home | help
nvidia-xconfig(1)	     General Commands Manual	       nvidia-xconfig(1)

NAME
     nvidia-xconfig - manipulate X configuration files for the NVIDIA driver

SYNOPSIS
     nvidia-xconfig [ options ]

DESCRIPTION
     nvidia-xconfig  is a tool intended to provide basic control over configura-
     tion options available in the NVIDIA X driver.

     nvidia-xconfig performs its operations in several steps:

     1)     The system X configuration file is found and read into  memory.   If
	    no	configuration  file  can  be found, nvidia-xconfig generates one
	    from scratch using default settings; in  this  case,  nvidia-xconfig
	    will write the configuration to /etc/X11/xorg.conf

     2)     The  configuration	in memory is modified to support the NVIDIA dri-
	    ver.  This consists of changing the display driver to "nvidia",  re-
	    moving  the  commands  to  load  the "GLcore" and "dri" modules, and
	    adding the command to load the "glx" module.

     3)     The configuration in memory is modified  according	to  the  options
	    specified  on  the command line.  Please see the NVIDIA README for a
	    description of the NVIDIA X configuration file options.   Note  that
	    nvidia-xconfig  does  not perform any validation of the X configura-
	    tion file options requested on the	command  line;	X  configuration
	    file option validation is left for the NVIDIA X driver.

     4)     The  configuration	is  written  back  to the file from which it was
	    read.  A backup  of  the  original	configuration  is  created  with
	    ".backup"  appended.   For	example,  if  your  X  configuration  is
	    /etc/X11/xorg.conf	 then	nvidia-xconfig	 will	copy	it    to
	    /etc/X11/xorg.conf.backup before writing the new configuration.  The
	    --post-tree  (-T)  option can be used to print the new configuration
	    to standard out in tree form instead.  This option is useful to  see
	    what nvidia-xconfig will do while leaving the original configuration
	    intact.

     The  source  code to nvidia-xconfig is released under the GPL and available
     here:

	  <https://download.nvidia.com/XFree86/nvidia-xconfig/>

     Patches are welcome.

OPTIONS
     -c XCONFIG, --xconfig=XCONFIG
	    Use XCONFIG as the input X config file; if this option is not speci-
	    fied, then the same search path used by the X server will be used to
	    find the X configuration file.

     -o OUTPUT-XCONFIG, --output-xconfig=OUTPUT-XCONFIG
	    Use OUTPUT-XCONFIG as the output X configuration file; if  this  op-
	    tion  is not specified, then the input X configuration filename will
	    also be used as the output X configuration filename.

     -s, --silent
	    Run silently; no messages will be  printed	to  stdout,  except  for
	    warning and error messages to stderr.

     -t, --tree
	    Read  the  X configuration file, print to stdout the X configuration
	    data in a tree format, and exit.

     -v, --version
	    Print the nvidia-xconfig version and exit.

     -h, --help
	    Print usage information for the common commandline options and exit.

     -A, --advanced-help
	    Print usage information for the common commandline options	as  well
	    as the advanced options, and then exit.

ADVANCED OPTIONS
     --acpid-socket-path=ACPID-SOCKET-PATH, --no-acpid-socket-path
	    Set  this option to specify an alternate path to the Linux ACPI dae-
	    mon (acpid)'s socket, which the NVIDIA X driver will use to  connect
	    to acpid.

     --add-argb-glx-visuals, --no-add-argb-glx-visuals
	    Enables  or  disables  support for OpenGL rendering into 32-bit ARGB
	    windows and pixmaps.

     --allow-glx-with-composite, --no-allow-glx-with-composite
	    Enable or disable the "AllowGLXWithComposite"  X  configuration  op-
	    tion.

     --busid=BUSID, --no-busid
	    This  option writes the specified BusID to the device section of the
	    X configuration file.  If there are multiple device  sections,  then
	    it adds the BusID field to each of them.  To add the BusID to only a
	    specific  device or screen section, use the '--device' or '--screen'
	    options.

     --preserve-busid, --no-preserve-busid
	    By default, nvidia-xconfig preserves the existing  BusID  in  the  X
	    configuration  file  only if there are multiple X screens configured
	    for the X server.  Use '--preserve-busid'  or  '--no-preserve-busid'
	    to	force the BusID to be preserved or not preserved, overriding the
	    default behavior.

