FreeBSD Manual Pages
LIBGEOM(3) Library Functions Manual LIBGEOM(3) NAME geom_stats_open, geom_stats_close, geom_stats_resync, geom_stats_snapshot_get, geom_stats_snapshot_free, geom_stats_snapshot_timestamp, geom_stats_snapshot_reset, geom_stats_snapshot_next, gctl_get_handle, gctl_ro_param, gctl_rw_param, gctl_issue, gctl_free, gctl_dump, geom_getxml, geom_xml2tree, geom_gettree, geom_deletetree, g_open, g_close, g_mediasize, g_sectorsize, g_stripeoffset, g_stripesize, g_flush, g_delete, g_device_path, g_get_ident, g_get_name, g_open_by_ident, g_providername -- userland API library for kernel GEOM subsystem LIBRARY Userland API Library for kernel GEOM subsystem (libgeom, -lgeom) SYNOPSIS /* stdio.h is only required for `gctl_dump` */ #include <stdio.h> #include <libgeom.h> Statistics Functions void geom_stats_close(void); int geom_stats_open(void); void geom_stats_resync(void); void * geom_stats_snapshot_get(void); void geom_stats_snapshot_free(void *arg); void geom_stats_snapshot_timestamp(void *arg, struct timespec *tp); void geom_stats_snapshot_reset(void *arg); struct devstat * geom_stats_snapshot_next(void *arg); Control Functions struct gctl_req * gctl_get_handle(void); void gctl_ro_param(struct gctl_req *req, const char *name, int len, const void *value); void gctl_rw_param(struct gctl_req *req, const char *name, int len, void *value); const char * gctl_issue(struct gctl_req *req); void gctl_free(struct gctl_req *req); void gctl_dump(struct gctl_req *req, FILE *f); Utility Functions char * geom_getxml(void); int geom_xml2tree(struct gmesh *gmp, char *p); int geom_gettree(struct gmesh *gmp); void geom_deletetree(struct gmesh *gmp); int g_open(const char *name, int dowrite); int g_close(int fd); off_t g_mediasize(int fd); ssize_t g_sectorsize(int fd); ssize_t g_stripeoffset(int fd); ssize_t g_stripesize(int fd); int g_flush(int fd); int g_delete(int fd, off_t offset, off_t length); char * g_device_path(const char *devpath); int g_get_ident(int fd, char *ident, size_t size); int g_get_name(const char *ident, char *name, size_t size); int g_open_by_ident(const char *ident, int dowrite, char *name, size_t size); char * g_providername(int fd); DESCRIPTION The geom library contains the official and publicized API for interacting with the GEOM subsystem in the kernel. Statistics Functions GEOM collects statistics data for all consumers and providers, but does not perform any normalization or presentation on the raw data, this is left as an exercise for user-land presentation utilities. The geom_stats_open() and geom_stats_close() functions open and close the necessary pathways to access the raw statistics information in the kernel. These functions are likely to open one or more files and cache the file de- scriptors locally. The geom_stats_open() function returns zero on success, and sets errno if not. The geom_stats_resync() function will check if more statistics collection points have been added in the kernel since geom_stats_open() or the previ- ous call to geom_stats_resync(). The geom_stats_snapshot_get() function will acquire a snapshot of the raw data from the kernel, and while a reasonable effort is made to make this snapshot as atomic and consistent as possible, no guarantee is given that it will actually be so. The snapshot must be freed again using the geom_stats_snapshot_free() function. The geom_stats_snapshot_get() func- tion returns NULL on failure. The geom_stats_snapshot_timestamp() function provides access to the time- stamp acquired in the snapshot. The geom_stats_snapshot_reset() and geom_stats_snapshot_next() functions provide an iterator over the statistics slots in the snapshot. The geom_stats_snapshot_reset() function forces the internal pointer in the snapshot back to before the first item. The geom_stats_snapshot_next() function returns the next item, and NULL if there are no more items in the snapshot. Control Functions The gctl_*() functions are used to send requests to GEOM classes. In order for a GEOM class to actually be able to receive these requests, it must have defined a "ctlreq" method. A struct gctl_req *, obtained with gctl_get_handle(), can hold any number of parameters, which must be added to it with gctl_ro_param() (for read- only parameters) or gctl_rw_param() (for read/write parameters). Both gctl_ro_param() and gctl_rw_param() take a string name, which is used to identify the parameter, and a value, which contains, in the read-only case, the data to be passed to the GEOM class, or, in the read/write case, a pointer to