FreeBSD Manual Pages
BUILD(7) Miscellaneous Information Manual BUILD(7) NAME build -- General instructions on how to build the system DESCRIPTION The sources for the FreeBSD system and its applications are contained in three different directories, normally /usr/src, /usr/doc, and /usr/ports. These directories may be initially empty or non-existent until updated with Git (installed from packages with pkg(7) or from ports(7)). Directory /usr/src contains the "base system" sources, which is loosely defined as the things required to rebuild the system to a useful state. Directory /usr/doc contains the source for the sys- tem documentation, excluding the manual pages. Directory /usr/ports contains a tree that provides a consistent interface for building and installing third party applications. For more information about the ports build process, see ports(7). The make(1) command is used in each of these directories to build and install the things in that directory. Issuing the make(1) command in any directory issues the make(1) command recursively in all subdirecto- ries. With no target specified, the items in the directories are built and no further action is taken. A source tree is allowed to be read-only. As described in make(1), ob- jects are usually built in a separate object directory hierarchy speci- fied by the environment variable MAKEOBJDIRPREFIX, or under /usr/obj if variable MAKEOBJDIRPREFIX is not set. The canonical object directory is described in the documentation for the buildworld target below. The build may be controlled by defining make(1) variables described in the "ENVIRONMENT" section below, and by the variables documented in make.conf(5). The default components included in the build are specified in the file /etc/src.conf in the source tree. To override the default file, in- clude the SRCCONF option in the make steps, pointing to a custom src.conf file. For more information see src.conf(5). The following list provides the names and actions for the targets sup- ported by the build system: analyze Run Clang static analyzer against all objects and present output on stdout. check Run tests for a given subdirectory. The default directory used is ${.OBJDIR}, but the check directory can be changed with ${CHECKDIR}. checkworld Run the FreeBSD test suite on installed world. clean Remove any files created during the build process. cleandepend Remove the ${.OBJDIR}/${DEPENDFILE}* files generated by prior "make" and "make depend" steps. cleandir Remove the canonical object directory if it exists, or perform actions equivalent to "make clean cleandepend" if it does not. This target will also remove an obj link in ${.CURDIR} if that exists. It is advisable to run "make cleandir" twice: the first invocation will remove the canonical object directory and the second one will clean up ${.CURDIR}. depend Generate a list of build dependencies in file ${.OBJDIR}/${DEPENDFILE}. Per-object dependencies are generated at build time and stored in ${.OBJDIR}/${DEPENDFILE}.${OBJ}. install Install the results of the build to the appropriate loca- tion in the installation directory hierarchy specified in variable DESTDIR. obj Create the canonical object directory associated with the current directory. objlink Create a symbolic link to the canonical object directory in ${.CURDIR}. tags Generate a tags file using the program specified in the make(1) variable CTAGS. The build system supports ctags(1) and GNU Global. The other supported targets under directory /usr/src are: buildenv Spawn an interactive shell with environment variables set up for building the system or individual compo- nents. For cross-building the target architecture needs to be specified with make(1) variables TARGET_ARCH and TARGET. This target is only useful after a complete toolchain (including the compiler, linker, assembler, headers and libraries) has been built; see the toolchain tar- get below. buildworld Build everything but the kernel, configure files in etc, and release. The object directory can be changed from the default /usr/obj by setting the MAKEOBJDIRPREFIX make(1) variable. The actual build location prefix used depends on the WITH_UNIFIED_OBJDIR option from src.conf(5). If en- abled it is ${MAKEOBJDIRPREFIX}${.CURDIR}/${TARGET}.${TARGET_ARCH} for all builds. If disabled it is ${MAKEOBJDIRPREFIX}${.CURDIR} for native builds, and ${MAKEOBJDIRPREFIX}/${TARGET}.