Skip site navigation (1)Skip section navigation (2)

FreeBSD Manual Pages

  
 
  

home | help
RTW89(4)		    Kernel Interfaces Manual		      RTW89(4)

NAME
       rtw89 --	Realtek	IEEE 802.11ax wireless network driver

SYNOPSIS
       The   driver   will   auto-load	without	 any  user  interaction	 using
       devmatch(8) if enabled in rc.conf(5).

       Only if auto-loading is explicitly disabled, place the following	 lines
       in rc.conf(5) to	manually load the driver as a module at	boot time:

	     kld_list="${kld_list} if_rtw89"

       It is not possible to load the driver from loader(8).

DESCRIPTION
       The  rtw89 driver is derived from Realtek's Linux rtw89 driver based on
       Linux version 7.0.

       This driver requires firmware to	be loaded before it  will  work.   The
       package		 wifi-firmware-rtw89-kmod	    from	   the
       ports/net/wifi-firmware-rtw89-kmod port needs to	 be  installed	before
       the  driver  is	loaded.	 Otherwise no wlan(4) interface	can be created
       using ifconfig(8).  One should use  fwget(8)  to	 install  the  correct
       firmware	package.

       The  driver  uses the linuxkpi_wlan(4) and linuxkpi(4) compat framework
       to bridge between the Linux and native FreeBSD driver code as  well  as
       to the native net80211(4) wireless stack.

HARDWARE
       The rtw89 driver	supports PCIe devices with the following chipsets:

	     	 Realtek 8851BE	Wi-Fi 6	 (RTL8851BE)
	     	 Realtek 8852AE	Wi-Fi 6	 (RTL8852AE)
	     	 Realtek 8852BE	Wi-Fi 6	 (RTL8852BE)
	     	 Realtek 8852BTE Wi-Fi 6 (RTL8852BE-VT)
	     	 Realtek 8852CE	Wi-Fi 6E (RTL8852CE)
	     	 Realtek 8922AE	Wi-Fi 7	 (RTL8922AE)

LOADER TUNABLES
       compat.linuxkpi.skb.mem_limit
	       If  you	are  running a 64bit system with more than 4GB of main
	       memory you need to set this tunable to 1	in loader.conf(5)  and
	       reboot  once  to	 make  it  effective.	This tunable will work
	       around a	problem	with DMA and  limit  allocations  for  network
	       buffer  memory  to  the lower 32bit of physical memory and make
	       the driver work.

SEE ALSO
       linuxkpi(4,)  linuxkpi_wlan(4,)	 wlan(4),   networking(7),   fwget(8),
       ifconfig(8), wpa_supplicant(8)

HISTORY
       The rtw89 driver	first appeared in FreeBSD 14.2.

BUGS
       Certainly.

       Does not	seem to	work (reliably)	on machines with more than 4GB of main
       memory.	See in the "LOADER TUNABLES" section above.

       We  observe  various  stability issues leading up to driver crashes and
       kernel panics with the current set of chipsets at least in  combination
       with linuxkpi_wlan(4).

       While  rtw89 supports 802.11a/b/g/n/ac/ax modes,	the compatibility code
       currently only supports 802.11a/b/g modes.  Support  for	 802.11n/ac/ax
       is yet to come.

FreeBSD	ports 15.quarterly	 May 15, 2026			      RTW89(4)

Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=rtw89&sektion=4&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>

home | help