ZSHMISC(1) General Commands Manual ZSHMISC(1) NAME zshmisc - everything and then some SIMPLE COMMANDS & PIPELINES A simple command is a sequence of optional parameter assignments followed by blank-separated words, with optional redirections interspersed. For a description of assignment, see the beginning of zshparam(1). The first word is the command to be executed, and the remaining words, if any, are arguments to the command. If a command name is given, the parame- ter assignments modify the environment of the command when it is executed. The value of a simple command is its exit status, or 128 plus the signal number if terminated by a signal. For example, echo foo is a simple command with arguments. A pipeline is either a simple command, or a sequence of two or more simple commands where each command is separated from the next by `|' or `|&'. Where commands are separated by `|', the standard output of the first com- mand is connected to the standard input of the next. `|&' is shorthand for `2>&1 |', which connects both the standard output and the standard error of the command to the standard input of the next. The value of a pipeline is the value of the last command, unless the pipeline is preceded by `!' in which case the value is the logical inverse of the value of the last com- mand. For example, echo foo | sed 's/foo/bar/' is a pipeline, where the output (`foo' plus a newline) of the first command will be passed to the input of the second. If a pipeline is preceded by `coproc', it is executed as a coprocess; a two-way pipe is established between it and the parent shell. The shell can read from or write to the coprocess by means of the `>&p' and `<&p' redi- rection operators or with `print -p' and `read -p'. A pipeline cannot be preceded by both `coproc' and `!'. If job control is active, the coprocess can be treated in other than input and output as an ordinary background job. A sublist is either a single pipeline, or a sequence of two or more pipelines separated by `&&' or `||'. If two pipelines are separated by `&&', the second pipeline is executed only if the first succeeds (returns a zero status). If two pipelines are separated by `||', the second is exe- cuted only if the first fails (returns a nonzero status). Both operators have equal precedence and are left associative. The value of the sublist is the value of the last pipeline executed. For example, dmesg | grep panic && print yes is a sublist consisting of two pipelines, the second just a simple command which will be executed if and only if the grep command returns a zero sta- tus. If it does not, the value of the sublist is that return status, else it is the status returned by the print (almost certainly zero). A list is a sequence of zero or more sublists, in which each sublist is terminated by `;', `&', `&|', `&!', or a newline. This terminator may op- tionally be omitted from the last sublist in the list when the list appears as a complex command inside `(...)' or `{...}'. When a sublist is termi- nated by `;' or newline, the shell waits for it to finish before executing the next sublist. If a sublist is terminated by a `&', `&|', or `&!', the shell executes the last pipeline in it in the background, and does not wait for it to finish (note the difference from other shells which execute the whole sublist in the background). A backgrounded pipeline returns a status of zero. More generally, a list can be seen as a set of any shell commands whatso- ever, including the complex commands below; this is implied wherever the word `list' appears in later descriptions. For example, the commands in a shell function form a special sort of list. PRECOMMAND MODIFIERS A simple command may be preceded by a precommand modifier, which will alter how the command is interpreted. These modifiers are shell builtin commands with the exception of nocorrect which is a reserved word. - The command is executed with a `-' prepended to its argv[0] string. builtin The command word is taken to be the name of a builtin command, rather than a shell function or external command. command [ -pvV ] The command word is taken to be the name of an external command, rather than a shell function or builtin. If the POSIX_BUILTINS op- tion is set, builtins will also be executed but certain special properties of them are suppressed. The -p flag causes a default path to be searched instead of that in $path. With the -v flag, command is similar to whence and with -V, it is equivalent to whence -v. exec [ -cl ] [ -a argv0 ] The following command together with any arguments is run in place of the current process, rather than as a sub-process. The shell does not fork and is replaced. The shell does not invoke TRAPEXIT, nor does it source zlogout files. The options are provided for compati- bility with other shells. The -c option clears the environment. The -l option is equivalent to the - precommand modifier, to treat the replacement command as a login shell; the command is executed with a - prepended to its argv[0] string. This flag has no effect if used together with the -a option. The -a option is used to specify explicitly the argv[0] string (the name of the command as seen by the process itself) to be used by the replacement command and is directly equivalent to setting a value for the ARGV0 environment variable. nocorrect Spelling correction is not done on any of the words. This must ap- pear before any other precommand modifier, as it is interpreted im- mediately, before any parsing is done. It has no effect in non-in- teractive shells. noglob Filename generation (globbing) is not performed on any of the words. COMPLEX COMMANDS A complex command in zsh is one of the following: if list then list [ elif list then list ] ... [ else list ] fi The if list is executed, and if it returns a zero exit status, the then list is executed. Otherwise, the elif list is executed and if its status is zero, the then list is executed. If each elif list returns nonzero status, the else list is executed. for name ... [ in word ... ] term do list done Expand the list of words, and set the parameter name to each of them in turn, executing list each time. If the `in word' is omitted, use the positional parameters instead of the words. The term consists of one or more newline or ; which terminate the words, and are optional when the `in word' is omitted. More than one parameter name can appear before the list of words. If N names are given, then on each execution of the loop the next N words are assigned to the corresponding parameters. If there are more names than remaining words, the remaining parameters are each set to the empty string. Execution of the loop ends when there is no remaining word to assign to the first name. It is only possible for in to appear as the first name in the list, else it will be treated as marking the end of the list. for (( [expr1] ; [expr2] ; [expr3] )) do list done The arithmetic expression expr1 is evaluated first (see the section `Arithmetic Evaluation'). The arithmetic expression expr2 is re- peatedly evaluated until it evaluates to zero and when non-zero, list is executed and the arithmetic expression expr3 evaluated. If any expression is omitted, then it behaves as if it evaluated to 1. while list do list done Execute the do list as long as the while list returns a zero exit status. until list do list done Execute the do list as long as until list returns a nonzero exit status. repeat word do list done word is expanded and treated as an arithmetic expression, which must evaluate to a number n. list is then executed n times. The repeat syntax is disabled by default when the shell starts in a mode emulating another shell. It can be enabled with the command `enable -r repeat' case word in [ [(] pattern [ | pattern ] ... ) list (;;|;&|;|) ] ... esac Execute the list associated with the first pattern that matches word, if any. The form of the patterns is the same as that used for filename generation. See the section `Filename Generation'. Note further that, unless the SH_GLOB option is set, the whole pat- tern with alternatives is treated by the shell as equivalent to a group of patterns within parentheses, although white space may ap- pear about the parentheses and the vertical bar and will be stripped from the pattern at those points. White space may appear elsewhere in the pattern; this is not stripped. If the SH_GLOB option is set, so that an opening parenthesis can be unambiguously treated as part of the case syntax, the expression is parsed into separate words and these are treated as strict alternatives (as in other shells). If the list that is executed is terminated with ;& rather than ;;, the following list is also executed. The rule for the terminator of the following list ;;, ;& or ;| is applied unless the esac is reached. If the list that is executed is terminated with ;| the shell contin- ues to scan the patterns looking for the next match, executing the corresponding list, and applying the rule for the corresponding ter- minator ;;, ;& or ;|. Note that word is not re-expanded; all ap- plicable patterns are tested with the same word. select name [ in word ... term ] do list done where term is one or more newline or ; to terminate the words. Print the set of words, each preceded by a number. If the in word is omitted, use the positional parameters. The PROMPT3 prompt is printed and a line is read from the line editor if the shell is in- teractive and that is active, or else standard input. If this line consists of the number of one of the listed words, then the parame- ter name is set to the word corresponding to this number. If this line is empty, the selection list is printed again. Otherwise, the value of the parameter name is set to null. The contents of the line read from standard input is saved in the parameter REPLY. list is executed for each selection until a break or end-of-file is en- countered. ( list ) Execute list in a subshell. Traps set by the trap builtin are reset to their default values while executing list; an exception is that ignored signals will continue to be ignored if the option POSIXTRAPS is set. { list } Execute list. { try-list } always { always-list } First execute try-list. Regardless of errors, or break or continue commands encountered within try-list, execute always-list. Execu- tion then continues from the result of the execution of try-list; in other words, any error, or break or continue command is treated in the normal way, as if always-list were not present. The two chunks of code are referred to as the `try block' and the `always block'. Optional newlines or semicolons may appear after the always; note, however, that they may not appear between the preceding closing brace and the always. An `error' in this context is a condition such as a syntax error which causes the shell to abort execution of the current function, script, or list. Syntax errors encountered while the shell is pars- ing the code do not cause the always-list to be executed. For exam- ple, an erroneously constructed if block in try-list