Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
atp(4)
Apple touchpad driver
hconf(4)
MS Windows Precision Touchpad configuration driver
hmt(4)
MS Windows 7/8/10 - compatible HID multi-touch device driver
slk_init(3), slk_set(3), slk_wset(3), slk_refresh(3), slk_noutrefresh(3), slk_label(3), slk_clear(3), slk_restore(3), slk_touch(3), slk_attron(3), slk_attrset(3), slk_attroff(3), slk_attr_on(3), slk_attr_set(3), slk_attr_off(3), slk_attr(3), slk_color(3), extended_slk_color(3)
curses soft label routines
terasic_mtl(4)
driver for the Terasic/Cambridge Multi-Touch LCD device
touch(1)
change file access and modification times
touchwin(3), touchline(3), untouchwin(3), wtouchln(3), is_linetouched(3), is_wintouched(3)
curses refresh control routines
uep(4)
eGalax touchscreen driver
wmt(4)
MS Windows 7/8/10 - compatible USB HID multi-touch device driver
wsp(4)
Wellspring touchpad driver
ALLEGRO_TOUCH_INPUT(3)
Allegro 5 API
ALLEGRO_TOUCH_INPUT_MAX_TOUCH_COUNT(3)
Allegro 5 API
ALLEGRO_TOUCH_INPUT_STATE(3)
Allegro 5 API
ALLEGRO_TOUCH_STATE(3)
Allegro 5 API
XIGrabButton(3), XIUngrabButton(3), XIGrabKeycode(3), XIUngrabKeycode(3), XIGrabTouchBegin(3), XIUngrabTouchBegin(3), XIGrabPinchGestureBegin(3), XIUngrabPinchGestureBegin(3), XIGrabSwipeGestureBegin(3)
grab/ungrab buttons or keys
al_get_haptic_from_touch_input(3)
Allegro 5 API
al_get_touch_input_event_source(3)
Allegro 5 API
al_get_touch_input_mouse_emulation_event_source(3)
Allegro 5 API
al_get_touch_input_state(3)
Allegro 5 API
al_install_touch_input(3)
Allegro 5 API
al_is_touch_input_haptic(3)
Allegro 5 API
al_is_touch_input_installed(3)
Allegro 5 API
al_uninstall_touch_input(3)
Allegro 5 API
audial(1)
generate or recognize touch tones for North American telephones
egalax(4x)
eGalax touch screen input driver
git-merge-tree(1)
Perform merge without touching index or working tree
git-touch(1)
Touch and add file to the index
gtouch(1), touch(1)
change file timestamps
klavaro(1), Klavaro(1)
Flexible touch typing tutor using GTK+3
ktouch(1)
A typing tutor by KDE
libinput-analyze-per-slot-delta(1)
analyze the per-event delta movement for touch slots
libinput-analyze-touch-down-state(1)
analyze the touch states
libinput-measure-touch-size(1)
measure touch size and orientation of devices
libinput-measure-touchpad-pressure(1)
measure pressure properties of devices
libinput-measure-touchpad-size(1)
measure the size of a touchpad
libinput-measure-touchpad-tap(1)
measure tap-to-click properties of devices
lockfile_create(3), lockfile_remove(3), lockfile_touch(3), lockfile_check(3)
manage lockfiles
maillock(3), mailunlock(3), touchlock(3)
manage mailbox lockfiles
memcached_touch(3)
libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1
memcached_touch_by_key(3)
libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1
memtouch(1)
libmemcached Documentation rst2man-indent-level 0 1 rstReportMargin \$1
slk_init(3x), slk_set(3x), slk_wset(3x), slk_refresh(3x), slk_noutrefresh(3x), slk_label(3x), slk_clear(3x), slk_restore(3x), slk_touch(3x), slk_attron(3x), slk_attrset(3x), slk_attroff(3x), slk_attr_on(3x), slk_attr_set(3x), slk_attr_off(3x), slk_attr(3x), slk_color(3x), extended_slk_color(3x)
curses soft label routines
synaptics(4x)
touchpad input driver
syndaemon(1)
a program that monitors keyboard activity and disables the touchpad when the keyboard is being used
text2tt(1)
Convert text to Touch Tone representation
touchwin(3x), touchline(3x), untouchwin(3x), wtouchln(3x), is_linetouched(3x), is_wintouched(3x)
curses refresh control routines
tt2text(1)
Convert Touch Tone sequence to text
vmtouch(8)
the Virtual Memory Toucher
File::Touch(3)
update file access and modification times, optionally creating files if needed
Jifty::Manual::Style(3)
