SND_ATIIXP(4) Kernel Interfaces Manual SND_ATIIXP(4) NAME snd_atiixp -- ATI IXP bridge device driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device sound device snd_atiixp Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): snd_atiixp_load="YES" DESCRIPTION The snd_atiixp bridge driver allows the generic audio driver, sound(4), to attach to ATI IXP audio devices. This driver supports 16bit playback and recording, and 32bit native playback and recording. Runtime Configuration The following sysctl(8) variables are available in addition to those avail- able to all sound(4) devices: dev.pcm.%d.polling Experimental polling mode, where the driver oper- ates by querying the device state on each tick using callout(9). Polling is disabled by de- fault. Do not enable it unless you are facing weird interrupt problems or if the device cannot generate interrupts at all. HARDWARE The snd_atiixp driver supports the following audio chipsets: * ATI IXP 200 * ATI IXP 300 * ATI IXP 400 SEE ALSO sound(4) HISTORY The snd_atiixp device driver first appeared in FreeBSD 6.1. AUTHORS This manual page was written by Joel Dahl <joel@FreeBSD.org>. BUGS The snd_atiixp driver does not support S/PDIF, but implementing it should be fairly easy if the right hardware is available. 32bit native recording is broken on some hardware. FreeBSD 15.1 November 29, 2006 SND_ATIIXP(4)
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SEE ALSO | HISTORY | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=snd_atiixp&sektion=4&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>