would cause the shell to abort during parsing, so that always-list would not be exe- cuted, while an erroneous substitution such as ${*foo*} would cause a run-time error, after which always-list would be executed. An error condition can be tested and reset with the special integer variable TRY_BLOCK_ERROR. Outside an always-list the value is ir- relevant, but it is initialised to -1. Inside always-list, the value is 1 if an error occurred in the try-list, else 0. If TRY_BLOCK_ERROR is set to 0 during the always-list, the error condi- tion caused by the try-list is reset, and shell execution continues normally after the end of always-list. Altering the value during the try-list is not useful (unless this forms part of an enclosing always block). Regardless of TRY_BLOCK_ERROR, after the end of always-list the nor- mal shell status $? is the value returned from try-list. This will be non-zero if there was an error, even if TRY_BLOCK_ERROR was set to zero. The following executes the given code, ignoring any errors it causes. This is an alternative to the usual convention of protect- ing code by executing it in a subshell. { # code which may cause an error } always { # This code is executed regardless of the error. (( TRY_BLOCK_ERROR = 0 )) } # The error condition has been reset. When a try block occurs outside of any function, a return or a exit encountered in try-list does not cause the execution of always-list. Instead, the shell exits immediately after any EXIT trap has been executed. Otherwise, a return command encountered in try-list will cause the execution of always-list, just like break and continue. function [ -T ] word ... [ () ] [ term ] { list } word ... () [ term ] { list } word ... () [ term ] command where term is one or more newline or ;. Define a function which is referenced by any one of word. Normally, only one word is provided; multiple words are usually only useful for setting traps. The body of the function is the list between the { and }. See the section `Functions'. The options of function have the following meanings: -T Enable tracing for this function, as though with functions -T. See the documentation of the -f option to the typeset builtin, in zshbuiltins(1). If the option SH_GLOB is set for compatibility with other shells, then whitespace may appear between the left and right parentheses when there is a single word; otherwise, the parentheses will be treated as forming a globbing pattern in that case. In any of the forms above, a redirection may appear outside the function body, for example func() { ... } 2>&1 The redirection is stored with the function and applied whenever the function is executed. Any variables in the redirection are expanded at the point the function is executed, but outside the function scope. time [ pipeline ] The pipeline is executed, and timing statistics are reported on the standard error in the form specified by the TIMEFMT parameter. If pipeline is omitted, print statistics about the shell process and its children. [[ exp ]] Evaluates the conditional expression exp and return a zero exit sta- tus if it is true. See the section `Conditional Expressions' for a description of exp. ALTERNATE FORMS FOR COMPLEX COMMANDS Many of zsh's complex commands have alternate forms. These are non-stan- dard and are likely not to be obvious even to seasoned shell programmers; they should not be used anywhere that portability of shell code is a con- cern. The short versions below only work if sublist is of the form `{ list }' or if the SHORT_LOOPS option is set. For the if, while and until commands, in both these cases the test part of the loop must also be suitably delimited, such as by `[[ ... ]]' or `(( ... ))', else the end of the test will not be recognized. For the for, repeat, case and select commands no such special form for the arguments is necessary, but the other condition (the special form of sublist or use of the SHORT_LOOPS option) still applies. The SHORT_REPEAT option is available to enable the short version only for the repeat command. if list { list } [ elif list { list } ] ... [ else { list } ] An alternate form of if. The rules mean that if [[ -o ignorebraces ]] { print yes } works, but if true { # Does not work! print yes } does not, since the test is not suitably delimited. if list sublist A short form of the alternate if. The same limitations on the form of list apply as for the previous form. for name ... ( word ... ) sublist A short form of for. for name ... [ in word ... ] term sublist where term is at least one newline or ;. Another short form of for. for (( [expr1] ; [expr2] ; [expr3] )) sublist A short form of the arithmetic for command. foreach name ... ( word ... ) list end Another form of for. while list { list } An alternative form of while. Note the limitations on the form of list mentioned above. until list { list } An alternative form of until. Note the limitations on the form of list mentioned above. repeat word sublist This is a short form of repeat. case word { [ [(] pattern [ | pattern ] ... ) list (;;|;&|;|) ] ... } An alternative form of case. select name [ in word ... term ] sublist where term is at least one newline or ;. A short form of select. function word ... [ () ] [ term ] sublist This is a short form of function. RESERVED WORDS The following words are recognized as reserved words when used as the first word of a command unless quoted or disabled using disable -r: do done esac then elif else fi for case if while function repeat time until select coproc nocorrect foreach end ! [[ { } declare export float integer local readonly typeset Additionally, `}' is recognized in any position if neither the IG- NORE_BRACES option nor the IGNORE_CLOSE_BRACES option is set. ERRORS Certain errors are treated as fatal by the shell: in an interactive shell, they cause control to return to the command line, and in a non-interactive shell they cause the shell to be aborted. In older versions of zsh, a non-interactive shell running a script would not abort completely, but would resume execution at the next command to be read from the script, skipping the remainder of any functions or shell constructs such as loops or conditions; this somewhat illogical behaviour can be recovered by set- ting the option CONTINUE_ON_ERROR. Fatal errors found in non-interactive shells include: * Failure to parse shell options passed when invoking the shell * Failure to change options with the set builtin * Parse errors of all sorts, including failures to parse mathematical expressions * Failures to set or modify variable behaviour with typeset, local, declare, export, integer, float * Execution of incorrectly positioned loop control structures (con- tinue, break) * Attempts to use regular expression with no regular expression module available * Disallowed operations when the RESTRICTED options is set * Failure to create a pipe needed for a pipeline * Failure to create a multio * Failure to autoload a module needed for a declared shell feature * Errors creating command or process substitutions * Syntax errors in glob qualifiers * File generation errors where not caught by the option BAD_PATTERN * All bad patterns used for matching within case statements * File generation failures where not caused by NO_MATCH or similar op- tions * All file generation errors where the pattern was used to create a multio * Memory errors where detected by the shell * Invalid subscripts to shell variables * Attempts to assign read-only variables * Logical errors with variables such as assignment to the wrong type * Use of invalid variable names * Errors in variable substitution syntax * Failure to convert characters in $'...' expressions If the POSIX_BUILTINS option is set, more errors associated with shell builtin commands are treated as fatal, as specified by the POSIX standard. COMMENTS In non-interactive shells, or in interactive shells with the INTERAC- TIVE_COMMENTS option set, a word beginning with the third character of the histchars parameter (`#' by default) causes that word and all the following characters up to a newline to be ignored. ALIASING Every eligible word in the shell input is checked to see if there is an alias defined for it. If so, it is replaced by the text of the alias if it is in command position (if it could be the first word of a simple command), or if the alias is global. If the replacement text ends with a space, the next word in the shell input is always eligible for purposes of alias ex- pansion. It is an error for the function name, word, in the sh-compatible function definition syntax `word () ...' to be a word that resulted from alias ex- pansion, unless the ALIAS_FUNC_DEF option is set. An alias is defined using the alias builtin; global aliases may be defined using the -g option to that builtin. A word is defined as: * Any plain string or glob pattern * Any quoted string, using any quoting method (note that the quotes must be part of the alias definition for this to be eligible) * Any parameter reference or command substitution * Any series of the foregoing, concatenated without whitespace or other tokens between them * Any reserved word (case, do, else, etc.) * With global aliasing, any command separator, any redirection opera- tor, and `(' or `)' when not part of a glob pattern Alias expansion is done on the shell input before any other expansion ex- cept history expansion. Therefore, if an alias is defined for the word foo, alias expansion may be avoided by quoting part of the word, e.g. \foo. Any form of quoting works, although there is nothing to prevent an alias being defined for the quoted form such as \foo as well. In particular, note that quoting must be used when using unalias to remove global aliases: % alias -g foo=bar % unalias foo unalias: no such hash table element: bar % unalias \foo % When POSIX_ALIASES is set, only plain unquoted strings are eligible for aliasing. The alias builtin does not reject ineligible aliases, but they are not expanded. For use with completion, which would remove an initial backslash followed by a character that isn't special, it may be more convenient to quote the word by starting with a single quote, i.e. 