${TARGET_ARCH}${.CURDIR} for cross builds and native builds with variable CROSS_BUILD_TESTING set. cleanworld Attempt to clean up targets built by a preceding buildworld, or similar step built from this source di- rectory. cleanuniverse When WITH_UNIFIED_OBJDIR is enabled, attempt to clean up targets built by a preceding buildworld, universe, or similar step, for any architecture built from this source directory. distributeworld Distribute everything compiled by a preceding buildworld step. Files are placed in the directory hierarchy specified by make(1) variable DISTDIR. This target is used while building a release; see release(7). native-xtools This target builds a cross-toolchain for the given TARGET and TARGET_ARCH, as well as a select list of static userland tools for the host system. This is intended to be used in a jail where QEMU is used to improve performance by avoiding emulating binaries that do not need to be emulated. TARGET and TARGET_ARCH should be defined. native-xtools-install Installs the results to ${DESTDIR}/${NXTP} where NXTP defaults to nxb-bin. TARGET and TARGET_ARCH must be defined. packageworld Archive the results of distributeworld, placing the results in DISTDIR. This target is used while build- ing a release; see release(7). installworld Install everything built by a preceding buildworld step into the directory hierarchy pointed to by make(1) variable DESTDIR. If installing onto an NFS file system and running make(1) with the -j option, make sure that rpc.lockd(8) is running on both client and server. See rc.conf(5) on how to make it start at boot time. toolchain Create the build toolchain needed to build the rest of the system. For cross-architecture builds, this step creates a cross-toolchain. universe For each architecture, execute a buildworld followed by a buildkernel for all kernels for that architec- ture, including LINT. This command takes a long time. kernels Like universe with WITHOUT_WORLDS defined so only the kernels for each architecture are built. worlds Like universe with WITHOUT_KERNELS defined so only the worlds for each architecture are built. update Get updated sources as configured in make.conf(5). targets Print a list of supported TARGET / TARGET_ARCH pairs for world and kernel targets. tinderbox Execute the same targets as universe. In addition print a summary of all failed targets at the end and exit with an error if there were any. toolchains Create a build toolchain for each architecture sup- ported by the build system. xdev Builds and installs a cross-toolchain and sysroot for the given TARGET and TARGET_ARCH. The sysroot con- tains target library and headers. The target is an alias for xdev-build and xdev-install. The location of the files installed can be controlled with DESTDIR. The target location in DESTDIR is ${DESTDIR}/${XDTP} where XDTP defaults to /usr/${XDDIR} and XDDIR de- faults to ${TARGET_ARCH}-freebsd. xdev-build Builds for the xdev target. xdev-install Installs the files for the xdev target. xdev-links Installs autoconf-style symlinks to ${DESTDIR}/usr/bin pointing into the xdev toolchain in ${DESTDIR}/${XDTP}. Kernel specific build targets in /usr/src are: buildkernel Rebuild the kernel and the kernel modules. The ob- ject directory can be changed from the default /usr/obj by setting the MAKEOBJDIRPREFIX make(1) variable. installkernel Install the kernel and the kernel modules to direc- tory ${DESTDIR}/boot/kernel, renaming any pre-exist- ing directory with this name to kernel.old if it con- tained the currently running kernel. The target di- rectory under ${DESTDIR} may be modified using the INSTKERNNAME and KODIR make(1) variables. distributekernel Install the kernel to the directory ${DISTDIR}/kernel/boot/kernel. This target is used while building a release; see release(7). packagekernel Archive the results of distributekernel, placing the results in DISTDIR. This target is used while build- ing a release; see release(7). kernel Equivalent to buildkernel followed by installkernel kernel-toolchain Rebuild the tools needed for kernel compilation. Use this if you did not do a buildworld first. reinstallkernel Reinstall the kernel and the kernel modules, over- writing the contents of the target directory. As with the installkernel target, the target directory can be specified using the make(1) variable INSTKERNNAME. Convenience targets for cleaning up the install destination directory denoted by variable DESTDIR include: check-old Print a list of old files and directories in the sys- tem. delete-old Delete obsolete base system files and directories in- teractively. When -DBATCH_DELETE_OLD_FILES is speci- fied at the command line, the delete operation will be non-interactive. The variables DESTDIR, TARGET_ARCH and TARGET should be set as with "make installworld". delete-old-libs Delete obsolete base system libraries interactively. This target should only be used if no third party software uses these libraries. When -DBATCH_DELETE_OLD_FILES is specified at the command line, the delete operation will be non-interactive. The variables DESTDIR, TARGET_ARCH and TARGET should be set as with "make installworld". ENVIRONMENT Variables that influence all builds include: DEBUG_FLAGS Defines a set of debugging flags that will be used to build all userland binaries under /usr/src. When DEBUG_FLAGS is defined, the install and installworld targets install binaries from the current MAKEOBJDIRPREFIX without stripping, so that debugging information is retained in the installed binaries. DESTDIR The directory hierarchy prefix where built objects will be installed. If not set, DESTDIR defaults to the empty