte(8)
- access SCSI Accessed Fault-Tolerant Enclosure (SAF-TE) device
- sg_sanitize(8)
- remove all user data from disk with SCSI SANITIZE command
- sg_sat_identify(8)
- send ATA IDENTIFY DEVICE command via SCSI to ATA Translation (SAT) layer
- sg_sat_read_gplog(8)
- use ATA READ LOG EXT command via a SCSI to ATA Translation (SAT) layer
- sg_sat_set_features(8)
- use ATA SET FEATURES command via a SCSI to ATA Translation (SAT) layer
- sg_seek(8)
- send SCSI SEEK, PRE-FETCH(10) or PRE-FETCH(16) command
- sg_senddiag(8)
- performs a SCSI SEND DIAGNOSTIC command
- sg_ses(8)
- access a SCSI Enclosure Services (SES) device
- sg_ses_microcode(8)
- send microcode to a SCSI enclosure
- sg_start(8)
- send SCSI START STOP UNIT command: start, stop, load or eject medium
- sg_stpg(8)
- send SCSI SET TARGET PORT GROUPS command
- sg_stream_ctl(8)
- send SCSI STREAM CONTROL or GET STREAM STATUS command
- sg_sync(8)
- send SCSI SYNCHRONIZE CACHE command
- sg_timestamp(8)
- report or set timestamp on SCSI device
- sg_turs(8)
- send one or more SCSI TEST UNIT READY commands
- sg_unmap(8)
- send SCSI UNMAP command (known as 'trim' in ATA specs)
- sg_verify(8)
- invoke SCSI VERIFY command(s) on a block device
- sg_vpd(8)
- fetch SCSI VPD page and/or decode its response
- sg_wr_mode(8)
- write (modify) SCSI mode page
- sg_write_buffer(8)
- send SCSI WRITE BUFFER commands
- sg_write_long(8)
- send SCSI WRITE LONG command
- sg_write_same(8)
- send SCSI WRITE SAME command
- sg_write_verify(8), sg_write_and_verify(8)
- send the SCSI WRITE AND VERIFY command
- sg_write_x(8)
- SCSI WRITE normal/ATOMIC/SAME/SCATTERED/STREAM, ORWRITE commands
- sg_zone(8)
- send a SCSI ZONE modifying command
- spindown(1)
- SCSI/firewire harddrive spindown daemon
- tapeinfo(1)
- report SCSI tape device info
- tosha(1)
- read CD digital audio and video data via SCSI
- Paws::StorageGateway::CreateCachediSCSIVolume(3)
- Arguments for method CreateCachediSCSIVolume on Paws::StorageGateway
- Paws::StorageGateway::CreateStorediSCSIVolume(3)
- Arguments for method CreateStorediSCSIVolume on Paws::StorageGateway
- Paws::StorageGateway::DescribeCachediSCSIVolumes(3)
- Arguments for method DescribeCachediSCSIVolumes on Paws::StorageGateway
- Paws::StorageGateway::DescribeStorediSCSIVolumes(3)
- Arguments for method DescribeStorediSCSIVolumes on Paws::StorageGateway
- bscrypto(8)
- Bareos's 'SCSI Crypto'
- rscsi(1)
- remote generic SCSI transport protocol server
- scgskeleton(1)
- Skeleton program for SCSI transport using libscg
- sformat(8)
- SCSI disk formatting/partitioning/analysis/repair utility
