vfs(n) Tcl-only Virtual File Systems vfs(n) NAME ::vfs - Commands and Procedures to create virtual filesystems SYNOPSIS package require Tcl 8.4 package require vfs ?1.2.1? vfs::filesystem info vfs::filesystem mount vfs::filesystem unmount vfs::accessMode mode vfs::matchDirectories types vfs::matchFiles types vfs::matchCorrectTypes types filelist ?inDir? DESCRIPTION The ::vfs package provides commands to query, mount and unmount virtual filesystems, and provides as Tcl libraries some facilities for helping the writing of new virtual filesystems in Tcl. Once a virtual filesystem is in place, the standard Tcl file, glob, cd, pwd, open commands, including all their C APIs in the Tcl library (e.g. Tcl_FSOpenFileChannel, Tcl_FS- MatchInDirectory,...), can be used within the filesystem (and indeed, prop- erly written extensions such as Tk which may open or read files will also transparently access the virtual filesystem). Because all of Tcl's FS ac- tivity passes through a single layer, it can all be intercepted. This package does just that. Notice that this is quite different to overloading the file command in Tcl. We are actually providing vfs replacements for C commands like access, stat. By implementing just a handful of commands at this low level, we ensure that all commands at higher levels function irre- spective of what is going on inside the FS layer. Tcl's filesystem hooks operate on a per-process basis. This means every Tcl interpreter in the same process/application sees the same filesystem, including any virtual filesystems. The package require vfs command should be used to access this library. It automatically registers the vfs hooks into Tcl's filesystem, and these will not be removed until Tcl exits (if desired, control over this could be ex- posed to Tcl in the future). However, the vfs package will at that stage not have any new filesystems mounted, so it will have little effect. Note that package require vfs has two effects. First of all, when it is issued in any Tcl interpreter it will ensure the vfs hooks have been registered with Tcl's core just once (and if any of those interpreters are later deleted, the vfs hooks will still remain registered - they remain until Tcl exits). The second effect is to provide the command vfs::filesystem which allows the interpreter to intercept filesystem commands and handle them with Tcl code in that interpreter. There are three somewhat unsupported subcommands of vfs::filesystem, fully- normalize path, posixerror int, internalerror ?script?, which are used to normalize a path (including any final symlink), to register a posix error code with a Tcl error, and to trap/report internal errors in tclvfs imple- mentations respectively. vfs::filesystem mount ?-volume? path command To use a virtual filesystem, it must be 'mounted'. Mounting in- volves declaring to the vfs package that any subdirectories of a given path in the filesystem should be handled by the given command which should be a Tcl command or procedure in the interpreter in which the vfs::filesystem is executed. If the ?-volume? flag is given, the given mount point is also registered with Tcl as a new volume (like a new drive which will appear in file volumes). This is useful (and required for reasonable operation) for mounts like ftp://. For paths mounted inside the native filesystem, it should of course not be given. The new filesystem mounts will be observed immediately in all interpreters in the current process. If the in- terpreter is later deleted, all mounts which are intercepted by it will be automatically removed (and will therefore affect the view of the filesystem seen by all interpreters). vfs::filesystem unmount path This unmounts the virtual filesystem which was mounted at path (hence removing it from Tcl's filesystem), or throws an error if no filesystem was mounted there. vfs::filesystem info ?path? If no arguments are given, this returns a list of all filesystems mounted (in all interpreters). If a path argument is given, then the command to be used for that path is returned, or an error is thrown if no vfs is mounted for that path. There is currently no facility for examining in which interpreter each command will be evaluated. vfs::filesystem fullynormalize path Performs a full expansion of path, (as per 'file normalize'), but including following any links in the last element of path. IMPLEMENTING A TCL ONLY VFS The vfs package will intercept every filesystem operation which falls within a given mount point, and pass the operation on to the mount point's command in the interpreter which registered it. In general this occurs by the C equivalent of an evaluation like this: eval $command [list $subcmd $root $relative $actualpath] $args. Here subcmd may be any of the following: access, createdirectory, delete- file, fileattributes, matchindirectory, open, removedirectory, stat, utime. If command takes appropriate action for each of these cases, a complete, perfect virtual filesystem will be achieved, indistinguishable to Tcl from the native filesystem. (CAVEATS: right now I don't expose to Tcl all the permission-related flags of 'glob'). The remaining arguments specify a file path on which to operate (all com- mands operate on one of these), and any additional arguments which may be required to carry out the action. The file path is specified by three ar- guments: root is the part of the path which lies outside this filesystem's mount point, relative is the part of the path which lies inside this filesytem, and actualpath is the original (unnormalized) name of the path which was used in the current command wherever it originated (in Tcl or C). For example, if C:/foo/bar/mount.zip/xxx/yyy is a path in your filesystem, where mount.zip is a zip archive which has been mounted (on top of itself) and contains xxx/yyy, and the current working directory is inside xxx, and we evaluate a command like file exists yyy, then roote C:/foo/bar/mount.zip, relative will be xxx/yyy, and actualpath will be yyy. The file separator between the root and relative is omitted. Note that most filesystem operations will only require the relative argu- ment to work correctly, but the other arguments are actually required for correct operation of some subcommands. Almost all of