     --cool-bits=COOL-BITS, --no-cool-bits
	    Enable or disable the "Coolbits" X	configuration  option.	 Setting
	    this  option  will	enable support in the NV-CONTROL X extension for
	    manipulating GPU clock and GPU fan control settings.  Default  value
	    is	0.  For fan control set it to 4.  WARNING: this may cause system
	    damage and void warranties.

     --composite, --no-composite
	    Enable or disable the "Composite" X extension.

     --connected-monitor=CONNECTED-MONITOR, --no-connected-monitor
	    Enable or disable the  "ConnectedMonitor"  X  configuration  option;
	    setting  this  option forces the X driver to behave as if the speci-
	    fied display devices are connected to the GPU.

     --connect-to-acpid, --no-connect-to-acpid
	    Enable or disable the "ConnectToAcpid" X configuration  option.   If
	    this  option  is set, the NVIDIA X driver will attempt to connect to
	    the Linux ACPI daemon (acpid).  Set this option to	off  to  prevent
	    the X driver from attempting to connect to acpid.

     --constant-dpi, --no-constant-dpi
	    Enable  or	disable  the "ConstantDPI" X configuration option, which
	    controls whether the NVIDIA X driver maintains a constant  dots  per
	    inch  (DPI) value by recomputing the reported size in millimeters of
	    the X screen when XRandR changes the size in pixels of the X screen.

     --custom-edid=CUSTOM-EDID, --no-custom-edid
	    Enable or disable the  "CustomEDID" X configuration option;  setting
	    this  option  forces the X driver to use the EDID specified.This op-
	    tion is a semicolon-separated list of pairs of display device  names
	    and  filename pairs; e.g "CRT-0:mp\did.bin". Note that a display de-
	    vice name must always be specified even if only one EDID  is  speci-
	    fied.

     --dac-8bit, --no-dac-8bit
	    Most  Quadro parts by default use a 10 bit color look up table (LUT)
	    by default; setting this option to TRUE forces these graphics  chips
	    to use an 8 bit (LUT).

     -d DEPTH, --depth=DEPTH
	    Set  the  default depth to DEPTH ; valid values for DEPTH are 8, 15,
	    16, 24, and 30.

     --device=DEVICE
	    The nvidia-xconfig utility operates on one or more devices in the  X
	    configuration  file.   If this option is specified, the device named
	    DEVICE in the X configuration file will be used.  If this option  is
	    not  specified, all the devices within the X configuration file will
	    be used.

     --disable-glx-root-clipping, --no-disable-glx-root-clipping
	    Disable or enable clipping OpenGL rendering to the root  window  via
	    the "DisableGLXRootClipping" X configuration option.

     --damage-events, --no-damage-events
	    Use  OS-level  events to notify the X server when a direct-rendering
	    client has performed rendering that needs to be  composited  to  the
	    screen.   Improves performance when using GLX with the composite ex-
	    tension.

     --preserve-driver-name
	    By default nvidia-xconfig changes the  display  driver  to	"nvidia"
	    for  all  configured  X  screens; this option preserves the existing
	    driver name of each X screen.

     -a, --enable-all-gpus
	    Delete all existing X screens in  the  current  configuration,  then
	    configure an X screen on every GPU in your system.

     --exact-mode-timings-dvi, --no-exact-mode-timings-dvi
	    Forces  the  initialization  of  the X server with the exact timings
	    specified in the ModeLine.

     -E FILE, --extract-edids-from-file=FILE
	    Extract any raw EDID byte blocks contained in the  specified  X  log
	    file  LOG ; raw EDID bytes are printed by the NVIDIA X driver to the
	    X log as hexidecimal  when	verbose  logging  is  enabled  with  the
	    "-logverbose  6"  X  server commandline option.  Any extracted EDIDs
	    are then written as binary data to individual  files.   These  files
	    can  later be used by the NVIDIA X driver through the "CustomEDID" X
	    configuration option.

     --extract-edids-output-file=FILENAME
	    When the '--extract-edids-from-file' option is used,  nvidia-xconfig
	    writes  any  extracted  EDID  to a file, typically "edid.bin" in the
	    current directory.	Use this option to specify  an	alternate  file-
	    name.   Note that nvidia-xconfig, if necessary, will append a unique
	    number to the EDID filename, to  avoid  overwriting  existing  files
	    (e.g., "edid.bin.1" if "edid.bin" already exists).

     --flatpanel-properties=FLATPANEL-PROPERTIES, --no-flatpanel-properties
	    Set the flat panel properties. The supported properties are 'dither-
	    ing' and 'ditheringmode'.  Please see the NVIDIA README 'Appendix B.
	    X  Config  Options' for more details on the possible values and syn-
	    tax.

