Skip site
navigation (1)Skip section navigation (2)
FreeBSD Manual Pages
- cap_syslog(3), cap_vsyslog(3), cap_openlog(3), cap_closelog(3), cap_setlogmask(3)
- library for syslog in capability mode
- newsyslog(8)
- maintain system log files to manageable sizes
- newsyslog.conf(5)
- newsyslog(8) configuration file
- openpam_log(3)
- log a message through syslog
- syslog(3), vsyslog(3), openlog(3), closelog(3), setlogmask(3)
- control system log
- syslog.conf(5)
- syslogd(8) configuration file
- syslogd(8)
- log systems messages
- xo_set_syslog_enterprise_id(3)
- Set the enterprise identifier for syslog content
- xo_syslog(3), xo_vsyslog(3), xo_open_log(3), xo_close_log(3), xo_set_logmask(3)
- create SYSLOG (RFC5424) log records using libxo formatting
- courierlogger(1)
- Courier syslog wrapper
- ha_logger(1)
- Log a message to files and/or syslog through the HA Logging Daemon
- idevicesyslog(1)
- Relay syslog of a connected device
- im_bsd(8), BSD input module(8)
- syslogd(8) input module used to log BSD kernel messages
- im_file(8), FILE input module(8)
- syslogd(8) input module for reading files and pipes
- im_tcp(8), tcp input module(8)
- syslogd(8) input module used to receive from tcp connections
- im_udp(8), UDP input module(8)
- syslogd(8) input module for UDP network logging
- im_unix(8), UNIX input module(8)
- syslogd(8) input module for unix system logging
- ipmievd(8)
- IPMI event daemon for sending events to syslog
- loggen(1)
- Generate syslog messages at a specified rate
- logtool(1)
- parse and filter syslog files
- metalog(8)
- an alternative syslog daemon
- minirsyslogd(8)
- highly efficient, minimalistic, remote-only syslog receiver
- ocf_heartbeat_rsyslog(7)
- rsyslog resource agent
- ocf_heartbeat_syslog-ng(7)
- Syslog-ng resource agent
- om_classic(8), classic output module(8)
- syslogd(8) output module for output to files, users or other hosts (UDP)
- om_peo(8), peo output module(8)
- syslogd(8) output module used to protect log files
- om_regex(8), msyslog regex output module(8)
- syslogd(8) output module used to filter and redirect logs
- om_tcp(8), msyslog tcp(8)
- output module syslogd(8) output module used to forward messages to remote hosts through TCP
- om_udp(8), msyslog udp(8)
- output module syslogd(8) output module used to forward messages to remote hosts through UDP
- pam_log(8)
- log messages to syslog
- pdbtool(1)
- An application to test and convert syslog-ng pattern database rules
- respond(1)
- automate response actions for events that are reported by a logging system (such as syslog)
- rsyslog.conf(5)
- rsyslogd(8) configuration file
- rsyslogd(8)
- reliable and extended syslogd
- sissylog(8)
- log stdin to syslog (3)
- slogencrypt(1)
- Encrypt existing plain text log files using the syslog-ng secure logging environment
- slogkey(1)
- Manage cryptographic keys for use with syslog-ng secure logging
- socklog(8)
- small and secure syslogd replacement for use with runit
- syslog(n)
- send message to syslog from Tcl script
- syslog-ng(8)
- syslog-ng system logger application
- syslog-ng-ctl(1)
- Display message statistics and enable verbose, debug and trace modes in
- syslog-ng-debun(1)
- syslog-ng DEBUg buNdle generator
- syslog-ng.conf(5)
- syslog-ng configuration file
- syslog.conf(5)
- syslogd(8) configuration file
- syslogd(8), -(8)
- modular syslog daemon log systems messages
- syslogtocern(8)
- convert thttpd syslog entries into CERN Common Log format
- xo_set_syslog_enterprise_id(3)
- Set the enterprise identifier for syslog content
- xo_syslog(3), xo_vsyslog(3), xo_open_log(3), xo_close_log(3), xo_set_logmask(3)
- create SYSLOG (RFC5424) log records using libxo formatting