preallocated memory that the GEOM class should fill with the desired data. If len is negative, it is assumed that value is an ASCII string and the actual length is taken from the string length of value; oth- erwise it must hold the size of value. A parameter with a name containing the string "class" is mandatory for each request, and the corresponding value must hold the name of the GEOM class where the request should be sent to. Also mandatory for each request is a parameter with a name called "verb", and the corresponding value needs to hold the command string that the GEOM class should react upon. Once all desired parameters are filled in, the request must be sent to the GEOM subsystem with gctl_issue(), which returns NULL on success, or a string containing the error message on failure. After the request is finished, the allocated memory should be released with gctl_free(). The gctl_dump() function can be used to format the contents of req to the open file handle pointed to by f, for debugging purposes. Error handling for the control functions is postponed until the call to gctl_issue(), which returns NULL on success, or an error message corre- sponding to the first error which happened. Utility Functions The geom_getxml() function is a wrapper around sysctl(3) that fetches the kern.geom.confxml OID, and returns it's value. The allocated memory should be released with free(3) after use. The geom_xml2tree() function parses the XML representation of a GEOM topol- ogy passed as p, allocates the needed data structures to access this infor- mation and fills in the passed gmp data structure. Memory allocated during this transformation should be released using geom_deletetree() after use. The geom_gettree() function is a wrapper around the geom_getxml() and geom_xml2tree() functions. Memory allocated during this operation should be released using geom_deletetree() after use. The geom_deletetree() function releases memory allocated for storing the data-structures referenced by gmp. The g_*() functions are used to communicate with GEOM providers. The g_open() function opens the given provider and returns file descriptor number, which can be used with other functions. The dowrite argument indi- cates if operations that modify the provider (like g_flush() or g_delete()) are going to be called. The g_close() function closes the provider. The g_mediasize() function returns size of the given provider. The g_sectorsize() function returns sector size of the given provider. The g_stripeoffset() function returns stripe offset of the given provider. The g_stripesize() function returns stripe size of the given provider. The g_flush() function sends BIO_FLUSH request to flush write cache of the provider. The g_delete() function tells the provider that the given data range is no longer used. The g_device_path() function returns the full path to a provider given a partial or full path to the device node. NULL is returned if the device cannot be found or is not a valid geom provider. The g_get_ident() function returns provider's fixed and unique identifier. The ident argument should be at least DISK_IDENT_SIZE big. The g_get_name() function returns name of the provider, which identifier is equal to the ident string. The g_open_by_ident() function opens provider using its identification, un- like g_open() which uses the provider's name. The function will store the provider's name in the name parameter if it is not NULL. The g_providername() function returns the provider name of an open file de- scriptor. NULL is returned the file descriptor does not point to a valid geom provider. All functions except g_providername() and g_device_path() return a value greater than or equal to 0 on success or -1 on failure. EXAMPLES Create a request that is to be sent to the CCD class, and tell it to de- stroy a specific geom: H = gctl_get_handle(); gctl_ro_param(H, "verb", -1, "destroy geom"); gctl_ro_param(H, "class", -1, "CCD"); sprintf(buf, "ccd%d", ccd); gctl_ro_param(H, "geom", -1, buf); errstr = gctl_issue(H); if (errstr != NULL) err(1, "could not destroy ccd: %s", errstr); gctl_free(H); HISTORY The geom library appeared in FreeBSD 5.1. AUTHORS Poul-Henning Kamp <phk@FreeBSD.org> Lukas Ertl <le@FreeBSD.org> Pawel Jakub Dawidek <pjd@FreeBSD.org> FreeBSD ports 15.quarterly October 16, 2017 LIBGEOM(3)
NAME | LIBRARY | SYNOPSIS | DESCRIPTION | EXAMPLES | HISTORY | AUTHORS
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=libgeom&sektion=3&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>