CFUMASS(4) Kernel Interfaces Manual CFUMASS(4) NAME cfumass -- USB device side support for Mass Storage Class Transport SYNOPSIS This driver can be compiled into the kernel by placing these lines in the kernel configuration file: device usb device usb_template device ctl device cfumass The driver module can also be loaded at boot by adding this line to loader.conf(5): cfumass_load="YES" DESCRIPTION The cfumass driver provides device side support for emulating an USB mass storage device compliant with the USB Mass Storage Class Bulk-Only (BBB) Transport specification, implemented as a ctl(4) frontend driver. To use cfumass: * cfumass must be loaded as a module or compiled into the kernel. * The USB Mass Storage template must be chosen by setting the hw.usb.template sysctl to 0. * The USB OTG port must be working in USB device-side mode. This happens automatically upon connection to a USB host. * There must be a ctl(4) LUN configured for the cfumass port. Upon loading, the driver creates a ctl(4) port named cfumass, presenting the first LUN mapped for that port - usually LUN 0 - to the USB host. See ctl.conf(5) and ctld(8) for details on configuring the LUN. See the cfumass_enable and cfumass_dir rc(8) variables in rc.conf(5) for an auto- mated way to configure it at boot. SYSCTL VARIABLES These variables are available as both sysctl(8) variables and loader(8) tunables: hw.usb.cfumass.debug Verbosity level for log messages from the cfumass driver. Set to 0 to disable logging or 1 to warn about potential problems. Larger values enable debugging output. Defaults to 1. hw.usb.cfumass.ignore_stop Ignore START STOP UNIT SCSI commands with START and LOEJ bits cleared. Some initiators send that command to stop the target when the user attempts to gracefully eject the drive, but fail to start it when the drive is reconnected. Set to 0 to handle the command in a standards-compliant way, 1 to ignore it and log a warning, or 2 to ignore it silently. Defaults to 1. hw.usb.cfumass.max_lun Max LUN number to report to the initiator (USB host). Must be be- tween 0 and 15. Some initiators incorrectly handle values larger than 0. Defaults to 0. SEE ALSO ctl(4), umass(4), usb(4), usb_template(4), ctl.conf(5), ctld(8) HISTORY The cfumass driver first appeared in FreeBSD 11.1. AUTHORS The cfumass driver was developed by Edward Tomasz Napierala <trasz@FreeBSD.org> under sponsorship from the FreeBSD Foundation. FreeBSD 15.1 April 21, 2018 CFUMASS(4)
NAME | SYNOPSIS | DESCRIPTION | SYSCTL VARIABLES | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=cfumass&sektion=4&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>