Jifty coding style guide Default style Subsection "Default style" When in doubt, default to whatever Damian Conway's Perl Best Practices says. Private documentation Subsection "Private documentation" When documenting a private method, or providing documentation which is not useful to the user of the module (and is presumably useful to the developer), wrap it in =begin/end private. This way it does not show up in perldoc where a user would see it and yet is still available and well formatted (that is, not just a lump comment) when looking at the code. =begin private =head2 import_extra Called by L<Test::More>s C<import> code when L<Jifty::Test> is first C<use>d, it calls L</setup>, and asks Test::More to export its symbols to the namespace that C<use>d this one. =end private sub import_extra { ... } Test temp files Subsection "Test temp files" Files created by tests should be declared as such using Jifty::Test->test_file() so they are cleaned up on a successful test run. Use Shell::Command Subsection "Use Shell::Command" Shell::Command has a number of functions which work like common shell file commands such as touch, cp and mv. They are battle tested and cross-platform. Use them instead of coding your own. For example, instead of this: open my $file, ">foo"; close $file; Do this: use Shell::Command; touch $file; Case insensitive matching Subsection "Case insensitive matching" To check if a string equals another string case insensitively, do this lc $foo eq lc $bar; lc $foo eq bar; not this: $foo =~ /^eQ$bareE/i; $foo =~ /^bar$/i;
fido_dev_get_touch_begin(3), fido_dev_get_touch_status(3)
asynchronously wait for touch on a FIDO2 authenticator
kitty.conf(5)
kitty.conf Documentation kitty is highly customizable, everything from keyboard shortcuts, to rendering frames-per-second. See below for an overview of all customization possibilities. You can open the config file within kitty by pressing %ctrl+shift+f2 (⌘+, on macOS). A kitty.conf with commented default configurations and descriptions will be created if the file does not exist. You can reload the config file within kitty by pressing %ctrl+shift+f5 (⌃+⌘+, on macOS) or sending kitty the SIGUSR1 signal. You can also display the current configuration by pressing %ctrl+shift+f6 (⌥+⌘+, on macOS). kitty looks for a config file in the OS config directories (usually ~/.config/kitty/kitty.conf) but you can pass a specific path via the %kitty --config option or use the %KITTY_CONFIG_DIRECTORY environment variable. See %kitty --config for full details. Comments can be added to the config file as lines starting with the # character. This works only if the # character is the first character in the line. You can include secondary config files via the include directive. If you use a relative path for include, it is resolved with respect to the location of the current config file. Note that environment variables are expanded, so ${USER}.conf becomes name.conf if USER=name. Also, you can use globinclude to include files matching a shell glob pattern and envinclude to include configuration from environment variables. For example: 0.0 3.5 C include other.conf # Include *.conf files from all subdirs of kitty.d inside the kitty config dir globinclude kitty.d/**/*.conf # Include the *contents* of all env vars starting with KITTY_CONF_ envinclude KITTY_CONF_* P NOTE: 0.0 3.5 Syntax highlighting for kitty.conf in vim is available via %vim-kitty. kitty has very powerful font management. You can configure individual font faces and even specify special fonts for particular characters. 0.0 font_family, bold_font, italic_font, bold_italic_font 0.0 3.5 C font_family monospace bold_font auto italic_font auto bold_italic_font auto P You can specify different fonts for the bold/italic/bold-italic variants. To get a full list of supported fonts use the kitty +list-fonts command. By default they are derived automatically, by the OSes font system. When %bold_font or %bold_italic_font is set to auto on macOS, the priority of bold fonts is semi-bold, bold, heavy. Setting them manually is useful for font families that have many weight variants like Book, Medium, Thick, etc. For example: 0.0 3.5 C font_family Operator Mono Book bold_font Operator Mono Medium italic_font Operator Mono Book Italic bold_italic_font Operator Mono Medium Italic P 0.0 font_size 0.0 3.5 C font_size 11.0 P Font size (in pts) 0.0 force_ltr 0.0 3.5 C force_ltr no P kitty does not