     --flip, --no-flip
	    Enable or disable OpenGL flipping

     --force-generate
	    Force generation of a new X config file, ignoring any existing  sys-
	    tem  X  config  file.   This is not typically recommended, as things
	    like the mouse protocol, keyboard layout, font paths, etc, are setup
	    by your Unix distribution.	While nvidia-xconfig can attempt to  in-
	    fer  these values, it is best to use your Unix distribution's X con-
	    fig file for the basis of anything that nvidia-xconfig creates.

     --force-stereo-flipping, --no-force-stereo-flipping
	    Normally, stereo flipping is only performed when a	stereo	drawable
	    is	visible.  This option forces stereo flipping even when no stereo
	    drawables are visible.

     --handle-special-keys=WHEN, --no-handle-special-keys
	    Specify when the X server should use the builtin keyboard handler to
	    process special key combinations (such as  Ctrl+Alt+Backspace);  see
	    the  X configuration man page for details.	The value of WHEN can be
	    'Always', 'Never', or 'WhenNeeded'.

     --include-implicit-metamodes, --no-include-implicit-metamodes
	    Enable or disable the "IncludeImplicitMetaModes" X configuration op-
	    tion.

     --keyboard=KEYBOARD
	    When generating a new X configuration file (which  happens	when  no
	    system  X configuration file can be found, or the '--force-generate'
	    option is specified), use KEYBOARD as the keyboard type, rather than
	    attempting to probe the system for the keyboard type.  For a list of
	    possible keyboard types, see the '--keyboard-list' option.

     --keyboard-driver=DRIVER
	    In most cases nvidia-xconfig can automatically determine the correct
	    keyboard driver to use (either 'kbd' or 'keyboard'). Use this option
	    to override what nvidia-xconfig detects. Typically, if you are using
	    an X.Org X server, use 'kdb'; if you are using an XFree86 X  server,
	    use 'keyboard'.

     --keyboard-list
	    Print  to  stdout  the  available  keyboard  types recognized by the
	    '--keyboard' option, and then exit.

     --layout=LAYOUT
	    The nvidia-xconfig utility operates on a Server Layout within the  X
	    configuration  file.   If this option is specified, the layout named
	    LAYOUT in the X configuration file will be used.  If this option  is
	    not  specified,  the first Server Layout in the X configuration file
	    is used.

     --mode=MODE
	    Add the specified mode to the mode list.

     --mode-debug, --no-mode-debug
	    Enable or disable the "ModeDebug" X configuration option;  when  en-
	    abled,  this  option  causes  the  X driver to print verbose details
	    about mode validation to the X log file.

     --mode-list=MODELIST
	    Remove all existing modes from the X  configuration's  modelist  and
	    add the one(s) specified in the MODELIST string.

     --remove-mode=MODE
	    Remove the specified mode from the mode list.

     --metamodes=METAMODES
	    Add  the  MetaMode	X  configuration option with the value METAMODES
	    which will replace any existing MetaMode option  already  in  the  X
	    configuration file.

     --mouse=MOUSE
	    When  generating  a  new X configuration file (which happens when no
	    system X configuration file can be found, or the  '--force-generate'
	    option  is	specified), use MOUSE as the mouse type, rather than at-
	    tempting to probe the system for the mouse type.  For a list of pos-
	    sible mouse types, see the '--mouse-list' option.

     --mouse-list
	    Print  to  stdout  the  available  mouse  types  recognized  by  the
	    '--mouse' option, and then exit.

     --multigpu=MULTIGPU, --no-multigpu
	    Enable  or	disable  MultiGPU.  Valid values for MULTIGPU are 'Off',
	    'On', 'Auto', 'AFR', 'SFR', 'AA'.

     --multisample-compatibility, --no-multisample-compatibility
	    Enable or disable the use of separate  front  and  back  multisample
	    buffers.

     --nvidia-cfg-path=PATH
	    The nvidia-cfg library is used to communicate with the NVIDIA kernel
	    module  to	query basic properties of every GPU in the system.  This
	    library is typically only used by  nvidia-xconfig  when  configuring
	    multiple  X screens.  This option tells nvidia-xconfig where to look
	    for this library (in case it cannot find it on its own).   This  op-
	    tion should normally not be needed.

     --only-one-x-screen
	    Disable all but one X screen.

     --overlay, --no-overlay
	    Enable or disable the "Overlay" X configuration option.

