Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
sbuf(9), sbuf_new(9), sbuf_new_auto(9), sbuf_new_for_sysctl(9), sbuf_clear(9), sbuf_get_flags(9), sbuf_set_flags(9), sbuf_clear_flags(9), sbuf_setpos(9), sbuf_bcat(9), sbuf_bcopyin(9), sbuf_bcpy(9), sbuf_cat(9), sbuf_copyin(9), sbuf_cpy(9), sbuf_nl_terminate(9), sbuf_printf(9), sbuf_vprintf(9), sbuf_putc(9), sbuf_set_drain(9), sbuf_trim(9), sbuf_error(9), sbuf_finish(9), sbuf_data(9), sbuf_len(9), sbuf_done(9), sbuf_delete(9), sbuf_start_section(9), sbuf_end_section(9), sbuf_hexdump(9), sbuf_printf_drain(9), sbuf_putbuf(9)
safe string composition
setbuf(3), setbuffer(3), setlinebuf(3), setvbuf(3)
stream buffering operations
TPMLIB_SetBufferSize(3), TPMLIB_SetBufferSize (3)
Set the TPMs I/O buffer size
TclZipfs_AppHook.tcl90(3), TclZipfs_AppHook(3), TclZipfs_Mount(3), TclZipfs_MountBuffer(3), TclZipfs_Unmount(3)
handle ZIP files as Tcl virtual filesystems
Tcl_AllocStatBuf.tcl86(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3)
procedures to interact with any filesystem
Tcl_AllocStatBuf.tcl90(3), Tcl_FSRegister(3), Tcl_FSUnregister(3), Tcl_FSData(3), Tcl_FSMountsChanged(3), Tcl_FSGetFileSystemForPath(3), Tcl_FSGetPathType(3), Tcl_FSCopyFile(3), Tcl_FSCopyDirectory(3), Tcl_FSCreateDirectory(3), Tcl_FSDeleteFile(3), Tcl_FSRemoveDirectory(3), Tcl_FSRenameFile(3), Tcl_FSListVolumes(3), Tcl_FSEvalFile(3), Tcl_FSEvalFileEx(3), Tcl_FSLoadFile(3), Tcl_FSUnloadFile(3), Tcl_FSMatchInDirectory(3), Tcl_FSLink(3), Tcl_FSLstat(3), Tcl_FSUtime(3), Tcl_FSFileAttrsGet(3), Tcl_FSFileAttrsSet(3), Tcl_FSFileAttrStrings(3), Tcl_FSStat(3), Tcl_FSAccess(3), Tcl_FSOpenFileChannel(3), Tcl_FSGetCwd(3), Tcl_FSChdir(3), Tcl_FSPathSeparator(3), Tcl_FSJoinPath(3), Tcl_FSSplitPath(3), Tcl_FSEqualPaths(3), Tcl_FSGetNormalizedPath(3), Tcl_FSJoinToPath(3), Tcl_FSConvertToPathType(3), Tcl_FSGetInternalRep(3), Tcl_FSGetTranslatedPath(3), Tcl_FSGetTranslatedStringPath(3), Tcl_FSNewNativePath(3), Tcl_FSGetNativePath(3), Tcl_FSFileSystemInfo(3), Tcl_GetAccessTimeFromStat(3), Tcl_GetBlockSizeFromStat(3), Tcl_GetBlocksFromStat(3), Tcl_GetChangeTimeFromStat(3), Tcl_GetDeviceTypeFromStat(3), Tcl_GetFSDeviceFromStat(3), Tcl_GetFSInodeFromStat(3), Tcl_GetGroupIdFromStat(3), Tcl_GetLinkCountFromStat(3), Tcl_GetModeFromStat(3), Tcl_GetModificationTimeFromStat(3), Tcl_GetSizeFromStat(3), Tcl_GetUserIdFromStat(3), Tcl_AllocStatBuf(3), Tcl_FSTildeExpand(3)
procedures to interact with any filesystem
Tcl_Close.tcl86(3), Tcl_OpenFileChannel(3), Tcl_OpenCommandChannel(3), Tcl_MakeFileChannel(3), Tcl_GetChannel(3), Tcl_GetChannelNames(3), Tcl_GetChannelNamesEx(3), Tcl_RegisterChannel(3), Tcl_UnregisterChannel(3), Tcl_DetachChannel(3), Tcl_IsStandardChannel(3), Tcl_Close(3), Tcl_CloseEx(3), Tcl_ReadChars(3), Tcl_Read(3), Tcl_GetsObj(3), Tcl_Gets(3), Tcl_WriteObj(3), Tcl_WriteChars(3), Tcl_Write(3), Tcl_Flush(3), Tcl_Seek(3), Tcl_Tell(3), Tcl_TruncateChannel(3), Tcl_GetChannelOption(3), Tcl_SetChannelOption(3), Tcl_Eof(3), Tcl_InputBlocked(3), Tcl_InputBuffered(3), Tcl_OutputBuffered(3), Tcl_Ungets(3), Tcl_ReadRaw(3), Tcl_WriteRaw(3)
buffered I/O facilities using channels
Tcl_Close.tcl90(3), Tcl_OpenFileChannel(3), Tcl_OpenCommandChannel(3), Tcl_MakeFileChannel(3), Tcl_GetChannel(3), Tcl_GetChannelNames(3), Tcl_GetChannelNamesEx(3), Tcl_RegisterChannel(3), Tcl_UnregisterChannel(3), Tcl_DetachChannel(3), Tcl_IsStandardChannel(3), Tcl_Close(3), Tcl_CloseEx(3), Tcl_ReadChars(3), Tcl_Read(3), Tcl_GetsObj(3), Tcl_Gets(3), Tcl_WriteObj(3), Tcl_WriteChars(3), Tcl_Write(3), Tcl_Flush(3), Tcl_Seek(3), Tcl_Tell(3), Tcl_TruncateChannel(3), Tcl_GetChannelOption(3), Tcl_SetChannelOption(3), Tcl_Eof(3), Tcl_InputBlocked(3), Tcl_InputBuffered(3), Tcl_OutputBuffered(3), Tcl_Ungets(3), Tcl_ReadRaw(3), Tcl_WriteRaw(3)
buffered I/O facilities using channels
WildMidi_ConvertBufferToMidi(3)
Convert a MIDI-like buffer into a new MIDI buffer
XmbufQueryExtension(3), XmbufGetVersion(3), XmbufCreateBuffers(3), XmbufDestroyBuffers(3), XmbufDisplayBuffers(3), XmbufGetWindowAttributes(3), XmbufChangeWindowAttributes(3), XmbufGetBufferAttributes(3), XmbufChangeBufferAttributes(3), XmbufGetScreenInfo(3), XmbufCreateStereoWindow(3)
X multibuffering functions
autocutsel(1)
keep the X clipboard and the cutbuffer in sync
cutbuffer(n)
Manipulate X cut buffer properties
cutsel(1)
show information about the X clipboard and the cutbuffer in sync
explain_setbuf(3)
explain setbuf(3) errors require_index { }
explain_setbuf_or_die(3)
set stream buffer and report errors require_index { "set stream buffer and report errors" }
explain_setbuffer(3)
explain setbuffer(3) errors require_index { }
explain_setbuffer_or_die(3)
stream buffering operations and report errors require_index { "stream buffering operations and report errors" }
glSelectBuffer(3), "glSelectBuffer(3)
establish a buffer for selection mode values
home | help