FreeBSD Manual Pages
NG_BTSOCKET(4) Kernel Interfaces Manual NG_BTSOCKET(4) NAME ng_btsocket -- Bluetooth sockets layer SYNOPSIS #include <sys/types.h> #include <sys/socket.h> #include <sys/bitstring.h> #include <netgraph/bluetooth/include/ng_hci.h> #include <netgraph/bluetooth/include/ng_l2cap.h> #include <netgraph/bluetooth/include/ng_btsocket.h> DESCRIPTION The ng_btsocket module implements three Netgraph node types. Each type in its turn implements one protocol within PF_BLUETOOTH domain. BLUETOOTH_PROTO_HCI protocol SOCK_RAW HCI sockets Implemented by btsock_hci_raw Netgraph type. Raw HCI sockets allow sending of raw HCI command datagrams only to correspondents named in send(2) calls. Raw HCI datagrams (HCI commands, events and data) are generally received with recvfrom(2), which returns the next datagram with its return address. Raw HCI sockets can also be used to control HCI nodes. The Bluetooth raw HCI socket address is defined as follows: /* Bluetooth version of struct sockaddr for raw HCI sockets */ struct sockaddr_hci { u_char hci_len; /* total length */ u_char hci_family; /* address family */ char hci_node[32]; /* address (size == NG_NODESIZ ) */ }; Raw HCI sockets support a number of ioctl(2) requests such as: SIOC_HCI_RAW_NODE_GET_STATE Returns current state for the HCI node. SIOC_HCI_RAW_NODE_INIT Turn on "inited" bit for the HCI node. SIOC_HCI_RAW_NODE_GET_DEBUG Returns current debug level for the HCI node. SIOC_HCI_RAW_NODE_SET_DEBUG Sets current debug level for the HCI node. SIOC_HCI_RAW_NODE_GET_BUFFER Returns current state of data buffers for the HCI node. SIOC_HCI_RAW_NODE_GET_BDADDR Returns BD_ADDR for the HCI node. SIOC_HCI_RAW_NODE_GET_FEATURES Returns the list of features supported by hardware for the HCI node. SIOC_HCI_RAW_NODE_GET_STAT Returns various statistic counters for the HCI node. SIOC_HCI_RAW_NODE_RESET_STAT Resets all statistic counters for the HCI node to zero. SIOC_HCI_RAW_NODE_FLUSH_NEIGHBOR_CACHE Remove all neighbor cache entries for the HCI node. SIOC_HCI_RAW_NODE_GET_NEIGHBOR_CACHE Returns content of the neighbor cache for the HCI node. SIOC_HCI_RAW_NODE_GET_CON_LIST Returns list of active baseband connections (i.e., ACL and SCO links) for the HCI node. SIOC_HCI_RAW_NODE_GET_LINK_POLICY_MASK Returns current link policy settings mask for the HCI node. SIOC_HCI_RAW_NODE_SET_LINK_POLICY_MASK Sets current link policy settings mask for the HCI node. SIOC_HCI_RAW_NODE_GET_PACKET_MASK Returns current packet mask for the HCI node. SIOC_HCI_RAW_NODE_SET_PACKET_MASK Sets current packet mask for the HCI node. SIOC_HCI_RAW_NODE_GET_ROLE_SWITCH Returns current value of the role switch parameter for the HCI node. SIOC_HCI_RAW_NODE_SET_ROLE_SWITCH Sets new value of the role switch parameter for the HCI node. The net.bluetooth.hci.sockets.raw.ioctl_timeout variable, that can be examined and set via sysctl(8), controls the control request timeout (in seconds) for raw HCI sockets. Raw HCI sockets support filters. The application can filter certain HCI datagram types. For HCI event datagrams the application can set additional filter. The raw HCI socket filter defined as follows: /* * Raw HCI socket filter. * * For packet mask use (1 << (HCI packet indicator - 1)) * For event mask use (1 << (Event - 1)) */ struct ng_btsocket_hci_raw_filter { bitstr_t bit_decl(packet_mask, 32); bitstr_t bit_decl(event_mask, (NG_HCI_EVENT_MASK_SIZE * 8)); }; The SO_HCI_RAW_FILTER option defined at SOL_HCI_RAW level can be used to obtain via getsockopt(2) or change via setsockopt(2) raw HCI socket's filter. BLUETOOTH_PROTO_L2CAP protocol The Bluetooth L2CAP socket address is defined as follows: /* Bluetooth version of struct sockaddr for L2CAP sockets */ struct sockaddr_l2cap { u_char l2cap_len; /* total length */ u_char l2cap_family; /* address family */ uint16_t l2cap_psm; /* Protocol/Service Multiplexor */ bdaddr_t l2cap_bdaddr; /* address */ }; SOCK_RAW L2CAP sockets Implemented by btsock_l2c_raw Netgraph type. Raw L2CAP sockets do not provide access to raw L2CAP datagrams. These sockets used to control L2CAP nodes and to issue special L2CAP requests such as ECHO_REQUEST and GET_INFO request. Raw L2CAP sockets support number of ioctl(2) requests such as: SIOC_L2CAP_NODE_GET_FLAGS Returns current state for the L2CAP node. SIOC_L2CAP_NODE_GET_DEBUG Returns current debug level for the L2CAP node. SIOC_L2CAP_NODE_SET_DEBUG Sets current debug level for the L2CAP node. SIOC_L2CAP_NODE_GET_CON_LIST Returns list of active baseband connections (i.e., ACL links) for the L2CAP node. SIOC_L2CAP_NODE_GET_CHAN_LIST Returns list of active channels for the L2CAP node. SIOC_L2CAP_NODE_GET_AUTO_DISCON_TIMO Returns