FreeBSD Manual Pages
EZJAIL(7) User's Supplementary Documents EZJAIL(7) NAME ezjail -- Jail administration framework. SYNOPSIS ezjail-admin command arguments... OVERVIEW The ezjail commands provide a simple way to create multiple jails using FreeBSD's jail system. It simplifies jail administration effort and minimizes jail system resource usage. If you are not familiar with the FreeBSD jail concept, please refer to jail(8) before continuing. For additional design information, see the ezjail site at http://erdgeist.org/arts/software/ezjail. DESCRIPTION The ezjail system enables the system administrator to create multiple OS-level virtualization containers called jails. Services like web servers, mail servers, FTP servers, are typically under frequent attack from the public Internet and are exposed to possible compromise. The typical usage of jails is to run a single service in each jail and if that service becomes compromised the rest of the jails and the host system are protected from also being compromised. The major shortcoming of jails is that each jail has its own copy of the world. This eats disk space, inodes, and more importantly, prevents the sharing of binaries images between jails, thus increasing the mem- ory pressure on the host system. In addition, this causes a major ad- ministration headache when comes the time to update the host system, as each jail needs to be updated independently. Ezjail addresses these problems by creating a single basejail (a read- only nullfs(4) mounted directory) populated with the same binaries as the host system which is then shared across all the other service jails created by ezjail. Is is possible to update the base jail (and thus all the jails) in a single ezjail command. Typical usage of jails include separation of services, creating test environments, consolidation of different services on a single physical host, and more. EZJAIL SYSTEM The administrative interface to the ezjail system is the ezjail-admin(8) command. It is used to install the ezjail environment, create new jails, archive, restore, delete and update jails, open a jail console, and list the status of all the jails. See below for exam- ple usage, and refer to its man page for complete usage details. Ezjail reads its configuration from its ezjail.conf(5). Normally it will not be necessary to edit this file, as some sane defaults are pro- vided. A sample configuration is installed as /usr/local/etc/ezjail.conf.sample. A script is also installed as ezjail in the rc.d system to allow jails under ezjails control to be started at boot time, given ezjail is en- abled by setting the rc.conf(5) variable "$ezjail_enable" to "YES". WHAT'S IN A JAIL The life of an ezjail installation The base jail is first created by running update or install. Example usage of this command is section "EXAMPLES". This will create the base jail, setup a template jail used to setting up new jails, install an example flavour (see below) and configure miscellaneous things. This step is necessary before using the ezjail system. In particular, it is not possible to create new jails without initializing the base jail in advance. Once the base jail has been created, new jails may be created with create. A new jail is defined by its name and can have one or multiple IP addresses. Creating a new jail involves copying the template jail to the new location, configuring nullfs(4) mounts for giving access to the base jail, and little more. A jail that has just be created occupies about 2MB of disk space ; when running, only a handful of daemons (cron, syslog, sendmail mainly) use memory. After their creation, jails may be archived to a pax(1) archive, re- stored, and eventually deleted. When a new version of FreeBSD is released, or when an errata is pub- lished, only the base jail need to be updated. Both source upgrades and binary upgrades (using freebsd-update(8)) are supported. The ports(7) collection may also be updated by ezjail, but individual ports need to be upgraded individually by the administrator. Anatomy of a Jail In the ezjail system, a jail is defined by a root directory and a cou- ple of configuration values, mainly a name and IP addresses. The root directory of the jail contains only the jail-specific files: configura- tion files, data files, and ports installed by the administrator. The base system is shared amongst all jails, using a nullfs(4) mount. This saves space and inodes (especially when the ports collection in made available to the jails), and also memory, as the kernel is now able to share copies of running programs between the jails. Unless the variable "$ezjail_jaildir" has been set by the administra- tor, the root