support BIDI (bidirectional text), however, for RTL scripts, words are automatically displayed in RTL. That is to say, in an RTL script, the words (dqHELLO WORLD(dq display in kitty as (dqWORLD HELLO(dq, and if you try to select a substring of an RTL-shaped string, you will get the character that would be there had the the string been LTR. For example, assuming the Hebrew word ירושלים, selecting the character that on the screen appears to be ם actually writes into the selection buffer the character י. kitty(aqs default behavior is useful in conjunction with a filter to reverse the word order, however, if you wish to manipulate RTL glyphs, it can be very challenging to work with, so this option is provided to turn it off. Furthermore, this option can be used with the command line program %GNU FriBidi to get BIDI support, because it will force kitty to always treat the text as LTR, which FriBidi expects for terminals. 0.0 symbol_map 0.0 3.5 C symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols P Map the specified Unicode codepoints to a particular font. Useful if you need special rendering for some symbols, such as for Powerline. Avoids the need for patched fonts. Each Unicode code point is specified in the form U+<code point in hexadecimal>. You can specify multiple code points, separated by commas and ranges separated by hyphens. This option can be specified multiple times. The syntax is: 0.0 3.5 C symbol_map codepoints Font Family Name P 0.0 narrow_symbols 0.0 3.5 C narrow_symbols U+E0A0-U+E0A3,U+E0C0-U+E0C7 1 P Usually, for Private Use Unicode characters and some symbol/dingbat characters, if the character is followed by one or more spaces, kitty will use those extra cells to render the character larger, if the character in the font has a wide aspect ratio. Using this option you can force kitty to restrict the specified code points to render in the specified number of cells (defaulting to one cell). This option can be specified multiple times. The syntax is: 0.0 3.5 C narrow_symbols codepoints [optionally the number of cells] P 0.0 disable_ligatures 0.0 3.5 C disable_ligatures never P Choose how you want to handle multi-character ligatures. The default is to always render them. You can tell kitty to not render them when the cursor is over them by using cursor to make editing easier, or have kitty never render them at all by using always, if you don(aqt like them. The ligature strategy can be set per-window either using the kitty remote control facility or by defining shortcuts for it in kitty.conf, for example: 0.0 3.5 C map alt+1 disable_ligatures_in active always map alt+2 disable_ligatures_in all never map alt+3 disable_ligatures_in tab cursor P Note that this refers to programming ligatures, typically implemented using the calt OpenType feature. For disabling general ligatures, use the %font_features option. 0.0 font_features 0.0 3.5 C font_features none P Choose exactly which OpenType features to enable or disable. This is useful as some fonts might have features worthwhile in a terminal. For example, Fira Code includes a discretionary feature, zero, which in that font changes the appearance of the zero (0), to make it more easily distinguishable from Ø. Fira Code also includes other discretionary features known as Stylistic Sets which have the tags ss01 through ss20. For the exact syntax to use for individual features, see the %HarfBuzz documentation. Note that this code is indexed by PostScript name, and not the font family. This allows you to define very precise feature settings; e.g. you can disable a feature in the italic font but not in the regular font. On Linux, font features are first read from the FontConfig database and then this option is applied, so they can be configured in a single, central place. To get the PostScript name for a font, use kitty +list-fonts --psnames: 0.0 3.5 C $ kitty +list-fonts --psnames | grep Fira Fira Code Fira Code Bold (FiraCode-Bold) Fira Code Light (FiraCode-Light) Fira Code Medium (FiraCode-Medium) Fira Code Regular (FiraCode-Regular) Fira Code Retina (FiraCode-Retina) P