SEND(2) Linux Programmer's Manual SEND(2) NAME send, sendto, sendmsg - send a message on a socket SYNOPSIS #include <sys/types.h> #include <sys/socket.h> ssize_t send(int sockfd, const void *buf, size_t len, int flags); ssize_t sendto(int sockfd, const void *buf, size_t len, int flags, const struct sockaddr *dest_addr, socklen_t addrlen); ssize_t sendmsg(int sockfd, const struct msghdr *msg, int flags); DESCRIPTION The system calls send(), sendto(), and sendmsg() are used to transmit a message to another socket. The send() call may be used only when the socket is in a connected state (so that the intended recipient is known). The only difference between send() and write(2) is the presence of flags. With a zero flags argument, send() is equivalent to write(2). Also, the following call send(sockfd, buf, len, flags); is equivalent to sendto(sockfd, buf, len, flags, NULL, 0); The argument sockfd is the file descriptor of the sending socket. If sendto() is used on a connection-mode (SOCK_STREAM, SOCK_SEQPACKET) socket, the arguments dest_addr and addrlen are ignored (and the error EIS- CONN may be returned when they are not NULL and 0), and the error ENOTCONN is returned when the socket was not actually connected. Otherwise, the ad- dress of the target is given by dest_addr with addrlen specifying its size. For sendmsg(), the address of the target is given by msg.msg_name, with msg.msg_namelen specifying its size. For send() and sendto(), the message is found in buf and has length len. For sendmsg(), the message is pointed to by the elements of the array msg.msg_iov. The sendmsg() call also allows sending ancillary data (also known as control information). If the message is too long to pass atomically through the underlying proto- col, the error EMSGSIZE is returned, and the message is not transmitted. No indication of failure to deliver is implicit in a send(). Locally de- tected errors are indicated by a return value of -1. When the message does not fit into the send buffer of the socket, send() normally blocks, unless the socket has been placed in nonblocking I/O mode. In nonblocking mode it would fail with the error EAGAIN or EWOULDBLOCK in this case. The select(2) call may be used to determine when it is possible to send more data. The flags argument is the bitwise OR of zero or more of the following flags. MSG_CONFIRM (Since Linux 2.3.15) Tell the link layer that forward progress happened: you got a suc- cessful reply from the other side. If the link layer doesn't get this it will regularly reprobe the neighbor (e.g., via a unicast ARP). Only valid on SOCK_DGRAM and SOCK_RAW sockets and currently implemented only for IPv4 and IPv6. See arp(7) for details. MSG_DONTROUTE Don't use a gateway to send out the packet, send to hosts only on directly connected networks. This is usually used only by diagnos- tic or routing programs. This is defined only for protocol families that route; packet sockets don't. MSG_DONTWAIT (since Linux 2.2) Enables nonblocking operation; if the operation would block, EAGAIN or EWOULDBLOCK is returned (this can also be enabled using the O_NONBLOCK flag with the F_SETFL fcntl(2)). MSG_EOR (since Linux 2.2) Terminates a record (when this notion is supported, as for sockets of type SOCK_SEQPACKET). MSG_MORE (Since Linux 2.4.4) The caller has more data to send. This flag is used with TCP sock- ets to obtain the same effect as the TCP_CORK socket option (see tcp(7)), with the difference that this flag can be set on a per-call basis. Since Linux 2.6, this flag is also supported for UDP sockets, and informs the kernel to package all of the data sent in calls with this flag set into a single datagram which is transmitted only when a call is performed that does not specify this flag. (See also the UDP_CORK socket option described in udp(7).) MSG_NOSIGNAL (since Linux 2.2) Requests not to send SIGPIPE on errors on stream oriented sockets when the other end breaks the connection. The EPIPE error is still returned. MSG_OOB Sends out-of-band data on sockets that support this notion (e.g., of type SOCK_STREAM); the underlying protocol must also support out-of- band data. The definition of the msghdr structure follows. See recv(2) and below for an exact description of its fields. struct msghdr { void *msg_name; /* optional