directory of the jail is kept in /usr/jails, which there- fore needs to reside on a partition big enough. There are also file-based jails, in which the storage space for the jail is kept in a file mounted with mdconfig(8). There are two advan- tages to image jails. The amount of disk space allocated to the jail is limited, while normal jails have no bound on the amount of disk space they use. On the other hand, the space dedicated to the jail is no longer available to the host, even if the jail doesn't use all its al- located space. Image jails may also be encrypted using bde(4) or geli(8), depending on the options given at creation time. Using ZFS To give more precise control over the resources consumed by a jail, ez- jail allows putting each jail in its own zfs(8) filesystem. See "Jail Creation Examples" for details. Also, ezjail can be configured to install its basejail and the accompa- nying template for all new jails into its own filesystem. Set the "$ezjail_use_zfs" variable in your ezjail.conf to "YES" before running update or install. To use any zfs feature in ezjail, you first need to configure the des- tination ZFS filesystem using the "$ezjail_jailzfs" variable. You can use ZFS jails without installing the basejail into its own ZFS filesystem and vice versa. In order to create ZFS jails by default, set the "$ezjail_use_zfs_for_jails" variable to "YES". Per-Jail options As we saw earlier, a jail is described by a file in /usr/local/etc/ezjail/. This file has the same name as the jail it configures. It is a set of variables interpreted by sh(1), much like rc.conf(5) is. This file is created at the same time as the jail, and usually doesn't require tweaking from the administrator. In addition to the variables described below, any variable used by the init script /etc/rc.d/jail may be added manually by the administrator. The following variables are handled by ezjail, replacing JAILNAME with the actual name of the jail: jail_JAILNAME_hostname The hostname of the jail. Defaults to the name of the jail, un- less special characters needed to be stripped. jail_JAILNAME_ip The IP addresses the jail is allowed to use. Since FreeBSD 7.2, several IP addresses may be given, separated by commas. Since FreeBSD 9.0 each IP address can be prefixed by an inter- face name followed by the pipe symbol. It will then automati- cally be configured on that interface when the jail is started and removed from the interface when the jail stops. (You will probably have to escape the pipe symbol, though.) jail_JAILNAME_rootdir The directory holding the jail files (the directory used as a mount point for file-based jails). Defaults to the jail name inside "$ezjail_jaildir". jail_JAILNAME_exec_start The command to run inside the jail when starting it. Defaults to "$ezjail_exec_start" or "/bin/sh /etc/rc". jail_JAILNAME_exec_stop The command to run inside the jail when stopping it. Defaults to the empty string, which means "/bin/sh /etc/rc.shutdown". jail_JAILNAME_mount_enable A boolean ("YES" or "NO"), that specifies whether the filesys- tems in /etc/fstab. JAILNAME are carried out. Set by ezjail to "YES", set to at your own risk. jail_JAILNAME_devfs_enable A boolean specifying whether to mount a /dev filesystem inside the jail. Defaults to "$ezjail_devfs_enable", or "YES". jail_JAILNAME_devfs_ruleset The ruleset to apply when mounting a /dev filesystem inside a jail. Defaults to "$ezjail_devfs_ruleset", or "devfsrules_jail". ezjail_JAILNAME_procfs A boolean specifying whether to mount a /proc filesystem inside the jail. Defaults to "$ezjail_procfs_enable", or "YES". ezjail_JAILNAME_fdescfs A boolean specifying whether to mount a /dev/fs filesystem in- side the jail. Defaults to "$ezjail_fdescfs_enable", or "YES". ezjail_JAILNAME_image The path to the image file backing the jail, if the jail is file-based; or the empty string. ezjail_JAILNAME_imagetype The type of the image, if the jail is file-based; the empty string otherwise. ezjail_JAILNAME_attachparams The parameters to pass to the tool used to decrypt file-based, encrypted jails. Initialized from the -C option when creating such a jail, or the empty string. "YES" if the jail requires interaction with the administrator when starting (typically, encrypted jails that needs a password to be decrypted). ezjail_JAILNAME_forceblocking If "YES", start the jail even when it is marked as blocking. ezjail_JAILNAME_zfs_datasets For ZFS jails, additional ZFS datasets to attach to the jail when starting it. Taken from the -z option when configuring a jail; the empty string otherwise. ezjail_JAILNAME_cpuset The processor set to place the jail in when starting it (see cpuset(1)). Taken from the -c