CXGBETOOL(8) System Manager's Manual CXGBETOOL(8) NAME cxgbetool -- Userspace companion to cxgbe(4) SYNOPSIS cxgbetool nexus command [parameter ...] cxgbetool nexus clearstats port_id cxgbetool nexus context {ingress | egress | fl | cong} cntxt_id cxgbetool nexus filter mode [match-criteria ...] cxgbetool nexus filter idx {filter-specification | delete} cxgbetool nexus filter list cxgbetool nexus i2c port_id devaddr addr [len] cxgbetool nexus loadcfg fw-config.txt cxgbetool nexus loadcfg clear cxgbetool nexus loadfw fw-image.bin cxgbetool nexus memdump addr len cxgbetool nexus {reg | reg64} addr[=val] cxgbetool nexus regdump [register-block ...] cxgbetool nexus sched-class sub-command [param value] cxgbetool nexus sched-queue port queue class cxgbetool nexus stdio cxgbetool nexus tcb tid DESCRIPTION cxgbetool provides command-line access to features and debug facilities ex- ported by cxgbe(4) via private ioctls. The target nexus device, t4nex%d , is always the first argument. (The parent nexus for an Ethernet port cxgbe%d is listed in dev.cxgbe.%d.%parent in the sysctl(8) MIB). The rest consists of a command and any parameters required by that command. Commands clearstats port_id Clear all transmit, receive, and error statistics of all queues associated with a port. The total number of ports attached to a nexus is listed in dev.t4nex.%d.nports and the 0 based port_id identifies a port within this range. context ingress ingress_cntxt_id context cong ingress_cntxt_id context egress egress_cntxt_id context fl flm_cntxt_id Display hardware context for an ingress queue, congestion manager, egress queue, or freelist manager. ingress_cntxt_id context id of an ingress queue -- the value listed in one of dev.t4nex.%d.fwq.cntxt_id, dev.cxgbe.%d.rxq.%d.cntxt_id, or dev.cxgbe.%d.ofld_rxq.%d.cntxt_id. egress_cntxt_id context id of an egress queue -- the value listed in one of dev.t4nex.%d.mgmtq.cntxt_id, dev.cxgbe.%d.txq.%d.cntxt_id, dev.cxgbe.%d.ctrlq.%d.cntxt_id, dev.cxgbe.%d.ofld_txq.%d.cntxt_id, dev.cxgbe.%d.rxq.%d.fl.cntxt_id, or dev.cxgbe.%d.ofld_rxq.%d.fl.cntxt_id. Note that freel- ists are egress queues too. flm_cntxt_id context id of a freelist manager. The FLM context id is displayed in the egress context dump of a freelist as FLMcontextID. filter mode [match-criteria ...] Display or set the nexus's filter mode. match-criteria is a whitespace separated list of criteria from the table below. Each criteria has an as- sociated budget which is also listed in the table. The total budget al- lowed is 36 and attempts to set a filter mode that exceeds this will be re- jected. Every filter must conform to the filter mode -- multiple match criteria per filter are allowed but only from among those in the current setting of the filter mode. The filter mode can only be changed when there are no existing filters. Its default value is ipv4 ipv6 sip dip sport dport matchtype proto vlan iport fcoe (Note that mask defaults to all 1s when not provided explicitly. Also note that many of the items being matched are discrete numeric values rather than bit fields and should be masked with caution.) Criteria Budget Usage Matches if ... --------------------------------------------------------------------------- ipv4 0 type ipv4 incoming packet is an IPv4 datagram. --------------------------------------------------------------------------- ipv6 0 type ipv6 incoming packet is an IPv6 datagram. --------------------------------------------------------------------------- sip 0 sip addr[/mask] bitwise and of the source address in an incoming IP datagram with mask equals addr. addr can be an IPv4 or IPv6 ad- dress. --------------------------------------------------------------------------- dip 0 dip addr[/mask] bitwise and of the destination address in an incoming IP datagram with mask equals addr. addr can be an IPv4 or IPv6 address. --------------------------------------------------------------------------- sport 0 sport bitwise and of the source port in an in- port[:mask] coming TCP or UDP datagram with mask equals port. --------------------------------------------------------------------------- dport 0 dport bitwise