'foo; completion will automati- cally add the trailing single quote. Alias difficulties Although aliases can be used in ways that bend normal shell syntax, not every string of non-white-space characters can be used as an alias. Any set of characters not listed as a word above is not a word, hence no attempt is made to expand it as an alias, no matter how it is defined (i.e. via the builtin or the special parameter aliases described in the section THE ZSH/PARAMETER MODULE in zshmodules(1)). However, as noted in the case of POSIX_ALIASES above, the shell does not attempt to deduce whether the string corresponds to a word at the time the alias is created. For example, an expression containing an = at the start of a command line is an assignment and cannot be expanded as an alias; a lone = is not an as- signment but can only be set as an alias using the parameter, as otherwise the = is taken part of the syntax of the builtin command. It is not presently possible to alias the `((' token that introduces arith- metic expressions, because until a full statement has been parsed, it can- not be distinguished from two consecutive `(' tokens introducing nested subshells. Also, if a separator such as && is aliased, \&& turns into the two tokens \& and &, each of which may have been aliased separately. Simi- larly for \<<, \>|, etc. There is a commonly encountered problem with aliases illustrated by the following code: alias echobar='echo bar'; echobar This prints a message that the command echobar could not be found. This happens because aliases are expanded when the code is read in; the entire line is read in one go, so that when echobar is executed it is too late to expand the newly defined alias. This is often a problem in shell scripts, functions, and code executed with `source' or `.'. Consequently, use of functions rather than aliases is recommended in non-interactive code. QUOTING A character may be quoted (that is, made to stand for itself) by preceding it with a `\'. `\' followed by a newline is ignored. A string enclosed between `$'' and `'' is processed the same way as the string arguments of the print builtin, and the resulting string is consid- ered to be entirely quoted. A literal `'' character can be included in the string by using the `\'' escape. All characters enclosed between a pair of single quotes ('') that is not preceded by a `$' are quoted. A single quote cannot appear within single quotes unless the option RC_QUOTES is set, in which case a pair of single quotes are turned into a single quote. For example, print '''' outputs nothing apart from a newline if RC_QUOTES is not set, but one sin- gle quote if it is set. Inside double quotes (""), parameter and command substitution occur, and `\' quotes the characters `\', ``', `"', `$', and the first character of $histchars (default `!'). REDIRECTION If a command is followed by & and job control is not active, then the de- fault standard input for the command is the empty file /dev/null. Other- wise, the environment for the execution of a command contains the file de- scriptors of the invoking shell as modified by input/output specifications. The following may appear anywhere in a simple command or may precede or follow a complex command. Expansion occurs before word or digit is used except as noted below. If the result of substitution on word produces more than one filename, redirection occurs for each separate filename in turn. < word Open file word for reading as standard input. It is an error to open a file in this fashion if it does not exist. <> word Open file word for reading and writing as standard input. If the file does not exist then it is created. > word Open file word for writing as standard output. If the file does not exist then it is created. If the file exists, and the CLOBBER op- tion is unset, this causes an error; otherwise, it is truncated to zero length. >| word >! word Same as >, except that the file is truncated to zero length if it exists, regardless of CLOBBER. >> word Open file word for writing in append mode as standard output. If the file does not exist, and the CLOBBER and APPEND_CREATE options are both unset, this causes an error; otherwise, the file is cre- ated. >>| word >>! word Same as >>, except that the file is created if it does not exist, regardless of CLOBBER and APPEND_CREATE. <<[-] word The shell input is read up to a line that is the same as word, or to an end-of-file. No parameter expansion, command substitution or filename generation is performed on word. The resulting document, called a here-document, becomes the standard input. If any character of word is quoted with single or double quotes or a `\', no interpretation is placed upon the characters of the docu- ment. Otherwise, parameter and command substitution occurs, `\' followed by a newline is removed, and `\' must be used to quote the characters `\', `$', ``' and the first character of word. Note that word itself does not undergo shell expansion. Backquotes in word do not have their usual effect; instead they behave simi- larly to double quotes, except that the backquotes themselves are passed through unchanged. (This information is given for complete- ness and it is not recommended that backquotes be used.) Quotes in the form $'...' have their standard effect of expanding backslashed references to special characters. If <<- is used, then all leading tabs are stripped from word and from the document. <<< word Perform shell expansion on word and pass the result to standard in- put. This is known as a here-string. Compare the use of word in here-documents above, where word does not undergo shell expansion. The result will have a trailing newline after it. <& number >& number The standard input/output is duplicated from file descriptor number (see dup2(2)). <& - >& - Close the standard input/output. <& p >& p The input/output from/to the coprocess is moved to the standard in- put/output. >& word &> word (Except where `>& word' matches one of the above syntaxes; `&>' can always be used to avoid this ambiguity.) Redirects both standard output and standard error (file descriptor 2) in the manner of `> word'. Note that this does not have the same effect as `> word 2>&1' in the presence of multios (see the section below). >&| word >&! word &>| word &>! word Redirects both standard output and standard error (file descriptor 2) in the manner of `>| word'. >>& word &>> word Redirects both standard output and standard error (file descriptor 2) in the manner of `>> word'. >>&| word >>&! word &>>| word &>>! word Redirects both standard output and standard error (file descriptor 2) in the manner of `>>| word'. If one of the above is preceded by a digit, then the file descriptor re- ferred to is that specified by the digit instead of the default 0 or 1. The order in which redirections are specified is significant. The shell evaluates each redirection in terms of the (file descriptor, file) associa- tion at the time of evaluation. For example: ... 1>fname 2>&1 first associates file descriptor 1 with file fname. It then associates file descriptor 2 with the file associated with file descriptor 1 (that is, fname). If the order of redirections were reversed, file descriptor 2 would be associated with the terminal (assuming file descriptor 1 had been) and then file descriptor 1 would be associated with file fname. The `|&' command separator described in Simple Commands & Pipelines in zsh- misc(1) is a shorthand for `2>&1 |'. The various forms of process substitution, `<(list)', and `=(list)' for in- put and `>(list)' for output, are often used together with redirection. For example, if word in an output redirection is of the form `>(list)' then the output is piped to the command represented by list. See Process Sub- stitution in zshexpn(1). OPENING FILE DESCRIPTORS USING PARAMETERS When the shell is parsing arguments to a command, and the shell option IG- NORE_BRACES is not set, a different form of redirection is allowed: instead of a digit before the operator there is a valid shell identifier enclosed in braces. The shell will open a new file descriptor that is guaranteed to be at least 10 and set the parameter named by the identifier to the file descriptor opened. No whitespace is allowed between the closing brace and the redirection character. For example: ... {myfd}>&1 This opens a new file descriptor that is a duplicate of file descriptor 1 and sets the parameter myfd to the number of the file descriptor, which will be at least 10. The new file descriptor can be written to using the syntax >&$myfd. The file descriptor remains open in subshells and forked external executables. The syntax {varid}>&-, for example {myfd}>&-, may be used to close a file descriptor opened in this fashion. Note that the parameter given by varid must previously be set to a file descriptor in this case. It is an error to open or close a file descriptor in this fashion when the parameter is readonly. However, it is not an error to read or write a file descriptor using <&$param or >&$param if param is readonly. If the option CLOBBER is unset, it is an error to open a file descriptor using a parameter that is already set to an open file descriptor previously allocated by this mechanism. Unsetting the parameter before using it for allocating a file descriptor avoids the error. Note that this mechanism merely allocates or closes a file descriptor; it does not perform any redirections from or to it. It is usually convenient to allocate a file descriptor prior to use as an argument to exec. The syntax does not in any case work when used around complex commands such as parenthesised subshells or loops, where the opening brace is interpreted as part of a command list to be executed in the current shell. The following shows a typical sequence of allocation, use, and closing of a file descriptor: integer myfd exec {myfd}>~/logs/mylogfile.txt print This is a log message. >&$myfd exec {myfd}>&- Note that the expansion of the variable in the expression >&$myfd occurs at the point the redirection is opened. This is after the expansion of com- mand arguments and after any redirections to the left on the command line have been processed. MULTIOS If the user tries to open a file descriptor for writing more than once, the shell opens the file descriptor as a pipe to a process that copies its in- put to all the specified outputs, similar to tee, provided the MULTIOS op- tion is set, as it is by default. Thus: date >foo >bar writes the date to two files, named `foo' and `bar'. Note that a pipe is an implicit redirection; thus date >foo | cat writes the date to the file `foo', and also pipes it to cat. Note that the shell opens all the files to be used in the multio process immediately, not at the point they are about to be written. Note also that redirections are always expanded in order. This happens re- gardless of the setting of the MULTIOS option, but with the option in ef- fect there are additional consequences. For example, the meaning of the ex- pression >&1 will change after a previous redirection: date >&1 >output In the case above, the >&1 refers to the standard output at the start of the line; the result is similar to the tee command. However, consider: date >output >&1 As redirections are evaluated in order, when the >&1 is encountered the standard output is set to the file output and another copy of the output is therefore sent to that file. This is unlikely to be what is intended. If the MULTIOS option is set, the word after a redirection operator is also subjected to filename generation (globbing). Thus : > * will truncate all files in the current directory, assuming there's at least one. (Without the MULTIOS option, it would create an empty file called `*'.) Similarly, you can do echo exit 0 >> *.sh If the user tries to open a file descriptor for reading more than once, the shell opens the file descriptor as a pipe to a process that copies all the specified inputs to its output in the order specified, provided the MULTIOS option is set. It should be noted that each file is opened immediately, not at the point where it is about to be read: this behaviour differs from cat, so if strictly standard behaviour is needed, cat should be used in- stead. Thus sort <foo <fubar or even sort <f{oo,ubar} is equivalent to `cat foo fubar | sort'. Expansion of the redirection argument occurs at the point the redirection is opened, at the point described above for the expansion of the variable in >&$myfd. Note that a pipe is an implicit redirection; thus cat bar | sort <foo is equivalent to `cat bar foo | sort' (note the order of the inputs). If the MULTIOS option is unset, each redirection replaces the previous redirection for that file descriptor. However, all files redirected to are actually opened, so echo Hello > bar > baz when MULTIOS is unset will truncate `bar', and write `Hello' into `baz'. There is a problem when an output multio is attached to an external pro- gram. A simple example shows this: cat file >file1 >file2 cat file1 file2 Here, it is possible that the second `cat' will not display the full con- tents of file1 and file2 (i.e. the original contents of file repeated twice). The reason for this is that the multios are spawned after the cat process is forked from the parent shell, so the parent shell does not wait for the multios to finish writing data. This means the command as shown can exit before file1 and file2 are completely written. As a workaround, it is pos- sible to run the cat process as part of a job in the current shell: { cat file } >file >file2 Here, the {...