string. MAKEOBJDIRPREFIX Defines the prefix for directory names in the tree of built objects. Defaults to /usr/obj if not defined. This variable should only be set in the environment or /etc/src-env.conf and not via /etc/make.conf or /etc/src.conf or the command line. WITHOUT_WERROR If defined, compiler warnings will not cause the build to halt, even if the makefile says otherwise. WITH_CTF If defined, the build process will run the DTrace CTF conversion tools on built objects. Additionally, builds in /usr/src are influenced by the following make(1) variables: KERNCONF Overrides which kernel to build and install for the various kernel make targets. It defaults to GENERIC. KERNCONFDIR Overrides the directory in which KERNCONF and any files included by KERNCONF should be found. Defaults to sys/${ARCH}/conf. KERNFAST If set, the build target buildkernel defaults to set- ting NO_KERNELCLEAN, NO_KERNELCONFIG, and NO_KERNELOBJ. When set to a value other than 1 then KERNCONF is set to the value of KERNFAST. LOCAL_DIRS If set, this variable supplies a list of additional directories relative to the root of the source tree to build as part of the everything target. The directo- ries are built in parallel with each other, and with the base system directories. Insert a .WAIT directive at the beginning of the LOCAL_DIRS list to ensure all base system directories are built first. .WAIT may also be used as needed elsewhere within the list. LOCAL_ITOOLS If set, this variable supplies a list of additional tools that are used by the installworld and distributeworld targets. LOCAL_LIB_DIRS If set, this variable supplies a list of additional directories relative to the root of the source tree to build as part of the libraries target. The directo- ries are built in parallel with each other, and with the base system libraries. Insert a .WAIT directive at the beginning of the LOCAL_DIRS list to ensure all base system libraries are built first. .WAIT may also be used as needed elsewhere within the list. LOCAL_MTREE If set, this variable supplies a list of additional mtrees relative to the root of the source tree to use as part of the hierarchy target. LOCAL_LEGACY_DIRS If set, this variable supplies a list of additional directories relative to the root of the source tree to build as part of the legacy target. LOCAL_BSTOOL_DIRS If set, this variable supplies a list of additional directories relative to the root of the source tree to build as part of the bootstrap-tools target. LOCAL_TOOL_DIRS If set, this variable supplies a list of additional directories relative to the root of the source tree to build as part of the build-tools target. LOCAL_XTOOL_DIRS If set, this variable supplies a list of additional directories relative to the root of the source tree to build as part of the cross-tools target. PORTS_MODULES A list of ports with kernel modules that should be built and installed as part of the buildkernel and installkernel process. make PORTS_MODULES=emulators/virtualbox-ose-kmod kernel LOCAL_MODULES A list of external kernel modules that should be built and installed as part of the buildkernel and installkernel process. Defaults to the list of sub- directories of LOCAL_MODULES_DIR. LOCAL_MODULES_DIR The directory in which to search for the kernel mod- ules specified by LOCAL_MODULES. Each kernel module should consist of a directory containing a makefile. Defaults to ${LOCALBASE}/sys/modules. SRCCONF Specify a file to override the default /etc/src.conf. The src.conf file controls the components to build. See src.conf(5) STRIPBIN Command to use at install time when stripping bina- ries. Be sure to add any additional tools required to run STRIPBIN to the LOCAL_ITOOLS make(1) variable be- fore running the distributeworld or installworld tar- gets. See install(1) for more details. SUBDIR_OVERRIDE Override the default list of sub-directories and only build the sub-directory named in this variable. If combined with buildworld then all libraries and in- cludes, and some of the build tools will still build as well. Specifying -DNO_LIBS, and -DWORLDFAST will only build the specified directory as was done histor- ically. When combined with buildworld it is necesarry to override LOCAL_LIB_DIRS with any custom directories containing libraries. This allows building a subset of the system in the same way as buildworld does using its sysroot handling. This variable can also be use- ful when debugging failed builds. make some-target SUBDIR_OVERRIDE=foo/bar TARGET The target hardware platform. This is analogous to the "uname -m" output. This is necessary to cross- build some target architectures. For example, cross- building for ARM64 machines requires TARGET_ARCH=aarch64 and TARGET=arm64. If not set, TARGET defaults to the current hardware platform, un- less TARGET_ARCH is also set, in which case it de- faults to the appropriate value for that architecture. TARGET_ARCH The target machine processor architecture. This is analogous to the "uname -p" output. Set this to cross-build for a different