FreeBSD Manual Pages

home | help

BUS_READ_IVAR(9), BUS_WRITE_IVAR(9): manipulate bus-specific device instance variables
VOP_BWRITE(9): write a file system buffer
VOP_GETPAGES(9), VOP_PUTPAGES(9): read or write VM pages from a file
VOP_READ(9), VOP_WRITE(9): read or write a file
VOP_STRATEGY(9): read or write a file system buffer
aio_write(2), aio_writev(2): asynchronous write to a file (REALTIME)
alq(9), alq_open_flags(9), alq_open(9), alq_writen(9), alq_write(9), alq_flush(9), alq_close(9), alq_getn(9), alq_get(9), alq_post_flags(9), alq_post(9): Asynchronous Logging Queues
archive_write(3): functions for creating archives
archive_write_add_filter_b64encode(3), archive_write_add_filter_by_name(3), archive_write_add_filter_bzip2(3), archive_write_add_filter_compress(3), archive_write_add_filter_grzip(3), archive_write_add_filter_gzip(3), archive_write_add_filter_lrzip(3), archive_write_add_filter_lz4(3), archive_write_add_filter_lzip(3), archive_write_add_filter_lzma(3), archive_write_add_filter_lzop(3), archive_write_add_filter_none(3), archive_write_add_filter_program(3), archive_write_add_filter_uuencode(3), archive_write_add_filter_xz(3), archive_write_add_filter_zstd(3): functions enabling output filters
archive_write_data(3), archive_write_data_block(3): functions for creating archives
archive_write_disk_new(3), archive_write_disk_set_options(3), archive_write_disk_set_skip_file(3), archive_write_disk_set_group_lookup(3), archive_write_disk_set_standard_lookup(3), archive_write_disk_set_user_lookup(3): functions for creating objects on disk
archive_write_fail(3), archive_write_close(3), archive_write_finish(3), archive_write_free(3): functions for creating archives
archive_write_finish_entry(3): functions for creating archives
archive_write_get_bytes_per_block(3), archive_write_set_bytes_per_block(3), archive_write_get_bytes_in_last_block(3), archive_write_set_bytes_in_last_block(3): functions for creating archives
archive_write_header(3): functions for creating archives
archive_write_new(3): functions for creating archives
archive_write_open(3), archive_write_open2(3), archive_write_open_fd(3), archive_write_open_FILE(3), archive_write_open_filename(3), archive_write_open_memory(3): functions for creating archives
archive_write_set_filter_option(3), archive_write_set_format_option(3), archive_write_set_option(3), archive_write_set_options(3): functions controlling options for writing archives
archive_write_set_format(3), archive_write_set_format_7zip(3), archive_write_set_format_ar(3), archive_write_set_format_ar_bsd(3), archive_write_set_format_ar_svr4(3), archive_write_set_format_by_name(3), archive_write_set_format_cpio(3), archive_write_set_format_cpio_bin(3), archive_write_set_format_cpio_newc(3), archive_write_set_format_cpio_odc(3), archive_write_set_format_cpio_pwb(3), archive_write_set_format_filter_by_ext(3), archive_write_set_format_filter_by_ext_def(3), archive_write_set_format_gnutar(3), archive_write_set_format_iso9660(3), archive_write_set_format_mtree(3), archive_write_set_format_mtree_classic(3), archive_write_set_format_mtree_default(3), archive_write_set_format_pax(3), archive_write_set_format_pax_restricted(3), archive_write_set_format_raw(3), archive_write_set_format_shar(3), archive_write_set_format_shar_dump(3), archive_write_set_format_ustar(3), archive_write_set_format_v7tar(3), archive_write_set_format_warc(3), archive_write_set_format_xar(3), archive_write_set_format_zip(3): functions for creating archives
atf-c(3), ATF_CHECK(3), ATF_CHECK_MSG(3), ATF_CHECK_EQ(3), ATF_CHECK_EQ_MSG(3), ATF_CHECK_MATCH(3), ATF_CHECK_MATCH_MSG(3), ATF_CHECK_STREQ(3), ATF_CHECK_STREQ_MSG(3), ATF_CHECK_ERRNO(3), ATF_REQUIRE(3), ATF_REQUIRE_MSG(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_EQ_MSG(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_MATCH_MSG(3), ATF_REQUIRE_STREQ(3), ATF_REQUIRE_STREQ_MSG(3), ATF_REQUIRE_ERRNO(3), ATF_TC(3), ATF_TC_BODY(3), ATF_TC_BODY_NAME(3), ATF_TC_CLEANUP(3), ATF_TC_CLEANUP_NAME(3), ATF_TC_HEAD(3), ATF_TC_HEAD_NAME(3), ATF_TC_NAME(3), ATF_TC_WITH_CLEANUP(3), ATF_TC_WITHOUT_HEAD(3), ATF_TP_ADD_TC(3), ATF_TP_ADD_TCS(3), atf_tc_get_config_var(3), atf_tc_get_config_var_wd(3), atf_tc_get_config_var_as_bool(3), atf_tc_get_config_var_as_bool_wd(3), atf_tc_get_config_var_as_long(3), atf_tc_get_config_var_as_long_wd(3), atf_no_error(3), atf_tc_expect_death(3), atf_tc_expect_exit(3), atf_tc_expect_fail(3), atf_tc_expect_pass(3), atf_tc_expect_signal(3), atf_tc_expect_timeout(3), atf_tc_fail(3), atf_tc_fail_nonfatal(3), atf_tc_pass(3), atf_tc_skip(3), atf_utils_cat_file(3), atf_utils_compare_file(3), atf_utils_copy_file(3), atf_utils_create_file(3), atf_utils_file_exists(3), atf_utils_fork(3), atf_utils_free_charpp(3), atf_utils_grep_file(3), atf_utils_grep_string(3), atf_utils_readline(3), atf_utils_redirect(3), atf_utils_wait(3): C API to write ATF-based test programs
atf-c++(3), ATF_ADD_TEST_CASE(3), ATF_CHECK_ERRNO(3), ATF_FAIL(3), ATF_INIT_TEST_CASES(3), ATF_PASS(3), ATF_REQUIRE(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_ERRNO(3), ATF_REQUIRE_IN(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_NOT_IN(3), ATF_REQUIRE_THROW(3), ATF_REQUIRE_THROW_RE(3), ATF_SKIP(3), ATF_TEST_CASE(3), ATF_TEST_CASE_BODY(3), ATF_TEST_CASE_CLEANUP(3), ATF_TEST_CASE_HEAD(3), ATF_TEST_CASE_NAME(3), ATF_TEST_CASE_USE(3), ATF_TEST_CASE_WITH_CLEANUP(3), ATF_TEST_CASE_WITHOUT_HEAD(3), atf::utils::cat_file(3), atf::utils::compare_file(3), atf::utils::copy_file(3), atf::utils::create_file(3), atf::utils::file_exists(3), atf::utils::fork(3), atf::utils::grep_collection(3), atf::utils::grep_file(3), atf::utils::grep_string(3), atf::utils::redirect(3), atf::utils::wait(3): C++ API to write ATF-based test programs
atf_add_test_case(3), atf_check(3), atf_check_equal(3), atf_check_not_equal(3), atf_config_get(3), atf_config_has(3), atf_expect_death(3), atf_expect_exit(3), atf_expect_fail(3), atf_expect_pass(3), atf_expect_signal(3), atf_expect_timeout(3), atf_fail(3), atf_get(3), atf_get_srcdir(3), atf_init_test_cases(3), atf_pass(3), atf_require_prog(3), atf_set(3), atf_skip(3), atf_test_case(3): POSIX shell API to write ATF-based test programs
au_close(3), au_close_buffer(3), au_close_token(3), au_open(3), au_write(3): create and commit audit records
bread(3), bwrite(3): read and write blocks of a UFS file system
bsdlabel(8): read and write BSD label
bus_generic_read_ivar(9), bus_generic_write_ivar(9): generic implementation of BUS_READ_IVAR and BUS_WRITE_IVAR for buses
bus_space(9), bus_space_barrier(9), bus_space_copy_region_1(9), bus_space_copy_region_2(9), bus_space_copy_region_4(9), bus_space_copy_region_8(9), bus_space_copy_region_stream_1(9), bus_space_copy_region_stream_2(9), bus_space_copy_region_stream_4(9), bus_space_copy_region_stream_8(9), bus_space_free(9), bus_space_map(9), bus_space_peek_1(9), bus_space_peek_2(9), bus_space_peek_4(9), bus_space_peek_8(9), bus_space_poke_1(9), bus_space_poke_2(9), bus_space_poke_4(9), bus_space_poke_8(9), bus_space_read_1(9), bus_space_read_2(9), bus_space_read_4(9), bus_space_read_8(9), bus_space_read_multi_1(9), bus_space_read_multi_2(9), bus_space_read_multi_4(9), bus_space_read_multi_8(9), bus_space_read_multi_stream_1(9), bus_space_read_multi_stream_2(9), bus_space_read_multi_stream_4(9), bus_space_read_multi_stream_8(9), bus_space_read_region_1(9), bus_space_read_region_2(9), bus_space_read_region_4(9), bus_space_read_region_8(9), bus_space_read_region_stream_1(9), bus_space_read_region_stream_2(9), bus_space_read_region_stream_4(9), bus_space_read_region_stream_8(9), bus_space_read_stream_1(9), bus_space_read_stream_2(9), bus_space_read_stream_4(9), bus_space_read_stream_8(9), bus_space_set_multi_1(9), bus_space_set_multi_2(9), bus_space_set_multi_4(9), bus_space_set_multi_8(9), bus_space_set_multi_stream_1(9), bus_space_set_multi_stream_2(9), bus_space_set_multi_stream_4(9), bus_space_set_multi_stream_8(9), bus_space_set_region_1(9), bus_space_set_region_2(9), bus_space_set_region_4(9), bus_space_set_region_8(9), bus_space_set_region_stream_1(9), bus_space_set_region_stream_2(9), bus_space_set_region_stream_4(9), bus_space_set_region_stream_8(9), bus_space_subregion(9), bus_space_unmap(9), bus_space_write_1(9), bus_space_write_2(9), bus_space_write_4(9), bus_space_write_8(9), bus_space_write_multi_1(9), bus_space_write_multi_2(9), bus_space_write_multi_4(9), bus_space_write_multi_8(9), bus_space_write_multi_stream_1(9), bus_space_write_multi_stream_2(9), bus_space_write_multi_stream_4(9), bus_space_write_multi_stream_8(9), bus_space_write_region_1(9), bus_space_write_region_2(9), bus_space_write_region_4(9), bus_space_write_region_8(9), bus_space_write_region_stream_1(9), bus_space_write_region_stream_2(9), bus_space_write_region_stream_4(9), bus_space_write_region_stream_8(9), bus_space_write_stream_1(9), bus_space_write_stream_2(9), bus_space_write_stream_4(9), bus_space_write_stream_8(9): bus space manipulation functions
bzero(3), explicit_bzero(3): write zeroes to a byte string
cgget(3), cgput(3), cgread(3), cgread1(3), cgwrite(3), cgwrite1(3): read/write cylinder groups of UFS disks
echo(1): write arguments to the standard output
fdwrite(1): format and write floppy disks
fifolog_create(1), fifolog_writer(1), fifolog_reader(1): initialize, write, seek and extract data from a fifolog
fread(3), fread_unlocked(3), fwrite(3), fwrite_unlocked(3): binary stream input/output
g_read_data(9), g_write_data(9): read/write data from/to GEOM consumer
kvm_read(3), kvm_read2(3), kvm_write(3): read or write kernel virtual memory
lseek(2): reposition read/write file offset
memset(3): write a byte to byte string
overlay(3), overwrite(3), copywin(3): overlay and manipulate overlapped curses windows
owll(9), owll OWLL_WRITE_ONE(9), OWLL_WRITE_ZERO(9), OWLL_READ_DATA(9), OWLL_REASET_AND_PRESENCE(9): Dallas Semiconductor 1-Wire Link Layer Interface
pax(1): read and write file archives and copy directory hierarchies
pcap_dump(3): write a packet to a capture file
pcap_dump_open(3), pcap_dump_fopen(3): open a file to which to write packets
pci(9), pci_alloc_msi(9), pci_alloc_msix(9), pci_disable_busmaster(9), pci_disable_io(9), pci_enable_busmaster(9), pci_enable_io(9), pci_find_bsf(9), pci_find_cap(9), pci_find_dbsf(9), pci_find_device(9), pci_find_extcap(9), pci_find_htcap(9), pci_find_next_cap(9), pci_find_next_extcap(9), pci_find_next_htcap(9), pci_find_pcie_root_port(9), pci_get_id(9), pci_get_max_payload(9), pci_get_max_read_req(9), pci_get_powerstate(9), pci_get_vpd_ident(9), pci_get_vpd_readonly(9), pci_iov_attach(9), pci_iov_attach_name(9), pci_iov_detach(9), pci_msi_count(9), pci_msix_count(9), pci_msix_pba_bar(9), pci_msix_table_bar(9), pci_pending_msix(9), pci_read_config(9), pci_release_msi(9), pci_remap_msix(9), pci_restore_state(9), pci_save_state(9), pci_set_max_read_req(9), pci_set_powerstate(9), pci_write_config(9), pcie_adjust_config(9), pcie_flr(9), pcie_get_max_completion_timeout(9), pcie_read_config(9), pcie_wait_for_pending_transactions(9), pcie_write_config(9): PCI bus interface
pidfile_open(3), pidfile_write(3), pidfile_close(3), pidfile_remove(3): library for PID files handling
pmc_configure_logfile(3), pmc_flush_logfile(3), pmc_writelog(3), pmc_close_logfile(3): log file management
pmc_read(3), pmc_rw(3), pmc_write(3): read and write hardware performance counters
post_form(3), unpost_form(3): write or erase forms from associated subwindows
post_menu(3), unpost_menu(3): write or erase menus from associated subwindows
proc_rwmem(9), proc_readmem(9), proc_writemem(9): read from or write to a process address space
pthread_rwlock_destroy(3): destroy a read/write lock
pthread_rwlock_init(3): initialize a read/write lock
pthread_rwlock_rdlock(3), pthread_rwlock_tryrdlock(3): acquire a read/write lock for reading
pthread_rwlock_timedrdlock(3): acquire a read-write lock for reading or give up after a specified period
pthread_rwlock_timedwrlock(3): acquire a read-write lock for writing or give up after a specified period
pthread_rwlock_unlock(3): release a read/write lock
pthread_rwlock_wrlock(3), pthread_rwlock_trywrlock(3): acquire a read/write lock for writing
pthread_rwlockattr_destroy(3): destroy a read/write lock
pthread_rwlockattr_init(3): initialize a read/write lock
quota_close(3), quota_open quota_close quota_on quota_off quota_read quota_write_limits quota_write_usage quota_fsname quota_qfname quota_maxid quota_check_path quota_convert(3): Manipulate quotas
rdma_get_send_comp(3): retrieves a completed send, read, or write request
rdma_post_write(3): post an RDMA write work request
rdma_post_writev(3): post an RDMA write work request
rdma_reg_write(3): register data buffer(s) for remote RDMA write access
rmlock(9), rm_init(9), rm_init_flags(9), rm_destroy(9), rm_rlock(9), rm_try_rlock(9), rm_wlock(9), rm_runlock(9), rm_wunlock(9), rm_wowned(9), rm_sleep(9), rm_assert(9), RM_SYSINIT(9), RM_SYSINIT_FLAGS(9), rms_init(9), rms_destroy(9), rms_rlock(9), rms_wlock(9), rms_runlock(9), rms_wunlock(9): kernel reader/writer lock optimized for read-mostly access patterns
rpc.rwalld(8): write messages to users currently logged in server
rwlock(9), rw_init(9), rw_init_flags(9), rw_destroy(9), rw_rlock(9), rw_wlock(9), rw_runlock(9), rw_wunlock(9), rw_unlock(9), rw_try_rlock(9), rw_try_upgrade(9), rw_try_wlock(9), rw_downgrade(9), rw_sleep(9), rw_initialized(9), rw_wowned(9), rw_assert(9), RW_SYSINIT(9), RW_SYSINIT_FLAGS(9): kernel reader/writer lock
sbget(3), sbput(3), sbread(3), sbwrite(3): read and write superblocks of a UFS file system
scr_dump(3), scr_restore(3), scr_init(3), scr_set(3): read (write) a curses screen from (to) a file
seqc_consistent(9), seqc_read(9), seqc_write_begin(9), seqc_write_end(9): lockless read algorithm
sigfastblock(2): controls signals blocking with a simple memory write
superio(9), superio_devid(9), superio_dev_disable(9), superio_dev_enable(9), superio_dev_enabled(9), superio_find_dev(9), superio_get_dma(9), superio_get_iobase(9), superio_get_irq(9), superio_get_ldn(9), superio_get_type(9), superio_read(9), superio_revid(9), superio_vendor(9), superio_write(9): Super I/O bus interface
sync(8): force completion of pending disk writes (flush cache)
ufs_disk_close(3), ufs_disk_fillout(3), ufs_disk_fillout_blank(3), ufs_disk_write(3): open and close userland UFS disks
wall(1): write a message to users
write(1): send a message to another user
write(2), writev(2), pwrite(2), pwritev(2): write output
xo_set_writer(3): set custom writer functions for a libxo handle
zpool-initialize(8): write to unallocated regions of ZFS storage pool
BIO_get_buffer_num_lines(3), BIO_set_read_buffer_size(3), BIO_set_write_buffer_size(3), BIO_set_buffer_size(3), BIO_set_buffer_read_data(3), BIO_f_buffer(3): buffering BIO
BIO_get_new_index(3), BIO_meth_new(3), BIO_meth_free(3), BIO_meth_get_read_ex(3), BIO_meth_set_read_ex(3), BIO_meth_get_write_ex(3), BIO_meth_set_write_ex(3), BIO_meth_get_write(3), BIO_meth_set_write(3), BIO_meth_get_read(3), BIO_meth_set_read(3), BIO_meth_get_puts(3), BIO_meth_set_puts(3), BIO_meth_get_gets(3), BIO_meth_set_gets(3), BIO_meth_get_ctrl(3), BIO_meth_set_ctrl(3), BIO_meth_get_create(3), BIO_meth_set_create(3), BIO_meth_get_destroy(3), BIO_meth_set_destroy(3), BIO_meth_get_callback_ctrl(3), BIO_meth_set_callback_ctrl(3): Routines to build up BIO methods
BIO_read_ex(3), BIO_write_ex(3), BIO_read(3), BIO_write(3), BIO_gets(3), BIO_puts(3): BIO I/O functions
BIO_s_bio(3), BIO_make_bio_pair(3), BIO_destroy_bio_pair(3), BIO_shutdown_wr(3), BIO_set_write_buf_size(3), BIO_get_write_buf_size(3), BIO_new_bio_pair(3), BIO_get_write_guarantee(3), BIO_ctrl_get_write_guarantee(3), BIO_get_read_request(3), BIO_ctrl_get_read_request(3), BIO_ctrl_reset_read_request(3): BIO pair BIO
BIO_s_file(3), BIO_new_file(3), BIO_new_fp(3), BIO_set_fp(3), BIO_get_fp(3), BIO_read_filename(3), BIO_write_filename(3), BIO_append_filename(3), BIO_rw_filename(3): FILE bio
BIO_should_read(3), BIO_should_write(3), BIO_should_io_special(3), BIO_retry_type(3), BIO_should_retry(3), BIO_get_retry_BIO(3), BIO_get_retry_reason(3), BIO_set_retry_reason(3): BIO retry functions
CRYPTO_THREAD_run_once(3), CRYPTO_THREAD_lock_new(3), CRYPTO_THREAD_read_lock(3), CRYPTO_THREAD_write_lock(3), CRYPTO_THREAD_unlock(3), CRYPTO_THREAD_lock_free(3), CRYPTO_atomic_add(3): OpenSSL thread support
DECLARE_PEM_rw(3), PEM_read_CMS(3), PEM_read_bio_CMS(3), PEM_write_CMS(3), PEM_write_bio_CMS(3), PEM_write_DHxparams(3), PEM_write_bio_DHxparams(3), PEM_read_ECPKParameters(3), PEM_read_bio_ECPKParameters(3), PEM_write_ECPKParameters(3), PEM_write_bio_ECPKParameters(3), PEM_read_ECPrivateKey(3), PEM_write_ECPrivateKey(3), PEM_write_bio_ECPrivateKey(3), PEM_read_EC_PUBKEY(3), PEM_read_bio_EC_PUBKEY(3), PEM_write_EC_PUBKEY(3), PEM_write_bio_EC_PUBKEY(3), PEM_read_NETSCAPE_CERT_SEQUENCE(3), PEM_read_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_write_NETSCAPE_CERT_SEQUENCE(3), PEM_write_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_read_PKCS8(3), PEM_read_bio_PKCS8(3), PEM_write_PKCS8(3), PEM_write_bio_PKCS8(3), PEM_write_PKCS8_PRIV_KEY_INFO(3), PEM_read_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_PKCS8_PRIV_KEY_INFO(3), PEM_write_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_SSL_SESSION(3), PEM_read_bio_SSL_SESSION(3), PEM_write_SSL_SESSION(3), PEM_write_bio_SSL_SESSION(3): PEM object encoding routines
PEM_write(3), PEM_write_bio(3), PEM_read(3), PEM_read_bio(3), PEM_do_header(3), PEM_get_EVP_CIPHER_INFO(3): PEM encoding routines
PEM_write_bio_CMS_stream(3): output CMS_ContentInfo structure in PEM format
PEM_write_bio_PKCS7_stream(3): output PKCS7 structure in PEM format
RAND_load_file(3), RAND_write_file(3), RAND_file_name(3): PRNG seed file
SMIME_write_CMS(3): convert CMS structure to S/MIME format
SMIME_write_PKCS7(3): convert PKCS#7 structure to S/MIME format
SSL_set_max_early_data(3), SSL_CTX_set_max_early_data(3), SSL_get_max_early_data(3), SSL_CTX_get_max_early_data(3), SSL_set_recv_max_early_data(3), SSL_CTX_set_recv_max_early_data(3), SSL_get_recv_max_early_data(3), SSL_CTX_get_recv_max_early_data(3), SSL_SESSION_get_max_early_data(3), SSL_SESSION_set_max_early_data(3), SSL_write_early_data(3), SSL_read_early_data(3), SSL_get_early_data_status(3), SSL_allow_early_data_cb_fn(3), SSL_CTX_set_allow_early_data_cb(3), SSL_set_allow_early_data_cb(3): functions for sending and receiving early data
SSL_want(3), SSL_want_nothing(3), SSL_want_read(3), SSL_want_write(3), SSL_want_x509_lookup(3), SSL_want_async(3), SSL_want_async_job(3), SSL_want_client_hello_cb(3): obtain state information TLS/SSL I/O operation
SSL_write_ex(3), SSL_write(3), SSL_sendfile(3): write bytes to a TLS/SSL connection
UI_METHOD(3), UI_create_method(3), UI_destroy_method(3), UI_method_set_opener(3), UI_method_set_writer(3), UI_method_set_flusher(3), UI_method_set_reader(3), UI_method_set_closer(3), UI_method_set_data_duplicator(3), UI_method_set_prompt_constructor(3), UI_method_set_ex_data(3), UI_method_get_opener(3), UI_method_get_writer(3), UI_method_get_flusher(3), UI_method_get_reader(3), UI_method_get_closer(3), UI_method_get_data_duplicator(3), UI_method_get_data_destructor(3), UI_method_get_prompt_constructor(3), UI_method_get_ex_data(3): user interface method creation and destruction