address */ socklen_t msg_namelen; /* size of address */ struct iovec *msg_iov; /* scatter/gather array */ size_t msg_iovlen; /* # elements in msg_iov */ void *msg_control; /* ancillary data, see below */ size_t msg_controllen; /* ancillary data buffer len */ int msg_flags; /* flags on received message */ }; You may send control information using the msg_control and msg_controllen members. The maximum control buffer length the kernel can process is lim- ited per socket by the value in /proc/sys/net/core/optmem_max; see socket(7). RETURN VALUE On success, these calls return the number of characters sent. On error, -1 is returned, and errno is set appropriately. ERRORS These are some standard errors generated by the socket layer. Additional errors may be generated and returned from the underlying protocol modules; see their respective manual pages. EACCES (For UNIX domain sockets, which are identified by pathname) Write permission is denied on the destination socket file, or search per- mission is denied for one of the directories the path prefix. (See path_resolution(7).) (For UDP sockets) An attempt was made to send to a network/broadcast address as though it was a unicast address. EAGAIN or EWOULDBLOCK The socket is marked nonblocking and the requested operation would block. POSIX.1-2001 allows either error to be returned for this case, and does not require these constants to have the same value, so a portable application should check for both possibilities. EBADF An invalid descriptor was specified. ECONNRESET Connection reset by peer. EDESTADDRREQ The socket is not connection-mode, and no peer address is set. EFAULT An invalid user space address was specified for an argument. EINTR A signal occurred before any data was transmitted; see signal(7). EINVAL Invalid argument passed. EISCONN The connection-mode socket was connected already but a recipient was specified. (Now either this error is returned, or the recipient specification is ignored.) EMSGSIZE The socket type requires that message be sent atomically, and the size of the message to be sent made this impossible. ENOBUFS The output queue for a network interface was full. This generally indicates that the interface has stopped sending, but may be caused by transient congestion. (Normally, this does not occur in Linux. Packets are just silently dropped when a device queue overflows.) ENOMEM No memory available. ENOTCONN The socket is not connected, and no target has been given. ENOTSOCK The argument sockfd is not a socket. EOPNOTSUPP Some bit in the flags argument is inappropriate for the socket type. EPIPE The local end has been shut down on a connection oriented socket. In this case the process will also receive a SIGPIPE unless MSG_NOSIGNAL is set. CONFORMING TO 4.4BSD, SVr4, POSIX.1-2001. These function calls appeared in 4.2BSD. POSIX.1-2001 describes only the MSG_OOB and MSG_EOR flags. POSIX.1-2008 adds a specification of MSG_NOSIGNAL. The MSG_CONFIRM flag is a Linux ex- tension. NOTES The prototypes given above follow the Single UNIX Specification, as glibc2 also does; the flags argument was int in 4.x BSD, but unsigned int in libc4 and libc5; the len argument was int in 4.x BSD and libc4, but size_t in libc5; the addrlen argument was int in 4.x BSD and libc4 and libc5. See also accept(2). According to POSIX.1-2001, the msg_controllen field of the msghdr structure should be typed as socklen_t, but glibc currently types it as size_t. See sendmmsg(2) for information about a Linux-specific system call that can be used to transmit multiple datagrams in a single call. BUGS Linux may return EPIPE instead of ENOTCONN. EXAMPLE An example of the use of sendto() is shown in getaddrinfo(3). SEE ALSO fcntl(2), getsockopt(2), recv(2), select(2), sendfile(2), sendmmsg(2), shutdown(2), socket(2), write(2), cmsg(3), ip(7), socket(7), tcp(7), udp(7) COLOPHON This page is part of release 3.53 of the Linux man-pages project. A de- scription of the project, and information about reporting bugs, can be found at http://www.kernel.org/doc/man-pages/. Linux 2012-04-23 SEND(2)
NAME | SYNOPSIS | DESCRIPTION | RETURN VALUE | ERRORS | CONFORMING TO | NOTES | BUGS | EXAMPLE | SEE ALSO | COLOPHON
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=sendto&sektion=2&manpath=CentOS+7.9>