} job will pause to wait for both files to be written. REDIRECTIONS WITH NO COMMAND When a simple command consists of one or more redirection operators and zero or more parameter assignments, but no command name, zsh can behave in several ways. If the parameter NULLCMD is not set or the option CSH_NULLCMD is set, an error is caused. This is the csh behavior and CSH_NULLCMD is set by de- fault when emulating csh. If the option SH_NULLCMD is set, the builtin `:' is inserted as a command with the given redirections. This is the default when emulating sh or ksh. Otherwise, if the parameter NULLCMD is set, its value will be used as a command with the given redirections. If both NULLCMD and READNULLCMD are set, then the value of the latter will be used instead of that of the for- mer when the redirection is an input. The default for NULLCMD is `cat' and for READNULLCMD is `more'. Thus < file shows the contents of file on standard output, with paging if that is a terminal. NULLCMD and READNULLCMD may refer to shell functions. COMMAND EXECUTION If a command name contains no slashes, the shell attempts to locate it. If there exists a shell function by that name, the function is invoked as de- scribed in the section `Functions'. If there exists a shell builtin by that name, the builtin is invoked. Otherwise, the shell searches each element of $path for a directory con- taining an executable file by that name. If execution fails: an error message is printed, and one of the following values is returned. 127 The search was unsuccessful. The error message is `command not found: cmd'. 126 The executable file has insufficient permissions, is a directory or special file, or is not a script and is in a format unrecognized by the operating system. The exact conditions and error message are operating system-dependent; see execve(2). If execution fails because the file is not in executable format, and the file is not a directory, it is assumed to be a shell script. /bin/sh is spawned to execute it. If the program is a file beginning with `#!', the remainder of the first line specifies an interpreter for the program. The shell will execute the specified interpreter on operating systems that do not handle this executable format in the kernel. If no external command is found but a function command_not_found_handler exists the shell executes this function with all command line arguments. The return status of the function becomes the status of the command. Note that the handler is executed in a subshell forked to execute an external command, hence changes to directories, shell parameters, etc. have no ef- fect on the main shell. FUNCTIONS Shell functions are defined with the function reserved word or the special syntax `funcname ()'. Shell functions are read in and stored internally. Alias names are resolved when the function is read. Functions are executed like commands with the arguments passed as positional parameters. (See the section `Command Execution'.) Functions execute in the same process as the caller and share all files and present working directory with the caller. A trap on EXIT set inside a function is executed after the function completes in the environment of the caller. The return builtin is used to return from function calls. Function identifiers can be listed with the functions builtin. Functions can be undefined with the unfunction builtin. AUTOLOADING FUNCTIONS A function can be marked as undefined using the autoload builtin (or `func- tions -u' or `typeset -fu'). Such a function has no body. When the func- tion is first executed, the shell searches for its definition using the el- ements of the fpath variable. Thus to define functions for autoloading, a typical sequence is: fpath=(~/myfuncs $fpath) autoload myfunc1 myfunc2 ... The usual alias expansion during reading will be suppressed if the autoload builtin or its equivalent is given the option -U. This is recommended for the use of functions supplied with the zsh distribution. Note that for functions precompiled with the zcompile builtin command the flag -U must be provided when the .zwc file is created, as the corresponding information is compiled into the latter. For each element in fpath, the shell looks for three possible files, the newest of which is used to load the definition for the function: element.zwc A file created with the zcompile builtin command, which is expected to contain the definitions for all functions in the directory named element. The file is treated in the same manner as a directory con- taining files for functions and is searched for the definition of the function. If the definition is not found, the search for a de- finition proceeds with the other two possibilities described below. If element already includes a .zwc extension (i.e. the extension was explicitly given by the user), element is searched for the defini- tion of the function without comparing its age to that of other files; in fact, there does not need to be any directory named ele- ment without the suffix. Thus including an element such as `/usr/local/funcs.zwc' in fpath will speed up the search for func- tions, with the disadvantage that functions included must be explic- itly recompiled by hand before the shell notices any changes. element/function.zwc A file created with zcompile, which is expected to contain the defi- nition for function. It may include other function definitions as well, but those are neither loaded nor executed; a file found in this way is searched only for the definition of function. element/function A file of zsh command text, taken to be the definition for function. In summary, the order of searching is, first, in the parents of directories in fpath for the newer of either a compiled directory or a directory in fpath; second, if more than one of these contains a definition for the function that is sought, the leftmost in the fpath is chosen; and third, within a directory, the newer of either a compiled function or an ordinary function definition is used. If the KSH_AUTOLOAD option is set, or the file contains only a simple defi- nition of the function, the file's contents will be executed. This will normally define the function in question, but may also perform initializa- tion, which is executed in the context of the function execution, and may therefore define local parameters. It is an error if the function is not defined by loading the file. Otherwise, the function body (with no surrounding `funcname() {...}') is taken to be the complete contents of the file. This form allows the file to be used directly as an executable shell script. If processing of the file results in the function being re-defined, the function itself is not re-executed. To force the shell to perform initialization and then call the function defined, the file should contain initialization code (which will be executed then discarded) in addition to a complete function defini- tion (which will be retained for subsequent calls to the function), and a call to the shell function, including any arguments, at the end. For example, suppose the autoload file func contains func() { print This is func; } print func is initialized then `func; func' with KSH_AUTOLOAD set will produce both messages on the first call, but only the message `This is func' on the second and subse- quent calls. Without KSH_AUTOLOAD set, it will produce the initialization message on the first call, and the other message on the second and subse- quent calls. It is also possible to create a function that is not marked as autoloaded, but which loads its own definition by searching fpath, by using `autoload -X' within a shell function. For example, the following are equivalent: myfunc() { autoload -X } myfunc args... and unfunction myfunc # if myfunc was defined autoload myfunc myfunc args... In fact, the functions command outputs `builtin autoload -X' as the body of an autoloaded function. This is done so that eval "$(functions)" produces a reasonable result. A true autoloaded function can be identified by the presence of the comment `# undefined' in the body, because all com- ments are discarded from defined functions. To load the definition of an autoloaded function myfunc without executing myfunc, use: autoload +X myfunc ANONYMOUS FUNCTIONS If no name is given for a function, it is `anonymous' and is handled spe- cially. Either form of function definition may be used: a `()' with no preceding name, or a `function' with an immediately following open brace. The function is executed immediately at the point of definition and is not stored for future use. The function name is set to `(anon)'. Arguments to the function may be specified as words following the closing brace defining the function, hence if there are none no arguments (other than $0) are set. This is a difference from the way other functions are parsed: normal function definitions may be followed by certain keywords such as `else' or `fi', which will be treated as arguments to anonymous functions, so that a newline or semicolon is needed to force keyword inter- pretation. Note also that the argument list of any enclosing script or function is hidden (as would be the case for any other function called at this point). Redirections may be applied to the anonymous function in the same manner as to a current-shell structure enclosed in braces. The main use of anonymous functions is to provide a scope