pem_password_cb(3), PEM_read_bio_PrivateKey(3), PEM_read_PrivateKey(3), PEM_write_bio_PrivateKey(3), PEM_write_bio_PrivateKey_traditional(3), PEM_write_PrivateKey(3), PEM_write_bio_PKCS8PrivateKey(3), PEM_write_PKCS8PrivateKey(3), PEM_write_bio_PKCS8PrivateKey_nid(3), PEM_write_PKCS8PrivateKey_nid(3), PEM_read_bio_PUBKEY(3), PEM_read_PUBKEY(3), PEM_write_bio_PUBKEY(3), PEM_write_PUBKEY(3), PEM_read_bio_RSAPrivateKey(3), PEM_read_RSAPrivateKey(3), PEM_write_bio_RSAPrivateKey(3), PEM_write_RSAPrivateKey(3), PEM_read_bio_RSAPublicKey(3), PEM_read_RSAPublicKey(3), PEM_write_bio_RSAPublicKey(3), PEM_write_RSAPublicKey(3), PEM_read_bio_RSA_PUBKEY(3), PEM_read_RSA_PUBKEY(3), PEM_write_bio_RSA_PUBKEY(3), PEM_write_RSA_PUBKEY(3), PEM_read_bio_DSAPrivateKey(3), PEM_read_DSAPrivateKey(3), PEM_write_bio_DSAPrivateKey(3), PEM_write_DSAPrivateKey(3), PEM_read_bio_DSA_PUBKEY(3), PEM_read_DSA_PUBKEY(3), PEM_write_bio_DSA_PUBKEY(3), PEM_write_DSA_PUBKEY(3), PEM_read_bio_Parameters(3), PEM_write_bio_Parameters(3), PEM_read_bio_DSAparams(3), PEM_read_DSAparams(3), PEM_write_bio_DSAparams(3), PEM_write_DSAparams(3), PEM_read_bio_DHparams(3), PEM_read_DHparams(3), PEM_write_bio_DHparams(3), PEM_write_DHparams(3), PEM_read_bio_X509(3), PEM_read_X509(3), PEM_write_bio_X509(3), PEM_write_X509(3), PEM_read_bio_X509_AUX(3), PEM_read_X509_AUX(3), PEM_write_bio_X509_AUX(3), PEM_write_X509_AUX(3), PEM_read_bio_X509_REQ(3), PEM_read_X509_REQ(3), PEM_write_bio_X509_REQ(3), PEM_write_X509_REQ(3), PEM_write_bio_X509_REQ_NEW(3), PEM_write_X509_REQ_NEW(3), PEM_read_bio_X509_CRL(3), PEM_read_X509_CRL(3), PEM_write_bio_X509_CRL(3), PEM_write_X509_CRL(3), PEM_read_bio_PKCS7(3), PEM_read_PKCS7(3), PEM_write_bio_PKCS7(3), PEM_write_PKCS7(3): PEM routines
2d-rewriter(1): a cellular automata simulator
ALLEGRO_WRITE_MASK_FLAGS(3): Allegro 5 API
Ast_mapper(3o): The interface of a -ppx rewriter
BIO_get_buffer_num_lines(3), BIO_set_read_buffer_size(3), BIO_set_write_buffer_size(3), BIO_set_buffer_size(3), BIO_set_buffer_read_data(3), BIO_f_buffer(3): buffering BIO
BIO_get_buffer_num_lines(3ossl), BIO_set_read_buffer_size(3ossl), BIO_set_write_buffer_size(3ossl), BIO_set_buffer_size(3ossl), BIO_set_buffer_read_data(3ossl), BIO_f_buffer(3ossl): buffering BIO
BIO_get_new_index(3), BIO_meth_new(3), BIO_meth_free(3), BIO_meth_get_read_ex(3), BIO_meth_set_read_ex(3), BIO_meth_get_write_ex(3), BIO_meth_set_write_ex(3), BIO_meth_get_write(3), BIO_meth_set_write(3), BIO_meth_get_read(3), BIO_meth_set_read(3), BIO_meth_get_puts(3), BIO_meth_set_puts(3), BIO_meth_get_gets(3), BIO_meth_set_gets(3), BIO_meth_get_ctrl(3), BIO_meth_set_ctrl(3), BIO_meth_get_create(3), BIO_meth_set_create(3), BIO_meth_get_destroy(3), BIO_meth_set_destroy(3), BIO_meth_get_callback_ctrl(3), BIO_meth_set_callback_ctrl(3): Routines to build up BIO methods
BIO_get_new_index(3ossl), BIO_meth_new(3ossl), BIO_meth_free(3ossl), BIO_meth_get_read_ex(3ossl), BIO_meth_set_read_ex(3ossl), BIO_meth_get_write_ex(3ossl), BIO_meth_set_write_ex(3ossl), BIO_meth_get_write(3ossl), BIO_meth_set_write(3ossl), BIO_meth_get_read(3ossl), BIO_meth_set_read(3ossl), BIO_meth_get_puts(3ossl), BIO_meth_set_puts(3ossl), BIO_meth_get_gets(3ossl), BIO_meth_set_gets(3ossl), BIO_meth_get_ctrl(3ossl), BIO_meth_set_ctrl(3ossl), BIO_meth_get_create(3ossl), BIO_meth_set_create(3ossl), BIO_meth_get_destroy(3ossl), BIO_meth_set_destroy(3ossl), BIO_meth_get_callback_ctrl(3ossl), BIO_meth_set_callback_ctrl(3ossl): Routines to build up BIO methods
BIO_read_ex(3), BIO_write_ex(3), BIO_read(3), BIO_write(3), BIO_gets(3), BIO_puts(3): BIO I/O functions
BIO_read_ex(3ossl), BIO_write_ex(3ossl), BIO_read(3ossl), BIO_write(3ossl), BIO_gets(3ossl), BIO_get_line(3ossl), BIO_puts(3ossl): BIO I/O functions
BIO_s_bio(3), BIO_make_bio_pair(3), BIO_destroy_bio_pair(3), BIO_shutdown_wr(3), BIO_set_write_buf_size(3), BIO_get_write_buf_size(3), BIO_new_bio_pair(3), BIO_get_write_guarantee(3), BIO_ctrl_get_write_guarantee(3), BIO_get_read_request(3), BIO_ctrl_get_read_request(3), BIO_ctrl_reset_read_request(3): BIO pair BIO
BIO_s_bio(3ossl), BIO_make_bio_pair(3ossl), BIO_destroy_bio_pair(3ossl), BIO_shutdown_wr(3ossl), BIO_set_write_buf_size(3ossl), BIO_get_write_buf_size(3ossl), BIO_new_bio_pair(3ossl), BIO_get_write_guarantee(3ossl), BIO_ctrl_get_write_guarantee(3ossl), BIO_get_read_request(3ossl), BIO_ctrl_get_read_request(3ossl), BIO_ctrl_reset_read_request(3ossl): BIO pair BIO
BIO_s_file(3), BIO_new_file(3), BIO_new_fp(3), BIO_set_fp(3), BIO_get_fp(3), BIO_read_filename(3), BIO_write_filename(3), BIO_append_filename(3), BIO_rw_filename(3): FILE bio
BIO_s_file(3ossl), BIO_new_file(3ossl), BIO_new_fp(3ossl), BIO_set_fp(3ossl), BIO_get_fp(3ossl), BIO_read_filename(3ossl), BIO_write_filename(3ossl), BIO_append_filename(3ossl), BIO_rw_filename(3ossl): FILE bio
BIO_should_read(3), BIO_should_write(3), BIO_should_io_special(3), BIO_retry_type(3), BIO_should_retry(3), BIO_get_retry_BIO(3), BIO_get_retry_reason(3), BIO_set_retry_reason(3): BIO retry functions
BIO_should_read(3ossl), BIO_should_write(3ossl), BIO_should_io_special(3ossl), BIO_retry_type(3ossl), BIO_should_retry(3ossl), BIO_get_retry_BIO(3ossl), BIO_get_retry_reason(3ossl), BIO_set_retry_reason(3ossl): BIO retry functions
CHECKPOINT(7): force a write-ahead log checkpoint
CK_RWCOHORT_INIT(3): initialize instance of a cohort-based reader-writer lock type
CK_RWCOHORT_INSTANCE(3): declare an instance of a cohort-based reader-writer lock type
CK_RWCOHORT_PROTOTYPE(3): define reader-writer cohort-based lock using the specified cohort type
CK_RWCOHORT_READ_LOCK(3): acquire read-only permission for cohort-based reader-writer lock
CK_RWCOHORT_READ_UNLOCK(3): relinquish read-only access to cohort-based reader-writer lock
CK_RWCOHORT_WRITE_LOCK(3): acquite write access for a cohort-based reader-writer lock
CK_RWCOHORT_WRITE_UNLOCK(3): relinquish write access for cohort-based reader-writer lock
CREATE_RULE(7): define a new rewrite rule
CRYPTO_THREAD_run_once(3), CRYPTO_THREAD_lock_new(3), CRYPTO_THREAD_read_lock(3), CRYPTO_THREAD_write_lock(3), CRYPTO_THREAD_unlock(3), CRYPTO_THREAD_lock_free(3), CRYPTO_atomic_add(3): OpenSSL thread support
CRYPTO_THREAD_run_once(3ossl), CRYPTO_THREAD_lock_new(3ossl), CRYPTO_THREAD_read_lock(3ossl), CRYPTO_THREAD_write_lock(3ossl), CRYPTO_THREAD_unlock(3ossl), CRYPTO_THREAD_lock_free(3ossl), CRYPTO_atomic_add(3ossl), CRYPTO_atomic_or(3ossl), CRYPTO_atomic_load(3ossl): OpenSSL thread support
CURLOPT_HSTSWRITEDATA(3): pointer passed to the HSTS write callback
CURLOPT_HSTSWRITEFUNCTION(3): write callback for HSTS hosts
CURLOPT_WRITEDATA(3): pointer passed to the write callback
CURLOPT_WRITEFUNCTION(3): callback for writing received data
DC_PLUG_read(2), DC_PLUG_consume(2), DC_PLUG_write(2), DC_PLUG_write_more(2), DC_PLUG_commit(2), DC_PLUG_rollback(2): DC_PLUG read/write functions
DECLARE_PEM_rw(3), PEM_read_CMS(3), PEM_read_bio_CMS(3), PEM_write_CMS(3), PEM_write_bio_CMS(3), PEM_write_DHxparams(3), PEM_write_bio_DHxparams(3), PEM_read_ECPKParameters(3), PEM_read_bio_ECPKParameters(3), PEM_write_ECPKParameters(3), PEM_write_bio_ECPKParameters(3), PEM_read_ECPrivateKey(3), PEM_write_ECPrivateKey(3), PEM_write_bio_ECPrivateKey(3), PEM_read_EC_PUBKEY(3), PEM_read_bio_EC_PUBKEY(3), PEM_write_EC_PUBKEY(3), PEM_write_bio_EC_PUBKEY(3), PEM_read_NETSCAPE_CERT_SEQUENCE(3), PEM_read_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_write_NETSCAPE_CERT_SEQUENCE(3), PEM_write_bio_NETSCAPE_CERT_SEQUENCE(3), PEM_read_PKCS8(3), PEM_read_bio_PKCS8(3), PEM_write_PKCS8(3), PEM_write_bio_PKCS8(3), PEM_write_PKCS8_PRIV_KEY_INFO(3), PEM_read_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_PKCS8_PRIV_KEY_INFO(3), PEM_write_bio_PKCS8_PRIV_KEY_INFO(3), PEM_read_SSL_SESSION(3), PEM_read_bio_SSL_SESSION(3), PEM_write_SSL_SESSION(3), PEM_write_bio_SSL_SESSION(3): PEM object encoding routines
DECLARE_PEM_rw(3ossl), PEM_read_CMS(3ossl), PEM_read_bio_CMS(3ossl), PEM_write_CMS(3ossl), PEM_write_bio_CMS(3ossl), PEM_write_DHxparams(3ossl), PEM_write_bio_DHxparams(3ossl), PEM_read_ECPKParameters(3ossl), PEM_read_bio_ECPKParameters(3ossl), PEM_write_ECPKParameters(3ossl), PEM_write_bio_ECPKParameters(3ossl), PEM_read_ECPrivateKey(3ossl), PEM_write_ECPrivateKey(3ossl), PEM_write_bio_ECPrivateKey(3ossl), PEM_read_EC_PUBKEY(3ossl), PEM_read_bio_EC_PUBKEY(3ossl), PEM_write_EC_PUBKEY(3ossl), PEM_write_bio_EC_PUBKEY(3ossl), PEM_read_NETSCAPE_CERT_SEQUENCE(3ossl), PEM_read_bio_NETSCAPE_CERT_SEQUENCE(3ossl), PEM_write_NETSCAPE_CERT_SEQUENCE(3ossl), PEM_write_bio_NETSCAPE_CERT_SEQUENCE(3ossl), PEM_read_PKCS8(3ossl), PEM_read_bio_PKCS8(3ossl), PEM_write_PKCS8(3ossl), PEM_write_bio_PKCS8(3ossl), PEM_write_PKCS8_PRIV_KEY_INFO(3ossl), PEM_read_bio_PKCS8_PRIV_KEY_INFO(3ossl), PEM_read_PKCS8_PRIV_KEY_INFO(3ossl), PEM_write_bio_PKCS8_PRIV_KEY_INFO(3ossl), PEM_read_SSL_SESSION(3ossl), PEM_read_bio_SSL_SESSION(3ossl), PEM_write_SSL_SESSION(3ossl), PEM_write_bio_SSL_SESSION(3ossl), PEM_read_X509_PUBKEY(3ossl), PEM_read_bio_X509_PUBKEY(3ossl), PEM_write_X509_PUBKEY(3ossl), PEM_write_bio_X509_PUBKEY(3ossl): PEM object encoding routines
DROP_RULE(7): remove a rewrite rule
JAM_WriteLastRead(3): Write a lastread record
JAM_WriteMBHeader(3): Write message base header
MPI_Fetch_and_op(3): Perform one-sided read-modify-write
MPI_File_iwrite(3): Nonblocking write using individual file pointer
MPI_File_iwrite_all(3): Nonblocking collective write using individual file pointer
MPI_File_iwrite_at(3): Nonblocking write using explicit offset
MPI_File_iwrite_at_all(3): Nonblocking collective write using explicit offset
MPI_File_iwrite_shared(3): Nonblocking write using shared file pointer
MPI_File_sync(3): Causes all previous writes to be transferred to the storage device
MPI_File_write(3): Write using individual file pointer
MPI_File_write_all(3): Collective write using individual file pointer
MPI_File_write_all_begin(3): Begin a split collective write using individual file pointer
MPI_File_write_all_end(3): Complete a split collective write using individual file pointer
MPI_File_write_at(3): Write using explicit offset
MPI_File_write_at_all(3): Collective write using explicit offset
MPI_File_write_at_all_begin(3): Begin a split collective write using explicit offset
MPI_File_write_at_all_end(3): Complete a split collective write using explicit offset
MPI_File_write_ordered(3): Collective write using shared file pointer
MPI_File_write_ordered_begin(3): Begin a split collective write using shared file pointer
MPI_File_write_ordered_end(3): Complete a split collective write using shared file pointer
MPI_File_write_shared(3): Write using shared file pointer
MPI_T_cvar_write(3): Write a control variable
MPI_T_pvar_write(3): Write a performance variable
Mat_VarWrite(3): Writes a MATLAB variable to a MATLAB MAT file
Mat_VarWriteAppend(3): Writes/appends a MATLAB variable to an HDF5 format MATLAB MAT file
Munin::Node::SpoolWriter(3): Writing side of the spool functionality
NAL_BUFFER_new(2), NAL_BUFFER_free(2), NAL_BUFFER_set_size(2), NAL_BUFFER_empty(2), NAL_BUFFER_full(2), NAL_BUFFER_notempty(2), NAL_BUFFER_notfull(2), NAL_BUFFER_used(2), NAL_BUFFER_unused(2), NAL_BUFFER_data(2), NAL_BUFFER_size(2), NAL_BUFFER_write(2), NAL_BUFFER_read(2), NAL_BUFFER_write_ptr(2), NAL_BUFFER_takedata(2), NAL_BUFFER_wrote(2): libnal buffer functions
OSSL_CMP_MSG_get0_header(3ossl), OSSL_CMP_MSG_get_bodytype(3ossl), OSSL_CMP_MSG_update_transactionID(3ossl), OSSL_CMP_CTX_setup_CRM(3ossl), OSSL_CMP_MSG_read(3ossl), OSSL_CMP_MSG_write(3ossl), d2i_OSSL_CMP_MSG_bio(3ossl), i2d_OSSL_CMP_MSG_bio(3ossl): function(s) manipulating CMP messages
PEM_write(3), PEM_write_bio(3), PEM_read(3), PEM_read_bio(3), PEM_do_header(3), PEM_get_EVP_CIPHER_INFO(3): PEM encoding routines
PEM_write(3ossl), PEM_write_bio(3ossl), PEM_read(3ossl), PEM_read_bio(3ossl), PEM_do_header(3ossl), PEM_get_EVP_CIPHER_INFO(3ossl): PEM encoding routines
PEM_write_bio_ASN1_stream(3): generic PEM encoder
PEM_write_bio_CMS_stream(3): output CMS_ContentInfo structure in PEM format
PEM_write_bio_CMS_stream(3ossl): output CMS_ContentInfo structure in PEM format
PEM_write_bio_PKCS7_stream(3): output PKCS7 structure in PEM format
PEM_write_bio_PKCS7_stream(3ossl): output PKCS7 structure in PEM format
RAND_load_file(3), RAND_write_file(3), RAND_file_name(3): PRNG seed file
RAND_load_file(3ossl), RAND_write_file(3ossl), RAND_file_name(3ossl): PRNG seed file
SMIME_write_ASN1(3): generate an S/MIME message
SMIME_write_ASN1_ex(3ossl), SMIME_write_ASN1(3ossl): convert structure to S/MIME format
SMIME_write_CMS(3): convert CMS structure to S/MIME format
SMIME_write_CMS(3ossl): convert CMS structure to S/MIME format
SMIME_write_PKCS7(3): convert PKCS#7 structure to S/MIME format
SMIME_write_PKCS7(3ossl): convert PKCS#7 structure to S/MIME format
SPI_exec(3): execute a read/write command
SPI_execp(3): execute a statement in read/write mode
SSL_QUIC_METHOD(3ossl), OSSL_ENCRYPTION_LEVEL(3ossl), SSL_CTX_set_quic_method(3ossl), SSL_set_quic_method(3ossl), SSL_set_quic_transport_params(3ossl), SSL_get_peer_quic_transport_params(3ossl), SSL_quic_max_handshake_flight_len(3ossl), SSL_quic_read_level(3ossl), SSL_quic_write_level(3ossl), SSL_provide_quic_data(3ossl), SSL_process_quic_post_handshake(3ossl), SSL_is_quic(3ossl), SSL_get_peer_quic_transport_version(3ossl), SSL_get_quic_transport_version(3ossl), SSL_set_quic_transport_version(3ossl), SSL_set_quic_use_legacy_codepoint(3ossl), SSL_set_quic_early_data_enabled(3ossl): QUIC support
SSL_set_max_early_data(3), SSL_CTX_set_max_early_data(3), SSL_get_max_early_data(3), SSL_CTX_get_max_early_data(3), SSL_set_recv_max_early_data(3), SSL_CTX_set_recv_max_early_data(3), SSL_get_recv_max_early_data(3), SSL_CTX_get_recv_max_early_data(3), SSL_SESSION_get_max_early_data(3), SSL_SESSION_set_max_early_data(3), SSL_write_early_data(3), SSL_read_early_data(3), SSL_get_early_data_status(3), SSL_allow_early_data_cb_fn(3), SSL_CTX_set_allow_early_data_cb(3), SSL_set_allow_early_data_cb(3): functions for sending and receiving early data
SSL_set_max_early_data(3ossl), SSL_CTX_set_max_early_data(3ossl), SSL_get_max_early_data(3ossl), SSL_CTX_get_max_early_data(3ossl), SSL_set_recv_max_early_data(3ossl), SSL_CTX_set_recv_max_early_data(3ossl), SSL_get_recv_max_early_data(3ossl), SSL_CTX_get_recv_max_early_data(3ossl), SSL_SESSION_get_max_early_data(3ossl), SSL_SESSION_set_max_early_data(3ossl), SSL_write_early_data(3ossl), SSL_read_early_data(3ossl), SSL_get_early_data_status(3ossl), SSL_allow_early_data_cb_fn(3ossl), SSL_CTX_set_allow_early_data_cb(3ossl), SSL_set_allow_early_data_cb(3ossl): functions for sending and receiving early data
SSL_want(3), SSL_want_nothing(3), SSL_want_read(3), SSL_want_write(3), SSL_want_x509_lookup(3), SSL_want_async(3), SSL_want_async_job(3), SSL_want_client_hello_cb(3): obtain state information TLS/SSL I/O operation
SSL_want(3ossl), SSL_want_nothing(3ossl), SSL_want_read(3ossl), SSL_want_write(3ossl), SSL_want_x509_lookup(3ossl), SSL_want_retry_verify(3ossl), SSL_want_async(3ossl), SSL_want_async_job(3ossl), SSL_want_client_hello_cb(3ossl): obtain state information TLS/SSL I/O operation
SSL_write_ex(3), SSL_write(3), SSL_sendfile(3): write bytes to a TLS/SSL connection
SSL_write_ex(3ossl), SSL_write(3ossl), SSL_sendfile(3ossl): write bytes to a TLS/SSL connection
TIFFFieldWriteCount(3tiff): Get number of values to be written to field
TIFFFlush(3tiff), TIFFFlushData(3tiff): flush pending writes to an open TIFF file
TIFFReadBufferSetup(3tiff), TIFFWriteBufferSetup(3tiff): I/O buffering control routines
TIFFWriteDirectory(3tiff), TIFFRewriteDirectory(3tiff), TIFFCheckpointDirectory(3tiff): write the current directory in an open TIFF file
TIFFWriteEncodedStrip(3tiff), TIFFWritedEncodedStrip(3tiff): compress and write a strip of data to an open TIFF file
TIFFWriteEncodedTile(3tiff), TIFFWritedEncodedTile(3tiff): compress and write a tile of data to an open TIFF file
TIFFWriteRawStrip(3tiff): write a strip of raw data to an open TIFF file
TIFFWriteRawTile(3tiff): write a tile of raw data to an open TIFF file
TIFFWriteScanline(3tiff): write a scanline to an open TIFF file
TIFFWriteTile(3tiff): encode and write a tile of data to an open TIFF file
Tcl_Close.tcl85(3), Tcl_OpenFileChannel(3), Tcl_OpenCommandChannel(3), Tcl_MakeFileChannel(3), Tcl_GetChannel(3), Tcl_GetChannelNames(3), Tcl_GetChannelNamesEx(3), Tcl_RegisterChannel(3), Tcl_UnregisterChannel(3), Tcl_DetachChannel(3), Tcl_IsStandardChannel(3), Tcl_Close(3), Tcl_ReadChars(3), Tcl_Read(3), Tcl_GetsObj(3), Tcl_Gets(3), Tcl_WriteObj(3), Tcl_WriteChars(3), Tcl_Write(3), Tcl_Flush(3), Tcl_Seek(3), Tcl_Tell(3), Tcl_TruncateChannel(3), Tcl_GetChannelOption(3), Tcl_SetChannelOption(3), Tcl_Eof(3), Tcl_InputBlocked(3), Tcl_InputBuffered(3), Tcl_OutputBuffered(3), Tcl_Ungets(3), Tcl_ReadRaw(3), Tcl_WriteRaw(3): buffered I/O facilities using channels
Tcl_Close.tcl86(3), Tcl_OpenFileChannel(3), Tcl_OpenCommandChannel(3), Tcl_MakeFileChannel(3), Tcl_GetChannel(3), Tcl_GetChannelNames(3), Tcl_GetChannelNamesEx(3), Tcl_RegisterChannel(3), Tcl_UnregisterChannel(3), Tcl_DetachChannel(3), Tcl_IsStandardChannel(3), Tcl_Close(3), Tcl_ReadChars(3), Tcl_Read(3), Tcl_GetsObj(3), Tcl_Gets(3), Tcl_WriteObj(3), Tcl_WriteChars(3), Tcl_Write(3), Tcl_Flush(3), Tcl_Seek(3), Tcl_Tell(3), Tcl_TruncateChannel(3), Tcl_GetChannelOption(3), Tcl_SetChannelOption(3), Tcl_Eof(3), Tcl_InputBlocked(3), Tcl_InputBuffered(3), Tcl_OutputBuffered(3), Tcl_Ungets(3), Tcl_ReadRaw(3), Tcl_WriteRaw(3): buffered I/O facilities using channels
Tcl_Close.tcl87(3), Tcl_OpenFileChannel(3), Tcl_OpenCommandChannel(3), Tcl_MakeFileChannel(3), Tcl_GetChannel(3), Tcl_GetChannelNames(3), Tcl_GetChannelNamesEx(3), Tcl_RegisterChannel(3), Tcl_UnregisterChannel(3), Tcl_DetachChannel(3), Tcl_IsStandardChannel(3), Tcl_Close(3), Tcl_ReadChars(3), Tcl_Read(3), Tcl_GetsObj(3), Tcl_Gets(3), Tcl_WriteObj(3), Tcl_WriteChars(3), Tcl_Write(3), Tcl_Flush(3), Tcl_Seek(3), Tcl_Tell(3), Tcl_TruncateChannel(3), Tcl_GetChannelOption(3), Tcl_SetChannelOption(3), Tcl_Eof(3), Tcl_InputBlocked(3), Tcl_InputBuffered(3), Tcl_OutputBuffered(3), Tcl_Ungets(3), Tcl_ReadRaw(3), Tcl_WriteRaw(3): buffered I/O facilities using channels
Tspi_TPM_DirWrite(3): write to a Data Integrity Register
Tspi_TPM_PcrExtend(3): extend a PCR register and optionally write the PCR event log
UI_METHOD(3), UI_create_method(3), UI_destroy_method(3), UI_method_set_opener(3), UI_method_set_writer(3), UI_method_set_flusher(3), UI_method_set_reader(3), UI_method_set_closer(3), UI_method_set_data_duplicator(3), UI_method_set_prompt_constructor(3), UI_method_set_ex_data(3), UI_method_get_opener(3), UI_method_get_writer(3), UI_method_get_flusher(3), UI_method_get_reader(3), UI_method_get_closer(3), UI_method_get_data_duplicator(3), UI_method_get_data_destructor(3), UI_method_get_prompt_constructor(3), UI_method_get_ex_data(3): user interface method creation and destruction