option when configuring a jail; the empty string otherwise. ezjail_JAILNAME_fib The network view to give to the jail (see setfib(1)) when starting it. Taken from the -f option when configuring the jail; the empty string otherwise. ezjail_JAILNAME_parameters The parameter set to be configured to the jail (see jail(8)) when starting it. You need to configure this by hand. ezjail_JAILNAME_post_start_script The path to a script that will be executed after the jail suc- cessfully was created. The script receives two parameters, the jid and the jail name. You need to configure this by hand. In addition to these sh(1)-style variables, the administrator may add comment lines starting with "PROVIDE:", "REQUIRE:" and "BEFORE:". These comments are used by rcorder(8) to determine the order in which the jails are started. The default is to keep "REQUIRE" and "BEFORE" empty, meaning the jails are started in no particular order. Flavours When a jail is created, it is not configured; in particular you likely want to edit files such as /etc/resolv.conf, /etc/localtime and others. You may also want to create some system users, maybe enable sshd(8). Ezjail solves this problem by using the concept of "flavours". When a flavour is selected at jail creation time, the flavour directory tree is merged into the new jail's directory tree. In addition, the jail is configured so that on its first boot, the file ezjail.flavour is exe- cuted. As part of the install sub-command, the flavour base directory was cre- ated as /usr/jails/flavours and populated with an single flavour named example. This flavour contains 3 files customized for running in a jail (etc/make.conf, etc/periodic.conf, etc/rc.conf). The example ezjail.flavour also show how to create users, and introduce the conven- tion of placing packages in /pkg that are installed when the jail is first brought up. You are encouraged to copy the example flavour to create your own flavour. Typical flavour usages include setting up jails with site-specific configuration, creating classes of jails for development or testing (such as a webdev flavour that would install Apache with your favourite web development framework), pre-creating lo- cal users, and so on. Updating the Base Jail We already mentioned how easy it is to update jails, since only one copy needs to be updated. Ezjail only handles updating the base system; updating the ports is left to the administrator (but see "ports-mgmt/jailaudit" for a way to get notified of ports in need of an update). Updates are handled with the update command. It is possible to update the base jail from source or from binary packages. If a base jail already exists, the update command installs the world in a tempo- rary directory before moving it to the basejail, thus leaving intact all installed libraries. After making sure all software running in the jails is linked with the new libraries, you may want to remove the old library versions. It is often a good idea to update the jails when a new kernel is installed in the host, using the same sources. Starting Jails Like all rc(8) scripts, the ezjail script /usr/local/etc/rc.d/ezjail accepts parameters start, restart and stop, running, restarting and stopping all (non-blocking) jails under ezjail's control by default. When passed an additional list of jails, only these jails are acted upon. The order in which jails are started is determined by the rcorder(8) tool, using cues from the jail configurations in ezjails /usr/local/etc/ezjail control directory. The script examines its config, attaches and mounts images, and sets variables for each jail in the list before passing its command on to the /etc/rc.d/jail script. To interactively start all crypto image jails (or those depending on them), that were not automatically started during booting, use the startcrypto parameter. Note that jails configured to be in the norun state (using config -r norun jailname) are never started by the ezjail rc script. As a convenient shortcut, the command invokes the rc.d script and passes the corresponding parameters, if they look like valid parame- ters. Even if ezjail is not enabled in the rc.conf(5), rc.d/ezjail can be used to start and stop jails by prepending force or one to the start, restart or stop parameter. Refer to rc(8) for details. Snapshots and retention policies Jails residing in their own zfs and their corresponding zfs data sets can be automatically snapshot by the ezjail-admin snapshot subcommand. Taking snapshots of all jails before a major update is considered best practise. However, when taking snapshots regularly, the amount of disc space used can be considerable. Therefore ezjail allows you to set retention