UPLCOM(4) Kernel Interfaces Manual UPLCOM(4) NAME uplcom -- USB support for Prolific PL-2303/2303X/2303HX serial adapters driver SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device usb device ucom device uplcom Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): uplcom_load="YES" DESCRIPTION The uplcom driver provides support for various serial adapters based on the Prolific PL-2303, PL-2303X and PL-2303HX USB-to-RS232 Bridge chips. The device is accessed through the ucom(4) driver which makes it behave like a tty(4). HARDWARE The uplcom driver supports the following devices and adapters: * ADLINK ND-6530 USB-Serial Adapter * Alcatel One Touch 535/735 Phone * Alcor AU9720 USB-RS232 Serial Adapter * AlDiga AL-11U Modem * Alltronix ACM003U00 Modem * Anchor Serial adapter * ATEN UC-232A * ATEN UC-232B * BAFO BF-800 and BF-810 * Belkin F5U257 * BenQ S81 Phone * Corega CG-USBRS232R Serial Adapter * Cressi Edy (Seiko) Diving Computer * ELECOM UC-SGT Serial Adapter * HAL Corporation Crossam2+USB IR commander * Hama USB RS-232 Serial Adapter * Hamlet exaggerate XURS232 * HP LD220 Point-Of-Sale (POS) Display * IOGEAR UC-232A * I/O DATA USB-RSAQ, USB-RSAQ2, USB-RSAQ3 and USB-RSAQ5 * iTegno WM1080A GSM/GFPRS Modem * iTegno WM2080A CDMA Modem * Leadtek 9531 GPS * Micromax 610U Modem * Microsoft Palm 700WX * Mobile Action MA-620 Infrared Adapter * Motorola Cables * Nokia CA-42 Cable * OTI DKU-5 cable * Panasonic TY-TP50P6-S flat screen * PLX CA-42 Phone Cable * PLANEX USB-RS232 URS-03 * Prolific Generic USB-Serial Adapters * Prolific Generic USB-Serial Adapters (HXN) * Prolific Pharos USB-Serial Adapter * Prolific USB-Serial Controller D * RATOC REX-USB60 * Radio Shack USB Serial Cable * Sagem USB-Serial Adapter * Samsung I330 Phone Cradle * Sandberg USB to Serial Link (model number 133-08) * Sanwa KB-USB2 Multimeter cable * Siemens/BenQ EF81, SX1, X65 and X75 Mobile Phones * Sitecom USB-Serial Adapter * SMART Technologies USB-Serial Adapter * Sony QN3 Phone Cable * Sony Ericsson Datapilot * Sony Ericsson DCU-10 and DCU-11 (Susteen) USB Cables * SOURCENEXT KeikaiDenwa 8 (with and without charger) * Speed Dragon USB-Serial Cable * Syntech CPT-8001C Barcode Scanner * TDK UHA6400 and UPA9664 USB-PHS Adapters * TRENDnet USB to Serial Converter (TU-S9) * Tripp-Lite U209-000-R USB-Serial Adapter * UIC HCR331 Magnetic Stripe Card Reader * UIC MSR206 Magnetic Stripe Card Reader * Willcom W-SIM DD PHS terminal.(WS002IN) * YC-Cable USB-Serial Adapter * Zeagle N2iTion3 Diving Computer SYSCTL VARIABLES The following variables are available as both sysctl(8) variables and loader(8) tunables: hw.usb.uplcom.debug Debug output level, where 0 is debugging disabled and larger values increase debug message verbosity. Default is 0. FILES /dev/ttyU* for callin ports /dev/ttyU*.init /dev/ttyU*.lock corresponding callin initial-state and lock-state devices /dev/cuaU* for callout ports /dev/cuaU*.init /dev/cuaU*.lock corresponding callout initial-state and lock-state devices SEE ALSO tty(4), ucom(4), usb(4) HISTORY The uplcom driver appeared in NetBSD 1.6. This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002. FreeBSD 15.1 January 7, 2021 UPLCOM(4)
NAME | SYNOPSIS | DESCRIPTION | HARDWARE | SYSCTL VARIABLES | FILES | SEE ALSO | HISTORY
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=uplcom&sektion=4&manpath=FreeBSD+15.1-RELEASE+and+Ports>