UI_METHOD(3ossl), UI_create_method(3ossl), UI_destroy_method(3ossl), UI_method_set_opener(3ossl), UI_method_set_writer(3ossl), UI_method_set_flusher(3ossl), UI_method_set_reader(3ossl), UI_method_set_closer(3ossl), UI_method_set_data_duplicator(3ossl), UI_method_set_prompt_constructor(3ossl), UI_method_set_ex_data(3ossl), UI_method_get_opener(3ossl), UI_method_get_writer(3ossl), UI_method_get_flusher(3ossl), UI_method_get_reader(3ossl), UI_method_get_closer(3ossl), UI_method_get_data_duplicator(3ossl), UI_method_get_data_destructor(3ossl), UI_method_get_prompt_constructor(3ossl), UI_method_get_ex_data(3ossl): user interface method creation and destruction
XReadBitmapFile(3), XReadBitmapFileData(3), XWriteBitmapFile(3), XCreatePixmapFromBitmapData(3), XCreateBitmapFromData(3): manipulate bitmaps
Xau library: XauFileName(3), XauReadAuth(3), XauLockAuth(3), XauUnlockAuth(3), XauWriteAuth(3), XauDisposeAuth(3), XauGetAuthByAddr(3), XauGetBestAuthByAddr(3): X authority database routines
XvPutStill(3): write a single frame of video to a drawable
XvPutVideo(3): write video into a drawable
afReadMisc(3), afWriteMisc(3), afSeekMisc(3): access miscellaneous metadata in an audio file
afWriteFrames(3): write sample frames to a track in an audio file
al_fwrite(3): Allegro 5 API
al_fwrite16be(3): Allegro 5 API
al_fwrite16le(3): Allegro 5 API
al_fwrite32be(3): Allegro 5 API
al_fwrite32le(3): Allegro 5 API
amidi(1): read from and write to ALSA RawMIDI ports
amin(1): notify writers that you are busy
apriboot(1): rewrite disc boot sector, converting between Apricot and PCDOS
archive_write(3): functions for creating archives
archive_write_blocksize(3), archive_write_get_bytes_per_block(3), archive_write_set_bytes_per_block(3), archive_write_get_bytes_in_last_block(3), archive_write_set_bytes_in_last_block(3): functions for creating archives
archive_write_data(3), archive_write_data_block(3): functions for creating archives
archive_write_disk(3), archive_write_disk_new(3), archive_write_disk_set_options(3), archive_write_disk_set_skip_file(3), archive_write_disk_set_group_lookup(3), archive_write_disk_set_standard_lookup(3), archive_write_disk_set_user_lookup(3): functions for creating objects on disk
archive_write_fail(3), archive_write_close(3), archive_write_finish(3), archive_write_free(3): functions for creating archives
archive_write_filter(3), archive_write_add_filter_b64encode(3), archive_write_add_filter_by_name(3), archive_write_add_filter_bzip2(3), archive_write_add_filter_compress(3), archive_write_add_filter_grzip(3), archive_write_add_filter_gzip(3), archive_write_add_filter_lrzip(3), archive_write_add_filter_lz4(3), archive_write_add_filter_lzip(3), archive_write_add_filter_lzma(3), archive_write_add_filter_lzop(3), archive_write_add_filter_none(3), archive_write_add_filter_program(3), archive_write_add_filter_uuencode(3), archive_write_add_filter_xz(3), archive_write_add_filter_zstd(3): functions enabling output filters
archive_write_finish_entry(3): functions for creating archives
archive_write_format(3), archive_write_set_format(3), archive_write_set_format_7zip(3), archive_write_set_format_ar(3), archive_write_set_format_ar_bsd(3), archive_write_set_format_ar_svr4(3), archive_write_set_format_by_name(3), archive_write_set_format_cpio(3), archive_write_set_format_cpio_bin(3), archive_write_set_format_cpio_newc(3), archive_write_set_format_cpio_odc(3), archive_write_set_format_cpio_pwb(3), archive_write_set_format_filter_by_ext(3), archive_write_set_format_filter_by_ext_def(3), archive_write_set_format_gnutar(3), archive_write_set_format_iso9660(3), archive_write_set_format_mtree(3), archive_write_set_format_mtree_classic(3), archive_write_set_format_mtree_default(3), archive_write_set_format_pax(3), archive_write_set_format_pax_restricted(3), archive_write_set_format_raw(3), archive_write_set_format_shar(3), archive_write_set_format_shar_dump(3), archive_write_set_format_ustar(3), archive_write_set_format_v7tar(3), archive_write_set_format_warc(3), archive_write_set_format_xar(3), archive_write_set_format_zip(3): functions for creating archives
archive_write_header(3): functions for creating archives
archive_write_new(3): functions for creating archives
archive_write_open(3), archive_write_open2(3), archive_write_open_fd(3), archive_write_open_FILE(3), archive_write_open_filename(3), archive_write_open_memory(3): functions for creating archives
archive_write_set_filter_option(3), archive_write_set_format_option(3), archive_write_set_option(3), archive_write_set_options(3): functions controlling options for writing archives
archive_write_set_passphrase(3), archive_write_set_passphrase_callback(3): functions for writing encrypted archives
asn1_write_value(3): API function
asttable(1), Table(1): read and write ASCII and FITS tables
atf-c(3), ATF_CHECK(3), ATF_CHECK_MSG(3), ATF_CHECK_EQ(3), ATF_CHECK_EQ_MSG(3), ATF_CHECK_MATCH(3), ATF_CHECK_MATCH_MSG(3), ATF_CHECK_STREQ(3), ATF_CHECK_STREQ_MSG(3), ATF_CHECK_ERRNO(3), ATF_REQUIRE(3), ATF_REQUIRE_MSG(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_EQ_MSG(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_MATCH_MSG(3), ATF_REQUIRE_STREQ(3), ATF_REQUIRE_STREQ_MSG(3), ATF_REQUIRE_ERRNO(3), ATF_TC(3), ATF_TC_BODY(3), ATF_TC_BODY_NAME(3), ATF_TC_CLEANUP(3), ATF_TC_CLEANUP_NAME(3), ATF_TC_HEAD(3), ATF_TC_HEAD_NAME(3), ATF_TC_NAME(3), ATF_TC_WITH_CLEANUP(3), ATF_TC_WITHOUT_HEAD(3), ATF_TP_ADD_TC(3), ATF_TP_ADD_TCS(3), atf_tc_get_config_var(3), atf_tc_get_config_var_wd(3), atf_tc_get_config_var_as_bool(3), atf_tc_get_config_var_as_bool_wd(3), atf_tc_get_config_var_as_long(3), atf_tc_get_config_var_as_long_wd(3), atf_no_error(3), atf_tc_expect_death(3), atf_tc_expect_exit(3), atf_tc_expect_fail(3), atf_tc_expect_pass(3), atf_tc_expect_signal(3), atf_tc_expect_timeout(3), atf_tc_fail(3), atf_tc_fail_nonfatal(3), atf_tc_pass(3), atf_tc_skip(3), atf_utils_cat_file(3), atf_utils_compare_file(3), atf_utils_copy_file(3), atf_utils_create_file(3), atf_utils_file_exists(3), atf_utils_fork(3), atf_utils_free_charpp(3), atf_utils_grep_file(3), atf_utils_grep_string(3), atf_utils_readline(3), atf_utils_redirect(3), atf_utils_wait(3): C API to write ATF-based test programs
atf-c++(3), ATF_ADD_TEST_CASE(3), ATF_CHECK_ERRNO(3), ATF_FAIL(3), ATF_INIT_TEST_CASES(3), ATF_PASS(3), ATF_REQUIRE(3), ATF_REQUIRE_EQ(3), ATF_REQUIRE_ERRNO(3), ATF_REQUIRE_IN(3), ATF_REQUIRE_MATCH(3), ATF_REQUIRE_NOT_IN(3), ATF_REQUIRE_THROW(3), ATF_REQUIRE_THROW_RE(3), ATF_SKIP(3), ATF_TEST_CASE(3), ATF_TEST_CASE_BODY(3), ATF_TEST_CASE_CLEANUP(3), ATF_TEST_CASE_HEAD(3), ATF_TEST_CASE_NAME(3), ATF_TEST_CASE_USE(3), ATF_TEST_CASE_WITH_CLEANUP(3), ATF_TEST_CASE_WITHOUT_HEAD(3), atf::utils::cat_file(3), atf::utils::compare_file(3), atf::utils::copy_file(3), atf::utils::create_file(3), atf::utils::file_exists(3), atf::utils::fork(3), atf::utils::grep_collection(3), atf::utils::grep_file(3), atf::utils::grep_string(3), atf::utils::redirect(3), atf::utils::wait(3): C++ API to write ATF-based test programs
atf-sh(3), atf_add_test_case(3), atf_check(3), atf_check_equal(3), atf_config_get(3), atf_config_has(3), atf_expect_death(3), atf_expect_exit(3), atf_expect_fail(3), atf_expect_pass(3), atf_expect_signal(3), atf_expect_timeout(3), atf_fail(3), atf_get(3), atf_get_srcdir(3), atf_pass(3), atf_require_prog(3), atf_set(3), atf_skip(3), atf_test_case(3): POSIX shell API to write ATF-based test programs
au_close(3), au_close_buffer(3), au_close_token(3), au_open(3), au_write(3): create and commit audit records
aviindex(1): Write and read text files describing the index of an AVI file

bf_tar(1): shell script to write a tar file of a bogofilter directory to stdout
blind-rewrite-head(1): Rewrite the head of a video
blind-write-head(1): Writes the head of a video
bmp_unwrite_line(3): Direct access bank switching line release. Allegro game programming library
bmp_write_line(3): Direct access bank switching line selection for writing. Allegro game programming library
ccrewrite(1): Rewrite CLR assemblies for runtime code contract verification
cdrdao(1): reads and writes CDs in disc-at-once mode
cgiwrap_write(3), cgiwrap_write (3): wrapper for the fwrite(stdout)
cgiwrap_writef(3), cgiwrap_writef (3): a wrapper for printf
cgiwrap_writevf(3), cgiwrap_writevf (3): a wrapper for vprintf
chan.tcl85(n), chan(n): Read, write and manipulate channels
chan.tcl86(n), chan(n): Read, write and manipulate channels
chan.tcl87(n), chan(n): Read, write and manipulate channels
ck_brlock(3), ck_brlock_init(3), ck_brlock_write_lock(3), ck_brlock_write_unlock(3), ck_brlock_write_trylock(3), ck_brlock_read_register(3), ck_brlock_read_unregister(3), ck_brlock_read_lock(3), ck_brlock_read_trylock(3), ck_brlock_read_unlock(3): big-reader locks
ck_pflock(3), ck_pflock_init(3), ck_pflock_write_lock(3), ck_pflock_write_unlock(3), ck_pflock_read_lock(3), ck_pflock_read_unlock(3): centralized phase-fair reader-writer locks
ck_pr_fence_atomic(3): enforce partial ordering of atomic read-modify-write operations
ck_pr_fence_atomic_load(3): enforce ordering of atomic read-modify-write operations to load operations
ck_pr_fence_atomic_store(3): enforce ordering of atomic read-modify-write operations to store operations
ck_pr_fence_load_atomic(3): enforce ordering of load operations to atomic read-modify-write operations
ck_queue(3), CK_LIST_EMPTY(3), CK_LIST_ENTRY(3), CK_LIST_FIRST(3), CK_LIST_FOREACH(3), CK_LIST_FOREACH_SAFE(3), CK_LIST_HEAD(3), CK_LIST_HEAD_INITIALIZER(3), CK_LIST_INIT(3), CK_LIST_INSERT_AFTER(3), CK_LIST_INSERT_BEFORE(3), CK_LIST_INSERT_HEAD(3), CK_LIST_MOVE(3), CK_LIST_NEXT(3), CK_LIST_REMOVE(3), CK_LIST_SWAP(3), CK_SLIST_EMPTY(3), CK_SLIST_ENTRY(3), CK_SLIST_FIRST(3), CK_SLIST_FOREACH(3), CK_SLIST_FOREACH_PREVPTR(3), CK_SLIST_FOREACH_SAFE(3), CK_SLIST_HEAD(3), CK_SLIST_HEAD_INITIALIZER(3), CK_SLIST_INIT(3), CK_SLIST_INSERT_AFTER(3), CK_SLIST_INSERT_HEAD(3), CK_SLIST_MOVE(3), CK_SLIST_NEXT(3), CK_SLIST_REMOVE(3), CK_SLIST_REMOVE_AFTER(3), CK_SLIST_REMOVE_HEAD(3), CK_SLIST_SWAP(3), CK_STAILQ_CONCAT(3), CK_STAILQ_EMPTY(3), CK_STAILQ_ENTRY(3), CK_STAILQ_FIRST(3), CK_STAILQ_FOREACH(3), CK_STAILQ_FOREACH_SAFE(3), CK_STAILQ_HEAD(3), CK_STAILQ_HEAD_INITIALIZER(3), CK_STAILQ_INIT(3), CK_STAILQ_INSERT_AFTER(3), CK_STAILQ_INSERT_HEAD(3), CK_STAILQ_INSERT_TAIL(3), CK_STAILQ_MOVE(3), CK_STAILQ_NEXT(3), CK_STAILQ_REMOVE(3), CK_STAILQ_REMOVE_AFTER(3), CK_STAILQ_REMOVE_HEAD(3), CK_STAILQ_SWAP(3): multi-reader single-writer singly-linked lists, singly-linked tail queues and lists
ck_rwcohort(3): generalized interface for reader-writer locks using cohort locks
ck_rwlock(3), ck_rwlock_init(3), ck_rwlock_write_lock(3), ck_rwlock_write_unlock(3), ck_rwlock_write_trylock(3), ck_rwlock_write_downgrade(3), ck_rwlock_locked_writer(3), ck_rwlock_read_lock(3), ck_rwlock_read_trylock(3), ck_rwlock_read_unlock(3), ck_rwlock_locked_reader(3), ck_rwlock_recursive_write_lock(3), ck_rwlock_recursive_write_trylock(3), ck_rwlock_recurisve_write_unlock(3), ck_rwlock_recursive_read_lock(3), ck_rwlock_recursive_read_trylock(3), ck_rwlock_recursive_read_unlock(3): centralized write-biased reader-writer locks
ck_sequence(3), ck_sequence_init(3), ck_sequence_read_begin(3), ck_sequence_read_retry(3), ck_sequence_write_begin(3), ck_sequence_write_end(3): sequence locks
ck_swlock(3), ck_swlock_init(3), ck_swlock_write_latch(3), ck_swlock_write_unlatch(3), ck_swlock_write_lock(3), ck_swlock_write_unlock(3), ck_swlock_write_trylock(3), ck_swlock_write_downgrade(3), ck_swlock_locked_writer(3), ck_swlock_read_lock(3), ck_swlock_read_trylock(3), ck_swlock_read_unlock(3), ck_swlock_locked_reader(3): centralized copy-safe write-biased single-writer read-write locks
ck_tflock(3), ck_tflock_ticket_init(3), ck_tflock_ticket_write_lock(3), ck_tflock_ticket_write_unlock(3), ck_tflock_ticket_read_lock(3), ck_tflock_ticket_read_unlock(3): centralized task-fair reader-writer locks
clear_zbuffer(3): Writes a depth value into the given Z-buffer. Allegro game programming library
cnfsheadconf(8): Read and write CNFS headers
combine_tessdata(1): combine/extract/overwrite/list/compact Tesseract data
coredns-rewrite(7), rewrite(7): performs internal message rewriting
cronolog(1m): write log messages to log files named according to a template
csv(3): CSV parser and writer library
cual(6), Cual(6): Cuyo Animation Language Cual is the main language used to describe the animations in cuyo. Strictly speaking it's the stuff between the << >> brackets in the level description files (xxx.ld). On the other hand this man page aims at being a complete description of how to write levels for cuyo. But it's still under construction. See the file "example.ld" to get an idea of how the rest of the level description works. There's also a bit of example Cual code in "example.ld". And of course, all the existing levels are examples. Note that Cual is probably still very buggy. So if strange things happen and you're sure it's not your fault, tell me (cuyo@karimmi.de)
curl_multi_perform(3): reads/writes available data from easy handles
curl_multi_socket(3): reads/writes available data
curl_multi_socket_action(3): reads/writes available data given an action
cxSetWriteFunc(3): Sets the write function for this file pointer
cxWrite(3): Writes data to a file pointer
dbh_update(3), dbh_writeheader(3): write data record or file header to disk
dconf-service(1): D-Bus service for writes to the dconf database
dmtxwrite(1): create Data Matrix barcodes
doasedit(8): edit a text file and then write the file back to its original location with admin access
dwgrewrite(1): manual page for dwgrewrite 0.12.4
dwgwrite(1): manual page for dwgwrite 0.12.4
dxfwrite(1): manual page for dxfwrite 0.12.4
ecalloc(3), emalloc(3), eread(3), erealloc(3), esetenv(3), estrdup(3), ewrite(3): exit-on-failure wrapper functions
encfssh(1): mount encrypted virtual filesystem and start shell Write in progress
exflame(3): How to write directly to video memory improving performance. Allegro game programming library
explain_fputs_or_die(3): write a string to a stream and report errors require_index { "write a string to a stream and report errors" }
explain_fwrite(3): explain fwrite(3) errors require_index { }
explain_fwrite_or_die(3): binary stream output and report errors require_index { "binary stream output and report errors" }
explain_puts_or_die(3): write a string and a newline to stdout and report errors require_index { "write a string and a trailing newline to stdout and report errors" }
explain_pwrite(3): explain pwrite(2) errors require_index { }
explain_pwrite_or_die(3): seek and write to a file descriptor and report errors require_index { "write to a file descriptor at a given offset and report errors" }
explain_write(3): explain write(2) errors require_index { }
explain_write_or_die(3): write to a file descriptor and report errors require_index { "write to a file descriptor and report errors" }
explain_writev(3): explain writev(2) errors require_index { }
explain_writev_or_die(3): write data from multiple buffers and report errors require_index { "write data from multiple buffers and report errors" }
f3write(1), f3read(1): test real flash memory capacity
fi_eq(3): Event queue operations fi_eq_open / fi_close Open/close an event queue fi_control Control operation of EQ fi_eq_read / fi_eq_readerr Read an event from an event queue fi_eq_write Writes an event to an event queue fi_eq_sread A synchronous (blocking) read of an event queue fi_eq_strerror Converts provider specific error information into a printable string
fi_rma(3): Remote memory access operations fi_read / fi_readv / fi_readmsg Initiates a read from remote memory fi_write / fi_writev / fi_writemsg fi_inject_write / fi_writedata : Initiate a write to remote memory
filter_read(3), filter_write(3), filter_end(3), filter_convert(3), filter_destroy(3), filter_fopen(3), filter_process(3): generic data filtering
fixwwps(1): filter to fix Windows Write documents so PSUtils work
flasher(1): flash keyboard LEDs to indicate file writes
flashrom(8): detect, read, write, verify and erase flash chips
flowcap(8): Capture network flow data and write it to temporary files
fmt_iso8601(3): write a date in ASCII conforming to ISO-8601
font2c(1): Write PostScript Type 0 or Type 1 font as C code
fragroute(8): intercept, modify, and rewrite egress traffic
ftimes-cat(1), FTimesCat(1): Write the contents of a file or stdin to stdout
fuse-zip(1): a FUSE filesystem for zip archives with write support
gdnsd-plugin-api(3): How to write gdnsd plugin code
getsenderip(1): write sender IP to a file
git-commit-graph(1): Write and verify Git commit-graph files
git-filter-branch(1): Rewrite branches
git-filter-repo(1): Rewrite repository history
git-force-clone(1): overwrite local repositories with clone
git-multi-pack-index(1): Write and verify multi-pack-indexes
git-obliterate(1): rewrite past commits to remove some files
git-reauthor(1): Rewrite history to change author's identity
git-write-tree(1): Create a tree object from the current index
glDrawPixels(3), "glDrawPixels(3): write a block of pixels to the frame buffer
gl_printf(3): write formatted output in graphic mode
gl_setwritemode(3): set the font writemode flags
gl_write(3), gl_writen(3): write a text string
gnutls_handshake_write(3): API function
grcat(1): read from standard input, colourise it and write to standard output
grotty(1): groff driver for typewriter-like devices
gshred(1), shred(1): overwrite a file to hide its contents, and optionally delete it
gsync(1), sync(1): Synchronize cached writes to persistent storage
gtee(1), tee(1): read from standard input and write to standard output and files
hcs12mem(1): Freescale S12 MCU family memory reader/writer
hdf_write_file(3), hdf_write_file (3): write an HDF data file Description: Input: Output:
hdf_write_file_atomic(3), hdf_write_file_atomic (3): write an HDF data file atomically
hdf_write_string(3), hdf_write_string (3): serialize an HDF dataset to a string Description: Input: Output:
htdump(1): write out an ASCII-text version of the document database
htntlm(1): read/write NTLM message
httxt2dbm(1): Generate dbm files for use with RewriteMap
hugo-mod-npm-pack(1): Experimental: Prepares and writes a composite package.json file for your project
icuexportdata(1): Writes text files with Unicode properties data from ICU
id3ren(1): Reads and writes ID3 tags from mp3 files
inetcat(1): Opens a read/write interface via STDIN/STDOUT to a TCP port on a usbmux device
iscsi-swp(1): Utility to get/set software write protect on an iSCSI LUN
k8055(1): read from/write to the velleman k8055 USB I/O board
ldns_buffer_write_at(3), ldns_buffer_write(3), ldns_buffer_write_string_at(3), ldns_buffer_write_string(3), ldns_buffer_write_u8_at(3), ldns_buffer_write_u8(3), ldns_buffer_write_u16_at(3), ldns_buffer_write_u16(3), ldns_buffer_read_at(3), ldns_buffer_read(3), ldns_buffer_read_u8_at(3), ldns_buffer_read_u8(3), ldns_buffer_read_u16_at(3), ldns_buffer_read_u16(3), ldns_buffer_read_u32_at(3), ldns_buffer_read_u32(3), ldns_buffer_write_u32(3), ldns_buffer_write_u32_at(3): reading and writing buffers