- Dancer::Logger::Syslog(3)
- Dancer logger engine for Sys::Syslog
- Device::Modem::Log::Syslog(3)
- Syslog logging plugin for Device::Modem class
- Log::Agent::Channel::Syslog(3)
- syslog logging channel for Log::Agent::Logger
- Log::Agent::Driver::Syslog(3)
- syslog logging driver for Log::Agent
- Log::Agent::Priorities(3)
- conversion between syslog priorities and levels
- Log::Any::Adapter::Syslog(3)
- Send Log::Any logs to syslog
- Log::Dispatch::Syslog(3)
- Object for logging to system log
- Log::Log4perl::JavaMap::SyslogAppender(3), Log::Log4perl::JavaMap::SysLogAppender(3)
- wraps Log::Dispatch::Syslog
- Log::Report::Dispatcher::Syslog(3)
- send messages to syslog
- Log::Syslog::Constants(3)
- Perl extension containing syslog priority constants as defined in RFC3164
- Log::Syslog::Fast(3)
- Perl extension for sending syslog messages over TCP, UDP, or UNIX sockets with minimal CPU overhead
- Log::Syslog::Fast::PP(3)
- XS-free, API-compatible version of Log::Syslog::Fast
- Log::Syslog::Fast::Simple(3)
- Wrapper around Log::Syslog::Fast that adds some flexibility at the expense of additional runtime overhead
- Mail::SpamAssassin::Logger::Syslog(3)
- log to syslog
- Net::DRI::Logging::Syslog(3)
- SYSLOG Logging Operations for Net::DRI
- Net::Server::Log::Sys::Syslog(3)
- log via Syslog
- Net::Syslog(3)
- Perl extension for sending syslog messages directly to a remote syslogd
- No::Worries::Syslog(3)
- syslog handling without worries
- Paranoid::Log::Syslog(3)
- Log Facility Syslog
- Parse::Syslog(3)
- Parse Unix syslog files
- Parse::Syslog::Mail(3)
- Parse mailer logs from syslog
- Razor2::Syslog(3)
- -- Syslog support for Razor2
- Sys::Syslog(3)
- Perl interface to the UNIX syslog(3) calls
- SyslogScan::ByGroup(3)
- -- Organizes a Summary of mail statistics into Groups of related e-mail users
- SyslogScan::Delivery(3)
- encapsulates a logged, successful delivery of mail from a sender to a list of recipients
- SyslogScan::DeliveryIterator(3)
- -- scans a syslog file for "deliveries", successful transfers of mail to mailboxes or to other machines
- SyslogScan::SendmailLine(3)
- -- Enhances basic SyslogEntry parsing by understanding sendmail to/from message syntax
- SyslogScan::SendmailLineFrom(3)
- -- encapsulates a 'From:' line in a syslog file
- SyslogScan::SendmailLineTo(3)
- -- encapsulates a 'To:' line in a syslog file
- SyslogScan::SendmailUtil(3), SendmailUtil.pm(3)
- -- utilities for sendmail packages
- SyslogScan::Summary(3)
- -- encapsulates a tally of how many bytes people have sent and received through sendmail
- SyslogScan::SyslogEntry(3)
- -- parses generic lines in syslog files
- SyslogScan::Usage(3)
- -- encapsulates the total volumes of mail broadcast, sent, and received through sendmail by a single user or group. SyslogScan::Volume -- encapsulates a number of messages along with a total number of bytes
- SyslogScan::WhereIs(3), SyslogScan::WhereIs::guess(3)
- -- return full path of syslog file where mail messages are logged
- Tie::Syslog(3)
- Tie a filehandle to Syslog
- Unix::Syslog(3)
- Perl interface to the UNIX syslog(3) calls
- syslog(3), sysfatal(3)
- system error messages
- tstatd(1)