for local variables. This is particularly convenient in start-up files as these do not provide their own local vari- able scope. For example, variable=outside function { local variable=inside print "I am $variable with arguments $*" } this and that print "I am $variable" outputs the following: I am inside with arguments this and that I am outside Note that function definitions with arguments that expand to nothing, for example `name=; function $name { ... }', are not treated as anonymous func- tions. Instead, they are treated as normal function definitions where the definition is silently discarded. SPECIAL FUNCTIONS Certain functions, if defined, have special meaning to the shell. Hook Functions For the functions below, it is possible to define an array that has the same name as the function with `_functions' appended. Any element in such an array is taken as the name of a function to execute; it is executed in the same context and with the same arguments and same initial value of $? as the basic function. For example, if $chpwd_functions is an array con- taining the values `mychpwd', `chpwd_save_dirstack', then the shell at- tempts to execute the functions `chpwd', `mychpwd' and `ch- pwd_save_dirstack', in that order. Any function that does not exist is silently ignored. A function found by this mechanism is referred to else- where as a hook function. An error in any function causes subsequent func- tions not to be run. Note further that an error in a precmd hook causes an immediately following periodic function not to run (though it may run at the next opportunity). chpwd Executed whenever the current working directory is changed. periodic If the parameter PERIOD is set, this function is executed every $PE- RIOD seconds, just before a prompt. Note that if multiple functions are defined using the array periodic_functions only one period is applied to the complete set of functions, and the scheduled time is not reset if the list of functions is altered. Hence the set of functions is always called together. precmd Executed before each prompt. Note that precommand functions are not re-executed simply because the command line is redrawn, as happens, for example, when a notification about an exiting job is displayed. preexec Executed just after a command has been read and is about to be exe- cuted. If the history mechanism is active (regardless of whether the line was discarded from the history buffer), the string that the user typed is passed as the first argument, otherwise it is an empty string. The actual command that will be executed (including ex- panded aliases) is passed in two different forms: the second argu- ment is a single-line, size-limited version of the command (with things like function bodies elided); the third argument contains the full text that is being executed. zshaddhistory Executed when a history line has been read interactively, but before it is executed. The sole argument is the complete history line (so that any terminating newline will still be present). If any of the hook functions returns status 1 (or any non-zero value other than 2, though this is not guaranteed for future versions of the shell) the history line will not be saved, although it lingers in the history until the next line is executed, allowing you to reuse or edit it immediately. If any of the hook functions returns status 2 the history line will be saved on the internal history list, but not written to the his- tory file. In case of a conflict, the first non-zero status value is taken. A hook function may call `fc -p ...' to switch the history context so that the history is saved in a different file from that in the global HISTFILE parameter. This is handled specially: the history context is automatically restored after the processing of the his- tory line is finished. The following example function works with one of the options INC_AP- PEND_HISTORY or SHARE_HISTORY set, in order that the line is written out immediately after the history entry is added. It first adds the history line to the normal history with the newline stripped, which is usually the correct behaviour. Then it switches the history con- text so that the line will be written to a history file in the cur- rent directory. zshaddhistory() { print -sr -- ${1%%$'\n'} fc -p .zsh_local_history } zshexit Executed at the point where the main shell is about to exit nor- mally. This is not called by exiting subshells, nor when the exec precommand modifier is used before an external command. Also, un- like TRAPEXIT, it is not called when functions exit. Trap Functions The functions below are treated specially but do not have corresponding hook arrays. TRAPNAL If defined and non-null, this function will be executed whenever the shell catches a signal SIGNAL, where NAL is a signal name as speci- fied for the kill builtin. The signal number will be passed as the first parameter to the function. If a function of this form is defined and null, the shell and processes spawned by it will ignore SIGNAL. The return status from the function is handled specially. If it is zero, the signal is assumed to have been handled, and execution con- tinues normally. Otherwise, the shell will behave as interrupted except that the return status of the trap is retained. Programs terminated by uncaught signals typically return the status 128 plus the signal number. Hence the following causes the handler for SIGINT to print a message, then mimic the usual effect of the signal. TRAPINT() { print "Caught SIGINT, aborting." return $(( 128 + $1 )) } The functions TRAPZERR, TRAPDEBUG and TRAPEXIT are never executed inside other traps. TRAPDEBUG If the option DEBUG_BEFORE_CMD is set (as it is by default), exe- cuted before each command; otherwise executed after each command. See the description of the trap builtin in zshbuiltins(1) for de- tails of additional features provided in debug traps. TRAPEXIT Executed when the shell exits, or when the current function exits if defined inside a function. The value of $? at the start of execu- tion is the exit status of the shell or the return status of the function exiting. TRAPZERR Executed whenever a command has a non-zero exit status. However, the function is not executed if the command occurred in a sublist followed by `&&' or `||'; only the final command in a sublist of this type causes the trap to be executed. The function TRAPERR acts the same as TRAPZERR on systems where there is no SIGERR (this is the usual case). The functions beginning `TRAP' may alternatively be defined with the trap builtin: this may be preferable for some uses. Setting a trap with one form removes any trap of the other form for the same signal; removing a trap in either form removes all traps for the same signal. The forms TRAPNAL() { # code } ('function traps') and trap ' # code ' NAL ('list traps') are equivalent in most ways, the exceptions being the fol- lowing: * Function traps have all the properties of normal functions, appear- ing in the list of functions and being called with their own func- tion context rather than the context where the trap was triggered. * The return status from function traps is special, whereas a return from a list trap causes the surrounding context to return with the given status. * Function traps are not reset within subshells, in accordance with zsh behaviour; list traps are reset, in accordance with POSIX behav- iour. JOBS If the MONITOR option is set, an interactive shell associates a job with each pipeline. It keeps a table of current jobs, printed by the jobs com- mand, and assigns them small integer numbers. When a job is started asyn- chronously with `&', the shell prints a line to standard error which looks like: [1] 1234 indicating that the job which was started asynchronously was job number 1 and had one (top-level) process, whose process ID was 1234. If a job is started with `&|' or `&!', then that job is immediately dis- owned. After startup, it does not have a place in the job table, and is not subject to the job control features described here. If you are running a job and wish to do something else you may hit the key ^Z (control-Z) which sends a TSTP signal to the current job: this key may be redefined by the susp option of the external stty command. The shell will then normally indicate that the job has been `suspended', and print another prompt. You can then manipulate the state of this job, putting it in the background with the bg command, or run some other commands and then eventually bring the job back into the foreground with the foreground com- mand fg. A ^Z takes effect immediately and is like an interrupt in that pending output and unread input are discarded when it is typed. A job being run in the background will suspend if it tries to read from the terminal. Note that if the job running in the foreground is a shell function, then suspending it will have the effect of causing the shell to fork. This is necessary to separate the function's state from that of the parent shell performing the job control, so that the latter can return to the command line prompt. As a result, even if fg is used to continue the job the func- tion will no longer be part of the parent shell, and any variables set by the function will not be visible in the parent shell. Thus the behaviour is different from the case where the function was never suspended. Zsh is different from many other shells in this regard. One additional side effect is that use of disown with a job created by sus- pending shell code in this fashion is delayed: the job can only be disowned once any process started from the parent shell has terminated. At that point, the disowned job disappears silently from the job list. The same behaviour is found when the shell is executing code as the right hand side of a pipeline or any complex shell construct such as if, for, etc., in order that the entire block of code can be managed as a single job. Background jobs are normally allowed to produce output, but this can be disabled by giving the command `stty tostop'. If you set this tty op- tion, then background jobs will suspend when they try to produce output like they do when they try to read input. When a command is suspended and continued later with the fg or wait builtins, zsh restores tty modes that were in effect when it was suspended. This (intentionally) does not apply if the command is continued via `kill -CONT', nor when it is continued with bg. There are several ways to refer to jobs in the shell. A job can be re- ferred to by the process ID of any process of the job or by one of the fol- lowing: %number The job with the given number. %string The last job whose command line begins with string. %?string The last job whose command line contains string. %% Current job. %+ Equivalent to `%%'. %- Previous job. The shell learns immediately whenever a process changes state. It normally informs you whenever a job becomes blocked so that no further progress is possible. If the NOTIFY option is not set, it waits until just before it prints a prompt before