libowfat_buffer(3), buffer.h(3): generic read/write buffering
libowfat_buffer_flush(3), buffer_flush(3): feed buffer to write function
libowfat_buffer_put(3), buffer_put(3): write binary data to buffer
libowfat_buffer_put8long(3), buffer_put8long(3): write an octal ASCII representation of an unsigned long integer to buffer
libowfat_buffer_putalign(3), buffer_putalign(3): write binary data to buffer
libowfat_buffer_puterror(3), buffer_puterror(3): write error string to buffer and flush
libowfat_buffer_puterror2(3), buffer_puterror2(3): write error string to buffer and flush
libowfat_buffer_putflush(3), buffer_putflush(3): write binary data to buffer and flush
libowfat_buffer_putlong(3), buffer_putlong(3): write a decimal ASCII representation of a signed long integer to buffer
libowfat_buffer_putlonglong(3), buffer_putlonglong(3): write a decimal ASCII representation of a signed long integer to buffer
libowfat_buffer_putm(3), buffer_putm(3): write ASCIIZ string(s) to buffer
libowfat_buffer_putnlflush(3), buffer_putnlflush(3): write '
libowfat_buffer_puts(3), buffer_puts(3): write ASCIIZ string to buffer
libowfat_buffer_putsa(3), buffer_putsa(3): write stralloc to buffer
libowfat_buffer_putsaflush(3), buffer_putsa(3): write stralloc to buffer and flush
libowfat_buffer_putsalign(3), buffer_putsalign(3): write ASCIIZ string to buffer
libowfat_buffer_putsflush(3), buffer_putsflush(3): write ASCIIZ string to buffer and flush
libowfat_buffer_putspace(3), buffer_putspace(3): write ASCII space to buffer
libowfat_buffer_putulong(3), buffer_putulong(3): write a decimal ASCII representation of an unsigned long integer to buffer
libowfat_buffer_putulonglong(3), buffer_putulonglong(3): write a decimal ASCII representation of a signed long integer to buffer
libowfat_buffer_putxlong(3), buffer_putxlong(3): write a hexidecimal ASCII representation of an unsigned long integer to buffer
libowfat_fmt_8long(3), fmt_8long(3): write an octal ASCII representation of an unsigned long integer
libowfat_fmt_double(3), fmt_double(3): write an ASCII representation of a double
libowfat_fmt_httpdate(3), fmt_httpdate(3): write a date in ASCII as in the HTTP protocol
libowfat_fmt_human(3), fmt_human(3): write a human readable ASCII representation of a long integer
libowfat_fmt_humank(3), fmt_humank(3): write a human readable ASCII representation of a long integer
libowfat_fmt_ip4(3), fmt_ip4(3): write a formatted ASCII representation of an IPv4 number
libowfat_fmt_ip6(3), fmt_ip6(3): write a formatted ASCII representation of an IPv6 number
libowfat_fmt_ip6_flat(3), fmt_ip6_flat(3): write a formatted ASCII representation of an IPv6 number
libowfat_fmt_ip6c(3), fmt_ip6c(3): write a formatted ASCII representation of an IPv6 number
libowfat_fmt_ip6if(3), fmt_ip6if(3): write a formatted ASCII representation of an IPv6 number
libowfat_fmt_ip6ifc(3), fmt_ip6ifc(3): write a formatted ASCII representation of an IPv6 number
libowfat_fmt_long(3), fmt_long(3): write an ASCII representation of a long integer
libowfat_fmt_longlong(3), fmt_longlong(3): write an ASCII representation of a long long integer
libowfat_fmt_minus(3), fmt_minus(3): write '-' for negative integers
libowfat_fmt_plusminus(3), fmt_plusminus(3): write '+' or '-'
libowfat_fmt_str(3), fmt_str(3): write an ASCII string
libowfat_fmt_strm(3), fmt_strm(3): write multiple ASCII strings
libowfat_fmt_strn(3), fmt_strn(3): write an ASCII string
libowfat_fmt_uint(3), fmt_uint(3): write an ASCII representation of an unsigned integer
libowfat_fmt_uint0(3), fmt_uint0(3): write a zero-padded ASCII representation of an unsigned integer
libowfat_fmt_ulong(3), fmt_ulong(3): write an ASCII representation of an unsigned long integer
libowfat_fmt_ulong0(3), fmt_ulong0(3): write a zero-padded ASCII representation of an unsigned long integer
libowfat_fmt_ulonglong(3), fmt_ulonglong(3): write an ASCII representation of an unsigned long long integer
libowfat_fmt_xlong(3), fmt_xlong(3): write a hexadecimal ASCII representation of an unsigned long integer
libowfat_fmt_xlonglong(3), fmt_xlonglong(3): write a hexadecimal ASCII representation of an unsigned long long integer
libowfat_io_canwrite(3), io_canwrite(3): return a file descriptor that can be written to
libowfat_io_dontwantwrite(3), io_dontwantwrite(3): signal that you do not want to write to a descriptor
libowfat_io_fd_canwrite(3), io_fd_canwrite(3): prepare descriptor for io_wait
libowfat_io_readwritefile(3), io_readfile(3): open a file for reading and writing
libowfat_io_trywrite(3), io_trywrite(3): write to a descriptor without blocking
libowfat_io_trywritetimeout(3), io_trywritetimeout(3): write to a descriptor without blocking
libowfat_io_wantwrite(3), io_wantwrite(3): signal that you want to write to a descriptor
libowfat_iob_write(3), iob_write(3): send I/O batch through callback
libowfat_open_write(3), open_write(3): open a file for writing
libowfat_uint16_pack(3), uint16_pack(3): write an unsigned little-endian 16-bit integer
libowfat_uint16_pack_big(3), uint16_pack_big(3): write an unsigned big-endian 16-bit integer
libowfat_uint32_pack(3), uint32_pack(3): write an unsigned little-endian 32-bit integer
libowfat_uint32_pack_big(3), uint32_pack_big(3): write an unsigned big-endian 32-bit integer
libowfat_uint64_pack(3), uint64_pack(3): write an unsigned little-endian 64-bit integer
libowfat_uint64_pack_big(3), uint64_pack_big(3): write an unsigned big-endian 64-bit integer
libpbm(3): libnetpbm functions to read and write PBM image files synopsis
libpgm(3): libnetpbm functions to read and write PGM image files synopsis
libpnm(3): libnetpbm functions to read and write PNM image files synopsis
libqcow(3), libqcow.h(3): Library to access the QEMU Copy-On-Write (QCOW) image file format
libssh2_channel_window_write(3): convenience macro for libssh2_channel_window_write_ex(3) calls
libssh2_channel_window_write_ex(3): Check the status of the write window
libssh2_channel_write(3): convenience macro for libssh2_channel_write_ex(3)
libssh2_channel_write_ex(3): write data to a channel stream blocking
libssh2_channel_write_stderr(3): convenience macro for libssh2_channel_write_ex(3)
libssh2_knownhost_writefile(3): write a collection of known hosts to a file
libssh2_knownhost_writeline(3): convert a known host to a line for storage
libssh2_sftp_seek(3): set the read/write position indicator within a file
libssh2_sftp_seek64(3): set the read/write position within a file
libssh2_sftp_tell(3): get the current read/write position indicator for a file
libssh2_sftp_tell64(3): get the current read/write position indicator for a file
libssh2_sftp_write(3): write SFTP data
lis_output(3): write the matrix and vector data
lis_output(3f): write the matrix and vector data
lis_output_matrix(3): write the matrix data
lis_output_matrix(3f): write the matrix data
lis_output_vector(3): write the vector data
lis_output_vector(3f): write the vector data
lzss_write(3): Compresses data using LZSS. Allegro game programming library
mad_new(3), mad_read(3), mad_write(3), mad_get_version(3), mad_set_version(3), mad_get_card_publisher_sector(3), mad_set_card_publisher_sector(3), mad_get_aid(3), mad_set_aid(3), mad_free(3): Mifare Application Directory (MAD) Manipulation Functions
maildir(1): safely write data to a qmail-style maildir
mconv_encode_stream(3m17n): Encode an M-text to write to a stream
mconv_putc(3m17n): Write a character via a code converter
mhfixmsg(1): nmh's MIME-email rewriter with various transformations
mib2c.conf(5): How to write mib2c.conf files to do ANYTHING based on MIB input
mifare_application_alloc(3), mifare_application_find(3), mifare_application_free(3), mifare_application_read(3), mifare_application_write(3): Mifare Applications Manipulation Functions
mifare_classic_connect(3), mifare_classic_disconnect(3), mifare_classic_authenticate(3), mifare_classic_read(3), mifare_classic_init_value(3), mifare_classic_read_value(3), mifare_classic_write(3), mifare_classic_increment(3), mifare_classic_decrement(3), mifare_classic_restore(3), mifare_classic_transfer(3), mifare_classic_get_trailer_block_permission(3), mifare_classic_get_data_block_permission(3), mifare_classic_format_sector(3), mifare_classic_trailer_block(3), mifare_classic_block_sector(3), mifare_classic_sector_first_block(3), mifare_classic_sector_block_count(3), mifare_classic_sector_last_block(3): Mifare Classic Manipulation Functions
mifare_desfire_connect(3), mifare_desfire_disconnect. mifare_desfire_authenticate(3), mifare_desfire_authenticate_aes(3), mifare_desfire_authenticate_iso(3), mifare_desfire_change_key_settings(3), mifare_desfire_get_key_settings(3), mifare_desfire_change_key(3), mifare_desfire_get_key_version(3), mifare_desfire_create_application(3), mifare_desfire_create_application_3k3des(3), mifare_desfire_create_application_aes(3), mifare_desfire_create_application_iso(3), mifare_desfire_create_application_3k3des_iso(3), mifare_desfire_create_application_aes_iso(3), mifare_desfire_delete_application(3), mifare_desfire_get_application_ids(3), mifare_desfire_free_application_ids(3), mifare_desfire_get_df_names(3), mifare_desfire_select_application(3), mifare_desfire_format_picc(3), mifare_desfire_get_version(3), mifare_desfire_free_mem(3), mifare_desfire_set_configuration(3), mifare_desfire_set_default_key(3), mifare_desfire_set_ats(3), mifare_desfire_get_card_uid(3), mifare_desfire_get_file_ids(3), mifare_desfire_get_iso_file_ids(3), mifare_desfire_get_file_settings(3), mifare_desfire_change_file_settings(3), mifare_desfire_create_std_data_file(3), mifare_desfire_create_std_data_file_iso(3), mifare_desfire_create_backup_data_file(3), mifare_desfire_create_backup_data_file_iso(3), mifare_desfire_create_value_file(3), mifare_desfire_create_linear_record_file(3), mifare_desfire_create_linear_record_file_iso(3), mifare_desfire_create_cyclic_record_file(3), mifare_desfire_create_cyclic_record_file_iso(3), mifare_desfire_delete_file(3), mifare_desfire_read_data(3), mifare_desfire_read_data_ex(3), mifare_desfire_write_data(3), mifare_desfire_write_data_ex(3), mifare_desfire_get_value(3), mifare_desfire_get_value_ex(3), mifare_desfire_credit(3), mifare_desfire_credit_ex(3), mifare_desfire_debit(3), mifare_desfire_debit_ex(3), mifare_desfire_limited_credit(3), mifare_desfire_limited_credit_ex(3), mifare_desfire_write_record(3), mifare_desfire_write_record_ex(3), mifare_desfire_read_records(3), mifare_desfire_read_records_ex(3), mifare_desfire_clear_record_file(3), mifare_desfire_commit_transaction(3), mifare_desfire_abort_transaction(3): Mifare DESFire Manipulation Functions
mifare_ultralight_connect(3), mifare_ultralight_disconnect(3), mifare_ultralight_read(3), mifare_ultralight_write(3): Mifare UltraLight Manipulation Functions
modbus_mask_write_register(3): mask a single register
modbus_write_and_read_registers(3): write and read many registers in a single transaction
modbus_write_bit(3): write a single bit
modbus_write_bits(3): write many bits
modbus_write_register(3): write a single register
modbus_write_registers(3): write many registers
mogrify(1): resize an image, blur, crop, despeckle, dither, draw on, flip, join, re-sample, and much more. Mogrify overwrites the original image file, whereas, convert(1) writes to a different image file
mstmwrite(1): manual page for mstmwrite <device> <addr> <value>
mtbl_writer(3): create an MTBL file
nbdkit-cow-filter(1): nbdkit copy-on-write (COW) filter
nbdkit-eval-plugin(1): write a shell script plugin on the command line
nbdkit-filter(3): how to write nbdkit filters
nbdkit-plugin(3): how to write nbdkit plugins
ne_ssl_cert_read(3), ne_ssl_cert_write(3), ne_ssl_cert_import(3), ne_ssl_cert_export(3): functions to read or write certificates to and from files or strings
ntfs-3g(8): Third Generation Read/Write NTFS Driver
ntfswipe(8): overwrite unused space on an NTFS volume
nvramtool(8): read/write coreboot-related information
open_nonblock(3), open_nonblock (3): Open a file in read or write mode for non-blocking I/O
overlay(3x), overwrite(3x), copywin(3x): overlay and manipulate overlapped curses windows
owdir(1), owread(1), owwrite(1), owget(1), owexist(1), owpresent(1): lightweight owserver access
pack_fputs(3): Writes a string to the stream. Allegro game programming library
pack_fwrite(3): Writes n bytes to the stream. Allegro game programming library
panda_close(3): write a PDF document out to disk
panda_dbwrite(3): write a value into the Panda internal database
panda_writeobject(3): write a given object to disc
panda_writetrailer(3): write out the trailer for the PDF document
panda_writexref(3): write out the table that lists object locations in the file
pcap-config(1): write libpcap compiler and linker flags to standard output
pcap_dump(3): write a packet to a capture file
pcap_dump_open(3), pcap_dump_open_append(3), pcap_dump_fopen(3): open a file to which to write packets
pem_password_cb(3), PEM_read_bio_PrivateKey(3), PEM_read_PrivateKey(3), PEM_write_bio_PrivateKey(3), PEM_write_bio_PrivateKey_traditional(3), PEM_write_PrivateKey(3), PEM_write_bio_PKCS8PrivateKey(3), PEM_write_PKCS8PrivateKey(3), PEM_write_bio_PKCS8PrivateKey_nid(3), PEM_write_PKCS8PrivateKey_nid(3), PEM_read_bio_PUBKEY(3), PEM_read_PUBKEY(3), PEM_write_bio_PUBKEY(3), PEM_write_PUBKEY(3), PEM_read_bio_RSAPrivateKey(3), PEM_read_RSAPrivateKey(3), PEM_write_bio_RSAPrivateKey(3), PEM_write_RSAPrivateKey(3), PEM_read_bio_RSAPublicKey(3), PEM_read_RSAPublicKey(3), PEM_write_bio_RSAPublicKey(3), PEM_write_RSAPublicKey(3), PEM_read_bio_RSA_PUBKEY(3), PEM_read_RSA_PUBKEY(3), PEM_write_bio_RSA_PUBKEY(3), PEM_write_RSA_PUBKEY(3), PEM_read_bio_DSAPrivateKey(3), PEM_read_DSAPrivateKey(3), PEM_write_bio_DSAPrivateKey(3), PEM_write_DSAPrivateKey(3), PEM_read_bio_DSA_PUBKEY(3), PEM_read_DSA_PUBKEY(3), PEM_write_bio_DSA_PUBKEY(3), PEM_write_DSA_PUBKEY(3), PEM_read_bio_Parameters(3), PEM_write_bio_Parameters(3), PEM_read_bio_DSAparams(3), PEM_read_DSAparams(3), PEM_write_bio_DSAparams(3), PEM_write_DSAparams(3), PEM_read_bio_DHparams(3), PEM_read_DHparams(3), PEM_write_bio_DHparams(3), PEM_write_DHparams(3), PEM_read_bio_X509(3), PEM_read_X509(3), PEM_write_bio_X509(3), PEM_write_X509(3), PEM_read_bio_X509_AUX(3), PEM_read_X509_AUX(3), PEM_write_bio_X509_AUX(3), PEM_write_X509_AUX(3), PEM_read_bio_X509_REQ(3), PEM_read_X509_REQ(3), PEM_write_bio_X509_REQ(3), PEM_write_X509_REQ(3), PEM_write_bio_X509_REQ_NEW(3), PEM_write_X509_REQ_NEW(3), PEM_read_bio_X509_CRL(3), PEM_read_X509_CRL(3), PEM_write_bio_X509_CRL(3), PEM_write_X509_CRL(3), PEM_read_bio_PKCS7(3), PEM_read_PKCS7(3), PEM_write_bio_PKCS7(3), PEM_write_PKCS7(3): PEM routines
pem_password_cb(3ossl), PEM_read_bio_PrivateKey_ex(3ossl), PEM_read_bio_PrivateKey(3ossl), PEM_read_PrivateKey_ex(3ossl), PEM_read_PrivateKey(3ossl), PEM_write_bio_PrivateKey_ex(3ossl), PEM_write_bio_PrivateKey(3ossl), PEM_write_bio_PrivateKey_traditional(3ossl), PEM_write_PrivateKey_ex(3ossl), PEM_write_PrivateKey(3ossl), PEM_write_bio_PKCS8PrivateKey(3ossl), PEM_write_PKCS8PrivateKey(3ossl), PEM_write_bio_PKCS8PrivateKey_nid(3ossl), PEM_write_PKCS8PrivateKey_nid(3ossl), PEM_read_bio_PUBKEY_ex(3ossl), PEM_read_bio_PUBKEY(3ossl), PEM_read_PUBKEY_ex(3ossl), PEM_read_PUBKEY(3ossl), PEM_write_bio_PUBKEY_ex(3ossl), PEM_write_bio_PUBKEY(3ossl), PEM_write_PUBKEY_ex(3ossl), PEM_write_PUBKEY(3ossl), PEM_read_bio_RSAPrivateKey(3ossl), PEM_read_RSAPrivateKey(3ossl), PEM_write_bio_RSAPrivateKey(3ossl), PEM_write_RSAPrivateKey(3ossl), PEM_read_bio_RSAPublicKey(3ossl), PEM_read_RSAPublicKey(3ossl), PEM_write_bio_RSAPublicKey(3ossl), PEM_write_RSAPublicKey(3ossl), PEM_read_bio_RSA_PUBKEY(3ossl), PEM_read_RSA_PUBKEY(3ossl), PEM_write_bio_RSA_PUBKEY(3ossl), PEM_write_RSA_PUBKEY(3ossl), PEM_read_bio_DSAPrivateKey(3ossl), PEM_read_DSAPrivateKey(3ossl), PEM_write_bio_DSAPrivateKey(3ossl), PEM_write_DSAPrivateKey(3ossl), PEM_read_bio_DSA_PUBKEY(3ossl), PEM_read_DSA_PUBKEY(3ossl), PEM_write_bio_DSA_PUBKEY(3ossl), PEM_write_DSA_PUBKEY(3ossl), PEM_read_bio_Parameters_ex(3ossl), PEM_read_bio_Parameters(3ossl), PEM_write_bio_Parameters(3ossl), PEM_read_bio_DSAparams(3ossl), PEM_read_DSAparams(3ossl), PEM_write_bio_DSAparams(3ossl), PEM_write_DSAparams(3ossl), PEM_read_bio_DHparams(3ossl), PEM_read_DHparams(3ossl), PEM_write_bio_DHparams(3ossl), PEM_write_DHparams(3ossl), PEM_read_bio_X509(3ossl), PEM_read_X509(3ossl), PEM_write_bio_X509(3ossl), PEM_write_X509(3ossl), PEM_read_bio_X509_AUX(3ossl), PEM_read_X509_AUX(3ossl), PEM_write_bio_X509_AUX(3ossl), PEM_write_X509_AUX(3ossl), PEM_read_bio_X509_REQ(3ossl), PEM_read_X509_REQ(3ossl), PEM_write_bio_X509_REQ(3ossl), PEM_write_X509_REQ(3ossl), PEM_write_bio_X509_REQ_NEW(3ossl), PEM_write_X509_REQ_NEW(3ossl), PEM_read_bio_X509_CRL(3ossl), PEM_read_X509_CRL(3ossl), PEM_write_bio_X509_CRL(3ossl), PEM_write_X509_CRL(3ossl), PEM_read_bio_PKCS7(3ossl), PEM_read_PKCS7(3ossl), PEM_write_bio_PKCS7(3ossl), PEM_write_PKCS7(3ossl): PEM routines
pfsin(1): Read an image in one of the several formats and write pfs stream to the standard output
pfsindcraw(1): Read an image in a camera RAW file format supported by DCRAW and write pfs stream to the standard output
pfsout(1): Read pfs frames from stdin and write them in the format determined by the extension of the file name
pfsoutpfm(1): Write images or frames in OpenEXR format
pfsoutppm(1), pfsouttiff(1), pfsoutrgbe(1), pfsoutexr(1): Write images or frames in one of the several formats
pfsoutrgbe(1): Write images or frames in Radiance RGBE format
pfsoutyuv(1): Write frames to .yuv file used by many video codecs
pg_receivewal(1): stream write-ahead logs from a PostgreSQL server
pg_resetwal(1): reset the write-ahead log and other control information of a PostgreSQL database cluster
pg_waldump(1): display a human-readable rendering of the write-ahead log of a PostgreSQL database cluster
pkg_create(3), pkg_create_i(3), pkg_create_new(3), pkg_create_free(3), pkg_create_set_format(3), pkg_create_set_overwrite(3), pkg_create_set_compression_level(3), pkg_set_rootdir(3), pkg_set_output_dir(3), pkg_create_set_timestamp(3): create packages
pmemblk_read(3), pmemblk_read()(3), pmemblk_write()(3): read or write a block from a block memory pool
pmemlog_tell(3), pmemlog_tell()(3), pmemlog_rewind()(3), pmemlog_walk()(3): checks current write point for the log or walks through the log
post_form(3x), unpost_form(3x): write or erase forms from associated subwindows
post_menu(3x), unpost_menu(3x): write or erase menus from associated subwindows
psf2wof(1): convert part or all of a PSF font to Hercules WriteOn format
pspg(1): Postgres Pager Everybody who uses psql uses less pager. It is working well, but there is not any special support for tabular data. I found few projects, but no one was completed for this purpose. I decided to write some small specialized pager for usage as psql pager. This pager can be used from the following clients command line clients too: "[ci]" 4 mysql "[ci]" 4 sqlite "[ci]" 4 pgcli https://github.com/dbcli/pgcli/ "[ci]" 4 monetdb "[ci]" 4 Trino (formerly Presto SQL) https://trino.io/ "[ci]" 4 usql https://github.com/xo/usql/ "[ci]" 4 sqlcl https://github.com/okbob/pspg/#sqlcl (for oracle) "" 0
