FreeBSD Manual Pages
EQN(7) Miscellaneous Information Manual EQN(7) NAME eqn -- eqn language reference for mandoc DESCRIPTION The eqn language is an equation-formatting language. It is used within mdoc(7) and man(7) Unix manual pages. It describes the structure of an equation, not its mathematical meaning. This manual describes the eqn language accepted by the mandoc(1) utility, which corresponds to the Second Edition eqn specification (see "SEE ALSO" for references). An equation starts with an input line containing exactly the characters `.EQ', may contain multiple input lines, and ends with an input line containing exactly the characters `.EN'. Equivalently, an equation can be given in the middle of a single text input line by surrounding it with the equation delimiters defined with the delim statement. The equation grammar is as follows, where quoted strings are case-sen- sitive literals in the input: eqn : box | eqn box box : text | "{" eqn "}" | "define" text text | "ndefine" text text | "tdefine" text text | "gfont" text | "gsize" text | "set" text text | "undef" text | "sqrt" box | box pos box | box mark | "matrix" "{" [col "{" list "}"]* "}" | pile "{" list "}" | font box | "size" text box | "left" text eqn ["right" text] col : "lcol" | "rcol" | "ccol" | "col" text : [^space\"]+ | \".*\" pile : "lpile" | "cpile" | "rpile" | "pile" pos : "over" | "sup" | "sub" | "to" | "from" mark : "dot" | "dotdot" | "hat" | "tilde" | "vec" | "dyad" | "bar" | "under" font : "roman" | "italic" | "bold" | "fat" list : eqn | list "above" eqn space : [\^~ \t] White-space consists of the space, tab, circumflex, and tilde charac- ters. It is required to delimit tokens consisting of alphabetic char- acters and it is ignored at other places. Braces and quotes also de- limit tokens. If within a quoted string, these space characters are retained. Quoted strings are also not scanned for keywords, glyph names, and expansion of definitions. To print a literal quote charac- ter, it can be prepended with a backslash or expressed with the \(dq escape sequence. Subequations can be enclosed in braces to pass them as arguments to op- eration keywords, overriding standard operation precedence. Braces can be nested. To set a brace verbatim, it needs to be enclosed in quotes. The following text terms are translated into a rendered glyph, if available: alpha, beta, chi, delta, epsilon, eta, gamma, iota, kappa, lambda, mu, nu, omega, omicron, phi, pi, psi, rho, sigma, tau, theta, upsilon, xi, zeta, DELTA, GAMMA, LAMBDA, OMEGA, PHI, PI, PSI, SIGMA, THETA, UPSILON, XI, inter (intersection), union (union), prod (prod- uct), int (integral), sum (summation), grad (gradient), del (vector differential), times (multiply), cdot (center-dot), nothing (zero-width space), approx (approximately equals), prime (prime), half (one-half), partial (partial differential), inf (infinity), >> (much greater), << (much less), <- (left arrow), -> (right arrow), +- (plus-minus), != (not equal), == (equivalence), <= (less-than-equal), and >= (more-than- equal). The character escape sequences documented in mandoc_char(7) can be used, too. The following control statements are available: define Replace all occurrences of a key with a value. Its syntax is as follows: define key cvalc The first character of the value string, c, is used as the de- limiter for the value val. This allows for arbitrary enclosure of terms (not just quotes), such as define foo 'bar baz' define foo cbar bazc It is an error to have an empty key or val. Note that a quoted key causes errors in some eqn implementations and should not be considered portable. It is not expanded for replacements. De- finitions may refer to other definitions; these are evaluated recursively when text replacement occurs and not when the defi- nition is created. Definitions can create arbitrary strings, for example, the fol- lowing is a legal construction. define foo 'define' foo bar 'baz' Self-referencing definitions will raise an error. The ndefine statement is a synonym for define, while tdefine is discarded. delim This statement takes a string argument consisting of two bytes, to be used as the opening and closing delimiters for equations in the middle of text input lines. Conventionally, the dollar sign is used for both delimiters, as follows: .EQ delim $$ .EN An equation like $sin pi = 0$ can now be entered in the middle of a text input line. The special statement delim off temporarily disables previously declared delimiters and delim on reenables them. gfont Set the default font of subsequent output. Its syntax is as follows: gfont font In mandoc, this value is discarded. gsize Set the default size of subsequent output. Its syntax is as follows: gsize [+|-]size The size value should be an integer. If prepended by a sign, the font size is changed relative to the current size. set Set an equation mode. In mandoc, both arguments are thrown away. Its syntax is as follows: set key val The key and val are not expanded for replacements. This state- ment is a GNU extension. undef Unset a previously-defined key. Its syntax is as follows: define key Once invoked, the definition for key is discarded. The