FreeBSD Manual Pages
BHYVE(8) System Manager's Manual BHYVE(8) NAME bhyve -- run a guest operating system inside a virtual machine SYNOPSIS bhyve [-AaCDeHhPSuWwxY] [-c [[cpus=]numcpus][,sockets=n][,cores=n][,threads=n]] [-G [w][bind_address:]port] [-k config_file] [-K layout] [-l lpcdev[,conf]] [-m memsize[K|k|M|m|G|g|T|t]] [-o var=value] [-p vcpu:hostcpu] [-r file] [-s slot,emulation[,conf]] [-U uuid] vmname bhyve -l help bhyve -s help DESCRIPTION bhyve is a hypervisor that runs guest operating systems inside a vir- tual machine. Parameters such as the number of virtual CPUs, amount of guest memory, and I/O connectivity can be specified with command-line parameters. If not using a boot ROM, the guest operating system must be loaded with bhyveload(8) or a similar boot loader before running bhyve, otherwise, it is enough to run bhyve with a boot ROM of choice. bhyve runs until the guest operating system reboots or an unhandled hy- pervisor exit is detected. OPTIONS -A Generate ACPI tables. Required for FreeBSD/amd64 guests. -a The guest's local APIC is configured in xAPIC mode. The xAPIC mode is the default setting so this option is redun- dant. It will be deprecated in a future version. -C Include guest memory in core file. -c [setting ...] Number of guest virtual CPUs and/or the CPU topology. The default value for each of numcpus, sockets, cores, and threads is 1. The current maximum number of guest virtual CPUs is 16. If numcpus is not specified then it will be calculated from the other arguments. The topology must be consistent in that the numcpus must equal the product of sockets, cores, and threads. If a setting is specified more than once the last one has precedence. -D Destroy the VM on guest initiated power-off. -e Force bhyve to exit when a guest issues an access to an I/O port that is not emulated. This is intended for debug pur- poses. -G [w][bind_address:]port Start a debug server that uses the GDB protocol to export guest state to a debugger. An IPv4 TCP socket will be bound to the supplied bind_address and port to listen for debugger connections. Only a single debugger may be at- tached to the debug server at a time. If the option begins with `w', bhyve will pause execution at the first instruc- tion waiting for a debugger to attach. -H Yield the virtual CPU thread when a HLT instruction is de- tected. If this option is not specified, virtual CPUs will use 100% of a host CPU. -h Print help message and exit. -k config_file Set configuration variables from a simple, key-value config file. Each line of the config file is expected to consist of a config variable name, an equals sign -K layout Specify the keyboard layout. The value that can be speci- fied sets the file name in /usr/share/bhyve/kbdlayout. This specification only works when loaded with UEFI mode for VNC. When using a VNC client that supports QEMU Ex- tended Key Event Message (e.g. TigerVNC), this option isn't needed. When using a VNC client that doesn't support QEMU Extended Key Event Message (e.g. tightVNC), the layout de- faults to the US keyboard unless specified otherwise. (`='), and a value. No spaces are permitted between the variable name, equals sign, or value. Blank lines and lines starting with `#' are ignored. See bhyve_config(5) for more details. -l help Print a list of supported LPC devices. -l lpcdev[,conf] Allow devices behind the LPC PCI-ISA bridge to be config- ured. The only supported devices are the TTY-class devices com1, com2, com3, and com4, the boot ROM device bootrom, and the debug/test device pc-testdev. The possible values for the conf argument are listed in the -s flag description. -m memsize[K|k|M|m|G|g|T|t] Set the guest physical memory size This must be the same size that was given to bhyveload(8). The size argument may be suffixed with one of K, M, G or T (either upper or lower case) to indicate a multiple of kilobytes, megabytes, gigabytes, or terabytes. If no suf- fix is given, the value is assumed to be in megabytes. The default is 256M. -o var=value Set the configuration variable var to value. -P Force the guest virtual CPU to exit when a PAUSE instruc- tion is detected. -p vcpu:hostcpu Pin guest's virtual CPU vcpu to hostcpu. -r file Resume a guest from a snapshot. The guest memory contents are restored from file, and the guest device and vCPU state are restored from the file "file.kern". Note that the current snapshot file format requires that the configuration of devices in the new VM match the VM from which the snapshot was taken by specifying the same -s and -l options. The count of vCPUs and memory configura- tion are read from the snapshot. -S Wire guest memory. -s help Print a list of supported PCI devices. -s slot,emulation[,conf] Configure a virtual PCI slot and function. bhyve provides PCI bus emulation