The part in brackets is the PostScript name. Enable alternate zero and oldstyle numerals: 0.0 3.5 C font_features FiraCode-Retina +zero +onum P Enable only alternate zero in the bold font: 0.0 3.5 C font_features FiraCode-Bold +zero P Disable the normal ligatures, but keep the calt feature which (in this font) breaks up monotony: 0.0 3.5 C font_features TT2020StyleB-Regular -liga +calt P In conjunction with %force_ltr, you may want to disable Arabic shaping entirely, and only look at their isolated forms if they show up in a document. You can do this with e.g.: 0.0 3.5 C font_features UnifontMedium +isol -medi -fina -init P 0.0 modify_font 0.0 3.5 C modify_font P Modify font characteristics such as the position or thickness of the underline and strikethrough. The modifications can have the suffix px for pixels or % for percentage of original value. No suffix means use pts. For example: 0.0 3.5 C modify_font underline_position -2 modify_font underline_thickness 150% modify_font strikethrough_position 2px P Additionally, you can modify the size of the cell in which each font glyph is rendered and the baseline at which the glyph is placed in the cell. For example: 0.0 3.5 C modify_font cell_width 80% modify_font cell_height -2px modify_font baseline 3 P Note that modifying the baseline will automatically adjust the underline and strikethrough positions by the same amount. Increasing the baseline raises glyphs inside the cell and decreasing it lowers them. Decreasing the cell size might cause rendering artifacts, so use with care. 0.0 box_drawing_scale 0.0 3.5 C box_drawing_scale 0.001, 1, 1.5, 2 P The sizes of the lines used for the box drawing Unicode characters. These values are in pts. They will be scaled by the monitor DPI to arrive at a pixel value. There must be four values corresponding to thin, normal, thick, and very thick lines. 0.0 cursor 0.0 3.5 C cursor #cccccc P Default cursor color. If set to the special value none the cursor will be rendered with a (dqreverse video(dq effect. It(aqs color will be the color of the text in the cell it is over and the text will be rendered with the background color of the cell. Note that if the program running in the terminal sets a cursor color, this takes precedence. Also, the cursor colors are modified if the cell background and foreground colors have very low contrast. 0.0 cursor_text_color 0.0 3.5 C cursor_text_color #111111 P The color of text under the cursor. If you want it rendered with the background color of the cell underneath instead, use the special keyword: background. Note that if %cursor is set to none then this option is ignored. 0.0 cursor_shape 0.0 3.5 C cursor_shape block P The cursor shape can be one of block, beam, underline. Note that when reloading the config this will be changed only if the cursor shape has not been set by the program running in the terminal. This sets the default cursor shape, applications running in the terminal can override it. In particular, %shell integration in kitty sets the cursor shape to beam at shell prompts. You can avoid this by setting %shell_integration to no-cursor. 0.0 cursor_beam_thickness 0.0 3.5 C cursor_beam_thickness 1.5 P The thickness of the beam cursor (in pts). 0.0 cursor_underline_thickness 0.0 3.5 C cursor_underline_thickness 2.0 P The thickness of the underline cursor (in pts). 0.0 cursor_blink_interval 0.0 3.5 C cursor_blink_interval -1 P The interval to blink the cursor (in seconds). Set to zero to disable blinking. Negative values mean use system default. Note that the minimum interval will be limited to %repaint_delay. 0.0 cursor_stop_blinking_after 0.0 3.5 C cursor_stop_blinking_after 15.0 P Stop blinking cursor after the specified number of seconds of keyboard inactivity. Set to zero to never stop blinking. 0.0 scrollback_lines 0.0 3.5 C scrollback_lines 2000 P Number of lines of history to keep in memory for scrolling back. Memory is allocated on demand. Negative numbers are (effectively) infinite scrollback. Note that using very large scrollback is not recommended as it can slow down performance of the terminal and also use large amounts of RAM. Instead, consider using %scrollback_pager_history_size. