FreeBSD Manual Pages
KQUEUE(2) System Calls Manual KQUEUE(2) NAME kqueue, kevent -- kernel event notification mechanism LIBRARY Standard C Library (libc, -lc) SYNOPSIS #include <sys/types.h> #include <sys/event.h> #include <sys/time.h> int kqueue(void); int kevent(int kq, const struct kevent *changelist, int nchanges, struct kevent *eventlist, int nevents, const struct timespec *timeout); EV_SET(kev, ident, filter, flags, fflags, data, udata); DESCRIPTION The kqueue() system call provides a generic method of notifying the user when an event happens or a condition holds, based on the results of small pieces of kernel code termed filters. A kevent is identified by the (ident, filter) pair; there may only be one unique kevent per kqueue. The filter is executed upon the initial registration of a kevent in or- der to detect whether a preexisting condition is present, and is also executed whenever an event is passed to the filter for evaluation. If the filter determines that the condition should be reported, then the kevent is placed on the kqueue for the user to retrieve. The filter is also run when the user attempts to retrieve the kevent from the kqueue. If the filter indicates that the condition that trig- gered the event no longer holds, the kevent is removed from the kqueue and is not returned. Multiple events which trigger the filter do not result in multiple kevents being placed on the kqueue; instead, the filter will aggregate the events into a single struct kevent. Calling close() on a file de- scriptor will remove any kevents that reference the descriptor. The kqueue() system call creates a new kernel event queue and returns a descriptor. The queue is not inherited by a child created with fork(2). However, if rfork(2) is called without the RFFDG flag, then the descriptor table is shared, which will allow sharing of the kqueue between two processes. The kevent() system call is used to register events with the queue, and return any pending events to the user. The changelist argument is a pointer to an array of kevent structures, as defined in <sys/event.h>. All changes contained in the changelist are applied before any pending events are read from the queue. The nchanges argument gives the size of changelist. The eventlist argument is a pointer to an array of kevent structures. The nevents argument determines the size of eventlist. When nevents is zero, kevent() will return immediately even if there is a timeout specified unlike select(2). If timeout is a non- NULL pointer, it specifies a maximum interval to wait for an event, which will be interpreted as a struct timespec. If timeout is a NULL pointer, kevent() waits indefinitely. To effect a poll, the timeout argument should be non-NULL, pointing to a zero-valued timespec struc- ture. The same array may be used for the changelist and eventlist. The EV_SET() macro is provided for ease of initializing a kevent struc- ture. The kevent structure is defined as: struct kevent { uintptr_t ident; /* identifier for this event */ short filter; /* filter for event */ u_short flags; /* action flags for kqueue */ u_int fflags; /* filter flag value */ intptr_t data; /* filter data value */ void *udata; /* opaque user data identifier */ }; The fields of struct kevent are: ident Value used to identify this event. The exact interpretation is determined by the attached filter, but often is a file descriptor. filter Identifies the kernel filter used to process this event. The pre-defined system filters are described below. flags Actions to perform on the event. fflags Filter-specific flags. data Filter-specific data value. udata Opaque user-defined value passed through the kernel un- changed. The flags field can contain the following values: EV_ADD Adds the event to the kqueue. Re-adding an existing event will modify the parameters of the original event, and not result in a duplicate entry. Adding an event automati- cally enables it, unless overridden by the EV_DISABLE flag. EV_ENABLE Permit kevent() to return the event if it is triggered. EV_DISABLE Disable the event so kevent() will not return it. The filter itself is not disabled. EV_DISPATCH Disable the event source immediately after delivery of an event. See EV_DISABLE above. EV_DELETE Removes the event from the kqueue. Events which are at- tached to file descriptors