     --cioverlay, --no-cioverlay
	    Enable or disable the color index overlay.

     --overlay-default-visual, --no-overlay-default-visual
	    Enable or disable the "OverlayDefaultVisual" X configuration option.

     --transparent-index=INDEX, --no-transparent-index
	    Pixel  to use as transparent when using color index overlays.  Valid
	    values for TRANSPARENT-INDEX are 0-255.

     -T, --post-tree
	    Like the '--tree' option, but goes through the full process  of  ap-
	    plying  any  user  requested  updates to the X configuration, before
	    printing the final configuration to stdout in a tree format.  Effec-
	    tively, this option just causes the configuration to be  printed  to
	    stdout as a tree instead of writing the results to file.

     --power-connector-check, --no-power-connector-check
	    Disable  or  enable  the "NoPowerConnectorCheck" X configuration op-
	    tion.

     --probe-all-gpus, --no-probe-all-gpus
	    Disable or enable the "ProbeAllGpus" X configuration option.

     --query-gpu-info
	    Print information about all recognized NVIDIA GPUs in the system.

     --registry-dwords=REGISTRY-DWORDS, --no-registry-dwords
	    Enable or disable the "RegistryDwords" X configuration option.

     --render-accel, --no-render-accel
	    Enable or disable the "RenderAccel" X configuration option.

     --render-extension, --no-render-extension
	    Disable or enable the "NoRenderExtension" X configuration option.

     --screen=SCREEN
	    The nvidia-xconfig utility operates on one or more screens within  a
	    Server Layout in the X configuration file.	If this option is speci-
	    fied,  the	screen	named SCREEN in the X configuration file will be
	    used.  If this option is not specified, all screens within	the  se-
	    lected Server Layout in the X configuration file will be used used.

     --separate-x-screens, --no-separate-x-screens
	    A GPU that supports multiple simultaneous display devices can either
	    drive  these  display devices in a single X screen, or as separate X
	    screens.  When the '--separate-x-screens' option is specified,  each
	    GPU  on which an X screen is currently configured will be updated to
	    have two or more (depending on  the  capabilities  of  that  GPU)  X
	    screens  configured.   The '--no-separate-x-screens' option will re-
	    move any extra configured X screens on each  GPU.	Please	see  the
	    NVIDIA  README  description  of  "Separate X Screens on One GPU" for
	    further details.

     --x-screens-per-gpu=X-SCREENS-PER-GPU
	    A GPU that supports multiple simultaneous display devices can either
	    drive these display devices in a single X screen, or as  separate  X
	    screens.  When the '--x-screens-per-gpu=<quantity>' option is speci-
	    fied,  each GPU on which an X screen is currently configured will be
	    updated to have <quantity> X screens. <quantity> has to  be  greater
	    than  0.  Setting  <quantity>  to  1 is equivalent to specifying the
	    '--no-separate-x-screens' option.  Please see the NVIDIA README  de-
	    scription of "Separate X Screens on One GPU" for further details.

     --sli=SLI, --no-sli
	    Enable  or	disable  SLI.	Valid  values  for  SLI are 'Off', 'On',
	    'Auto', 'AFR', 'SFR', 'AA', 'AFRofAA', 'Mosaic'.

     --stereo=STEREO, --no-stereo
	    Enable or disable the stereo mode.	Valid values for STEREO  are:  0
	    (Disabled),  1  (DDC  glasses),  2	(Blueline  glasses),  3 (Onboard
	    stereo), 4 (multi-display clone mode  stereo),  5  (SeeReal  digital
	    flat panel), 6 (Sharp3D digital flat panel), 7 (Arisawa/Hyundai/Zal-
	    man/Pavione/Miracube), 8 (3D DLP), 9 (3D DLP INV), 10 (NVIDIA 3D VI-
	    SION), 11 (NVIDIA 3D VISION PRO), 12 (HDMI 3D), 13 (Tridelity SL).

     --thermal-configuration-check, --no-thermal-configuration-check
	    Disable  or  enable  the "ThermalConfigurationCheck" X configuration
	    option.

     --tv-standard=TV-STANDARD, --no-tv-standard
	    Enable or disable the "TVStandard"	X  configuration  option.  Valid
	    values  for  "TVStandard"  are:  "PAL-B", "PAL-D", "PAL-G", "PAL-H",
	    "PAL-I", "PAL-K1", "PAL-M", "PAL-N", "PAL-NC",  "NTSC-J",  "NTSC-M",
	    "HD480i",	"HD480p",   "HD720p",  "HD1080i",  "HD1080p",  "HD576i",
	    "HD576p".