and virtual devices that can be attached to slots on the bus. There are 32 avail- able slots, with the option of providing up to 8 functions per slot. The slot can be specified in one of the following formats: • pcislot • pcislot:function • bus:pcislot:function The pcislot value is 0 to 31. The optional function value is 0 to 7. The optional bus value is 0 to 255. If not specified, the function value defaults to 0. If not speci- fied, the bus value defaults to 0. The emulation argument can be one of the following: hostbridge A simple host bridge. This is usually con- figured at slot 0, and is required by most guest operating systems. amd_hostbridge Emulation identical to hostbridge using a PCI vendor ID of AMD. passthru PCI pass-through device. virtio-net Virtio network interface. virtio-blk Virtio block storage interface. virtio-scsi Virtio SCSI interface. virtio-9p Virtio 9p (VirtFS) interface. virtio-rnd Virtio RNG interface. virtio-console Virtio console interface, which exposes multiple ports to the guest in the form of simple char devices for simple IO between the guest and host userspaces. virtio-input Virtio input interface. ahci AHCI controller attached to arbitrary de- vices. ahci-cd AHCI controller attached to an ATAPI CD/DVD. ahci-hd AHCI controller attached to a SATA hard drive. e1000 Intel e82545 network interface. uart PCI 16550 serial device. lpc LPC PCI-ISA bridge with COM1, COM2, COM3, and COM4 16550 serial ports, a boot ROM, and, optionally, the debug/test device. The LPC bridge emulation can only be con- figured on bus 0. fbuf Raw framebuffer device attached to VNC server. xhci eXtensible Host Controller Interface (xHCI) USB controller. nvme NVM Express (NVMe) controller. hda High Definition Audio Controller. The optional parameter conf describes the backend for de- vice emulations. If conf is not specified, the device emu- lation has no backend and can be considered unconnected. Network device backends: • tapN[,mac=xx:xx:xx:xx:xx:xx][,mtu=N] • vmnetN[,mac=xx:xx:xx:xx:xx:xx][,mtu=N] • netgraph,path=ADDRESS,peerhook=HOOK[,socket=NAME][,hook=HOOK][,mac=xx:xx:xx:xx:xx:xx][,mtu=N] If mac is not specified, the MAC address is derived from a fixed OUI and the remaining bytes from an MD5 hash of the slot and function numbers and the device name. The MAC address is an ASCII string in ethers(5) format. With virtio-net devices, the mtu parameter can be specified to inform the guest about the largest MTU that should be allowed, expressed in bytes. With netgraph backend, the path and peerhook parameters must be specified to set the destination node and corre- sponding hook. The optional parameters socket and hook may be used to set the ng_socket(4) node name and source hook. The ADDRESS, HOOK, and NAME must comply with netgraph(4) addressing rules. Block storage device backends: • /filename[,block-device-options] • /dev/xxx[,block-device-options] The block-device-options are: nocache Open the file with O_DIRECT. direct Open the file using O_SYNC. ro Force the file to be opened read-only. sectorsize=logical[/physical] Specify the logical and physical sector sizes of the emulated disk. The physical sector size is optional and is equal to the logical sector size if not explicitly specified. nodelete Disable emulation of guest trim requests via DIOCGDELETE requests. SCSI device backends: • /dev/cam/ctl[pp.vp][,scsi-device-options] The scsi-device-options are: iid=IID Initiator ID to use when sending requests to specified CTL port. The default value is 0. 9P device backends: • sharename=/path/to/share[,9p-device-options] The 9p-device-options are: ro Expose the share in read-only mode. TTY device backends: stdio Connect the serial port to the standard input and output of the bhyve process. /dev/xxx Use the host TTY device for serial port I/O. Boot ROM device backends: romfile[,varfile] Map romfile in the guest address space reserved for boot firmware. If varfile is provided, that file is also mapped in the boot firmware guest address space, and any modifications the guest makes will be saved to that file. Pass-through device backends: • pptN[,passthru-device-options] • bus/slot/function[,passthru-device-options] • pcibus:slot:function[,passthru-device-options] Connect to a PCI device on the host either named ppt N or at the selector described by slot, bus, and function num- bers. The passthru-device-options are: rom=romfile Add romfile as option ROM to the PCI device. The ROM will be loaded by firmware and should be capable of initializing the device. Guest memory must be wired using the -S option when a pass- through device is configured. The host device must have been reserved at boot-time using the pptdevs loader variable as described in vmm(4). Virtio console device backends: • port1=/path/to/port1.sock[,portN=/path/to/port2.sock...] A