are automatically deleted on the last close of the descriptor. EV_RECEIPT This flag is useful for making bulk changes to a kqueue without draining any pending events. When passed as in- put, it forces EV_ERROR to always be returned. When a filter is successfully added the data field will be zero. EV_ONESHOT Causes the event to return only the first occurrence of the filter being triggered. After the user retrieves the event from the kqueue, it is deleted. EV_CLEAR After the event is retrieved by the user, its state is re- set. This is useful for filters which report state tran- sitions instead of the current state. Note that some fil- ters may automatically set this flag internally. EV_EOF Filters may set this flag to indicate filter-specific EOF condition. EV_ERROR See "RETURN VALUES" below. The predefined system filters are listed below. Arguments may be passed to and from the filter via the fflags and data fields in the kevent structure. EVFILT_READ Takes a descriptor as the identifier, and returns whenever there is data available to read. The be- havior of the filter is slightly different depend- ing on the descriptor type. Sockets Sockets which have previously been passed to listen() return when there is an incoming con- nection pending. data contains the size of the listen backlog. Other socket descriptors return when there is data to be read, subject to the SO_RCVLOWAT value of the socket buffer. This may be over- ridden with a per-filter low water mark at the time the filter is added by setting the NOTE_LOWAT flag in fflags, and specifying the new low water mark in data. On return, data contains the number of bytes of protocol data available to read. If the read direction of the socket has shut- down, then the filter also sets EV_EOF in flags, and returns the socket error (if any) in fflags. It is possible for EOF to be returned (indicating the connection is gone) while there is still data pending in the socket buffer. Vnodes Returns when the file pointer is not at the end of file. data contains the offset from current position to end of file, and may be negative. This behavior is different from poll(2), where read events are triggered for regular files un- conditionally. This event can be triggered un- conditionally by setting the NOTE_FILE_POLL flag in fflags. Fifos, Pipes Returns when the there is data to read; data contains the number of bytes available. When the last writer disconnects, the filter will set EV_EOF in flags. This may be cleared by passing in EV_CLEAR, at which point the fil- ter will resume waiting for data to become available before returning. BPF devices Returns when the BPF buffer is full, the BPF timeout has expired, or when the BPF has "immediate mode" enabled and there is any data to read; data contains the number of bytes available. EVFILT_WRITE Takes a descriptor as the identifier, and returns whenever it is possible to write to the descriptor. For sockets, pipes and fifos, data will contain the amount of space remaining in the write buffer. The filter will set EV_EOF when the reader disconnects, and for the fifo case, this may be cleared by use of EV_CLEAR. Note that this filter is not sup- ported for vnodes or BPF devices. For sockets, the low water mark and socket error handling is identical to the EVFILT_READ case. EVFILT_AIO The sigevent portion of the AIO request is filled in, with sigev_notify_kqueue containing the de- scriptor of the kqueue that the event should be at- tached to, sigev_notify_kevent_flags containing the kevent flags which should be EV_ONESHOT, EV_CLEAR or EV_DISPATCH, sigev_value containing the udata value, and sigev_notify set to SIGEV_KEVENT. When the aio_*() system call is made, the event will be registered with the specified kqueue, and the ident argument set to the struct aiocb returned by the aio_*() system call. The filter returns under the same conditions as aio_error(). EVFILT_VNODE Takes a file descriptor as the identifier and the events to watch for in fflags, and returns when one or more of the requested events occurs on the de- scriptor. The events to monitor are: NOTE_ATTRIB The file referenced by the de- scriptor had its attributes changed. NOTE_CLOSE A file descriptor referencing the monitored file, was closed. The closed file de- scriptor did not have write access. NOTE_CLOSE_WRITE