Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
TWA(4)			    Kernel Interfaces Manual			TWA(4)

NAME
       twa -- 3ware 9000/9500/9550/9650	series SATA RAID controllers driver

DEPRECATION NOTICE
       The twa driver is not present in	FreeBSD	14.0.

SYNOPSIS
       To  compile  this  driver into the kernel, place	the following lines in
       your kernel configuration file:

	     device scbus
	     device twa

       Alternatively, to load the driver as a module at	boot time,  place  the
       following line in loader.conf(5):

	     twa_load="YES"

DESCRIPTION
       The  twa	 driver	 provides support for AMCC's 3ware 9000/9500/9550/9650
       series SATA controllers.

       These controllers are available in 4, 8,	12 or 16-port  configurations,
       and  support  the  following  RAID levels: 0, 1,	10, 5, 50.  The	device
       nodes for the controllers are of	the form /dev/twaX,  where  X  is  the
       controller  number.  The	driver is implemented as a SCSI	SIM under CAM,
       and, as such, the logical units that it controls	are accessible via the
       device nodes, /dev/daY, where Y is the logical unit number.

HARDWARE
       The twa driver supports the following SATA RAID controllers:

          AMCC's 3ware	9500S-4LP
          AMCC's 3ware	9500S-8
          AMCC's 3ware	9500S-8MI
          AMCC's 3ware	9500S-12
          AMCC's 3ware	9500S-12MI
          AMCC's 3ware	9500SX-4LP
          AMCC's 3ware	9500SX-8LP
          AMCC's 3ware	9500SX-12
          AMCC's 3ware	9500SX-12MI
          AMCC's 3ware	9500SX-16ML
          AMCC's 3ware	9550SX-4LP
          AMCC's 3ware	9550SX-8LP
          AMCC's 3ware	9550SX-12
          AMCC's 3ware	9550SX-12MI
          AMCC's 3ware	9550SX-16ML
          AMCC's 3ware	9650SE-2LP
          AMCC's 3ware	9650SE-4LPML
          AMCC's 3ware	9650SE-8LPML
          AMCC's 3ware	9650SE-12ML
          AMCC's 3ware	9650SE-16ML
          AMCC's 3ware	9650SE-24M8

DIAGNOSTICS
       Whenever	the driver encounters a	command	failure, it prints out an  er-
       ror  code in the	format:	"ERROR:	(<error	source>: <error	code>):", fol-
       lowed by	a text description of the error.  There	are other  error  mes-
       sages  and  warnings that the driver prints out,	depending on the kinds
       of errors that it encounters.  If the driver is compiled	with TWA_DEBUG
       defined,	it prints out a	whole bunch of debug messages, the quantity of
       which varies depending on the value assigned to TWA_DEBUG (0 to 10).

AUTHORS
       The  twa	 driver	 and   manpage	 were	written	  by   Vinod   Kashyap
       <vkashyap@FreeBSD.org>.

FreeBSD	14.3			  May 9, 2007				TWA(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=twa&sektion=4&manpath=FreeBSD+14.3-RELEASE+and+Ports>

home | help