- Logs real-time accounting daemon SYNOPSIS tstatd [ options ] plugin [zone1:]wildcard1 .. [zoneN:]wildcardN OPTIONS "-a zone, --agregate-zone=zone" 4 Item "-a zone, --agregate-zone=zone" Agregate data from all anonymous logs (wildcards without explicit zone specified) into zone. Default behavior is to create new zone for each anonymous log from its file name. "-b file, --database-file=file" 4 Item "-b file, --database-file=file" Use file as persistent storage to keep accumulated data across daemon restarts. Default is auto generated from daemon name, specified identity and '.db' suffix. "--basename" 4 Item "--basename" Use only base name (excluding directories and suffix) of anonymous log file for auto-created zones. "-c dir, --change-dir=dir" 4 Item "-c dir, --change-dir=dir" Change current directory to dir before wildcards expanding. "-d, --debug" 4 Item "-d, --debug" Composition of options: --foreground and --log-level=debug. "-f, --foreground" 4 Item "-f, --foreground" Don't detach daemon from control terminal, logging to stderr instead log file or syslog. "--log-facility=name" 4 Item "--log-facility=name" Use name as facility for syslog logging (see syslog (3) for list of available values). Default is 'daemon'. "--log-level=level" 4 Item "--log-level=level" Set minimal logging level to level (see syslog (3) for list of available values). Default is 'notice'. "--log-file=file" 4 Item "--log-file=file" Use logging to file instead of syslog logging (which is default). "-e num, --expand-period=num" 4 Item "-e num, --expand-period=num" Do wildcards re-expanding and checking for new and missed logs every num seconds. Default is '60'. "-h, --help" 4 Item "-h, --help" Print brief help message about available options. "-i string, --identity=string" 4 Item "-i string, --identity=string" Just a string used in title of daemon process, syslog ident (see syslog|(3)), --database-file and --pid-file. Idea behind this options - multiple tstatd instances running simultaneosly. "-l [address:]port, --listen=[address:]port" 4 Item "-l [address:]port, --listen=[address:]port" Specify address and port for TCP listen socket binding. Default is '127.0.0.1:3638'. "--multiple" 4 Item "--multiple" With this option specified same log file could be included into several zones (if log name satisifies several wildcards). Default behavior is to include log file only in first satisified zone. "-n num, --windows-num=num" 4 Item "-n num, --windows-num=num" Set number of sliding-windows to num. Default is '60'. "-o string, --options=string" 4 Item "-o string, --options=string" Comma-separated plugin supported options (like a mount (8) options). "--override-from=file" 4 Item "--override-from=file" Load content of file into plugin package namespace. This is way to easy customize plugin behavior without creating another plugin. "-p file, --pid-file=file" 4 Item "-p file, --pid-file=file" Use file to keep daemon process id. Default is auto generated from daemon name, specified identity and '.pid' suffix. "--parse-error=level" 4 Item "--parse-error=level" Do logging with level (see syslog (3) for available values) about all unparsed log lines. Hint: use 'none' for ignoring such lines. Default is defining by plugin and usually is 'debug'. "-r pattern, --regex=pattern" 4 Item "-r pattern, --regex=pattern" Use pattern instead of plugin default regular expression for matching log lines. "--regex-from=file" 4 Item "--regex-from=file" Load regular expression from file and use instead of plugin default regular expression for matching log lines. "-s num, --store-period=num" 4 Item "-s num, --store-period=num" Store accumulated data in a persistent storage every num seconds. Default is '60'. "--timer=zone:timer:num" 4 Item "--timer=zone:timer:num" Create named timer firing every num seconds for zone. "-u <user>, --user=user" 4 Item "-u <user>, --user=user" Change effective privileges of daemon process to user. "-v, --version" 4 Item "-v, --version" Print version information of tstatd and exit. "-w num, --window-size=<num>" 4 Item "-w num, --window-size=<num>" Set size (duration) of sliding window to num seconds. Default is '10'
