FreeBSD Manual Pages
scanimage(1) SANE Scanner Access Now Easy scanimage(1) NAME scanimage - scan an image SYNOPSIS scanimage [-d dev] [--format=output-format] [-i profile] [-L] [-f de- vice-format] [-b [format]] [--batch-start=start] [--batch-count=count] [--batch-increment=increment] [--batch-double] [--accept-md5-only] [-p] [-o path] [-n] [-T] [-A] [-h] [-v] [-B size] [-V] [device-specific-op- tions] DESCRIPTION scanimage is a command-line interface to control image acquisition de- vices such as flatbed scanners or cameras. The device is controlled via command-line options. After command-line processing, scanimage normally proceeds to acquire an image. The image data is written to standard output in one of the PNM (portable aNyMaP) formats (PBM for black-and-white images, PGM for grayscale images, and PPM for color im- ages), TIFF format (black-and-white, grayscale or color), PNG format, or JPEG format (compression level 75). scanimage accesses image acqui- sition devices through the SANE (Scanner Access Now Easy) interface and can thus support any device for which there exists a SANE backend (try apropos sane- to get a list of available backends). EXAMPLES To get a list of devices: scanimage -L To scan with default settings to the file image.pnm: scanimage >image.pnm To scan 100x100 mm to the file image.tiff (-x and -y may not be avail- able with all devices): scanimage -x 100 -y 100 --format=tiff >image.tiff To print all available options: scanimage -h OPTIONS There are two sets of options available when running scanimage. The options that are provided by scanimage itself are listed below. In addition, each backend offers its own set of options and these can also be specified. Note that the options available from the backend may vary depending on the scanning device that is selected. Often options that are similar in function may be implemented differ- ently across backends. An example of this difference is --mode Gray and --mode Grayscale. This may be due to differing backend author prefer- ences. At other times, options are defined by the scanning device it- self and therefore out of the control of the backend code. Parameters are separated by a blank from single-character options (e.g. -d epson) and by a "=" from multi-character options (e.g. --de- vice-name=epson). -d dev, --device-name=dev specifies the device to access and must be followed by a SANE device-name like `epson:/dev/sg0' or `hp:/dev/usbscanner0'. A (partial) list of available devices can be obtained with the --list-devices option (see below). If no device-name is speci- fied explicitly, scanimage reads a device-name from the environ- ment variable SANE_DEFAULT_DEVICE. If this variable is not set, scanimage will attempt to open the first available device. --format=output-format selects how image data is written to standard output or the file specified by the --output-file option. output-format can be pnm, tiff, png, or jpeg. If --format is not specified, PNM is written by default. -i profile, --icc-profile=profile is used to include an ICC profile into a TIFF file. -L, --list-devices requests a (partial) list of devices that are available. The list may not be complete since some devices may be available, but are not listed in any of the configuration files (which are typically stored in directory /usr/local/etc/sane.d). This is particularly the case when accessing scanners through the net- work. If a device is not listed in a configuration file, the only way to access it is by its full device name. You may need to consult your system administrator to find out the names of such devices. -f format, --formatted-device-list=device-format works similarly to --list-devices, but requires a format string. scanimage replaces the placeholders %d %v %m %t %i %n with the device name, vendor name, model name, scanner type, an index number and newline respectively. The command scanimage -f " scanner number %i device %d is a %t, model %m, produced by %v " will produce something like: scanner number 0 device sharp:/dev/sg1 is a flatbed scanner, model JX250 SCSI, produced by SHARP The --batch* options provide features for scanning documents using doc- ument feeders. -b [format], --batch=[format] is used to specify the format of the filename that each page will be written to. Each page is written out to a single file. If format is not specified, the default of out%d.pnm (or out%d.tif for --format tiff, out%d.png for --format png or out%d.jpg for --format jpeg) will be used. This option is incompatible with the --output-path option. format is given as a printf style string with one integer parameter. --batch-start=start selects the page number to start naming files with. If this option is not given, the counter will start at 1. --batch-count=count specifies the number of pages to attempt to scan. If not given, scanimage will continue scanning until the scanner returns a state other than OK. Not all scanners with document feeders signal when the ADF is empty. Use this option to work around them. --batch-increment=increment sets the amount that the number in the filename is incre- mented by. Generally this is used when you are scanning double-sided documents on a single-sided document feeder. --batch-double is a specific command provided to aid this. --batch-double will automatically set the increment to 2. Equivalent to --batch-increment=2. --batch-prompt will ask for pressing RETURN before scanning a page. This can be used for scanning multiple pages without an auto- matic document feeder. --accept-md5-only only accepts user authorization requests that support MD5 secu- rity. The SANE network daemon saned(8) is capable of doing such requests. -p, --progress requests that scanimage prints a progress counter. It shows how much image data of the current image has already been received (in percent). -o path, --output-file=path requests that scanimage saves the scanning output to the given path. This option is incompatible with the --batch option. The program will try to guess --format from the file name. If that is not possible, it will print an error message and exit. -n, --dont-scan requests that scanimage only sets the options provided by the user but doesn't actually perform a scan. This option can be used to e.g. turn off the scanner's lamp (if supported by the backend). -T, --test requests that scanimage performs a few simple sanity tests to make sure the backend works as defined by the SANE API. In