     --tv-out-format=TV-OUT-FORMAT, --no-tv-out-format
	    Enable or disable the "TVOutFormat" X  configuration  option.  Valid
	    values for "TVOutFormat" are: "SVIDEO" and "COMPOSITE".

     --metamode-orientation=ORIENTATION, --no-metamode-orientation
	    Specify  the MetaModeOrientation.  Valid values for ORIENTATION are:
	    "RightOf" (the default), "LeftOf", "Above", "Below", or "Clone".

     --nvidia-xinerama-info, --no-nvidia-xinerama-info
	    Enable or disable providing Xinerama information from the  NVIDIA  X
	    driver.

     --nvidia-xinerama-info-order=NVIDIA-XINERAMA-INFO-ORDER, --no-nvidia-xin-
     erama-info-order
	    Enable  or disable the "nvidiaXineramaInfoOrder" X configuration op-
	    tion.  NVIDIA-XINERAMA-INFO-ORDER is a comma-separated list of  dis-
	    play  device  names  that  describe the order in which nvidiaXinera-
	    maInfo should be reported.	E.g., "CRT, DFP, TV".

     --ubb, --no-ubb
	    Enable or disable the "UBB" X configuration option.

     --use-edid, --no-use-edid
	    Enable or disable use of the EDID (Extended  Display  Identification
	    Data) from your display device(s).	The EDID will be used for driver
	    operations	such  as  building lists of available modes, determining
	    valid frequency ranges, and computing the DPI (Dots Per Inch).  This
	    option defaults to TRUE (the NVIDIA X driver will use the EDID, when
	    available).  It is NOT recommended that you use this option to glob-
	    ally disable use of the EDID; instead, use '--no-use-edid-freqs'  or
	    '--no-use-edid-dpi' to disable specific uses of the EDID.

     --use-edid-dpi, --no-use-edid-dpi
	    Enable  or	disable use of the physical size information in the dis-
	    play device's EDID, if any, to compute the DPI (Dots  Per  Inch)  of
	    the  X  screen.   This  option defaults to TRUE (the NVIDIA X driver
	    uses the EDID's physical size, when available, to compute the DPI).

     --use-edid-freqs, --no-use-edid-freqs
	    Enable or disable use of the HorizSync and VertRefresh ranges  given
	    in a display device's EDID, if any.  EDID provided range information
	    will  override the HorizSync and VertRefresh ranges specified in the
	    Monitor section.  This option defaults to TRUE (the NVIDIA X  driver
	    will use frequency information from the EDID, when available).

     --use-display-device=DISPLAY-DEVICE, --no-use-display-device
	    Force the X driver to use the display device specified.

     --use-events, --no-use-events
	    Enable  or	disable "UseEvents" X configuration option. Setting this
	    option will enable the X driver to use the	system	events	in  some
	    cases when it is waiting for the hardware. With this option X driver
	    sets  an event handler and waits for the hardware through the poll()
	    system call. This option defaults to FALSE.

     --virtual=WIDTHxHEIGHT, --no-virtual
	    Specify the virtual screen resolution.

     --x-prefix=X-PREFIX
	    The X installation prefix; the default is /usr/X11R6/.   Only  under
	    rare circumstances should this option be needed.

     --xinerama, --no-xinerama
	    Enable or disable Xinerama.

     --color-space=COLORSPACE, --no-color-space
	    Enable  or	disable  the  "ColorSpace" X configuration option. Valid
	    values for "COLORSPACE" are: "RGB" and "YCbCr444".

     --color-range=COLORRANGE, --no-color-range
	    Sets the "ColorRange" X configuration option. Valid values for "COL-
	    ORRANGE" are: "Full" and "Limited".

     --3dvision-usb-path=3DVISION-USB-PATH
	    Set this option to specify the sysfs path of the connected USB  don-
	    gle.

     --3dvisionpro-config-file=3DVISIONPRO-CONFIG-FILE
	    Set  this  option  to  specify  the NVIDIA 3DVisionPro configuration
	    file. Ensure X server has a read and  write  access  permissions  to
	    this file. NVIDIA X driver stores the hub and the pairing configura-
	    tion in this file to re-use across X restarts. If this option is not
	    provided, 3D VisionPro configuration will not be stored.