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_pager 0.0 3.5 C scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER P Program with which to view scrollback in a new window. The scrollback buffer is passed as STDIN to this program. If you change it, make sure the program you use can handle ANSI escape sequences for colors and text formatting. INPUT_LINE_NUMBER in the command line above will be replaced by an integer representing which line should be at the top of the screen. Similarly CURSOR_LINE and CURSOR_COLUMN will be replaced by the current cursor position or set to 0 if there is no cursor, for example, when showing the last command output. 0.0 scrollback_pager_history_size 0.0 3.5 C scrollback_pager_history_size 0 P Separate scrollback history size (in MB), used only for browsing the scrollback buffer with pager. This separate buffer is not available for interactive scrolling but will be piped to the pager program when viewing scrollback buffer in a separate window. The current implementation stores the data in UTF-8, so approximatively 10000 lines per megabyte at 100 chars per line, for pure ASCII, unformatted text. A value of zero or less disables this feature. The maximum allowed size is 4GB. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_fill_enlarged_window 0.0 3.5 C scrollback_fill_enlarged_window no P Fill new space with lines from the scrollback buffer after enlarging a window. 0.0 wheel_scroll_multiplier 0.0 3.5 C wheel_scroll_multiplier 5.0 P Multiplier for the number of lines scrolled by the mouse wheel. Note that this is only used for low precision scrolling devices, not for high precision scrolling devices on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. See also %wheel_scroll_min_lines. 0.0 wheel_scroll_min_lines 0.0 3.5 C wheel_scroll_min_lines 1 P The minimum number of lines scrolled by the mouse wheel. The %scroll multiplier only takes effect after it reaches this number. Note that this is only used for low precision scrolling devices like wheel mice that scroll by very small amounts when using the wheel. With a negative number, the minimum number of lines will always be added. 0.0 touch_scroll_multiplier 0.0 3.5 C touch_scroll_multiplier 1.0 P Multiplier for the number of lines scrolled by a touchpad. Note that this is only used for high precision scrolling devices on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 mouse_hide_wait 0.0 3.5 C mouse_hide_wait 3.0 P Hide mouse cursor after the specified number of seconds of the mouse not being used. Set to zero to disable mouse cursor hiding. Set to a negative value to hide the mouse cursor immediately when typing text. Disabled by default on macOS as getting it to work robustly with the ever-changing sea of bugs that is Cocoa is too much effort. 0.0 url_color, url_style 0.0 3.5 C url_color #0087bd url_style curly P The color and style for highlighting URLs on mouse-over. %url_style can be one of: none, straight, double, curly, dotted, dashed. 0.0 open_url_with 0.0 3.5 C open_url_with default P The program to open clicked URLs. The special value default with first look for any URL handlers defined via the %Scripting the mouse click facility and if non are found, it will use the Operating System(aqs default URL handler (open on macOS and xdg-open on Linux). 0.0 url_prefixes 0.0 3.5 C url_prefixes file ftp ftps gemini git gopher http https irc ircs kitty mailto news sftp ssh P The set of URL prefixes to look for when detecting a URL under the mouse cursor. 0.0 detect_urls 0.0 3.5 C detect_urls yes P Detect URLs under the mouse. Detected URLs are highlighted with an underline and the mouse cursor becomes a hand over them. Even if this option is disabled, URLs are still clickable. 0.0 url_excluded_characters 0.0 3.5 C url_excluded_characters P Additional characters to be disallowed from URLs, when detecting URLs under the mouse cursor. By default, all characters that are legal in URLs are allowed. 