it informs you. All such notifications are sent di- rectly to the terminal, not to the standard output or standard error. When the monitor mode is on, each background job that completes triggers any trap set for CHLD. When you try to leave the shell while jobs are running or suspended, you will be warned that `You have suspended (running) jobs'. You may use the jobs command to see what they are. If you do this or immediately try to exit again, the shell will not warn you a second time; the suspended jobs will be terminated, and the running jobs will be sent a SIGHUP signal, if the HUP option is set. To avoid having the shell terminate the running jobs, either use the no- hup(1) command or the disown builtin. SIGNALS The INT and QUIT signals for an invoked command are ignored if the command is followed by `&' and the MONITOR option is not active. The shell itself always ignores the QUIT signal. Otherwise, signals have the values inher- ited by the shell from its parent (but see the TRAPNAL special functions in the section `Functions'). Certain jobs are run asynchronously by the shell other than those explic- itly put into the background; even in cases where the shell would usually wait for such jobs, an explicit exit command or exit due to the option ERR_EXIT will cause the shell to exit without waiting. Examples of such asynchronous jobs are process substitution, see the section PROCESS SUBSTI- TUTION in the zshexpn(1) manual page, and the handler processes for mul- tios, see the section MULTIOS in the zshmisc(1) manual page. ARITHMETIC EVALUATION The shell can perform integer and floating point arithmetic, either using the builtin let, or via a substitution of the form $((...)). For integers, the shell is usually compiled to use 8-byte precision where this is avail- able, otherwise precision is 4 bytes. This can be tested, for example, by giving the command `print - $(( 12345678901 ))'; if the number appears un- changed, the precision is at least 8 bytes. Floating point arithmetic al- ways uses the `double' type with whatever corresponding precision is pro- vided by the compiler and the library. The let builtin command takes arithmetic expressions as arguments; each is evaluated separately. Since many of the arithmetic operators, as well as spaces, require quoting, an alternative form is provided: for any command which begins with a `((', all the characters until a matching `))' are treated as a double-quoted expression and arithmetic expansion performed as for an argument of let. More precisely, `((...))' is equivalent to `let "..."'. The return status is 0 if the arithmetic value of the expression is non-zero, 1 if it is zero, and 2 if an error occurred. For example, the following statement (( val = 2 + 1 )) is equivalent to let "val = 2 + 1" both assigning the value 3 to the shell variable val and returning a zero status. Integers can be in bases other than 10. A leading `0x' or `0X' denotes hexadecimal and a leading `0b' or `0B' binary. Integers may also be of the form `base#n', where base is a decimal number between two and thirty-six representing the arithmetic base and n is a number in that base (for exam- ple, `16#ff' is 255 in hexadecimal). The base# may also be omitted, in which case base 10 is used. For backwards compatibility the form `[base]n' is also accepted. An integer expression or a base given in the form `base#n' may contain un- derscores (`_') after the leading digit for visual guidance; these are ig- nored in computation. Examples are 1_000_000 or 0xffff_ffff which are equivalent to 1000000 and 0xffffffff respectively. It is also possible to specify a base to be used for output in the form `[#base]', for example `[#16]'. This is used when outputting arithmetical substitutions or when assigning to scalar parameters, but an explicitly de- fined integer or floating point parameter will not be affected. If an in- teger variable is implicitly defined by an arithmetic expression, any base specified in this way will be set as the variable's output arithmetic base as if the option `-i base' to the typeset builtin had been used. The ex- pression has no precedence and if it occurs more than once in a mathemati- cal expression, the last encountered is used. For clarity it is recom- mended that it appear at the beginning of an expression. As an example: typeset -i 16 y print $(( [#8] x = 32, y = 32 )) print $x $y outputs first `8#40', the rightmost value in the given output base, and then `8#40 16#20', because y has been explicitly declared to have output base 16, while x (assuming it does not already exist) is implicitly typed by the arithmetic evaluation, where it acquires the output base 8. The base may be replaced or followed by an underscore, which may itself be followed by a positive integer (if it is missing the value 3 is used). This indicates that underscores should be inserted into the output string, grouping the number for visual clarity. The following integer specifies the number of digits to group together. For example: setopt cbases print $(( [#16_4] 65536 ** 2 )) outputs `0x1_0000_0000'. The feature can be used with floating point numbers, in which case the base must be omitted; grouping is away from the decimal point. For example, zmodload zsh/mathfunc print $(( [#_] sqrt(1e7) )) outputs `3_162.277_660_168_379_5' (the number of decimal places shown may vary). If the C_BASES option is set, hexadecimal numbers are output in the stan- dard C format, for example `0xFF' instead of the usual `16#FF'. If the op- tion OCTAL_ZEROES is also set (it is not by default), octal numbers will be treated similarly and hence appear as `077' instead of `8#77'. This option has no effect on the output of bases other than hexadecimal and octal, and these formats are always understood on input. When an output base is specified using the `[#base]' syntax, an appropriate base prefix will be output if necessary, so that the value output is valid syntax for input. If the # is doubled, for example `[##16]', then no base prefix is output. Floating point constants are recognized by the presence of a decimal point or an exponent. The decimal point may be the first character of the con- stant, but the exponent character e or E may not, as it will be taken for a parameter name. All numeric parts (before and after the decimal point and in the exponent) may contain underscores after the leading digit for visual guidance; these are ignored in computation. An arithmetic expression uses nearly the same syntax and associativity of expressions as in C. In the native mode of operation, the following operators are supported (listed in decreasing order of precedence): + - ! ~ ++ -- unary plus/minus, logical NOT, complement, {pre,post}{in,de}crement << >> bitwise shift left, right & bitwise AND ^ bitwise XOR | bitwise OR ** exponentiation * / % multiplication, division, modulus (remainder) + - addition, subtraction < > <= >= comparison == != equality and inequality && logical AND || ^^ logical OR, XOR ? : ternary operator = += -= *= /= %= &= ^= |= <<= >>= &&= ||= ^^= **= assignment , comma operator The operators `&&', `||', `&&=', and `||=' are short-circuiting, and only one of the latter two expressions in a ternary operator is evaluated. Note the precedence of the bitwise AND, OR, and XOR operators. With the option C_PRECEDENCES the precedences (but no other properties) of the operators are altered to be the same as those in most other languages that support the relevant operators: + - ! ~ ++ -- unary plus/minus, logical NOT, complement, {pre,post}{in,de}crement ** exponentiation * / % multiplication, division, modulus (remainder) + - addition, subtraction << >> bitwise shift left, right < > <= >= comparison == != equality and inequality & bitwise AND ^ bitwise XOR | bitwise OR && logical AND ^^ logical XOR || logical OR ? : ternary operator = += -= *= /= %= &= ^= |= <<= >>= &&= ||= ^^= **= assignment , comma operator Note the precedence of exponentiation in both cases is below that of unary operators, hence `-3**2' evaluates as `9', not `-9'. Use parentheses where necessary: `-(3**2)'. This is for compatibility with other shells. Mathematical functions can be called with the syntax `func(args)', where the function decides if the args is used as a string or a comma-separated list of arithmetic expressions. The shell currently defines no mathematical functions by default, but the module zsh/mathfunc may be loaded with the zmodload builtin to provide standard floating point mathematical functions. An expression of the form `##x' where x is any character sequence such as `a', `^A', or `\M-\C-x' gives the value of this character and an expression of the form `#name' gives the value of the first character of the contents of the parameter name. Character values are according to the character set used in the current locale; for multibyte character handling the option MULTIBYTE must be set. Note that this form is different from `$#name', a standard parameter substitution which gives the length of the parameter name. `#\' is accepted instead of `##', but its use is deprecated. Named parameters and subscripted arrays can be referenced by name within an arithmetic expression without using the parameter expansion syntax. For example, ((val2 = val1 * 2)) assigns twice the value of $val1 to the parameter named val2. An internal integer representation of a named parameter can be specified with the integer builtin. Arithmetic evaluation is performed on the value of each assignment to a named parameter declared integer in this manner. Assigning a floating point number to an integer results in rounding towards zero. Likewise, floating point numbers can be declared with the float builtin; there are two types, differing only in their output format, as described for the typeset builtin. The output format can be bypassed by using arith- metic substitution instead of the parameter substitution, i.e. `${float}' uses the defined format, but `$((float))' uses a generic floating point format. Promotion of integer to floating point values is performed where necessary. In addition, if any operator which requires an integer (`&', `|', `^', `<<', `>>' and their equivalents with assignment) is given a floating point argument, it will be silently rounded towards zero except for `~' which rounds down. Users should beware that, in common with many other programming languages but not software designed for calculation, the evaluation of an expression in zsh is taken a term at a time and promotion of integers to floating point does not occur in terms only containing integers. A typical result of this is that a division such as 6/8 is truncated, in this being rounded towards 0. The FORCE_FLOAT shell option can be used in scripts or func- tions where floating point evaluation is required throughout. Scalar variables can hold integer or floating point values at different times; there is no memory of the numeric type in this case. If a variable is first assigned in a numeric context without previously be- ing declared, it will be implicitly