maximum of 16 ports per device can be created. Every port is named and corresponds to a Unix domain socket cre- ated by bhyve. bhyve accepts at most one connection per port at a time. Limitations: • Due to lack of destructors in bhyve, sockets on the filesystem must be cleaned up manually after bhyve ex- its. • There is no way to use the "console port" feature, nor the console port resize at present. • Emergency write is advertised, but no-op at present. Virtio input device backends: /dev/input/eventX Send input events of /dev/input/eventX to guest by VirtIO Input Interface. Framebuffer devices backends: • [rfb=ip-and-port][,w=width][,h=height][,vga=vgaconf][,wait][,password=password] Configuration options are defined as follows: rfb=ip-and-port (or tcp=ip-and-port) An IP address and a port VNC should listen on. There are two formats: • [IPv4:]port • [IPv6%zone]:port The default is to listen on localhost IPv4 ad- dress and default VNC port 5900. An IPv6 ad- dress must be enclosed in square brackets and may contain an optional zone identifier. w=width and h=height A display resolution, width and height, respec- tively. If not specified, a default resolution of 1024x768 pixels will be used. Minimal sup- ported resolution is 640x480 pixels, and maxi- mum is 1920x1200 pixels. vga=vgaconf Possible values for this option are io (de- fault), on , and off. PCI graphics cards have a dual personality in that they are standard PCI devices with BAR addressing, but may also implicitly decode legacy VGA I/O space (0x3c0-3df) and memory space (64KB at 0xA0000). The default io option should be used for guests that attempt to issue BIOS calls which result in I/O port queries, and fail to boot if I/O decode is disabled. The on option should be used along with the CSM BIOS capability in UEFI to boot traditional BIOS guests that require the legacy VGA I/O and memory regions to be available. The off option should be used for the UEFI guests that assume that VGA adapter is present if they detect the I/O ports. An example of such a guest is OpenBSD in UEFI mode. Please refer to the bhyve FreeBSD wiki page (https://wiki.freebsd.org/bhyve) for configura- tion notes of particular guests. wait Instruct bhyve to only boot upon the initiation of a VNC connection, simplifying the installa- tion of operating systems that require immedi- ate keyboard input. This can be removed for post-installation use. password=password This type of authentication is known to be cryptographically weak and is not intended for use on untrusted networks. Many implementa- tions will want to use stronger security, such as running the session over an encrypted chan- nel provided by IPsec or SSH. xHCI USB device backends: tablet A USB tablet device which provides precise cur- sor synchronization when using VNC. NVMe device backends: • devpath[,maxq=#][,qsz=#][,ioslots=#][,sectsz=#][,ser=#][,eui64=#][,dsm=opt] Configuration options are defined as follows: devpath Accepted device paths are: /dev/blockdev or /path/to/image or ram=size_in_MiB. maxq Max number of queues. qsz Max elements in each queue. ioslots Max number of concurrent I/O requests. sectsz Sector size (defaults to blockif sector size). ser Serial number with maximum 20 characters. eui64 IEEE Extended Unique Identifier (8 byte value). dsm DataSet Management support. Supported values are: auto, enable, and disable. AHCI device backends: • [[hd:|cd:]path][,nmrr=nmrr][,ser=#][,rev=#][,model=#] Configuration options are defined as follows: nmrr Nominal Media Rotation Rate, known as RPM. Value 1 will indicate device as Solid State Disk. Default value is 0, not report. ser Serial Number with maximum 20 characters. rev Revision Number with maximum 8 characters. model Model Number with maximum 40 characters. HD Audio device backends: • [play=playback][,rec=recording] Configuration options are defined as follows: play Playback device, typically /dev/dsp0. rec Recording device, typically /dev/dsp0. -U uuid Set the universally unique identifier (UUID) in the guest's System Management BIOS System Information structure. By default a UUID is generated from the host's hostname and vmname. -u RTC keeps UTC time. -W Force virtio PCI device emulations to use MSI interrupts instead of MSI-X interrupts. -w Ignore accesses to unimplemented Model Specific Registers (MSRs). This is intended for debug purposes. -x The guest's local APIC is configured in x2APIC mode. -Y Disable MPtable generation. vmname Alphanumeric name of the guest. This should be the same as that created by bhyveload(8). CONFIGURATION VARIABLES bhyve uses an internal tree of configuration variables to describe global and per-device settings. When bhyve starts, it parses command line options (including config files) in the order given on