FreeBSD Manual Pages
ZPOOL-SCRUB(8) System Manager's Manual ZPOOL-SCRUB(8) NAME zpool-scrub -- begin or resume scrub of ZFS storage pools SYNOPSIS zpool scrub [-e |-p | -s| -C][-w] [-S date] [-E date] -a|poola| DESCRIPTION Begins a scrub or resumes a paused scrub. The scrub examines all data in the specified pools to verify that it checksums correctly. For replicated (mirror, raidz, or draid) devices, ZFS automatically repairs any damage discovered during the scrub. The zpool status command reports the progress of the scrub and summarizes the results of the scrub upon completion. Scrubbing and resilvering are very similar operations. The difference is that resilvering only examines data that ZFS knows to be out of date (for example, when attaching a new device to a mirror or replacing an existing device), whereas scrubbing examines all data to discover silent errors due to hardware faults or disk failure. When scrubbing a pool with encrypted filesystems the keys do not need to be loaded. However, if the keys are not loaded and an unrepairable checksum error is detected the file name cannot be included in the zpool status -v verbose error report. Because scrubbing and resilvering are I/O-intensive operations, ZFS only allows one at a time. A scrub is split into two parts: metadata scanning and block scrubbing. The metadata scanning sorts blocks into large sequential ranges which can then be read much more efficiently from disk when issuing the scrub I/O. If a scrub is paused, the zpool scrub resumes it. If a resilver is in progress, ZFS does not allow a scrub to be started until the resilver com- pletes. Note that, due to changes in pool data on a live system, it is possible for scrubs to progress slightly beyond 100% completion. During this period, no completion time estimate will be provided. OPTIONS -a, --all Begin, pause, stop scrub on all pools. Initiating scrubs on multiple pools can put considerable load and memory pressure on the system, so this operation should be performed with caution. -s Stop scrubbing. -p Pause scrubbing. Scrub pause state and progress are periodically synced to disk. If the system is restarted or pool is exported during a paused scrub, even after import, scrub will remain paused until it is resumed. Once resumed the scrub will pick up from the place where it was last checkpointed to disk. To resume a paused scrub issue zpool scrub or zpool scrub -e again. -w Wait until scrub has completed before returning. -e Only scrub files with known data errors as reported by zpool status -v. The pool must have been scrubbed at least once with the head_errlog feature enabled to use this option. Error scrubbing cannot be run si- multaneously with regular scrubbing or resilvering, nor can it be run when a regular scrub is paused. -C Continue scrub from last saved txg (see zpool last_scrubbed_txg prop- erty). -S date, -E date Allows specifying the date range for blocks created between these dates. * -S Defines a start date. If not specified, scrubbing begins from the start of the pool's existence. * -E Defines an end date. If not specified, scrubbing contin- ues up to the most recent data. The provided date should be in the format: "YYYY-MM-DD HH:MM". Where: * "YYYY" is the year. * "MM" is the numeric representation of the month. * "DD" is the day of the month. * "HH" is the hour. * "MM" is the minutes. The hour and minutes parameters can be omitted. The time should be provided in machine local time zone. Specifying dates prior to en- abling this feature will result in scrubbing starting from the date the pool was created. If the time was moved backward manually the data range may become inaccurate. EXAMPLES Example 1 Status of pool with ongoing scrub: # zpool status ... scan: scrub in progress since Sun Jul 25 16:07:49 2021 403M / 405M scanned at 100M/s, 68.4M / 405M issued at 10.0M/s 0B repaired, 16.91% done, 00:00:04 to go ... Where metadata which references 403M of file data has been scanned at 100M/s, and 68.4M of that file data has been scrubbed sequentially at 10.0M/s. PERIODIC SCRUB On machines using systemd, scrub timers can be enabled on per-pool basis. weekly and monthly timer units are provided. systemctl enable zfs-scrub-weekly@rpool.timer --now systemctl enable zfs-scrub-monthly@otherpool.timer --now SEE ALSO systemd.timer(5), zpool-iostat(8), zpool-resilver(8), zpool-status(8) FreeBSD ports 15.quarterly August 6, 2025 ZPOOL-SCRUB(8)
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | EXAMPLES | PERIODIC SCRUB | SEE ALSO
Want to link to this manual page? Use this URL:
<https://man.freebsd.org/cgi/man.cgi?query=zpool-scrub&sektion=8&manpath=FreeBSD+15.1-RELEASE+and+Ports.quarterly>