Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
AACRAID(4)		    Kernel Interfaces Manual		    AACRAID(4)

NAME
       aacraid	--  Adaptec  Series  6/7/8 6G and 12G SAS+SATA RAID controller
       driver

SYNOPSIS
       To compile this driver into the kernel, place the  following  lines  in
       your kernel configuration file:

	     device pci
	     device aacraid

	     To	compile	in debugging code:
	     options AACRAID_DEBUG=N

       Alternatively,  to  load	the driver as a	module at boot time, place the
       following line in loader.conf(5):

	     aacraid_load="YES"

DESCRIPTION
       The aacraid driver provides support for the Adaptec by  PMC  RAID  con-
       trollers, including Series 6/7/8	and upcoming families.

       The  RAID  containers  are handled via the aacraidp0 bus.  The physical
       buses  are  represented	by  the	 aacraidp?  devices  (beginning	  with
       aacraidp1).   These  devices enable the SCSI pass-passthrough interface
       and allows devices connected to the card	such as	CD-ROMs	to  be	avail-
       able via	the CAM	scsi(4)	subsystem.  Note that not all cards allow this
       interface to be enabled.

       The  /dev/aacraid? device nodes provide access to the management	inter-
       face of the controller.	One node exists	per installed  card.   If  the
       aacraid_linux.ko	 and linux.ko modules are loaded, the Linux-compatible
       ioctl(2)	interface for the management device will be enabled  and  will
       allow Linux-based management applications to control the	card.

HARDWARE
       The  aacraid  driver supports the following Adaptec 6G and 12G SAS/SATA
       RAID controllers:

          Adaptec ASR-6405(T|E)
          Adaptec ASR-6445
          Adaptec ASR-6805(T|E|Q|TQ)
          Adaptec ASR-7085
          Adaptec ASR-7805(Q)
          Adaptec ASR-70165
          Adaptec ASR-71605(E|Q)
          Adaptec ASR-71685
          Adaptec ASR-72405
          Adaptec Series 8 cards

FILES
       /dev/aacraid?		aacraid	management interface

DIAGNOSTICS
       Compiling with AACRAID_DEBUG set	to a number between 0 and 3  will  en-
       able increasingly verbose debug messages.

       The  adapter  can  send status and alert	messages asynchronously	to the
       driver.	These messages are printed on the system console, and are also
       queued for retrieval by a management application.

SEE ALSO
       kld(4), linux(4), scsi(4), kldload(8)

AUTHORS
       Achim Leubner <achim@FreeBSD.org>
       Ed Maste	<emaste@FreeBSD.org>
       Scott Long <scottl@FreeBSD.org>

BUGS
       The controller is not actually paused on	suspend/resume.

FreeBSD	15.0		      September	29, 2025		    AACRAID(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=aacraid&sektion=4&manpath=FreeBSD+15.0-RELEASE+and+Ports>

home | help