architecture. If not set, TARGET_ARCH defaults to the current machine architec- ture, unless TARGET is also set, in which case it de- faults to the appropriate value for that platform. Typically, one only needs to set TARGET. Builds under directory /usr/src are also influenced by defining one or more of the following symbols, using the -D option of make(1): LOADER_DEFAULT_INTERP Defines what interpreter the default loader program will have. Valid values include "4th", "lua", and "simp". This creates the default link for /boot/loader to the loader with that interpreter. It also determines what interpreter is compiled into userboot. NO_CLEANDIR If set, the build targets that clean parts of the object tree use the equivalent of "make clean" in- stead of "make cleandir". NO_CLEAN If set, no object tree files are cleaned at all. This is the default when WITH_META_MODE is used with filemon(4) loaded. See src.conf(5) for more de- tails. Setting NO_CLEAN implies NO_KERNELCLEAN, so when NO_CLEAN is set no kernel objects are cleaned either. NO_CTF If set, the build process does not run the DTrace CTF conversion tools on built objects. NO_SHARE If set, the build does not descend into the /usr/src/share subdirectory (i.e., manual pages, lo- cale data files, timezone data files and other /usr/src/share files will not be rebuild from their sources). NO_KERNELCLEAN If set, the build process does not run "make clean" as part of the buildkernel target. NO_KERNELCONFIG If set, the build process does not run config(8) as part of the buildkernel target. NO_KERNELOBJ If set, the build process does not run "make obj" as part of the buildkernel target. NO_DOCUPDATE If set, the update process does not update the source of the FreeBSD documentation as part of the "make update" target. NO_LIBS If set, the libraries phase will be skipped. NO_OBJWALK If set, no object directories will be created. This should only be used if object directories were cre- ated in a previous build and no new directories are connected. NO_PORTSUPDATE If set, the update process does not update the Ports tree as part of the "make update" target. NO_WWWUPDATE If set, the update process does not update the www tree as part of the "make update" target. WORLDFAST If set, the build target buildworld defaults to set- ting NO_CLEAN, NO_OBJWALK, and will skip most boot- strap phases. It will only bootstrap libraries and build all of userland. This option should be used only when it is known that none of the bootstrap needs changed and that no new directories have been connected to the build. Builds under directory /usr/doc are influenced by the following make(1) variables: DOC_LANG If set, restricts the documentation build to the language subdirectories specified as its content. The default action is to build documentation for all languages. Builds using the universe and related targets are influenced by the following make(1) variables: JFLAG Pass the value of this variable to each make(1) in- vocation used to build worlds and kernels. This can be used to enable multiple jobs within a single ar- chitecture's build while still building each archi- tecture serially. MAKE_JUST_KERNELS Only build kernels for each supported architecture. MAKE_JUST_WORLDS Only build worlds for each supported architecture. WITHOUT_WORLDS Only build kernels for each supported architecture. WITHOUT_KERNELS Only build worlds for each supported architecture. UNIVERSE_TARGET Execute the specified make(1) target for each sup- ported architecture instead of the default action of building a world and one or more kernels. This variable implies WITHOUT_KERNELS. TARGETS Only build the listed targets instead of each sup- ported architecture. EXTRA_TARGETS In addition to the supported architectures, build the semi-supported architectures. A semi-supported architecture has build support in the FreeBSD tree, but receives significantly less testing and is gen- erally for fringe uses that do not have a wide ap- peal. FILES /usr/doc/Makefile /usr/doc/share/mk/doc.project.mk /usr/ports/Mk/bsd.port.mk /usr/ports/Mk/bsd.sites.mk /usr/share/examples/etc/make.conf /usr/src/Makefile /usr/src/Makefile.inc1 EXAMPLES For an "approved" method of updating your system from the latest sources, please see the "COMMON ITEMS" section in src/UPDATING. The following sequence of commands can be used to cross-build the sys- tem for the armv6 architecture on an amd64 host: cd /usr/src make TARGET_ARCH=armv6 buildworld buildkernel make TARGET_ARCH=armv6 DESTDIR=/clients/arm installworld installkernel HISTORY The build manpage first appeared in FreeBSD 4.3. SEE ALSO cc(1), install(1), make(1), make.conf(5), src.conf(5), arch(7), pkg(7), ports(7), release(7), tests(7), config(8), etcupdate(8), mergemaster(8), reboot(8), shutdown(8) AUTHORS Mike W. Meyer <mwm@mired.org> FreeBSD 13.2 August 10, 2021 BUILD(7)
NAME | DESCRIPTION | ENVIRONMENT | FILES | EXAMPLES | HISTORY | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=build&manpath=FreeBSD+13.2-RELEASE+and+Ports>