FreeBSD Manual Pages
DTSEC(4) powerpc Kernel Interfaces Manual DTSEC(4) NAME dtsec -- Freescale Datapath Acceleration Architecture-based Three-Speed Ethernet Controller device driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: include "dpaa/config.dpaa" device dpaa device miibus DESCRIPTION The dtsec driver provides support for the DPAA-based gigabit Ethernet con- troller integrated in some of the Freescale system-on-chip devices. The dtsec driver supports the following media types: autoselect Enable autoselection of the media type and options 10baseT/UTP Set 10Mbps operation 100baseTX Set 100Mbps operation 1000baseT Set 1000baseT operation The dtsec driver supports the following media options: full-duplex Set full duplex operation The dtsec driver supports two operating modes: Regular Normal mode, utilizing the full datapath accelera- tion, Buffer Manager, and Queue Manager. Independent Runs disconnected from the Buffer Manager and Queue Manager. HARDWARE Gigabit Ethernet controllers built into the following Freescale system-on- chip devices are known to work with the dtsec driver: * P2041, P3041 * P5010, P5020 Additionally, the following devices are expected to work, but are untested: * P4080, P4040 * P5040 SEE ALSO altq(4), arp(4), miibus(4), netintro(4), ng_ether(4), ifconfig(8) HISTORY The dtsec device driver first appeared in FreeBSD 11.0. AUTHORS The base version of dtsec device driver was written by Semihalf. This man- ual page was written by Justin Hibbits. FreeBSD ports 15.quarterly October 31, 2017 DTSEC(4)
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=dtsec&sektion=4&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>