FreeBSD Manual Pages
GAMMURC(5) Gammu GAMMURC(5) NAME gammurc - gammu(1) configuration file SYNOPSIS On Linux, MacOS X, BSD and other Unix-like systems, the config file is searched in following order: 1. $XDG_CONFIG_HOME/gammu/config 2. ~/.config/gammu/config 3. ~/.gammurc 4. /etc/gammurc On Microsoft Windows: 1. %PROFILE%\Application Data\gammurc 2. .\gammurc DESCRIPTION Gammu requires configuration to be able to properly talk to your phone. gammu reads configuration from a config file. It's location is determined on runtime, see above for search paths. You can use gammu-config or gammu-detect to generate configuration file or start from Fully documented example. For hints about configuring your phone, you can check Gammu Phone Database <https://wammu.eu/phones/> to see what user users experienced. This file use ini file syntax, see ini. Configuration file for gammu can contain several sections - [gammu], [gammu1], [gammuN], ... Each section configures one connection setup and in default mode gammu tries all of them in numerical order. You can also spec- ify which configuration section to use by giving it's number ([gammu] has number 0) as a parameter to gammu and it will then use only this section. [gammu] This section is read by default unless you specify other on command line. Device connection parameters Connection Protocol which will be used to talk to your phone. For Nokia cables you want to use one of following: fbus serial FBUS connection dlr3 DLR-3 and compatible cables dku2 DKU-2 and compatible cables dku5 DKU-5 and compatible cables mbus serial MBUS connection If you use some non original cable, you might need to append -nodtr (eg. for ARK3116 based cables) or -nopower, but Gammu should be able to detect this automatically. For non-Nokia phones connected using cable you generally want: at generic AT commands based connection You can optionally specify speed of the connection, eg. at19200, but it is not needed for modern USB cables. For IrDA connections use one of following: irdaphonet Phonet connection for Nokia phones. irdaat AT commands connection for most of phones (this is not sup- ported on Linux). irdaobex OBEX (IrMC or file transfer) connection for most of phones. irdagnapbus GNapplet based connection for Symbian phones, see gnapplet. For Bluetooth connection use one of following: bluephonet Phonet connection for Nokia phones. bluefbus FBUS connection for Nokia phones. blueat AT commands connection for most of phones. blueobex OBEX (IrMC or file transfer) connection for most of phones. bluerfgnapbus GNapplet based connection for Symbian phones, see gnapplet. blues60 Connection to Series60 applet in S60 phones, see s60. New in version 1.29.90. New in version 1.36.7: Gammu now supports connecting using proxy command. You can also proxy the connection using shell command, for example to different host. This can be done using proxy connections: proxyphonet Phonet connection for Nokia phones. proxyfbus FBUS connection for Nokia phones. proxyat AT commands connection for most of phones. proxyobex OBEX (IrMC or file transfer) connection for most of phones. proxygnapbus GNapplet based connection for Symbian phones, see gnapplet. proxys60 Connection to Series60 applet in S60 phones, see s60. SEE ALSO: faq-config Device New in version 1.27.95. Device node or address of phone. It depends on used connection. For cables or emulated serial ports, you enter device name (for ex- ample /dev/ttyS0, /dev/ttyACM0, /dev/ircomm0, /dev/rfcomm0 on Linux, /dev/cuad0 on FreeBSD or COM1: on Windows). The special exception are DKU-2 and DKU-5 cables on Windows, where the device is automati- cally detected from driver information and this parameters is ig- nored. NOTE: Some USB modems expose several interfaces, in such cases Gammu works best with "User" one, you can find more information on <- http://www.dd-wrt.com/wiki/index.php/Mobile_Broadband>. For USB connections (currently only fbususb and dku2 on Linux), you can specify to which USB device Gammu should connect. You can either provide vendor/product IDs or device address on USB: Device = 0x1234:0x5678 # Match device by vendor and product id Device = 0x1234:-1 # Match device by vendor id Device = 1.10 # Match device by usb bus and device address Device = 10 # Match device by usb device address Device = serial:123456 # Match device by serial string NOTE: On Linux systems, you might lack permissions for some device nodes. You might need to be member of some group (eg. plugdev or dialout) or or add special udev rules to enable you access these devices as non-root. For Nokia phones you can put following file (also available in sources as contrib/udev/69-gammu-acl.rules) as /etc/udev/rules.d/69-gammu-acl.rules: # # udev rule to give users access to USB device to be used by Gammu # ACTION!="add|change", GOTO="gammu_acl_rules_end" KERNEL!="ttyACM[0-9]*", GOTO="gammu_acl_rules_end" SUBSYSTEM!