putpixel(3): Writes a pixel into a bitmap. Allegro game programming library
puts.tcl85(n), puts(n): Write to a channel
puts.tcl86(n), puts(n): Write to a channel
puts.tcl87(n), puts(n): Write to a channel
qcowinfo(1): determines information about a QEMU Copy-On-Write (QCOW) image file
qdirstat-cache-writer(1): script to write QDirStat cache files from cron jobs
rasqlinsert(1): write argus(8) data into mysql database tables
readom(1): read or write data Compact Discs
rle_puteof(3): write an end of image to an RLE file
rle_putraw(3): write run length encoded data to an RLE file
rle_putrow(3): Write a row (scanline) of data to an RLE file
rpp(3), rpp_open(3), rpp_bind(3), rpp_poll(3), rpp_io(3), rpp_read(3), rpp_write(3), rpp_close(3), rpp_getaddr(3), rpp_flush(3), rpp_terminate(3), rpp_shutdown(3), rpp_rcommit(3), rpp_wcommit(3), rpp_eom(3), rpp_getc(3), rpp_putc(3): reliable packet protocol
rrdbot-create(8), rddbot-create(8): create the RRD files for rrdbotd(8) to write values to
rrdbotd(8), rddbotd(8): an SNMP poller which writes to an round robin database
rwarray(3am), writea(3am), reada(3am), writeall(3am), readall(3am): write and read gawk arrays to/from files
safecat(1): safely write data to a file
save_sample(3): Writes a sample into a file. Allegro game programming library
sc_StateOutFile(3), sc::StateOutFile(3): Writes state information to files
sc_StateOutText(3), sc::StateOutText(3): Writes out state information in an almost human readable format
sc_warts2pcap(1): write packets included in warts object to a pcap file
scr_dump(3x), scr_restore(3x), scr_init(3x), scr_set(3x): read (write) a curses screen from (to) a file
scrub(1): write patterns on disk/file
serdi(1): read and write RDF syntax
set.tcl85(n), set(n): Read and write variables
set.tcl86(n), set(n): Read and write variables
set.tcl87(n), set(n): Read and write variables
set_config_float(3): Writes a float in the configuration file. Allegro game programming library
set_config_hex(3): Writes a hexadecimal integer in the configuration file. Allegro game programming library
set_config_id(3): Writes a driver ID in the configuration file. Allegro game programming library
set_config_int(3): Writes an integer in the configuration file. Allegro game programming library
set_config_string(3): Writes a string in the configuration file. Allegro game programming library
set_write_alpha_blender(3): Enables the special alpha-channel editing mode. Allegro game programming library
sg_compare_and_write(8): send the SCSI COMPARE AND WRITE command
sg_reset_wp(8): send SCSI RESET WRITE POINTER command
sg_wr_mode(8): write (modify) SCSI mode page
sg_write_buffer(8): send SCSI WRITE BUFFER commands
sg_write_long(8): send SCSI WRITE LONG command
sg_write_same(8): send SCSI WRITE SAME command
sg_write_verify(8), sg_write_and_verify(8): send the SCSI WRITE AND VERIFY command
sg_write_x(8): SCSI WRITE normal/ATOMIC/SAME/SCATTERED/STREAM, ORWRITE commands
slapo-rwm(5): rewrite/remap overlay to slapd
smi_node(3), smiGetNode(3), smiGetNodeByOID(3), smiGetFirstNode(3), smiGetNextNode(3), smiGetParentNode(3), smiGetRelatedNode(3), smiGetFirstChildNode(3), smiGetNextChildNode(3), smiGetNodeModule(3), smiGetNodeType(3), smiGetNodeLine(3), smiGetFirstElement(3), smiGetNextElement(3), smiGetElementNode(3), smiGetFirstOption(3), smiGetNextOption(3), smiGetOptionNode(3), smiGetFirstRefinement(3), smiGetNextRefinement(3), smiGetRefinementModule(3), smiGetRefinementNode(3), smiGetRefinementType(3), smiGetRefinementWriteType(3): SMI type information routines
smp_write_gpio(8): invoke WRITE GPIO REGISTER (ENHANCED) SMP function
source-highlight-settings(1), Source-highlight-settings(1): utility that can be used to write a configuration file for GNU Source-highlight (and its library)
storeid_file_rewrite(8), storeid_file_rewrite(8): File based Store-ID helper for Squid
tap(3): write tests that implement the Test Anything Protocol
tar_block_read(3), tar_block_write(3): macros to call read and write functions for the correct tar archive type
tcprewrite(1), *[B-Font]tcprewrite(1): Rewrite the packets in a pcap file
textout_centre_ex(3): Writes a centered string on a bitmap. Allegro game programming library
textout_ex(3): Writes a string on a bitmap. Allegro game programming library
textout_right_ex(3): Writes a right aligned string on a bitmap. Allegro game programming library
th_read(3), th_write(3): read and write a file header block from a tar archive
tls_read(3), tls_write(3), tls_handshake(3), tls_error(3), tls_close(3), tls_reset(3): use a TLS connection
tpm2_nvwrite(1), tpm2_nvwrite(1)(1): Write data to a Non-Volatile (NV) index
tpm2_nvwritelock(1), tpm2_nvwritelock(1)(1): Lock the Non-Volatile (NV) index for further writes
tracker-writeback(1): Used to write metadata set in Tracker back to physical files
trivial-rewrite(8): Postfix address rewriting and resolving daemon
unclutter(1), unclutter-xfixes(1): rewrite of unclutter using the X11-Xfixes extension
url_lfs_rewrite(8), url_lfs_rewrite(8): a URL-rewriter based on local file existence
usprintf(3): Writes formatted data into a buffer. Allegro game programming library
uszprintf(3): Writes formatted data into a buffer, specifying size. Allegro game programming library
uvsprintf(3): Writes formatted data into a buffer, using variable arguments. Allegro game programming library
uvszprintf(3): Writes formatted data into a buffer, using size and variable arguments. Allegro game programming library
vfs_worm(8): disallows writes for older file
vga_oktowrite(3): indicates whether the program has direct access to the SVGA
vga_setwritepage(3): set the 64K SVGA page number
wall(1): write a message to all users
warning(3), warning (3): Write a string to the warning log output
wdwrite(1): writes keys and values to the defaults database
wmgenmenu(1): Writes a menu structure usable as ~/GNUstep/Defaults/WMRootMenu to stdout
wodim(1): write data to optical disk media
wof2psf(1): Convert a Hercules WriteOn font to PC Screen Font format
write(1): write to another user
write_rawresource(3), write_rawresource (3): Write a line from the globally shared raw resource handle
write_reading (3), fwrite_reading(3): Write a Read structure into a trace file
write_scf (3), fwrite_scf (3), write_scf_header(3): Write SCF files
writelog(8): Write or mail a log entry
xapian-metadata(1): Read and write user metadata
xdiff(3), xdl_set_allocator(3), xdl_malloc(3), xdl_free(3), xdl_realloc(3), xdl_init_mmfile(3), xdl_free_mmfile(3), xdl_mmfile_iscompact(3), xdl_seek_mmfile(3), xdl_read_mmfile(3), xdl_write_mmfile(3), xdl_writem_mmfile(3), xdl_mmfile_writeallocate(3), xdl_mmfile_ptradd(3), xdl_mmfile_first(3), xdl_mmfile_next(3), xdl_mmfile_size(3), xdl_mmfile_cmp(3), xdl_mmfile_compact(3), xdl_diff(3), xdl_patch(3), xdl_merge3(3), xdl_bdiff_mb(3), xdl_bdiff(3), xdl_rabdiff_mb(3), xdl_rabdiff(3), xdl_bdiff_tgsize(3), xdl_bpatch(3): File Differential Library support functions
xenstore-write(1): write Xenstore values
xo_set_writer(3): set custom writer functions for a libxo handle
xorriso(1): creates, loads, manipulates and writes ISO 9660 filesystem images with Rock Ridge extensions
z80-memory(3), init_banks(|)(3), reset_banks(|)(3), bank_port(|)(3), switch_bank(|)(3), clear_memory(|)(3), memory_at(|)(3), read_addr(|)(3), read_memo(|)(3), write_memo(|)(3), write_to_memory(!)(3), dma_write(|)(3), dma_read(|)(3): total memory access
zipnote(1): write the comments in zipfile to stdout, edit comments and rename files in zipfile
zpool-initialize(8): write to unallocated regions of ZFS storage pool
9p(1): read and write files on a 9P server
9pclient(3), CFid(3), CFsys(3), fsinit(3), fsmount(3), fsroot(3), fssetroot(3), fsunmount(3), nsinit(3), nsmount(3), fsversion(3), fsauth(3), fsattach(3), fsclose(3), fscreate(3), fsfcreate(3), fsremove(3), fsfremove(3), fsaccess(3), fsdirread(3), fsdirreadall(3), fsdirstat(3), fsdirfstat(3), fsdirwstat(3), fsdirfwstat(3), fsopen(3), fsfopen(3), nsopen(3), fsopenfd(3), fspread(3), fspwrite(3), fsread(3), fsreadn(3), fsseek(3), fswrite(3), fsprint(3), fsvprint(3): 9P client library
APR::ThreadRWLock(3): Perl API for APR thread read/write locks
AnyEvent::XMPP::Writer(3): "XML" writer for XMPP
Apache2::PerlSections(3): write Apache configuration files in Perl
Apache::Admin::Config(3): A module to read/write Apache like configuration files
Apache::Session::Store::PHP(3): writes to PHP4 builtin session files
App::Cmd(3): write command line apps with less suffering
App::local::lib::helper::rationale(3): Why write this?
Astro::Catalog::IO::VEX(3): Module to read/write sources in VEX format
Audio::Wav::Write(3): Module for writing Microsoft WAV files
Badger::Log::File(3): writes log messages to a log file
Bio::AlignIO::psi(3): Read/Write PSI-BLAST profile alignment files
Bio::FeatureIO::bed(3): read/write features from UCSC BED format
Bio::FeatureIO::gff(3): read/write GFF feature files
Bio::FeatureIO::gtf(3): read write features in GTF format
Bio::FeatureIO::ptt(3): read/write features in PTT format
Bio::FeatureIO::vecscreen_simple(3): read/write features from NCBI vecscreen -f 3 output
Bio::MAGETAB::Util::RewriteAE(3): A utility class providing methods to correct some common errors in ArrayExpress MAGE-TAB documents
Bio::MAGETAB::Util::Writer(3): Export of MAGE-TAB objects
Bio::MAGETAB::Util::Writer::ADF(3): Export of MAGE-TAB ArrayDesign objects
Bio::MAGETAB::Util::Writer::GraphViz(3): Visualization of MAGE-TAB objects
Bio::MAGETAB::Util::Writer::IDF(3): Export of MAGE-TAB Investigation objects
Bio::MAGETAB::Util::Writer::SDRF(3): Export of MAGE-TAB SDRF objects
Bio::MAGETAB::Util::Writer::Tabfile(3): Abstract MAGE-TAB exporter class
Bio::Phylo::Treedrawer::Abstract(3): Abstract graphics writer used by treedrawer, no serviceable parts inside
Bio::Phylo::Treedrawer::Canvas(3): Graphics format writer used by treedrawer, no serviceable parts inside
Bio::Phylo::Treedrawer::Gif(3): Graphics format writer used by treedrawer, no serviceable parts inside
Bio::Phylo::Treedrawer::Jpeg(3): Graphics format writer used by treedrawer, no serviceable parts inside
Bio::Phylo::Treedrawer::Pdf(3): Graphics format writer used by treedrawer, no serviceable parts inside
Bio::Phylo::Treedrawer::Png(3): Graphics format writer used by treedrawer, no serviceable parts inside
Bio::Phylo::Treedrawer::Processing(3): Graphics format writer used by treedrawer, no serviceable parts inside
Bio::Phylo::Treedrawer::Svg(3): Graphics format writer used by treedrawer, no serviceable parts inside
Bio::Phylo::Treedrawer::Swf(3): Graphics format writer used by treedrawer, no serviceable parts inside
Bio::SearchIO::SearchWriterI(3): Interface for outputting parsed Search results
Bio::SearchIO::Writer::GbrowseGFF(3): Interface for outputting parsed search results in Gbrowse GFF format
Bio::SearchIO::Writer::HSPTableWriter(3): Tab-delimited data for Bio::Search::HSP::HSPI objects
Bio::SearchIO::Writer::HTMLResultWriter(3): write a Bio::Search::ResultI in HTML
Bio::SearchIO::Writer::HitTableWriter(3): Tab-delimited data for Bio::Search::Hit::HitI objects
Bio::SearchIO::Writer::ResultTableWriter(3): Outputs tab-delimited data for each Bio::Search::Result::ResultI object
Bio::SearchIO::Writer::TextResultWriter(3): Object to implement writing a Bio::Search::ResultI in Text
Bio::SeqIO::game::gameWriter(3): -- a class for writing game-XML
Bio::SeqIO::tab(3): nearly raw sequence file input/output stream. Reads/writes id"et"sequence"en"
Bio::Tools::FootPrinter(3): write sequence features in FootPrinter format
Boulder::Stream(3): Read and write tag/value data from an input stream
Boulder::String(3): Read and write tag/value data from a string
CGI::Ex::Conf(3): Conf Reader/Writer for many different data format types
CPAN::Changes(3): Read and write Changes files
CPAN::Checksums(3): Write a "CHECKSUMS" file for a directory as on CPAN
CPAN::Meta::YAML(3): Read and write a subset of YAML for CPAN Meta files
CPAN::Reporter::History(3): Read or write a CPAN::Reporter history log
CPAN::Testers::Common::Client::History(3): read/write CPAN Testers' history file
CPANPLUS::Shell::Default::Plugins::HOWTO(3): -- documentation on how to write your own plugins
CSS::Inliner::Parser(3): Interface through which to read/write CSS files while respecting the cascade order NOTE: This sub-module very seriously focuses on respecting cascade order. As such this module is not for you if you want to modified a stylesheet once it's read. If you are looking for that functionality you may want to look at the sister module, CSS::Simple
CSS::Simple(3): Interface through which to read/write/manipulate CSS files while respecting the cascade order
CSS::Tiny(3): Read/Write .css files with as little code as possible
Catalyst::Plugin::Cache::Store(3): how to write a Cache store plugin
Catalyst::Response::Writer(3): Proxy over the PSGI Writer
Chart(3): A writer class for Excel Charts
Chemistry::File::Dumper(3): Read and write molecules via Data::Dumper
Chemistry::File::MDLMol(3): MDL molfile reader/writer
Chemistry::File::Mopac(3): MOPAC 6 input file reader/writer
Chemistry::File::PDB(3): Protein Data Bank file format reader/writer
Chemistry::File::SDF(3): MDL Structure Data File reader/writer
Chemistry::File::SLN(3): SLN linear notation parser/writer
Chemistry::File::SMILES(3): SMILES linear notation parser/writer
Chemistry::File::XYZ(3): XYZ molecule format reader/writer
Class::CSV(3): Class based CSV parser/writer
Config::INI::Writer(3): a subclassable .ini-file emitter
Config::Model::Annotation(3): Read and write configuration annotations
Config::Model::Backend::CdsFile(3): Read and write config as a Cds data structure
Config::Model::Backend::Fstab(3): Read and write config from fstab file
Config::Model::Backend::IniFile(3): Read and write config as a INI file
Config::Model::Backend::Json(3): Read and write config as a JSON data structure
Config::Model::Backend::PerlFile(3): Read and write config as a Perl data structure
Config::Model::Backend::PlainFile(3): Read and write config as plain file
Config::Model::Backend::ShellVar(3): Read and write config as a "SHELLVAR" data structure
Config::Model::Backend::Yaml(3): Read and write config as a YAML data structure
Config::Model::Role::FileHandler(3): role to read or write configuration files
Config::MySQL(3): Read and write MySQL-style configuration files
Config::MySQL::Writer(3): Write MySQL-style configuration files
Config::Properties(3): Read and write property files
Config::Tiny(3): Read/Write .ini style files with as little code as possible
Config::Wrest(3): Read and write Configuration data With References, Environment variables, Sections, and Templating
Convert::PEM(3): Read/write encrypted ASN.1 PEM files
Coro::RWLock(3): reader/write locks
Crypt::DSA::Key::PEM(3): Read/write DSA PEM files
Crypt::DSA::Key::SSH2(3): Read/write DSA SSH2 files
Crypt::PWSafe3(3): Read and write Passwordsafe v3 files
DBI::DBD(3): Perl DBI Database Driver Writer's Guide
DBIx::Class::Manual::Reading(3): How to read and write DBIx::Class POD
DBIx::Class::Migration::Script::Help::force_overwrite(3): overwrite an existing migration
DBIx::Class::MooseColumns(3): Lets you write DBIC add_column() definitions as attribute options
DBIx::Class::Schema::Loader::Optional::Dependencies(3), $class(3): Optional module dependency specifications (for module authors) EOC #@@ #@@ SYNOPSIS HEADING #@@ push @chunks, <<"EOC"; =head1 SYNOPSIS Somewhere in your build-file (e.g. ExtUtils::MakeMaker's Makefile.PL): ... e$EUMM_ARGS{CONFIGURE_REQUIRES} = { e%{ e$EUMM_ARGS{CONFIGURE_REQUIRES} || {} }, DBIx::Class::Schema::Loader => $distver, }; ... my %DBIC_CONFIG_AND_ORACLE_DEPS = %{ eval { require $class; $class->req_list_for([qw( dbicdump_config rdbms_oracle )]); } || {} }; e$EUMM_ARGS{PREREQ_PM} = { e%DBIC_CONFIG_AND_ORACLE_DEPS, e%{ e$EUMM_ARGS{PREREQ_PM} || {} }, }; ... ExtUtils::MakeMaker::WriteMakefile(e%EUMM_ARGS); Note: The eval protection within the example is due to support for requirements during the configure build phase not being available on a sufficient portion of production installations of Perl. Robust support for such dependency requirements is available in the CPAN installer only since version 1.94_56 first made available for production with perl version 5.12. It is the belief of the current maintainer that support for requirements during the configure build phase will not be sufficiently ubiquitous until the year 2020 at the earliest, hence the extra care demonstrated above. It should also be noted that some 3rd party installers (e.g. cpanminus) do the right thing with configure requirements independent from the versions of perl and CPAN available. EOC #@@ #@@ DESCRIPTION HEADING #@@ push @chunks, <<'EOC'; =head1 DESCRIPTION Some of the less-frequently used features of DBIx::Class::Schema::Loader have external module dependencies on their own. In order not to burden the average user with modules they will never use, these optional dependencies are not included in the base Makefile.PL. Instead an exception with a descriptive message is thrown when a specific feature can't find one or several modules required for its operation. This module is the central holding place for the current list of such dependencies, for DBIx::Class::Schema::Loader core authors, and DBIx::Class::Schema::Loader extension authors alike. Dependencies are organized in groups where each group can list one or more required modules, with an optional minimum version (or 0 for any version). In addition groups prefixed with test_ can specify a set of environment variables, some (or all) of which are marked as required for the group to be considered by req_list_for Each group name (or a combination thereof) can be used in the public methods as described below. EOC #@@ #@@ REQUIREMENT GROUPLIST HEADING #@@ push @chunks, '=head1 CURRENT REQUIREMENT GROUPS'; my $standalone_info; for my $group (sort keys %$dbic_reqs) { my $info = $standalone_info->{$group} ||= $class->_groups_to_reqs($group); next unless ( $info->{modreqs_fully_documented} and ( $info->{augments} or $info->{modreqs} ) ); my $p = $dbic_reqs->{$group}{pod}; push @chunks, ( "=head2 $p->{title}", "=head3 $group", $p->{desc}, =over, ); if ( keys %{ $info->{modreqs}||{} } ) { push @chunks, map { "=item * $_" . ($info->{modreqs}{$_} ? " >= $info->{modreqs}{$_}" : ) } ( sort keys %{ $info->{modreqs} } ) ; } else { push @chunks, =item * No standalone requirements, } push @chunks, =back; for my $ag ( sort keys %{ $info->{augments} || {} } ) { my $ag_info = $standalone_info->{$ag} ||= $class->_groups_to_reqs($ag); my $newreqs = $class->modreq_list_for([ $group, $ag ]); for (keys %$newreqs) { delete $newreqs->{$_} if ( ( defined $info->{modreqs}{$_} and $info->{modreqs}{$_} == $newreqs->{$_} ) or ( defined $ag_info->{modreqs}{$_} and $ag_info->{modreqs}{$_} == $newreqs->{$_} ) ); } if (keys %$newreqs) { push @chunks, ( "Combined with L</$ag> additionally requires:", =over, ( map { "=item * $_" . ($newreqs->{$_} ? " >= $newreqs->{$_}" : ) } ( sort keys %$newreqs ) ), =back, ); } } } #@@ #@@ API DOCUMENTATION HEADING #@@ push @chunks, <<'EOC';