par- ticular the sane_read() function is exercised by this test. -A, --all-options requests that scanimage lists all available options exposed by the backend, including button options. The information is printed on standard output and no scan will be performed. -h, --help requests help information. The information is printed on stan- dard output and no scan will be performed. -v, --verbose increases the verbosity of the output of scanimage. The option may be specified repeatedly, each time increasing the verbosity level. -B [size], --buffer-size=size changes input buffer size from the default of 1MB to size KB. -V, --version requests that scanimage prints the program and package name, the version number of the SANE distribution that it came with and the version of the backend that it loads. If more information about the version numbers of the backends are necessary, the DE- BUG variable for the dll layer can be used. Example: SANE_DE- BUG_DLL=3 scanimage -L. As you might imagine, much of the power of scanimage comes from the fact that it can control any SANE backend. Thus, the exact set of com- mand-line options depends on the capabilities of the selected device. To see the options for a device named dev, invoke scanimage via a com- mand-line of the form: scanimage --help --device-name dev The documentation for the device-specific options printed by --help is best explained with a few examples: -l 0..218mm [0] Top-left x position of scan area. The description above shows that option -l expects an option value in the range from 0 to 218 mm. The value in square brack- ets indicates that the current option value is 0 mm. Most back- ends provide similar geometry options for top-left y position (-t), width (-x) and height of scan-area (-y). --brightness -100..100% [0] Controls the brightness of the acquired image. The description above shows that option --brightness expects an option value in the range from -100 to 100 percent. The value in square brackets indicates that the current option value is 0 percent. --default-enhancements Set default values for enhancement controls. The description above shows that option --default-enhancements has no option value. It should be thought of as having an imme- diate effect at the point of the command-line at which it ap- pears. For example, since this option resets the --brightness option, the option-pair --brightness 50 --default-enhancements would effectively be a no-op. --mode Lineart|Gray|Color [Gray] Selects the scan mode (e.g., lineart or color). The description above shows that option --mode accepts an argu- ment that must be one of the strings Lineart, Gray, or Color. The value in the square bracket indicates that the option is currently set to Gray. For convenience, it is legal to abbrevi- ate the string values as long as they remain unique. Also, the case of the spelling doesn't matter. For example, option set- ting --mode col is identical to --mode Color. --custom-gamma[=(yes|no)] [inactive] Determines whether a builtin or a custom gamma-table should be used. The description above shows that option --custom-gamma expects either no option value, a "yes" string, or a "no" string. Spec- ifying the option with no value is equivalent to specifying "yes". The value in square-brackets indicates that the option is not currently active. That is, attempting to set the option would result in an error message. The set of available options typically depends on the settings of other options. For exam- ple, the --custom-gamma table might be active only when a grayscale or color scan-mode has been requested. Note that the --help option is processed only after all other options have been processed. This makes it possible to see the option settings for a particular mode by specifying the appro- priate mode-options along with the --help option. For example, the command-line: scanimage --help --mode color would print the option settings that are in effect when the color-mode is selected. --gamma-table 0..255,... Gamma-correction table. In color mode this option equally af- fects the red, green, and blue channels simultaneously (i.e., it is an intensity gamma table). The description above shows that option --gamma-table expects zero or more values in the range 0 to 255. For example, a legal value for this option would be "3,4,5,6,7,8,9,10,11,12". Since it's cumbersome to specify long vectors in this form, the same can be expressed by the abbreviated form "[0]3-[9]12". What this means is that the first vector element is set to 3, the 9-th element is set to 12 and the values in between are interpo- lated linearly. Of course, it is possible to specify multiple such linear segments. For example, "[0]3-[2]3-[6]7,[7]10-[9]6" is equivalent to "3,3,3,4,5,6,7,10,8,6". The program gamma4scanimage can be used to generate such gamma tables (see gamma4scanimage(1) for details). --filename <string> [/tmp/input.ppm] The filename of the image to be loaded. The description above is an example of an option that takes an arbitrary string value (which happens to be a filename). Again, the value in brackets show that the option is current set to the filename /tmp/input.ppm. ENVIRONMENT SANE_DEFAULT_DEVICE The default device-name. FILES /usr/local/etc/sane.d This directory holds various configuration files. For details, please refer to the manual pages listed below. ~/.sane/pass This file contains lines of the form user:password:resource scanimage uses this information to answer user authorization re- quests automatically. The file must have 0600 permissions or stricter. You should use this file in conjunction with the --ac- cept-md5-only option to avoid server-side attacks. The resource may contain any character but is limited to 127 characters. SEE ALSO sane(7), gamma4scanimage(1), xscanimage(1), xcam(1), xsane(1), scanadf(1), sane-dll(5), sane-net(5), sane-"backendname"(5) AUTHOR David Mosberger, Andreas Beck, Gordon Matzigkeit, Caskey Dickson, and many others. For questions and comments contact the sane-devel mail- inglist (see http://www.sane-project.org/mailing-lists.html). BUGS For vector options, the help output currently has no indication as to how many elements a vector-value should have. 10 Jul 2008 scanimage(1)
NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | OPTIONS | ENVIRONMENT | FILES | SEE ALSO | AUTHOR | BUGS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=scanimage&sektion=1&manpath=FreeBSD+14.3-RELEASE+and+Ports>