FreeBSD Manual Pages
MPSUTIL(8) System Manager's Manual MPSUTIL(8) NAME mpsutil, mprutil -- Utility for managing LSI Fusion-MPT 2/3 controllers SYNOPSIS mpsutil version mpsutil [-u unit] show adapter mpsutil [-u unit] show adapters mpsutil [-u unit] show all mpsutil [-u unit] show cfgpage page [num] [addr] mpsutil [-u unit] show devices mpsutil [-u unit] show enclosures mpsutil [-u unit] show expanders mpsutil [-u unit] show iocfacts mpsutil [-u unit] set ncq [enable|disable] mpsutil [-u unit] flash save [firmware|bios] [file] mpsutil [-u unit] flash update [firmware|bios] file DESCRIPTION The mpsutil utility can be used to display or modify various parameters on LSI Fusion-MPS 2 controllers. The mprutil utility can be used to display or modify various parameters on LSI Fusion-MPS 3 controllers. Both the mprutil and mpsutil commands behave identically. Each invocation of mpsutil consists of zero or more global options followed by a command. Commands may support additional optional or required argu- ments after the command. Currently one global option is supported: -u unit unit specifies the unit of the controller to work with. If no unit is specified, then unit 0 is used. The mpsutil utility supports several different groups of commands. The first group of commands provide information about the controller. The sec- ond group of commands are used to manager controller-wide operations. The informational commands include: version Displays the version of mpsutil. show adapter Displays information about the controller such as the model number or firmware version. show adapters Displays a summary of all adapters. show all Displays all devices, expanders and enclosures. show devices Displays all devices. show expanders Displays all expanders. show enclosures Displays all enclosures. show iocfacts Displays IOC Facts messages. show cfgpage page [num] [addr] Dump raw config page in hex. Controller management commands include: set ncq [enable|disable] Enables or disables NCQ in the NVRAM of the card. flash save [firmware|bios] [file] Save the firmware or bios from the controller into a local file. If no file is specified then the file will be named firmware or bios. flash update [firmware|bios] file Replace the firmware or bios from the controller with the one spec- ified via file. SEE ALSO mpr(4), mps(4) HISTORY The mpsutil utility first appeared in FreeBSD 11.0. TODO Flash operations (save/update) are not supported on big-endian architec- tures. FreeBSD ports 15.quarterly May 7, 2021 MPSUTIL(8)
NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | HISTORY | TODO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=mpsutil&sektion=8&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>