="tty", GOTO="gammu_acl_rules_end" # Nokia devices ATTRS{manufacturer}=="Nokia", TAG+="uaccess" # Example for Sony Ericsson J108i Cedar # ATTRS{idVendor}=="0fce", ATTRS{idProduct}=="d14e", TAG+="uaccess" LABEL="gammu_acl_rules_end" In case your USB device appears as the serial port in the system (eg. /dev/ttyACM0 on Linux or COM5: on Windows), just use same setup as with serial port. For Bluetooth connection you have to enter Bluetooth address of your phone (you can list Bluetooth devices in range on Linux using hci- tool scan command). Optionally you can also force Gammu to use spec- ified channel by including channel number after slash. Before using Gammu, your device should be paired with computer or you should have set up automatic pairing. For Proxy connections, you need to specify command which should be executed. It is supposed to pass bidirectional communication from Gammu to the device. This can happen for example over network. For IrDA connections, this parameters is not used at all. If IrDA does not work on Linux, you might need to bring up the in- terface and enable discovery (you need to run these commands as root): ip l s dev irda0 up # Enables irda0 device sysctl net.irda.discovery=1 # Enables device discovery on IrDA NOTE: Native IrDA is not supported on Linux, you need to setup virtual serial port for it (eg. /dev/ircomm0) and use it same way as ca- ble. This can be usually achieved by loading modules ircomm-tty and irtty-sir: modprobe ircomm-tty modprobe irtty-sir SEE ALSO: faq-config Port Deprecated since version 1.27.95: Please use Device instead. Alias for Device, kept for backward compatibility. Model Do not use this parameter unless really needed! The only use case for this is when Gammu does not know your phone and misdetects it's features. The only special case for using model is to force special type of OBEX connection instead of letting Gammu try the best suited for se- lected operation: obexfs force using of file browsing service (file system support) obexirmc force using of IrMC service (contacts, calendar and notes support) obexnone none service chosen, this has only limited use for sending file (gammu sendfile command) mobex m-obex service for Samsung phones Use_Locking On Posix systems, you might want to lock serial device when it is being used using UUCP-style lock files. Enabling this option (set- ting to yes) will make Gammu honor these locks and create it on startup. On most distributions you need additional privileges to use locking (eg. you need to be member of uucp group). This option has no meaning on Windows. Connection options SynchronizeTime If you want to set time from computer to phone during starting con- nection. StartInfo This option allows one to set, that you want (setting yes) to see message on the phone screen or phone should enable light for a mo- ment during starting connection. Phone will not beep during starting connection with this option. This works only with some Nokia phones. Debugging options LogFile Path to file where information about communication will be stored. NOTE: For most debug levels (excluding errors) the log file is over- written on each execution. LogFormat Determines what all will be logged to LogFile. Possible values are: nothing no debug level text transmission dump in text format textall all possible info in text format textalldate all possible info in text format, with time stamp errors errors in text format errorsdate errors in text format, with time stamp binary transmission dump in binary format For debugging use either textalldate or textall, it contains all needed information to diagnose problems. Features Custom features for phone. This can be used as override when values coded in common/gsmphones.c are bad or missing. Consult in- clude/gammu-info.h for possible values (all GSM_Feature values with- out leading F_ prefix). Please report correct values to Gammu au- thors. Locales and character set options GammuCoding Forces using specified codepage (for example 1250 will force CP-1250 or utf8 for UTF-8). This should not be needed, Gammu detects it ac- cording to your locales. GammuLoc Path to directory with localisation files (the directory should con- tain LANG/LC_MESSAGES/gammu.mo). If gammu is properly installed it should find these files automatically. Advanced options Advanced options are used to alter default logic, when using these options the user is responsible for ensuring any settings are correct for the tar- get device and that they produce the desired behaviour. atgen_setCNMI For configurations using the generic AT command protocol it is pos- sible to override the default indicators used when a new SMS message is received. The value for the setting is a comma delimited list of single digits corresponding to the values for the AT+CNMI modem command. If a digit is not provided, or if the provided digit is outside of the acceptable range for the device the default value is used. For example setting atgen_setcnmi = ,,2 would set the third parame- ter of the CNMI command to the value 2, leaving the rest of the pa- rameters at default, and atgen_setcnmi = 1,,,1 would set the first and fourth parameters respectively. Other options DataPath Additional path where to search for data files. The default path is configured on build time (and defaults to /usr/share/data/gammu on Unix systems). Currently it is used only for searching files to up- load to phone using gammu install. EXAMPLES