and of the destination port in port[:mask] an incoming TCP or UDP datagram with mask equals port. --------------------------------------------------------------------------- fcoe 1 fcoe {0 | 1} incoming frame is Fibre Channel over Ethernet(1) or not(0). --------------------------------------------------------------------------- iport 3 iport val[:mask] bitwise and of the ingress port with mask equals val. The ingress port is a 3 bit number that identifies the port on which a frame arrived. Physical ports are numbered 0-3 and 4-7 are internal loopback paths within the chip. Note that ingress port is not a bit field so it is not always possible to match an arbitrary subset of ingress ports with a single filter rule. --------------------------------------------------------------------------- ovlan 17 ovlan tag[:mask] bitwise and of the 16-bit outer VLAN tag of an incoming frame with mask equals tag. --------------------------------------------------------------------------- vlan 17 vlan tag[:mask] bitwise and of the 16-bit VLAN tag of an incoming QinQ frame with mask equals tag. The inner VLAN tag is used if the incoming frame is QinQ. --------------------------------------------------------------------------- tos 8 tos val[:mask] bitwise and of the 8-bit IP Type of Ser- vice/IPv6 Traffic Class in an incoming packet with mask equals val. --------------------------------------------------------------------------- proto 8 proto bitwise and of the 8-bit IP protocol in ipproto[:mask] an incoming packet with mask equals ipproto. --------------------------------------------------------------------------- ethtype 16 ethtype bitwise and of the 16-bit Ethernet type type[:mask] field of an incoming frame with mask equals type. --------------------------------------------------------------------------- macidx 9 macidx bitwise and of the MAC Address Match In- idx[:mask] dex of an incoming frame with mask equals idx. The MAC Address Match Index refers to an entry in the MPS TCAM or in the MPS hash. See matchtype for more information. --------------------------------------------------------------------------- matchtype 3 matchtype bitwise and of the Match Type of an in- type[:mask] coming frame with mask equals idx. Match Type is one of the following: 0 destination MAC in incoming frame is a unicast L2 address that is pro- grammed in the MPS TCAM. macidx can be used to match the index (and thus the MAC address) of the match in the TCAM. 1 destination MAC in incoming frame is a unicast L2 address that "hit" a hash entry in the MPS hash table. macidx can be used to match the index of the entry in the MPS hash table. 2 destination MAC in incoming frame is a multicast L2 address that is pro- grammed in the MPS TCAM. macidx can be used to match the index (and thus the MAC address) of the match in the TCAM. 3 destination MAC in incoming frame is a multicast L2 address that "hit" an entry in the MPS hash table. 4 interface on which incoming frame was received is in promiscuous mode and the destination MAC in the frame is not a broadcast address, and does not match in the MPS TCAM or the MPS hash either. (The frame would have been discarded if the interface wasn't in promiscuous mode.) 5 interface on which incoming frame was received is in promiscuous mode and the destination MAC in the frame is not a broadcast address; it wasn't looked up in the MPS TCAM or the MPS hash because the chip is configured to give precedence to promiscuous mode classification. 6 destination MAC in incoming frame is a broadcast address. 7 Not documented. Do not use. --------------------------------------------------------------------------- frag 1 frag {0 | 1} incoming frame is part of a fragmented IP datagram(1) or not(0). filter idx filter-specification Program a filter at the index specified by idx. filter-specification con- sists of one or more matches to try against an incoming frame and an action to perform when all matches succeed. filter idx delete Delete filter that is at the given index. filter list List all filters programmed into the hardware. i2c port_id devaddr addr [len] loadcfg fw-config.txt Install the firmware configuration file contained in fw-config.txt to the card. Set hw.cxgbe.config_file="flash" in loader.conf to get cxgbe(4) to use the on-flash configuration. loadcfg clear Erase configuration file from the card. loadfw fw-image.bin Install the firmware contained in fw-image.bin to the card. memdump addr len Display len bytes of data of the card's memory starting at addr. The card's memory map is available in dev.t4nex.