FreeBSD Manual Pages
ATP(4) Kernel Interfaces Manual ATP(4) NAME atp -- Apple touchpad driver SYNOPSIS To compile this driver into the kernel, place the following lines into your kernel configuration file: device atp device hid device usb Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): atp_load="YES" DESCRIPTION The atp driver provides support for the Apple Internal Trackpad device found in many Apple laptops. Older (Fountain/Geyser) and the newer (Wellspring) trackpad families are all supported through a unified dri- ver. The driver simulates a three-button mouse using multi-finger tap detec- tion. Single finger tap generates a left-button click; two-finger tap maps to the middle button; whereas a three-finger tap gets treated as a right button click. There is support for 2-finger horizontal scrolling, which translates to page-back/forward events; vertical multi-finger scrolling emulates the mouse wheel. A double-tap followed by a drag is treated as a selection gesture; a virtual left-button click is assumed for the lifespan of the drag. atp supports dynamic reconfiguration using sysctl(8); through nodes un- der hw.usb.atp. Pointer sensitivity can be controlled using the sysctl tunable hw.usb.atp.scale_factor. Smaller values of scale_factor result in faster movement. A simple high-pass filter is used to reduce con- tributions from small movements; the threshold for this filter may be controlled by hw.usb.atp.small_movement. The maximum tolerable dura- tion of a touch gesture is controlled by hw.usb.atp.touch_timeout (in microseconds); beyond this period, touches are considered to be slides. (This conversion also happens when a finger stroke accumulates at least hw.usb.atp.slide_min_movement movement (in mickeys). The maximum time (in microseconds) to allow an association between a double- tap and drag gesture may be controlled by hw.usb.atp.double_tap_threshold. Should one want to disable tap detection and rely only upon physical button presses, set the following sysctl to a value of 2 hw.usb.atp.tap_minimum. HARDWARE The atp driver provides support for the following Product IDs: • PowerBooks, iBooks (IDs: 0x020e, 0x020f, 0x0210, 0x0214, 0x0215, 0x0216) • Core Duo MacBook & MacBook Pro (IDs: 0x0217, 0x0218, 0x0219) • Core2 Duo MacBook & MacBook Pro (IDs: 0x021a, 0x021b, 0x021c) • Core2 Duo MacBook3,1 (IDs: 0x0229, 0x022a, 0x022b) • 12 inch PowerBook and iBook (IDs: 0x030a, 0x030b) • 15 inch PowerBook (IDs: 0x020e, 0x020f, 0x0215) • 17 inch PowerBook (ID: 0x020d) • Almost all recent Macbook-Pros and Airs (IDs: 0x0223, 0x0223, 0x0224, 0x0224, 0x0225, 0x0225, 0x0230, 0x0230, 0x0231, 0x0231, 0x0232, 0x0232, 0x0236, 0x0236, 0x0237, 0x0237, 0x0238, 0x0238, 0x023f, 0x023f, 0x0240, 0x0241, 0x0242, 0x0243, 0x0244, 0x0245, 0x0246, 0x0247, 0x0249, 0x024a, 0x024b, 0x024c, 0x024d, 0x024e, 0x0252, 0x0252, 0x0253, 0x0253, 0x0254, 0x0254, 0x0259, 0x025a, 0x025b, 0x0262, 0x0262, 0x0263, 0x0264, 0x0290, 0x0291, 0x0292) To discover the product-id of a touchpad, search for 'Trackpad' in the output of lshal(1) and look up the property usb_device.product_id. FILES atp creates a blocking pseudo-device file, /dev/atp0, which presents the mouse as a sysmouse or mousesystems type device--see moused(8) for an explanation of these mouse types. SEE ALSO sysmouse(4), usb(4), loader.conf(5), xorg.conf(5) (ports/x11/xorg), moused(8), sysctl(8) AUTHORS The atp driver was written by Rohit Grover <rgrover1@gmail.com>. FreeBSD 14.3 February 24, 2014 ATP(4)
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | FILES | SEE ALSO | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=atp&manpath=FreeBSD+14.3-RELEASE+and+Ports>