FreeBSD Manual Pages
GPIO(3) Library Functions Manual GPIO(3) NAME gpio_open, gpio_close -- library to handle GPIO pins LIBRARY libgpio SYNOPSIS #include <sys/types.h> #include <libgpio.h> gpio_handle_t gpio_open(unsigned int unit); gpio_handle_t gpio_open_device(const char *device); void gpio_close(gpio_handle_t handle); int gpio_pin_list(gpio_handle_t handle, gpio_config_t **pcfgs); int gpio_pin_config(gpio_handle_t handle, gpio_config_t *cfg); int gpio_pin_set_name(gpio_handle_t handle, gpio_pin_t pin, char *name); int gpio_pin_set_flags(gpio_handle_t handle, gpio_config_t *cfg); gpio_value_t gpio_pin_get(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_set(gpio_handle_t handle, gpio_pin_t pin, gpio_value_t value); int gpio_pin_toggle(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_low(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_high(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_input(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_output(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_opendrain(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_pushpull(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_tristate(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_pullup(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_pulldown(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_invin(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_invout(gpio_handle_t handle, gpio_pin_t pin); int gpio_pin_pulsate(gpio_handle_t handle, gpio_pin_t pin); int gpio_configure_events(gpio_handle_t handle, uint32_t report_type, uint32_t fifo_size); int gpio_fileno(gpio_handle_t handle); DESCRIPTION The libgpio library provides an interface to configure GPIO pins. The li- brary operates with a gpio_handle_t opaque type which can be created with gpio_open() or gpio_open_device(). When no more GPIO operations are needed, this handle can be destroyed with gpio_close(). To get a list of all available pins, one can call gpio_pin_list(). This function takes a pointer to a gpio_config_t which is dynamically allocated. This pointer should be freed with free(3) when it is no longer necessary. The function gpio_pin_config() retrieves the current configuration of a pin. The pin number should be passed in via the g_pin variable which is part of the gpio_config_t structure. The function gpio_pin_set_name() sets the name used to describe a pin. The function gpio_pin_set_flags() configures a pin with the flags passed in by the gpio_config_t structure. The pin number should also be passed in through the g_pin variable. All other structure members will be ignored by this function. The list of flags can be found in <sys/gpio.h>. The get or set the state of a GPIO pin, the functions gpio_pin_get() and gpio_pin_set() are available, respectively. To toggle the state, use gpio_pin_toggle(). The functions gpio_pin_low() and gpio_pin_high() are wrappers around gpio_pin_set(). The functions gpio_pin_input(), gpio_pin_output(), gpio_pin_opendrain(), gpio_pin_pushpull(), gpio_pin_tristate(), gpio_pin_pullup(), gpio_pin_pull- down(), gpio_pin_invin(), gpio_pin_invout() and gpio_pin_pulsate() are wrappers around gpio_pin_set_flags(). The function gpio_configure_events() configures the interrupt report type and FIFO size for buffered gpio interrupts. The report type is specified by one of the following values: GPIO_EVENT_REPORT_DETAIL Events are reported using struct gpio_event_detail. GPIO_EVENT_REPORT_SUMMARY Events are reported using struct gpio_event_summary. By default, the report type is GPIO_EVENT_REPORT_DETAIL, with a default FIFO size of 2 * number of pins belonging to the gpio_device_t instance. The FIFO argument is only meaningful when report_type is GPIO_EVENT_REPORT_DETAIL. The structures associated with each report type are defined in <sys/gpio.h>. This setting is tracked on a per device in- stance basis. The FIFO size cannot be reduced below the default value, nor can it be decreased after it has been increased. If any pin on the device has already been configured for interrupts, gpio_configure_events() fails and returns -1. On success 0 is returned. The function gpio_fileno() returns the file descriptor associated with the gpio_handle_t instance. File operations have the following semantics: read(2) Read one or more gpio interrupts that have occured since the last successful read(2). The results are placed into the output buffer of the type previously established via gpio_config- ure_events(). If there are no pending interrupts, read(2) blocks until an interrupt occurs, unless O_NONBLOCK is set. poll(2) When receiving notification via poll(2) or similar interfaces, the file descriptor becomes readable when one or more gpio inter- rupts are pending. EXAMPLES The following example shows how to configure pin 16 as output and then drive it high: #include <sys/types.h> #include <err.h> #include <libgpio.h> gpio_handle_t handle; handle = gpio_open(0); if (handle == GPIO_INVALID_HANDLE) err(1, "gpio_open failed"); gpio_pin_output(handle, 16); gpio_pin_high(handle, 16); gpio_close(handle); The following example shows how to get a configuration of a pin: gpio_config_t cfg; cfg.g_pin = 32; gpio_pin_config(handle, &cfg); The structure will contain the name of the pin and its flags. SEE ALSO gpiobus(4), gpioctl(8) HISTORY The libgpio library first appeared in FreeBSD 11.0. AUTHORS The libgpio library was implemented by Rui Paulo <rpaulo@FreeBSD.org>. FreeBSD ports 15.1 September 3, 2025 GPIO(3)
NAME | LIBRARY | SYNOPSIS | DESCRIPTION | EXAMPLES | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=gpio&sektion=3&manpath=FreeBSD+15.1-RELEASE+and+Ports>