key is not expanded for replacements. This statement is a GNU exten- sion. Operation keywords have the following semantics: above See pile. bar Draw a line over the preceding box. bold Set the following box using bold font. ccol Like cpile, but for use in matrix. cpile Like pile, but with slightly increased vertical spacing. dot Set a single dot over the preceding box. dotdot Set two dots (dieresis) over the preceding box. dyad Set a dyad symbol (left-right arrow) over the preceding box. fat A synonym for bold. font Set the second argument using the font specified by the first argument; currently not recognized by the mandoc(1) eqn parser. from Set the following box below the preceding box, using a slightly smaller font. Used for sums, integrals, limits, and the like. hat Set a hat (circumflex) over the preceding box. italic Set the following box using italic font. lcol Like lpile, but for use in matrix. left Set the first argument as a big left delimiter before the sec- ond argument. As an optional third argument, right can follow. In that case, the fourth argument is set as a big right delim- iter after the second argument. lpile Like cpile, but subequations are left-justified. matrix Followed by a list of columns enclosed in braces. All columns need to have the same number of subequations. The columns are set as a matrix. The difference compared to multiple subse- quent pile operators is that in a matrix, corresponding sube- quations in all columns line up horizontally, while each pile does vertical spacing independently. over Set a fraction. The preceding box is the numerator, the fol- lowing box is the denominator. pile Followed by a list of subequations enclosed in braces, the subequations being separated by above keywords. Sets the sube- quations one above the other, each of them centered. Typically used to represent vectors in coordinate representation. rcol Like rpile, but for use in matrix. right See left; right cannot be used without left. To set a big right delimiter without a big left delimiter, the following construction can be used: left "" box right delimiter roman Set the following box using the default font. rpile Like cpile, but subequations are right-justified. size Set the second argument with the font size specified by the first argument; currently ignored by mandoc(1). By prepending a plus or minus sign to the first argument, the font size can be selected relative to the current size. sqrt Set the square root of the following box. sub Set the following box as a subscript to the preceding box. sup Set the following box as a superscript to the preceding box. As a special case, if a sup clause immediately follows a sub clause as in mainbox sub subbox sup supbox both are set with respect to the same mainbox, that is, supbox is set above subbox. tilde Set a tilde over the preceding box. to Set the following box above the preceding box, using a slightly smaller font. Used for sums and integrals and the like. As a special case, if a to clause immediately follows a from clause as in mainbox from frombox to tobox both are set below and above the same mainbox. under Underline the preceding box. vec Set a vector symbol (right arrow) over the preceding box. The binary operations from, to, sub, and sup group to the right, that is, mainbox sup supbox sub subbox is the same as mainbox sup {supbox sub subbox} and different from {mainbox sup supbox} sub subbox. By contrast, over groups to the left. In the following list, earlier operations bind more tightly than later operations: 1. dyad, vec, under, bar, tilde, hat, dot, dotdot 2. fat, roman, italic, bold, size 3. sub, sup 4. sqrt 5. over 6. from, to COMPATIBILITY This section documents the compatibility of mandoc eqn and the troff eqn implementation (including GNU troff). - The text string `\"' is interpreted as a literal quote in troff. In mandoc, this is interpreted as a comment. - In troff, The circumflex and tilde white-space symbols map to fixed-width spaces. In mandoc, these characters are synonyms for the space character. - The troff implementation of eqn allows for equation alignment with the mark and lineup tokens. mandoc discards these tokens. The back n, fwd n, up n, and down n commands are also ignored. SEE ALSO mandoc(1), man(7), mandoc_char(7), mdoc(7), roff(7) Brian W. Kernighan and Lorinda L. Cherry, "System for Typesetting Mathematics", Communications of the ACM, 18, pp. 151-157, March, 1975. Brian W. Kernighan and Lorinda L. Cherry, Typesetting Mathematics, User's Guide, 1976. Brian W. Kernighan and Lorinda L. Cherry, Typesetting Mathematics, User's Guide (Second Edition), 1978. HISTORY The eqn utility, a preprocessor for troff, was originally written by Brian W. Kernighan and Lorinda L. Cherry in 1975. The GNU reimplemen- tation of eqn, part of the GNU troff package, was released in 1989 by James Clark. The eqn component of mandoc(1) was added in 2011. AUTHORS This eqn reference was written by Kristaps Dzonsons <kristaps@bsd.lv>. FreeBSD 14.3 January 10, 2020 EQN(7)
NAME | DESCRIPTION | COMPATIBILITY | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=eqn&sektion=7&manpath=FreeBSD+14.3-RELEASE+and+Ports>