Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help 
UVSCOM(4)		     Kernel Interfaces Manual		       UVSCOM(4)

NAME
     uvscom -- USB support for SUNTAC Slipper U VS-10U serial adapters driver

SYNOPSIS
     To compile this driver into the kernel, place the following lines in your
     kernel configuration file:

	   device usb
	   device ucom
	   device uvscom

     Alternatively, to load the driver as a module at boot time, place the
     following line in loader.conf(5):

	   uvscom_load="YES"

HARDWARE
     The uvscom driver supports the following adapters:

     *	 DDI Pocket Air H" C@rd
     *	 DDI Pocket Air H" C@rd 64
     *	 NTT P-in
     *	 NTT P-in m@ster

DESCRIPTION
     The  uvscom  driver  provides support for the SUNTAC Slipper U VS-10U chip.
     Slipper U is a PC	Card  to  USB  converter  for  data  communication  card
     adapters.

     The  device  is  accessed	through the ucom(4) driver which makes it behave
     like a tty(4).

FILES
     /dev/ttyU*       for callin ports
     /dev/ttyU*.init
     /dev/ttyU*.lock  corresponding callin initial-state and lock-state devices

     /dev/cuaU*       for callout ports
     /dev/cuaU*.init
     /dev/cuaU*.lock  corresponding callout initial-state and lock-state devices

SEE ALSO
     tty(4), ucom(4), usb(4)

HISTORY
     The uvscom driver first appeared in FreeBSD and later in NetBSD 1.6.   This
     manual  page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in
     April 2002.

FreeBSD ports 15.quarterly	 April 26, 2017 		       UVSCOM(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=uvscom&sektion=4&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>

home | help