A file descriptor referencing the monitored file, was closed. The closed file de- scriptor has write access. This note, as well as NOTE_CLOSE, are not activated when files are closed forcibly by unmount(2) or revoke(2). Instead, NOTE_REVOKE is sent for such events. NOTE_DELETE The unlink() system call was called on the file referenced by the descriptor. NOTE_EXTEND For regular file, the file referenced by the descriptor was extended. For directory, reports that a directory entry was added or removed, as the result of re- name operation. The NOTE_EXTEND event is not re- ported when a name is changed inside the directory. NOTE_LINK The link count on the file changed. In particular, the NOTE_LINK event is reported if a subdirectory was created or deleted inside the directory referenced by the descriptor. NOTE_OPEN The file referenced by the de- scriptor was opened. NOTE_READ A read occurred on the file referenced by the descriptor. NOTE_RENAME The file referenced by the de- scriptor was renamed. NOTE_REVOKE Access to the file was revoked via revoke(2) or the underly- ing file system was unmounted. NOTE_WRITE A write occurred on the file referenced by the descriptor. On return, fflags contains the events which trig- gered the filter. EVFILT_PROC Takes the process ID to monitor as the identifier and the events to watch for in fflags, and returns when the process performs one or more of the re- quested events. If a process can normally see an- other process, it can attach an event to it. The events to monitor are: NOTE_EXIT The process has exited. The exit status will be stored in data. NOTE_FORK The process has called fork(). NOTE_EXEC The process has executed a new process via execve(2) or a simi- lar call. NOTE_TRACK Follow a process across fork() calls. The parent process regis- ters a new kevent to monitor the child process using the same fflags as the original event. The child process will signal an event with NOTE_CHILD set in fflags and the parent PID in data. If the parent process fails to register a new kevent (usually due to resource limitations), it will signal an event with NOTE_TRACKERR set in fflags, and the child process will not signal a NOTE_CHILD event. On return, fflags contains the events which trig- gered the filter. EVFILT_PROCDESC Takes the process descriptor created by pdfork(2) to monitor as the identifier and the events to watch for in fflags, and returns when the associ- ated process performs one or more of the requested events. The events to monitor are: NOTE_EXIT The process has exited. The exit status will be stored in data. On return, fflags contains the events which trig- gered the filter. EVFILT_SIGNAL Takes the signal number to monitor as the identi- fier and returns when the given signal is delivered to the process. This coexists with the signal() and sigaction() facilities, and has a lower prece- dence. The filter will record all attempts to de- liver a signal to a process, even if the signal has been marked as SIG_IGN, except for the SIGCHLD sig- nal, which, if ignored, won't be recorded by the filter. Event notification happens after normal signal delivery processing. data returns the num- ber of times the signal has occurred since the last call to kevent(). This filter automatically sets the EV_CLEAR flag internally. EVFILT_TIMER Establishes an arbitrary timer identified by ident. When adding a timer, data specifies the timeout pe- riod. The timer will be periodic unless EV_ONESHOT is specified. On return, data contains the number of times the timeout has expired since the last call to kevent(). This filter automatically sets the EV_CLEAR flag internally. There is a system wide limit on the number of timers which is con- trolled by the kern.kq_calloutmax sysctl. NOTE_SECONDS data is in seconds. NOTE_MSECONDS data is in milliseconds. NOTE_USECONDS data is in microseconds. NOTE_NSECONDS data is in nanoseconds. If fflags is not set, the default is milliseconds. On return, fflags contains the events which trig- gered the filter. EVFILT_USER Establishes a user event identified by ident which is not associated with any kernel mechanism but is triggered by user level code. The lower 24 bits of the fflags may be used for user defined flags and manipulated using the following: NOTE_FFNOP Ignore the input fflags. NOTE_FFAND Bitwise