these commands should either return correctly (i.e. with a TCL_OK result at the C level) or they should use vfs::filesystem posixerror to signal the appropriate posix error code. If a Tcl error is thrown, that should be considered a bug, but it will be interpreted as an unknown posix error in the filesystem call. The exceptions to these rules are those filesystem commands which are able to specify a Tcl error message directly: open (when an interpreter is given), matchindirectory and fileattributes (for a set or get operation only). These three commands are allowed to throw any Tcl error message which will be passed along to the caller, or they may throw a posix error which will be handled appropriately. The actual commands are as follows (where r-r-a represents the standard ar- gument triplet of root, relative and actualpath): command access r-r-a mode Return TCL_OK or throw a posix error depending on whether the given access mode (which is an integer) is compatible with the file. command createdirectory r-r-a Create a directory with the given name. The command can assume that all sub-directories in the path exist and are valid, and that the actual desired path does not yet exist (Tcl takes care of all of that for us). command deletefile r-r-a Delete the given file. command fileattributes r-r-a ?index? ?value? If neither index nor value is given, then return a list of all ac- ceptable attribute names. If index is given, but no value, then re- trieve the value of the index'th attribute (counting in order over the list returned when no argument is given) for the given file. If a value is also given then set the index'th attribute of the given file to that value. command matchindirectory r-r-a pattern types Return the list of files or directories in the given path (which is always the name of an existing directory), which match the pattern and are compatible with the types given. It is very important that the command correctly handle types requests for directories only (and files only), because to handle any kind of recursive globbing, Tcl will actually generate requests for directory-only matches from the filesystem. See vfs::matchDirectories below for help. command open r-r-a mode permissions For this command, mode is any of "r", "w", "a", "w+", "a+". If the open involves creating a file, then permissions dictates what modes to create it with. If the open operation was not successful, an er- ror should be thrown. If the open operation is successful, the com- mand should return a list of either one or two items. The first item (which is obligatory) is the name of the channel which has been created. The second item, if given, is a Tcl-callback to be used when the channel is closed, so that the vfs can clean up as appro- priate. This callback will be evaluated by Tcl just before the channel is closed. The channel will still exist, and all available data will have been flushed into it. The callback can, for example, seek to the beginning of the channel, read its contents and store that contents elsewhere (e.g. compressed or on a remote ftp site, etc). The return code or any errors returned by the callback are ignored (if the callback wishes to signal an error, it must do so asycnhronously, with bgerror, for example), unless the 'internaler- ror' script has been specified, when they are passed to that script for further action. command removedirectory r-r-a recursive Delete the given directory. recursive is either 0 or 1. If it is 1 then even if the directory is non-empty, an attempt should be made to recursively delete it and its contents. If it is 0 and the di- rectory is non-empty, a posix error (EEXIST) should be thrown. command stat r-r-a Return a list of even length containing field-name and value pairs for the contents of a stat structure. The order is not important. The option names are dev (long), ino (long), mode (int), nlink (long), uid (long), gid (long), size (long), atime (long), mtime (long), ctime (long), type (string which is either "directory" or "file"), where the type of each argument is given in brackets. The procedure should therefore return with something like return [list dev 0 type file mtime 1234 ...]. command utime r-r-a actime mtime Set the access and modification times of the given file (these are read with 'stat'). VFS HELPERS The vfslib provides a number of Tcl procedures which can help with writing command procedures to handle the above possibilities. These are: vfs::accessMode mode converts an integer access mode to a somewhat more preferable string, any of F X W XW R RX RW. vfs::matchDirectories types Does types want directories included? vfs::matchFiles types Does types want files included? vfs::matchCorrectTypes types filelist ?inDir? Returns that subset of the filelist (which are either absolute paths or names of files in inDir) which are compatible with the types given. VFS DEBUGGING Use something like this to debug problems in your implementation: vfs::filesystem internalerror report ; proc report {} { puts stderr $::er- rorInfo } LIMITATIONS There are very few limitations to the vfs code. One subtlety that you may encounter is if you mount a case-sensitive virtual filesystem into a case- insensitive system (e.g. the standard Windows or MacOS fs) and your code relies on case-insensitivity, then it will not run properly in the virtual filesystem. Of course if your code relies on case-insensitivity, it wouldn't run under Tcl on Unix either, so the best solution is to fix your code! We may add link and lstat commands in the future to allow virtual filesys- tems to support reading and writing links - this is supported by the C API, but has simply not been exposed to Tcl in this extension, yet. The Tcl 'Tcl_FSMatchInDirectory' function takes a variety of type informa- tion in a Tcl_GlobTypeData structure. We currently only expose the 'type' field from that structure (so the 'permissions' and MacOS type/creator fields are ignored). KEYWORDS vfs, filesystem, file Vfs 1.2.1 vfs(n)
NAME | SYNOPSIS | DESCRIPTION | IMPLEMENTING A TCL ONLY VFS | VFS HELPERS | VFS DEBUGGING | LIMITATIONS | KEYWORDS
Want to link to this manual page? Use this URL:
<https://man.FreeBSD.org/cgi/man.cgi?query=vfs&sektion=&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>