policies that describe how many of your snapshots you want to keep for one or all jails or a par- ticular zfs. See the description of the snapshot command in ezjail-admin(5) for details. A retention policy consists of one or multiple windows for which ezjail guarantees to keep at least one and at most two snapshots. A simple ex- ample: $ezjail_default_retention_policy="1d 2w 1y" will ensure ONE snapshot for the last day, for the last two weeks be- fore that day and then for one snapshot in the year before the two-week window. Valid multipliers are (m)inutes, (h)ours, (d)ays, (w)eeks and (y)ears. Windows can be repeated by prepending them with a number and the letter x: $ezjail_test_com_retention_policy="24x1h 6x1d 3x1w 11x4w KEEP" will set the retention policy for jail test.com to keep hourly snap- shots for one day, then daily snapshots for the rest of the week, weekly snapshots for the rest of the month, monthly snapshots for the rest of the year. The magic keyword KEEP at the end of the list will make ezjail not delete snapshots older than the oldest window. It is your responsibil- ity to keep the list in an order that makes keeping snapshots possible, i.e. not placing one-hour-windows after one-year-windows. Remarks & Tips Jails can be either accessed from the network, for instance by using ssh(1), or from the host system by using the console command, which gives you an interactive shell inside the jail. It is also possible to edit the files of a running jail, and the modifications will appear im- mediately inside the jail environment. When dealing image-based, the config -i attach command allows one to access the disk of a file-based jail without starting it. Raw sockets are disallowed by default for all jails. This is not a ez- jail restriction, but a design default of the jail command. This means the ping(8) command will get "Operation not permitted." error when used from inside of a jail. There are sysctl(3) knobs for allowing a jail to access raw sockets, see the jail(8) man page for details. Once your jail has network access, then all your normal application in- stall functions are available, right from the jails console. In partic- ular, if the ports collection was installed, it can be used as if from the host system. A modified make.conf file is installed by the example flavour, that enable the ports collection to work even with a read-only /usr/ports. It is possible to change the IP address of a jail by editing its con- figuration file in /usr/local/etc/ezjail and restarting the jail. The jails use the same network stack as the host system. In particular, that means that if a firewall is needed, it must be configured in the host system. The ezjail system (and the jails it controls) depends on the "$ezjail_enable" variable being set to "YES" in rc.conf. It is possi- ble to set this variable to "NO" if the administrator wants to tem- porarily disable ezjail, or if she doesn't want the jails to be auto- matically started on boot. The ezjail system may be reset to a pristine state by removing all its files, that is: /usr/jails/ /usr/local/etc/ezjail/ /usr/local/etc/ezjail.conf /etc/fstab.* (but check the list of files this matches) EXAMPLES The examples below are only that, examples. The reader is encouraged to read the ezjail-admin(8) man page for definitive documentation of all the options. Initial Binary Installation The ezjail system may be bootstrapped either from binary packages, or by building from source. The install command allow to bootstrap from binary packages, while the update deals with installations (and up- dates) from source. install (without any options) Fetch and install binaries for populating the base jail from the FreeBSD FTP server. If the host is not running a -RELEASE version, you will be asked for the release to install. Neither the man pages nor the source nor the ports tree are installed. Note that the FreeBSD FTP server is sometimes so busy the down- load times out. Use the -h host option to specify a less loaded server, or the "$ezjail_ftphost" option in ezjail.conf(8). install -ms Same behavior as above, except that man pages and sources are installed in the base jail. install -p Same as the first example, but use portsnap(8) to fetch and ex- tract a full FreeBSD ports tree from portsnap.FreeBSD.org into the base jail. This is necessary if you plan to install ports at later time into service jails. install -P (note uppercase P) Only fetch the current version of the ports tree, adding it to the base jail. This allow to either add the ports tree after the initial installation or update the ports tree in the base jail. Install from a disk image Mount and use a downloaded disc1.iso