current value of the auto disconnect timeout for the L2CAP node. SIOC_L2CAP_NODE_SET_AUTO_DISCON_TIMO Sets current value of the auto disconnect timeout for the L2CAP node. SIOC_L2CAP_L2CA_PING Issues L2CAP ECHO_REQUEST. SIOC_L2CAP_L2CA_GET_INFO Issues L2CAP GET_INFO request. The net.bluetooth.l2cap.sockets.raw.ioctl_timeout variable, that can be examined and set via sysctl(8), controls the control request timeout (in seconds) for raw L2CAP sockets. SOCK_SEQPACKET L2CAP sockets Implemented by btsock_l2c Netgraph type. L2CAP sockets are either "active" or "passive". Active sockets initiate connections to passive sockets. By default, L2CAP sockets are created active; to create a passive socket, the listen(2) system call must be used after binding the socket with the bind(2) system call. Only passive sockets may use the accept(2) call to accept incoming connections. Only active sockets may use the connect(2) call to initiate connections. L2CAP sockets support "wildcard addressing". In this case, socket must be bound to NG_HCI_BDADDR_ANY address. Note that PSM (Protocol/Service Multiplexor) field is always required. Once a connection has been es- tablished, the socket's address is fixed by the peer entity's location. The address assigned to the socket is the address associated with the Bluetooth device through which packets are being transmitted and re- ceived, and PSM (Protocol/Service Multiplexor). L2CAP sockets support number of options defined at SOL_L2CAP level which can be set with setsockopt(2) and tested with getsockopt(2): SO_L2CAP_IMTU Get (set) maximum payload size the local socket is capable of ac- cepting. SO_L2CAP_OMTU Get maximum payload size the remote socket is capable of accept- ing. SO_L2CAP_IFLOW Get incoming flow specification for the socket. Not implemented. SO_L2CAP_OFLOW Get (set) outgoing flow specification for the socket. Not imple- mented. SO_L2CAP_FLUSH Get (set) value of the flush timeout. Not implemented. BLUETOOTH_PROTO_RFCOMM protocol The Bluetooth RFCOMM socket address is defined as follows: /* Bluetooth version of struct sockaddr for RFCOMM sockets */ struct sockaddr_rfcomm { u_char rfcomm_len; /* total length */ u_char rfcomm_family; /* address family */ bdaddr_t rfcomm_bdaddr; /* address */ uint8_t rfcomm_channel; /* channel */ }; SOCK_STREAM RFCOMM sockets Note that RFCOMM sockets do not have associated Netgraph node type. RFCOMM sockets are implemented as additional layer on top of L2CAP sockets. RFCOMM sockets are either "active" or "passive". Active sockets initiate connections to passive sockets. By default, RFCOMM sockets are created active; to create a passive socket, the listen(2) system call must be used after binding the socket with the bind(2) sys- tem call. Only passive sockets may use the accept(2) call to accept incoming connections. Only active sockets may use the connect(2) call to initiate connections. RFCOMM sockets support "wildcard addressing". In this case, socket must be bound to NG_HCI_BDADDR_ANY address. Note that RFCOMM channel field is always required. Once a connection has been established, the socket's address is fixed by the peer entity's location. The address assigned to the socket is the address associated with the Bluetooth de- vice through which packets are being transmitted and received, and RF- COMM channel. The following options, which can be tested with getsockopt(2) call, are defined at SOL_RFCOMM level for RFCOMM sockets: SO_RFCOMM_MTU Returns the maximum transfer unit size (in bytes) for the underly- ing RFCOMM channel. Note that application still can write/read bigger chunks to/from the socket. SO_RFCOMM_FC_INFO Return the flow control information for the underlying RFCOMM channel. The net.bluetooth.rfcomm.sockets.stream.timeout variable, that can be examined and set via sysctl(8), controls the connection timeout (in seconds) for RFCOMM sockets. HOOKS These node types support hooks with arbitrary names (as long as they are unique) and always accept hook connection requests. NETGRAPH CONTROL MESSAGES These node types support the generic control messages. SHUTDOWN These nodes are persistent and cannot be shut down. SEE ALSO btsockstat(1), socket(2), netgraph(4), ng_bluetooth(4), ng_hci(4), ng_l2cap(4), ngctl(8), sysctl(8) HISTORY The ng_btsocket module was implemented in FreeBSD 5.0. AUTHORS Maksim Yevmenkin <m_evmenkin@yahoo.com> BUGS Most likely. Please report if found. FreeBSD 14.3 November 13, 2012 NG_BTSOCKET(4)
NAME | SYNOPSIS | DESCRIPTION | HOOKS | NETGRAPH CONTROL MESSAGES | SHUTDOWN | SEE ALSO | HISTORY | AUTHORS | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=ng_btsocket&manpath=FreeBSD+14.3-RELEASE+and+Ports>