the command line. Each command line option sets one or more configuration vari- ables. For example, the -s option creates a new tree node for a PCI device and sets one or more variables under that node including the de- vice model and device model-specific variables. Variables may be set multiple times during this parsing stage with the final value overrid- ing previous values. Once all of the command line options have been processed, the configu- ration values are frozen. bhyve then uses the value of configuration values to initialize device models and global settings. More details on configuration variables can be found in bhyve_config(5). DEBUG SERVER The current debug server provides limited support for debuggers. Registers Each virtual CPU is exposed to the debugger as a thread. General purpose registers can be queried for each virtual CPU, but other registers such as floating-point and system registers cannot be queried. Memory Memory (including memory mapped I/O regions) can be read and written by the debugger. Memory operations use virtual addresses that are re- solved to physical addresses via the current virtual CPU's active ad- dress translation. Control The running guest can be interrupted by the debugger at any time (for example, by pressing Ctrl-C in the debugger). Single stepping is only supported on Intel CPUs supporting the MTRAP VM exit. Breakpoints are supported on Intel CPUs that support single stepping. Note that continuing from a breakpoint while interrupts are enabled in the guest may not work as expected due to timer interrupts firing while single stepping over the breakpoint. SIGNAL HANDLING bhyve deals with the following signals: SIGTERM Trigger ACPI poweroff for a VM EXIT STATUS Exit status indicates how the VM was terminated: 0 rebooted 1 powered off 2 halted 3 triple fault 4 exited due to an error EXAMPLES If not using a boot ROM, the guest operating system must have been loaded with bhyveload(8) or a similar boot loader before bhyve(4) can be run. Otherwise, the boot loader is not needed. To run a virtual machine with 1GB of memory, two virtual CPUs, a virtio block device backed by the /my/image filesystem image, and a serial port for the console: bhyve -c 2 -s 0,hostbridge -s 1,lpc -s 2,virtio-blk,/my/image \ -l com1,stdio -A -H -P -m 1G vm1 Run a 24GB single-CPU virtual machine with three network ports, one of which has a MAC address specified: bhyve -s 0,hostbridge -s 1,lpc -s 2:0,virtio-net,tap0 \ -s 2:1,virtio-net,tap1 \ -s 2:2,virtio-net,tap2,mac=00:be:fa:76:45:00 \ -s 3,virtio-blk,/my/image -l com1,stdio \ -A -H -P -m 24G bigvm Run an 8GB quad-CPU virtual machine with 8 AHCI SATA disks, an AHCI AT- API CD-ROM, a single virtio network port, an AMD hostbridge, and the console port connected to an nmdm(4) null-modem device. bhyve -c 4 \ -s 0,amd_hostbridge -s 1,lpc \ -s 1:0,ahci,hd:/images/disk.1,hd:/images/disk.2,\ hd:/images/disk.3,hd:/images/disk.4,\ hd:/images/disk.5,hd:/images/disk.6,\ hd:/images/disk.7,hd:/images/disk.8,\ cd:/images/install.iso \ -s 3,virtio-net,tap0 \ -l com1,/dev/nmdm0A \ -A -H -P -m 8G Run a UEFI virtual machine with a display resolution of 800 by 600 pix- els that can be accessed via VNC at: 0.0.0.0:5900. bhyve -c 2 -m 4G -w -H \ -s 0,hostbridge \ -s 3,ahci-cd,/path/to/uefi-OS-install.iso \ -s 4,ahci-hd,disk.img \ -s 5,virtio-net,tap0 \ -s 29,fbuf,tcp=0.0.0.0:5900,w=800,h=600,wait \ -s 30,xhci,tablet \ -s 31,lpc -l com1,stdio \ -l bootrom,/usr/local/share/uefi-firmware/BHYVE_UEFI.fd \ uefivm Run a UEFI virtual machine with a VNC display that is bound to all IPv6 addresses on port 5900. bhyve -c 2 -m 4G -w -H \ -s 0,hostbridge \ -s 4,ahci-hd,disk.img \ -s 5,virtio-net,tap0 \ -s 29,fbuf,tcp=[::]:5900,w=800,h=600 \ -s 30,xhci,tablet \ -s 31,lpc -l com1,stdio \ -l bootrom,/usr/local/share/uefi-firmware/BHYVE_UEFI.fd \ uefivm Run a UEFI virtual machine with a VARS file to save EFI variables. Note that bhyve will write guest modifications to the given VARS file. Be sure to create a per-guest copy of the template VARS file from /usr. bhyve -c 2 -m 4g -w -H \ -s 0,hostbridge \ -s 31,lpc -p com1,stdio \ -l bootrom,/usr/local/share/uefi-firmware/BHYVE_UEFI_CODE.fd,BHYVE_UEFI_VARS.fd uefivm SEE ALSO bhyve(4), netgraph(4), ng_socket(4), nmdm(4), vmm(4), bhyve_config(5), ethers(5), bhyvectl(8), bhyveload(8) Intel, 64 and IA-32 Architectures Software Developers Manual, Volume 3. HISTORY bhyve first appeared in FreeBSD 10.0. AUTHORS Neel Natu <neel@freebsd.org> Peter Grehan <grehan@freebsd.org> FreeBSD 13.2 December 8, 2022 BHYVE(8)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | CONFIGURATION VARIABLES | DEBUG SERVER | SIGNAL HANDLING | EXIT STATUS | EXAMPLES | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=bhyve&sektion=8&manpath=FreeBSD+13.2-RELEASE+and+Ports>