FreeBSD Manual Pages
CP2112(4) Kernel Interfaces Manual CP2112(4) NAME cp2112 -- driver for a USB GPIO and I2C peripheral device SYNOPSIS To compile this driver into the kernel, place the following lines in your kernel configuration file: device cp2112 device usb device gpio device iicbus Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5): cp2112_load="YES" DESCRIPTION The cp2112 driver provides support for Silicon Labs CP2112 device. The de- vice has 8 general purpose I/O pins and an I2C controller that supports a subset of the I2C protocol. All pins support both input and output modes. An output pin can be config- ured either for open-drain or push-pull operation. Pins 0, 1 and 7 support special functions: I2C transmit indication, I2C receive indication and clock output respectively. At the moment the cp2112 driver does not pro- vide a way to enable and configure the special functions. The I2C controller supports read transactions with up to 512 bytes of data, write transactions with up to 61 bytes of data and a write followed by the repeated start followed by a read transactions where the write can be up to 16 bytes and the read can be up to 512 bytes. Zero length transfers are not supported. The cp2112 driver creates a gpio(4) and iicbus(4) child buses to expose the respective functions. SEE ALSO gpio(4), iicbus(4), usb(4) HISTORY The cp2112 driver and this manual page was written by Andriy Gapon <avg@FreeBSD.org>. FreeBSD ports 15.quarterly August 12, 2020 CP2112(4)
NAME | SYNOPSIS | DESCRIPTION | SEE ALSO | HISTORY
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=cp2112&sektion=4&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>