FreeBSD Manual Pages
MLX5IB(4) Kernel Interfaces Manual MLX5IB(4) NAME mlx5ib -- Mellanox ConnectX-4 and ConnectX-4 LX based 100Gb, 50Gb, 40Gb, 25Gb and 10Gb network adapter driver SYNOPSIS To compile this driver into the kernel, place these lines in your ker- nel configuration file: options COMPAT_LINUXKPI device mlx5 device mlx5ib To load the driver as a module at run-time, run this command as root: kldload mlx5ib To load the driver as a module at boot time, place this line in loader.conf(5): mlx5ib_load="YES" DESCRIPTION The mlx5ib driver provides support for infiniband and Remote DMA over Converged Ethernet, RoCE, for PCI Express network adapters based on ConnectX-4 and ConnectX-4 LX. For further hardware information and questions related to hardware re- quirements, see http://www.mellanox.com/. For more information on configuring this device, see ifconfig(8). HARDWARE The mlx5ib driver supports 100Gb, 50Gb, 40Gb, 25Gb and 10Gb network adapters. ConnectX-4 supports: 10/20/25/40/50/56/100Gb/s speeds. Con- nectX-4 LX supports: 10/25/40/50Gb/s speeds (and reduced power consump- tion): • Mellanox MCX455A-ECAT • Mellanox MCX456A-ECAT • Mellanox MCX415A-CCAT • Mellanox MCX416A-CCAT • Mellanox MCX455A-FCAT • Mellanox MCX456A-FCAT • Mellanox MCX415A-BCAT • Mellanox MCX416A-BCAT • Mellanox MCX4131A-GCAT • Mellanox MCX4131A-BCAT • Mellanox MCX4121A-ACAT • Mellanox MCX4111A-ACAT • Mellanox MCX4121A-XCAT • Mellanox MCX4111A-XCAT SUPPORT For general information and support, go to the Mellanox support website at: http://www.mellanox.com/. If an issue is identified with this driver with a supported adapter, email all the specific information related to the issue to <freebsd-drivers@mellanox.com>. SEE ALSO mlx5en(4), ifconfig(8) HISTORY The mlx5ib device driver first appeared in FreeBSD 12.0. AUTHORS The mlx5ib driver was written by Mellanox Technologies <freebsd-drivers@mellanox.com>. FreeBSD 15.0 August 23, 2017 MLX5IB(4)
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SUPPORT | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mlx5ib&sektion=4&manpath=FreeBSD+15.0-RELEASE+and+Ports.quarterly>