There is more complete example available in Gammu documentation, see gammu. Connection examples Gammu configuration for Nokia phone using DLR-3 cable: [gammu] device = /dev/ttyACM0 connection = dlr3 Gammu configuration for Sony-Ericsson phone (or any other AT compatible phone) connected using USB cable: [gammu] device = /dev/ttyACM0 connection = at Gammu configuration for Sony-Ericsson (or any other AT compatible phone) connected using bluetooth: [gammu] device = B0:0B:00:00:FA:CE connection = blueat Gammu configuration for phone which needs to manually adjust Bluetooth channel to use channel 42: [gammu] device = B0:0B:00:00:FA:CE/42 connection = blueat Working with multiple phones Gammu can be configured for multiple phones (however only one connection is used at one time, you can choose which one to use with gammu -s parameter). Configuration for phones on three serial ports would look like following: [gammu] device = /dev/ttyS0 connection = at [gammmu1] device = /dev/ttyS1 connection = at [gammmu2] device = /dev/ttyS2 connection = at Connecting to remote phone New in version 1.36.7. You can connect using Gammu to phone running on different host. This can be achieved using proxy connection, which executes command to forward bi-di- rectional communication with the phone. [gammu] device = ssh root@my.router /usr/local/bin/myscript /dev/ttyUSB0 connection = proxyat You can find sample script which can be used on the remote side in con- trib/proxy/gammu-backend. Fully documented example You can find this sample file as docs/config/gammurc in Gammu sources. ; This is a sample ~/.gammurc file. ; In Unix/Linux copy it into your home directory and name it .gammurc ; or into /etc and name it gammurc ; In Win32 copy it into directory with Gammu.exe and name gammurc ; More about parameters later ; Anything behind ; or # is comment. ; ----------------------------------------------------------------------------- [gammu] device = com8: connection = irdaphonet ; Do not use model configuration unless you really need it ;model = 6110 ;synchronizetime = yes ;logfile = gammulog ;logformat = textall ;use_locking = yes ;gammuloc = locfile ;startinfo = yes ;gammucoding = utf8 ;usephonedb = yes [gammu1] device = com8: ;model = 6110 connection = fbusblue ;synchronizetime = yes ;logfile = gammulog ;logformat = textall ;use_locking = yes ;gammuloc = locfile ;startinfo = yes ;gammucoding = utf8 ; Step 1. Please find required Connection parameter and look into assigned ; with it device type. With some Connection you must set concrete model ; ================================================================ cables ===== ; New Nokia protocol for FBUS/DAU9P ; Connection "fbus", device type serial ; New Nokia protocol for DLR3/DLR3P ; Connection "fbusdlr3"/"dlr3", device type serial ; New Nokia protocol for DKU2 (and phone with USB converter on phone mainboard ; like 6230) ; Connection "dku2phonet"/"dku2", device type dku2 on Windows ; Connection "fbususb" on Linux ; New Nokia protocol for DKU5 (and phone without USB converter on phone ; mainboard like 5100) ; Connection "dku5fbus"/"dku5", device type dku5 ; New Nokia protocol for PL2303 USB cable (and phone without USB converter ; on phone mainboard like 5100) ; Connection "fbuspl2303", device type usb ; Old Nokia protocol for MBUS/DAU9P ; Connection "mbus", device type serial ; Variants: ; You can modify a bit behaviour of connection using additional flags ; specified just after connection name like connection-variant. ; If you're using ARK3116 cable (or any other which does not like dtr ; handling), you might need -nodtr variant of connection, eg. dlr3-nodtr. ; If cable you use is not powered over DTR/RTS, try using -nopower variant of ; connection, eg. fbus-nopower. ; ----------------------------------------------------------------------------- ; AT commands for DLR3, DKU5 or other AT compatible cable (8 bits, None ; parity, no flow control, 1 stop bit). Used with Nokia, Alcatel, Siemens, etc. ; Connection "at19200"/"at115200"/.., device type serial ; AT commands for DKU2 cable ; Connection "dku2at", device type dku2 ; ============================================================== infrared ===== ; Nokia protocol for infrared with Nokia 6110/6130/6150 ; Connection "fbusirda"/"infrared", device type serial ; Nokia protocol for infrared with other Nokia models ; Connection "irdaphonet"/"irda", device type irda ; ----------------------------------------------------------------------------- ; AT commands for infrared. Used with Nokia, Alcatel, Siemens, etc. ; Connection "irdaat", device type irda ; ----------------------------------------------------------------------------- ; OBEX for infrared ; Connection "irdaobex", device type irda. ; ============================================================= Bluetooth ===== ; Nokia protocol with serial device set in BT stack (WidComm, other) from ; adequate service and Nokia 6210 ; Connection "fbusblue", device type serial ; Nokia protocol with serial device set in BT stack (WidComm, other) from ; adequate service and other Nokia models ; Connection "phonetblue", device type serial ; ----------------------------------------------------------------------------- ; Nokia