0.0 copy_on_select 0.0 3.5 C copy_on_select no P Copy to clipboard or a private buffer on select. With this set to clipboard, selecting text with the mouse will cause the text to be copied to clipboard. Useful on platforms such as macOS that do not have the concept of primary selection. You can instead specify a name such as a1 to copy to a private kitty buffer. Map a shortcut with the paste_from_buffer action to paste from this private buffer. For example: 0.0 3.5 C copy_on_select a1 map shift+cmd+v paste_from_buffer a1 P Note that copying to the clipboard is a security risk, as all programs, including websites open in your browser can read the contents of the system clipboard. 0.0 paste_actions 0.0 3.5 C paste_actions quote-urls-at-prompt P A comma separated list of actions to take when pasting text into the terminal. The supported paste actions are: 0.0 quote-urls-at-prompt: If the text being pasted is a URL and the cursor is at a shell prompt, automatically quote the URL (needs %shell_integration). confirm: Confirm the paste if bracketed paste mode is not active or there is more a large amount of text being pasted. filter: Run the filter_paste() function from the file paste-actions.py in the kitty config directory on the pasted text. The text returned by the function will be actually pasted. 0.0 strip_trailing_spaces 0.0 3.5 C strip_trailing_spaces never P Remove spaces at the end of lines when copying to clipboard. A value of smart will do it when using normal selections, but not rectangle selections. A value of always will always do it. 0.0 select_by_word_characters 0.0 3.5 C select_by_word_characters @-./_~?&=%+# P Characters considered part of a word when double clicking. In addition to these characters any character that is marked as an alphanumeric character in the Unicode database will be matched. 0.0 select_by_word_characters_forward 0.0 3.5 C select_by_word_characters_forward P Characters considered part of a word when extending the selection forward on double clicking. In addition to these characters any character that is marked as an alphanumeric character in the Unicode database will be matched. If empty (default) %select_by_word_characters will be used for both directions. 0.0 click_interval 0.0 3.5 C click_interval -1.0 P The interval between successive clicks to detect double/triple clicks (in seconds). Negative numbers will use the system default instead, if available, or fallback to 0.5. 0.0 focus_follows_mouse 0.0 3.5 C focus_follows_mouse no P Set the active window to the window under the mouse when moving the mouse around. 0.0 pointer_shape_when_grabbed 0.0 3.5 C pointer_shape_when_grabbed arrow P The shape of the mouse pointer when the program running in the terminal grabs the mouse. Valid values are: arrow, beam and hand. 0.0 default_pointer_shape 0.0 3.5 C default_pointer_shape beam P The default shape of the mouse pointer. Valid values are: arrow, beam and hand. 0.0 pointer_shape_when_dragging 0.0 3.5 C pointer_shape_when_dragging beam P The default shape of the mouse pointer when dragging across text. Valid values are: arrow, beam and hand
touch(1)
set modification date of a file
ts.conf(5)
Configuration file for tslib, controlling touch screens for embedded devices
ts_calibrate(1)
A test program to calibrate a touch screen used by tslib
ts_close(3)
close a touch screen input device
ts_close_restricted(3)
use a custom function for closing the touchscreen's input device file
ts_fd(3)
get the file descriptor to a touchscreen device
ts_finddev(1)
Discover touch screen devices
ts_get_eventpath(3)
get the path to the currently opened touchscreen device file
ts_harvest(1)
Harvest hundreds of raw touch screen coordinates
ts_open(3)
open a touch screen input device
ts_open_restricted(3)
use a custom function for opening the touchscreen's input device file
ts_print_mt(1)
A very basic multitouch test routine for tslib
ts_read(3), ts_read_raw(3), ts_read_mt(3), ts_read_raw_mt(3)
read tslib touch samples
ts_setup(3)
find, open and configure a touch screen input device
ts_test_mt(1)
A basic multitouch test program for tslib
home | help