FreeBSD Manual Pages
GPIOCTL(8) System Manager's Manual GPIOCTL(8) NAME gpioctl -- GPIO control utility SYNOPSIS gpioctl [-f ctldev] -l [-v] gpioctl [-f ctldev] [-pN] -t pin gpioctl [-f ctldev] [-pN] -c pin flag [flag ...] gpioctl [-f ctldev] [-pN] -n pin pin-name gpioctl [-f ctldev] [-pN] pin [0|1] DESCRIPTION The gpioctl utility could be used to manage GPIO pins from userland and list available pins. The pin argument can either be a pin-number or a pin-name. If it is a num- ber and a pin has this number as its name and you did not use -N or -p , then gpioctl exits. The options are as follows: -c pin flag [flag ...] Configure pin by setting provided flags. The following flags are currently defined: IN Input pin OUT Output pin OD Open drain pin PP Push pull pin TS Tristate pin PU Pull-up pin PD Pull-down pin II Inverted input pin IO Inverted output pin -f ctldev GPIO controller device to use If not specified, defaults to /dev/gpioc0 -l list available pins -n pin pin-name set the name used to describe the pin -t pin toggle value of provided pin -v be verbose: for each listed pin print current configuration -p Force pin to be interpreted as a pin number -N Force pin to be interpreted as a pin name EXAMPLES * List pins available on GPIO controller defined by device /dev/gpioc0 gpioctl -f /dev/gpioc0 -l * Set the value of pin 12 to 1 gpioctl -f /dev/gpioc0 12 1 * Configure pin 12 to be input pin gpioctl -f /dev/gpioc0 -c 12 IN * Set the name of pin 12 to test gpioctl -f /dev/gpioc0 -n 12 test * Toggle the value the pin named test gpioctl -f /dev/gpioc0 -t test * Toggle the value of pin number 12 even if another pin has the name 12 gpioctl -f /dev/gpioc0 -pt 12 SEE ALSO gpio(4), gpioiic(4), gpioled(4) HISTORY The gpioctl utility appeared in FreeBSD 9.0. AUTHORS The gpioctl utility and this manual page were written by Oleksandr Tymoshenko <gonzo@freebsd.org>. FreeBSD ports 15.1 June 6, 2018 GPIOCTL(8)
NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | SEE ALSO | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=gpioctl&manpath=FreeBSD+15.1-RELEASE+and+Ports>