CDRom image file. mdconfig -a -f /usr/8.0-RELEASE-i386-disc1.iso md0 mount -v -t cd9660 /dev/md0 /mnt cd /mnt/8.0-RELEASE ezjail-admin install -h file:// -sm When the installation finishes, use the following to release the disc1.iso md0 file. cd /usr umount /mnt mdconfig -d -u md0 Install from a local directory To fetch the RELEASE base files manually, create a .netrc file in your home directory and populate it with this. machine ftp2.jp.FreeBSD.org login anonymous password FBSD@home.com macdef init prompt off cd /pub/FreeBSD/releases/i386/8.0-RELEASE epsv4 off $ getdir base kernels manpages src quit macdef getdir ! mkdir $i mreget $i/* Then issue this command on the command line. If the FTP down- load times out re-issue the FTP command again to resume where it left off. mkdir /usr/8.0-RELEASE cd /usr/8.0-RELEASE ftp -v ftp2.jp.FreeBSD.org ezjail-admin install -h file:// -sm Use this option to target the 8.0-RELEASE files you FTP'ed as the source of the running binaries used to populate the base jail. In addition the man pages and sources will be installed into the base jail. From Source Installation and Update The update is used to both install or update from source the base jail, and for updating the base jail from binary packages. update -b Build and install a world from source. The sources are taken from /usr/src (but see the -s flag). This can be used both for creating the initial base jail, and for updating it after the host has been upgraded. update -u Update the base jail to the next release using freebsd-update(8) (i.e. using binary packages). This may be used only to update an existing installation. update -U -s 8.0-RELEASE Upgrade the base jail to the host system's release using freebsd-update(8). This may be used only to upgrade an existing installation. Tell freebsd-update which OS version to expect in the basejail via the -s option. Note: Check uname(1) and especially the UNAME_r environment variable to upgrade to different versions. Jail Creation Examples create www.example.com 10.0.10.1 Create a new jail. The jail files will reside in directory www_example_com in /usr/jails, unless the variable "$ezjail_jaildir" has been set to some other value. The jail will only be allowed to use the given IP address. A warning will be displayed if this IP address is not already configured in the host, or if some network daemon is already listening on this address. The name of the jail which will appear in the list command or which will need to be given to the console com- mand is www.example.com. create -f example -r webserver www.example.com 10.0.10.2,2001:db8:1:9243::80 Create a new jail, placing it in directory webserver instead of deriving the directory name of the jail from its host name. The jail will be created with the flavour example. This jail will be given two IP addresses; this is possible only since FreeBSD 7.2. create -i -s 600M sandbox2 10.0.10.4 This creates a new file-based jail having a file size of 600 megabytes in /usr/jails/sandbox2.img. An empty directory, /usr/jails/sandbox2, will be created, and used as a mount point when starting the jail. create -c bde -s 600M sandbox3 10.0.10.5 This creates a new file based image jail, with gbde(4) encryp- tion. During the gbde creation process you are asked to enter a passphrase that is used as the prime seed value of the encryp- tion process. Remember this passphrase, you will be asked for the passphrase every time you want to start this jail. As they require administrator interaction, jails backed by an encrypted file are not automatically started when the system boots. create -c zfs -s 1G sandbox4 em1\|10.0.10.6 This creates a new zfs filesystem based jail with a default quota of 1 gigabyte using lzjb compression. It uses the parent ZFS filesystem configured in the "$ezjail_jailzfs" variable to create the filesystem in. The jail command will add the ip ad- dress 10.0.10.6 as an alias on the device em1 before starting the jail. FILES /usr/local/bin/ezjail-admin /usr/local/etc/rc.d/ezjail /usr/local/etc/ezjail.conf /usr/local/share/examples/ezjail/ /usr/local/etc/ezjail/* /usr/etc/fstab.* SEE ALSO ezjail-admin(8), ezjail.conf(5), jail(8), nullfs(4), zfs(8). Interesting additional tools include: "ports-mgmt/jailaudit". AUTHOR Dirk Engling <erdgeist@erdgeist.org>. The man page is based on a draft by JoeB <joeb1@a1poweruser.com> and was rewritten by Frederic Perrin <frederic.perrin@resel.fr>. FreeBSD 14.3 December 5, 2013 EZJAIL(7)
NAME | SYNOPSIS | OVERVIEW | DESCRIPTION | EZJAIL SYSTEM | WHAT'S IN A JAIL | EXAMPLES | FILES | SEE ALSO | AUTHOR
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ezjail&sektion=7&manpath=FreeBSD+14.3-RELEASE+and+Ports>