DBIx::DBHResolver::Strategy::List(3): write short description for DBIx::DBHResolver::Strategy::List
DBIx::DBSchema::DBD(3): DBIx::DBSchema Driver Writer's Guide and Base Class
DBIx::DataSource::Driver(3): Driver Writer's Guide and base class
Data::Buffer(3): Read/write buffer class
Data::Stag::DTDWriter(3), Data::Stag::DTDWriter(3): DTD Writer
Data::Stag::ITextWriter(3), Data::Stag::ITextWriter(3): writes stag events into stag IText format
Data::Stag::IndentWriter(3), Data::Stag::IndentWriter(3): writes stag events into stag indent format
Data::Stag::JSONWriter(3), Data::Stag::JSONWriter(3): writes stag events into JSON files
Data::Stag::PerlWriter(3), Data::Stag::PerlWriter(3): writes stag events into perl POD documentation
Data::Stag::SxprWriter(3), Data::Stag::SxprWriter(3): writes Stag S-expression format
Data::Stag::Writer(3), Data::Stag::Writer(3): base class for all Writers
Data::Stag::XMLWriter(3), Data::Stag::XMLWriter(3): writes stag events into XML files
DateTime::Format::Natural::Rewrite(3): Aliasing and rewriting of date strings
Devel::AssertOS::Extending(3): how to write Devel::AssertOS::* modules that check what platform they're running on
Devel::MAT::Dumper(3), "Devel::MAT::Dumper"(3): write a heap dump file for later analysis
Dist::Zilla::Plugin::ExtraTests(3): rewrite ./xt tests to ./t tests with skips
Event(3), Win(3), eventfmt(3), newwin(3), pipetowin(3), pipewinto(3), sysrun(3), winaddr(3), winclosefiles(3), winctl(3), windel(3), windeleteall(3), windows(3), wineventchan(3), winfd(3), winfree(3), winmread(3), winname(3), winopenfd(3), winprint(3), winread(3), winreadaddr(3), winreadevent(3), winseek(3), winwrite(3), winwriteevent(3): acme client library
Excel::Writer::XLSX(3): Create a new file in the Excel 2007+ XLSX format
Excel::Writer::XLSX::Chart::Area(3), Area(3): A class for writing Excel Area charts
Excel::Writer::XLSX::Chart::Bar(3), Bar(3): A class for writing Excel Bar charts
Excel::Writer::XLSX::Chart::Column(3), Column(3): A class for writing Excel Column charts
Excel::Writer::XLSX::Chart::Doughnut(3), Doughnut(3): A class for writing Excel Doughnut charts
Excel::Writer::XLSX::Chart::Line(3), Line(3): A class for writing Excel Line charts
Excel::Writer::XLSX::Chart::Pie(3), Pie(3): A class for writing Excel Pie charts
Excel::Writer::XLSX::Chart::Radar(3), Radar(3): A class for writing Excel Radar charts
Excel::Writer::XLSX::Chart::Scatter(3), Scatter(3): A class for writing Excel Scatter charts
Excel::Writer::XLSX::Chart::Stock(3), Stock(3): A class for writing Excel Stock charts
Excel::Writer::XLSX::Chartsheet(3), Chartsheet(3): A class for writing the Excel XLSX Chartsheet files
Excel::Writer::XLSX::Drawing(3), Drawing(3): A class for writing the Excel XLSX drawing.xml file
Excel::Writer::XLSX::Examples(3), Examples(3): Excel::Writer::XLSX example programs
Excel::Writer::XLSX::Format(3), Format(3): A class for defining Excel formatting
Excel::Writer::XLSX::Package::App(3), App(3): A class for writing the Excel XLSX app.xml file
Excel::Writer::XLSX::Package::Comments(3), Comments(3): A class for writing the Excel XLSX Comments files
Excel::Writer::XLSX::Package::ContentTypes(3): A class for writing the Excel XLSX [Content_Types] file
Excel::Writer::XLSX::Package::Core(3), Core(3): A class for writing the Excel XLSX core.xml file
Excel::Writer::XLSX::Package::Custom(3), Custom(3): A class for writing the Excel XLSX custom.xml file
Excel::Writer::XLSX::Package::Metadata(3), Metadata(3): A class for writing the Excel XLSX metadata.xml file
Excel::Writer::XLSX::Package::Packager(3), Packager(3): A class for creating the Excel XLSX package
Excel::Writer::XLSX::Package::Relationships(3), Relationships(3): A class for writing the Excel XLSX Rels file
Excel::Writer::XLSX::Package::SharedStrings(3), SharedStrings(3): A class for writing the Excel XLSX sharedStrings.xml file
Excel::Writer::XLSX::Package::Styles(3), Styles(3): A class for writing the Excel XLSX styles file
Excel::Writer::XLSX::Package::Table(3), Table(3): A class for writing the Excel XLSX Table file
Excel::Writer::XLSX::Package::Theme(3), Theme(3): A class for writing the Excel XLSX Theme file
Excel::Writer::XLSX::Package::VML(3), VML(3): A class for writing the Excel XLSX VML files
Excel::Writer::XLSX::Package::XMLwriter(3), XMLwriter(3): A base class for the Excel::Writer::XLSX writer classes
Excel::Writer::XLSX::Shape(3), Shape(3): A class for creating Excel Drawing shapes
Excel::Writer::XLSX::Utility(3), Utility(3): Helper functions for Excel::Writer::XLSX
Excel::Writer::XLSX::Workbook(3), Workbook(3): A class for writing Excel Workbooks
Excel::Writer::XLSX::Worksheet(3), Worksheet(3): A class for writing Excel Worksheets
ExtUtils::Manifest(3): Utilities to write and check a MANIFEST file
ExtUtils::Miniperl(3): write the C code for miniperlmain.c and perlmain.c
ExtUtils::Mksymlists(3): write linker options files for dynamic extension
ExtUtils::Typemaps(3): Read/Write/Modify Perl/XS typemap files
FFI::Platypus(3): Write Perl bindings to non-Perl libraries with FFI. No XS required
FLV::AMFWriter(3): Wrapper for the AMF::Perl serializer
Feersum::Connection::Handle(3): PSGI-style reader/writer objects
File::Dir::Dumper::Stream::JSON::Writer(3): writer for a stream of JSON data
File::Write::Rotate(3): Write to files that archive/rotate themselves
Font::TTF::AATutils(3): Utility functions for AAT tables n .SS "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" .SS "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" Subsection "($classes, $states) = AAT_read_subtable($fh, $baseOffset, $subtableStart, $limits)" n .SS "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" .SS "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" Subsection "$length = AAT_write_state_table($fh, $classes, $states, $numExtraTables, $packEntry)" $packEntry is a subroutine for packing an entry into binary form, called as $dat = $packEntry($entry, $entryTable, $numEntries) where the entry is a comma-separated list of nextStateOffset, flags, actions n .SS "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" .SS "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" Subsection "($classes, $states, $entries) = AAT_read_state_table($fh, $numActionWords)" n .SS "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" .SS "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" Subsection "($format, $lookup) = AAT_read_lookup($fh, $valueSize, $length, $default)" n .SS "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)" .SS "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)" Subsection "AAT_write_lookup($fh, $format, $lookup, $valueSize, $default)"
Font::TTF::Mort::Chain(3): Chain Mort subtable for AAT n .SS "$t->new" .SS "$t->new" Subsection "$t->new" n .SS "$t->read($fh)" .SS "$t->read($fh)" Subsection "$t->read($fh)" Reads the chain into memory n .SS "$t->out($fh)" .SS "$t->out($fh)" Subsection "$t->out($fh)" Writes the table to a file either from memory or by copying n .SS "$t->print($fh)" .SS "$t->print($fh)" Subsection "$t->print($fh)" Prints a human-readable representation of the chain
Forest::Tree::Writer(3): An abstract role for tree writers
Forest::Tree::Writer::ASCIIWithBranches(3): A slightly more complex ASCII writer
Forest::Tree::Writer::SimpleASCII(3): A simple ASCII writer for Forest::Tree heirarchies
Forest::Tree::Writer::SimpleHTML(3): A simple HTML writer for Forest::Tree heirarchies
Fuse(3): write filesystems in Perl using FUSE
Fuse::Simple(3): Simple way to write filesystems in Perl using FUSE
Genezzo::Plan::QueryRewrite(3): Perform checks on relational algebra representation
Gimp(3): Write GIMP extensions/plug-ins/load- and save-handlers in Perl
Goo::Logger(3): Write a message to the log
Goo::Thing::gml::Writer(3): Write a Goo Markup Language (GML) Thing
Graph::ReadWrite(3): modules for reading and writing directed graphs
Graph::Writer(3): base class for Graph file format writers
Graph::Writer::Dot(3): write out directed graph in Dot format
Graph::Writer::GraphViz(3): GraphViz Writer for Graph object
Graph::Writer::HTK(3): write a perl Graph out as an HTK lattice file
Graph::Writer::VCG(3): write out directed graph in VCG format
Graph::Writer::XML(3): write out directed graph as XML
Graph::Writer::daVinci(3): write out directed graph in daVinci format
Gungho::Handler::FileWriter::Simple(3): Write Out Fetched Contents To File
HTML::RewriteAttributes(3): concise attribute rewriting
HTML::RewriteAttributes::Links(3): concise link rewriting
HTML::RewriteAttributes::Resources(3): concise resource-link rewriting
HTTP::Engine::Middleware::AccessLog(3): write access log
IO::Async::SSLStream(3), "IO::Async::SSLStream"(3): read and write buffers around an SSL connection
IO::Async::Stream(3), "IO::Async::Stream"(3): event callbacks and write bufering for a stream filehandle
IO::AtomicFile(3): write a file which is updated atomically
IO::Compress::Brotli(3): Write Brotli buffers/streams
IO::Compress::Bzip2(3): Write bzip2 files/buffers
IO::Compress::Deflate(3): Write RFC 1950 files/buffers
IO::Compress::Gzip(3): Write RFC 1952 files/buffers
IO::Compress::Lzf(3): Write lzf files/buffers
IO::Compress::Lzip(3): Write lzip files/buffers
IO::Compress::Lzma(3): Write lzma files/buffers
IO::Compress::Lzop(3): Write lzop files/buffers
IO::Compress::RawDeflate(3): Write RFC 1951 files/buffers
IO::Compress::Xz(3): Write xz files/buffers
IO::Compress::Zip(3): Write zip files/buffers
IO::Socket::Timeout(3): IO::Socket with read/write timeout
IO::YAML(3): read and write YAML streams incrementally
IPC::Run3::ProfLogger(3): write profiling data to a log file
Image::ExifTool(3): Read and write meta information
Image::ExifTool::AFCP(3): Read/write AFCP trailer
Image::ExifTool::CanonCustom(3): Read and Write Canon custom functions
Image::ExifTool::CanonVRD(3): Read/write Canon VRD and DR4 information
Image::ExifTool::FLIF(3): Read/write FLIF meta information
Image::ExifTool::FotoStation(3): Read/write FotoWare FotoStation trailer
Image::ExifTool::FujiFilm(3): Read/write FujiFilm maker notes and RAF images
Image::ExifTool::GIF(3): Read and write GIF meta information
Image::ExifTool::InDesign(3): Read/write meta information in Adobe InDesign files
Image::ExifTool::MIE(3): Read/write MIE meta information
Image::ExifTool::MacOS(3): Read/write MacOS system tags
Image::ExifTool::MakerNotes(3): Read and write EXIF maker notes
Image::ExifTool::MinoltaRaw(3): Read/write Konica-Minolta RAW (MRW) information
Image::ExifTool::NikonCapture(3): Read/write Nikon Capture information
Image::ExifTool::NikonCustom(3): Read and Write Nikon custom settings
Image::ExifTool::PNG(3): Read and write PNG meta information
Image::ExifTool::PPM(3): Read and write PPM meta information
Image::ExifTool::PanasonicRaw(3): Read/write Panasonic/Leica RAW/RW2/RWL meta information
Image::ExifTool::PhotoMechanic(3): Read/write Photo Mechanic information
Image::ExifTool::Photoshop(3): Read/write Photoshop IRB meta information
Image::ExifTool::SonyIDC(3): Read/write Sony IDC information
Image::ExifTool::TagInfoXML(3): Read/write tag information XML database
Image::ExifTool::WriteCanonRaw(3), Image::ExifTool::WriteCanonRaw.pl(3): Write Canon RAW (CRW and CR2) information
Image::ExifTool::WriteExif(3), Image::ExifTool::WriteExif.pl(3): Write EXIF meta information
Image::ExifTool::WriteIPTC(3), Image::ExifTool::WriteIPTC.pl(3): Write IPTC meta information
Image::ExifTool::WritePDF(3), Image::ExifTool::WritePDF.pl(3): Write PDF meta information
Image::ExifTool::WritePNG(3), Image::ExifTool::WritePNG.pl(3): Write PNG meta information
Image::ExifTool::WritePhotoshop(3), Image::ExifTool::WritePhotoshop.pl(3): Write Photoshop IRB meta information
Image::ExifTool::WritePostScript(3), Image::ExifTool::WritePostScript.pl(3): Write PostScript meta information
Image::ExifTool::WriteQuickTime(3), Image::ExifTool::WriteQuickTime.pl(3): Write XMP to QuickTime (MOV and MP4) files
Image::ExifTool::WriteXMP(3), Image::ExifTool::WriteXMP.pl(3): Write XMP meta information
Image::ExifTool::Writer(3), Image::ExifTool::Writer.pl(3): ExifTool routines for writing meta information
Image::Magick(3): objected-oriented Perl interface to ImageMagick for default quantum (Q16HDRI). Use it to read, manipulate, or write an image or image sequence from within a Perl script
Imager::File::GIF(3): read and write GIF files
Imager::File::JPEG(3): read and write JPEG files
Imager::File::PNG(3): read and write PNG files
Imager::File::TIFF(3): read and write TIFF files
Inline(3): Write Perl Subroutines in Other Programming Languages
Inline::ASM(3): Write Perl Subroutines in assembler
Inline::CPP(3): Write Perl subroutines and classes in C++
Inline::Java(3): Write Perl classes in Java
Inline::Python(3): Write Perl subs and classes in Python
Inline::Tcl(3): Write Perl subroutines in Tcl
JLog::Writer(3): Perl extension for writing to a jlog journal
LaTeXML::Core::Rewrite(3), "LaTeXML::Core::Rewrite"(3): rewrite rules for modifying the XML document
Log::Dispatch::FileWriteRotate(3): Log to files that archive/rotate themselves, w/ File::Write::Rotate
MIDI(3): read, compose, modify, and write MIDI files
MP3::Tag::ID3v2(3): Read / Write ID3v2.3 tags from mp3 audio files
MPI_File_iwrite(3): Writes a file starting at the location specified by the individual file pointer (nonblocking, noncollective)
MPI_File_iwrite_all(3): Writes a file starting at the location specified by the individual file pointer (nonblocking, collective)
MPI_File_iwrite_at(3): Writes a file at an explicitly specified offset (nonblocking, noncollective)
MPI_File_iwrite_at_all(3): Writes a file at an explicitly specified offset (nonblocking, collective)
MPI_File_iwrite_shared(3): Writes a file using the shared file pointer (nonblocking, noncollective)
MPI_File_write(3): Writes a file starting at the location specified by the individual file pointer (blocking, noncollective)
MPI_File_write_all(3): Writes a file starting at the locations specified by individual file pointers (blocking, collective)
MPI_File_write_all_begin(3): Writes a file starting at the locations specified by individual file pointers; beginning part of a split collective routine (nonblocking)
MPI_File_write_all_end(3): Writes a file starting at the locations specified by individual file pointers; ending part of a split collective routine (blocking)
MPI_File_write_at(3): Writes a file at an explicitly specified offset (blocking, noncollective)
MPI_File_write_at_all(3): Writes a file at explicitly specified offsets (blocking, collective)
MPI_File_write_at_all_begin(3): Writes a file at explicitly specified offsets; beginning part of a split collective routine (nonblocking)
MPI_File_write_at_all_end(3): Writes a file at explicitly specified offsets; ending part of a split collective routine (blocking)
MPI_File_write_ordered(3): Writes a file at a location specified by a shared file pointer (blocking, collective)
MPI_File_write_ordered_begin(3): Writes a file at a location specified by a shared file pointer; beginning part of a split collective routine (nonblocking)
MPI_File_write_ordered_end(3): Writes a file at a location specified by a shared file pointer; ending part of a split collective routine (blocking)
MPI_File_write_shared(3): Writes a file using the shared file pointer (blocking, noncollective)
MPI_Pack_external(3): Writes data to a portable format
MPI_Pack_external_size(3): Calculates upper bound on space needed to write to a portable format
MPI_T_cvar_write(3): Write the value of a bound control variable
MPI_T_pvar_write(3): Write the value of a control variable
Mac::PropertyList::WriteBinary(3): pack data into a Mac "binary property list"
Mango::GridFS::Writer(3): GridFS writer
Marpa::PP::Rewrite(3): How Marpa Rewrites Grammars
Marpa::XS::Rewrite(3): How Marpa rewrites grammars
MaxMind::DB::Common(3): Code shared by the MaxMind DB reader and writer modules
MaxMind::DB::Writer(3): Create MaxMind DB database files
MaxMind::DB::Writer::Tree(3): Tree representing a MaxMind DB database in memory - then write it to a file
Metrics::Any::Adapter::File(3), "Metrics::Any::Adapter::File"(3): write metrics to a file
Metrics::Any::Adapter::Stderr(3), "Metrics::Any::Adapter::Stderr"(3): write metrics to "STDERR"
Mixin::Linewise(3): write your linewise code for handles; this does the rest
Mixin::Linewise::Writers(3): get linewise writers for strings and filenames
Mo::importer(3), Header "Name" Mo::importer(3): Write your own import() extension
MongoDB::BulkWrite(3): MongoDB bulk write interface
MongoDB::BulkWriteResult(3): MongoDB bulk write result document
MongoDB::BulkWriteView(3): Bulk write operations against a query document
MongoDB::WriteConcern(3): Encapsulate and validate a write concern
MooseX::App(3): Write user-friendly command line apps with even less suffering
MooseX::SemiAffordanceAccessor::Role::Attribute(3): This meta trait is applied to attributes in order to change writer names
MooseX::SetOnce(3): write-once, read-many attributes for Moose
Net::FastCGI::IO(3): Provides functions to read and write FastCGI messages
Net::Frame::Dump::Writer(3): tcpdump like implementation, writer mode
Net::LDAP::DSML(3): -- A DSML Writer for Net::LDAP
Net::SFTP::Buffer(3): Read/write buffer class
Net::SFTP::Foreign::Buffer(3): Read/write buffer class
Net::SIP::NATHelper::Base(3): rewrite SDP and transport RTP for NAT
Net::SSH::Perl::Buffer(3): Low-level read/write buffer class
Net::Write(3): a portable interface to open and send raw data to network
Net::Write::Layer(3): base class and constants
Net::Write::Layer2(3): object for a link layer (layer 2) descriptor
Net::Write::Layer3(3): object for a network layer (layer 3) descriptor
Net::Write::Layer4(3): object for a transport layer (layer 4) descriptor
Net::XMPP2::Writer(3): "XML" writer for XMPP
Net::vCard(3): Read and write vCard files (RFC 2426). vCard files hold personal information that you would typically find on a business card. Name, numbers, addresses, and even logos. This module can also serve as a base class for other vFile readers
Net::vFile(3): Generic module which can read and write "vFile" files such as vCard (RFC 2426) and vCalendar (RFC 2445). The result of loading this data is a collection of objects which will grant you easy access to the properties. Then the module can write your objects back to a data file
PDF::API3::Compat::API2::Basic::TTF::Mort::Chain(3): n .SS "$t->new" .SS "$t->new" Subsection "$t->new" n .SS "$t->read($fh)" .SS "$t->read($fh)" Subsection "$t->read($fh)" Reads the chain into memory n .SS "$t->out($fh)" .SS "$t->out($fh)" Subsection "$t->out($fh)" Writes the table to a file either from memory or by copying n .SS "$t->print($fh)" .SS "$t->print($fh)" Subsection "$t->print($fh)" Prints a human-readable representation of the chain
PDF::Writer(3): PDF writer abstraction layer
PDF::Writer::pdfapi2(3): PDF::API2 backend
PDF::Writer::pdflib(3): pdflib_pl backend
PDL::PP-Inline(1), Inline::Pdlpp(1): Write PDL Subroutines inline with PDL::PP
PDL::Philosophy(1): -- Why did we write PDL?
