home | help
IWM(4)			     Kernel Interfaces Manual			  IWM(4)

NAME
     iwm -- Intel IEEE 802.11ac wireless network driver

SYNOPSIS
     To compile this driver into the kernel, include the following lines in your
     kernel configuration file:

	   device iwm
	   device pci
	   device wlan
	   device firmware

     You also need to select a firmware for your device.  Choose one from:

	   device iwm3160fw
	   device iwm7260fw
	   device iwm7265fw
	   device iwm8000Cfw

     Or you can use

	   device iwmfw

     to include them all.

     Alternatively, to load the driver as a module at boot time, place the
     following lines in loader.conf(5):

	   if_iwm_load="YES"
	   iwm3160fw_load="YES"
	   iwm7260fw_load="YES"
	   iwm7265fw_load="YES"
	   iwm8000Cfw_load="YES"

DESCRIPTION
     The iwm driver provides support for:

	   Intel Dual Band Wireless AC 3160
	   Intel Dual Band Wireless AC 3165
	   Intel Dual Band Wireless AC 7260
	   Intel Dual Band Wireless AC 7265
	   Intel Dual Band Wireless AC 8260

     iwm  supports  station  mode  operation.  Only one virtual interface may be
     configured at any time.  For more information on configuring  this  device,
     see ifconfig(8).

     This driver requires the firmware built with the iwmfw module to work.

EXAMPLES
     Join an existing BSS network (i.e., connect to an access point):

	   ifconfig wlan create wlandev iwm0 inet 192.168.0.20 \
	       netmask 0xffffff00

     Join a specific BSS network with network name "my_net":

	   ifconfig wlan create wlandev iwm0 ssid my_net up

     Join a specific BSS network with 64-bit WEP encryption:

	   ifconfig wlan create wlandev iwm0 ssid my_net \
		   wepmode on wepkey 0x1234567890 weptxkey 1 up

     Join a specific BSS network with 128-bit WEP encryption:

	   ifconfig wlan create wlandev iwm0 wlanmode adhoc ssid my_net \
	       wepmode on wepkey 0x01020304050607080910111213 weptxkey 1

DIAGNOSTICS
     iwm%d: device timeout  The driver will reset the hardware.  This should not
     happen.

     iwm%d: firmware error  The onboard microcontroller crashed for some reason.
     The driver will reset the hardware.  This should not happen.

     iwm%d: timeout waiting for firmware initialization to complete  The onboard
     microcontroller failed to initialize in time.  This should not happen.

     iwm%d:  could  not  load firmware image '%s'  The driver failed to load the
     firmware image  using  the  firmware(9)  subsystem.   Verify  the	iwmfw(4)
     firmware module is present.

     iwm%d: could not load boot firmware  An attempt to upload the boot firmware
     image to the onboard microcontroller failed.  This should not happen.

     iwm%d:  could  not load microcode	An attempt to upload the microcode image
     to the onboard microcontroller failed.  This should not happen.

     iwm%d: could not load main firmware  An attempt to upload the main firmware
     image to the onboard microcontroller failed.  This should not happen.

SEE ALSO
     iwmfw(4), pci(4), wlan(4), wlan_ccmp(4), wlan_tkip(4), wlan_wep(4),  ifcon-
     fig(8), wpa_supplicant(8)

FreeBSD 11.1			  July 26, 2016 			  IWM(4)

home | help