typed as integer or float and retain that type either until the type is explicitly changed or until the end of the scope. This can have unforeseen consequences. For example, in the loop for (( f = 0; f < 1; f += 0.1 )); do # use $f done if f has not already been declared, the first assignment will cause it to be created as an integer, and consequently the operation `f += 0.1' will always cause the result to be truncated to zero, so that the loop will fail. A simple fix would be to turn the initialization into `f = 0.0'. It is therefore best to declare numeric variables with explicit types. CONDITIONAL EXPRESSIONS A conditional expression is used with the [[ compound command to test at- tributes of files and to compare strings. Each expression can be con- structed from one or more of the following unary or binary expressions: -a file true if file exists. -b file true if file exists and is a block special file. -c file true if file exists and is a character special file. -d file true if file exists and is a directory. -e file true if file exists. -f file true if file exists and is a regular file. -g file true if file exists and has its setgid bit set. -h file true if file exists and is a symbolic link. -k file true if file exists and has its sticky bit set. -n string true if length of string is non-zero. -o option true if option named option is on. option may be a single charac- ter, in which case it is a single letter option name. (See the sec- tion `Specifying Options'.) When no option named option exists, and the POSIX_BUILTINS option hasn't been set, return 3 with a warning. If that option is set, return 1 with no warning. -p file true if file exists and is a FIFO special file (named pipe). -r file true if file exists and is readable by current process. -s file true if file exists and has size greater than zero. -t fd true if file descriptor number fd is open and associated with a ter- minal device. (note: fd is not optional) -u file true if file exists and has its setuid bit set. -v varname true if shell variable varname is set. -w file true if file exists and is writable by current process. -x file true if file exists and is executable by current process. If file exists and is a directory, then the current process has permission to search in the directory. -z string true if length of string is zero. -L file true if file exists and is a symbolic link. -O file true if file exists and is owned by the effective user ID of this process. -G file true if file exists and its group matches the effective group ID of this process. -S file true if file exists and is a socket. -N file true if file exists and its access time is not newer than its modi- fication time. file1 -nt file2 true if file1 exists and is newer than file2. file1 -ot file2 true if file1 exists and is older than file2. file1 -ef file2 true if file1 and file2 exist and refer to the same file. string = pattern string == pattern true if string matches pattern. The two forms are exactly equiva- lent. The `=' form is the traditional shell syntax (and hence the only one generally used with the test and [ builtins); the `==' form provides compatibility with other sorts of computer language. string != pattern true if string does not match pattern. string =~ regexp true if string matches the regular expression regexp. If the option RE_MATCH_PCRE is set regexp is tested as a PCRE regular expression using the zsh/pcre module, else it is tested as a POSIX extended regular expression using the zsh/regex module. Upon successful match, some variables will be updated; no variables are changed if the matching fails. If the option BASH_REMATCH is not set the scalar parameter MATCH is set to the substring that matched the pattern and the integer para- meters MBEGIN and MEND to the index of the start and end, respec- tively, of the match in string, such that if string is contained in variable var the expression `${var[$MBEGIN,$MEND]}' is identical to `$MATCH'. The setting of the option KSH_ARRAYS is respected. Like- wise, the array match is set to the substrings that matched paren- thesised subexpressions and the arrays mbegin and mend to the in- dices of the start and end positions, respectively, of the sub- strings within string. The arrays are not set if there were no parenthesised subexpressions. For example, if the string `a short string' is matched against the regular expression `s(...)t', then (assuming the option KSH_ARRAYS is not set) MATCH, MBEGIN and MEND are `short', 3 and 7, respectively, while match, mbegin and mend are single entry arrays containing the strings `hor', `4' and `6', re- spectively. If the option BASH_REMATCH is set the array BASH_REMATCH is set to the substring that matched the pattern followed by the substrings that matched parenthesised subexpressions within the pattern. string1 < string2 true if string1 comes before string2 based on ASCII value of their characters. string1 > string2 true if string1 comes after string2 based on ASCII value of their characters. exp1 -eq exp2 true if exp1 is numerically equal to exp2. Note that for purely nu- meric comparisons use of the ((...)) builtin described in the sec- tion `ARITHMETIC EVALUATION' is more convenient than conditional ex- pressions. exp1 -ne exp2 true if exp1 is numerically not equal to exp2. exp1 -lt exp2 true if exp1 is numerically less than exp2. exp1 -gt exp2 true if exp1 is numerically greater than exp2. exp1 -le exp2 true if exp1 is numerically less than or equal to exp2. exp1 -ge exp2 true if exp1 is numerically greater than or equal to exp2. ( exp ) true if exp is true. ! exp true if exp is false. exp1 && exp2 true if exp1 and exp2 are both true. exp1 || exp2 true if either exp1 or exp2 is true. For compatibility, if there is a single argument that is not syntactically significant, typically a variable, the condition is treated as a test for whether the expression expands as a string of non-zero length. In other words, [[ $var ]] is the same as [[ -n $var ]]. It is recommended that the second, explicit, form be used where possible. Normal shell expansion is performed on the file, string and pattern argu- ments, but the result of each expansion is constrained to be a single word, similar to the effect of double quotes. Filename generation is not performed on any form of argument to conditions. However, it can be forced in any case where normal shell expansion is valid and when the option EXTENDED_GLOB is in effect by using an explicit glob qualifier of the form (#q) at the end of the string. A normal glob quali- fier expression may appear between the `q' and the closing parenthesis; if none appears the expression has no effect beyond causing filename genera- tion. The results of filename generation are joined together to form a single word, as with the results of other forms of expansion. This special use of filename generation is only available with the [[ syn- tax. If the condition occurs within the [ or test builtin commands then globbing occurs instead as part of normal command line expansion before the condition is evaluated. In this case it may generate multiple words which are likely to confuse the syntax of the test command. For example, [[ -n file*(#qN) ]] produces status zero if and only if there is at least one file in the cur- rent directory beginning with the string `file'. The globbing qualifier N ensures that the expression is empty if there is no matching file. Pattern metacharacters are active for the pattern arguments; the patterns are the same as those used for filename generation, see zshexpn(1), but there is no special behaviour of `/' nor initial dots, and no glob quali- fiers are allowed. In each of the above expressions, if file is of the form `/dev/fd/n', where n is an integer, then the test applied to the open file whose descriptor number is n, even if the underlying system does not support the /dev/fd di- rectory. In the forms which do numeric comparison, the expressions exp undergo arithmetic expansion as if they were enclosed in $((...)). For example, the following: [[ ( -f foo || -f bar ) && $report = y* ]] && print File exists. tests if either file foo or file bar exists, and if so, if the value of the parameter report begins with `y'; if the complete condition is true, the message `File exists.' is printed. EXPANSION OF PROMPT SEQUENCES Prompt sequences undergo a special form of expansion. This type of expan- sion is also available using the -P option to the print builtin. If the PROMPT_SUBST option is set, the prompt string is first subjected to parameter expansion, command substitution and arithmetic expansion. See zshexpn(1). Certain escape sequences may be recognised in the prompt string. If the PROMPT_BANG option is set, a `!' in the prompt is replaced by the current history event number. A literal `!' may then be represented as `!!'. If the PROMPT_PERCENT option is set, certain escape sequences that start with `%' are expanded. Many escapes are followed by a single character, although some of these take an optional integer argument that should appear between the `%' and the next character of the sequence. More complicated escape sequences are available to provide conditional expansion. SIMPLE PROMPT ESCAPES Special characters %% A `%'. %) A `)'. Login information %l The line (tty) the user is logged in on, without `/dev/' prefix. If the name starts with `/dev/tty', that prefix is stripped. %M The full machine hostname. %m The hostname up to the first `.'. An integer may follow the `%' to specify how many components of the hostname are desired. With a negative integer, trailing components of the hostname are shown. %n $USERNAME. %y The line (tty) the user is logged in on, without `/dev/' prefix. This does not treat `/dev/tty' names specially. Shell state %# A `#' if the shell is running with privileges, a `%' if not. Equiv- alent to `%(!.#.