PHP::Session(3): read / write PHP session files
POE::Driver::SysRW(3): buffered, non-blocking I/O using sysread and syswrite
POE::Wheel::ReadWrite(3): non-blocking buffered I/O mix-in for POE::Session
POEx::Role::PSGIServer::ProxyWriter(3): Provides a push writer for PSGI applications to use
Paws::CloudDirectory::BatchWrite(3): Arguments for method BatchWrite on Paws::CloudDirectory
Paws::DynamoDB::BatchWriteItem(3): Arguments for method BatchWriteItem on Paws::DynamoDB
Paws::DynamoDB::TransactWriteItems(3): Arguments for method TransactWriteItems on Paws::DynamoDB
Paws::S3::WriteGetObjectResponse(3): Arguments for method WriteGetObjectResponse on Paws::S3
Paws::TimestreamWrite(3): Perl Interface to AWS Amazon Timestream Write
Paws::TimestreamWrite::CreateDatabase(3): Arguments for method CreateDatabase on Paws::TimestreamWrite
Paws::TimestreamWrite::CreateTable(3): Arguments for method CreateTable on Paws::TimestreamWrite
Paws::TimestreamWrite::DeleteDatabase(3): Arguments for method DeleteDatabase on Paws::TimestreamWrite
Paws::TimestreamWrite::DeleteTable(3): Arguments for method DeleteTable on Paws::TimestreamWrite
Paws::TimestreamWrite::DescribeDatabase(3): Arguments for method DescribeDatabase on Paws::TimestreamWrite
Paws::TimestreamWrite::DescribeEndpoints(3): Arguments for method DescribeEndpoints on Paws::TimestreamWrite
Paws::TimestreamWrite::DescribeTable(3): Arguments for method DescribeTable on Paws::TimestreamWrite
Paws::TimestreamWrite::ListDatabases(3): Arguments for method ListDatabases on Paws::TimestreamWrite
Paws::TimestreamWrite::ListTables(3): Arguments for method ListTables on Paws::TimestreamWrite
Paws::TimestreamWrite::ListTagsForResource(3): Arguments for method ListTagsForResource on Paws::TimestreamWrite
Paws::TimestreamWrite::TagResource(3): Arguments for method TagResource on Paws::TimestreamWrite
Paws::TimestreamWrite::UntagResource(3): Arguments for method UntagResource on Paws::TimestreamWrite
Paws::TimestreamWrite::UpdateDatabase(3): Arguments for method UpdateDatabase on Paws::TimestreamWrite
Paws::TimestreamWrite::UpdateTable(3): Arguments for method UpdateTable on Paws::TimestreamWrite
Paws::TimestreamWrite::WriteRecords(3): Arguments for method WriteRecords on Paws::TimestreamWrite
Pdlpp(3), Inline::Pdlpp(3): Write PDL Subroutines inline with PDL::PP
Perl::Critic::Policy::BuiltinFunctions::ProhibitStringyEval(3): Write "eval { my $foo; bar($foo) }" instead of "eval "my $foo; bar($foo);""
Perl::Critic::Policy::BuiltinFunctions::ProhibitStringySplit(3): Write "split /-/, $string" instead of "split -, $string"
Perl::Critic::Policy::BuiltinFunctions::ProhibitUniversalCan(3): Write "eval { $foo->can($name) }" instead of "UNIVERSAL::can($foo, $name)"
Perl::Critic::Policy::BuiltinFunctions::ProhibitUniversalIsa(3): Write "eval { $foo->isa($pkg) }" instead of "UNIVERSAL::isa($foo, $pkg)"
Perl::Critic::Policy::BuiltinFunctions::RequireBlockGrep(3): Write "grep { /$pattern/ } @list" instead of "grep /$pattern/, @list"
Perl::Critic::Policy::BuiltinFunctions::RequireBlockMap(3): Write "map { /$pattern/ } @list" instead of "map /$pattern/, @list"
Perl::Critic::Policy::ClassHierarchies::ProhibitOneArgBless(3): Write "bless {}, $class;" instead of just "bless {};"
Perl::Critic::Policy::CodeLayout::ProhibitParensWithBuiltins(3): Write "open $handle, $path" instead of "open($handle, $path)"
Perl::Critic::Policy::CodeLayout::ProhibitQuotedWordLists(3): Write "qw(foo bar baz)" instead of "(foo, bar, baz)"
Perl::Critic::Policy::ControlStructures::ProhibitCStyleForLoops(3): Write "for(0..20)" instead of "for($i=0; $i<=20; $i++)"
Perl::Critic::Policy::ControlStructures::ProhibitCascadingIfElse(3): Don't write long "if-elsif-elsif-elsif-elsif...else" chains
Perl::Critic::Policy::ControlStructures::ProhibitDeepNests(3): Don't write deeply nested loops and conditionals
Perl::Critic::Policy::ControlStructures::ProhibitPostfixControls(3): Write "if($condition){ do_something() }" instead of "do_something() if $condition"
Perl::Critic::Policy::ControlStructures::ProhibitUnlessBlocks(3): Write "if(! $condition)" instead of "unless($condition)"
Perl::Critic::Policy::ControlStructures::ProhibitUnreachableCode(3): Don't write code after an unconditional "die, exit, or next"
Perl::Critic::Policy::ControlStructures::ProhibitUntilBlocks(3): Write "while(! $condition)" instead of "until($condition)"
Perl::Critic::Policy::InputOutput::ProhibitBarewordFileHandles(3): Write "open my $fh, q{<}, $filename;" instead of "open FH, q{<}, $filename;"
Perl::Critic::Policy::InputOutput::ProhibitOneArgSelect(3): Never write "select($fh)"
Perl::Critic::Policy::InputOutput::ProhibitReadlineInForLoop(3): Write "while( $line = <> ){...}" instead of "for(<>){...}"
Perl::Critic::Policy::InputOutput::ProhibitTwoArgOpen(3): Write "open $fh, q{<}, $filename;" instead of "open $fh, "<$filename";"
Perl::Critic::Policy::InputOutput::RequireBracedFileHandleWithPrint(3): Write "print {$FH} $foo, $bar;" instead of "print $FH $foo, $bar;"
Perl::Critic::Policy::InputOutput::RequireCheckedClose(3): Write "my $error = close $fh;" instead of "close $fh;"
Perl::Critic::Policy::InputOutput::RequireCheckedOpen(3): Write "my $error = open $fh, $mode, $filename;" instead of "open $fh, $mode, $filename;"
Perl::Critic::Policy::InputOutput::RequireEncodingWithUTF8Layer(3): Write "open $fh, q{<:encoding(UTF-8)}, $filename;" instead of "open $fh, q{<:utf8}, $filename;"
Perl::Critic::Policy::Modules::RequireBarewordIncludes(3): Write "require Module" instead of "require Module.pm"
Perl::Critic::Policy::NamingConventions::ProhibitMixedCaseSubs(3): Write "sub my_function{}" instead of "sub MyFunction{}"
Perl::Critic::Policy::NamingConventions::ProhibitMixedCaseVars(3): Write "$my_variable = 42" instead of "$MyVariable = 42"
Perl::Critic::Policy::References::ProhibitDoubleSigils(3): Write "@{ $array_ref }" instead of "@$array_ref"
Perl::Critic::Policy::Subroutines::ProhibitSubroutinePrototypes(3): Don't write "sub my_function (@@) {}"
Perl::Critic::Policy::ValuesAndExpressions::ProhibitEmptyQuotes(3): Write "q{}" instead of ""
Perl::Critic::Policy::ValuesAndExpressions::ProhibitEscapedCharacters(3): Write ""eN{DELETE}"" instead of ""ex7F"", etc
Perl::Critic::Policy::ValuesAndExpressions::ProhibitLeadingZeros(3): Write "oct(755)" instead of "0755"
Perl::Critic::Policy::ValuesAndExpressions::ProhibitMixedBooleanOperators(3): Write " !$foo && $bar || $baz " instead of " not $foo && $bar or $baz"
Perl::Critic::Policy::ValuesAndExpressions::ProhibitSpecialLiteralHeredocTerminator(3): Don't write " print <<_|_END_|_ "
Perl::Critic::Policy::ValuesAndExpressions::RequireNumberSeparators(3): Write " 141_234_397.0145 " instead of " 141234397.0145 "
Perl::Critic::Policy::ValuesAndExpressions::RequireQuotedHeredocTerminator(3): Write " print <<THE_END " or " print <<"THE_END" "
Perl::Critic::Policy::ValuesAndExpressions::RequireUpperCaseHeredocTerminator(3): Write " <<THE_END; " instead of " <<theEnd; "
Perl::Critic::Policy::Variables::ProhibitAugmentedAssignmentInDeclaration(3): Do not write " my $foo .= bar; "
Perl::Critic::Policy::Variables::ProhibitConditionalDeclarations(3): Do not write " my $foo = $bar if $baz; "
Perl::Critic::Policy::Variables::ProhibitPunctuationVars(3): Write "$EVAL_ERROR" instead of "$@"
Perl::Critic::Policy::Variables::RequireInitializationForLocalVars(3): Write "local $foo = $bar;" instead of just "local $foo;"
Perl::Critic::Policy::Variables::RequireLexicalLoopIterators(3): Write "for my $element (@list) {...}" instead of "for $element (@list) {...}"
PerlIO::via::Timeout(3): a PerlIO layer that adds read & write timeout to a handle
Plack::Middleware::ConsoleLogger(3): Write logs to Firebug or Webkit Inspector
Plack::Middleware::Proxy::RewriteLocation(3): Rewrites redirect headers
Plack::Middleware::Rewrite(3): mod_rewrite for Plack
Plagger::Plugin::Filter::Regexp(3): Rewrite entry body using regular expression
Plagger::Plugin::Filter::RewriteEnclosureURL(3): Rewrite enclosure URL for republishing
Plucene::Index::DocumentWriter(3): the document writer
Plucene::Index::FieldsWriter(3): writes Fields to a Document
Plucene::Index::TermInfosWriter(3): write to the term infos file
Plucene::Index::Writer(3): write an index
Pod::Simple::Subclassing(3): -- write a formatter as a Pod::Simple subclass
Pod::WSDL::Writer(3): Writes XML output for Pod::WSDL (internal use only)
RDF::Simple(3): read and write RDF without complication
RGB(3), readcolmap(3), writecolmap(3): access display color map
RTF::Writer(3): for generating documents in Rich Text Format
RTF::Writer::TableRowDecl(3): class for RTF table settings
Reflex::Role::Writing(3): add buffered non-blocking syswrite() to a class
ResourcePool::ExtensionGuide(3): How to write extensions for ResourcePool
RevML::Writer(3): Write RevML files using the RevML DTD
SOAP::OutputStream(3): Writes SOAP fragments
SQL::Translator::Parser(3): describes how to write a parser
SQL::Translator::Producer(3): describes how to write a producer
SWF::BinStream(3): Read and write binary stream
SWF::BinStream::File(3): Read and write file as binary stream
Sphinx::Config(3): Sphinx search engine configuration file read/modify/write
Spreadsheet::ParseExcel::SaveParser(3): Rewrite an existing Excel file
Spreadsheet::WriteExcel(3): Write to a cross-platform Excel binary file
Spreadsheet::WriteExcel::BIFFwriter(3), BIFFwriter(3): An abstract base class for Excel workbooks and worksheets
Spreadsheet::WriteExcel::Big(3), Big(3): A class for creating Excel files > 7MB
Spreadsheet::WriteExcel::Chart::Area(3), Area(3): A writer class for Excel Area charts
Spreadsheet::WriteExcel::Chart::Bar(3), Bar(3): A writer class for Excel Bar charts
Spreadsheet::WriteExcel::Chart::Column(3), Column(3): A writer class for Excel Column charts
Spreadsheet::WriteExcel::Chart::External(3), External(3): A writer class for Excel external charts
Spreadsheet::WriteExcel::Chart::Line(3), Line(3): A writer class for Excel Line charts
Spreadsheet::WriteExcel::Chart::Pie(3), Pie(3): A writer class for Excel Pie charts
Spreadsheet::WriteExcel::Chart::Scatter(3), Scatter(3): A writer class for Excel Scatter charts
Spreadsheet::WriteExcel::Chart::Stock(3), Stock(3): A writer class for Excel Stock charts
Spreadsheet::WriteExcel::Examples(3), Examples(3): Spreadsheet::WriteExcel example programs
Spreadsheet::WriteExcel::Format(3), Format(3): A class for defining Excel formatting
Spreadsheet::WriteExcel::Formula(3), Formula(3): A class for generating Excel formulas
Spreadsheet::WriteExcel::FromXML(3): Create Excel Spreadsheet from XML
Spreadsheet::WriteExcel::OLEwriter(3), OLEwriter(3): A writer class to store BIFF data in a OLE compound storage file
Spreadsheet::WriteExcel::Properties(3), Properties(3): A module for creating Excel property sets
Spreadsheet::WriteExcel::Styler(3): Styles for formatting generated Excel files
Spreadsheet::WriteExcel::Utility(3), Utility(3): Helper functions for Spreadsheet::WriteExcel
Spreadsheet::WriteExcel::Workbook(3), Workbook(3): A writer class for Excel Workbooks
Spreadsheet::WriteExcel::Worksheet(3), Worksheet(3): A writer class for Excel Worksheets
Spreadsheet::WriteExcelXML(3): Create an Excel file in XML format
Spreadsheet::WriteExcelXML::Format(3), Format(3): A class for defining Excel formatting
Spreadsheet::WriteExcelXML::Utility(3), Utility(3): Helper functions for Spreadsheet::WriteExcelXML
Spreadsheet::WriteExcelXML::Workbook(3), Workbook(3): A writer class for Excel Workbooks
Spreadsheet::WriteExcelXML::Worksheet(3), Worksheet(3): A writer class for Excel Worksheets
Spreadsheet::WriteExcelXML::XMLwriter(3), XMLwriter(3): A base class for Excel workbooks and worksheets
String::RewritePrefix(3): rewrite strings based on a set of known prefixes
TAP::Parser::YAMLish::Writer(3): Write YAMLish data
Test2::Formatter::Stream(3): Test2 Formatter that directly writes events
Test2::Manual::Tooling::FirstTool(3): Write your first tool with Test2
Test2::Manual::Tooling::Formatter(3): How to write a custom formatter, in our case a JSONL formatter
Test2::Tools::Defer(3): Write tests that get executed at a later time
Test::Classy(3): write your unit tests in other modules than *.t
Test::Spec(3): Write tests in a declarative specification style
Test::TableDriven(3): write tests, not scripts that run them
Text::Authinfo(3): read, query and write authinfo files
Text::Filter(3): base class for objects that can read and write text lines
Text::MarkdownTable(3): Write Markdown syntax tables from data
Ubic::Run(3): really simple way to write init scripts
VCP::Filter::map(3): rewrite name, branch_id or delete revisions
WWW::Mechanize::Plugin::Cookbook(3): how to write plugins for WWW::Mechanize::Pluggable
WebService::GData::Base(3): core read/write methods over HTTP for google data API v2
WebService::GData::YouTube(3): Access YouTube contents(read/write) with API v2
WebService::GData::YouTube::Feed::Comment(3): a comment for a video (read/write) for data API v2
WebService::GData::YouTube::Feed::Complaint(3): add a complaint about a video (read/write) for data API v2
WebService::GData::YouTube::Feed::Friend(3): a user contact list (read/write) for data API v2
WebService::GData::YouTube::Feed::PlaylistLink(3): playlists meta data (read/write) for data API v2
WebService::GData::YouTube::Feed::Video(3): a Video YouTube contents(read/write) for data API v2
WebService::GData::YouTube::Feed::VideoMessage(3): a video message (read/write) for data API v2
XML::Atom::Syndication::Writer(3): a class for serializing XML::Atom::Syndication nodes into XML
XML::AutoWriter(3): DOCTYPE based XML output
XML::Compile::Translate::Writer(3): translate HASH to XML
XML::FeedPP(3): -- Parse/write/merge/edit RSS/RDF/Atom syndication feeds
XML::Handler::CanonXMLWriter(3): output XML in canonical XML format
XML::Handler::Composer(3): Another XML printer/writer/generator
XML::Handler::HTMLWriter(3): SAX Handler for writing HTML 4.0
XML::Handler::XMLWriter(3): a PerlSAX handler for writing readable XML
XML::Handler::YAWriter(3): Yet another Perl SAX XML Writer
XML::Rewrite(3): schema based XML cleanups
XML::Rewrite::Schema(3): transform schemas
XML::SAX::Writer(3): SAX2 XML Writer
XML::SAX::Writer::XML(3): XML::SAX::Writer's SAX Handler
XML::STX::Writer(3): a lightweight fallback SAX2 writer
XML::ValidWriter(3): DOCTYPE driven valid XML output
XML::Writer(3): Perl extension for writing XML documents
XMLTV(3): Perl extension to read and write TV listings in XMLTV format
XMLTV::Configure::Writer(3): Configuration file writer for XMLTV grabbers
YAML::PP::Writer(3): Write YAML output
YAML::PP::Writer::File(3): Write YAML output to file or file handle
YAML::Tiny(3): Read/Write YAML files with as little code as possible
accessors::classic(3): create 'classic' read/write accessor methods in caller's package
accessors::rw(3): create 'classic' read/write accessor methods in caller's package
allocimage(3), allocimagemix(3), freeimage(3), nameimage(3), namedimage(3), setalpha(3), loadimage(3), cloadimage(3), unloadimage(3), readimage(3), writeimage(3), bytesperline(3), wordsperline(3): allocating, freeing, reading, writing images
bio(3), Bopen(3), Bfdopen(3), Binit(3), Binits(3), Brdline(3), Brdstr(3), Bgetc(3), Bgetrune(3), Bgetd(3), Bungetc(3), Bungetrune(3), Bread(3), Bseek(3), Boffset(3), Bfildes(3), Blinelen(3), Bputc(3), Bputrune(3), Bprint(3), Bvprint(3), Bwrite(3), Bflush(3), Bterm(3), Bbuffered(3): buffered input/output
chartex(1): A utility to extract charts from an Excel file for insertion into a Spreadsheet::WriteExcel file
closeioproc(3), iocall(3), ioclose(3), iointerrupt(3), iodial(3), ioopen(3), ioproc(3), ioread(3), ioread9pmsg(3), ioreadn(3), iorecvfd(3), iosendfd(3), iosleep(3), iowrite(3): slave I/O processes for threaded programs
ctml_writer(1): process Cantera .cti input files
encoding(3): allows you to write your script in non-ASCII and non-UTF-8
exiftool(1): Read and write meta information in files
fifo(1): a fifo buffer that reads from stdin and writes to stdout
file_raise(3), file_raise()(3): controls raising of file_read_err and file_write_err
filewrite(3), filewrite()(3): writes into file
focuswriter(1): fullscreen word processor
g.dirseps(1), g.dirseps (1): Internal GRASS utility for converting directory separator characters. Converts any directory separator characters in the input string to or from native host format, and writes the changed path to standard output. Useful in scripts for Windows compatibility
ghostwriter(1): distraction-free text editor for Markdown
gmx-energy(1): Writes energies to xvg files and display averages
gmx-report-methods(1): Write short summary about the simulation setup to a text file and/or to the standard output
imsg_init(3), imsg_read(3), imsg_get(3), imsg_compose(3), imsg_composev(3), imsg_create(3), imsg_add(3), imsg_close(3), imsg_free(3), imsg_flush(3), imsg_clear(3), ibuf_open(3), ibuf_dynamic(3), ibuf_add(3), ibuf_reserve(3), ibuf_seek(3), ibuf_size(3), ibuf_left(3), ibuf_close(3), ibuf_write(3), ibuf_free(3), msgbuf_init(3), msgbuf_clear(3), msgbuf_write(3), msgbuf_drain(3): IPC messaging functions
ipsec_readwriteconf(8): validate and output an Libreswan IPsec configuration file
kcgi_buf_write(3): put binary data into a kcgi buffer
kcgi_writer_disable(3): disable further writer allocations
khtml_write(3): put content data for kcgihtml
khttp_write(3): write HTTP content data for kcgi
kitty.conf(5): kitty.conf Documentation kitty is highly customizable, everything from keyboard shortcuts, to rendering frames-per-second. See below for an overview of all customization possibilities. You can open the config file within kitty by pressing %ctrl+shift+f2 (⌘+, on macOS). A kitty.conf with commented default configurations and descriptions will be created if the file does not exist. You can reload the config file within kitty by pressing %ctrl+shift+f5 (⌃+⌘+, on macOS) or sending kitty the SIGUSR1 signal. You can also display the current configuration by pressing %ctrl+shift+f6 (⌥+⌘+, on macOS). kitty looks for a config file in the OS config directories (usually ~/.config/kitty/kitty.conf) but you can pass a specific path via the %kitty --config option or use the %KITTY_CONFIG_DIRECTORY environment variable. See %kitty --config for full details. Comments can be added to the config file as lines starting with the # character. This works only if the # character is the first character in the line. You can include secondary config files via the include directive. If you use a relative path for include, it is resolved with respect to the location of the current config file. Note that environment variables are expanded, so ${USER}.conf becomes name.conf if USER=name. Also, you can use globinclude to include files matching a shell glob pattern and envinclude to include configuration from environment variables. For example: 0.0 3.5 C include other.conf # Include *.conf files from all subdirs of kitty.d inside the kitty config dir globinclude kitty.d/**/*.conf # Include the *contents* of all env vars starting with KITTY_CONF_ envinclude KITTY_CONF_* P NOTE: 0.0 3.5 Syntax highlighting for kitty.conf in vim is available via %vim-kitty. kitty has very powerful font management. You can configure individual font faces and even specify special fonts for particular characters. 0.0 font_family, bold_font, italic_font, bold_italic_font 0.0 3.5 C font_family monospace bold_font auto italic_font auto bold_italic_font auto P You can specify different fonts for the bold/italic/bold-italic variants. To get a full list of supported fonts use the kitty +list-fonts command. By default they are derived automatically, by the OSes font system. When %bold_font or %bold_italic_font is set to auto on macOS, the priority of bold fonts is semi-bold, bold, heavy. Setting them manually is useful for font families that have many weight variants like Book, Medium, Thick, etc. For example: 0.0 3.5 C font_family Operator Mono Book bold_font Operator Mono Medium italic_font Operator Mono Book Italic bold_italic_font Operator Mono Medium Italic P 0.0 font_size 0.0 3.5 C font_size 11.0 P Font size (in pts) 0.0 force_ltr 0.0 3.5 C force_ltr no P kitty does not support BIDI (bidirectional text), however, for RTL scripts, words are automatically displayed in RTL. That is to say, in an RTL script, the words (dqHELLO WORLD(dq display in kitty as (dqWORLD HELLO(dq, and if you try to select a substring of an RTL-shaped string, you will get the character that would be there had the the string been LTR. For example, assuming the Hebrew word ירושלים, selecting the character that on the screen appears to be ם actually writes into the selection buffer the character י. kitty(aqs default behavior is useful in conjunction with a filter to reverse the word order, however, if you wish to manipulate RTL glyphs, it can be very challenging to work with, so this option is provided to turn it off. Furthermore, this option can be used with the command line program %GNU FriBidi to get BIDI support, because it will force kitty to always treat the text as LTR, which FriBidi expects for terminals. 