FreeBSD Manual Pages
DTSEC(4) powerpc Kernel Interfaces Manual DTSEC(4) NAME dtsec -- Freescale Datapath Acceleration Architecture-based Three-Speed Ethernet Controller device driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: include "dpaa/config.dpaa" device dpaa device miibus DESCRIPTION The dtsec driver provides support for the DPAA-based gigabit Ethernet controller integrated in some of the Freescale system-on-chip devices. The dtsec driver supports the following media types: autoselect Enable autoselection of the media type and op- tions 10baseT/UTP Set 10Mbps operation 100baseTX Set 100Mbps operation 1000baseT Set 1000baseT operation The dtsec driver supports the following media options: full-duplex Set full duplex operation The dtsec driver supports two operating modes: Regular Normal mode, utilizing the full datapath acceler- ation, Buffer Manager, and Queue Manager. Independent Runs disconnected from the Buffer Manager and Queue Manager. HARDWARE Gigabit Ethernet controllers built into the following Freescale system- on-chip devices are known to work with the dtsec driver: • P2041, P3041 • P5010, P5020 Additionally, the following devices are expected to work, but are untested: • P4080, P4040 • P5040 SEE ALSO altq(4), arp(4), miibus(4), netintro(4), ng_ether(4), ifconfig(8) HISTORY The dtsec device driver first appeared in FreeBSD 11.0. AUTHORS The base version of dtsec device driver was written by Semihalf. This manual page was written by Justin Hibbits. FreeBSD 15.0 October 31, 2017 DTSEC(4)
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=dtsec&sektion=4&manpath=FreeBSD+15.0-RELEASE+and+Ports.quarterly>