Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
MY(4)			    Kernel Interfaces Manual			 MY(4)

NAME
       my -- Myson Technology Ethernet PCI driver

SYNOPSIS
       To  compile  this  driver  into the kernel, place the following line in
       your kernel configuration file:

	     device my

       Alternatively, to load the driver as a module at	boot time,  place  the
       following line in loader.conf(5):

	     if_my_load="YES"

DESCRIPTION
       The  my	driver	provides  support  for various NICs based on the Myson
       chipset.	 The Myson chipset is a	variant	of the DEC Tulip NIC chipset.

       The driver will work with almost	any MII-compliant PHY, thus failure to
       positively identify the chip is not a fatal error.

HARDWARE
       The my driver provides support for various  NICs	 based	on  the	 Myson
       chipset.	 Supported models include:

          Myson MTD800	PCI Fast Ethernet chip
          Myson MTD803	PCI Fast Ethernet chip
          Myson MTD89X	PCI Gigabit Ethernet chip

SEE ALSO
       altq(4),	netintro(4), pci(4), ifconfig(8)

HISTORY
       The my driver first appeared in FreeBSD 4.6.

AUTHORS
       The my driver was written by Myson Technology Inc.

       This manual page	was written by Hiten M.	Pandya <hmp@FreeBSD.org>.

BUGS
       The my driver does not support Power Management Events (PME).

FreeBSD	14.3		       December	26, 2020			 MY(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=my&sektion=4&manpath=FreeBSD+14.3-RELEASE+and+Ports>

home | help