0.0 symbol_map 0.0 3.5 C symbol_map U+E0A0-U+E0A3,U+E0C0-U+E0C7 PowerlineSymbols P Map the specified Unicode codepoints to a particular font. Useful if you need special rendering for some symbols, such as for Powerline. Avoids the need for patched fonts. Each Unicode code point is specified in the form U+<code point in hexadecimal>. You can specify multiple code points, separated by commas and ranges separated by hyphens. This option can be specified multiple times. The syntax is: 0.0 3.5 C symbol_map codepoints Font Family Name P 0.0 narrow_symbols 0.0 3.5 C narrow_symbols U+E0A0-U+E0A3,U+E0C0-U+E0C7 1 P Usually, for Private Use Unicode characters and some symbol/dingbat characters, if the character is followed by one or more spaces, kitty will use those extra cells to render the character larger, if the character in the font has a wide aspect ratio. Using this option you can force kitty to restrict the specified code points to render in the specified number of cells (defaulting to one cell). This option can be specified multiple times. The syntax is: 0.0 3.5 C narrow_symbols codepoints [optionally the number of cells] P 0.0 disable_ligatures 0.0 3.5 C disable_ligatures never P Choose how you want to handle multi-character ligatures. The default is to always render them. You can tell kitty to not render them when the cursor is over them by using cursor to make editing easier, or have kitty never render them at all by using always, if you don(aqt like them. The ligature strategy can be set per-window either using the kitty remote control facility or by defining shortcuts for it in kitty.conf, for example: 0.0 3.5 C map alt+1 disable_ligatures_in active always map alt+2 disable_ligatures_in all never map alt+3 disable_ligatures_in tab cursor P Note that this refers to programming ligatures, typically implemented using the calt OpenType feature. For disabling general ligatures, use the %font_features option. 0.0 font_features 0.0 3.5 C font_features none P Choose exactly which OpenType features to enable or disable. This is useful as some fonts might have features worthwhile in a terminal. For example, Fira Code includes a discretionary feature, zero, which in that font changes the appearance of the zero (0), to make it more easily distinguishable from Ø. Fira Code also includes other discretionary features known as Stylistic Sets which have the tags ss01 through ss20. For the exact syntax to use for individual features, see the %HarfBuzz documentation. Note that this code is indexed by PostScript name, and not the font family. This allows you to define very precise feature settings; e.g. you can disable a feature in the italic font but not in the regular font. On Linux, font features are first read from the FontConfig database and then this option is applied, so they can be configured in a single, central place. To get the PostScript name for a font, use kitty +list-fonts --psnames: 0.0 3.5 C $ kitty +list-fonts --psnames | grep Fira Fira Code Fira Code Bold (FiraCode-Bold) Fira Code Light (FiraCode-Light) Fira Code Medium (FiraCode-Medium) Fira Code Regular (FiraCode-Regular) Fira Code Retina (FiraCode-Retina) P The part in brackets is the PostScript name. Enable alternate zero and oldstyle numerals: 0.0 3.5 C font_features FiraCode-Retina +zero +onum P Enable only alternate zero in the bold font: 0.0 3.5 C font_features FiraCode-Bold +zero P Disable the normal ligatures, but keep the calt feature which (in this font) breaks up monotony: 0.0 3.5 C font_features TT2020StyleB-Regular -liga +calt P In conjunction with %force_ltr, you may want to disable Arabic shaping entirely, and only look at their isolated forms if they show up in a document. You can do this with e.g.: 0.0 3.5 C font_features UnifontMedium +isol -medi -fina -init P 0.0 modify_font 0.0 3.5 C modify_font P Modify font characteristics such as the position or thickness of the underline and strikethrough. The modifications can have the suffix px for pixels or % for percentage of original value. No suffix means use pts. For example: 0.0 3.5 C modify_font underline_position -2 modify_font underline_thickness 150% modify_font strikethrough_position 2px P Additionally, you can modify the size of the cell in which each font glyph is rendered and the baseline at which the glyph is placed in the cell. For example: 0.0 3.5 C modify_font cell_width 80% modify_font cell_height -2px modify_font baseline 3 P Note that modifying the baseline will automatically adjust the underline and strikethrough positions by the same amount. Increasing the baseline raises glyphs inside the cell and decreasing it lowers them. Decreasing the cell size might cause rendering artifacts, so use with care. 0.0 box_drawing_scale 0.0 3.5 C box_drawing_scale 0.001, 1, 1.5, 2 P The sizes of the lines used for the box drawing Unicode characters. These values are in pts. They will be scaled by the monitor DPI to arrive at a pixel value. There must be four values corresponding to thin, normal, thick, and very thick lines. 0.0 cursor 0.0 3.5 C cursor #cccccc P Default cursor color. If set to the special value none the cursor will be rendered with a (dqreverse video(dq effect. It(aqs color will be the color of the text in the cell it is over and the text will be rendered with the background color of the cell. Note that if the program running in the terminal sets a cursor color, this takes precedence. Also, the cursor colors are modified if the cell background and foreground colors have very low contrast. 0.0 cursor_text_color 0.0 3.5 C cursor_text_color #111111 P The color of text under the cursor. If you want it rendered with the background color of the cell underneath instead, use the special keyword: background. Note that if %cursor is set to none then this option is ignored. 0.0 cursor_shape 0.0 3.5 C cursor_shape block P The cursor shape can be one of block, beam, underline. Note that when reloading the config this will be changed only if the cursor shape has not been set by the program running in the terminal. This sets the default cursor shape, applications running in the terminal can override it. In particular, %shell integration in kitty sets the cursor shape to beam at shell prompts. You can avoid this by setting %shell_integration to no-cursor. 0.0 cursor_beam_thickness 0.0 3.5 C cursor_beam_thickness 1.5 P The thickness of the beam cursor (in pts). 0.0 cursor_underline_thickness 0.0 3.5 C cursor_underline_thickness 2.0 P The thickness of the underline cursor (in pts). 0.0 cursor_blink_interval 0.0 3.5 C cursor_blink_interval -1 P The interval to blink the cursor (in seconds). Set to zero to disable blinking. Negative values mean use system default. Note that the minimum interval will be limited to %repaint_delay. 0.0 cursor_stop_blinking_after 0.0 3.5 C cursor_stop_blinking_after 15.0 P Stop blinking cursor after the specified number of seconds of keyboard inactivity. Set to zero to never stop blinking. 0.0 scrollback_lines 0.0 3.5 C scrollback_lines 2000 P Number of lines of history to keep in memory for scrolling back. Memory is allocated on demand. Negative numbers are (effectively) infinite scrollback. Note that using very large scrollback is not recommended as it can slow down performance of the terminal and also use large amounts of RAM. Instead, consider using %scrollback_pager_history_size. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_pager 0.0 3.5 C scrollback_pager less --chop-long-lines --RAW-CONTROL-CHARS +INPUT_LINE_NUMBER P Program with which to view scrollback in a new window. The scrollback buffer is passed as STDIN to this program. If you change it, make sure the program you use can handle ANSI escape sequences for colors and text formatting. INPUT_LINE_NUMBER in the command line above will be replaced by an integer representing which line should be at the top of the screen. Similarly CURSOR_LINE and CURSOR_COLUMN will be replaced by the current cursor position or set to 0 if there is no cursor, for example, when showing the last command output. 0.0 scrollback_pager_history_size 0.0 3.5 C scrollback_pager_history_size 0 P Separate scrollback history size (in MB), used only for browsing the scrollback buffer with pager. This separate buffer is not available for interactive scrolling but will be piped to the pager program when viewing scrollback buffer in a separate window. The current implementation stores the data in UTF-8, so approximatively 10000 lines per megabyte at 100 chars per line, for pure ASCII, unformatted text. A value of zero or less disables this feature. The maximum allowed size is 4GB. Note that on config reload if this is changed it will only affect newly created windows, not existing ones. 0.0 scrollback_fill_enlarged_window 0.0 3.5 C scrollback_fill_enlarged_window no P Fill new space with lines from the scrollback buffer after enlarging a window. 0.0 wheel_scroll_multiplier 0.0 3.5 C wheel_scroll_multiplier 5.0 P Multiplier for the number of lines scrolled by the mouse wheel. Note that this is only used for low precision scrolling devices, not for high precision scrolling devices on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. See also %wheel_scroll_min_lines. 0.0 wheel_scroll_min_lines 0.0 3.5 C wheel_scroll_min_lines 1 P The minimum number of lines scrolled by the mouse wheel. The %scroll multiplier only takes effect after it reaches this number. Note that this is only used for low precision scrolling devices like wheel mice that scroll by very small amounts when using the wheel. With a negative number, the minimum number of lines will always be added. 0.0 touch_scroll_multiplier 0.0 3.5 C touch_scroll_multiplier 1.0 P Multiplier for the number of lines scrolled by a touchpad. Note that this is only used for high precision scrolling devices on platforms such as macOS and Wayland. Use negative numbers to change scroll direction. 0.0 mouse_hide_wait 0.0 3.5 C mouse_hide_wait 3.0 P Hide mouse cursor after the specified number of seconds of the mouse not being used. Set to zero to disable mouse cursor hiding. Set to a negative value to hide the mouse cursor immediately when typing text. Disabled by default on macOS as getting it to work robustly with the ever-changing sea of bugs that is Cocoa is too much effort. 0.0 url_color, url_style 0.0 3.5 C url_color #0087bd url_style curly P The color and style for highlighting URLs on mouse-over. %url_style can be one of: none, straight, double, curly, dotted, dashed. 0.0 open_url_with 0.0 3.5 C open_url_with default P The program to open clicked URLs. The special value default with first look for any URL handlers defined via the %Scripting the mouse click facility and if non are found, it will use the Operating System(aqs default URL handler (open on macOS and xdg-open on Linux). 0.0 url_prefixes 0.0 3.5 C url_prefixes file ftp ftps gemini git gopher http https irc ircs kitty mailto news sftp ssh P The set of URL prefixes to look for when detecting a URL under the mouse cursor. 0.0 detect_urls 0.0 3.5 C detect_urls yes P Detect URLs under the mouse. Detected URLs are highlighted with an underline and the mouse cursor becomes a hand over them. Even if this option is disabled, URLs are still clickable. 0.0 url_excluded_characters 0.0 3.5 C url_excluded_characters P Additional characters to be disallowed from URLs, when detecting URLs under the mouse cursor. By default, all characters that are legal in URLs are allowed. 0.0 copy_on_select 0.0 3.5 C copy_on_select no P Copy to clipboard or a private buffer on select. With this set to clipboard, selecting text with the mouse will cause the text to be copied to clipboard. Useful on platforms such as macOS that do not have the concept of primary selection. You can instead specify a name such as a1 to copy to a private kitty buffer. Map a shortcut with the paste_from_buffer action to paste from this private buffer. For example: 0.0 3.5 C copy_on_select a1 map shift+cmd+v paste_from_buffer a1 P Note that copying to the clipboard is a security risk, as all programs, including websites open in your browser can read the contents of the system clipboard. 0.0 paste_actions 0.0 3.5 C paste_actions quote-urls-at-prompt P A comma separated list of actions to take when pasting text into the terminal. The supported paste actions are: 0.0 quote-urls-at-prompt: If the text being pasted is a URL and the cursor is at a shell prompt, automatically quote the URL (needs %shell_integration). confirm: Confirm the paste if bracketed paste mode is not active or there is more a large amount of text being pasted. filter: Run the filter_paste() function from the file paste-actions.py in the kitty config directory on the pasted text. The text returned by the function will be actually pasted. 0.0 strip_trailing_spaces 0.0 3.5 C strip_trailing_spaces never P Remove spaces at the end of lines when copying to clipboard. A value of smart will do it when using normal selections, but not rectangle selections. A value of always will always do it. 0.0 select_by_word_characters 0.0 3.5 C select_by_word_characters @-./_~?&=%+# P Characters considered part of a word when double clicking. In addition to these characters any character that is marked as an alphanumeric character in the Unicode database will be matched. 0.0 select_by_word_characters_forward 0.0 3.5 C select_by_word_characters_forward P Characters considered part of a word when extending the selection forward on double clicking. In addition to these characters any character that is marked as an alphanumeric character in the Unicode database will be matched. If empty (default) %select_by_word_characters will be used for both directions. 0.0 click_interval 0.0 3.5 C click_interval -1.0 P The interval between successive clicks to detect double/triple clicks (in seconds). Negative numbers will use the system default instead, if available, or fallback to 0.5. 0.0 focus_follows_mouse 0.0 3.5 C focus_follows_mouse no P Set the active window to the window under the mouse when moving the mouse around. 0.0 pointer_shape_when_grabbed 0.0 3.5 C pointer_shape_when_grabbed arrow P The shape of the mouse pointer when the program running in the terminal grabs the mouse. Valid values are: arrow, beam and hand. 0.0 default_pointer_shape 0.0 3.5 C default_pointer_shape beam P The default shape of the mouse pointer. Valid values are: arrow, beam and hand. 0.0 pointer_shape_when_dragging 0.0 3.5 C pointer_shape_when_dragging beam P The default shape of the mouse pointer when dragging across text. Valid values are: arrow, beam and hand
kjson_string_write(3): put content data for kcgijson
kxml_pushnull(3), kxml_pushnullattrs(3): write a null element for kcgixml
kxml_write(3): put content data for kcgixml
list-rewrites(1), list-rewrites(1): reads penn treebanks, prints out all rewrites found
lock(3), canlock(3), unlock(3), qlock(3), canqlock(3), qunlock(3), rlock(3), canrlock(3), runlock(3), wlock(3), canwlock(3), wunlock(3), rsleep(3), rwakeup(3), rwakeupall incref(3), decref(3): spin locks, queueing rendezvous locks, reader-writer locks, rendezvous points, and reference counts
memdraw(3), Memimage(3), Memdata(3), Memdrawparam(3), memimageinit(3), wordaddr(3), byteaddr(3), memimagemove(3), allocmemimage(3), allocmemimaged(3), readmemimage(3), creadmemimage(3), writememimage(3), freememimage(3), memsetchan(3), loadmemimage(3), cloadmemimage(3), unloadmemimage(3), memfillcolor(3), memarc(3), mempoly(3), memellipse(3), memfillpoly(3), memimageline(3), memimagedraw(3), drawclip(3), memlinebbox(3), memlineendsize(3), allocmemsubfont(3), openmemsubfont(3), freememsubfont(3), memsubfontwidth(3), getmemdefont(3), memimagestring(3), iprint(3), hwdraw(3): drawing routines for memory-resident images
mio_open(3), mio_close(3), mio_read(3), mio_write(3), mio_nfds(3), mio_pollfd(3), mio_revents(3), mio_eof(3): sndio interface to MIDI streams
mp3lintskip(1): writes .mp3lintskip files from mp3lint output
perlpragma(1): how to write a user pragma
pod::Prima::codecs(3), Prima::codecs(3): How to write a codec for Prima image subsystem
policytool(1): Reads and writes a plain text policy file based on user input through the utility GUI
print(1): write arguments to standard output rst2man-indent-level 0 1 rstReportMargin \$1
printf(1): write formatted output
printf(1): write formatted output rst2man-indent-level 0 1 rstReportMargin \$1
read(1), write(1), copy(1): simple Venti clients
read(3), readn(3), write(3), pread(3), pwrite(3): read or write file
read(9p), write(9p): transfer data from and to a file
readcd(1): read or write data Compact Discs or related media
readstat(1): read and write data set files from SAS, SPSS, and Stata
remoos(1), Header "Name" remoos(1): Rewrite Moos.pm into Your Own Module
rewritepdf.pl(1): Rebuild a PDF file
rmtopen(3), rmtclose(3), rmtread(3), rmtwrite(3), rmtseek(3), rmtioctl(3): operate on a connection to a remote tape server ( -lrmt )
rtedge(1): ray-traces a model, detects edges, and writes a BRL-CAD color image (.pix) file
rthide(1): ray-traces a model and writes a hidden line removed UNIX-Plot file
sio_open(3), sio_close(3), sio_setpar(3), sio_getpar(3), sio_getcap(3), sio_start(3), sio_stop(3), sio_flush(3), sio_read(3), sio_write(3), sio_onmove(3), sio_nfds(3), sio_pollfd(3), sio_revents(3), sio_eof(3), sio_setvol(3), sio_onvol(3), sio_initpar(3), SIO_BPS(3): sndio interface to audio devices
sponge(1): soak up standard input and write to a file
stag-autoschema.pl(1), stag-autoschema(1): writes the implicit stag-schema for a stag file
stag-handle.pl(1), stag-handle(1): streams a stag file through a handler into a writer
subfont(3), allocsubfont(3), freesubfont(3), installsubfont(3), lookupsubfont(3), uninstallsubfont(3), subfontname(3), readsubfont(3), readsubfonti(3), writesubfont(3), stringsubfont(3), strsubfontwidth(3), mkfont(3): subfont manipulation
t.rast.what(1), t.rast.what (1): Sample a space time raster dataset at specific vector point coordinates and write the output to stdout using different layouts
ts_conf_set(3): write a new TSLIB_CONFFILE config file and reload it
tt_spec_write(3): write the spec and any associated properties to the ToolTalk database
udpread(3), udpwrite(3): read and write UDP packets
vCard(3): Read, write, and edit vCards
vCard::AddressBook(3): Read, write, and edit vCard address books
venti-cache(3), VtBlock(3), VtCache(3), vtblockcopy(3), vtblockduplock(3), vtblockput(3), vtblockwrite(3), vtcachealloc(3), vtcacheallocblock(3), vtcachefree(3), vtcacheglobal(3), vtcachelocal(3), vtcachesetwrite(3), vtglobaltolocal(3), vtlocaltoglobal(3): Venti block cache
venti-client(3), vtconnect(3), vthello(3), vtread(3), vtwrite(3), vtreadpacket(3), vtwritepacket(3), vtsync(3), vtping(3), vtrpc(3), ventidoublechecksha1(3): Venti client
venti-file(3), VtFile(3), vtfileblock(3), vtfileblockscore(3), vtfileclose(3), vtfilecreate(3), vtfilecreateroot(3), vtfileflush(3), vtfileflushbefore(3), vtfilegetdirsize(3), vtfilegetentry(3), vtfilegetsize(3), vtfileincref(3), vtfilelock(3), vtfilelock2(3), vtfileopen(3), vtfileopenroot(3), vtfileread(3), vtfileremove(3), vtfilesetdirsize(3), vtfilesetentry(3), vtfilesetsize(3), vtfiletruncate(3), vtfileunlock(3), vtfilewrite(3): Venti files
wcodes(nged): Writes ident, air code, material code, LOS, and name of all the regions in the list of objects to the specifiedfile
wordVectors.pl(1): Write word vectors from WordNet glosses to a file for use by vector and vector_pairs measures
xmlrewrite(1): cleanup XML based on schemas
zip_source_begin_write(3), zip_source_begin_write_cloning(3): prepare zip source for writing
zip_source_commit_write(3): finalize changes to zip source
zip_source_rollback_write(3): undo changes to zip source
zip_source_seek_write(3): set write offset in zip source
zip_source_tell_write(3): report current write offset in zip source
zip_source_write(3): write data to zip source

home | help

Header And Logo

Peripheral Links

Site Navigation

FreeBSD Manual Pages

Header And Logo

Peripheral Links

Search

Site Navigation

FreeBSD Manual Pages