protocol for Bluetooth stack with Nokia 6210 ; Connection "bluerffbus", device type BT ; Nokia protocol for Bluetooth stack with DCT4 Nokia models, which don't inform ; about services correctly (6310, 6310i with firmware lower than 5.50, 8910,..) ; Connection "bluerfphonet", device type BT ; Nokia protocol for Bluetooth stack with other DCT4 Nokia models ; Connection "bluephonet", device type BT ; ----------------------------------------------------------------------------- ; AT commands for Bluetooth stack and 6210 / DCT4 Nokia models, which don't ; inform about BT services correctly (6310, 6310i with firmware lower ; than 5.50, 8910,..) ; Connection "bluerfat", device type BT ; AT commands for Bluetooth stack with other phones (Siemens, other Nokia,etc.) ; Connection "blueat", device type BT ; ----------------------------------------------------------------------------- ; OBEX for Bluetooth stack with DCT4 Nokia models, which don't inform about ; BT services correctly (6310, 6310i with firmware lower than 5.50, 8910,...) ; Connection "bluerfobex", device type BT ; OBEX for Bluetooth stack with other phones (Siemens, other Nokia, etc.) ; Connection "blueobex", device type BT. ; ----------------------------------------------------------------------------- ; Connection "bluerfgnapbus", device type BT, model "gnap" ; Connection "irdagnapbus", device type irda, model "gnap" ; Step2. According to device type from Step1 and used OS set Port parameter ; ----------------------------------------------------------------------------- ; Port type | "Port" parameter in Windows/DOS | "Port" parameter in Linux/Unix ; ----------|---------------------------------|-------------------------------- ; serial | "com*:" | "/dev/ttyS*" ; | (example "com1:") | (example "/dev/ttyS1") ; | | or "/dev/tts/**" (with DevFS) ; | | virtual serial ports like ; | | "/dev/ircomm*" or "/dev/rfcomm*" ; ----------|---------------------------------|-------------------------------- ; irda | ignored (can be empty) | ignored (can be empty) ; ----------|---------------------------------|-------------------------------- ; BT | Bluetooth device address (example "00:11:22:33:44:55"). ; | Optionally you can also include channel after slash ; | (example "00:11:22:33:44:55/12"). Can be also empty. ; ----------|---------------------------------|-------------------------------- ; dku2 | ignored (can be empty) | /dev/ttyUSB* or /dev/ttyACM* ; ----------|---------------------------------|-------------------------------- ; dku5 | ignored (can be empty) | connection with it not possible ; ----------|---------------------------------|-------------------------------- ; usb | connection with it not possible | "/dev/ttyUSB*" ; Step3. Set other config parameters ; ----------------------------------------------------------------------------- ; Parameter name | Description ; ----------------|------------------------------------------------------------ ; Model | Should not be used unless you have a good reason to do so. ; | If Gammu doesn't recognize your phone model, put it here. ; | Example values: "6110", "6150", "6210", "8210" ; SynchronizeTime | if you want to set time from computer to phone during ; | starting connection. Do not rather use this option when ; | when to reset phone during connection (in some phones need ; | to set time again after restart) ; GammuLoc | name of localisation file ; StartInfo | this option allows one to set, that you want (setting "yes") ; | to see message on the phone screen or phone should enable ; | light for a moment during starting connection. Phone ; | WON'T beep during starting connection with this option. ; GammuCoding | forces using specified codepage (in win32 - for example ; | "1250" will force CP1250) or UTF8 (in Linux - "utf8") ; ----------------|------------------------------------------------------------ ; Logfile | Use, when want to have logfile from communication. ; Logformat | What debug info and format should be used: ; | "nothing" - no debug level (default) ; | "text" - transmission dump in text format ; | "textall" - all possible info in text format ; | "errors" - errors in text format ; | "binary" - transmission dump in binary format ; ----------------|------------------------------------------------------------ ; Features | Custom features for phone. This can be used as override ; | when values coded in common/gsmphones.c are bad or ; | missing. Consult include/gammu-info.h for possible values ; | (all Feature values without leading F_ prefix). ; | Please report correct values to Gammu authors. ; ----------------|------------------------------------------------------------ ; Use_Locking | under Unix/Linux use "yes", if want to lock used device ; | to prevent using it by other applications. In win32 ignored ; vim: et ts=4 sw=4 sts=4 tw=78 spell spelllang=en_us AUTHOR Michal AihaA <michal@cihar.com> COPYRIGHT 2009-2015, Michal AihaA <michal@cihar.com> 1.42.0 Oct 03, 2020 GAMMURC(5)
NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | AUTHOR | COPYRIGHT
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=gammurc&sektion=5&manpath=FreeBSD+14.1-RELEASE+and+Ports>