%d.misc.meminfo. {reg | reg64} addr[=val] regdump [register-block ...] Display contents of device registers. One or more register-block can be specified to limit the registers displayed. The default is to display reg- isters for all blocks. Registers with read side effects are not read dur- ing a regdump operation. register-block can be sge pci dbg mc ma edc0 edc1 cim tp ulp_rx ulp_tx pmrx pmtx mps cplsw smb i2c mi uart pmu sf pl le ncsi xgmac. sched-class config [param value] Configure optional feature capabilities for the TX scheduler. type scheduler-type Use packet for the packet scheduler. minmax value A non-zero value will enable "minmax" mode; a zero value will disable "minmax" mode. NOTE: Many (most) of the parameters and constraints are adapter-spe- cific - for instance the number of channels and classes which are available whether various modes are implemented, etc. Consult the adapter documentation for specific information on any limitations. sched-class params [param value] Configure parameters for a scheduling class. type scheduler-type Use packet for packet scheduler. level scheduler-hierarchy-level The "level" within the scheduling hierarchy which is being programed: cl-rl Class Rate Limiting. cl-wrr Class Weighted Round Robin. cl-wrr Channel Rate Limiting. mode scheduler-mode The mode in which the scheduling class is going to operate: class All of the "flows" bound to the scheduling class will be held to aggregate scheduling constraints. flow Each of the "flows" bound to the scheduling class will be held to the scheduling constraints. E.g. if the scheduling class has a TX bandwidth of 10Mb/s, in class mode, all of the "flows" bound to the class would be limited to an aggregate bandwidth of 10Mb/s; but in flow mode, each of the "flows" bound to the scheduling class would be limited to 10Mb/s. rate-unit scheduler-rate-unit The units of the scheduler rate constraints: bits bit rate in Kb/s. pkts packets/s. rate-mode scheduler-rate-mode The mode of the scheduler rate constraints: relative percent of port rate. absolute Kb/s. channel scheduler-channel-index The scheduling channel to which the scheduling class will be bound. class scheduler-class-index The scheduling class being programmed. min-rate minimum-rate The minimum guaranteed rate to which a rate-limiting scheduling class hierarchy will have access. max-rate maximum-rate The maximum rate for a rate-limiting scheduling class hierarchy. weight round-robin-weight The weight to be used for a weighted-round-robin scheduling hierar- chy. pkt-size average-packet-size The average packet size will be used to compute scheduler constraints for a rate-limited scheduler class hierarchy. NOTE: Many (most) of the parameters and constraints are adapter-spe- cific - for instance the number of channels and classes which are available, whether various modes are implemented, etc. Consult the adapter documentation for specific information on any limitations. sched-queue port queue class Bind the indicated port's NIC TX queue to the specified TX Scheduler class. If the TX queue is all, * or any negative value, the binding will apply to all of the TX queues associated with the interface. If the class is unbind, clear or any negative value, the TX queue(s) will be unbound from any current TX Scheduler Class binding. stdio Switch to interactive mode. tcb tid Display contents of the hardware TCB (TCP Control Block) for the connection identfied by tid. FILES /sys/dev/cxgbe/t4_ioctl.h AUTHORS This manual page was written by Navdeep Parhar <np@FreeBSD.org>. FreeBSD 11.1 March 6, 2017 CXGBETOOL(8)
NAME | SYNOPSIS | DESCRIPTION | FILES | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=cxgbetool&sektion=8&manpath=FreeBSD+11.1-RELEASE>