AND fflags. NOTE_FFOR Bitwise OR fflags. NOTE_FFCOPY Copy fflags. NOTE_FFCTRLMASK Control mask for fflags. NOTE_FFLAGSMASK User defined flag mask for fflags. A user event is triggered for output with the fol- lowing: NOTE_TRIGGER Cause the event to be trig- gered. On return, fflags contains the users defined flags in the lower 24 bits. CANCELLATION BEHAVIOUR If nevents is non-zero, i.e. the function is potentially blocking, the call is a cancellation point. Otherwise, i.e. if nevents is zero, the call is not cancellable. Cancellation can only occur before any changes are made to the kqueue, or when the call was blocked and no changes to the queue were requested. RETURN VALUES The kqueue() system call creates a new kernel event queue and returns a file descriptor. If there was an error creating the kernel event queue, a value of -1 is returned and errno set. The kevent() system call returns the number of events placed in the eventlist, up to the value given by nevents. If an error occurs while processing an element of the changelist and there is enough room in the eventlist, then the event will be placed in the eventlist with EV_ERROR set in flags and the system error in data. Otherwise, -1 will be re- turned, and errno will be set to indicate the error condition. If the time limit expires, then kevent() returns 0. EXAMPLES #include <sys/types.h> #include <sys/event.h> #include <sys/time.h> #include <err.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <string.h> #include <unistd.h> int main(int argc, char **argv) { struct kevent event; /* Event we want to monitor */ struct kevent tevent; /* Event triggered */ int kq, fd, ret; if (argc != 2) err(EXIT_FAILURE, "Usage: %s path\n", argv[0]); fd = open(argv[1], O_RDONLY); if (fd == -1) err(EXIT_FAILURE, "Failed to open '%s'", argv[1]); /* Create kqueue. */ kq = kqueue(); if (kq == -1) err(EXIT_FAILURE, "kqueue() failed"); /* Initialize kevent structure. */ EV_SET(&event, fd, EVFILT_VNODE, EV_ADD | EV_CLEAR, NOTE_WRITE, 0, NULL); /* Attach event to the kqueue. */ ret = kevent(kq, &event, 1, NULL, 0, NULL); if (ret == -1) err(EXIT_FAILURE, "kevent register"); if (event.flags & EV_ERROR) errx(EXIT_FAILURE, "Event error: %s", strerror(event.data)); for (;;) { /* Sleep until something happens. */ ret = kevent(kq, NULL, 0, &tevent, 1, NULL); if (ret == -1) { err(EXIT_FAILURE, "kevent wait"); } else if (ret > 0) { printf("Something was written in '%s'\n", argv[1]); } } } ERRORS The kqueue() system call fails if: [ENOMEM] The kernel failed to allocate enough memory for the kernel queue. [ENOMEM] The RLIMIT_KQUEUES rlimit (see getrlimit(2)) for the current user would be exceeded. [EMFILE] The per-process descriptor table is full. [ENFILE] The system file table is full. The kevent() system call fails if: [EACCES] The process does not have permission to register a filter. [EFAULT] There was an error reading or writing the kevent structure. [EBADF] The specified descriptor is invalid. [EINTR] A signal was delivered before the timeout expired and before any events were placed on the kqueue for return. [EINTR] A cancellation request was delivered to the thread, but not yet handled. [EINVAL] The specified time limit or filter is invalid. [ENOENT] The event could not be found to be modified or deleted. [ENOMEM] No memory was available to register the event or, in the special case of a timer, the maximum number of timers has been exceeded. This maximum is config- urable via the kern.kq_calloutmax sysctl. [ESRCH] The specified process to attach to does not exist. When kevent() call fails with EINTR error, all changes in the changelist have been applied. SEE ALSO aio_error(2), aio_read(2), aio_return(2), poll(2), read(2), select(2), sigaction(2), write(2), pthread_setcancelstate(3), signal(3) HISTORY The kqueue() and kevent() system calls first appeared in FreeBSD 4.1. AUTHORS The kqueue() system and this manual page were written by Jonathan Lemon <jlemon@FreeBSD.org>. BUGS The timeout value is limited to 24 hours; longer timeouts will be silently reinterpreted as 24 hours. FreeBSD 11.0 May 3, 2016 KQUEUE(2)
NAME | LIBRARY | SYNOPSIS | DESCRIPTION | CANCELLATION BEHAVIOUR | RETURN VALUES | EXAMPLES | ERRORS | SEE ALSO | HISTORY | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=kqueue&manpath=FreeBSD+11.0-RELEASE+and+Ports>