     --3dvision-display-type=3DVISION-DISPLAY-TYPE, --no-3dvision-display-type
	    When NVIDIA 3D Vision is enabled with a non 3D Vision ready display,
	    use  this  option  to  specify the display type. Valid values are: 0
	    (Assume it is a CRT), 1 (Assume it is a DLP) and 2 (Assume it  is  a
	    DLP TV and enable the checkerboard output).

     --base-mosaic, --no-base-mosaic
	    Enable or disable the "BaseMosaic" X configuration option.

     --restore-original-backup
	    Restore  a	backup	of  the X configuration that was made before any
	    changes were made by nvidia-xconfig, if such a backup is  available.
	    This  type of backup is made by nvidia-xconfig before it modifies an
	    X configuration file that it has not previously touched; this is as-
	    sumed to be an X configuration file that predates the involvement of
	    the NVIDIA X driver. As an example, nvidia-xconfig will  copy  an  X
	    configuration	 file	    at	     /etc/X11/xorg.conf       to
	    /etc/X11/xorg.conf.nvidia-xconfig-original the first time  it  makes
	    changes to that file.

     --allow-empty-initial-configuration, --no-allow-empty-initial-configuration
	    Allow  the	X  server  to start even if no connected display devices
	    could be detected.

     --inband-stereo-signaling, --no-inband-stereo-signaling
	    Enable or disable the "InbandStereoSignaling"  X  configuration  op-
	    tion.

     --force-yuv-420, --no-force-yuv-420
	    Enable  or	disable the "ForceYUV420" X configuration option. If the
	    current display and GPU both support uncompressed RGB  4:4:4  output
	    and  YUV  4:2:0  compressed  output  with the current mode, then RGB
	    4:4:4 output is selected by default. This option forces the  use  of
	    YUV 4:2:0 output (where supported) instead.

     --force-composition-pipeline=FORCE-COMPOSITION-PIPELINE, --no-force-compo-
     sition-pipeline
	    Enable or disable the "ForceCompositionPipeline" X configuration op-
	    tion.

     --force-full-composition-pipeline=FORCE-FULL-COMPOSITION-PIPELINE,
     --no-force-full-composition-pipeline
	    Enable or disable the "ForceFullCompositionPipeline" X configuration
	    option.

     --allow-hmd=ALLOW-HMD, --no-allow-hmd
	    Enable or disable the "AllowHMD" X configuration option.

     --prime, --no-prime
	    Enable  PRIME  for	the  generated X config file. Cannot be run with
	    --no-busid or --no-allow-empty-initial-configuration.  On  a  system
	    with  more than 1 GPU, specify the GPU to use for PRIME with --busid
	    or the first available will be chosen. Note that to enable PRIME  it
	    is	necessary  to  run "xrandr --setprovideroutputsource modesetting
	    NVIDIA-0" and "xrandr --auto" after completion.

EXAMPLES
     nvidia-xconfig
	    Reads an existing X config file and adapts it to use the NVIDIA dri-
	    ver.  If no X config file can be found, a  new  one  is  created  at
	    /etc/X11/xorg.conf with default settings.

     nvidia-xconfig --post-tree --metamode-orientation=clone
	    Reads  the	existing X configuration file, adds the MetaModeOrienta-
	    tion option, and then prints the resulting config file  to	standard
	    out in tree form.  The configuration file is not modified.

     nvidia-xconfig --enable-all-gpus
	    Examines  the system and configures an X screen for each display de-
	    vice it finds.

     nvidia-xconfig --mode=1600x1200
	    Adds a 1600x1200 mode to an existing X configuration.

     nvidia-xconfig --mode-list=1600x1200 1280x1024
	    Removes any existing modes from the X configuration file,  replacing
	    them with "1600x1200" and "1280x1024".

     nvidia-xconfig --metamodes=1024x768 +0+0, 1024x768 +1024+0
	    Adds  the MetaMode "1024x768 +0+0, 1024x768 +1024+0" to the existing
	    X configuration file, replacing any existing MetaModes X  configura-
	    tion option.

     nvidia-xconfig --only-one-x-screen --sli=Auto
	    Configures	the X server to have just one X screen that will use SLI
	    when available.

AUTHOR
     Aaron Plattner
     NVIDIA Corporation

SEE ALSO
     nvidia-settings(1), /usr/share/doc/NVIDIA_GLX-1.0/README.txt

COPYRIGHT
     Copyright (C) 2005-2010 NVIDIA Corporation.

nvidia-xconfig 440.100		   2021-03-01		       nvidia-xconfig(1)

home | help