%%)'. The definition of `privileged', for these purposes, is that either the effective user ID is zero, or, if POSIX.1e capabilities are supported, that at least one capability is raised in either the Effective or Inheritable capability vectors. %? The return status of the last command executed just before the prompt. %_ The status of the parser, i.e. the shell constructs (like `if' and `for') that have been started on the command line. If given an inte- ger number that many strings will be printed; zero or negative or no integer means print as many as there are. This is most useful in prompts PS2 for continuation lines and PS4 for debugging with the XTRACE option; in the latter case it will also work non-interac- tively. %^ The status of the parser in reverse. This is the same as `%_' other than the order of strings. It is often used in RPS2. %d %/ Current working directory. If an integer follows the `%', it speci- fies a number of trailing components of the current working direc- tory to show; zero means the whole path. A negative integer speci- fies leading components, i.e. %-1d specifies the first component. %~ As %d and %/, but if the current working directory starts with $HOME, that part is replaced by a `~'. Furthermore, if it has a named directory as its prefix, that part is replaced by a `~' fol- lowed by the name of the directory, but only if the result is shorter than the full path; see Dynamic and Static named directories in zshexpn(1). %e Evaluation depth of the current sourced file, shell function, or eval. This is incremented or decremented every time the value of %N is set or reverted to a previous value, respectively. This is most useful for debugging as part of $PS4. %h %! Current history event number. %i The line number currently being executed in the script, sourced file, or shell function given by %N. This is most useful for debug- ging as part of $PS4. %I The line number currently being executed in the file %x. This is similar to %i, but the line number is always a line number in the file where the code was defined, even if the code is a shell func- tion. %j The number of jobs. %L The current value of $SHLVL. %N The name of the script, sourced file, or shell function that zsh is currently executing, whichever was started most recently. If there is none, this is equivalent to the parameter $0. An integer may follow the `%' to specify a number of trailing path components to show; zero means the full path. A negative integer specifies lead- ing components. %x The name of the file containing the source code currently being exe- cuted. This behaves as %N except that function and eval command names are not shown, instead the file where they were defined. %c %. %C Trailing component of the current working directory. An integer may follow the `%' to get more than one component. Unless `%C' is used, tilde contraction is performed first. These are deprecated as %c and %C are equivalent to %1~ and %1/, respectively, while explicit positive integers have the same effect as for the latter two se- quences. Date and time %D The date in yy-mm-dd format. %T Current time of day, in 24-hour format. %t %@ Current time of day, in 12-hour, am/pm format. %* Current time of day in 24-hour format, with seconds. %w The date in day-dd format. %W The date in mm/dd/yy format. %D{string} string is formatted using the strftime function. See strftime(3) for more details. Various zsh extensions provide numbers with no leading zero or space if the number is a single digit: %f a day of the month %K the hour of the day on the 24-hour clock %L the hour of the day on the 12-hour clock In addition, if the system supports the POSIX gettimeofday system call, %. provides decimal fractions of a second since the epoch with leading zeroes. By default three decimal places are provided, but a number of digits up to 9 may be given following the %; hence %6. outputs microseconds, and %9. outputs nanoseconds. (The latter re- quires a nanosecond-precision clock_gettime; systems lacking this will return a value multiplied by the appropriate power of 10.) A typical example of this is the format `%D{%H:%M:%S.%.}'. The GNU extension %N is handled as a synonym for %9.. Additionally, the GNU extension that a `-' between the % and the format character causes a leading zero or space to be stripped is handled directly by the shell for the format characters d, f, H, k, l, m, M, S and y; any other format characters are provided to the system's strftime(3) with any leading `-' present, so the handling is system dependent. Further GNU (or other) extensions are also passed to strftime(3) and may work if the system supports them. Visual effects %B (%b) Start (stop) boldface mode. %E Clear to end of line. %U (%u) Start (stop) underline mode. %S (%s) Start (stop) standout mode. %F (%f) Start (stop) using a different foreground colour, if supported by the terminal. The colour may be specified two ways: either as a nu- meric argument, as normal, or by a sequence in braces following the %F, for example %F{red}. In the latter case the values allowed are as described for the fg zle_highlight attribute; see Character High- lighting in zshzle(1). This means that numeric colours are allowed in the second format also. %K (%k) Start (stop) using a different bacKground colour. The syntax is identical to that for %F and %f. %{...%} Include a string as a literal escape sequence. The string within the braces should not change the cursor position. Brace pairs can nest. A positive numeric argument between the % and the { is treated as described for %G below. %G Within a %{...%} sequence, include a `glitch': that is, assume that a single character width will be output. This is useful when out- putting characters that otherwise cannot be correctly handled by the shell, such as the alternate character set on some terminals. The characters in question can be included within a %{...%} sequence to- gether with the appropriate number of %G sequences to indicate the correct width. An integer between the `%' and `G' indicates a char- acter width other than one. Hence %{seq%2G%} outputs seq and as- sumes it takes up the width of two standard characters. Multiple uses of %G accumulate in the obvious fashion; the position of the %G is unimportant. Negative integers are not handled. Note that when prompt truncation is in use it is advisable to divide up output into single characters within each %{...%} group so that the correct truncation point can be found. CONDITIONAL SUBSTRINGS IN PROMPTS %v The value of the first element of the psvar array parameter. Fol- lowing the `%' with an integer gives that element of the array. Negative integers count from the end of the array. %(x.true-text.false-text) Specifies a ternary expression. The character following the x is arbitrary; the same character is used to separate the text for the `true' result from that for the `false' result. This separator may not appear in the true-text, except as part of a %-escape sequence. A `)' may appear in the false-text as `%)'. true-text and false-text may both contain arbitrarily-nested escape sequences, in- cluding further ternary expressions. The left parenthesis may be preceded or followed by a positive inte- ger n, which defaults to zero. A negative integer will be multi- plied by -1, except as noted below for `l'. The test character x may be any of the following: ! True if the shell is running with privileges. # True if the effective uid of the current process is n. ? True if the exit status of the last command was n. _ True if at least n shell constructs were started. C / True if the current absolute path has at least n elements relative to the root directory, hence / is counted as 0 ele- ments. c . ~ True if the current path, with prefix replacement, has at least n elements relative to the root directory, hence / is counted as 0 elements. D True if the month is equal to n (January = 0). d True if the day of the month is equal to n. e True if the evaluation depth is at least n. g True if the effective gid of the current process is n. j True if the number of jobs is at least n. L True if the SHLVL parameter is at least n. l True if at least n characters have already been printed on the current line. When n is negative, true if at least abs(n) characters remain before the opposite margin (thus the left margin for RPROMPT). S True if the SECONDS parameter is at least n. T True if the time in hours is equal to n. t True if the time in minutes is equal to n. v True if the array psvar has at least n elements. V True if element n of the array psvar is set and non-empty. w True if the day of the week is equal to n (Sunday = 0). %<string< %>string> %[xstring] Specifies truncation behaviour for the remainder of the prompt string. The third, deprecated, form is equivalent to `%xstringx', i.e. x may be `<' or `>'. The string will be displayed in place of the truncated portion of any string; note this does not undergo prompt expansion. The numeric argument, which in the third form may appear immediately after the `[', specifies the maximum permitted length of the various strings that can be displayed in the prompt. In the first two forms, this numeric argument may be negative, in which case the truncation length is determined by subtracting the absolute value of the numeric argument from the number of character positions remain- ing on the current prompt line. If this results in a zero or nega- tive length, a length of 1 is used. In other words, a negative ar- gument arranges that after truncation at least n characters remain before the right margin (left margin for RPROMPT). The forms with `<' truncate at the left of the string, and the forms with `>' truncate at the right of the string. For example, if the current directory is `/home/pike', the prompt `%8<..<%/' will expand to `..e/pike'. In this string, the terminating character (`<', `>' or `]'), or in fact any character, may be quoted by a preceding `\'; note when using print -P, however, that this must be doubled as the string is also subject to standard print processing, in addition to any backslashes removed by a double quoted string: the worst case is therefore `print -P "%<\\\\<<..."'. If the string is longer than the specified truncation length, it will appear in full, completely replacing the truncated string. The part of the prompt string to be truncated runs to the end of the string, or to the end of the next enclosing group of the `%(' con- struct, or to the next truncation encountered at the same grouping level (i.e. truncations inside a `%(' are separate), which ever comes first. In particular, a truncation with argument zero (e.g., `%<<') marks the end of the range of the string to be truncated while turning off truncation from there on. For example, the prompt `%10<...<%~%<<%# ' will print a truncated representation of the cur- rent directory, followed by a `%' or `#', followed by a space. Without the `%<<', those two characters would be included in the string to be truncated. Note that `%-0<<' is not equivalent to `%<<' but specifies that the prompt is truncated at the right mar- gin. Truncation applies only within each individual line of the prompt, as delimited by embedded newlines (if any). If the total length of any line of the prompt after truncation is greater than the terminal width, or if the part to be truncated contains embedded newlines, truncation behavior is undefined and may change in a future version of the shell. Use `%-n(l.true-text.false-text)' to remove parts of the prompt when the available space is less than n. zsh 5.9 May 14, 2022 ZSHMISC(1)
NAME | SIMPLE COMMANDS & PIPELINES | PRECOMMAND MODIFIERS | COMPLEX COMMANDS | ALTERNATE FORMS FOR COMPLEX COMMANDS | RESERVED WORDS | ERRORS | COMMENTS | ALIASING | QUOTING | REDIRECTION | OPENING FILE DESCRIPTORS USING PARAMETERS | MULTIOS | REDIRECTIONS WITH NO COMMAND | COMMAND EXECUTION | FUNCTIONS | AUTOLOADING FUNCTIONS | ANONYMOUS FUNCTIONS | SPECIAL FUNCTIONS | JOBS | SIGNALS | ARITHMETIC EVALUATION | CONDITIONAL EXPRESSIONS | EXPANSION OF PROMPT SEQUENCES | SIMPLE PROMPT ESCAPES | CONDITIONAL SUBSTRINGS IN PROMPTS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=zshmisc&sektion=1&manpath=FreeBSD+15.1-RELEASE+and+Ports>